A small python wrapper for dnspython to query information from DNS
This library requires the following to be setup before you can use this library.
- You must be using
bind 9>=9.10.3as this library was only tested against this version of bind.
This section contains examples how you might use this library
$ dnsq --query '192\.168\.1' --domain foo-domain.com --nameserver 67.77.255.142 --sort-by hostname
aa-foo-01 A 192.168.1.22
dc-app-01 A 192.168.1.20
dc-app-02 A 192.168.1.21
ns1 A 192.168.1.10
ns2 A 192.168.1.11
zz-bar-01 A 192.168.1.23
$ dnsq --query '192\.168\.1' --domain foo-domain.com --nameserver 67.77.255.142 --sort-by ip
192.168.1.10 A ns1
192.168.1.11 A ns2
192.168.1.20 A dc-app-01
192.168.1.21 A dc-app-02
192.168.1.22 A aa-foo-01
192.168.1.23 A zz-bar-01
$ dnsq --supports-axfr -d foo-domain.com -n 67.77.255.142
$ echo $?
0
$ dnsq --supports-axfr -d some-special-domain-that-exists.com -n 67.77.255.142
$ echo $?
1
- NOTE: This uses your default resolver
$ dnsq --supports-axfr
$ dnsq --type soa --domain foo-domain.com --nameserver 67.77.255.142
ns1.foo-domain.com. root.foo-domain.com. 2018070500 28800 3600 604800 86400
$ dnsq --type soa
ns1.foo-domain.com. root.foo-domain.com. 2018070500 28800 3600 604800 86400
$ dnsq --type ns --domain foo-domain.com --nameserver 67.77.255.142
ns1.foo-domain.com. ns2.foo-domain.com.
$ dnsq -t ns
ns1.foo-domain.com. ns2.foo-domain.com.
- This tests that a zone transfer can be performed
- and if succesful, performs the zone transfer and echos the results
$ dnsq --type zone-transfer --domain foo-domain.com --nameserver 67.77.255.142
@ 7200 IN SOA ns1 root 2018070500 28800 3600 604800 86400
@ 7200 IN NS ns1
@ 7200 IN NS ns2
aa-foo-01 7200 IN A 192.168.1.22
app-01 7200 IN CNAME dc-app-01
dc-app-01 7200 IN A 192.168.1.20
dc-app-02 7200 IN A 192.168.1.21
dns1 7200 IN CNAME ns1
dns2 7200 IN CNAME ns2
ns1 7200 IN A 192.168.1.10
ns2 7200 IN A 192.168.1.11
zz-bar-01 7200 IN A 192.168.1.23
- Create a new virtualenv and set the project directory
cd python-dnsq
.ci/init-pyenv
- Run the tests to see if they work before doing anything else
invoke test
- dnspython has not had a new release since 2016 and there are quiet a few open issues that have not been addressed.
- This library is pretty robust and attempts to address and handle/catch exceptions as they are documented via the dnspython API, however, there are times when it just plain pukes all over the place and you'll need to re-run your command again.
- Got there error one attempting to run a zone transfer query.
- The solution in this case was just wait a hot second and try again.
$ dnsq --query 'dc-app-01.*' -d foo-domain.com -n 67.77.255.142
Traceback (most recent call last):
File "~/.pyenv/versions/python-dnsq-2.7.15/bin/dnsq", line 7, in <module>
exec(compile(f.read(), __file__, 'exec'))
File "~/prj/python-dnsq/bin/dnsq", line 13, in <module>
cli.execute(sys.argv[1:])
File "ne/prj/python-dnsq/dnsq/cli.py", line 109, in execute
assert dnsq.supports_zone_transfer(domain=options.domain, nameserver=options.nameserver, timeout=options.timeout), err_msg
File "~/prj/python-dnsq/dnsq/__init__.py", line 190, in supports_zone_transfer
[x for x in zone_transfer(nameserver=nameserver, domain=domain, timeout=timeout, *args, **kwargs)]
File "~prj/python-dnsq/dnsq/__init__.py", line 213, in zone_transfer
zone = dns.zone.from_xfr(axfr)
File "~/.pyenv/versions/2.7.15/envs/python-dnsq-2.7.15/lib/python2.7/site-packages/dns/zone.py", line 1066, in from_xfr
for r in xfr:
File "~/.pyenv/versions/2.7.15/envs/python-dnsq-2.7.15/lib/python2.7/site-packages/dns/query.py", line 476, in xfr
ldata = _net_read(s, 2, mexpiration)
File "~/.pyenv/versions/2.7.15/envs/python-dnsq-2.7.15/lib/python2.7/site-packages/dns/query.py", line 273, in _net_read
n = sock.recv(count)
- This error doesn't appear to happen very often but only when you are trying to run tests. So far there is no easy way to fix this error.
$ dnsq -t ns -n 67.77.255.142 -d foo-domain.com --timeout 8.0
AssertionError: Traceback (most recent call last):
File "~/prj/python-dnsq/.tox/py27/bin/dnsq", line 7, in <module>
exec(compile(f.read(), __file__, 'exec'))
File "~/prj/python-dnsq/bin/dnsq", line 13, in <module>
cli.execute(sys.argv[1:])
File "~/prj/python-dnsq/dnsq/cli.py", line 146, in execute
recs = dnsq.ns_records(resolver, domain=options.domain)
File "~/prj/python-dnsq/dnsq/__init__.py", line 143, in ns_records
results = [x.to_text() for x in resolver.query(domain, 'NS', *args, **kwargs)]
File "~/prj/python-dnsq/.tox/py27/lib/python2.7/site-packages/dns/resolver.py", line 1041, in query
timeout = self._compute_timeout(start)
File "~/prj/python-dnsq/.tox/py27/lib/python2.7/site-packages/dns/resolver.py", line 858, in _compute_timeout
raise Timeout(timeout=duration)
dns.exception.Timeout: The DNS operation timed out after 8.00094914436 seconds
$ git clone git@github.com:codylane/python-dnsq.git dnsq
sudo apt-get install -y \
build-essential \
curl \
git \
libapt-pkg-dev \
libbz2-dev \
libffi-dev \
libncurses5-dev \
libncursesw5-dev \
libreadline-dev \
libsqlite3-dev \
libssl-dev \
llvm \
make \
tk-dev \
wget \
xz-utils \
zlib1g-dev \
dnsutils \
ntp \
ntpdate
sudo apt-get install -y \
build-essential \
curl \
git \
libapt-pkg-dev \
libbz2-dev \
libffi-dev \
libncurses5-dev \
libncursesw5-dev \
libreadline-dev \
libsqlite3-dev \
libssl1.0-dev \
llvm \
make \
tk-dev \
wget \
xz-utils \
zlib1g-dev \
dnsutils \
ntp \
ntpdate
sudo yum install -y \
epel-release \
centos-release-scl && \
sudo yum clean expire-cache && \
sudo yum install -y \
autoconf \
automake \
bzip2 \
bzip2-devel \
cmake \
ctags \
db4-devel \
expat-devel \
git \
gcc \
gcc-c++ \
gdbm-devel \
kernel-devel \
libffi-devel \
libpcap-devel \
libtool \
make \
ncurses-devel \
openssl-devel \
patch \
patchutils \
pkgconfig \
python-devel \
python-setuptools \
readline-devel \
sqlite \
sqlite-devel \
sqlite2-devel \
tk-devel \
zlib-devel \
xz \
xz-devel
.ci/init-pyenv
- Add this to your shell
export PYENV_ROOT="${HOME}/.pyenv"
export PATH="${PYENV_ROOT}/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:${PATH}"
[ -d "${PYENV_ROOT}" ] || git clone https://github.com/pyenv/pyenv.git ${PYENV_ROOT}
[ -d "${PYENV_ROOT}/plugins/pyenv-virtualenv" ] || git clone https://github.com/pyenv/pyenv-virtualenv.git "${PYENV_ROOT}/plugins/pyenv-virtualenv"
[ -d "${PYENV_ROOT}" ] && eval "$(pyenv init -)"
[ -d "${PYENV_ROOT}/plugins/pyenv-virtualenv" ] && eval "$(pyenv virtualenv-init -)"
- Logout of your shell and re-login in, then cd to this directory again.
$ cd python-dnsq/
(python-dnsq-2.7.15) $ dnsq -h
usage: dnsq [-h] [--version] [-t {ns,soa,axfr,zone-transfer}] [-d DOMAIN]
[-n NAMESERVER] [-q QUERY] [--sort-by {hostname,ip}] [-v]
[--timeout TIMEOUT] [--supports-axfr]
A python DNS tool for doing fun things with DNS
optional arguments:
-h, --help show this help message and exit
--version Display dnsq version
-t {ns,soa,axfr,zone-transfer}, --type {ns,soa,axfr,zone-transfer}
A type of query to make
-d DOMAIN, --domain DOMAIN
The domain to query. Default "foo-example.com."
-n NAMESERVER, --nameserver NAMESERVER
The nameserver to query. Default "192.168.1.88"
-q QUERY, --query QUERY
Query and filter the zone transfer for a particular
record
--sort-by {hostname,ip}
Only used with QUERY option, allows sorting the
results. Default "hostname"
-v, --verbose Turn on verbose logging, -v=INFO, -vv=DEBUG
--timeout TIMEOUT The timeout to wait for a response from the
nameserver. Default 20.0
--supports-axfr, --supports-zone-transfer
If domain supports a zone transfer exit 0, otherwise
exit 1
- Cody Lane - 2018