Skip to content
This repository
Browse code

doc update

  • Loading branch information...
commit c32aa6f6b0255a111306f1e112b1f4b04db8ef35 1 parent 5c24628
Christiane Ruetten authored February 04, 2011

Showing 1 changed file with 22 additions and 19 deletions. Show diff stats Hide diff stats

  1. 41  README
41  README
@@ -6,34 +6,37 @@
6 6
 # Released under GPLv2, see http://www.gnu.org/licenses/gpl-2.0.html
7 7
 
8 8
 FEATURES:
9  
-  - Install this IPKG on your fresh OpenWRT "Backfire", and out comes
10  
-    (hopefully) a ready-to-use PirateBox.
  9
+  - Install this IPKG on your fresh OpenWRT "Backfire", and out
  10
+    comes (hopefully) a ready-to-use PirateBox, a project by NYU
  11
+    Professor David Darts.
11 12
   - Now supports devices with 4 MByte flash
12 13
   - Tested on
13 14
     - Asus WL-500gP (brcm47xx)
14 15
     - Asus WL-500g (brcm47xx)
15 16
     - Buffalo WZR-HP-G300NH (ar71xx)
  17
+    - Linksys WRT160NL
16 18
 
17 19
 TODO:
18 20
   - Test other platforms
19 21
   - Improve error checking
20 22
 
21 23
 PLEASE HELP:
22  
-  - I expect mkPirateBox v0.2+ to run on many or even most untested router
23  
-    models. If something goes wrong, installation will most likely fail
24  
-    during wireless setup. I usually can make it easily work if you help me
25  
-    out. If you decide to try mkPirateBox on an untested router model,
26  
-    please send send me feedback on how it went, including
  24
+  - I expect mkPirateBox v0.2+ to run on many or even most untested
  25
+    router models. If something goes wrong, I usually can easily make
  26
+    it work if you help me out. If you decide to try mkPirateBox on
  27
+    an untested router model, please send send me feedback on how it
  28
+    went, including
27 29
     - your router model
28 30
     - output of the command
29 31
       "cat /etc/openwrt_release /etc/config/wireless /etc/config/network".
30 32
   - Thanks! :)
31 33
 
32 34
 REQUIREMENTS:
33  
-  - Decently powerful router with USB2.0 port which is supported by OpenWRT.
34  
-    Minimum requirements are 125 MHz, 16 MByte RAM and 4 GByte flash, but I
35  
-    recommend 250 MHz, 32 MByte RAM and 8 MByte flash. The following models
36  
-    meet or exceed the recommendation and should work out of the box:
  35
+  - Decently powerful router with USB2.0 port which is supported by
  36
+    OpenWRT. Minimum requirements are 125 MHz, 16 MByte RAM and 4 GByte
  37
+    flash, but I recommend 250 MHz (the more, the better), 32 MByte RAM,
  38
+    and 8 MByte flash. Following models meet or exceed the recommendation
  39
+    and should work out of the box:
37 40
     - TD-Link TL-WR1043ND (ar71xx, cheap!)
38 41
     - D-Link DIR-825 (ar71xx, white, fast!)
39 42
     - Linksys WRT160NL (ar71xx)
@@ -96,12 +99,12 @@ USAGE:
96 99
       it detects an un-PirateBox-ified USB disk.
97 100
 
98 101
 REFERENCES:
99  
- - The PirateBox project:
100  
-   http://wiki.daviddarts.com/PirateBox_DIY
101  
- - OpenWRT - List of supported devices:
102  
-   http://wiki.openwrt.org/toh/start
103  
- - OpenWRT documentation (look for tftp installation):
104  
-   http://wiki.openwrt.org/doc/start
105  
- - OpenWRT "Backfire" 10.04.1-r4 images:
106  
-   http://downloads.openwrt.org/backfire/10.03.1-rc4/
  102
+  - The PirateBox project:
  103
+    http://wiki.daviddarts.com/PirateBox_DIY
  104
+  - OpenWRT - List of supported devices:
  105
+    http://wiki.openwrt.org/toh/start
  106
+  - OpenWRT documentation (look for tftp installation):
  107
+    http://wiki.openwrt.org/doc/start
  108
+  - OpenWRT "Backfire" 10.04.1-r4 images:
  109
+    http://downloads.openwrt.org/backfire/10.03.1-rc4/
107 110
 

0 notes on commit c32aa6f

Please sign in to comment.
Something went wrong with that request. Please try again.