Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Go to file
 
 
Cannot retrieve contributors at this time

Changelog

v1.4.2 - XX/XX/202X

  • Support for new hardware variants:
    • XBee 3 Cellular Global LTE Cat 1
    • XBee 3 Cellular North America LTE Cat 1
    • XBee 3 Cellular LTE-M/NB-IoT Low Power
    • XBee RR TH Pro/Non-Pro
  • Support to retrieve XBee statistics.
  • Send/receive explicit data in 802.15.4. (XBee 3 modules support this feature)
  • Bug fixing:
    • Fix order of nodes when creating a Zigbee source route (#278)

v1.4.1 - 12/22/2021

  • Support for new hardware variants:

    • XBee 3 Cellular LTE-M/NB-IoT (Telit)
    • XBee 3 Reduced RAM
    • S2C P5
    • XB3-DMLR
    • XB3-DMLR868
  • OTA firmware update:

  • XBee Cellular:

    • Do not work with network if the XBee does not support it (XBPL-374)
    • Fix creation of IMEI when reading cellular information.
  • Support to update a bunch of nodes at the same time (DAL-5285)

  • Documentation:

    • Add info about the force_settings parameter of open method (#241)
    • Add missing exportutils module to documentation.
  • Set exclusive access mode to the XBee serial port (#222, #252)

  • Do not stop frames reader if a serial buffer empty exception occurs (#222, #252)

  • Do not use 'os.path.join()' for relative paths of zip entries (#247)

  • Fix bad conditions when checking for a received packet (#242)

  • Fix attribute name in find neighbors debug message (#122)

  • Fix remote firmware update issue with binary file on SX devices.

  • Fix protocol change issues during firmware update operation on SX devices.

  • Do not reconfigure SP and SN values after a firmware update operation in P2MP protocol.

  • Add new method to update salt and verifier values of Bluetooth password SRP authentication.

  • Several minor bug fixes.

v1.4.0 - 03/18/2021

  • Deep node discovery for Zigbee, DigiMesh, and 802.15.4.
  • Get route from local XBee to a remote XBee:
    • New method to register a callback to listen for new received routes (add_route_received_callback())
    • New blocking method to ask for the route to the remote node (get_route_to_node())
  • Allow to recover a local node from a profile not only from firmware.
  • Support to be notified when new frames are received from a specific node (add_packet_received_from_callback()).
  • Update network information from sent/received AT Command frames.
  • New optional argument for parameter value in execute_command().
  • New optional argument to apply pending settings in get_parameter(), set_parameter(), and execute_command().
  • XBee 3:
    • Support to update remote file system OTA images.
  • XBee SX 900/868:
    • Firmware update for local and remote XBee devices.
    • Profile update for local and remote XBee devices.
  • XBee S2C:
    • OTA firmware/profile update support for remote nodes.
  • Zigbee:
    • Methods to get nodes routing and neighbor tables: get_routes() and get_neighbors().
    • Methods to get/set many-to-one broadcasting time: get_many_to_one_broadcasting_time() and set_many_to_one_broadcasting_time().
    • Support for source route creation: create_source_route().
    • New frames: * 'Route Record Indicator' (0xA1) * 'Create Source Route Packet' (0x21)
  • DigiMesh:
    • Method to get node neighbors: get_neighbors().
    • Method to build aggregate route: build_aggregate_routes().
    • New frames: * 'Route Information Packet' (0x8D)
  • Documentation update
  • Bug fixing:
    • Captured possible exception while determining the XBee role (#103)
    • Memory leak: empty list of last discovered nodes using ND (#172)
    • Fix Python 3.9 syntax error (#204)
    • Use least significant nibble of status field in local/remote AT Command Responses (XCTUNG-376)
    • Do not lose already registered socket callbacks when closing a local XBee.
    • Reload node information after firmware/profile update (XBPL-348)
    • OTA firmware update:
      • Fix sequence number in ZCL responses during fw update (XCTUNG-1975)
      • Immediate update after transferring the OTA file (XBPL-350)
      • Use requested file offset and size instead of fixed chunks (XBPL-344)
      • Mechanism to calculate the proper block size based on the maximum size received by the client and the maximum payload size (XBPL-346)
      • For asyncronous sleeping nodes (Zigbee, DigiMesh, 802.15.4) and synchronous sleeping networks (DigiMesh), configure a minimum sleep time before update and restore settings at the end. For DigiMesh synchronous sleeping network, the local XBee must be a non-sleeping node but synchronized with the network (SM=7)
    • Profile application:
      • Do not uncompress profile when reading its information. This change avoids extra processing time and required space when retrieving profile info.
      • Remove profile extracted files. A profile is opened to access to its contents, and must be closed when done with it.
      • Fixed the application of XBee profiles with 'AP' setting changes (XBPL-340)
      • Fixed bootloader update from profile due to bootloader image path mismatch (XBPL-338)
      • Fix bootloader update operation by waiting some time until the new bootloader is running (XBPL-339)
      • Fixed application of profile with filesystem from Windows(XBPL-341)
      • Read firmware version as an hexadecimal value (#177)
    • Several minor bug fixes.

v1.3.0 - 11/05/2019

  • Zigbee: Support to register joining devices to a trust center.
  • Cellular: XBee TCP/UDP socket support.
  • XBee 3:
    • Firmware update for local and remote XBee devices.
    • Profile update for local and remote XBee devices.
    • File system management for local XBee devices.
  • New recover serial connection functionality to force the XBee serial connection settings.
  • Support for notification of network cache modifications events (new node added, removed of existing node, network clear, ...)
  • Deprecate get_api_output_mode and set_api_output_mode methods to use new get_api_output_mode_value and set_api_output_mode_value with APIOutputModeBit enumeration.
  • Role as one of the cached parameters.
  • Report an error on 'finished discovery' callback if node discovery fails.
  • Several minor bug fixes.

v1.2.0 - 04/05/2019

  • Add new methods to send and receive data from other XBee interfaces through User Data Relay frames.
  • Add new methods to manage the Bluetooth interface.
  • Add support to set AT parameters without applying them with the AT Command Queue packet.
  • Improve the callbacks mechanism:
    • Callbacks are now executed in parallel.
    • Internal callbacks are now defined when needed to avoid issues when more than one callback of the same type is defined.
  • Add missing 'Transmit Status', 'Modem Status' and 'Cellular Association Indication Status' values to cover all XBee Cellular/XBee3 Cellular features.
  • Bug Fixing:
    • Fix some bugs related to package spec data.
    • Log an error when processing a wrong frame instead of stopping the reader.
    • Fix an issue parsing Explicit RX Indicator packets.
    • Fix a couple of leaks with StreamHandlers.

v1.1.1 - 04/25/2018

  • Add support for DigiMesh and 802.15.4 protocols on XBee3 modules.
  • Return an unknown XBee packet when the received packet is not supported by the library instead of raising an exception.
  • Change logging handler to log messages in the console.
  • Bug Fixing:
    • Fix a problem when closing the device connection in the reader.
    • Fix how is determined whether the module has entered in AT command mode or not.
    • Fix the string encoding and decoding in some API packets.
    • Fix the message displayed when the XBee device protocol is not correct one.

v1.1.0 - 01/19/2018

  • Add support for new hardware variants:
    • XB8X
  • Add missing 'Modem Status' values for Remote Manager connect and disconnect events.
  • Bug Fixing:
    • Fix timeouts on Unix platforms.
    • Fix the return source endpoint method from the 'ExplicitRXIndicatorPacket' class.
    • Perform general bug fixing when working in API escaped mode.

v1.0.0 - 10/02/2017

Initial release of XBee Python library. The main features of the library include:

  • Support for ZigBee, 802.15.4, DigiMesh, Point-to-Multipoint, Wi-Fi, Cellular and NB-IoT devices.
  • Support for API and API escaped operating modes.
  • Management of local (attached to the PC) and remote XBee device objects.
  • Discovery of remote XBee devices associated with the same network as the local device.
  • Configuration of local and remote XBee devices:
    • Configure common parameters with specific setters and getters.
    • Configure any other parameter with generic methods.
    • Execute AT commands.
    • Apply configuration changes.
    • Write configuration changes.
    • Reset the device.
  • Transmission of data to all the XBee devices on the network or to a specific device.
  • Reception of data from remote XBee devices:
    • Data polling.
    • Data reception callback.
  • Transmission and reception of IP and SMS messages.
  • Reception of network status changes related to the local XBee device.
  • IO lines management:
    • Configure IO lines.
    • Set IO line value.
    • Read IO line value.
    • Receive IO data samples from any remote XBee device on the network.
  • Support for explicit frames and application layer fields (Source endpoint, Destination endpoint, Profile ID, and Cluster ID).
  • Multiple examples that show how to use the available APIs.