In file included from d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.h:96,
                 from d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:16:
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c: In function 'void dc_callback(spi_transaction_t*)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:203:22: error: 'GPIO' was not declared in this scope
  203 |         #define DC_D GPIO.out_w1ts = (1 << TFT_DC)//;GPIO.out_w1ts = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:783:28: note: in expansion of macro 'DC_D'
  783 |   if ((bool)spi_tx->user) {DC_D;}
      |                            ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
  202 |         #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.c:784:9: note: in expansion of macro 'DC_C'
  784 |   else {DC_C;}
      |         ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::begin_tft_write()':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:247:22: error: 'GPIO' was not declared in this scope
  247 |         #define CS_L GPIO.out_w1tc = (1 << TFT_CS); GPIO.out_w1tc = (1 << TFT_CS)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:80:5: note: in expansion of macro 'CS_L'
   80 |     CS_L;
      |     ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::begin_nin_write()':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:247:22: error: 'GPIO' was not declared in this scope
  247 |         #define CS_L GPIO.out_w1tc = (1 << TFT_CS); GPIO.out_w1tc = (1 << TFT_CS)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:92:5: note: in expansion of macro 'CS_L'
   92 |     CS_L;
      |     ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::end_tft_write()':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
  248 |         #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:106:7: note: in expansion of macro 'CS_H'
  106 |       CS_H;
      |       ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::end_nin_write()':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
  248 |         #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:121:7: note: in expansion of macro 'CS_H'
  121 |       CS_H;
      |       ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::begin_tft_read()':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:247:22: error: 'GPIO' was not declared in this scope
  247 |         #define CS_L GPIO.out_w1tc = (1 << TFT_CS); GPIO.out_w1tc = (1 << TFT_CS)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:141:5: note: in expansion of macro 'CS_L'
  141 |     CS_L;
      |     ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::end_tft_read()':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
  248 |         #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:161:7: note: in expansion of macro 'CS_H'
  161 |       CS_H;
      |       ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::writecommand(uint8_t)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
  202 |         #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:964:3: note: in expansion of macro 'DC_C'
  964 |   DC_C;
      |   ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::writedata(uint8_t)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:203:22: error: 'GPIO' was not declared in this scope
  203 |         #define DC_D GPIO.out_w1ts = (1 << TFT_DC)//;GPIO.out_w1ts = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:1012:3: note: in expansion of macro 'DC_D'
 1012 |   DC_D;        // Play safe, but should already be in data mode
      |   ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'uint8_t TFT_eSPI::readcommand8(uint8_t, uint8_t)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
  202 |         #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:1049:3: note: in expansion of macro 'DC_C'
 1049 |   DC_C; tft_Write_8(0xD9);
      |   ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual uint16_t TFT_eSPI::readPixel(int32_t, int32_t)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
  248 |         #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:1205:3: note: in expansion of macro 'CS_H'
 1205 |   CS_H;
      |   ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::readRectRGB(int32_t, int32_t, int32_t, int32_t, uint8_t*)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:248:22: error: 'GPIO' was not declared in this scope
  248 |         #define CS_H GPIO.out_w1ts = (1 << TFT_CS)//;GPIO.out_w1ts = (1 << TFT_CS)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:2209:3: note: in expansion of macro 'CS_H'
 2209 |   CS_H;
      |   ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::setWindow(int32_t, int32_t, int32_t, int32_t)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
  202 |         #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3419:5: note: in expansion of macro 'DC_C'
 3419 |     DC_C; tft_Write_8(TFT_CASET);
      |     ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'void TFT_eSPI::readAddrWindow(int32_t, int32_t, int32_t, int32_t)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
  202 |         #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3495:3: note: in expansion of macro 'DC_C'
 3495 |   DC_C; tft_Write_8(TFT_CASET);
      |   ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp: In member function 'virtual void TFT_eSPI::drawPixel(int32_t, int32_t, uint32_t)':
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
  202 |         #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3677:7: note: in expansion of macro 'DC_C'
 3677 |       DC_C; tft_Write_8(TFT_CASET);
      |       ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
  202 |         #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3684:7: note: in expansion of macro 'DC_C'
 3684 |       DC_C; tft_Write_8(TFT_PASET);
      |       ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\Processors/TFT_eSPI_ESP32_S3.h:202:22: error: 'GPIO' was not declared in this scope
  202 |         #define DC_C GPIO.out_w1tc = (1 << TFT_DC)//;GPIO.out_w1tc = (1 << TFT_DC)
      |                      ^~~~
d:\userdaten_benny\Dokumente\Arduino\libraries\TFT_eSPI\TFT_eSPI.cpp:3690:3: note: in expansion of macro 'DC_C'
 3690 |   DC_C; tft_Write_8(TFT_RAMWR);
      |   ^~~~

exit status 1

Compilation error: exit status 1