Skip to content


Subversion checkout URL

You can clone with
Download ZIP
Branch: master
Fetching contributors…

Cannot retrieve contributors at this time

243 lines (184 sloc) 10.9 KB

mcsoda - sugary streaming load-generator for key-value stores

Is mcsoda good for you? Or, rather, does it work well as a load-generator? Even though mcsoda's implemented in python, I've seen mcsoda perform better than some other C-based load generators in several cases (but your own mileage may vary).

What is mcsoda's secret ingredient?

mcsoda performs well because it (cheats) operates differently by avoiding the classic single-request / single-response approach. Instead, mcsoda uses a "streaming" or batched approach similar to spymemcached's design.

Instead of invoking multiple, individual send() & recv() calls for each request, mcsoda batches up a (configurable) number of requests into one buffer and invokes a single, large send() system call. And, mcsoda invokes read()'s in buffered fashion. This results in fewer system calls, and the networking stack is better utilized. On the server-side, key-value servers like memcached can be more fully utilized with real request processing work rather than waiting for the request-response tennis ball to be batted back and forth across the net.

The ugly/bad

One place where mcsoda does NOT work well is in leveraging multiple client-side threads. Even though mcsoda can run with multiple threads, python's threading is sub-optimal, so multi-threaded mcsoda is not recommened.

The good

There's an advantage to single-threadedness, however, and that is that reaching repeatability is much easier to accomplish. mcsoda supports repeatability by implementing a functional algorithm to workload generation. If you have multiple runs of mcsoda and invoke those mcsoda's using the same exact command-line parameters, then each of those separate runs of mcsoda will generate the same exact sequence of requests. If you change (or improve) the server, you can repeat your performance experiments more scientifically by reusing the same exact mcsoda parameters from previous runs.

Additionally, mcsoda tries (optionally) to use a constant amount of memory, even as it's tracking histograms & statistics. Other load-generators may have bugs (or features) that add a little bit of memory usage on each request, leaving those other load-generators vulnerable in long running tests to out-of-memory conditions.

Usage instructions

usage: ./ [memcached[-binary|-ascii]://][user[:pswd]@]host[:port] [key=val]*

  default protocol = memcached-binary://
  default port     = 11211

examples: ./ memcached-binary:// max-items=1000000 json=1
          ./ memcached://
          ./ my-test-bucket@
          ./ my-test-bucket:MyPassword@

optional key=val's and their defaults:
  backoff-factor     = 2.0   Exponential backoff factor on ETMPFAIL errors.
  batch              = 100   Batch/pipeline up this # of commands per server.
  doc-cache          = 1     When 1, cache docs; faster, but uses O(N) memory.
  doc-gen            = 1     When 1 and doc-cache, pre-generate docs at start.
  exit-after-creates = 0     Exit after max-creates is reached.
  expiration         = 0     Expiration time parameter for SET's
  histo-precision    = 1     Precision of histogram bins.
  hot-shift          = 0     # of keys/sec that hot item subset should shift.
  json               = 1     Use JSON documents. 0 to generate binary documents.
  max-creates        = -1    Max # of creates; defaults to max-items.
  max-items          = -1    Max # of items; default 100000.
  max-ops            = 0     Max # of ops before exiting. 0 means keep going.
  max-ops-per-sec    = 0     When >0, max ops/second target performance.
  min-value-size     = 10    Min value size (bytes) for SET's; comma-separated.
  prefix             =       Prefix for every item key.
  ratio-arpas        = 0.0   Fraction of SET non-DELETE'S to be 'a-r-p-a' cmds.
  ratio-creates      = 0.1   Fraction of SET's that should create new items.
  ratio-deletes      = 0.0   Fraction of SET updates that shold be DELETE's.
  ratio-expirations  = 0.0   Fraction of SET's that use the provided expiration.
  ratio-hot          = 0.2   Fraction of items to have as a hot item subset.
  ratio-hot-gets     = 0.95  Fraction of GET's that hit the hot item subset.
  ratio-hot-sets     = 0.95  Fraction of SET's that hit the hot item subset.
  ratio-misses       = 0.05  Fraction of GET's that should miss.
  ratio-sets         = 0.1   Fraction of requests that should be SET's.
  report             = 40000 Emit performance output after this many requests.
  threads            = 1     Number of client worker threads to use.
  time               = 0     Stop after this many seconds if > 0.
  vbuckets           = 0     When >0, vbucket hash in memcached-binary protocol.
  cur-arpas          = 0     # of add/replace/prepend/append's (a-r-p-a) cmds.
  cur-base           = 0     Base of numeric key range. 0 by default.
  cur-creates        = 0     Number of sets that were creates.
  cur-deletes        = 0     Number of deletes already done.
  cur-gets           = 0     Number of gets already done.
  cur-items          = 0     Number of items known to already exist.
  cur-sets           = 0     Number of sets already done.

  TIP: min-value-size can be comma-separated values: min-value-size=10,256,1024


Q: How do I use mcsoda to load a million documents, and then exit?

./ URL max-items=1000000 ratio-sets=1 ratio-creates=1 exit-after-creates=1 doc-gen=0 doc-create=0

That can be read like "of the requests that mcsoda will perform, 100% of them should be SET's (related, 0% will be GET's). That is because the ratio-sets=1.00

Of those SET's, 100% will be SET's that create new items (related, 0% will be mutations on existing items). That is because the ratio-creates=1.00

Q: Will the cluster-aware version be vbucket-aware or still require moxi (the memcached/couchbase proxy)?

A: No moxi required -- mcsoda can optionally behave as a so-called "smart client" and respond to Couchbase's dynamic cluster server-map/REST topology changes. In other words, you can use Rebalance to add/remove server nodes while using mcsoda.

Q: What about the non-cluster aware? I wish to do a bit of testing on single-node and see if that makes a difference... so I need port 11210 "direct access" compatibility?

A: Yes, you can do that too with mcsoda.

The "protocol" part of the URL-looking parameter control mcsoda's behavior. To target a single-node's memcached on its direct port, 11210, use "memcached-binary://HOST:11210". However, when you target port 11210, you'll also need to tell mcsoda how many vbuckets there are (otherwise, it only targets vbucket 0).


./ memcached-binary://HOST:11210 vbuckets=1024

Or, if you're testing Couchbase 2.0...

./ memcached-binary://HOST:11210 vbuckets=256

To target moxi, use port 11211...

./ memcached-binary://HOST:11211

For completeness, to target an entire Couchbase / Membase cluster, use "membase-binary://HOST:8091". mcsoda only targets the default bucket. Example...

./ membase-binary://HOST:8091

Q: What is doc-gen and doc-cache and do I need those?

The doc-gen and doc-cache parameters let you control some time/space tradeoffs in mcsoda. It takes time to generate documents. Instead, if you want to generate them up-front, use doc-gen=1. This will give you better runtime performance. However, holding onto all these pre-generated docs won't be good if you're trying to load a huge number of documents, since mcsoda will spend a lot of time generating docs before sending its first requests. So, to turn off document pre-generation, used doc-gen=0.

Even if doc-gen=0, you might want mcsoda to cache any documents that it ends up creating during runtimes. To do that, specify doc-cache=1. Over long runs, however, mcsoda will end up using more and more memory to hold onto those cached, generated documents.

In short, when trying to do long, multi-hour or multi-day runs, used doc-cache=0. If you're also trying to test with a lot of documents, also use doc-gen=0.

Q: If mcsoda uses request batching, how does it get latency timings?

At the start of each batch, mcsoda performns do a single, classic request-reply to the server in order to measure latency. So, if your batch=100 (the default), then every hundred'th request will be a latency measurement request.

Q: How do I see what data mcsoda is loading?

Use the 'none://' protocol, which is a NO-OP protocol and make mcsoda just print out the commands it would have sent to a server.

Q: What's the significance of the number of items (max-items). Any reason not use the default?

No reason not to use default. Just be consistent (you probably are) for perf tests, and if not already, probably have to reset your server cluster every time.

Q: If the number of operations (max-ops) is greater than the number of items (max-items), after max-items is reached, the existing items are just reused for operations, right?

That's right -- it rolls around. By that, I mean that mcsoda keeps track of the # of items it knows it has created itself (in a cur-items counter), and it can do operations against those known items.

Q: I'd like to pre-load data before running (and re-running) the actual test. So, I want to use two (or more) invocations of mcsoda.

The trick is the 2nd invocation of mcsoda needs to be told the number of items that are already there, via the cur-items parameter. So...

1) loading phase - mcsoda ... max-items=1000000 ratio-sets=1 ratio-creates=1 exit-after-creates=1 doc-gen=0 doc-cache=0

2) accessing phase - mcsoda ... max-items=1000000 cur-items=1000000 ...

Q: I've been asked to measure performance for up to 16kb documents. I found that when I went above 9kb the behavior of mcsoda changed a lot (i.e., if max-ops was something small like 10k, it would return almost immediately, until i crossed the 9k document size, then it would appear to hang forever, maybe not, but I would give up waiting). I found that if reduced the batch size to 50, I could safely go up to the 16kb doc size, so I'm assuming the size of the batch was exceeding some threshold. I can use batch=50 for these tests but I was wondering what might be going on here?

It's likely some bug in mcsoda. mcsoda's doing a single send() call per batch. So, 16K * 100 byte sized buffer for each single send() call. There's no error handling if there's a problem with mcsoda's send() call, and perhaps it's too large / would-block, etc.

You found the right workaround, though, to bring down the batch size.

More info

An older presentation (pdf) is available at:

Jump to Line
Something went wrong with that request. Please try again.