x86/xen: Drop USERGS_SYSRET64 paravirt call

USERGS_SYSRET64 is used to return from a syscall via SYSRET, but
a Xen PV guest will nevertheless use the IRET hypercall, as there
is no sysret PV hypercall defined.

So instead of testing all the prerequisites for doing a sysret and
then mangling the stack for Xen PV again for doing an iret just use
the iret exit from the beginning.

This can easily be done via an ALTERNATIVE like it is done for the
sysenter compat case already.

It should be noted that this drops the optimization in Xen for not
restoring a few registers when returning to user mode, but it seems
as if the saved instructions in the kernel more than compensate for
this drop (a kernel build in a Xen PV guest was slightly faster with
this patch applied).

While at it remove the stale sysret32 remnants.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210120135555.32594-6-jgross@suse.com

Author: jgross1

arch/x86/entry/entry_64.S

@@ -46,14 +46,6 @@
 .code64
 .section .entry.text, "ax"
 
-#ifdef CONFIG_PARAVIRT_XXL
-SYM_CODE_START(native_usergs_sysret64)
-	UNWIND_HINT_EMPTY
-	swapgs
-	sysretq
-SYM_CODE_END(native_usergs_sysret64)
-#endif /* CONFIG_PARAVIRT_XXL */
-
 /*
  * 64-bit SYSCALL instruction entry. Up to 6 arguments in registers.
  *
@@ -123,7 +115,12 @@ SYM_INNER_LABEL(entry_SYSCALL_64_after_hwframe, SYM_L_GLOBAL)
 	 * Try to use SYSRET instead of IRET if we're returning to
 	 * a completely clean 64-bit userspace context.  If we're not,
 	 * go to the slow exit path.
+	 * In the Xen PV case we must use iret anyway.
 	 */
+
+	ALTERNATIVE "", "jmp	swapgs_restore_regs_and_return_to_usermode", \
+		X86_FEATURE_XENPV
+
 	movq	RCX(%rsp), %rcx
 	movq	RIP(%rsp), %r11
 
@@ -215,7 +212,8 @@ syscall_return_via_sysret:
 
 	popq	%rdi
 	popq	%rsp
-	USERGS_SYSRET64
+	swapgs
+	sysretq
 SYM_CODE_END(entry_SYSCALL_64)
 
 /*

arch/x86/include/asm/irqflags.h

@@ -132,12 +132,6 @@ static __always_inline unsigned long arch_local_irq_save(void)
 #endif
 
 #define INTERRUPT_RETURN	jmp native_iret
-#define USERGS_SYSRET64				\
-	swapgs;					\
-	sysretq;
-#define USERGS_SYSRET32				\
-	swapgs;					\
-	sysretl
 
 #else
 #define INTERRUPT_RETURN		iret

arch/x86/include/asm/paravirt.h

@@ -776,11 +776,6 @@ extern void default_banner(void);
 
 #ifdef CONFIG_X86_64
 #ifdef CONFIG_PARAVIRT_XXL
-#define USERGS_SYSRET64							\
-	PARA_SITE(PARA_PATCH(PV_CPU_usergs_sysret64),			\
-		  ANNOTATE_RETPOLINE_SAFE;				\
-		  jmp PARA_INDIRECT(pv_ops+PV_CPU_usergs_sysret64);)
-
 #ifdef CONFIG_DEBUG_ENTRY
 #define SAVE_FLAGS(clobbers)                                        \
 	PARA_SITE(PARA_PATCH(PV_IRQ_save_fl),			    \

arch/x86/include/asm/paravirt_types.h

@@ -156,14 +156,6 @@ struct pv_cpu_ops {
 
 	u64 (*read_pmc)(int counter);
 
-	/*
-	 * Switch to usermode gs and return to 64-bit usermode using
-	 * sysret.  Only used in 64-bit kernels to return to 64-bit
-	 * processes.  Usermode register state, including %rsp, must
-	 * already be restored.
-	 */
-	void (*usergs_sysret64)(void);
-
 	/* Normal iret.  Jump to this with the standard iret stack
 	   frame set up. */
 	void (*iret)(void);

arch/x86/kernel/asm-offsets_64.c

@@ -13,8 +13,6 @@ int main(void)
 {
 #ifdef CONFIG_PARAVIRT
 #ifdef CONFIG_PARAVIRT_XXL
-	OFFSET(PV_CPU_usergs_sysret64, paravirt_patch_template,
-	       cpu.usergs_sysret64);
 #ifdef CONFIG_DEBUG_ENTRY
 	OFFSET(PV_IRQ_save_fl, paravirt_patch_template, irq.save_fl);
 #endif

arch/x86/kernel/paravirt.c

@@ -135,8 +135,7 @@ unsigned paravirt_patch_default(u8 type, void *insn_buff,
 	else if (opfunc == _paravirt_ident_64)
 		ret = paravirt_patch_ident_64(insn_buff, len);
 
-	else if (type == PARAVIRT_PATCH(cpu.iret) ||
-		 type == PARAVIRT_PATCH(cpu.usergs_sysret64))
+	else if (type == PARAVIRT_PATCH(cpu.iret))
 		/* If operation requires a jmp, then jmp */
 		ret = paravirt_patch_jmp(insn_buff, opfunc, addr, len);
 #endif
@@ -170,7 +169,6 @@ static u64 native_steal_clock(int cpu)
 
 /* These are in entry.S */
 extern void native_iret(void);
-extern void native_usergs_sysret64(void);
 
 static struct resource reserve_ioports = {
 	.start = 0,
@@ -310,7 +308,6 @@ struct paravirt_patch_template pv_ops = {
 
 	.cpu.load_sp0		= native_load_sp0,
 
-	.cpu.usergs_sysret64	= native_usergs_sysret64,
 	.cpu.iret		= native_iret,
 
 #ifdef CONFIG_X86_IOPL_IOPERM

arch/x86/kernel/paravirt_patch.c

@@ -27,7 +27,6 @@ struct patch_xxl {
 	const unsigned char	mmu_write_cr3[3];
 	const unsigned char	irq_restore_fl[2];
 	const unsigned char	cpu_wbinvd[2];
-	const unsigned char	cpu_usergs_sysret64[6];
 	const unsigned char	mov64[3];
 };
 
@@ -40,8 +39,6 @@ static const struct patch_xxl patch_data_xxl = {
 	.mmu_write_cr3		= { 0x0f, 0x22, 0xdf },	// mov %rdi, %cr3
 	.irq_restore_fl		= { 0x57, 0x9d },	// push %rdi; popfq
 	.cpu_wbinvd		= { 0x0f, 0x09 },	// wbinvd
-	.cpu_usergs_sysret64	= { 0x0f, 0x01, 0xf8,
-				    0x48, 0x0f, 0x07 },	// swapgs; sysretq
 	.mov64			= { 0x48, 0x89, 0xf8 },	// mov %rdi, %rax
 };
 
@@ -83,7 +80,6 @@ unsigned int native_patch(u8 type, void *insn_buff, unsigned long addr,
 	PATCH_CASE(mmu, read_cr3, xxl, insn_buff, len);
 	PATCH_CASE(mmu, write_cr3, xxl, insn_buff, len);
 
-	PATCH_CASE(cpu, usergs_sysret64, xxl, insn_buff, len);
 	PATCH_CASE(cpu, wbinvd, xxl, insn_buff, len);
 #endif
 

arch/x86/xen/enlighten_pv.c

@@ -1073,7 +1073,6 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = {
 	.read_pmc = xen_read_pmc,
 
 	.iret = xen_iret,
-	.usergs_sysret64 = xen_sysret64,
 
 	.load_tr_desc = paravirt_nop,
 	.set_ldt = xen_set_ldt,

arch/x86/xen/xen-asm.S

@@ -215,26 +215,6 @@ SYM_CODE_START(xen_iret)
 	jmp hypercall_iret
 SYM_CODE_END(xen_iret)
 
-SYM_CODE_START(xen_sysret64)
-	/*
-	 * We're already on the usermode stack at this point, but
-	 * still with the kernel gs, so we can easily switch back.
-	 *
-	 * tss.sp2 is scratch space.
-	 */
-	movq %rsp, PER_CPU_VAR(cpu_tss_rw + TSS_sp2)
-	movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
-
-	pushq $__USER_DS
-	pushq PER_CPU_VAR(cpu_tss_rw + TSS_sp2)
-	pushq %r11
-	pushq $__USER_CS
-	pushq %rcx
-
-	pushq $VGCF_in_syscall
-	jmp hypercall_iret
-SYM_CODE_END(xen_sysret64)
-
 /*
  * Xen handles syscall callbacks much like ordinary exceptions, which
  * means we have:

arch/x86/xen/xen-ops.h

@@ -138,8 +138,6 @@ __visible unsigned long xen_read_cr2_direct(void);
 
 /* These are not functions, and cannot be called normally */
 __visible void xen_iret(void);
-__visible void xen_sysret32(void);
-__visible void xen_sysret64(void);
 
 extern int xen_panic_handler_init(void);