Skip to content
Delion Masternode Auto Install Script
Branch: master
Clone or download
Latest commit 8ea73e3 Feb 26, 2019
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
README.md Create README.md Feb 26, 2019
delionsetup.sh Update delionsetup.sh Feb 26, 2019

README.md

Delion Masternode Install Script

Part 1 - Sending Collateral Coins

  1. Open your Windows wallet - MAKE SURE IT IS SYNCED WITH THE NETWORK
  2. Go to Tools -> Debug Console
  3. Type: getaccountaddress MN# (# is your masternode number you want to use. Example: MN1)
  4. Send 5000 DLN to this address
  5. Go to Tools -> Debug Console
  6. Type: masternode outputs (This can take a minute before an output is shown)
  7. Type: masternode genkey
  8. Save your TX ID (The first number) and your Index Number (Second number, either a 1 or 0)
  9. Save your generated key as well as this will be needed in your VPS as your private key
  10. Save these with a notepad
  11. Close the wallet
  12. Move to Part 2 for now

Part 2 - Getting your Linux VPS Started Up (Read all instructions and follow prompts closely)

  1. Connect to your linux vps AS ROOT, copy and paste the following line into your VPS. Double click to highlight the entire line, copy it, and right click into Putty or Shift + Insert to paste.
cd && sudo apt-get install git -y && sudo git clone https://github.com/delioncoin/masternode.git && bash masternode/delionsetup.sh
  1. follow the prompts closely and don't mess it up!
  2. Move to Part 3

Part 3 - Editing your Windows Config File

  1. Open your wallet
  2. Go to Tools -> Open Masternode Configuration File
  3. Enter the following on one single line after the example configuration <alias> <ip>:15858 <private_key> <tx_id> <index>
  4. It should look something like this: MN1 127.0.0.2:15858 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX X
  5. Save and close the file and restart your wallet.

Part 4 - Starting the Masternode

  1. In your wallet, go to Tools -> Debug Console
  2. Enter masternode start-alias <alias> with <alias> being the name of your masternode from Part 3 (after 16 confirmations)
  3. Enjoy! You can start this process over again for another MN on a fresh Linux VPS!

Part 5 - Checking Masternode Status

  1. After running the command in step 4, go back to your VPS
  2. Enter cd to get back to your root directory
  3. Enter delion-cli masternode status
  4. This will tell you the status of your masternode, any questions, Join discord for help: https://discord.gg/zsh2PZt

Recommended Tools

  • Putty - Easy to use and customizable SSH client.
  • SuperPutty - This allows you to have multiple Putty tabs open in one window, allowing you to easily organize and switch between masternode servers.
You can’t perform that action at this time.