New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

RF: Centralize submodule addition logic in GitRepo #2904

Merged
merged 4 commits into from Oct 10, 2018

Conversation

Projects
None yet
3 participants
@mih
Member

mih commented Oct 8, 2018

Essential verification check was only available in add

  • fix #2909
  • adjust Repo tests to handle the newly reported issues during submodule addition (prev. silent or different)

mih added a commit to datalad/datalad-revolution that referenced this pull request Oct 8, 2018

# submodule that cripples git operations
if not subm.get_hexsha():
raise InvalidGitRepositoryError(
'cannot add subdataset %s with no commits', subm)

This comment has been minimized.

@kyleam

kyleam Oct 8, 2018

Member

This message needs to be formatted.

This comment has been minimized.

@mih

mih Oct 9, 2018

Member

Thx.

mih added some commits Oct 8, 2018

mih added some commits Oct 9, 2018

BF: bring back .git setup wrangling (fixes gh-2909)
Otherwise direct use of GitRepo.add_submodule() yields a setup that we
would not expect in other areas of DataLad. Previously the tests did not
notice this, but now more throurough assertions are in place.
BF+TST: Adjust test to even get to the code line that it should test
Previously relied on a situation that even Git cannot deal with
(submodule without a commit)

@mih mih force-pushed the rf-addsubmodule branch from 201d2e1 to ec08e0b Oct 9, 2018

@codecov

This comment has been minimized.

codecov bot commented Oct 9, 2018

Codecov Report

Merging #2904 into master will increase coverage by <.01%.
The diff coverage is 93.1%.

Impacted file tree graph

@@            Coverage Diff             @@
##           master    #2904      +/-   ##
==========================================
+ Coverage   90.28%   90.28%   +<.01%     
==========================================
  Files         246      246              
  Lines       31889    31902      +13     
==========================================
+ Hits        28790    28804      +14     
+ Misses       3099     3098       -1
Impacted Files Coverage Δ
datalad/distribution/utils.py 96.34% <ø> (-0.18%) ⬇️
datalad/distribution/get.py 89.55% <100%> (-0.05%) ⬇️
datalad/support/tests/test_gitrepo.py 100% <100%> (ø) ⬆️
datalad/distribution/add.py 96.11% <66.66%> (+0.92%) ⬆️
datalad/support/gitrepo.py 88.8% <95.65%> (+0.17%) ⬆️

Continue to review full report at Codecov.

Legend - Click here to learn more
Δ = absolute <relative> (impact), ø = not affected, ? = missing data
Powered by Codecov. Last update 1748863...ec08e0b. Read the comment docs.

@mih mih merged commit d43abf4 into master Oct 10, 2018

12 checks passed

WIP ready for review
Details
codecov/patch 93.1% of diff hit (target 90.28%)
Details
codecov/project 90.28% (+<.01%) compared to 1748863
Details
continuous-integration/appveyor/branch AppVeyor build succeeded
Details
continuous-integration/appveyor/pr AppVeyor build succeeded
Details
continuous-integration/travis-ci/pr The Travis CI build passed
Details
continuous-integration/travis-ci/push The Travis CI build passed
Details
datalad-pr-dl-osx-64 DEV build done.
Details
datalad-pr-docker-dl-nd14_04 DEV build done.
Details
datalad-pr-docker-dl-nd16_04 DEV build done.
Details
datalad-pr-docker-dl-nd80 DEV build done.
Details
datalad-pr-docker-dl-nd90 DEV build done.
Details

@mih mih deleted the rf-addsubmodule branch Oct 10, 2018

@yarikoptic yarikoptic modified the milestone: Release 0.10.4 Oct 22, 2018

yarikoptic added a commit that referenced this pull request Oct 24, 2018

Merge tag '0.11.0' into debian
 Upgrade of [git-annex] to the most recent available to your release is
 advisable since a number of issues were resolved at that level.

 ### Major refactoring and deprecations

 - `datalad.consts.LOCAL_CENTRAL_PATH` constant was deprecated in favor
   of `datalad.locations.default-dataset` [configuration] variable
   ([#2835])

 ### Minor refactoring

 - `"notneeded"` messages are no longer reported by default results
   renderer
 - [run] no longer shows commit instructions upon command failure when
   `explicit` is true and no outputs are specified ([#2922])
 - `get_git_dir` moved into GitRepo ([#2886])
 - `_gitpy_custom_call` removed from GitRepo ([#2894])
 - `GitRepo.get_merge_base` argument is now called `commitishes` instead
   of `treeishes` ([#2903])

 ### Fixes

 - [update] should not leave the dataset in non-clean state ([#2858])
   and some other enhancements ([#2859])
 - Fixed chunking of the long command lines to account for decorators
   and other arguments ([#2864])
 - Progress bar should not crash the process on some missing progress
   information ([#2891])
 - Default value for `jobs` set to be `"auto"` (not `None`) to take
   advantage of possible parallel get if in `-g` mode ([#2861])
 - [wtf] must not crash if `git-annex` is not installed etc ([#2865]),
   ([#2865]), ([#2918]), ([#2917])
 - Fixed paths (with spaces etc) handling while reporting annex error
   output ([#2892]), ([#2893])
 - `__del__` should not access `.repo` but `._repo` to avoid attempts
   for reinstantiation etc ([#2901])
 - Fix up submodule `.git` right in `GitRepo.add_submodule` to avoid
   added submodules being non git-annex friendly ([#2909]), ([#2904])
 - [run-procedure] ([#2905])
   - now will provide dataset into the procedure if called within dataset
   - will not crash if procedure is an executable without `.py` or `.sh`
     suffixes
 - Use centralized `.gitattributes` handling while setting annex backend
   ([#2912])
 - `GlobbedPaths.expand(..., full=True)` incorrectly returned relative
    paths when called more than once ([#2921])

 ### Enhancements and new features

 - Report progress on [clone] when installing from "smart" git servers
   ([#2876])
 - Stale/unused `sth_like_file_has_content` was removed ([#2860])
 - Enhancements to [search] to operate on "improved" metadata layouts
   ([#2878])
 - Output of `git annex init` operation is now logged ([#2881])
 - New
   - `GitRepo.cherry_pick` ([#2900])
   - `GitRepo.format_commit` ([#2902])
 - [run-procedure] ([#2905])
   - procedures can now recursively be discovered in subdatasets as well.
     The uppermost has highest priority
   - Procedures in user and system locations now take precedence over
     those in datasets.

* tag '0.11.0':
  Make it a 0.11.0 release since there were some API RFings
  REL: slight tune up to Changelog following the advices
  DOC: v0.10.4: Mention change in procedure precedence (a0cbcba)
  DOC: v0.10.4: Fix description of db715b7
  DOC: v0.10.4: Improve description of 6f615a4
  DOC: v0.10.4: Remove duplicate word

yarikoptic added a commit that referenced this pull request Oct 24, 2018

Merge tag '0.11.0' into debian
 ## 0.11.0 (Oct 23, 2018) -- Soon-to-be-perfect

 [git-annex] 6.20180913 (or later) is now required - provides a number of
 fixes for v6 mode operations etc.

 ### Major refactoring and deprecations

 - `datalad.consts.LOCAL_CENTRAL_PATH` constant was deprecated in favor
   of `datalad.locations.default-dataset` [configuration] variable
   ([#2835])

 ### Minor refactoring

 - `"notneeded"` messages are no longer reported by default results
   renderer
 - [run] no longer shows commit instructions upon command failure when
   `explicit` is true and no outputs are specified ([#2922])
 - `get_git_dir` moved into GitRepo ([#2886])
 - `_gitpy_custom_call` removed from GitRepo ([#2894])
 - `GitRepo.get_merge_base` argument is now called `commitishes` instead
   of `treeishes` ([#2903])

 ### Fixes

 - [update] should not leave the dataset in non-clean state ([#2858])
   and some other enhancements ([#2859])
 - Fixed chunking of the long command lines to account for decorators
   and other arguments ([#2864])
 - Progress bar should not crash the process on some missing progress
   information ([#2891])
 - Default value for `jobs` set to be `"auto"` (not `None`) to take
   advantage of possible parallel get if in `-g` mode ([#2861])
 - [wtf] must not crash if `git-annex` is not installed etc ([#2865]),
   ([#2865]), ([#2918]), ([#2917])
 - Fixed paths (with spaces etc) handling while reporting annex error
   output ([#2892]), ([#2893])
 - `__del__` should not access `.repo` but `._repo` to avoid attempts
   for reinstantiation etc ([#2901])
 - Fix up submodule `.git` right in `GitRepo.add_submodule` to avoid
   added submodules being non git-annex friendly ([#2909]), ([#2904])
 - [run-procedure] ([#2905])
   - now will provide dataset into the procedure if called within dataset
   - will not crash if procedure is an executable without `.py` or `.sh`
     suffixes
 - Use centralized `.gitattributes` handling while setting annex backend
   ([#2912])
 - `GlobbedPaths.expand(..., full=True)` incorrectly returned relative
    paths when called more than once ([#2921])

 ### Enhancements and new features

 - Report progress on [clone] when installing from "smart" git servers
   ([#2876])
 - Stale/unused `sth_like_file_has_content` was removed ([#2860])
 - Enhancements to [search] to operate on "improved" metadata layouts
   ([#2878])
 - Output of `git annex init` operation is now logged ([#2881])
 - New
   - `GitRepo.cherry_pick` ([#2900])
   - `GitRepo.format_commit` ([#2902])
 - [run-procedure] ([#2905])
   - procedures can now recursively be discovered in subdatasets as well.
     The uppermost has highest priority
   - Procedures in user and system locations now take precedence over
     those in datasets.

* tag '0.11.0':
  CHANGELOG adjusted to reflect new minimal version of git-annex
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment