User Guide: Graupner HoTT Telemetrie

Carsten Giesen edited this page Jan 16, 2015 · 24 revisions

First you need a adapter because on Taulabs we have Rx/Tx but Graupner support only single wire serial. Graupner HoTT Telemetrie Adapter

Graupner HoTT Telemetrie Adapter

For using HoTT Telemetrie you have to enable one or more so called sensors: Graupner HoTT Telemetrie Adapter

Settings can be do one the HoTT Telemetrie tab Graupner HoTT Telemetrie Adapter

How the sensors work, you can read in the Graupner Manual:

Limit

Item Unit EAM GAM ESC GPS Vario Description
MinSpeed km/h X Minimum speed in km/h
MaxSpeed km/h X Maximum speed in km/h
NegDifference1 m X X X Sink rate / Sec.
PosDifference1 m X X X Climb rate / Sec.
NegDifference2 m X X X Sink rate / 3 Sec.
PosDifference2 m X X X Climb rate / 3 Sec.
MinHeight m X X X Minimum Altitude
MaxHeight m X X X Maximum Altitude
MaxDistance m X Maximum distance in meter
MinPowerVoltage V X X X
MaxPowerVoltage V X X X
MinSensor1Voltage V X X
MaxSensor1Voltage V X X
MinSensor2Voltage V X X
MaxSensor2Voltage V X X
MinCellVoltage V X X
MaxCellVoltage V X X
MaxCurrent A X X X
MaxUsedCapacity mAh X X X
MinSensor1Temp °C X X
MaxSensor1Temp °C X X
MinSensor2Temp °C X
MaxSensor2Temp °C X
MaxServoTemp °C
MinRPM rpm X X X
MaxRPM rpm X X X
MinFuel ml X
MaxServoDifference ???

Warning

Item EAM GAM ESC GPS Vario Description
AltitudeBeep X X X
MinSpeed X
MaxSpeed X
NegDifference1 X X X
PosDifference1 X X X
NegDifference2 X X X
PosDifference2 X X X
MinHeight X X X
MaxHeight X X X
MaxDistance X
MinPowerVoltage X X X
MaxPowerVoltage X X X
MinSensor1Voltage X X
MaxSensor1Voltage X X
MinSensor2Voltage X X
MaxSensor2Voltage X X
MinCellVoltage X X
MaxCurrent X X X
MaxUsedCapacity X X X
MinSensor1Temp X X
MaxSensor1Temp X X
MinSensor2Temp X
MaxSensor2Temp X
MaxServoTemp
MinRPM X X X
MaxRPM X X X
MinFuel X
MaxServoDifference

HowTo Use

Lets make an example: You like to have a warning when you LiPo is going empty.

  1. You have to set Limit / MinPowerVoltage
  2. You have to enable Warning / MinPowerVoltage

In Action

HoTT Multicopter Screen

Indicator 1:

  • ' ' no GPS configured "Dir:" shows "you," the orientation of the compass (otherwise the direction of flight, not the orientation)
  • '!' GPS-Error (like red GPS in GCS)
  • '?' GPS-Warning (yellow, GPS data is there but inaccurate)
  • '.' GPS-OK (green, ready for navigation)

Indicator 2:

  • '-' no Home position (you should NEVER! set the home position in gcs)
  • 'H' Home position triggered. Now 'RTH' is possible. It still recommends taking a look at the distance and the home course before you try this. 'PH' of course works better when the number of satellites is large or a '.' next to it.

HoTT Example: Multicopter Menue

Clone this wiki locally
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.