Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Tag: zsh-sync-ognus…
Fetching contributors…

Cannot retrieve contributors at this time

645 lines (552 sloc) 23.656 kB
# DIST: This is the distribution Makefile for Emacs. configure can
# DIST: make most of the changes to this file you might want, so try
# DIST: that first.
# make all to compile and build Emacs.
# make install to install it.
# make TAGS to update tags tables.
#
# make clean or make mostlyclean
# Delete all files from the current directory that are normally
# created by building the program. Don't delete the files that
# record the configuration. Also preserve files that could be made
# by building, but normally aren't because the distribution comes
# with them.
#
# Delete `.dvi' files here if they are not part of the distribution.
#
# make distclean
# Delete all files from the current directory that are created by
# configuring or building the program. If you have unpacked the
# source and built the program without creating any other files,
# `make distclean' should leave only the files that were in the
# distribution.
#
# make maintainer-clean
# Delete everything from the current directory that can be
# reconstructed with this Makefile. This typically includes
# everything deleted by distclean, plus more: C source files
# produced by Bison, tags tables, info files, and so on.
#
# make extraclean
# Still more severe - delete backup and autosave files, too.
SHELL = /bin/sh
# If Make doesn't predefine MAKE, set it here.
@SET_MAKE@
# ==================== Things `configure' Might Edit ====================
CC=@CC@
CPP=@CPP@
C_SWITCH_SYSTEM=@c_switch_system@
ALLOCA=@ALLOCA@
LN_S=@LN_S@
CFLAGS=@CFLAGS@
LDFLAGS=@LDFLAGS@
CPPFLAGS=@CPPFLAGS@
C_SWITCH_X_SITE=@C_SWITCH_X_SITE@
LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@
YACC=@YACC@
### These help us choose version- and architecture-specific directories
### to install files in.
### This should be the number of the Emacs version we're building,
### like `18.59' or `19.0'.
version=@version@
### This should be the name of the configuration we're building Emacs
### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
configuration=@configuration@
# ==================== Where To Install Things ====================
# The default location for installation. Everything is placed in
# subdirectories of this directory. The default values for many of
# the variables below are expressed in terms of this one, so you may
# not need to change them. This defaults to /usr/local.
prefix=@prefix@
# Like `prefix', but used for architecture-specific files.
exec_prefix=@exec_prefix@
# Where to install Emacs and other binaries that people will want to
# run directly (like etags).
bindir=@bindir@
# Where to install architecture-independent data files. ${lispdir}
# and ${etcdir} are subdirectories of this.
datadir=@datadir@
# Where to install and expect the files that Emacs modifies as it
# runs. These files are all architecture-independent.
# Right now, this is not used.
sharedstatedir=@sharedstatedir@
# Where to install and expect executable files to be run by Emacs
# rather than directly by users, and other architecture-dependent
# data. ${archlibdir} is a subdirectory of this.
libexecdir=@libexecdir@
# Where to install Emacs's man pages, and what extension they should have.
mandir=@mandir@
manext=.1
man1dir=$(mandir)/man1
# Where to install and expect the info files describing Emacs. In the
# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but
# since there are now many packages documented with the texinfo
# system, it is inappropriate to imply that it is part of Emacs.
infodir=@infodir@
# Where to look for bitmap files.
bitmapdir=@bitmapdir@
# Where to find the source code. The source code for Emacs's C kernel is
# expected to be in ${srcdir}/src, and the source code for Emacs's
# utility programs is expected to be in ${srcdir}/lib-src. This is
# set by the configure script's `--srcdir' option.
# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
srcdir=@srcdir@
# Tell make where to find source files; this is needed for the makefiles.
VPATH=@srcdir@
# Where to find the application default.
x_default_search_path=@x_default_search_path@
# ==================== Emacs-specific directories ====================
# These variables hold the values Emacs will actually use. They are
# based on the values of the standard Make variables above.
# Where to install the lisp files distributed with
# Emacs. This includes the Emacs version, so that the
# lisp files for different versions of Emacs will install
# themselves in separate directories.
lispdir=@lispdir@
# Directories Emacs should search for lisp files specific
# to this site (i.e. customizations), before consulting
# ${lispdir}. This should be a colon-separated list of
# directories.
locallisppath=@locallisppath@
# Where Emacs will search to find its lisp files. Before
# changing this, check to see if your purpose wouldn't
# better be served by changing locallisppath. This
# should be a colon-separated list of directories.
lisppath=@lisppath@
# Where Emacs will search for its lisp files while
# building. This is only used during the process of
# compiling Emacs, to help Emacs find its lisp files
# before they've been installed in their final location.
# It's usually identical to lisppath, except that
# it does not include locallisppath, and the
# entry for the directory containing the installed lisp
# files has been replaced with ../lisp. This should be a
# colon-separated list of directories.
buildlisppath=${srcdir}/lisp
# Where to install the other architecture-independent
# data files distributed with Emacs (like the tutorial,
# the cookie recipes and the Zippy database). This path
# usually contains the Emacs version number, so the data
# files for multiple versions of Emacs may be installed
# at once.
etcdir=@etcdir@
# Where to put executables to be run by Emacs rather than
# the user. This path usually includes the Emacs version
# and configuration name, so that multiple configurations
# for multiple versions of Emacs may be installed at
# once.
archlibdir=@archlibdir@
# Where to put the docstring file.
docdir=@docdir@
# ==================== Utility Programs for the Build ====================
# Allow the user to specify the install program.
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_INFO = install-info
# By default, we uphold the dignity of our programs.
INSTALL_STRIP =
# ============================= Targets ==============================
# What emacs should be called when installed.
EMACS = emacs
# Subdirectories to make recursively. `lisp' is not included
# because the compiled lisp files are part of the distribution
# and you cannot remake them without installing Emacs first.
SUBDIR = lib-src src leim
# The makefiles of the directories in $SUBDIR.
SUBDIR_MAKEFILES = lib-src/Makefile man/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile
# Subdirectories to install, and where they'll go.
# lib-src's makefile knows how to install it, so we don't do that here.
# leim's makefile also knows how to install it, so we don't do that here.
# When installing the info files, we need to do special things to
# avoid nuking an existing dir file, so we don't do that here;
# instead, we have written out explicit code in the `install' targets.
COPYDIR = ${srcdir}/etc ${srcdir}/lisp
COPYDESTS = ${etcdir} ${lispdir}
all: ${SUBDIR}
removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'
# Generate epaths.h from epaths.in. This target is invoked by `configure'.
epaths-force: FRC
@(lisppath=`echo ${lisppath} | ${removenullpaths}` ; \
buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ; \
x_default_search_path=`echo ${x_default_search_path}`; \
sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
-e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'$${lisppath}'";' \
-e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'$${buildlisppath}'";' \
-e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
-e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
-e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
-e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
-e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
-e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";') && \
${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h
# For parallel make, src should be build before leim.
leim: src
src: lib-src FRC
lib-src: FRC src/config.stamp
.RECURSIVE: ${SUBDIR}
${SUBDIR}: ${SUBDIR_MAKEFILES} FRC
cd $@; $(MAKE) all $(MFLAGS) \
CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
blessmail: ${SUBDIR_MAKEFILES} src FRC
cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \
MAKE='${MAKE}' archlibdir='$(archlibdir)'
Makefile: $(srcdir)/Makefile.in config.status
./config.status
config.status: ${srcdir}/configure
./config.status --recheck
${srcdir}/configure: configure.in aclocal.m4
cd ${srcdir} && autoconf
src/Makefile: $(srcdir)/src/Makefile.in config.status
./config.status
src/config.stamp: $(srcdir)/src/config.in config.status
./config.status
touch src/config.stamp
lib-src/Makefile: $(srcdir)/lib-src/Makefile.in config.status
./config.status
man/Makefile: $(srcdir)/man/Makefile.in config.status
./config.status
oldXMenu/Makefile: $(srcdir)/oldXMenu/Makefile.in config.status
./config.status
lwlib/Makefile: $(srcdir)/lwlib/Makefile.in config.status
./config.status
leim/Makefile: $(srcdir)/leim/Makefile.in config.status
./config.status
# ==================== Installation ====================
## If we let lib-src do its own installation, that means we
## don't have to duplicate the list of utilities to install in
## this Makefile as well.
## On AIX, use tar xBf.
## On Xenix, use tar xpf.
.PHONY: install mkdir
## We delete each directory in ${COPYDESTS} before we copy into it;
## that way, we can reinstall over directories that have been put in
## place with their files read-only (perhaps because they are checked
## into RCS). In order to make this safe, we make sure that the
## source exists and is distinct from the destination.
### We do install-arch-indep first because
### the executable needs the Lisp files and DOC file to work properly.
install: all install-arch-indep install-arch-dep install-leim blessmail
@true
### Install the executables that were compiled specifically for this machine.
### It would be nice to do something for a parallel make
### to ensure that install-arch-indep finishes before this starts.
install-arch-dep: mkdir
(cd lib-src; \
$(MAKE) install $(MFLAGS) prefix=${prefix} \
exec_prefix=${exec_prefix} bindir=${bindir} \
libexecdir=${libexecdir} archlibdir=${archlibdir} \
INSTALL_STRIP=${INSTALL_STRIP})
${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs ${bindir}/emacs-${version}
-chmod 1755 ${bindir}/emacs-${version}
rm -f ${bindir}/$(EMACS)
-ln ${bindir}/emacs-${version} ${bindir}/$(EMACS)
-unset CDPATH; \
for f in `cd lib-src && echo fns-*.el`; do \
if test -r lib-src/$$f ; then \
${INSTALL_DATA} lib-src/$$f ${archlibdir}/$$f; \
else true; fi ; \
done
### Install the files that are machine-independent.
### Most of them come straight from the distribution;
### the exception is the DOC-* files, which are copied
## from the build directory.
## Note that we copy DOC* and then delete DOC
## as a workaround for a bug in tar on Ultrix 4.2.
install-arch-indep: mkdir info
-set ${COPYDESTS} ; \
unset CDPATH; \
for dir in ${COPYDIR} ; do \
if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \
rm -rf $$1 ; \
fi ; \
shift ; \
done
-set ${COPYDESTS} ; \
mkdir ${COPYDESTS} ; \
chmod ugo+rx ${COPYDESTS} ; \
unset CDPATH; \
for dir in ${COPYDIR} ; do \
dest=$$1 ; shift ; \
[ -d $${dir} ] \
&& [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \
&& (echo "Copying $${dir} to $${dest}..." ; \
(cd $${dir}; tar -cf - . ) \
| (cd $${dest}; umask 022; \
tar -xvf - && cat > /dev/null) || exit 1; \
for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \
chmod a+rx $${subdir} ; \
rm -rf $${subdir}/RCS ; \
rm -rf $${subdir}/CVS ; \
rm -f $${subdir}/\#* ; \
rm -f $${subdir}/.\#* ; \
rm -f $${subdir}/*~ ; \
rm -f $${subdir}/*.orig ; \
rm -f $${subdir}/[mM]akefile* ; \
rm -f $${subdir}/ChangeLog* ; \
rm -f $${subdir}/dired.todo ; \
done) ; \
done
-rm -f ${lispdir}/subdirs.el
$(srcdir)/update-subdirs ${lispdir}
if [ -f ${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \
then true; \
else \
(echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
echo " (normal-top-level-add-subdirs-to-load-path))") \
> ${datadir}/emacs/${version}/site-lisp/subdirs.el; \
fi
chmod a+r ${datadir}/emacs/${version}/site-lisp/subdirs.el
-if [ -f ${datadir}/emacs/site-lisp/subdirs.el ]; \
then true; \
else \
(echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
echo " (normal-top-level-add-subdirs-to-load-path))") \
> ${datadir}/emacs/site-lisp/subdirs.el; \
fi
-chmod a+r ${datadir}/emacs/site-lisp/subdirs.el
-unset CDPATH; \
if [ `(cd ./etc; /bin/pwd)` != `(cd ${docdir}; /bin/pwd)` ]; \
then \
echo "Copying etc/DOC-* to ${docdir} ..." ; \
(cd ./etc; tar -cf - DOC*) \
|(cd ${docdir}; umask 0; tar -xvf - && cat > /dev/null) || exit 1; \
(cd $(docdir); chmod a+r DOC*; rm DOC); \
else true; fi
-unset CDPATH; \
if [ -r ./lisp ] \
&& [ -r ./lisp/simple.el ] \
&& [ x`(cd ./lisp; /bin/pwd)` != x`(cd ${lispdir}; /bin/pwd)` ] \
&& [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \
then \
echo "Copying lisp/*.el and lisp/*.elc to ${lispdir} ..." ; \
(cd lisp; tar -cf - *.el *.elc) \
|(cd ${lispdir}; umask 0; tar -xvf - && cat > /dev/null) || exit 1; \
else true; fi
-unset CDPATH; \
thisdir=`/bin/pwd`; \
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
then \
(cd ${infodir}; \
if [ -f dir ]; then true; \
else \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir; \
chmod a+r ${infodir}/dir); \
fi; \
cd ${srcdir}/info ; \
for f in ada-mode* autotype* ccmode* cl* dired-x* ebrowse* ediff* efaq* emacs* eshell* eudc* forms* gnus* idlwave* info* message* mh-e* pcl-cvs* reftex* sc* speedbar* vip* widget* woman*; do \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/info/$$f ${infodir}/$$f; \
chmod a+r ${infodir}/$$f); \
done); \
else true; fi
-unset CDPATH; \
thisdir=`/bin/pwd`; \
if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd ${infodir} && /bin/pwd)` ]; \
then \
for f in ada-mode autotype ccmode cl dired-x ebrowse ediff efaq emacs emacs-mime eshell eudc forms gnus idlwave info message mh-e pcl-cvs reftex sc speedbar vip viper widget woman; do \
(cd $${thisdir}; \
${INSTALL_INFO} --info-dir=${infodir} ${infodir}/$$f); \
done; \
else true; fi
-chmod -R a+r ${datadir}/emacs ${COPYDESTS} ${infodir}
thisdir=`/bin/pwd`; \
cd ${srcdir}/etc; \
for page in emacs etags ctags ; do \
(cd $${thisdir}; \
${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${man1dir}/$${page}${manext}; \
chmod a+r ${man1dir}/$${page}${manext}); \
done
### Install LEIM files. Although they are machine-independent, we
### have separate target here instead of including it in
### `install-arch-indep'. People who extracted LEIM files after they
### insalled Emacs itself can install only LEIM files by this target.
install-leim: leim/Makefile mkdir
cd leim; $(MAKE) install
### Build Emacs and install it, stripping binaries while installing them.
install-strip:
$(MAKE) INSTALL_STRIP=-s install
### Build all the directories we're going to install Emacs in. Since
### we may be creating several layers of directories (for example,
### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs
### instead of mkdir. Not all systems' mkdir programs have the `-p' flag.
mkdir: FRC
if [ -d ${datadir} ]; then true; else \
$(srcdir)/mkinstalldirs ${datadir}; \
chmod a+r ${datadir};\
fi
$(srcdir)/mkinstalldirs ${COPYDESTS} ${infodir} ${man1dir} \
${bindir} ${docdir} ${libexecdir} \
${datadir}/emacs/site-lisp \
${datadir}/emacs/${version}/site-lisp \
`echo ${locallisppath} | sed 's/:/ /g'`
### Delete all the installed files that the `install' target would
### create (but not the noninstalled files such as `make all' would
### create).
###
### Don't delete the lisp and etc directories if they're in the source tree.
uninstall:
(cd lib-src; \
$(MAKE) $(MFLAGS) uninstall \
prefix=${prefix} exec_prefix=${exec_prefix} \
bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})
-unset CDPATH; \
for dir in ${lispdir} ${etcdir} ; do \
if [ -d $${dir} ]; then \
case `(cd $${dir} ; /bin/pwd)` in \
`(cd ${srcdir} ; /bin/pwd)`* ) ;; \
* ) rm -rf $${dir} ;; \
esac ; \
case $${dir} in \
${datadir}/emacs/${version}/* ) \
rm -rf ${datadir}/emacs/${version} \
;; \
esac ; \
fi ; \
done
(cd ${infodir} && rm -f cl* dired-x* ediff* emacs* forms* gnus* info* mh-e* sc* vip*)
(cd ${man1dir} && rm -f emacs.1 etags.1 ctags.1)
(cd ${bindir} && rm -f emacs-${version} $(EMACS))
FRC:
# ==================== Cleaning up and miscellanea ====================
.PHONY: mostlyclean clean distclean maintainer-clean extraclean
### `mostlyclean'
### Like `clean', but may refrain from deleting a few files that people
### normally don't want to recompile. For example, the `mostlyclean'
### target for GCC does not delete `libgcc.a', because recompiling it
### is rarely necessary and takes a lot of time.
mostlyclean: FRC
(cd src; $(MAKE) $(MFLAGS) mostlyclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
(cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
(cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
-(cd man && $(MAKE) $(MFLAGS) mostlyclean)
(cd leim; $(MAKE) $(MFLAGS) mostlyclean)
### `clean'
### Delete all files from the current directory that are normally
### created by building the program. Don't delete the files that
### record the configuration. Also preserve files that could be made
### by building, but normally aren't because the distribution comes
### with them.
###
### Delete `.dvi' files here if they are not part of the distribution.
clean: FRC
(cd src; $(MAKE) $(MFLAGS) clean)
(cd oldXMenu; $(MAKE) $(MFLAGS) clean)
(cd lwlib; $(MAKE) $(MFLAGS) clean)
(cd lib-src; $(MAKE) $(MFLAGS) clean)
-(cd man && $(MAKE) $(MFLAGS) clean)
(cd leim; $(MAKE) $(MFLAGS) clean)
### `distclean'
### Delete all files from the current directory that are created by
### configuring or building the program. If you have unpacked the
### source and built the program without creating any other files,
### `make distclean' should leave only the files that were in the
### distribution.
top_distclean=\
rm -f config.status config.cache config.log ; \
rm -f Makefile ${SUBDIR_MAKEFILES} ; \
if [ -d lock ] ; then (cd lock && (rm -f * || true)); else true; fi
distclean: FRC
(cd src; $(MAKE) $(MFLAGS) distclean)
(cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
(cd lwlib; $(MAKE) $(MFLAGS) distclean)
(cd lib-src; $(MAKE) $(MFLAGS) distclean)
(cd man && $(MAKE) $(MFLAGS) distclean)
(cd leim; $(MAKE) $(MFLAGS) distclean)
(cd lisp; $(MAKE) $(MFLAGS) distclean)
${top_distclean}
### `maintainer-clean'
### Delete everything from the current directory that can be
### reconstructed with this Makefile. This typically includes
### everything deleted by distclean, plus more: C source files
### produced by Bison, tags tables, info files, and so on.
###
### One exception, however: `make maintainer-clean' should not delete
### `configure' even if `configure' can be remade using a rule in the
### Makefile. More generally, `make maintainer-clean' should not delete
### anything that needs to exist in order to run `configure' and then
### begin to build the program.
maintainer-clean: FRC
(cd src; $(MAKE) $(MFLAGS) maintainer-clean)
(cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
(cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
-(cd man && $(MAKE) $(MFLAGS) maintainer-clean)
(cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
${top_distclean}
### This doesn't actually appear in the coding standards, but Karl
### says GCC supports it, and that's where the configuration part of
### the coding standards seem to come from. It's like distclean, but
### it deletes backup and autosave files too.
extraclean:
for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
${top_distclean}
-rm -f config-tmp-*
-rm -f *~ \#*
### Unlocking and relocking. The idea of these productions is to reduce
### hassles when installing an incremental tar of Emacs. Do `make unlock'
### before unlocking the file to take the write locks off all sources so
### that tar xvof will overwrite them without fuss. Then do `make relock'
### afterward so that VC mode will know which files should be checked in
### if you want to mung them.
###
### Note: it's no disaster if these productions miss a file or two; tar
### and VC will swiftly let you know if this happens, and it is easily
### corrected.
SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in \
README configure make-dist move-if-change
.PHONY: unlock relock
unlock:
chmod u+w $(SOURCES)
-(cd elisp; chmod u+w Makefile README *.texi)
(cd etc; $(MAKE) $(MFLAGS) unlock)
(cd lib-src; $(MAKE) $(MFLAGS) unlock)
(cd lisp; $(MAKE) $(MFLAGS) unlock)
(cd lisp/term; chmod u+w README *.el)
(cd man; chmod u+w *texi* ChangeLog split-man)
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
(cd lwlib; chmod u+w *.[ch] Makefile README)
(cd src; $(MAKE) $(MFLAGS) unlock)
relock:
chmod u-w $(SOURCES)
-(cd elisp; chmod u-w Makefile README *.texi)
(cd etc; $(MAKE) $(MFLAGS) relock)
(cd lib-src; $(MAKE) $(MFLAGS) relock)
(cd lisp; $(MAKE) $(MFLAGS) relock)
(cd lisp/term; chmod u+w README *.el)
(cd man; chmod u+w *texi* ChangeLog split-man)
(cd oldXMenu; chmod u+w *.[ch] Makefile README)
(cd lwlib; chmod u+w *.[ch] Makefile README)
(cd src; $(MAKE) $(MFLAGS) relock)
# The src subdir knows how to do the right thing
# even when the build directory and source dir are different.
TAGS tags: lib-src src
cd src; $(MAKE) tags
check:
@echo "We don't have any tests for GNU Emacs yet."
dist:
cd ${srcdir}; ./make-dist
.PHONY: info dvi dist check html
force-info:
# Note that man/Makefile knows how to
# put the info files in $(srcdir),
# so we can do ok running make in the build dir.
info: force-info
(cd man; $(MAKE) $(MFLAGS) info)
dvi:
(cd man; $(MAKE) $(MFLAGS) dvi)
#### Bootstrapping.
### This is meant for Emacs maintainers only. It first cleans the
### lisp subdirectory, removing all compiled Lisp files. Then a
### special emacs executable is built from Lisp sources, which is then
### used to compile Lisp files. The last step is a "normal" make.
bootstrap: clean bootstrap-lisp-1 bootstrap-src bootstrap-lisp clean all info
bootstrap-lisp-1:
(cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
bootstrap-lisp:
-(cd lisp; $(MAKE) $(MFLAGS) bootstrap EMACS=../src/bootstrap-emacs)
bootstrap-src:
(cd src; $(MAKE) $(MFLAGS) bootstrap)
Jump to Line
Something went wrong with that request. Please try again.