Permalink
Fetching contributors…
Cannot retrieve contributors at this time
265 lines (229 sloc) 7.97 KB
# Copyright (c) 2010 Zmanda, Inc. All Rights Reserved.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 as published
# by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
use Test::More tests => 11;
use strict;
use warnings;
use lib "@amperldir@";
use File::Path;
use Data::Dumper;
use Installcheck;
use Installcheck::Dumpcache;
use Installcheck::Config;
use Installcheck::Mock;
use Installcheck::Run qw(run run_err run_get $diskname);
use Amanda::DB::Catalog;
use Amanda::Paths;
use Amanda::Config qw( :init );
use Amanda::Changer;
use Amanda::Debug;
Amanda::Debug::dbopen("installcheck");
my $vtape_root = "$Installcheck::TMP/tertiary";
sub setup_chg_disk {
rmtree $vtape_root if -d $vtape_root;
mkpath "$vtape_root/slot1";
return "chg-disk:$vtape_root";
}
# set up a basic dump
Installcheck::Dumpcache::load("basic");
config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
my ($cfgerr_level, @cfgerr_errors) = config_errors();
if ($cfgerr_level >= $CFGERR_WARNINGS) {
config_print_errors();
die "config errors";
}
# and then set up a new vtape to vault onto
my $tertiary_chg = setup_chg_disk();
# try a few failures first
like(run_err("$sbindir/amvault",
'--autolabel=any',
'--label-template', "TESTCONF%%",
'--src-timestamp', 'latest',
'--dst-changer', $tertiary_chg,
'TESTCONF', 'someotherhost'),
qr/No dumps to vault/,
"amvault with a non-matching dumpspec dumps nothing")
or diag($Installcheck::Run::stderr);
like(run_err("$sbindir/amvault",
'--autolabel=any',
'--label-template', "TESTCONF%%",
'--src-timestamp', 'latest',
'--fulls-only',
'--dst-changer', $tertiary_chg,
'TESTCONF', '*', '*', '*', '1-3'),
qr/No dumps to vault/,
"amvault with --fulls-only but specifying non-full dumpspecs dumps nothing")
or diag($Installcheck::Run::stderr);
like(run_err("$sbindir/amvault",
'--autolabel=any',
'--label-template', "TESTCONF%%",
'--dst-changer', $tertiary_chg,
'TESTCONF'),
qr/specify something to select/,
"amvault without any limiting factors is an error"),
or diag($Installcheck::Run::stderr);
# now a successful vaulting
ok(run("$sbindir/amvault",
'--autolabel=any',
'--label-template', "TESTCONF%%",
'--src-timestamp', 'latest',
'--dst-changer', $tertiary_chg,
'TESTCONF'),
"amvault runs!")
or diag($Installcheck::Run::stderr);
my @tert_files = glob("$vtape_root/slot1/0*");
ok(@tert_files > 0,
"..and files appear on the tertiary volume!");
my @dumps = Amanda::DB::Catalog::sort_dumps([ 'write_timestamp' ],
Amanda::DB::Catalog::get_dumps());
is(scalar @dumps, 2,
"now there are two dumps in the catalog");
sub summarize {
my ($dump) = @_;
return {
map { $_ => $dump->{$_} }
qw(diskname hostname level dump_timestamp kb orig_kb)
};
}
is_deeply(summarize($dumps[1]), summarize($dumps[0]),
"and they match in all the right ways")
or diag(Dumper(@dumps));
# clean up the tertiary vtapes before moving on
rmtree $vtape_root;
Installcheck::Run::cleanup();
# try the multi dump, to get a better idea of the filtering possibilities
Installcheck::Dumpcache::load("multi");
config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
($cfgerr_level, @cfgerr_errors) = config_errors();
if ($cfgerr_level >= $CFGERR_WARNINGS) {
config_print_errors();
die "config errors";
}
sub get_dry_run {
my $stdout = run_get(@_);
if (!$stdout) {
diag($Installcheck::Run::stderr);
return 'run-failed';
}
my @rv;
for my $line (split /\n/, $stdout) {
next if ($line =~ /^Total Size:/);
my ($tape, $file, $host, $disk, $datestamp, $level) =
($line =~ /^(\S+) (\d*) (\S+) (.+) (\d+) (\d+)$/);
$tape = 'holding' if $file eq '';
push @rv, [$tape, $file, $host, $disk, $level]; # note: no datestamp
}
return @rv;
}
is_deeply([ get_dry_run("$sbindir/amvault",
'--dry-run',
'--autolabel=any',
'--label-template', "TESTCONF%%",
'--fulls-only',
'--dst-changer', $tertiary_chg,
'TESTCONF') ], [
[ "TESTCONF01", "1", "localhost", "$diskname/dir", "0" ],
[ "TESTCONF01", "2", "localhost", "$diskname", "0" ],
[ "TESTCONF02", "2", "localhost", "$diskname", "0" ]
], "amvault with --fulls-only only dumps fulls");
is_deeply([ get_dry_run("$sbindir/amvault",
'--dry-run',
'--autolabel=any',
'--label-template', "TESTCONF%%",
'--dst-changer', $tertiary_chg,
'TESTCONF', "localhost", "$diskname/dir") ], [
[ "holding", "", "localhost", "$diskname/dir", "1" ],
[ "TESTCONF01", "1", "localhost", "$diskname/dir", "0" ],
[ "TESTCONF02", "1", "localhost", "$diskname/dir", "1" ]
], "amvault with a disk expression dumps only that disk");
# Test NDMP-to-NDMP vaulting. This will test all manner of goodness:
# - specifying a named changer on the amvault command line
# - exporting
# - directtcp vaulting (well, not really, since we don't support connecting yet)
SKIP: {
skip "not built with ndmp and server", 2 unless
Amanda::Util::built_with_component("ndmp") and Amanda::Util::built_with_component("server");
Installcheck::Dumpcache::load("ndmp");
my $ndmp = Installcheck::Mock::NdmpServer->new(no_reset => 1);
$ndmp->edit_config();
# append a tertiary changer to the config file - it's just too hard to
# specify a full ndmp changer on the command line
my $ndmp_port = $ndmp->{'port'};
my $chg_dir = "$Installcheck::TMP/vtapes/ndmjob-tert";
my $chg_spec = "chg-ndmp:127.0.0.1:$ndmp_port\@$chg_dir";
my $drive_root = "ndmp:127.0.0.1:$ndmp_port\@$chg_dir";
-d $chg_dir && rmtree($chg_dir);
mkpath($chg_dir);
my $amanda_conf_filename = "$CONFIG_DIR/TESTCONF/amanda.conf";
open(my $fh, ">>", $amanda_conf_filename);
print $fh <<EOF;
define changer "tertiary" {
tpchanger "$chg_spec"
property "tape-device" "0=$drive_root/drive0"
property append "tape-device" "1=$drive_root/drive1"
changerfile "$chg_dir-changerfile"
}
EOF
$tertiary_chg = "tertiary";
ok(run("$sbindir/amvault",
'--export',
'--autolabel=any',
'--label-template', "TESTCONF%%",
'--src-timestamp', 'latest',
'--dst-changer', $tertiary_chg,
'TESTCONF'),
"amvault runs with an NDMP device as secondary and tertiary, with --export")
or diag($Installcheck::Run::stderr);
config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
($cfgerr_level, @cfgerr_errors) = config_errors();
if ($cfgerr_level >= $CFGERR_WARNINGS) {
config_print_errors();
die "config errors";
}
# query the tertiary changer to see where that dump ended up
my $chg = Amanda::Changer->new($tertiary_chg);
my $inventory;
my $inventory_cb = sub {
my ($err, $inv) = @_;
die "$err" if $err;
$inventory = $inv;
Amanda::MainLoop::quit();
};
Amanda::MainLoop::call_later(sub { $chg->inventory(inventory_cb => $inventory_cb); });
Amanda::MainLoop::run();
$chg->quit();
# find TESTCONF02 in the inventory, and check that it is in an i/e slot
my $notfound = "tertiary volume not found";
for my $i (@$inventory) {
if ($i->{'label'} && $i->{'label'} eq 'TESTCONF02') {
if ($i->{'import_export'}) {
$notfound = undef;
} else {
$notfound = "tertiary volume not properly exported";
}
#last;
}
}
ok(!$notfound, "tertiary volume exists and was properly exported");
if ($notfound) {
diag($notfound);
diag("amvault stderr:");
diag($Installcheck::Run::stderr);
}
}
# clean up
Installcheck::Run::cleanup();