usb: chipidea: add USB PHY event

Add USB PHY event for below situation:
- usb role changed
- vbus connect
- vbus disconnect
- gadget driver is enumerated

USB PHY driver can get the last event after above situation occurs
and deal with different situations.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230627110353.1879477-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: Xu Yang

drivers/usb/chipidea/ci.h

@@ -281,8 +281,19 @@ static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
 		return -ENXIO;
 
 	ret = ci->roles[role]->start(ci);
-	if (!ret)
-		ci->role = role;
+	if (ret)
+		return ret;
+
+	ci->role = role;
+
+	if (ci->usb_phy) {
+		if (role == CI_ROLE_HOST)
+			usb_phy_set_event(ci->usb_phy, USB_EVENT_ID);
+		else
+			/* in device mode but vbus is invalid*/
+			usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
+	}
+
 	return ret;
 }
 
@@ -296,6 +307,9 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
 	ci->role = CI_ROLE_END;
 
 	ci->roles[role]->stop(ci);
+
+	if (ci->usb_phy)
+		usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
 }
 
 static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci)

drivers/usb/chipidea/udc.c

@@ -1718,6 +1718,13 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 		ret = ci->platdata->notify_event(ci,
 				CI_HDRC_CONTROLLER_VBUS_EVENT);
 
+	if (ci->usb_phy) {
+		if (is_active)
+			usb_phy_set_event(ci->usb_phy, USB_EVENT_VBUS);
+		else
+			usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
+	}
+
 	if (ci->driver)
 		ci_hdrc_gadget_connect(_gadget, is_active);
 
@@ -2034,6 +2041,9 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
 		if (USBi_PCI & intr) {
 			ci->gadget.speed = hw_port_is_high_speed(ci) ?
 				USB_SPEED_HIGH : USB_SPEED_FULL;
+			if (ci->usb_phy)
+				usb_phy_set_event(ci->usb_phy,
+					USB_EVENT_ENUMERATED);
 			if (ci->suspended) {
 				if (ci->driver->resume) {
 					spin_unlock(&ci->lock);