Permalink
Browse files

Merge pull request #8 from njh/master

Updated repository URL in docs
  • Loading branch information...
connornishijima committed Jul 18, 2017
2 parents b863226 + f0b1c54 commit d36db1bb5a84b0a994903aa9024cf39abab92bc9
View
@@ -56,7 +56,7 @@ Here is what you need to get started with the bare minimum:
#include "Volume.h" // Include the Volume library
Volume vol; // Plug your speaker into the default pin for your board type:
// https://github.com/connornishijima/arduino-volume#supported-pins
// https://github.com/connornishijima/arduino-volume1#supported-pins
void setup() {
vol.begin();
@@ -4,7 +4,7 @@
#include "Volume.h" // Include the Volume library
Volume vol; // Plug your speaker into the default pin for your board type:
// https://github.com/connornishijima/arduino-volume#supported-pins
// https://github.com/connornishijima/arduino-volume1#supported-pins
// the setup routine runs once when you press reset:
void setup() {
@@ -9,7 +9,7 @@
at random intervals and go into deep sleep when not in use. Loudness
attenuation is done using my Volume library:
https://github.com/connornishijima/arduino-volume
https://github.com/connornishijima/arduino-volume1
I developed this library specifically for this project, so that I
could hide a "cricket" in my pal's vent with magnets. By driving the
@@ -50,7 +50,7 @@
#include <JeeLib.h> // Used for deep sleep
Volume vol; // Plug your speaker into the default pin for your board type:
// https://github.com/connornishijima/arduino-volume#supported-pins
// https://github.com/connornishijima/arduino-volume1#supported-pins
ISR(WDT_vect) { // Jeelib Sleepy uses this to wake back up
Sleepy::watchdogEvent();
@@ -4,7 +4,7 @@
#include "Volume.h" // Include the Volume library
Volume vol; // Plug your speaker into the default pin for your board type:
// https://github.com/connornishijima/arduino-volume#supported-pins
// https://github.com/connornishijima/arduino-volume1#supported-pins
void setup()
{
@@ -4,7 +4,7 @@
#include "Volume.h" // Include the Volume library
Volume vol; // Plug your speaker into the default pin for your board type:
// https://github.com/connornishijima/arduino-volume#supported-pins
// https://github.com/connornishijima/arduino-volume1#supported-pins
// Warble variables!
int f = 0;
View
@@ -10,7 +10,7 @@
"repository":
{
"type": "git",
"url": "https://github.com/connornishijima/arduino-volume.git"
"url": "https://github.com/connornishijima/arduino-volume1.git"
},
"version": "1.1.2",
"examples": "examples/*.ino",
View
@@ -5,5 +5,5 @@ maintainer=Connor Nishijima <connornishijima@gmail.com>
sentence=Gives tone functionality with 8 bit volume control with no extra parts
paragraph=Using ultrasonic PWM frequencies, you can now generate square wave tones at any frequency and 256 volume levels with no extra parts!
category=Signal Input/Output
url=https://github.com/connornishijima/arduino-volume
url=https://github.com/connornishijima/arduino-volume1
architectures=avr

0 comments on commit d36db1b

Please sign in to comment.