Skip to content


Subversion checkout URL

You can clone with
Download ZIP
Python-based continuous integration testing framework; send pull requests for your patches!

Fetching latest commit…

Cannot retrieve the latest commit at this time

Failed to load latest commit information.


BuildBot: build/test automation
  Brian Warner <warner-buildbot @ lothar . com>


The BuildBot is a system to automate the compile/test cycle required by most
software projects to validate code changes. By automatically rebuilding and
testing the tree each time something has changed, build problems are
pinpointed quickly, before other developers are inconvenienced by the
failure. The guilty developer can be identified and harassed without human
intervention. By running the builds on a variety of platforms, developers
who do not have the facilities to test their changes everywhere before
checkin will at least know shortly afterwards whether they have broken the
build or not. Warning counts, lint checks, image size, compile time, and
other build parameters can be tracked over time, are more visible, and
are therefore easier to improve.

The overall goal is to reduce tree breakage and provide a platform to run
tests or code-quality checks that are too annoying or pedantic for any human
to waste their time with. Developers get immediate (and potentially public)
feedback about their changes, encouraging them to be more careful about
testing before checkin.


 * run builds on a variety of slave platforms
 * arbitrary build process: handles projects using C, Python, whatever
 * minimal host requirements: python and Twisted
 * slaves can be behind a firewall if they can still do checkout
 * status delivery through web page, email, IRC, other protocols
 * track builds in progress, provide estimated completion time
 * flexible configuration by subclassing generic build process classes
 * debug tools to force a new build, submit fake Changes, query slave status
 * released under the GPL


The PyCon paper has a good description of the overall architecture. It is
available in HTML form in docs/PyCon-2003/buildbot.html, or on the web page.

docs/ contains the beginnings of the User's Manual, and the
Installation chapter is the best guide to use for setup instructions. The
.texinfo source can also be turned into printed documentation.



   Buildbot requires python-2.2 or later, and is primarily developed against
   python-2.3. The buildmaster uses generators, a feature which is not
   available in python-2.1, and both master and slave require a version of
   Twisted which only works with python-2.2 or later. Certain features (like
   the inclusion of build logs in status emails) require python-2.2.2 or
   later, while the IRC 'force' command requires python-2.3 .


   Both the buildmaster and the buildslaves require Twisted-1.3.0 or later.
   It has been mainly developed against Twisted-2.0.1, but has been tested
   against Twisted-2.1.0 (the most recent as this time), and might even work
   on versions as old as Twisted-1.1.0, but as always the most recent version
   is recommended.

   When using the split subpackages of Twisted-2.x.x, you'll need at least
   "Twisted" (the core package), and you'll also want TwistedMail,
   TwistedWeb, and TwistedWords (for sending email, serving a web status
   page, and delivering build status via IRC, respectively).


   If your buildmaster uses FreshCVSSource to receive change notification
   from a cvstoys daemon, it will require CVSToys be installed (tested with
   CVSToys-1.0.10). If the it doesn't use that source (i.e. if you only use
   a mail-parsing change source, or the SVN notification script), you will
   not need CVSToys.


Please read the User's Manual in docs/ (or in HTML form on the
buildbot web site) for complete instructions. This file only contains a brief


If you would like to run the unit test suite, use a command like this:

 PYTHONPATH=. trial -v buildbot.test

This should run up to 175 tests, depending upon what VC tools you have
installed. On my desktop machine it takes about four minutes to complete.
Nothing should fail, a few might be skipped. If any of the tests fail, you
should stop and investigate the cause before continuing the installation
process, as it will probably be easier to track down the bug early.


The first step is to install the python libraries. This package uses the
standard 'distutils' module, so installing them is usually a matter of
doing something like:

 python ./ install

To test this, shift to a different directory (like /tmp), and run:

 pydoc buildbot

If it shows you a brief description of the package and its contents, the
install went ok. If it says "no Python documentation found for 'buildbot'",
then something went wrong.


If you want to run a build slave, you need to obtain the following pieces of
information from the administrator of the buildmaster you intend to connect

 your buildslave's name
 the password assigned to your buildslave
 the hostname and port number of the buildmaster, i.e.
You also need to pick a working directory for the buildslave. All commands
will be run inside this directory.

Now run the 'buildbot' command as follows:


This will create a file called "buildbot.tac", which bundles up all the state
needed by the build slave application. Twisted has a tool called "twistd"
which knows how to load these saved applications and start running them.
twistd takes care of logging and daemonization (running the program in the
background). /usr/bin/buildbot is a front end which runs twistd for you.

Once you've set up the directory with the .tac file, you start it running
like this:

 buildbot start WORKDIR

This will start the build slave in the background and finish, so you don't
need to put it in the background yourself with "&". The process ID of the
background task is written to a file called "", and all output from
the program is written to a log file named "twistd.log". Look in twistd.log
to make sure the buildslave has started.

To shut down the build slave, use:

 buildbot stop WORKDIR


Some network environments will not properly maintain a TCP connection that
appears to be idle. NAT boxes which do some form of connection tracking may
drop the port mapping if it looks like the TCP session has been idle for too
long. The buildslave attempts to turn on TCP "keepalives" (supported by
Twisted 1.0.6 and later), and if these cannot be activated, it uses
application level keepalives (which send a dummy message to the build master
on a periodic basis). The TCP keepalive is typically sent at intervals of
about 2 hours, and is configurable through the kernel. The application-level
keepalive defaults to running once every 10 minutes.

To manually turn on application-level keepalives, or to set them to use some
other interval, add "--keepalive NNN" to the 'buildbot slave' command line.
NNN is the number of seconds between keepalives. Use as large a value as your
NAT box allows to reduce the amount of unnecessary traffic on the wire. 600
seconds (10 minutes) is a reasonable value.


Please read the user's manual for instructions. The short form is that you
use 'buildbot master MASTERDIR' to create the base directory, then you edit
the 'master.cfg' file to configure the buildmaster. Once this is ready, you
use 'buildbot START MASTERDIR' to launch it.

A sample configuration file will be created for you in WORKDIR/master.cfg .
There are more examples in docs/examples/, and plenty of documentation in the
user's manual. Everything is controlled by the config file.


 Please send questions, bugs, patches, etc, to the buildbot-devel mailing
 list reachable through, so that everyone
 can see them.
Something went wrong with that request. Please try again.