Skip to content
master
Go to file
Code

Latest commit

 

Git stats

Files

Permalink
Failed to load latest commit information.
Type
Name
Latest commit message
Commit time
 
 
 
 
 
 
 
 

README.md

LPC812breakout

Breakout Board for the NXP LPC812M101JPH20 microcontroller. Includes push buttons for reset and activating the serial bootloader. The board has an integrated 500mA 3.3V LDO to supply both the MCU and connected devices from the USB port.

The four pins on the top side (5V,RX,TX,GND) can be used to connect a cheap USB to serial adapter (<$2 on ebay) and program the device via the internal bootloader using FlashMagic. Note that you have to cross RX and TX. RX from the serial port goes to TX and vice versa for TX.

  • FlashMagic can be downloaded here.
  • Developer environemt and LPC800 datasheets by NXP can be found here.

The entire board with LPC812 is smaller than a DIP LPC1114. See below for size comparison.

Bonus: Eagle Library for all LPC800 parts

You can order PCB's here: Shared design at OSH Park The price is $3.30 including shipping for three boards.

Status

  • 2013/09/17 Untested. Board ordered at OSH park
  • 2013/09/29 Designed revision 2
  • 2013/10/?? Version 2 board received, built and tested. Everything works as intended.

Top side

Front

Bottom

Front

Size comparison of first version to LPC1114

Front

On breadboard

Front

About

Breakout Board for the LPC812 MCU

Resources

Releases

No releases published

Packages

No packages published
You can’t perform that action at this time.