diff --git a/content/docs/deployment/csmoperator/modules/resiliency.md b/content/docs/deployment/csmoperator/modules/resiliency.md index 421cdcef42..349e61782d 100644 --- a/content/docs/deployment/csmoperator/modules/resiliency.md +++ b/content/docs/deployment/csmoperator/modules/resiliency.md @@ -18,6 +18,14 @@ When utilizing CSM for Resiliency module, it is crucial to note that it will sol ```bash kubectl get pods -A -l podmon.dellemc.com/driver=csi-vxflexos ``` +Similarly, labels for for csi-powerscale, csi-unity, csi-powerstore and csi-powermax would be as: + ```bash + podmon.dellemc.com/driver:csi-isilon + podmon.dellemc.com/driver:csi-unity + podmon.dellemc.com/driver:csi-powerstore + podmon.dellemc.com/driver:csi-powermax +``` + ``` NAMESPACE NAME READY STATUS RESTARTS AGE pmtu1 podmontest-0 1/1 Running 0 3m7s diff --git a/content/docs/deployment/helm/modules/installation/resiliency/_index.md b/content/docs/deployment/helm/modules/installation/resiliency/_index.md index 005c23c7b8..8d8f926ce8 100644 --- a/content/docs/deployment/helm/modules/installation/resiliency/_index.md +++ b/content/docs/deployment/helm/modules/installation/resiliency/_index.md @@ -16,6 +16,8 @@ For information on the PowerScale CSI driver, see [PowerScale CSI Driver](https: For information on the PowerStore CSI driver, see [PowerStore CSI Driver](https://github.com/dell/csi-powerstore). +For information on the PowerStore CSI driver, see [PowerMax CSI Driver](https://github.com/dell/csi-powermax). + Configure all the helm chart parameters described below before installing the drivers. ## Helm Chart Installation @@ -194,6 +196,38 @@ podmon: - "--ignoreVolumelessPods=false" ``` +## PowerMax Specific Recommendations + +Here is a typical installation used for testing: + +```yaml +podmon: + enabled: false + controller: + args: + - "--csisock=unix:/var/run/csi/csi.sock" + - "--labelvalue=csi-powermax" + - "--arrayConnectivityPollRate=60" + - "--driverPath=csi-powermax.dellemc.com" + - "--mode=controller" + - "--skipArrayConnectionValidation=false" + - "--driver-config-params=/powermax-config-params/driver-config-params.yaml" + - "--driverPodLabelValue=dell-storage" + - "--ignoreVolumelessPods=false" + + node: + args: + - "--csisock=unix:/var/lib/kubelet/plugins/powermax.emc.dell.com/csi_sock" + - "--labelvalue=csi-powermax" + - "--arrayConnectivityPollRate=60" + - "--driverPath=csi-powermax.dellemc.com" + - "--mode=node" + - "--leaderelection=false" + - "--driver-config-params=/powermax-config-params/driver-config-params.yaml" + - "--driverPodLabelValue=dell-storage" + - "--ignoreVolumelessPods=false" +``` + ## Dynamic parameters CSM for Resiliency has configuration parameters that can be updated dynamically, such as the logging level and format. This can be diff --git a/content/docs/prerequisites/_index.md b/content/docs/prerequisites/_index.md index 4795ab4318..b323a3456a 100644 --- a/content/docs/prerequisites/_index.md +++ b/content/docs/prerequisites/_index.md @@ -58,7 +58,7 @@ Container Storage Modules (CSM) does not officially support specific operating s | [CSM Authorization](../authorization/) | Yes | Yes | No | Yes | No | | [CSM Observability](../observability/) | Yes | Yes | No | Yes | Yes | | [CSM Replication](../replication/) | Yes | Yes | No | Yes | Yes | -| [CSM Resiliency](../resiliency/) | No | Yes | Yes | Yes | Yes | +| [CSM Resiliency](../resiliency/) | Yes | Yes | Yes | Yes | Yes | | [CSM Encryption](../secure/encryption/)| No | No | No | Yes | No | | [CSM Application Mobility](../applicationmobility/) | Yes | Yes | Yes | Yes | Yes | | [Volume Group Snapshot](../snapshots/volume-group-snapshots/) | No | Yes | No | No | Yes | @@ -82,9 +82,9 @@ The table below lists the driver and modules versions installable with the CSM O | CSI PowerStore | 2.10.0 | ❌ | ❌ | ❌ | ✔ 1.9.0 | | CSI PowerStore | 2.9.0 | ❌ | ❌ | ❌ | ✔ 1.8.0 | | CSI PowerStore | 2.8.0 | ❌ | ❌ | ❌ | ✔ 1.7.0 | -| CSI PowerMax | 2.10.0 | ✔ 1.10.0 | ✔ 1.8.0 | ✔ 1.8.0 | ❌ | +| CSI PowerMax | 2.11.0 | ✔ 1.11.0 | ✔ 1.9.0 | ✔ 1.9.0 | ✔ 1.10.0 | +| CSI PowerMax | 2.10.1 | ✔ 1.10.1 | ✔ 1.8.1 | ✔ 1.8.1 | ❌ | | CSI PowerMax | 2.9.0 | ✔ 1.9.0 | ✔ 1.7.0 | ✔ 1.7.0 | ❌ | -| CSI PowerMax | 2.8.0 | ✔ 1.8.0 | ✔ 1.6.0 | ✔ 1.6.0 | ❌ | | CSI Unity XT | 2.10.0 | ❌ | ❌ | ❌ | ❌ | | CSI Unity XT | 2.9.0 | ❌ | ❌ | ❌ | ❌ | | CSI Unity XT | 2.8.0 | ❌ | ❌ | ❌ | ❌ | diff --git a/content/docs/resiliency/_index.md b/content/docs/resiliency/_index.md index 78fa586121..f9d86c95ab 100644 --- a/content/docs/resiliency/_index.md +++ b/content/docs/resiliency/_index.md @@ -31,9 +31,9 @@ CSM for Resiliency provides the following capabilities: {{}} | Capability | PowerScale | Unity XT | PowerStore | PowerFlex | PowerMax | | --------------------------------------- | :--------: | :------: | :--------: | :-------: | :------: | -| Detect pod failures when: Node failure, K8S Control Plane Network failure, K8S Control Plane failure, Array I/O Network failure | yes | yes | yes | yes | no | -| Cleanup pod artifacts from failed nodes | yes | yes | yes | yes | no | -| Revoke PV access from failed nodes | yes | yes | yes | yes | no | +| Detect pod failures when: Node failure, K8S Control Plane Network failure, K8S Control Plane failure, Array I/O Network failure | yes | yes | yes | yes | yes | +| Cleanup pod artifacts from failed nodes | yes | yes | yes | yes | yes | +| Revoke PV access from failed nodes | yes | yes | yes | yes | yes | {{
}} ## Supported Operating Systems/Container Orchestrator Platforms @@ -48,9 +48,9 @@ CSM for Resiliency provides the following capabilities: ## Supported Storage Platforms {{}} -| | PowerFlex | Unity XT | PowerScale | PowerStore | -| ------------- | :----------: | :-------------------------------: | :-------------------------------------: | :---------------------------: | -| Storage Array | 3.6.x, 4.0.x, 4.5 | 5.1.x, 5.2.x, 5.3.0 | OneFS 9.3, 9.4, 9.5.0.x (x >= 5) | 3.0, 3.2, 3.5, 3.6 | +| | PowerFlex | Unity XT | PowerScale | PowerStore | PowerMax | +| ------------- | :----------: | :-------------------------------: | :-------------------------------------: | :---------------------------: | :---------------------------: | +| Storage Array | 3.6.x, 4.0.x, 4.5 | 5.1.x, 5.2.x, 5.3.0 | OneFS 9.3, 9.4, 9.5.0.x (x >= 5) | 3.0, 3.2, 3.5, 3.6 | 2500/8500 PowerMax OS 10 (6079), Unisphere 10.x | {{
}} ## Supported CSI Drivers @@ -63,6 +63,7 @@ CSM for Resiliency supports the following CSI drivers and versions. | CSI Driver for Dell Unity XT | [csi-unity](https://github.com/dell/csi-unity) | v2.0.0 + | | CSI Driver for Dell PowerScale | [csi-powerscale](https://github.com/dell/csi-powerscale) | v2.3.0 + | | CSI Driver for Dell PowerStore | [csi-powerstore](https://github.com/dell/csi-powerstore) | v2.6.0 + | +| CSI Driver for Dell PowerMax | [csi-powermax](https://github.com/dell/csi-powermax) | v2.11.0 + | {{}} ### PowerFlex Support @@ -102,6 +103,14 @@ PowerStore is a highly scalable array that is very well suited to Kubernetes dep * A robust mechanism to detect if Nodes are actively doing I/O to volumes. * Low latency REST API supports fast CSI provisioning and de-provisioning operations. +### PowerMax Support + +PowerMax is the highest performing block storage array that is very well suited to Kubernetes deployments. The CSM for Resiliency support for PowerMax leverages the following PowerMax features: + +* Detection of Array I/O Network Connectivity status changes. +* A robust mechanism to detect if Nodes are actively doing I/O to volumes. +* Low latency REST API supports fast CSI provisioning and de-provisioning operations. + ## Limitations and Exclusions This file contains information on Limitations and Exclusions that users should be aware of. Additionally, there are driver specific limitations and exclusions that may be called out in the [Deploying CSM for Resiliency](../deployment/helm/modules/installation/resiliency/) page. @@ -161,10 +170,12 @@ pmtu3 podmontest-0 1/1 Running 0 3m6s CSM for Resiliency may also generate events if it is unable to clean up a pod for some reason. For example, it may not clean up a pod because the pod is still doing I/O to the array. - Similarly, the label selector for csi-powerscale and csi-unity would be as shown respectively. +Similarly, the label selector for csi-powerscale, csi-unity, csi-powerstore and csi-powermax would be as shown respectively. ```yaml labelSelector: {map[podmon.dellemc.com/driver:csi-isilon] labelSelector: {map[podmon.dellemc.com/driver:csi-unity] + labelSelector: {map[podmon.dellemc.com/driver:csi-powerstore] + labelSelector: {map[podmon.dellemc.com/driver:csi-powermax] ``` #### Important