brcm80211: fmac: add USB support for bcm43235/6/8 chipsets

This patch extends the use of the brcmfmac driver with support for
chipsets with a USB host interface. The first chipsets supported are
the bcm43235, bcm43236, and bcm43238 for which firmware has been
submitted.

This driver change has been successfully built for x86, x86_64,
ppc64, arm_le, and mips_be.

It has been tested successfully on x86 and x86_64.

Cc: M. Lambert <lambertm@westman.wave.ca>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Kan Yan <kanyan@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Author: Arend van Spriel

drivers/net/wireless/brcm80211/Kconfig

@@ -26,16 +26,25 @@ config BRCMFMAC
 	  it'll be called brcmfmac.ko.
 
 config BRCMFMAC_SDIO
-	bool "SDIO bus interface support for FullMAC"
+	bool "SDIO bus interface support for FullMAC driver"
 	depends on MMC
 	depends on BRCMFMAC
 	select FW_LOADER
 	default y
 	---help---
 	  This option enables the SDIO bus interface support for Broadcom
-	  FullMAC WLAN driver.
-	  Say Y if you want to use brcmfmac for a compatible SDIO interface
-	  wireless card.
+	  IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
+	  use the driver for a SDIO wireless card.
+
+config BRCMFMAC_USB
+	bool "USB bus interface support for FullMAC driver"
+	depends on USB
+	depends on BRCMFMAC
+	select FW_LOADER
+	---help---
+	  This option enables the USB bus interface support for Broadcom
+	  IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
+	  use the driver for an USB wireless card.
 
 config BRCMDBG
 	bool "Broadcom driver debug functions"

drivers/net/wireless/brcm80211/brcmfmac/Makefile

@@ -19,6 +19,8 @@ ccflags-y += \
 	-Idrivers/net/wireless/brcm80211/brcmfmac	\
 	-Idrivers/net/wireless/brcm80211/include
 
+ccflags-y += -D__CHECK_ENDIAN__
+
 obj-$(CONFIG_BRCMFMAC) += brcmfmac.o
 brcmfmac-objs += \
 		wl_cfg80211.o \
@@ -30,5 +32,5 @@ brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
 		bcmsdh.o \
 		bcmsdh_sdmmc.o \
 		sdio_chip.o
-
-ccflags-y += -D__CHECK_ENDIAN__
+brcmfmac-$(CONFIG_BRCMFMAC_USB) += \
+		usb.o

drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h

@@ -40,8 +40,8 @@ struct dngl_stats {
 struct brcmf_bus {
 	u8 type;		/* bus type */
 	union {
-		/* pointer to sdio private structure */
 		struct brcmf_sdio_dev *sdio;
+		struct brcmf_usbdev *usb;
 	} bus_priv;
 	struct brcmf_pub *drvr;	/* pointer to driver pub structure brcmf_pub */
 	enum brcmf_bus_state state;
@@ -110,5 +110,9 @@ extern int brcmf_add_if(struct device *dev, int ifidx,
 extern void brcmf_sdio_exit(void);
 extern int brcmf_sdio_init(void);
 #endif
+#ifdef CONFIG_BRCMFMAC_USB
+extern void brcmf_usb_exit(void);
+extern int brcmf_usb_init(void);
+#endif
 
 #endif				/* _BRCMF_BUS_H_ */

drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c

@@ -1190,6 +1190,11 @@ static int __init brcmfmac_init(void)
 	if (ret)
 		goto fail;
 #endif
+#ifdef CONFIG_BRCMFMAC_USB
+	ret = brcmf_usb_init();
+	if (ret)
+		goto fail;
+#endif
 
 fail:
 	return ret;
@@ -1200,6 +1205,9 @@ static void __exit brcmfmac_exit(void)
 #ifdef CONFIG_BRCMFMAC_SDIO
 	brcmf_sdio_exit();
 #endif
+#ifdef CONFIG_BRCMFMAC_USB
+	brcmf_usb_exit();
+#endif
 }
 
 module_init(brcmfmac_init);