Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
3 contributors

Users who have contributed to this file

@hallard @cyberman54 @FlorianLudwig
33 lines (27 sloc) 1.36 KB
#if(HAS_LORA)
/************************************************************
* LMIC LoRaWAN configuration
*
* Read the values from TTN console (or whatever applies), insert them here,
* and rename this file to src/loraconf.h
*
* Note that DEVEUI, APPEUI and APPKEY should all be specified in MSB format.
* (This is different from standard LMIC-Arduino which expects DEVEUI and APPEUI
* in LSB format.)
* Set your DEVEUI here, if you have one. You can leave this untouched,
* then the DEVEUI will be generated during runtime from device's MAC adress
* and will be displayed on device's screen as well as on serial console.
*
* NOTE: Use MSB format (as displayed in TTN console, so you can cut & paste
* from there)
* For TTN, APPEUI in MSB format always starts with 0x70, 0xB3, 0xD5
*
* Note: If using a board with Microchip 24AA02E64 Uinique ID for deveui,
* the DEVEUI will be overwriten by the one contained in the Microchip module
*
************************************************************/
static const u1_t DEVEUI[8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u1_t APPEUI[8] = {0x70, 0xB3, 0xD5, 0x00, 0x00, 0x00, 0x00, 0x00};
static const u1_t APPKEY[16] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
#endif // HAS_LORA
You can’t perform that action at this time.