Skip to content
Permalink
s905_6.0.1_mas…
Switch branches/tags
Go to file
 
 
Cannot retrieve contributors at this time
138 lines (115 sloc) 4.95 KB
ODROIDC2-UBOOT-CONFIG
setenv dtbaddr 0x1000000
setenv loadaddr 0x20000000
# Resolution Configuration
# 'hdmimode' must be one of below to configure display resolution within
# supported by your TV or monitor.
# Symbol | Resolution
# ----------------------+-------------
# "480x320p60hz" | 480x320 Progressive 60Hz
# "480p60hz" | 720x480 Progressive 60Hz
# "576p50hz" | 720x576 Progressive 50Hz
# "720p60hz" | 1280x720 Progressive 60Hz
# "720p50hz" | 1280x720 Progressive 50Hz
# "1080p60hz" | 1920x1080 Progressive 60Hz
# "1080p50hz" | 1920x1080 Progressive 50Hz
# "1080p30hz" | 1920x1080 Progressive 30Hz
# "1080p24hz" | 1920x1080 Progressive 24Hz
# "1080i60hz" | 1920x1080 Interlaced 60Hz
# "1080i50hz" | 1920x1080 Interlaced 50Hz
# "2160p60hz" | 3840x2160 Progressive 60Hz
# "2160p50hz" | 3840x2160 Progressive 50Hz
# "2160p30hz" | 3840x2160 Progressive 30Hz
# "2160p25hz" | 3840x2160 Progressive 25Hz
# "2160p24hz" | 3840x2160 Progressive 24Hz
# "2160p60hz420" | 3840x2160 Progressive 60Hz YCbCr 4:2:0
# "2160p50hz420" | 3840x2160 Progressive 50Hz YCbCr 4:2:0
# "640x480p60hz" | 640x480 Progressive 60Hz
# "800x480p60hz" | 800x480 Progressive 60Hz
# "800x600p60hz" | 800x600 Progressive 60Hz
# "1024x600p60hz" | 1024x600 Progressive 60Hz
# "1024x768p60hz" | 1024x768 Progressive 60Hz
# "1280x800p60hz" | 1280x800 Progressive 60Hz
# "1280x1024p60hz" | 1280x1024 Progressive 60Hz
# "1360x768p60hz" | 1360x768 Progressive 60Hz
# "1440x900p60hz" | 1440x900 Progressive 60Hz
# "1600x900p60hz" | 1600x900 Progressive 60Hz
# "1600x1200p60hz" | 1600x1200 Progressive 60Hz
# "1680x1050p60hz" | 1680x1050 Progressive 60Hz
# "1920x1200p60hz" | 1920x1200 Progressive 60Hz
# "2560x1080p60hz" | 2560x1080 Progressive 60Hz
# "2560x1440p60hz" | 2560x1440 Progressive 60Hz
# "2560x1600p60hz" | 2560x1600 Progressive 60Hz
# "3440x1440p60hz" | 3440x1440 Progressive 60Hz
setenv hdmimode "1080p60hz"
setenv rootopt "root=/dev/mmcblk0p2 rw init=/init rootwait"
setenv consoleopt "console=ttyS0,115200"
setenv androidopt "androidboot.hardware=odroidc2 androidboot.serialno=${fbt_id#}"
setenv logoopt "osd1,loaded,${fb_addr},${hdmimode}"
setenv selinuxopt "androidboot.selinux=disabled"
# HDMI/DVI Mode Configuration
# This will enforce the signal type of display
# "hdmi" - For HDMI interface
# "dvi" - For DVI interface
setenv vout_mode "hdmi"
# Display Auto Detection
# "false" or "true"
setenv display_autodetect "true"
# HPD enable/disable option
setenv disablehpd "false"
# Overscan offset configuration
# All offsets are zero and can be tuned by manual or ODROID Utility
setenv overscan_top "0"
setenv overscan_left "0"
setenv overscan_bottom "0"
setenv overscan_right "0"
setenv led_onoff "on"
suspend_hdmiphy=0
# Force HDMI to use RGB colorspace regardless of TV request
setenv hdmi_forcergb "0" # Disabled
# setenv hdmi_forcergb "1" # Enabled
# max cpu frequency in dvfs table / in MHz unit
# setenv max_freq "2016" # 2.016GHz
# setenv max_freq "1944" # 1.944GHz
# setenv max_freq "1920" # 1.920GHz
# setenv max_freq "1896" # 1.896GHz
# setenv max_freq "1752" # 1.752GHz
# setenv max_freq "1680" # 1.680GHz
# setenv max_freq "1656" # 1.656GHz
# setenv max_freq "1536" # 1.536GHz
setenv max_freq "1536"
# max cpu-cores
# setenv maxcpus "1"
# setenv maxcpus "2"
# setenv maxcpus "3"
setenv maxcpus "4"
# disable vu7
setenv disable_vu7 "false"
# invert touch screen x,y
setenv touch_invert_x "false"
setenv touch_invert_y "false"
# gpio power key : J2 (2x20) Pin#35, GPIOY.BIT3
#setenv gpiopower "214"
# usb timing tweak
setenv usbmulticam "false"
setenv hdmitx "hdmitx=${cecconfig}"
if test "${hdmi_forcergb}" = "1"; then setenv hdmitx "hdmitx=forcergb"; fi
if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi
if test "${hdmimode}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
# Enable backlight_pwm
# disable : backlight "no"
# ODROID-VU5/7 : backlight "yes"
# ODROID-VU8 : backlight "invert"
setenv backlight_pwm "no"
setenv test_mt_vid "0000"
setenv test_mt_pid "0000"
showddrclk
setenv bootargs "${rootopt} ${consoleopt} hdmimode=${hdmimode} ${cmode} ${hdmitx} vout=${vout_mode} disablehpd=${disablehpd} logo=${logoopt} ${androidopt} ${selinuxopt} suspend_hdmiphy=${suspend_hdmiphy} led_onoff=${led_onoff} max_freq=${max_freq} maxcpus=${maxcpus} disable_vu7=${disable_vu7} touch_invert_x=${touch_invert_x} touch_invert_y=${touch_invert_y} usbmulticam=${usbmulticam} gpiopower=${gpiopower} backlight_pwm=${backlight_pwm} ddrclock=${ddrclock} test_mt_pid=${test_mt_pid} test_mt_vid=${test_mt_vid}"
save
showlogo ${hdmimode}
#usb pwren
movi read dtb 0 ${dtbaddr}
# load kernel from vat or boot partition.
movi read boot 0 ${loadaddr}
#fatload mmc 0:1 ${loadaddr} Image_android
booti ${loadaddr} - ${dtbaddr}