Permalink
Fetching contributors…
Cannot retrieve contributors at this time
142 lines (115 sloc) 5.88 KB
INDEX
-----
* Boot parameters (initramfs stage)
* hooks/archiso
* hooks/archiso_pxe_common
* hooks/archiso_pxe_nbd
* hooks/archiso_pxe_http
* hooks/archiso_pxe_nfs
* hooks/archiso_loop_mnt
* Boot parameters (configs/releng)
* scripts/choose-mirror
*** Boot parameters (initramfs stage)
** hooks/archiso
* archisolabel= Set the filesystem label where archiso files reside.
Default: (unset)
* archisodevice= Set the device node where archiso medium is located.
Default: "/dev/disk/by-label/${archisolabel}"
* archisobasedir= Set the base directory where all files reside.
Default: "arch"
* copytoram= If set to "y" or just "copytoram" without arguments,
all SquashFS are copied to "RAM".
Default: (unset)
* checksum= If set to "y" or just "checksum" without arguments,
performs a self-test of all files inside ${install_dir},
and continue booting if ok.
Default: (unset)
* cow_label= Set the filesystem label where COW file (for dm-snapshot)
or upperdir/workdir files (for overlayfs) must be stored.
Default: (unset)
* cow_device= Like cow_label= but using device node.
Default: (unset) or "/dev/disk/by-label/${cow_label}"
* cow_flags= Set extra mount options, e.g. for btrfs subvolumes.
Default: defaults
* cow_directory= Set a directory inside ${cow_device}.
Default: "/persistent_${archisolabel}/${arch}"
* cow_persistent= Set if snapshot is persistent "P" or non-persistent "N".
Only used for dm-snapshot mode, ignored for overlayfs.
Default: "N" (if no ${cow_device} is used) otherwise "P".
* cow_spacesize= Set the size for COW space (tmpfs). Valid for both
dm-snapshot and overlayfs mode.
The argument is an integer and optional unit.
Units are M,G (powers of 1024).
Default: "256M"
* cow_chunksize= Set chunksize used for dm-snapshot. This is number
of 512 byte blocks to write at once.
Default: "8"
* copytoram_size= Set the size of tmpfs. This space is used for
airootfs.sfs image if copytoram=y.
Size is in bytes (suffix with "k", "m" and "g") or
in percentage of available RAM.
Default: "75%"
* dm_snap_prefix= Set a prefix for dm-snapshot node names.
Only used for dm-snapshot mode, ignored for overlayfs.
Default: "arch"
* arch= Force an architecture type (i686 | x86_64).
Do not set it for normal operations.
Default: (architecture of running kernel)
** hooks/archiso_pxe_common
* ip= This parameter is setup automatically by PXELINUX
when option "SYSAPPEND" is set to 1 or 2 in config.
ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask>
Default: (set via PXE server)
* BOOTIF= This parameter is setup automatically by PXELINUX
when option "SYSAPPEND" is set to 2 or 3 in config.
BOOTIF=<hardware-address-of-boot-interface>
Default: (set via PXELINUX)
* copy_resolvconf= Copy /etc/resolv.conf from initramfs to live-enviroment.
Set to "n" to skip them.
Default: "y"
** hooks/archiso_pxe_nbd
* archiso_nbd_name= Set NBD export name used by the server.
Default: archiso
* archiso_nbd_srv= Set an IP address where NBD reside.
If ${pxeserver} is used, PXE IP will be used.
Default: (unset)
** hooks/archiso_pxe_http
* archiso_http_srv= Set an HTTP URL (must end with /) where ${archisobasedir}
is found with all *.sfs files.
In the IP/domain part if ${pxeserver} is used, use PXE IP.
Default: (unset)
* archiso_http_spc= Set the size of tmpfs where *.sfs files are downloaded.
Default: "75%"
** hooks/archiso_pxe_nfs
* archiso_nfs_srv= Set the NFS-IP:/path of the server
In the IP part if ${pxeserver} is used, PXE IP will be used.
Default: (unset)
* archiso_nfs_opt= Set NFS mount options separated by comma.
Default: (unset, see below)
These are the implicit options:
port = as given by server portmap daemon
rsize = 1024
wsize = 1024
timeo = 7
retrans = 3
acregmin = 3
acregmax = 60
acdirmin = 30
acdirmax = 60
flags = hard, nointr, noposix, cto, ac
** hooks/archiso_loop_mnt
* img_label= Set the filesystem label where archiso-image.iso.
Default: (unset)
* img_dev= Device where archiso-image.iso reside.
Default: (unset) or "/dev/disk/by-label/${img_label}"
* img_flags= Set extra mount options, e.g. for btrfs subvolumes.
Default: defaults
* img_loop= Full path where archiso-image.iso is located on ${img_dev}
Default: (unset)
*** Boot parameters (configs/releng)
** scripts/choose-mirror
* mirror= Takes a mirror URL and creates a new mirrorlist.
When setting mirror=auto, the mirror is taken from
archiso_http_srv= in order to keep using the mirror
selected in the netboot menu.
Default: (unset)