diff --git a/README.md b/README.md index e0ee78a..e7d8827 100644 --- a/README.md +++ b/README.md @@ -147,13 +147,21 @@ application.conf might look like the following: acceptance_test { cassandra-seed-address: "127.0.0.1" cassandra-keyspace-name: "pillar_acceptance_test" + cassandra-port: "9042" + cassandra-ssl: "true" } } [typesafeconfig]:https://github.com/typesafehub/config -Alternatively, Pillar accepts the Cassandra seed address from the CASSANDRA_SEED_ADDRESS environment variable. If set, -the CASSANDRA_SEED_ADDRESS environment variable takes precedence over application.conf. +Alternatively, Pillar accepts environment variable overrides according to the following table. + +| Key | Environment Variable | Default | +|------------------------------------------------|----------------------|---------| +| pillar.\.\.cassandra-seed-address | PILLAR_SEED_ADDRESS | | +| pillar.\.\.cassandra-keyspace-name | | | +| pillar.\.\.cassandra-port | PILLAR_PORT | 9042 | +| pillar.\.\.cassandra-ssl | PILLAR_SSL | false | Reference the acceptance spec suite for details. diff --git a/src/main/scala/com/chrisomeara/pillar/cli/App.scala b/src/main/scala/com/chrisomeara/pillar/cli/App.scala index 5f8c8e0..fdffde4 100644 --- a/src/main/scala/com/chrisomeara/pillar/cli/App.scala +++ b/src/main/scala/com/chrisomeara/pillar/cli/App.scala @@ -36,11 +36,21 @@ class App(reporter: Reporter) { case Some(s) => s case _ => getFromConfiguration(configuration, dataStoreName, environment, "cassandra-seed-address") } - val port = Integer.valueOf(getFromConfiguration(configuration, dataStoreName, environment, "cassandra-port", Some(9042.toString))) - val builder = Cluster.builder().addContactPoint(seedAddress).withPort(port).build() + val port = Integer.valueOf(sys.env.get("PILLAR_PORT") match { + case Some(s) => s + case _ => getFromConfiguration(configuration, dataStoreName, environment, "cassandra-port", Some(9042.toString)) + }) + val builder = Cluster.builder().addContactPoint(seedAddress).withPort(port) + if(sys.env.get("PILLAR_SSL") match { + case Some(s) => s.toBoolean + case None => getFromConfiguration(configuration, dataStoreName, environment, "cassandra-ssl", Some("false")).toBoolean + }) { + builder.withSSL() + } + val cluster = builder.build() val session = commandLineConfiguration.command match { - case Initialize => builder.connect() - case _ => builder.connect(keyspace) + case Initialize => cluster.connect() + case _ => cluster.connect(keyspace) } val command = Command(commandLineConfiguration.command, session, keyspace, commandLineConfiguration.timeStampOption, registry) diff --git a/src/test/resources/docker/cassandra-2.1/Dockerfile b/src/test/resources/docker/cassandra-2.1/Dockerfile new file mode 100644 index 0000000..a09e7f9 --- /dev/null +++ b/src/test/resources/docker/cassandra-2.1/Dockerfile @@ -0,0 +1,3 @@ +FROM cassandra:2.1 + +ADD contents / diff --git a/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/cassandra.yaml b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/cassandra.yaml new file mode 100644 index 0000000..57978b7 --- /dev/null +++ b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/cassandra.yaml @@ -0,0 +1,818 @@ +# Cassandra storage config YAML + +# NOTE: +# See http://wiki.apache.org/cassandra/StorageConfiguration for +# full explanations of configuration directives +# /NOTE + +# The name of the cluster. This is mainly used to prevent machines in +# one logical cluster from joining another. +cluster_name: 'Test Cluster' + +# This defines the number of tokens randomly assigned to this node on the ring +# The more tokens, relative to other nodes, the larger the proportion of data +# that this node will store. You probably want all nodes to have the same number +# of tokens assuming they have equal hardware capability. +# +# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility, +# and will use the initial_token as described below. +# +# Specifying initial_token will override this setting on the node's initial start, +# on subsequent starts, this setting will apply even if initial token is set. +# +# If you already have a cluster with 1 token per node, and wish to migrate to +# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations +num_tokens: 256 + +# initial_token allows you to specify tokens manually. While you can use # it with +# vnodes (num_tokens > 1, above) -- in which case you should provide a +# comma-separated list -- it's primarily used when adding nodes # to legacy clusters +# that do not have vnodes enabled. +# initial_token: + +# See http://wiki.apache.org/cassandra/HintedHandoff +# May either be "true" or "false" to enable globally, or contain a list +# of data centers to enable per-datacenter. +# hinted_handoff_enabled: DC1,DC2 +hinted_handoff_enabled: true +# this defines the maximum amount of time a dead host will have hints +# generated. After it has been dead this long, new hints for it will not be +# created until it has been seen alive and gone down again. +max_hint_window_in_ms: 10800000 # 3 hours +# Maximum throttle in KBs per second, per delivery thread. This will be +# reduced proportionally to the number of nodes in the cluster. (If there +# are two nodes in the cluster, each delivery thread will use the maximum +# rate; if there are three, each will throttle to half of the maximum, +# since we expect two nodes to be delivering hints simultaneously.) +hinted_handoff_throttle_in_kb: 1024 +# Number of threads with which to deliver hints; +# Consider increasing this number when you have multi-dc deployments, since +# cross-dc handoff tends to be slower +max_hints_delivery_threads: 2 + +# Maximum throttle in KBs per second, total. This will be +# reduced proportionally to the number of nodes in the cluster. +batchlog_replay_throttle_in_kb: 1024 + +# Authentication backend, implementing IAuthenticator; used to identify users +# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator, +# PasswordAuthenticator}. +# +# - AllowAllAuthenticator performs no checks - set it to disable authentication. +# - PasswordAuthenticator relies on username/password pairs to authenticate +# users. It keeps usernames and hashed passwords in system_auth.credentials table. +# Please increase system_auth keyspace replication factor if you use this authenticator. +authenticator: AllowAllAuthenticator + +# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions +# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer, +# CassandraAuthorizer}. +# +# - AllowAllAuthorizer allows any action to any user - set it to disable authorization. +# - CassandraAuthorizer stores permissions in system_auth.permissions table. Please +# increase system_auth keyspace replication factor if you use this authorizer. +authorizer: AllowAllAuthorizer + +# Validity period for permissions cache (fetching permissions can be an +# expensive operation depending on the authorizer, CassandraAuthorizer is +# one example). Defaults to 2000, set to 0 to disable. +# Will be disabled automatically for AllowAllAuthorizer. +permissions_validity_in_ms: 2000 + +# Refresh interval for permissions cache (if enabled). +# After this interval, cache entries become eligible for refresh. Upon next +# access, an async reload is scheduled and the old value returned until it +# completes. If permissions_validity_in_ms is non-zero, then this must be +# also. +# Defaults to the same value as permissions_validity_in_ms. +# permissions_update_interval_in_ms: 1000 + +# The partitioner is responsible for distributing groups of rows (by +# partition key) across nodes in the cluster. You should leave this +# alone for new clusters. The partitioner can NOT be changed without +# reloading all data, so when upgrading you should set this to the +# same partitioner you were already using. +# +# Besides Murmur3Partitioner, partitioners included for backwards +# compatibility include RandomPartitioner, ByteOrderedPartitioner, and +# OrderPreservingPartitioner. +# +partitioner: org.apache.cassandra.dht.Murmur3Partitioner + +# Directories where Cassandra should store data on disk. Cassandra +# will spread data evenly across them, subject to the granularity of +# the configured compaction strategy. +# If not set, the default directory is $CASSANDRA_HOME/data/data. +data_file_directories: + - /var/lib/cassandra/data + +# commit log. when running on magnetic HDD, this should be a +# separate spindle than the data directories. +# If not set, the default directory is $CASSANDRA_HOME/data/commitlog. +commitlog_directory: /var/lib/cassandra/commitlog + +# policy for data disk failures: +# die: shut down gossip and client transports and kill the JVM for any fs errors or +# single-sstable errors, so the node can be replaced. +# stop_paranoid: shut down gossip and client transports even for single-sstable errors, +# kill the JVM for errors during startup. +# stop: shut down gossip and client transports, leaving the node effectively dead, but +# can still be inspected via JMX, kill the JVM for errors during startup. +# best_effort: stop using the failed disk and respond to requests based on +# remaining available sstables. This means you WILL see obsolete +# data at CL.ONE! +# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra +disk_failure_policy: stop + +# policy for commit disk failures: +# die: shut down gossip and Thrift and kill the JVM, so the node can be replaced. +# stop: shut down gossip and Thrift, leaving the node effectively dead, but +# can still be inspected via JMX. +# stop_commit: shutdown the commit log, letting writes collect but +# continuing to service reads, as in pre-2.0.5 Cassandra +# ignore: ignore fatal errors and let the batches fail +commit_failure_policy: stop + +# Maximum size of the key cache in memory. +# +# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the +# minimum, sometimes more. The key cache is fairly tiny for the amount of +# time it saves, so it's worthwhile to use it at large numbers. +# The row cache saves even more time, but must contain the entire row, +# so it is extremely space-intensive. It's best to only use the +# row cache if you have hot rows or static rows. +# +# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. +# +# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache. +key_cache_size_in_mb: + +# Duration in seconds after which Cassandra should +# save the key cache. Caches are saved to saved_caches_directory as +# specified in this configuration file. +# +# Saved caches greatly improve cold-start speeds, and is relatively cheap in +# terms of I/O for the key cache. Row cache saving is much more expensive and +# has limited use. +# +# Default is 14400 or 4 hours. +key_cache_save_period: 14400 + +# Number of keys from the key cache to save +# Disabled by default, meaning all keys are going to be saved +# key_cache_keys_to_save: 100 + +# Maximum size of the row cache in memory. +# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. +# +# Default value is 0, to disable row caching. +row_cache_size_in_mb: 0 + +# Duration in seconds after which Cassandra should +# save the row cache. Caches are saved to saved_caches_directory as specified +# in this configuration file. +# +# Saved caches greatly improve cold-start speeds, and is relatively cheap in +# terms of I/O for the key cache. Row cache saving is much more expensive and +# has limited use. +# +# Default is 0 to disable saving the row cache. +row_cache_save_period: 0 + +# Number of keys from the row cache to save +# Disabled by default, meaning all keys are going to be saved +# row_cache_keys_to_save: 100 + +# Maximum size of the counter cache in memory. +# +# Counter cache helps to reduce counter locks' contention for hot counter cells. +# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before +# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration +# of the lock hold, helping with hot counter cell updates, but will not allow skipping +# the read entirely. Only the local (clock, count) tuple of a counter cell is kept +# in memory, not the whole counter, so it's relatively cheap. +# +# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. +# +# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache. +# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache. +counter_cache_size_in_mb: + +# Duration in seconds after which Cassandra should +# save the counter cache (keys only). Caches are saved to saved_caches_directory as +# specified in this configuration file. +# +# Default is 7200 or 2 hours. +counter_cache_save_period: 7200 + +# Number of keys from the counter cache to save +# Disabled by default, meaning all keys are going to be saved +# counter_cache_keys_to_save: 100 + +# The off-heap memory allocator. Affects storage engine metadata as +# well as caches. Experiments show that JEMAlloc saves some memory +# than the native GCC allocator (i.e., JEMalloc is more +# fragmentation-resistant). +# +# Supported values are: NativeAllocator, JEMallocAllocator +# +# If you intend to use JEMallocAllocator you have to install JEMalloc as library and +# modify cassandra-env.sh as directed in the file. +# +# Defaults to NativeAllocator +# memory_allocator: NativeAllocator + +# saved caches +# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches. +saved_caches_directory: /var/lib/cassandra/saved_caches + +# commitlog_sync may be either "periodic" or "batch." +# +# When in batch mode, Cassandra won't ack writes until the commit log +# has been fsynced to disk. It will wait +# commitlog_sync_batch_window_in_ms milliseconds between fsyncs. +# This window should be kept short because the writer threads will +# be unable to do extra work while waiting. (You may need to increase +# concurrent_writes for the same reason.) +# +# commitlog_sync: batch +# commitlog_sync_batch_window_in_ms: 2 +# +# the other option is "periodic" where writes may be acked immediately +# and the CommitLog is simply synced every commitlog_sync_period_in_ms +# milliseconds. +commitlog_sync: periodic +commitlog_sync_period_in_ms: 10000 + +# The size of the individual commitlog file segments. A commitlog +# segment may be archived, deleted, or recycled once all the data +# in it (potentially from each columnfamily in the system) has been +# flushed to sstables. +# +# The default size is 32, which is almost always fine, but if you are +# archiving commitlog segments (see commitlog_archiving.properties), +# then you probably want a finer granularity of archiving; 8 or 16 MB +# is reasonable. +commitlog_segment_size_in_mb: 32 + +# Reuse commit log files when possible. The default is false, and this +# feature will be removed entirely in future versions of Cassandra. +#commitlog_segment_recycling: false + +# any class that implements the SeedProvider interface and has a +# constructor that takes a Map of parameters will do. +seed_provider: + # Addresses of hosts that are deemed contact points. + # Cassandra nodes use this list of hosts to find each other and learn + # the topology of the ring. You must change this if you are running + # multiple nodes! + - class_name: org.apache.cassandra.locator.SimpleSeedProvider + parameters: + # seeds is actually a comma-delimited list of addresses. + # Ex: ",," + - seeds: "172.17.0.2" + +# For workloads with more data than can fit in memory, Cassandra's +# bottleneck will be reads that need to fetch data from +# disk. "concurrent_reads" should be set to (16 * number_of_drives) in +# order to allow the operations to enqueue low enough in the stack +# that the OS and drives can reorder them. Same applies to +# "concurrent_counter_writes", since counter writes read the current +# values before incrementing and writing them back. +# +# On the other hand, since writes are almost never IO bound, the ideal +# number of "concurrent_writes" is dependent on the number of cores in +# your system; (8 * number_of_cores) is a good rule of thumb. +concurrent_reads: 32 +concurrent_writes: 32 +concurrent_counter_writes: 32 + +# Total memory to use for sstable-reading buffers. Defaults to +# the smaller of 1/4 of heap or 512MB. +# file_cache_size_in_mb: 512 + +# Total permitted memory to use for memtables. Cassandra will stop +# accepting writes when the limit is exceeded until a flush completes, +# and will trigger a flush based on memtable_cleanup_threshold +# If omitted, Cassandra will set both to 1/4 the size of the heap. +# memtable_heap_space_in_mb: 2048 +# memtable_offheap_space_in_mb: 2048 + +# Ratio of occupied non-flushing memtable size to total permitted size +# that will trigger a flush of the largest memtable. Lager mct will +# mean larger flushes and hence less compaction, but also less concurrent +# flush activity which can make it difficult to keep your disks fed +# under heavy write load. +# +# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1) +# memtable_cleanup_threshold: 0.11 + +# Specify the way Cassandra allocates and manages memtable memory. +# Options are: +# heap_buffers: on heap nio buffers +# offheap_buffers: off heap (direct) nio buffers +# offheap_objects: native memory, eliminating nio buffer heap overhead +memtable_allocation_type: heap_buffers + +# Total space to use for commitlogs. Since commitlog segments are +# mmapped, and hence use up address space, the default size is 32 +# on 32-bit JVMs, and 8192 on 64-bit JVMs. +# +# If space gets above this value (it will round up to the next nearest +# segment multiple), Cassandra will flush every dirty CF in the oldest +# segment and remove it. So a small total commitlog space will tend +# to cause more flush activity on less-active columnfamilies. +# commitlog_total_space_in_mb: 8192 + +# This sets the amount of memtable flush writer threads. These will +# be blocked by disk io, and each one will hold a memtable in memory +# while blocked. +# +# memtable_flush_writers defaults to the smaller of (number of disks, +# number of cores), with a minimum of 2 and a maximum of 8. +# +# If your data directories are backed by SSD, you should increase this +# to the number of cores. +#memtable_flush_writers: 8 + +# A fixed memory pool size in MB for for SSTable index summaries. If left +# empty, this will default to 5% of the heap size. If the memory usage of +# all index summaries exceeds this limit, SSTables with low read rates will +# shrink their index summaries in order to meet this limit. However, this +# is a best-effort process. In extreme conditions Cassandra may need to use +# more than this amount of memory. +index_summary_capacity_in_mb: + +# How frequently index summaries should be resampled. This is done +# periodically to redistribute memory from the fixed-size pool to sstables +# proportional their recent read rates. Setting to -1 will disable this +# process, leaving existing index summaries at their current sampling level. +index_summary_resize_interval_in_minutes: 60 + +# Whether to, when doing sequential writing, fsync() at intervals in +# order to force the operating system to flush the dirty +# buffers. Enable this to avoid sudden dirty buffer flushing from +# impacting read latencies. Almost always a good idea on SSDs; not +# necessarily on platters. +trickle_fsync: false +trickle_fsync_interval_in_kb: 10240 + +# TCP port, for commands and data +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +storage_port: 7000 + +# SSL port, for encrypted communication. Unused unless enabled in +# encryption_options +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +ssl_storage_port: 7001 + +# Address or interface to bind to and tell other Cassandra nodes to connect to. +# You _must_ change this if you want multiple nodes to be able to communicate! +# +# Set listen_address OR listen_interface, not both. Interfaces must correspond +# to a single address, IP aliasing is not supported. +# +# Leaving it blank leaves it up to InetAddress.getLocalHost(). This +# will always do the Right Thing _if_ the node is properly configured +# (hostname, name resolution, etc), and the Right Thing is to use the +# address associated with the hostname (it might not be). +# +# Setting listen_address to 0.0.0.0 is always wrong. +# +# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address +# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4 +# address will be used. If true the first ipv6 address will be used. Defaults to false preferring +# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6. +listen_address: 172.17.0.2 +# listen_interface: eth0 +# listen_interface_prefer_ipv6: false + +# Address to broadcast to other Cassandra nodes +# Leaving this blank will set it to the same value as listen_address +broadcast_address: 172.17.0.2 + +# Internode authentication backend, implementing IInternodeAuthenticator; +# used to allow/disallow connections from peer nodes. +# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator + +# Whether to start the native transport server. +# Please note that the address on which the native transport is bound is the +# same as the rpc_address. The port however is different and specified below. +start_native_transport: true +# port for the CQL native transport to listen for clients on +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +native_transport_port: 9042 +# The maximum threads for handling requests when the native transport is used. +# This is similar to rpc_max_threads though the default differs slightly (and +# there is no native_transport_min_threads, idle threads will always be stopped +# after 30 seconds). +# native_transport_max_threads: 128 +# +# The maximum size of allowed frame. Frame (requests) larger than this will +# be rejected as invalid. The default is 256MB. +# native_transport_max_frame_size_in_mb: 256 + +# The maximum number of concurrent client connections. +# The default is -1, which means unlimited. +# native_transport_max_concurrent_connections: -1 + +# The maximum number of concurrent client connections per source ip. +# The default is -1, which means unlimited. +# native_transport_max_concurrent_connections_per_ip: -1 + +# Whether to start the thrift rpc server. +start_rpc: true + +# The address or interface to bind the Thrift RPC service and native transport +# server to. +# +# Set rpc_address OR rpc_interface, not both. Interfaces must correspond +# to a single address, IP aliasing is not supported. +# +# Leaving rpc_address blank has the same effect as on listen_address +# (i.e. it will be based on the configured hostname of the node). +# +# Note that unlike listen_address, you can specify 0.0.0.0, but you must also +# set broadcast_rpc_address to a value other than 0.0.0.0. +# +# For security reasons, you should not expose this port to the internet. Firewall it if needed. +# +# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address +# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4 +# address will be used. If true the first ipv6 address will be used. Defaults to false preferring +# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6. +rpc_address: 0.0.0.0 +# rpc_interface: eth1 +# rpc_interface_prefer_ipv6: false + +# port for Thrift to listen for clients on +rpc_port: 9160 + +# RPC address to broadcast to drivers and other Cassandra nodes. This cannot +# be set to 0.0.0.0. If left blank, this will be set to the value of +# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must +# be set. +broadcast_rpc_address: 172.17.0.2 + +# enable or disable keepalive on rpc/native connections +rpc_keepalive: true + +# Cassandra provides two out-of-the-box options for the RPC Server: +# +# sync -> One thread per thrift connection. For a very large number of clients, memory +# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size +# per thread, and that will correspond to your use of virtual memory (but physical memory +# may be limited depending on use of stack space). +# +# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled +# asynchronously using a small number of threads that does not vary with the amount +# of thrift clients (and thus scales well to many clients). The rpc requests are still +# synchronous (one thread per active request). If hsha is selected then it is essential +# that rpc_max_threads is changed from the default value of unlimited. +# +# The default is sync because on Windows hsha is about 30% slower. On Linux, +# sync/hsha performance is about the same, with hsha of course using less memory. +# +# Alternatively, can provide your own RPC server by providing the fully-qualified class name +# of an o.a.c.t.TServerFactory that can create an instance of it. +rpc_server_type: sync + +# Uncomment rpc_min|max_thread to set request pool size limits. +# +# Regardless of your choice of RPC server (see above), the number of maximum requests in the +# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync +# RPC server, it also dictates the number of clients that can be connected at all). +# +# The default is unlimited and thus provides no protection against clients overwhelming the server. You are +# encouraged to set a maximum that makes sense for you in production, but do keep in mind that +# rpc_max_threads represents the maximum number of client requests this server may execute concurrently. +# +# rpc_min_threads: 16 +# rpc_max_threads: 2048 + +# uncomment to set socket buffer sizes on rpc connections +# rpc_send_buff_size_in_bytes: +# rpc_recv_buff_size_in_bytes: + +# Uncomment to set socket buffer size for internode communication +# Note that when setting this, the buffer size is limited by net.core.wmem_max +# and when not setting it it is defined by net.ipv4.tcp_wmem +# See: +# /proc/sys/net/core/wmem_max +# /proc/sys/net/core/rmem_max +# /proc/sys/net/ipv4/tcp_wmem +# /proc/sys/net/ipv4/tcp_wmem +# and: man tcp +# internode_send_buff_size_in_bytes: +# internode_recv_buff_size_in_bytes: + +# Frame size for thrift (maximum message length). +thrift_framed_transport_size_in_mb: 15 + +# Set to true to have Cassandra create a hard link to each sstable +# flushed or streamed locally in a backups/ subdirectory of the +# keyspace data. Removing these links is the operator's +# responsibility. +incremental_backups: false + +# Whether or not to take a snapshot before each compaction. Be +# careful using this option, since Cassandra won't clean up the +# snapshots for you. Mostly useful if you're paranoid when there +# is a data format change. +snapshot_before_compaction: false + +# Whether or not a snapshot is taken of the data before keyspace truncation +# or dropping of column families. The STRONGLY advised default of true +# should be used to provide data safety. If you set this flag to false, you will +# lose data on truncation or drop. +auto_snapshot: true + +# When executing a scan, within or across a partition, we need to keep the +# tombstones seen in memory so we can return them to the coordinator, which +# will use them to make sure other replicas also know about the deleted rows. +# With workloads that generate a lot of tombstones, this can cause performance +# problems and even exaust the server heap. +# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets) +# Adjust the thresholds here if you understand the dangers and want to +# scan more tombstones anyway. These thresholds may also be adjusted at runtime +# using the StorageService mbean. +tombstone_warn_threshold: 1000 +tombstone_failure_threshold: 100000 + +# Granularity of the collation index of rows within a partition. +# Increase if your rows are large, or if you have a very large +# number of rows per partition. The competing goals are these: +# 1) a smaller granularity means more index entries are generated +# and looking up rows withing the partition by collation column +# is faster +# 2) but, Cassandra will keep the collation index in memory for hot +# rows (as part of the key cache), so a larger granularity means +# you can cache more hot rows +column_index_size_in_kb: 64 + + +# Log WARN on any batch size exceeding this value. 5kb per batch by default. +# Caution should be taken on increasing the size of this threshold as it can lead to node instability. +batch_size_warn_threshold_in_kb: 5 + + +# Log WARN on any batches not of type LOGGED than span across more partitions than this limit +unlogged_batch_across_partitions_warn_threshold: 10 + +# Number of simultaneous compactions to allow, NOT including +# validation "compactions" for anti-entropy repair. Simultaneous +# compactions can help preserve read performance in a mixed read/write +# workload, by mitigating the tendency of small sstables to accumulate +# during a single long running compactions. The default is usually +# fine and if you experience problems with compaction running too +# slowly or too fast, you should look at +# compaction_throughput_mb_per_sec first. +# +# concurrent_compactors defaults to the smaller of (number of disks, +# number of cores), with a minimum of 2 and a maximum of 8. +# +# If your data directories are backed by SSD, you should increase this +# to the number of cores. +#concurrent_compactors: 1 + +# Throttles compaction to the given total throughput across the entire +# system. The faster you insert data, the faster you need to compact in +# order to keep the sstable count down, but in general, setting this to +# 16 to 32 times the rate you are inserting data is more than sufficient. +# Setting this to 0 disables throttling. Note that this account for all types +# of compaction, including validation compaction. +compaction_throughput_mb_per_sec: 16 + +# Log a warning when compacting partitions larger than this value +compaction_large_partition_warning_threshold_mb: 100 + +# When compacting, the replacement sstable(s) can be opened before they +# are completely written, and used in place of the prior sstables for +# any range that has been written. This helps to smoothly transfer reads +# between the sstables, reducing page cache churn and keeping hot rows hot +sstable_preemptive_open_interval_in_mb: 50 + +# Throttles all outbound streaming file transfers on this node to the +# given total throughput in Mbps. This is necessary because Cassandra does +# mostly sequential IO when streaming data during bootstrap or repair, which +# can lead to saturating the network connection and degrading rpc performance. +# When unset, the default is 200 Mbps or 25 MB/s. +# stream_throughput_outbound_megabits_per_sec: 200 + +# Throttles all streaming file transfer between the datacenters, +# this setting allows users to throttle inter dc stream throughput in addition +# to throttling all network stream traffic as configured with +# stream_throughput_outbound_megabits_per_sec +# When unset, the default is 200 Mbps or 25 MB/s +# inter_dc_stream_throughput_outbound_megabits_per_sec: 200 + +# How long the coordinator should wait for read operations to complete +read_request_timeout_in_ms: 5000 +# How long the coordinator should wait for seq or index scans to complete +range_request_timeout_in_ms: 10000 +# How long the coordinator should wait for writes to complete +write_request_timeout_in_ms: 2000 +# How long the coordinator should wait for counter writes to complete +counter_write_request_timeout_in_ms: 5000 +# How long a coordinator should continue to retry a CAS operation +# that contends with other proposals for the same row +cas_contention_timeout_in_ms: 1000 +# How long the coordinator should wait for truncates to complete +# (This can be much longer, because unless auto_snapshot is disabled +# we need to flush first so we can snapshot before removing the data.) +truncate_request_timeout_in_ms: 60000 +# The default timeout for other, miscellaneous operations +request_timeout_in_ms: 10000 + +# Enable operation timeout information exchange between nodes to accurately +# measure request timeouts. If disabled, replicas will assume that requests +# were forwarded to them instantly by the coordinator, which means that +# under overload conditions we will waste that much extra time processing +# already-timed-out requests. +# +# Warning: before enabling this property make sure to ntp is installed +# and the times are synchronized between the nodes. +cross_node_timeout: false + +# Set socket timeout for streaming operation. +# The stream session is failed if no data is received by any of the +# participants within that period. +# Default value is 3600000, which means streams timeout after an hour. +# streaming_socket_timeout_in_ms: 3600000 + +# phi value that must be reached for a host to be marked down. +# most users should never need to adjust this. +# phi_convict_threshold: 8 + +# endpoint_snitch -- Set this to a class that implements +# IEndpointSnitch. The snitch has two functions: +# - it teaches Cassandra enough about your network topology to route +# requests efficiently +# - it allows Cassandra to spread replicas around your cluster to avoid +# correlated failures. It does this by grouping machines into +# "datacenters" and "racks." Cassandra will do its best not to have +# more than one replica on the same "rack" (which may not actually +# be a physical location) +# +# IF YOU CHANGE THE SNITCH AFTER DATA IS INSERTED INTO THE CLUSTER, +# YOU MUST RUN A FULL REPAIR, SINCE THE SNITCH AFFECTS WHERE REPLICAS +# ARE PLACED. +# +# IF THE RACK A REPLICA IS PLACED IN CHANGES AFTER THE REPLICA HAS BEEN +# ADDED TO A RING, THE NODE MUST BE DECOMMISSIONED AND REBOOTSTRAPPED. +# +# Out of the box, Cassandra provides +# - SimpleSnitch: +# Treats Strategy order as proximity. This can improve cache +# locality when disabling read repair. Only appropriate for +# single-datacenter deployments. +# - GossipingPropertyFileSnitch +# This should be your go-to snitch for production use. The rack +# and datacenter for the local node are defined in +# cassandra-rackdc.properties and propagated to other nodes via +# gossip. If cassandra-topology.properties exists, it is used as a +# fallback, allowing migration from the PropertyFileSnitch. +# - PropertyFileSnitch: +# Proximity is determined by rack and data center, which are +# explicitly configured in cassandra-topology.properties. +# - Ec2Snitch: +# Appropriate for EC2 deployments in a single Region. Loads Region +# and Availability Zone information from the EC2 API. The Region is +# treated as the datacenter, and the Availability Zone as the rack. +# Only private IPs are used, so this will not work across multiple +# Regions. +# - Ec2MultiRegionSnitch: +# Uses public IPs as broadcast_address to allow cross-region +# connectivity. (Thus, you should set seed addresses to the public +# IP as well.) You will need to open the storage_port or +# ssl_storage_port on the public IP firewall. (For intra-Region +# traffic, Cassandra will switch to the private IP after +# establishing a connection.) +# - RackInferringSnitch: +# Proximity is determined by rack and data center, which are +# assumed to correspond to the 3rd and 2nd octet of each node's IP +# address, respectively. Unless this happens to match your +# deployment conventions, this is best used as an example of +# writing a custom Snitch class and is provided in that spirit. +# +# You can use a custom Snitch by setting this to the full class name +# of the snitch, which will be assumed to be on your classpath. +endpoint_snitch: SimpleSnitch + +# controls how often to perform the more expensive part of host score +# calculation +dynamic_snitch_update_interval_in_ms: 100 +# controls how often to reset all host scores, allowing a bad host to +# possibly recover +dynamic_snitch_reset_interval_in_ms: 600000 +# if set greater than zero and read_repair_chance is < 1.0, this will allow +# 'pinning' of replicas to hosts in order to increase cache capacity. +# The badness threshold will control how much worse the pinned host has to be +# before the dynamic snitch will prefer other replicas over it. This is +# expressed as a double which represents a percentage. Thus, a value of +# 0.2 means Cassandra would continue to prefer the static snitch values +# until the pinned host was 20% worse than the fastest. +dynamic_snitch_badness_threshold: 0.1 + +# request_scheduler -- Set this to a class that implements +# RequestScheduler, which will schedule incoming client requests +# according to the specific policy. This is useful for multi-tenancy +# with a single Cassandra cluster. +# NOTE: This is specifically for requests from the client and does +# not affect inter node communication. +# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place +# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of +# client requests to a node with a separate queue for each +# request_scheduler_id. The scheduler is further customized by +# request_scheduler_options as described below. +request_scheduler: org.apache.cassandra.scheduler.NoScheduler + +# Scheduler Options vary based on the type of scheduler +# NoScheduler - Has no options +# RoundRobin +# - throttle_limit -- The throttle_limit is the number of in-flight +# requests per client. Requests beyond +# that limit are queued up until +# running requests can complete. +# The value of 80 here is twice the number of +# concurrent_reads + concurrent_writes. +# - default_weight -- default_weight is optional and allows for +# overriding the default which is 1. +# - weights -- Weights are optional and will default to 1 or the +# overridden default_weight. The weight translates into how +# many requests are handled during each turn of the +# RoundRobin, based on the scheduler id. +# +# request_scheduler_options: +# throttle_limit: 80 +# default_weight: 5 +# weights: +# Keyspace1: 1 +# Keyspace2: 5 + +# request_scheduler_id -- An identifier based on which to perform +# the request scheduling. Currently the only valid option is keyspace. +# request_scheduler_id: keyspace + +# Enable or disable inter-node encryption +# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that +# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher +# suite for authentication, key exchange and encryption of the actual data transfers. +# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode. +# NOTE: No custom encryption options are enabled at the moment +# The available internode options are : all, none, dc, rack +# +# If set to dc cassandra will encrypt the traffic between the DCs +# If set to rack cassandra will encrypt the traffic between the racks +# +# The passwords used in these options must match the passwords used when generating +# the keystore and truststore. For instructions on generating these files, see: +# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore +# +server_encryption_options: + internode_encryption: none + keystore: conf/.keystore + keystore_password: cassandra + truststore: conf/.truststore + truststore_password: cassandra + # More advanced defaults below: + # protocol: TLS + # algorithm: SunX509 + # store_type: JKS + # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA] + # require_client_auth: false + +# enable or disable client/server encryption. +client_encryption_options: + enabled: true + # If enabled and optional is set to true encrypted and unencrypted connections are handled. + optional: true + keystore: /etc/cassandra/keystore + keystore_password: cassandra + # require_client_auth: false + # Set trustore and truststore_password if require_client_auth is true + # truststore: conf/.truststore + # truststore_password: cassandra + # More advanced defaults below: + # protocol: TLS + # algorithm: SunX509 + # store_type: JKS + # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA] + +# internode_compression controls whether traffic between nodes is +# compressed. +# can be: all - all traffic is compressed +# dc - traffic between different datacenters is compressed +# none - nothing is compressed. +internode_compression: all + +# Enable or disable tcp_nodelay for inter-dc communication. +# Disabling it will result in larger (but fewer) network packets being sent, +# reducing overhead from the TCP protocol itself, at the cost of increasing +# latency if you block for cross-datacenter responses. +inter_dc_tcp_nodelay: false + +# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level +# Adjust the threshold based on your application throughput requirement +# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level +# gc_warn_threshold_in_ms: 1000 diff --git a/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/keystore b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/keystore new file mode 100644 index 0000000..c04c674 Binary files /dev/null and b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/keystore differ diff --git a/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.cer b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.cer new file mode 100644 index 0000000..0a3c9c6 Binary files /dev/null and b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.cer differ diff --git a/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.cer.pem b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.cer.pem new file mode 100644 index 0000000..c88035c --- /dev/null +++ b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.cer.pem @@ -0,0 +1,25 @@ +Bag Attributes + friendlyName: test + localKeyID: 54 69 6D 65 20 31 34 36 38 30 32 34 39 32 31 35 32 39 +subject=/C=None/L=None/O=None/OU=None/CN=test +issuer=/C=None/L=None/O=None/OU=None/CN=test +-----BEGIN CERTIFICATE----- +MIIDNzCCAh+gAwIBAgIEf319JjANBgkqhkiG9w0BAQsFADBLMQ0wCwYDVQQGEwRO +b25lMQ0wCwYDVQQHEwROb25lMQ0wCwYDVQQKEwROb25lMQ0wCwYDVQQLEwROb25l +MQ0wCwYDVQQDEwR0ZXN0MCAXDTE2MDcwOTAwMzg1M1oYDzIxMTYwNjE1MDAzODUz +WjBLMQ0wCwYDVQQGEwROb25lMQ0wCwYDVQQHEwROb25lMQ0wCwYDVQQKEwROb25l +MQ0wCwYDVQQLEwROb25lMQ0wCwYDVQQDEwR0ZXN0MIIBIjANBgkqhkiG9w0BAQEF +AAOCAQ8AMIIBCgKCAQEAuUNTV3cmlGigfag9xUix3GHR8FAgIfDad1eHDo4TJxBe +0hJC/xagqdyo1xXzw5c2UA6e1/7+MN+EV1mxkleIRBFv8n4o7RfKl5xck8oz88lk +z9Y6gm0atjHXLrnIz8jChZ2pcobg4szd9QdATb34OAH81NjY3Cnm1cbl4Vcl8wQh +m2mTdMwpq1lMZhq/Lu0UONKk6K+0IhhStxoFm3pzF8VCzwMWLGC427Flp3ElnU1A +S/oy8YqMFkD1vYHrCK7oisQN3KOHqTtylFJeURCpNRQtVOQPJnOp9jHYOjNVoRrx +xbH7KwAc7JlKnKGmG7pHoAEMZpnv0jCvh01SUGQ+BQIDAQABoyEwHzAdBgNVHQ4E +FgQURAWuX8QHoxhRcw05hr9Vu5Kh+AgwDQYJKoZIhvcNAQELBQADggEBAJAULPGP +Q1Vx3KL6FVk2zs7WkySQ2JALl13p32B/Yr/5iMfkKHloC5rFc3mtWmA66gRLJ6+5 +QIgaad8mrQEOMVEy4bDXhAQkPFBqRRGNHhkLT1phlJ2jfzZrp4InhH6JSD/0jXAB +wgrGs5VR6sBmrVyosPw8qeAFUIkv2m4VrwwyTNTgz6+dbHbThCrxrPoJd6v7fKIG +3ZrAlfd7CVMWvEVr59UGpByzSLwwOiLYQe06HGBGmGEqjW4w2/brSI2UObTvkKty +MLHlac5T+o4yMbPhqqw3+ErOZQ/MuiLSossjw2MRR/oR4kzkMZvcxevBwWLrouj1 +I4ouw52O8gQPHPg= +-----END CERTIFICATE----- diff --git a/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.key.pem b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.key.pem new file mode 100644 index 0000000..404b61b --- /dev/null +++ b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.key.pem @@ -0,0 +1,31 @@ +Bag Attributes + friendlyName: test + localKeyID: 54 69 6D 65 20 31 34 36 38 30 32 34 39 32 31 35 32 39 +Key Attributes: +-----BEGIN RSA PRIVATE KEY----- +MIIEowIBAAKCAQEAuUNTV3cmlGigfag9xUix3GHR8FAgIfDad1eHDo4TJxBe0hJC +/xagqdyo1xXzw5c2UA6e1/7+MN+EV1mxkleIRBFv8n4o7RfKl5xck8oz88lkz9Y6 +gm0atjHXLrnIz8jChZ2pcobg4szd9QdATb34OAH81NjY3Cnm1cbl4Vcl8wQhm2mT +dMwpq1lMZhq/Lu0UONKk6K+0IhhStxoFm3pzF8VCzwMWLGC427Flp3ElnU1AS/oy +8YqMFkD1vYHrCK7oisQN3KOHqTtylFJeURCpNRQtVOQPJnOp9jHYOjNVoRrxxbH7 +KwAc7JlKnKGmG7pHoAEMZpnv0jCvh01SUGQ+BQIDAQABAoIBAEKqXnAn+SMIb1Ao +XWoDmbUjIiemvZlZEVRGk9wB9hRliKlxVthyLQhS1hLn3Fryq+GtES3KnW+6zuWb +6hEuHGPaHn2VNmby270o0AuChKViQDul7FIIrscHMlanFgLnTFBGhrYmoQAcFnbY +0CPpi0ukM3XoPkkjbuRYeVpYQNisc7UkVFkeKwG08CzIBVImOaH55P1v/Pt/CKcF +wSqonvCJRcDUtPJ1wOKlimQrq0RO00iqm1gn+IIx2DELwVr1cCbrFN00u8e5xiR3 +PAEsMxCSixTEeRCcfceCePCuwRpGqUsPJXjwe18chUQhHaGLaur97IPO47/doq9W +qP9erYECgYEA6ynk9QVHHsURln0t9wY6SaN1GSp4DKENdpeFUbFDTH0q6orN21xF +GPJYTwLEWUpdUkPza8Qx7xHSH7AV3eggZtgWzsqn2XHbd3CxI0igDjWAwqJb+vdT +TveZfGTr8PjIL+U/7kcXIRmEY9q67jiyS6BIfOMofS3M2OimjTZd5aECgYEAya2O +5L2KtSp5O9AQcLqOCalKPBVaWqS5Of/Kza5L7qHlNeL7qqctCGOjkOuUvPQBv2yf +nsa/31SVoPMZPiym1QTp7gLB7jxZ+r7r2wN81jdjF8VDAi9kSJV92ynxR9Yfzq2b +AGUZZ9xU3hDvMunTeO2HenfNScvgl5KTnhkrteUCgYBARAS0CSs0d3qk+7SyC1um +gCsiI38HRIQfYq0mdCEGKDawPhqf1gl0FdaYURNDq5TxRGyjiMx0nxQjYMW5DRS9 +xlQFU1Cnlfv6GivujoxfFbQIfMJSRYDY1cV2P0ZTZkme/TGJdpgVjZmmiEIJlCj1 +jeoBZzrLatbOeFX7xV3HwQKBgGglQxwmMSHa3B4iFMtR2xVsIZSjZjRWyfwEdoL+ +VeHWIppQK6v1hpDFe2rT7MwiqWBjxI3mjqDSei5SOx/bSQ/J6M9rByByc/jDbOJ9 +i5LHqVlWGYNgW8YLxKFPqHRzQ5ukFN4AVz1GD2FZl1xQWU8iQgrhINbR/JnpLGfB +EcxtAoGBAKa/4+p/EpyTpTrdIsNpnATxglXr281Z8OqQW12SGi/cZHknKx6uj99g +IEb09CAJ5OEce947pOqmgoF4uuQ9rfFqghjMDkU+NYheofFpJtiKnzr7wefVwmLN +x53zt/MdzSsw5cYlHDGu2QrcvZqat/i+2Bs6fQ3XUjkh9nZyXmA6 +-----END RSA PRIVATE KEY----- diff --git a/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.p12 b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.p12 new file mode 100644 index 0000000..8ee5fd7 Binary files /dev/null and b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/test.p12 differ diff --git a/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/truststore b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/truststore new file mode 100644 index 0000000..90563cd Binary files /dev/null and b/src/test/resources/docker/cassandra-2.1/contents/etc/cassandra/truststore differ