Skip to content
This repository has been archived by the owner. It is now read-only.
bluething IoT Sensor based on ESP8266
Python
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
LICENSE
README.md
main.py
mcp9808.py

README.md

bluething-sensor

bluething IoT Sensor based on ESP8266

Requirements

This code was tested with an Adafruit Feather HUZZAH and an Adafruit MCP9808 temperature sensor but any ESP8266 board should work.

  • ESP8266 board
  • Adafruit MCP9808
  • MicroPython (tested with 1.8.6)

Running the code

Please check the variables on top in main.py because you will likely want to change a few of them.

You need to upload the python code to the board. Any method should work so you can choose between ampy, WebREPL, rshell or mpfshell. I prefer the last one so:

mpfshell
> open ttyUSB0
> put main.py
> put mcp9808.py
> exit

Connect to the serial console to see the output.

miniterm.py /dev/ttyUSB0 115200

Reset the device to run the uploaded code.

You can’t perform that action at this time.