Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "Here's the first batch of fixes for this release cycle.

  Main diffstat here is the re-deletion of netx. I messed up and most
  likely didn't remove the files from the index when I test-merged this
  and saw conflicts, and from there on out 'git rerere' remembered the
  mistake and I missed checking it. Here it's done again as expected.

  Besides that:

   - A defconfig refresh + enabling of new drivers for u8500

   - i.MX fixlets for i2c/SAI/pinmux

   - sleep.S build fix for Davinci

   - Broadcom devicetree build/warning fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: defconfig: u8500: Add new drivers
  ARM: defconfig: u8500: Refresh defconfig
  ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux
  ARM: davinci: fix sleep.S build error on ARMv4
  arm64: dts: imx8mq: fix SAI compatible
  arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
  ARM: dts: imx6ul: fix clock frequency property name of I2C buses
  ARM: Delete netx a second time
  ARM: dts: imx7ulp: Fix usb-phy unit address format

Author: torvalds

arch/arm/Kconfig.debug

@@ -1535,7 +1535,6 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX7D_UART
 	default "debug/ks8695.S" if DEBUG_KS8695_UART
 	default "debug/msm.S" if DEBUG_QCOM_UARTDM
-	default "debug/netx.S" if DEBUG_NETX_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
@@ -1575,7 +1574,6 @@ config DEBUG_UART_8250
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x00100a00 if DEBUG_NETX_UART
 	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
@@ -1700,7 +1698,6 @@ config DEBUG_UART_PHYS
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
@@ -1717,7 +1714,6 @@ config DEBUG_UART_VIRT
 	default 0xc881f000 if DEBUG_RV1108_UART2
 	default 0xc8821000 if DEBUG_RV1108_UART1
 	default 0xc8912000 if DEBUG_RV1108_UART0
-	default 0xe0000a00 if DEBUG_NETX_UART
 	default 0xe0010fe0 if ARCH_RPC
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf0010000 if DEBUG_ASM9260_UART
@@ -1822,7 +1818,6 @@ config DEBUG_UART_VIRT
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \

arch/arm/boot/dts/bcm47094-linksys-panamera.dts

@@ -124,6 +124,9 @@
 	};
 
 	mdio-bus-mux {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		/* BIT(9) = 1 => external mdio */
 		mdio_ext: mdio@200 {
 			reg = <0x200>;

arch/arm/boot/dts/imx6ul-14x14-evk.dtsi

@@ -112,7 +112,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

arch/arm/boot/dts/imx6ul-geam.dts

@@ -156,7 +156,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

arch/arm/boot/dts/imx6ul-isiot.dtsi

@@ -148,7 +148,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

arch/arm/boot/dts/imx6ul-pico-hobbit.dts

@@ -43,7 +43,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

arch/arm/boot/dts/imx6ul-pico-pi.dts

@@ -43,7 +43,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
@@ -58,7 +58,7 @@
 };
 
 &i2c3 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";

arch/arm/boot/dts/imx7ulp.dtsi

@@ -186,7 +186,7 @@
 			reg = <0x40330200 0x200>;
 		};
 
-		usbphy1: usb-phy@0x40350000 {
+		usbphy1: usb-phy@40350000 {
 			compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
 			reg = <0x40350000 0x1000>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/configs/u8500_defconfig

@@ -4,17 +4,9 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_U8500=y
-CONFIG_MACH_HREFV60=y
-CONFIG_MACH_SNOWBALL=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
@@ -25,6 +17,11 @@ CONFIG_CPU_IDLE=y
 CONFIG_ARM_U8500_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -47,7 +44,6 @@ CONFIG_SMSC911X=y
 CONFIG_SMSC_PHY=y
 CONFIG_CW1200=y
 CONFIG_CW1200_WLAN_SDIO=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
@@ -63,7 +59,6 @@ CONFIG_RMI4_CORE=y
 CONFIG_RMI4_I2C=y
 CONFIG_RMI4_F11=y
 # CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
@@ -72,13 +67,21 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_REGULATOR_AB8500=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_DRM=y
+CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
+CONFIG_DRM_LIMA=y
+CONFIG_DRM_MCDE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -87,6 +90,7 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_UX500=y
+CONFIG_MUSB_PIO_ONLY=y
 CONFIG_AB8500_USB=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
@@ -103,6 +107,7 @@ CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
+CONFIG_HWSPINLOCK=y
 CONFIG_HSEM_U8500=y
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
@@ -126,20 +131,19 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_CRYPTO_DEV_UX500=y
+CONFIG_CRYPTO_DEV_UX500_CRYP=y
+CONFIG_CRYPTO_DEV_UX500_HASH=y
+CONFIG_CRYPTO_DEV_UX500_DEBUG=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_CORESIGHT=y
 CONFIG_CORESIGHT_SINK_TPIU=y
 CONFIG_CORESIGHT_SINK_ETBV10=y
 CONFIG_CORESIGHT_SOURCE_ETM3X=y
-CONFIG_CRYPTO_DEV_UX500=y
-CONFIG_CRYPTO_DEV_UX500_CRYP=y
-CONFIG_CRYPTO_DEV_UX500_HASH=y
-CONFIG_CRYPTO_DEV_UX500_DEBUG=y

arch/arm/mach-davinci/sleep.S

@@ -24,6 +24,7 @@
 #define DEEPSLEEP_SLEEPENABLE_BIT	BIT(31)
 
 	.text
+	.arch	armv5te
 /*
  * Move DaVinci into deep sleep state
  *