Arduino Library for the MCP23008 (and '9) I2C I/O expander
C++ Java C
Pull request Compare This branch is 1 commit ahead, 6 commits behind adafruit:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Failed to load latest commit information.


To download, click "Download Source" in the top right corner. Then install as indicated in our tutorial:
in a folder called Adafruit_MCP23008.

This is very much beta, it seems to work fine but its not optimized and doesn't currently suport the interrupt capability of the chip

Currently it can do: setting pin directions, inputs and outputs and turning on/off the pull-up resistors

To use:
Connect pin #1 of the expander to Analog 5 (i2c clock)
Connect pin #2 of the expander to Analog 4 (i2c data)
Connect pins #3, 4 and 5 of the expander to ground (address selection)
Connect pin #6 and 18 of the expander to 5V (power and reset disable)
Connect pin #9 of the expander to ground (common ground)
Pins 10 thru 17 are your input/output pins

Check the datasheet for more info:

Enjoy and send pull requests!