Skip to content

Tutorial: Logging

Simon Duquennoy edited this page Nov 5, 2018 · 7 revisions

Contiki-NG provides per-module, per-level logging, documented here: doc:logging.

First, we will customize the configuration of the hello-world example. As described in doc:configuration, create a file called project-conf.h in the project directory. In this file, define a number of log levels, such as:

#define LOG_CONF_LEVEL_IPV6                        LOG_LEVEL_DBG
#define LOG_CONF_LEVEL_RPL                         LOG_LEVEL_DBG
#define LOG_CONF_LEVEL_6LOWPAN                     LOG_LEVEL_DBG
#define LOG_CONF_LEVEL_TCPIP                       LOG_LEVEL_DBG
#define LOG_CONF_LEVEL_MAC                         LOG_LEVEL_DBG
#define LOG_CONF_LEVEL_FRAMER                      LOG_LEVEL_DBG

As you have added a new project-conf.h file, you need to clean:

$ make distclean

After compiling and logging in to the node (see tutorial:hello-world), you will get logs such as:

[INFO: RPL       ] sending a DIS to ff02::1a
[INFO: ICMPv6    ] Sending ICMPv6 packet to ::, type 155, code 0, len 2
[DBG : IPv6      ] Upper layer checksum len: 6 from: 40
[INFO: TCP/IP    ] output: sending to (NULL LL addr)
[INFO: 6LoWPAN   ] output: sending packet len 46
[INFO: 6LoWPAN   ] Compressing first header: 58
[INFO: 6LoWPAN   ] IPHC: last header could is not compressed: 58
[INFO: 6LoWPAN   ] output: header of len 4
[INFO: CSMA      ] sending to 0000.0000.0000.0000, seqno 27, queue length 1, free packets 7
[DBG : CSMA      ] scheduling transmission in 0 ticks, NB=0, BE=0
[INFO: CSMA      ] preparing packet for 0000.0000.0000.0000, seqno 27, tx 0, queue 1
[INFO: Frame 15.4] Out:  1 ffff.0000.0000.0000 14 10 (24)
[INFO: CSMA      ] tx to 0000.0000.0000.0000, seqno 27, status 0, tx 0, coll 0
[INFO: CSMA      ] packet sent to 0000.0000.0000.0000, seqno 27, status 0, tx 1, coll 0
[DBG : CSMA      ] free_queued_packet, queue length 0, free packets 8

This particular example shows the journey of an outgoing RPL DIS packet, down the stack. You can then edit your project-conf.h to set different log levels for each module (see os/sys/log-conf.h for a list of options).

You will see in tutorial:shell that it is also possible to change the log level on-the-fly using the shell.

Clone this wiki locally
You can’t perform that action at this time.