Fetching latest commit…
Cannot retrieve the latest commit at this time
NTP SNMP subagent for Net-SNMP Installation Guides: - install net-snmp from source (configure, make;, make install) - edit the snmpd configuration file (/usr/local/share/snmp/snmpd.conf): add the lines master agentx agentXSocket tcp:localhost:705 and check which read-only community is configured (should be "rocommunity public") - start snmpd (sudo /usr/local/sbin/snmpd) and check that it is running correctly by running the command snmpwalk -v2c -c public localhost (which should output a lot of data values for the supported built-in MIBs of net-snmp) - build the libntpq and the libntp library - build the ntpsnmpd application (make) and run it (./ntpsnmpd) - now you can run snmpwalk -v2c -c public localhost enterprises.5597.99 which should give you a list of all currently supported NTP MIB objects and their current values Please note that currently I use a private MIB OID (enterprises.5597 is the Meinberg top level OEM OID and 99 is my temporary working space for this project). The final OID has to be registered with IANA and this is done by the RFC Editor when the NTPv4 MIB RFC is standardized. I will try to do this earlier in order to be able to have a working solution at the end of this project. In its current state the daemon supports these objects: ntpEntSoftwareName ntpEntSoftwareVersion ntpEntSoftwareVersionVal ntpEntSoftwareVendor ntpEntSystemType ntpEntTimeResolution ntpEntTimeResolutionVal ntpEntTimePrecision ntpEntTimePrecisionVal ntpEntTimeDistance They all use the libntpq library to access information from the ntpd instance with mode 6 packets. Next step is to implement the status section of the MIB (section 2).