This is a collections of Python plugin for Collectd.

• cpu_temp.py: Report the CPU temperature. Tested on a Raspberry Pi 3.
• sht21.py: Measure temperature and relative humidity from a Sensirion SHT21 sensor connected via I²C. Calculate dew point and absolute humidity. Tested on a Raspberry Pi 3.
• shtc3.py: Measure temperature and relative humidity from a Sensirion SHTC3 sensor connected via I²C. Calculate dew point and absolute humidity. Tested on a Raspberry Pi 3.
• mcp3425.py: Measure voltage using an MCP3425 analog-digital converter.

For more information, please refer to my blogpost.

Copy the desired Python files to your target system. Then add the module to your collectd.conf. Make sure to adjust the ModulePath value. The following example assumes the plugins were copied to /opt/collectd_plugins.

If your CPU temperature cannot be read from /sys/class/thermal/thermal_zone0/temp, make sure to adjust that variable too.

LoadPlugin python
<Plugin python>
    ModulePath "/opt/collectd_plugins"
    Import "cpu_temp"
    <Module cpu_temp>
        Path "/sys/class/thermal/thermal_zone0/temp"
    </Module>
</Plugin>

For this plugin to work, the sht21 kernel module must be loaded:

echo "sht21" > /etc/modules-load.d/sht21.conf

There are currently no configuration options available.

LoadPlugin python
<Plugin python>
    ModulePath "/opt/collectd_plugins"
    Import "sht21"
</Plugin>

For this plugin to work, the shtc1 kernel module must be loaded:

echo "shtc1" > /etc/modules-load.d/shtc1.conf
modprobe shtc1

Default config:

LoadPlugin python
<Plugin python>
    ModulePath "/opt/collectd_plugins"
    Import "shtc3"
</Plugin>

Optionally, the hwmon device (hwmon0 by default) can be configured:

LoadPlugin python
<Plugin python>
    ModulePath "/opt/collectd_plugins"
    Import "shtc3"
    <Module shtc3>
        Hwmon "hwmon2"
    </Module>
</Plugin>

The plugin assumes that you're using three voltage divider resistors to bring the voltage into a measurable range. You can configure them in the Python script.

This plugin requires the python-smbus package to be installed.

There are currently no configuration options available.

LoadPlugin python
<Plugin python>
    ModulePath "/opt/collectd_plugins"
    Import "mcp3425"
</Plugin>

This is my personal collection of plugins. If you also created a Collectd plugin that's great! I won't accept pull requests for now though since I cannot test and maintain plugins for which I don't have any matching hardware.

Instead, feel free to create a pull request to add your plugin to the list below!

• arris_modem.py: Report the upstream/downstream channels of an Arris DOCSIS3 cable modem.

MIT License, see LICENSE file.