Permalink
Switch branches/tags
Find file
Fetching contributors…
Cannot retrieve contributors at this time
446 lines (393 sloc) 11.9 KB
# Some overall notes on how this works
#
# * We smoke using the system provided latest, and custom built "oddball perls"
# The reason for not having a blanket matrix is to conserve travis resources
# as a full DBIC depchain isn't cheap
#
# * Minimum perl officially supported by DBIC is 5.8.3. This *includes* the
# basic depchain. On failure either attempt to fix it or bring it to the
# attention of the maintainer. *DO NOT* disable 5.8 testing - it is here for
# a very good reason
#
# the entire run times out after 50 minutes, or after 5 minutes without
# console output
#
# Smoke all branches except for blocked* and wip/*
branches:
except:
- /^wip\//
- /^blocked/
notifications:
irc:
channels:
- "irc.perl.org#dbic-smoke"
template:
- "%{branch}#%{build_number} by %{author}: %{message} (%{build_url})"
on_success: change
on_failure: always
use_notice: true
email:
recipients:
- CPAN-CI@leporine.io
on_success: change
on_failure: always
addons:
apt:
packages:
- libapp-nopaste-perl
- net-tools
# This is probably a net-loss for setup etc - a bare 'C' will likely fare much better
language: perl
# Currently not trying osx: https://github.com/travis-ci/travis-ci/issues/2314
os: linux
# The defaults run under the more rapid container infra. The hardware is
# actually *much* slower, but the jobs start much faster, for more info see
# https://docs.travis-ci.com/user/ci-environment/#Virtualization-environments
# Combined with 'fast_finish' this will result in an "uh-oh" email as early
# as possible
dist: precise
sudo: false
env: CLEANTEST=true
perl:
- "5.8"
- "5.10"
- "5.22-extras"
matrix:
fast_finish: true
include:
# Same as the "master matrix" above, frozen under older dist/infrastructure
# In genereal it is strongly recommended to keep things on the older
# version indefinitely - there is little value in-depth smoking on
# more recent software stacks
# Add moderate (not complete) poisoning, as these will run on PR-related
# builds, therefore contributors will get notified about *most* issues
- perl: "5.8"
sudo: required
dist: precise
env:
- CLEANTEST=false
- POISON_ENV=true
- perl: "5.10"
sudo: required
dist: precise
env:
- CLEANTEST=false
- POISON_ENV=true
- perl: "5.22-extras"
sudo: required
dist: precise
env:
- CLEANTEST=false
- POISON_ENV=true
# CLEANTEST of minimum supported with non-tracing poisoning, single thread (hence the sudo)
- perl: "5.8.3_nt_mb"
sudo: required
dist: precise
env:
- VCPU_USE=1
- CLEANTEST=true
- POISON_ENV=true
- DBIC_TRACE_PROFILE=console_monochrome
- BREWVER=5.8.3
- BREWOPTS="-Dusemorebits"
# Full Test of minimum supported without threads with plain poisoned trace
- perl: "5.8.3_nt"
sudo: required
dist: precise
# run these under legacy - great simulation of low memory env
group: legacy
env:
- CLEANTEST=false
- POISON_ENV=true
- DBIC_TRACE=1
- BREWVER=5.8.3
# Full Test of minimum supported with threads with non-tracing poisoning
- perl: "5.8.5_thr"
sudo: required
dist: precise
# run these under legacy - great simulation of low memory env
group: legacy
env:
- CLEANTEST=false
- POISON_ENV=true
- DBIC_TRACE_PROFILE=console
- BREWVER=5.8.5
- BREWOPTS="-Duseithreads"
# CLEANTEST of solaris-like perl with non-tracing poisoning
- perl: "5.8.4_nt"
sudo: false
dist: precise
env:
- CLEANTEST=true
- POISON_ENV=true
- DBIC_TRACE_PROFILE=console
- BREWVER=5.8.4
# Full test: this particular perl is quite widespread, single thread
- perl: "5.8.8_thr"
sudo: required
dist: precise
group: legacy
env:
- VCPU_USE=1
- CLEANTEST=false
- BREWVER=5.8.8
- BREWOPTS="-Duseithreads"
# CLEANTEST: this is the perl suse ships, with env poisoning
- perl: "5.10.0_thr_dbg"
sudo: false
dist: precise
env:
- CLEANTEST=true
- POISON_ENV=true
- BREWVER=5.10.0
- BREWOPTS="-DDEBUGGING -Duseithreads"
# CLEANTEST: this one is in a number of debian-based LTS (test a sane CPAN.pm, single thread)
- perl: "5.14.2_thr_mb"
sudo: required
dist: precise
env:
- VCPU_USE=1
- CLEANTEST=true
- BREWVER=5.14.2
- BREWOPTS="-Duseithreads -Dusemorebits"
###
# some permutations of tracing and envvar poisoning
- perl: "5.12.3_thr"
sudo: false
dist: precise
env:
- CLEANTEST=true
- POISON_ENV=true
- DBIC_TRACE=1
- DBIC_MULTICREATE_DEBUG=1
- DBIC_STORAGE_RETRY_DEBUG=1
- DBIC_TRACE_PROFILE=console
- BREWVER=5.12.3
- BREWOPTS="-Duseithreads"
- perl: "5.16.3_thr_mb"
sudo: required
dist: precise
env:
- CLEANTEST=false
- DBIC_TRACE=1
- DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
- BREWVER=5.16.3
- BREWOPTS="-Duseithreads -Dusemorebits"
- perl: "5.18-extras"
sudo: required
# explicit new infra spec preparing for a future forced upgrade
dist: trusty
env:
- CLEANTEST=false
- POISON_ENV=true
- DBIC_TRACE=1
- DBIC_TRACE_PROFILE=console_monochrome
- DBICTEST_VIA_REPLICATED=0
- DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
# MAKE SURE TO KEEP THE FLAGS IDENTICAL TO CPERL BELOW
# allows for easier side-by-side comparison
# vcpu=1 for even more stable results
- perl: "5.24.0_thr_qm"
# explicit new infra spec preparing for a future forced upgrade
# also need to pull in a sufficiently new compiler for quadmath.h
sudo: required
dist: trusty
env:
- VCPU_USE=1
- CLEANTEST=true
- POISON_ENV=true
- MVDT=false
- BREWVER=5.24.0
- BREWOPTS="-Duseithreads -Dusequadmath"
###
# Start of the allow_failures block
# MAKE SURE TO KEEP THE FLAGS IDENTICAL TO STOCK 5.latest.comparable ABOVE
# allows for easier side-by-side comparison
# vcpu=1 for even more stable results
- perl: "cperl-5.24.0_thr_qm"
# explicit new infra spec preparing for a future forced upgrade
# also need to pull in a sufficiently new compiler for quadmath.h
sudo: required
dist: trusty
env:
- VCPU_USE=1
- CLEANTEST=true
- POISON_ENV=true
- MVDT=false
- BREWVER=cperl-5.24.0
- BREWOPTS="-Duseithreads -Dusequadmath"
- perl: "cperl-master_thr"
sudo: false
dist: precise
env:
- CLEANTEST=true
- POISON_ENV=true
- MVDT=false
- BREWVER=cperl-master
- BREWOPTS="-Duseithreads -Dusedevel"
# threaded oldest possible with blead CPAN
- perl: "devcpan_5.8.1_thr_mb"
sudo: false
dist: precise
env:
- CLEANTEST=true
- DEVREL_DEPS=true
- BREWVER=5.8.1
- BREWOPTS="-Duseithreads -Dusemorebits"
# oldest possible with blead CPAN with poisoning and plain trace
- perl: "devcpan_5.8.1"
sudo: false
dist: precise
env:
- CLEANTEST=true
- DEVREL_DEPS=true
- POISON_ENV=true
- DBIC_TRACE=1
- DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
- BREWVER=5.8.1
# 5.8.3 with blead CPAN
- perl: "devcpan_5.8.3_mb"
sudo: required
# explicit new infra spec preparing for a future forced upgrade
dist: trusty
env:
- CLEANTEST=false
- DEVREL_DEPS=true
- BREWVER=5.8.3
- BREWOPTS="-Dusemorebits"
# 5.8.7 threaded with blead CPAN with non-tracing poisoning
- perl: "devcpan_5.8.7_thr"
sudo: false
dist: precise
env:
- CLEANTEST=true
- DEVREL_DEPS=true
- POISON_ENV=true
- BREWVER=5.8.7
- BREWOPTS="-Duseithreads"
# 5.8.8 threaded MB (exercises P5#72210)
- perl: "devcpan_5.8.8_thr_mb"
sudo: false
dist: precise
env:
- CLEANTEST=true
- DBICTEST_VERSION_WARNS_INDISCRIMINATELY=1
- DEVREL_DEPS=true
- BREWVER=5.8.8
- BREWOPTS="-Duseithreads -Dusemorebits"
# 5.10.0 threaded with blead CPAN
- perl: "devcpan_5.10.0_thr_mb"
sudo: false
dist: precise
env:
- CLEANTEST=true
- DEVREL_DEPS=true
- BREWVER=5.10.0
- BREWOPTS="-Duseithreads -Dusemorebits"
# 5.12.1 with blead CPAN
- perl: "devcpan_5.12.1_thr"
sudo: false
dist: precise
env:
- CLEANTEST=true
- DEVREL_DEPS=true
- BREWVER=5.12.1
- BREWOPTS="-Duseithreads"
# bleadperl with stock CPAN, full depchain test with non-tracing poisoning, single thread
- perl: "bleadperl"
sudo: required
dist: precise
env:
- VCPU_USE=1
- CLEANTEST=true
- POISON_ENV=true
- BREWVER=blead
# bleadperl with blead CPAN, single thread
- perl: "devcpan_bleadperl_thr_mb"
sudo: required
# explicitly do not specify dist - see what the default does
env:
- VCPU_USE=1
- CLEANTEST=false
- DEVREL_DEPS=true
- BREWVER=blead
- BREWOPTS="-Duseithreads -Dusemorebits"
# CLEANTEST of http://schplog.schmorp.de/2015-06-06-a-stable-perl.html with non-tracing poisoning
- perl: "schmorp_stableperl_thr_mb"
sudo: false
dist: precise
env:
- CLEANTEST=true
- POISON_ENV=true
- BREWVER=schmorp_stableperl
- BREWOPTS="-Duseithreads -Dusemorebits"
# which ones of the above can fail
allow_failures:
# these run with various dev snapshots - allowed to fail
- perl: cperl-5.24.0_thr_qm
- perl: cperl-master_thr
- perl: devcpan_5.8.1_thr_mb
- perl: devcpan_5.8.1
- perl: devcpan_5.8.3_mb
- perl: devcpan_5.8.7_thr
- perl: devcpan_5.8.8_thr_mb
- perl: devcpan_5.10.0_thr_mb
- perl: devcpan_5.12.1_thr
- perl: bleadperl
- perl: devcpan_bleadperl_thr_mb
- perl: schmorp_stableperl_thr_mb
###
### For the following two phases -e is *set*
###
before_install:
# common functions for all run phases below
#
# this is an exporter - sourcing it is crucial
# among other things it also sets -e
#
- source maint/travis-ci_scripts/common.bash
# Sets global envvars, downloads/configures debs based on CLEANTEST
# Sets extra DBICTEST_* envvars
#
# this is an exporter - sourcing it is crucial
#
- source maint/travis-ci_scripts/10_before_install.bash
install:
# Build and switch to a custom perl if requested
# Configure the perl env, preinstall some generic toolchain parts
# Possibly poison the environment
#
# this is an exporter - sourcing it is crucial
#
- source maint/travis-ci_scripts/20_install.bash
###
### From this point on -e is *unset*, rely on travis' error handling
###
- set +e
before_script:
# Preinstall/install deps based on envvars/CLEANTEST
#
# need to invoke the after_failure script manually
# because 'after_failure' runs only after 'script' fails
#
- maint/getstatus /bin/bash maint/travis-ci_scripts/30_before_script.bash
script:
# Run actual tests
#
- maint/getstatus /bin/bash maint/travis-ci_scripts/40_script.bash
###
### Set -e back, work around https://github.com/travis-ci/travis-ci/issues/3533
###
- set -e
after_success:
# Check if we can assemble a dist properly if not in CLEANTEST
#
- maint/getstatus /bin/bash maint/travis-ci_scripts/50_after_success.bash || ( /bin/bash maint/travis-ci_scripts/50_after_failure.bash && /bin/false )
after_failure:
# Final sysinfo printout on fail
#
- maint/getstatus /bin/bash maint/travis-ci_scripts/50_after_failure.bash
after_script:
# No tasks yet
#
#- maint/getstatus /bin/bash maint/travis-ci_scripts/60_after_script.bash