You can clone with
HTTPS or Subversion.
Updated defconfig for Froyo
Extend overclocking options
Overclock config option to overclock to
1100mhz and 1300mhz as well as a stock option.
Fix config for hardware overlay
Add 16 bit framebuffer support.
Requires SGX modules to be recompiled
Make overclocking a config option
Ignore bootloader passed args
Added kernel config option to ignore kernel
command line args passed by the bootloader.
Drop 1ghz overclock, add 1.15ghz
Remove debug, proper bootargs, better memory timings, optimizations, etc
Config: utf8 and advanced routing for Cisco VPNs
Overclock DSP at all OPPs. TUN driver in kernel
Update defconfig for cifs and tun modules
Revert "Updated to 188.8.131.52. Working."
Something in this update caused a significant
drop in IO performance as found by Divine_Madcat
This reverts commit 8437cae.
add config for networking
Add missing file
Backport code calculating idle time from 2.6.34
2.6.31 scheduling changes
Fixed interactive governor
Sensitivity seems about where it should be.
If left idle it eventually goes to 300mhz and
stays there.(unless you are connected via usb of course)
Add interactive governor
Seems to work well but perhaps ever
so slightly too sensitive. Needs testing
while nook is idle with screen off.
Updated to 184.108.40.206. Working.
cpufreq and omap transition latency tweaks
Reducing omap transition latency to reasonable value.
This is defferable so it does not effect idle wake ups.
Keep stock speed at boot.
Limit clock to 800mhz during init. Overclock must be set with cpufreq.
Increase speaker and headset volume by 1.5db
part 2 of these changes-- the cache file itself
MAYBE fix to evil kp. Backported 2.6.32 arm cache. Verify, Dalingrin.…
to prevent initial slugishness of the touchscreen I power it down and…
… up once
removed the outer 4 pixels of the touchscreen to make touchscreen not…
… snap to the extremes and buttons easier to press
ugly but works
changing namespace to 'encore' rather than 'nookcolor'
changed board name to 'nookcolor' so that correct init.rc is run.
turn on support for large files so that /data can be mounted rw
ext4 support. Also this is my first checkin ever.
updated framebuffer counts for v4l2 interface
adding new omap3621_nookcolor_defconfig