Skip to content
Permalink
master
Switch branches/tags

Huawei_FatAP_Grafana/mibs/HUAWEI-VLAN-MIB.mib

Go to file
 
 
Cannot retrieve contributors at this time
5036 lines (4621 sloc) 198 KB
Raw Blame
-- ============================================================================
-- Copyright (C) 2015 by HUAWEI TECHNOLOGIES. All rights reserved.
-- Description: The mib is used for configuring the information of the VLAN, including
-- VLAN management, VLAN interface, VLAN aggregation and so on.
-- Reference:
-- Version: V3.83
--
-- ============================================================================
HUAWEI-VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwFrameIndex, hwSlotIndex, hwConfigChangeIP
FROM HUAWEI-DEVICE-MIB
huaweiMgmt
FROM HUAWEI-MIB
ifIndex
FROM IF-MIB
TimeTicks, IpAddress, Integer32, Unsigned32, Counter64,OBJECT-TYPE,
MODULE-IDENTITY, OBJECT-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
TruthValue, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
hwVlan MODULE-IDENTITY
LAST-UPDATED "201508071000Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: http://www.huawei.com
Email: support@huawei.com
"
DESCRIPTION
"The mib is used for configuring the information of the VLAN, including
VLAN management,VLAN interface,VLAN aggregation and so on."
-- Revision history
REVISION "201508071000Z"
DESCRIPTION "V3.83, modified the value range and description of hwIPv6MTU."
REVISION "201504130000Z"
DESCRIPTION "V3.82, modify the description of hwUpFlowAccountByte, hwDownFlowAccountByte, hwUpFlowAccountPacket, hwDownFlowAccountPacket,
hwUpStreamPacket, hwDownStreamPacket, hwUpFlowAccountDiscardPacket, hwDownFlowAccountDiscardPacket."
REVISION "201501221000Z"
DESCRIPTION "V3.81, Added hwCableIPv6SourceVerify in hwVlanSrvProfTable."
REVISION "201412241000Z"
DESCRIPTION "V3.80, Added hwMethNativeVlan in hwVlanMngObject."
REVISION "201412231000Z"
DESCRIPTION "V3.79, modified the description of hwRegionPVCRowStatus, hwProfileRowStatus, hwVlanConnectRowStatus and hwDocsSrvVlanRowStatus."
REVISION "201411241000Z"
DESCRIPTION "V3.78, modified the description of hwVlanMethL2Forward."
REVISION "201411131000Z"
DESCRIPTION "V3.77, Added hwVlanMethL2Forward in hwVlanSrvProfTable."
REVISION "201409261000Z"
DESCRIPTION "V3.76, Added hwRouterRedirectReverse in hwVlanSrvProfTable and.
modified the description of hwVlanInterfaceLinkStatus."
REVISION "201408301000Z"
DESCRIPTION "V3.75, modified the value range and description of hwVlanIndex."
REVISION "201408151000Z"
DESCRIPTION "V3.74, modified the description of hwVlanifUpTrap and hwVlanifDownTrap."
REVISION "201407201000Z"
DESCRIPTION "V3.73, added hwIPv4MTU."
REVISION "201406231000Z"
DESCRIPTION "V3.72, modified the option of hwUserBridging, hwDhcpMode and hwDhcpv6Mode.
added hwIpv4ArpUnicastSwitch, hwIpv4ArpUnicastunkonwnpolicy,
hwIpv6NsUnicastSwitch and hwIpv6NsUnicastunkonwnpolicy in hwVlanSrvProfTable."
REVISION "201405081000Z"
DESCRIPTION "V3.71, Added hwIgmpUserMaxVlanTag in hwVlanSrvProfTable."
REVISION "201404221000Z"
DESCRIPTION "V3.70, modified the value range of hwStackingVlanInnerEthernetType."
REVISION "201401151000Z"
DESCRIPTION "V3.69, modified the description of leaves."
REVISION "201312131000Z"
DESCRIPTION "V3.68, Added hwVlanAggregationSubVlanNdProxyStatus in hwVlanAggregationTable."
REVISION "201310291000Z"
DESCRIPTION "V3.67, added layer3option16 option to hwDhcpv6Mode.
Added hwRipngTunnelSwitch in hwVlanSrvProfTable."
REVISION "201308021000Z"
DESCRIPTION "V3.66, added hwVOIPDhcpQosTable.
Added hwVOIPIPAddressSrc in hwVOIPAddressTable.
Added hwVOIPQosIPAddressSrc in hwVOIPQosTable."
REVISION "201309141000Z"
DESCRIPTION "V3.65, modified hwVlanDescription to hwVlanName.
modified hwVlanDescriptionChangeInfoTrap to hwVlanNameChangeInfoTrap.
added hwCableSourceVerify."
REVISION "201302011000Z"
DESCRIPTION "V3.64, added hwDocsSrvVlanIDTable."
REVISION "201301181000Z"
DESCRIPTION "V3.63, modified the description of hwVOIPAddressIndex in hwVOIPAddressTable."
REVISION "201211131000Z"
DESCRIPTION "V3.62, added hwDocsDefaultSrvVlanID."
REVISION "201210291000Z"
DESCRIPTION "V3.61, modified hwVlanName to hwVlanDescription.
modified hwVlanNameChangeInfoTrap to hwVlanDescriptionChangeInfoTrap."
REVISION "201208131000Z"
DESCRIPTION "V3.60, modified the description of some leaves in hwVlanSrvProfTable."
REVISION "201206151000Z"
DESCRIPTION "V3.59, added hwPolicyMulticastFabric.
modified the description of hwVlanAndVlanSrvProfOperInfoTrap."
REVISION "201203070000Z"
DESCRIPTION "V3.58, added hwIPv6MTU."
REVISION "201201301000Z"
DESCRIPTION "V3.57, added hwVlanAddInfoTrap, hwVlanDelInfoTrap, hwVlanAttrChangedInfoTrap and hwPortVlanChangedInfoTrap."
REVISION "201109210000Z"
DESCRIPTION "V3.56, added hwDoubleTagTunnelConfig.
added hwDoubleTagTunnelIgmp, hwDoubleTagTunnelRip and hwDoubleTagTunnelDhcp in hwDoubleTagTunnelConfig."
REVISION "201107151000Z"
DESCRIPTION "V3.55, added hwVlanConnectTable.
added hwVlanTrafficSuppressUnknowncastNetwork in hwVlanMIBTable.
added hwDhcpRelayInterfaceRelayAgentSwitch in hwVlanSrvProfTable."
REVISION "201104011000Z"
DESCRIPTION " V3.54, Add hwVOIPAddressObtainMode and hwVOIPPPPOEClientName based on V3.52"
REVISION "201103251000Z"
DESCRIPTION " V3.53, Add hwVOIPAddressObtainMode, hwVOIPPPPOEClientName."
REVISION "201102111000Z"
DESCRIPTION "V3.52, modified the description of hwVlanNameChangeInfoTrap, hwVlanSrvProfOperType, hwVlanForwardingModeInfoTrap."
REVISION "201101241000Z"
DESCRIPTION "V3.51, added hwVmacIPoESubStatus, hwVmacPPPoESubStatus, hwVmacPPPoASubStatus, hwPPPoAMacMode,
hwAntiIpv6SpoofingSwitch, hwIpv6DadProxySwitch, hwIpv6BindRouteAndNdSwitch,
hwIpv6NsReplySwitch, hwIpv4ArpReplySwitch.
"
REVISION "201012130000Z"
DESCRIPTION "V3.50, added hwVlanBindRaioProfileName."
REVISION "201011241000Z"
DESCRIPTION "V3.49, added hwDhcpv6Mode, hwDhcpv6OptionSwitch, and modify the description of leaves.
Modified the description of hwVlanType, hwVlanMacFilter, hwifSVLANVlanListTable, hwRegionVLanTable,
hwSmartVLanTable, hwMuxVlanEnable, hwMuxVlanPortConfTable, hwMuxVlanSlotConfTable, hwMultiVLanTable, hwVlanUpCarTable,
hwVlanDownCarTable, hwVlanParaTable, hwLocalVlanTable, hwVlanIpAwareTable, hwMplsVlanTable.
"
REVISION "201011191000Z"
DESCRIPTION "V3.48, modified the description of hwifSVLANVlanListTable, hwifPVLANMappingTable, hwRegionVLanTable,
hwSmartVLanTable, hwMuxVlanPortConfTable, hwMuxVlanSlotConfTable, hwMultiVLanTable, hwVlanUpCarTable,
hwVlanDownCarTable, hwVlanParaTable, hwLocalVlanTable, hwVlanIpAwareTable, hwMplsVlanTable, hwVlanType,
hwVlanStatus, hwVlanAttrib.
"
REVISION "201007031000Z"
DESCRIPTION "V3.47, added hwMplsVlanTable in hwVlanMngObject.
Modified the description of hwVlanList,hwVlanSrvProfOperType,hwVlanNameChangeInfoTrap,
hwVlanForwardingModeInfoTrap,hwVlanSrvProfChageInfoTrap and hwVlanAndVlanSrvProfOperInfoTrap.
"
REVISION "201006211000Z"
DESCRIPTION "V3.46, added OBJECT-TYPE node for notification including hwVlanList and hwVlanSrvProfOperType.
Added NOTIFICATION-TYPE node including hwVlanNameChangeInfoTrap,hwVlanForwardingModeInfoTrap,
hwVlanSrvProfChageInfoTrap and hwVlanAndVlanSrvProfOperInfoTrap."
REVISION "201006201000Z"
DESCRIPTION "V3.45, modified the index of hwVlanTrafficOccupiedTable from hwVlanIndex to hwVlanIndex and hwInnerVlanID."
REVISION "201006101000Z"
DESCRIPTION "V3.44, deleted the Chinese characters in this file."
REVISION "201006071000Z"
DESCRIPTION "V3.43, added hwVlanIfDHCPSStatus in hwVlanInterfaceEntry"
REVISION "201005181000Z"
DESCRIPTION "V3.42, added notConfig option to hwPPPoEMacMode, hwVmacStatus, hwRipTunnelSwitch, hwVtpCdpTunnelSwitch,
hwBpduTunnelSwitch, hwForwardingMode, hwPolicyBroadcast, hwPolicyMulticast, hwPolicyUnknowncast, hwAntiMacSpoofingSwitch."
REVISION "201004261000Z"
DESCRIPTION "V3.41, modified the description of leaves."
REVISION "201003221000Z"
DESCRIPTION "V3.40, added hwOspfTunnelSwitch, hwL3ProtocolTunnelSwitch, and modify the description of leaves."
REVISION "201003181000Z"
DESCRIPTION "V3.39, added hwFabricMacLearningSwitch"
REVISION "201002111000Z"
DESCRIPTION "V3.38, modified format of this file"
REVISION "201001251000Z"
DESCRIPTION "V3.37, added hwVmacAgingMode"
REVISION "201001111000Z"
DESCRIPTION "V3.36, modified the datatype definition,description of objects.
Integrated the huawei-VlanFluxStatistic-mib.mib and HUAWEI-VLAN-MIB.mib into HUAWEI-VLAN-MIB.mib"
REVISION "201001081000Z"
DESCRIPTION "V3.35, added hwVlanIpAwareSrcIPMode, and hwVlanIpAwareArpSendPeriod"
REVISION "200912030000Z"
DESCRIPTION "V3.34, added hwVlanIfDhcpClientOption60"
REVISION "200911160000Z"
DESCRIPTION "V3.33, added hwVlanIpAwareTable, hwIpAwareVirtualIPTable, and hwIpAwareRouteTable"
REVISION "200902200000Z"
DESCRIPTION "V3.23, added hwDot1adTpid, and hwPortOuterEthernetTypeTable"
REVISION "200712200000Z"
DESCRIPTION "V3.13, added hwVlanForwarding, hwVlanPolicyBroadcast, and hwVlanPolicyUnknowncast in hwVlanMIBTable."
REVISION "200704230000Z"
DESCRIPTION "V1.02, integrated HUAWEI-PACKET-TUNNEL-MIB.mib,
HUAWEI-VLAN-IF-MIB.mib,HUAWEI-VMIF-MIB.mib and HUAWEI-VLAN-MIB.mib into HUAWEI-VLAN-MIB.mib"
REVISION "200512130000Z"
DESCRIPTION "V1.00, first draft."
::= { huaweiMgmt 6 }
VlanIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value used to index per-VLAN tables: values of 0 and
4095 are not permitted; if the value is between 1 and
4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
global scope within a given bridged domain (see VlanId
textual convention). If the value is greater than 4095
then it represents a VLAN with scope local to the
particular agent, i.e. one without a global VLAN-ID
assigned to it. Such VLANs are outside the scope of
IEEE 802.1Q but it is convenient to be able to manage them
in the same way using this MIB."
SYNTAX Unsigned32
SnmpAdminString ::= TEXTUAL-CONVENTION
DISPLAY-HINT
"255a"
STATUS current
DESCRIPTION
"An octet string containing administrative
information, preferably in human-readable form.
To facilitate internationalization, this
information is represented using the ISO/IEC
IS 10646-1 character set, encoded as an octet
string using the UTF-8 transformation format
described in [RFC2279].
Since additional code points are added by
amendments to the 10646 standard from time
to time, implementations must be prepared to
encounter any code point from 0x00000000 to
0x7fffffff. Byte sequences that do not
correspond to the valid UTF-8 encoding of a
code point or are outside this range are
prohibited.
The use of control codes should be avoided.
When it is necessary to represent a newline,
the control code sequence CR LF should be used.
The use of leading or trailing white space should
be avoided.
For code points not directly supported by user
interface hardware or software, an alternative
means of entry and display, such as hexadecimal,
may be provided.
For information encoded in 7-bit US-ASCII,
the UTF-8 encoding is identical to the
US-ASCII encoding.
UTF-8 may require multiple bytes to represent a
single character / code point; thus the length
of this object in octets may be different from
the number of characters encoded. Similarly,
size constraints refer to the number of encoded
octets, not the number of characters represented
by an encoding.
Note that when this TC is used for an object that
is used or envisioned to be used as an index, then
a SIZE restriction MUST be specified so that the
number of sub-identifiers for any object instance
does not exceed the limit of 128, as defined by
[RFC1905].
Note that the size of an SnmpAdminString object is
measured in octets, not characters.
"
SYNTAX OCTET STRING (SIZE (0..255))
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING
hwVlanMngObject OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Vlan Object
"
::= { hwVlan 1 }
hwVlanMIBTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanMIBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the VLAN basic attributes, used for managing a VLAN, including creating,
modifying, querying, and deleting a VLAN, and configuring standard ports of a VLAN.
The index of this table is hwVlanIndex.
"
::= { hwVlanMngObject 1 }
hwVlanMIBEntry OBJECT-TYPE
SYNTAX HwVlanMIBEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the VLAN basic attributes, used for managing a VLAN, including creating,
modifying, querying, and deleting a VLAN, and configuring standard ports of a VLAN.
The index of this entry is hwVlanIndex.
"
INDEX { hwVlanIndex }
::= { hwVlanMIBTable 1 }
HwVlanMIBEntry ::=
SEQUENCE {
hwVlanIndex
VlanIndex,
hwVlanName
OCTET STRING,
hwVlanPorts
PortList,
hwVlanType
INTEGER,
hwVlanMacFilter
TruthValue,
hwVlanMcastUnknownProtos
TruthValue,
hwExistInterface
TruthValue,
hwVlanInterfaceIndex
Integer32,
hwVlanMacLearn
TruthValue,
hwVlanStatus
INTEGER,
hwVlanCreationTime
TimeTicks,
hwVlanPriority
Integer32,
hwVlanRowStatus
RowStatus,
hwVlanAttrib
INTEGER,
hwVlanSuperID
Integer32,
hwVlanForwarding
INTEGER,
hwVlanPolicyBroadcast
INTEGER,
hwVlanPolicyMulticast
INTEGER,
hwVlanPolicyUnknowncast
INTEGER,
hwVlanOuterTpid
Unsigned32,
hwVlanBindSrvProfName
OCTET STRING,
hwVlanChangeEnable
INTEGER,
hwVlanBindRaioProfileName
OCTET STRING,
hwVlanTrafficSuppressUnknowncastNetwork
Integer32,
hwVlanMethL2Forward
INTEGER
}
hwVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the VLAN ID.
Range: 1-4093.
VLAN 1 is the native VLAN.
It cannot be deleted, but its attributes can be modified.
"
::= { hwVlanMIBEntry 1 }
hwVlanName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN tag. Identifying the VLAN is like naming the VLAN, which facilitates management.
Range: a string of 0-32 characters
Default: null character string
"
::= { hwVlanMIBEntry 2 }
hwVlanPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the list of the standard ports in the VLAN.
If the VLAN contains a port, the corresponding bit of the port is set to 1.
The value of hwVlanPorts is an octet string.
One bit in each octet indicates one port,
so the octet string can indicate eight ports.
When a bit is set to 0, it indicates that the
corresponding port does not belong to this VLAN.
When a bit is set to 1, it indicates that the corresponding
port belongs to this VLAN. The order is as follows: The maximum number
of ports in a slot is 64, so the ports need to occupy eight octets.
The order, from left to right, is presented as eight groups, 0-7, 8-15,
16-23, 24-31, 32-39, 40-47, 48-55, and 56-63. In each octet,
the port IDs in ascending order are presented from low bit to high bit.
For example, ports 0/11/2 and 0/11/3 need to added to VLAN 2.
The values of hwVlanPorts of the upstream ports
(ports 0/11/2 and 0/11/3) to be added is calculated as follows:
For ports 0-7 in slot 11, their corresponding character string
positions are 76543210, and after ports 0/11/2 and 0/11/3 are added,
the bitmap is 00001100 00000000 00000000 00000000,
and the string is 0c 00 00 00 00 00 00 00.
Assuming that the other slots do not have any port that is added to the VLAN,
the character string of each of these slots is 0x0000000000000000.
According to the ascending order of slot from left to right,
the character strings of ports 0/11/2 and 0/11/3 are as follows:
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0c00000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
"
::= { hwVlanMIBEntry 3 }
hwVlanType OBJECT-TYPE
SYNTAX INTEGER
{
superVlan(1),
commonVlan(2),
subVlan(3),
primaryVlan(4),
secondaryVlan(5),
regionVlan(6),
smartVlan(7),
muxVlan(8),
multiVlan(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN type.
Options:
1. superVlan(1) -indicates super VLAN.
2. commonVlan(2) -indicates common VLAN.
3. subVlan(3) -indicates sub VLAN, the value is not supported.
4. primaryVlan(4) -indicates primary VLAN, the value is not supported.
5. secondaryVlan(5) -indicates secondary VLAN, the value is not supported.
6. regionVlan(6) -indicates region VLAN, the value is not supported.
7. smartVlan(7) -indicates smart VLAN.
8. muxVlan(8) -indicates MUX VLAN.
9. multiVlan(9) -indicates multi VLAN.
VLAN 1 supports the modify operation on hwVlanType.
For other VLANs, during the creation of a VLAN, hwVlanType must be specified.
"
::= { hwVlanMIBEntry 4 }
hwVlanMacFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag indicates whether to use mac filter.
1. true(1): use mac filter
2. false(2): not use mac filter
"
::= { hwVlanMIBEntry 5 }
hwVlanMcastUnknownProtos OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"multicast unknown protocals flag in the VLAN field
"
::= { hwVlanMIBEntry 6 }
hwExistInterface OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual interface used by VLAN
"
::= { hwVlanMIBEntry 7 }
hwVlanInterfaceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the VLAN interface.
"
::= { hwVlanMIBEntry 8 }
hwVlanMacLearn OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag indicates whether to open mac learning.
"
::= { hwVlanMIBEntry 9 }
hwVlanStatus OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
permanent(2),
dynamicGvrp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of VLAN.
Options:
1. other(1) -The following enumerated values is not supported.
2. permanent(2) -The following enumerated values is not supported.
3. dynamicGvrp(3) -The following enumerated values is not supported.
"
::= { hwVlanMIBEntry 10 }
hwVlanCreationTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time of creating VLAN.
"
::= { hwVlanMIBEntry 11 }
hwVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7 | 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the 802.1p priority of a VLAN.
Range: 0-7, 255
The larger the value, the higher the priority.
If the query operation is performed before hwVlanPriority is configured,
the query result is 255, which is invalid.
The meaning of each value is as follows:
best-effort: Best-effort priority(0)
background: Background priority(1)
spare: Spare priority(2)
excellent-effort: Excellent-effort priority(3)
controlled-load: Controlled-load priority(4)
video: Video priority(5)
voice: Voice priority(6)
network-management: Network-management priority(7)
"
DEFVAL { 255 }
::= { hwVlanMIBEntry 12 }
hwVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status, used for creating or deleting a VLAN.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a VLAN, you must specify hwVlanType and set
hwVlanRowStatus to createAndGo(4) to perform the set operation.
Other attributes of the VLAN are optional. However,
hwVlanPorts cannot be configured at the same time.
To delete a VLAN, set hwVlanRowStatus to destroy(6) to perform the set operation.
During query, the value of this leaf is the fixed active(1).
"
::= { hwVlanMIBEntry 13 }
hwVlanAttrib OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
qinq(2),
stacking(3),
subVlan(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN attribute. The following enumerated values are supported:
Options:
1. common(1) -indicates common VLAN.
2. qinq(2) -indicates QinQ VLAN.
3. stacking(3) -indicates stacking VLAN.
4. subVlan(4) -indicates sub VLAN.
During the creation of a VLAN, if this leaf is not specified, common(1)
is adopted by default. You can perform the set operation on this
leaf to modify the VLAN attribute.
The value of hwVlanAttrib must not be subvlan(4).
The value can be subvlan(4) only in the read operation. Adding a VLAN to
or deleting a VLAN from a super VLAN must be performed through hwVlanAggregationTable.
"
DEFVAL { 1 }
::= { hwVlanMIBEntry 14 }
hwVlanSuperID OBJECT-TYPE
SYNTAX Integer32 (-1 | 2..4093)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the super VLAN corresponding to the sub VLAN.
Range: -1, 2-4093
This leaf is read-only. When the VLAN is not a sub VLAN, -1 is returned.
"
::= { hwVlanMIBEntry 15 }
hwVlanForwarding OBJECT-TYPE
SYNTAX INTEGER
{
vlanMac(1),
vlanConnect(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN forwarding policy.
Options:
1. vlanMac(1) -indicates forwarding based on the VLAN+MAC.
2. vlanConnect(2) -indicates forwarding based on the SVLAN+CVLAN.
During the creation of a VLAN, if this leaf is not specified,
vlanMac(1) is adopted by default. You can perform the set
operation on this leaf to modify the VLAN forwarding policy.
The VLAN forwarding policy can also be configured in
hwForwardingMode of hwVlanSrvProfTable. If a VLAN service profile
is bound to the VLAN, the configuration in the VLAN service profile
takes effect.
"
DEFVAL { 1 }
::= { hwVlanMIBEntry 16 }
hwVlanPolicyBroadcast OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based forwarding policy for the broadcast packets.
Options:
1. forward(1) -indicates that the broadcast packets are transparently transmitted.
2. discard(2) -indicates that the broadcast packets are discarded.
During the creation of a VLAN, if this leaf is not specified, forward(1)
is adopted by default. You can perform the set operation on this leaf
to modify the VLAN-based forwarding policy for the broadcast packets.
The VLAN-based forwarding policy for the broadcast packets can also be
configured in hwPolicyBroadcast of hwVlanSrvProfTable. If a VLAN service
profile is bound to the VLAN, the configuration in the VLAN service profile takes effect.
"
DEFVAL { 1 }
::= { hwVlanMIBEntry 17 }
hwVlanPolicyMulticast OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based forwarding policy for the unknown multicast packets.
Options:
1. forward(1) -indicates that the unknown multicast packets are transparently transmitted.
2. discard(2) -indicates that the unknown multicast packets are discarded.
During the creation of a VLAN, if this leaf is not specified, forward(1)
is adopted by default. You can perform the set operation on this leaf to
modify the VLAN-based forwarding policy for the unknown multicast packets.
The VLAN-based forwarding policy for the unknown multicast packets can
also be configured in hwPolicyMulticast of hwVlanSrvProfTable. If a VLAN service
profile is bound to the VLAN, the configuration in the VLAN service profile takes effect.
"
DEFVAL { 1 }
::= { hwVlanMIBEntry 18 }
hwVlanPolicyUnknowncast OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based forwarding policy for the unknown unicast packets.
Options:
1. forward(1) -indicates that the unknown unicast packets are transparently transmitted.
2. discard(2) -indicates that the unknown unicast packets are discarded.
During the creation of a VLAN, if this leaf is not specified, forward(1) is adopted by default.
You can perform the set operation on this leaf to modify the VLAN-based
forwarding policy for the unknown unicast packets.
The VLAN-based forwarding policy for the unknown unicast packets can also be
configured in hwPolicyUnknowncast of hwVlanSrvProfTable. If a VLAN service profile is bound
to the VLAN, the configuration in the VLAN service profile takes effect.
"
DEFVAL { 1 }
::= { hwVlanMIBEntry 19 }
hwVlanOuterTpid OBJECT-TYPE
SYNTAX Unsigned32 (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Ethernet protocol type of a VLAN.
Range: 1536-65535 (0x0600-0xFFFF)
Default: 0x8100
"
DEFVAL { 33024 }
::= { hwVlanMIBEntry 20 }
hwVlanBindSrvProfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the VLAN service profile bound to a VLAN.
Range: a string of 0-32 characters
This leaf identifies a VLAN service profile, which must be
created in hwVlanSrvProfTable. The null character string indicates
that the binding relation between a VLAN and a VLAN service profile is deleted.
"
::= { hwVlanMIBEntry 21 }
hwVlanChangeEnable OBJECT-TYPE
SYNTAX INTEGER
{
idle(0),
addPort(1),
removePort(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the operation type of whether a standard port list maps a VLAN.
Options:
1. idle(0) -indicates invalid mapping.
2. addPort(1) -indicates that a port is added to the VLAN.
3. removePort(2) -indicates that a port is deleted from the VLAN.
This leaf must work with hwVlanPorts.
"
::= { hwVlanMIBEntry 22 }
hwVlanBindRaioProfileName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the name of the RAIO profile bound to a VLAN.
Range: a string of 0-32 characters
This leaf identifies a RAIO profile, which must be
created in hwDslamRAIOProfileTable. The null character string indicates
that the binding relation between a VLAN and a RAIO profile is deleted.
"
::= { hwVlanMIBEntry 23 }
hwVlanTrafficSuppressUnknowncastNetwork OBJECT-TYPE
SYNTAX Integer32 (0..13)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the unknown unicast traffic suppression on a VLAN.
Range: 0-13
Default: 0
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and corresponding bandwidth ranges are listed as follows:
---------------------------------------------------------------
NO. Min bandwidth(kbps) Max bandwidth(kbps) Package number(pps)
---------------------------------------------------------------
0 Not suppressed Not suppressed Not suppressed
1 6 145 12
2 12 291 24
3 24 582 48
4 48 1153 95
5 97 2319 191
6 195 4639 382
7 390 9265 763
8 781 18531 1526
9 1562 37063 3052
10 3125 74126 6104
11 6249 148241 12207
12 12499 296483 24414
13 0 0 0
---------------------------------------------------------------
"
::= { hwVlanMIBEntry 24 }
hwVlanMethL2Forward OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the switch of MEth l2 forwarding on a VLAN.
Options:
1. enable(1) -Enable MEth l2 forwarding on a VLAN.
2. disable(2) -Disable MEth l2 forwarding on a VLAN.
The default value is disable(2).
"
::= { hwVlanMIBEntry 25 }
hwifSVLANVlanListTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwifSVLANVlanListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the super VLAN list, shows the sub VLANs in the super VLAN.
The index of this table is hwifSvlanVlanID.
"
::= { hwVlanMngObject 3 }
hwifSVLANVlanListEntry OBJECT-TYPE
SYNTAX HwifSVLANVlanListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the super VLAN list, shows the sub VLANs in the super VLAN.
The index of this entry is hwifSvlanVlanID.
"
INDEX { hwifSvlanVlanID }
::= { hwifSVLANVlanListTable 1 }
HwifSVLANVlanListEntry ::=
SEQUENCE {
hwifSvlanVlanID
VlanIndex,
hwifSvlanSubVlanlistLow
OCTET STRING,
hwifSvlanSubVlanlisHigh
OCTET STRING,
hwifSvlanOperStatus
RowStatus
}
hwifSvlanVlanID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, indicates the super VLAN ID "
::= { hwifSVLANVlanListEntry 1 }
hwifSvlanSubVlanlistLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low oct string for sub VLAN list of Primary VLANs, Each bit is one VLAN. All bits be 2048(256 * 8) VLAN.
Sub VLAN will be added to super VLAN.
"
::= { hwifSVLANVlanListEntry 2 }
hwifSvlanSubVlanlisHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high oct string for sub VLAN list of Primary VLANs, Each bit is one VLAN. All bits be 2048(256 * 8) VLAN
Sub VLAN will be added to super VLAN.
"
::= { hwifSVLANVlanListEntry 3 }
hwifSvlanOperStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"VLAN operational status, now support createAndGo(4),destroy(6)
"
::= { hwifSVLANVlanListEntry 4 }
hwifPVLANMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwifPVLANMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary VLAN lists of Primary VLANs.
The index of this table is hwifPvlanPrimaryVlanID.
"
::= { hwVlanMngObject 4 }
hwifPVLANMappingEntry OBJECT-TYPE
SYNTAX HwifPVLANMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Secondary VLAN lists of Primary VLANs.
The index of this entry is hwifPvlanPrimaryVlanID.
"
INDEX { hwifPvlanPrimaryVlanID }
::= { hwifPVLANMappingTable 1 }
HwifPVLANMappingEntry ::=
SEQUENCE {
hwifPvlanPrimaryVlanID
VlanIndex,
hwifPvlanSecondaryVlanlistLow
OCTET STRING,
hwifPvlanSecondaryVlanlistHigh
OCTET STRING,
hwifPvlanOperStatus
RowStatus
}
hwifPvlanPrimaryVlanID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Primary VLAN ID
"
::= { hwifPVLANMappingEntry 1 }
hwifPvlanSecondaryVlanlistLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second low oct string for sub VLAN list of Primary VLANs, Each bit is one VLAN. All bits be 2048(256 * 8) VLAN
Secondary VLAN will be added to primary VLAN.
"
::= { hwifPVLANMappingEntry 2 }
hwifPvlanSecondaryVlanlistHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second low oct string for sub VLAN list of Primary VLANs, Each bit is one VLAN. All bits be 2048(256 * 8) VLAN
Secondary VLAN will be added to primary VLAN.
"
::= { hwifPVLANMappingEntry 3 }
hwifPvlanOperStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"vlan operational status, now support createAndGo(4),destroy(6)
"
::= { hwifPVLANMappingEntry 4 }
hwRegionVLanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwRegionVLanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the region VLAN, it is used to configure the region VLAN.
The index of this table is hwVlanIndex.
"
::= { hwVlanMngObject 5 }
hwRegionVLanEntry OBJECT-TYPE
SYNTAX HwRegionVLanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the region VLAN, it is used to configure the region VLAN.
The index of this entry is hwVlanIndex.
"
INDEX { hwVlanIndex }
::= { hwRegionVLanTable 1 }
HwRegionVLanEntry ::=
SEQUENCE {
hwRegionVpi
Integer32,
hwRegionVci
Integer32,
hwRegionPVCRowStatus
RowStatus
}
hwRegionVpi OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"THE atm vpi of the VLAN.
"
::= { hwRegionVLanEntry 1 }
hwRegionVci OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The atm vci of the VLAN.
"
::= { hwRegionVLanEntry 2 }
hwRegionPVCRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status,now support createAndGo(4),destroy(6).
4 is used for creating group pvc for region VLAN,
6 is used for deleting group pvc for region VLAN.
"
::= { hwRegionVLanEntry 3 }
hwSmartVLanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSmartVLanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the smart VLAN, it is used to configure the smart VLAN.
The index of this table is hwSmartVlanID.
"
::= { hwVlanMngObject 6 }
hwSmartVLanEntry OBJECT-TYPE
SYNTAX HwSmartVLanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the smart VLAN, it is used to configure the smart VLAN.
The index of this entry is hwSmartVlanID.
"
INDEX { hwSmartVlanID }
::= { hwSmartVLanTable 1 }
HwSmartVLanEntry ::=
SEQUENCE {
hwSmartVlanID
VlanIndex,
hwSmartVlanUplinkPort
PortList,
hwSmartVlanDownlinkPort
PortList,
hwSmartVlanRowStatus
RowStatus
}
hwSmartVlanID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, indicates a smart VLAN ID.
"
::= { hwSmartVLanEntry 1 }
hwSmartVlanUplinkPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"smart VLAN uplink ports
"
::= { hwSmartVLanEntry 2 }
hwSmartVlanDownlinkPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"smart VLAN downlink ports
"
::= { hwSmartVLanEntry 3 }
hwSmartVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, now support createAndGo(4),destroy(6)
"
::= { hwSmartVLanEntry 4 }
hwMuxVlanEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable MUX VLAN.
Options:
1. enabled(1) -Enable MUX VLAN.
2. disabled(2) -Disable MUX VLAN.
"
::= { hwVlanMngObject 7 }
hwMuxVlanPortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMuxVlanPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Mux VLAN port configuration, it is used to configure the Mux VLAN port.
The index of this table is ifIndex.
"
::= { hwVlanMngObject 8 }
hwMuxVlanPortConfEntry OBJECT-TYPE
SYNTAX HwMuxVlanPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Mux VLAN port configuration, it is used to configure the Mux VLAN port.
The index of this entry is ifIndex.
"
INDEX { ifIndex }
::= { hwMuxVlanPortConfTable 1 }
HwMuxVlanPortConfEntry ::=
SEQUENCE {
hwMuxVlanPortType
INTEGER,
hwMuxVlanStartVlanId
Integer32,
hwMuxVlanGroupNum
Integer32,
hwMuxVlanPortConfRowStatus
RowStatus,
hwMuxVlanUplinkPort
Integer32,
hwMuxVlanDownlinkPort
Integer32
}
hwMuxVlanPortType OBJECT-TYPE
SYNTAX INTEGER
{
uplinkPort(1),
cascadingPort(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configure the uplink-port or cascading-port for the MUX VLAN.
Options:
1. uplinkPort(1) -uplink port
2. cascadingPort(2) -cascading port
"
DEFVAL { 2 }
::= { hwMuxVlanPortConfEntry 1 }
hwMuxVlanStartVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The start VLAN ID of Mux VLAN.
"
DEFVAL { 128 }
::= { hwMuxVlanPortConfEntry 2 }
hwMuxVlanGroupNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN group number.
"
::= { hwMuxVlanPortConfEntry 3 }
hwMuxVlanPortConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, now support createAndGo(4),destroy(6).
"
::= { hwMuxVlanPortConfEntry 4 }
hwMuxVlanUplinkPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Uplink port for mux VLAN configuration.(for UA 5000)
"
::= { hwMuxVlanPortConfEntry 5 }
hwMuxVlanDownlinkPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Downlink port for mux VLAN configuration.
If the value is -1, use inner port instead(Only used for UA5000).
"
::= { hwMuxVlanPortConfEntry 6 }
hwMuxVlanSlotConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMuxVlanSlotConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the I/O board MUX VLAN configure, it is used to configure the I/O board MUX VLAN.
The index of this table is hwSlotIndex.
"
::= { hwVlanMngObject 9 }
hwMuxVlanSlotConfEntry OBJECT-TYPE
SYNTAX HwMuxVlanSlotConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the I/O board MUX VLAN configure, it is used to configure the I/O board MUX VLAN.
The index of this entry is hwSlotIndex.
"
INDEX { hwSlotIndex }
::= { hwMuxVlanSlotConfTable 1 }
HwMuxVlanSlotConfEntry ::=
SEQUENCE {
hwMuxVlanSlotStartVlanId
Integer32,
hwMuxVlanSlotRowStatus
RowStatus
}
hwMuxVlanSlotStartVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The start VLAN ID for the I/O board.
"
::= { hwMuxVlanSlotConfEntry 1 }
hwMuxVlanSlotRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, now support createAndGo(4),destroy(6).
"
::= { hwMuxVlanSlotConfEntry 2 }
hwMultiVLanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMultiVLanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Multi VLAN, it is used to configure the multi VLAN.
The index of this table is hwMultiVlanID.
"
::= { hwVlanMngObject 10 }
hwMultiVLanEntry OBJECT-TYPE
SYNTAX HwMultiVLanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Multi VLAN, it is used to configure the multi VLAN.
The index of this entry is hwMultiVlanID.
"
INDEX { hwMultiVlanID }
::= { hwMultiVLanTable 1 }
HwMultiVLanEntry ::=
SEQUENCE {
hwMultiVlanID
VlanIndex,
hwMultiVlanUplinkPort
PortList,
hwMultiVlanDownlinkPort
PortList,
hwMultiVlanRowStatus
RowStatus
}
hwMultiVlanID OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, indicates a Multi VLAN ID.
"
::= { hwMultiVLanEntry 1 }
hwMultiVlanUplinkPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multi VLAN uplink ports.
"
::= { hwMultiVLanEntry 2 }
hwMultiVlanDownlinkPort OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Multi VLAN downlink ports.
"
::= { hwMultiVLanEntry 3 }
hwMultiVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, now support createAndGo(4),destroy(6).
"
::= { hwMultiVLanEntry 4 }
hwVlanAggregationTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the relation between the super VLAN and the sub VLAN in a VLAN aggregation.
The indexes of this table are hwVlanAggregationSuperVlanId and hwVlanAggregationSubVlanId.
"
::= { hwVlanMngObject 11 }
hwVlanAggregationEntry OBJECT-TYPE
SYNTAX HwVlanAggregationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the relation between the super VLAN and the sub VLAN in a VLAN aggregation.
The indexes of this entry are hwVlanAggregationSuperVlanId and hwVlanAggregationSubVlanId.
"
INDEX { hwVlanAggregationSuperVlanId, hwVlanAggregationSubVlanId}
::= { hwVlanAggregationTable 1 }
HwVlanAggregationEntry ::= SEQUENCE {
hwVlanAggregationSuperVlanId
Integer32,
hwVlanAggregationSubVlanId
Integer32,
hwVlanAggregationSubVlanArpProxyStatus
INTEGER,
hwVlanAggregationSubVlanNdProxyStatus
INTEGER,
hwVlanAggregationRowStatus
RowStatus
}
hwVlanAggregationSuperVlanId OBJECT-TYPE
SYNTAX Integer32 (2..4093)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the super VLAN ID in a VLAN aggregation.
Range: 2-4093
"
::= { hwVlanAggregationEntry 1 }
hwVlanAggregationSubVlanId OBJECT-TYPE
SYNTAX Integer32 (2..4093)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the sub VLAN ID in a VLAN aggregation.
Range: 2-4093
"
::= { hwVlanAggregationEntry 2 }
hwVlanAggregationSubVlanArpProxyStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of ARP proxy in a sub VLAN.
Options:
1. enabled(1) -Enable ARP proxy in a sub VLAN.
2. disabled(2) -Disable ARP proxy in a sub VLAN.
Default: disabled(2)
"
::= { hwVlanAggregationEntry 3 }
hwVlanAggregationRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status, used for creating or deleting a VLAN aggregation.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a VLAN aggregation, specify the indexes, and set
hwVlanAggregationRowStatus to createAndGo(4) to perform the set operation.
To delete a VLAN aggregation, specify the indexes, and set
hwVlanAggregationRowStatus to destroy(6) to perform the set operation.
During query, the value of this leaf is the fixed active(1).
"
::= { hwVlanAggregationEntry 4 }
hwVlanAggregationSubVlanNdProxyStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the status of ND proxy in a sub VLAN.
Options:
1. enabled(1) -Enable ND proxy in a sub VLAN.
2. disabled(2) -Disable ND proxy in a sub VLAN.
Default: disabled(2)
"
::= { hwVlanAggregationEntry 5 }
hwStackingVlanInnerEthernetType OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Ethernet protocol type of the inner VLAN tag supported by VLAN stacking.
Range: 0-65535
Default: 0x8100
"
::= { hwVlanMngObject 13 }
hwVlanUpCarTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanUpCarEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN up direct CAR.
The index of this table is hwVlanUpCarId.
"
::= { hwVlanMngObject 15 }
hwVlanUpCarEntry OBJECT-TYPE
SYNTAX HwVlanUpCarEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN up direct CAR.
The index of this entry is hwVlanUpCarId.
"
INDEX { hwVlanUpCarId }
::= { hwVlanUpCarTable 1 }
HwVlanUpCarEntry ::=
SEQUENCE {
hwVlanUpCarId
Integer32,
hwVlanUpCarName
OCTET STRING,
hwVlanUpCarBandValue
Integer32,
hwVlanUpCarBurstValue
Integer32,
hwVlanUpCarIsUsed
INTEGER,
hwVlanUpCarRowStatus
RowStatus
}
hwVlanUpCarId OBJECT-TYPE
SYNTAX Integer32 (1..4000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, indicates a up direct Carid.
"
::= { hwVlanUpCarEntry 1 }
hwVlanUpCarName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Up direct car name.
"
::= { hwVlanUpCarEntry 2 }
hwVlanUpCarBandValue OBJECT-TYPE
SYNTAX Integer32 (64..1048512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Car band value,The car value is multiple of 64kbps.
Unit :kbps
"
::= { hwVlanUpCarEntry 3 }
hwVlanUpCarBurstValue OBJECT-TYPE
SYNTAX Integer32 (2..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Car burst value.
Unit:kbps
"
::= { hwVlanUpCarEntry 4 }
hwVlanUpCarIsUsed OBJECT-TYPE
SYNTAX INTEGER
{
used(1),
noUsed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag indicates whether the carid is used.
Options:
1. used(1) -The carid is used.
2. noUsed(2) -The carid is no-used.
"
::= { hwVlanUpCarEntry 5 }
hwVlanUpCarRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, now support createAndGo(4),destroy(6).
"
::= { hwVlanUpCarEntry 6 }
hwVlanDownCarTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanDownCarEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN down direct CAR.
The index of this table is hwVlanDownCarId.
"
::= { hwVlanMngObject 16 }
hwVlanDownCarEntry OBJECT-TYPE
SYNTAX HwVlanDownCarEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN down direct CAR.
The index of this entry is hwVlanDownCarId.
"
INDEX { hwVlanDownCarId }
::= { hwVlanDownCarTable 1 }
HwVlanDownCarEntry ::=
SEQUENCE {
hwVlanDownCarId
Integer32,
hwVlanDownCarName
OCTET STRING,
hwVlanDownCarBandValue
Integer32,
hwVlanDownCarBurstValue
Integer32,
hwVlanDownCarIsUsed
INTEGER,
hwVlanDownCarRowStatus
RowStatus
}
hwVlanDownCarId OBJECT-TYPE
SYNTAX Integer32 (1..4000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table, indicates a down direct carid.
"
::= { hwVlanDownCarEntry 1 }
hwVlanDownCarName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Down direct car name.
"
::= { hwVlanDownCarEntry 2 }
hwVlanDownCarBandValue OBJECT-TYPE
SYNTAX Integer32 (64..1048512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Car band value,The car value is multiple of 64kbps.
Unit: kbps
"
::= { hwVlanDownCarEntry 3 }
hwVlanDownCarBurstValue OBJECT-TYPE
SYNTAX Integer32 (2..8192)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Car burst value.
Unit: kbps
"
::= { hwVlanDownCarEntry 4 }
hwVlanDownCarIsUsed OBJECT-TYPE
SYNTAX INTEGER
{
used(1),
noUsed(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The flag indicates whether the carid is used.
Options:
1. used(1) -The carid is used.
2. noUsed(2) -The carid is no-used.
"
::= { hwVlanDownCarEntry 5 }
hwVlanDownCarRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status, now support createAndGo(4),destroy(6).
"
::= { hwVlanDownCarEntry 6 }
hwVlanParaTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN parameters, include hwVlanParaIndex, hwVlanMacLearnCpability, hwVlanMaxMacLearnNum,
hwVlanUpdirectCar, hwVlanDownDirectCar, it is used to configure the VLAN param.
The index of this table is hwVlanParamIndex.
"
::= { hwVlanMngObject 17 }
hwVlanParaEntry OBJECT-TYPE
SYNTAX HwVlanParaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the VLAN parameters, include hwVlanParaIndex, hwVlanMacLearnCpability, hwVlanMaxMacLearnNum,
hwVlanUpdirectCar, hwVlanDownDirectCar, it is used to configure the VLAN param.
The index of this entry is hwVlanParamIndex.
"
INDEX { hwVlanParaIndex }
::= { hwVlanParaTable 1 }
HwVlanParaEntry ::=
SEQUENCE {
hwVlanParaIndex
VlanIndex,
hwVlanMacLearnCpability
INTEGER,
hwVlanMaxMacLearnNum
Integer32,
hwVlanUpDirectCarID
Integer32,
hwVlanDownDirectCarID
Integer32
}
hwVlanParaIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index of the table,the VLAN index means Vlan Id.
"
::= { hwVlanParaEntry 1 }
hwVlanMacLearnCpability OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC learning or not flag by VLAN.
Options:
1. enabled(1) -Enable MAC learning by VLAN.
2. disabled(2) -Disable MAC learning by VLAN.
"
DEFVAL { 1 }
::= { hwVlanParaEntry 2 }
hwVlanMaxMacLearnNum OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN max mac learn number.
"
DEFVAL { 255 }
::= { hwVlanParaEntry 3 }
hwVlanUpDirectCarID OBJECT-TYPE
SYNTAX Integer32 (1..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN up direct carID.
"
DEFVAL { 1 }
::= { hwVlanParaEntry 4 }
hwVlanDownDirectCarID OBJECT-TYPE
SYNTAX Integer32 (1..4000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN down direct carID.
"
DEFVAL { 1 }
::= { hwVlanParaEntry 5 }
hwMethL2Vlan OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set the Meth L2 function of the VLAN.
"
::= { hwVlanMngObject 23 }
hwDocsDefaultSrvVlanID OBJECT-TYPE
SYNTAX Integer32 (1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the service svlan of DOCSIS service.
The default value is 1.
"
::= { hwVlanMngObject 24 }
hwStackingVlanOuterEthernetType OBJECT-TYPE
SYNTAX Unsigned32 (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the Ethernet protocol type of the outer VLAN tag supported by VLAN stacking.
Range: 0x600-0xffff
Default: 0x8100
"
::= { hwVlanMngObject 65000 }
hwDot1adTpid OBJECT-TYPE
SYNTAX Unsigned32 (1536..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the value of the 802.1ad Ethernet protocol type.
The Ethernet protocol type of the outer VLAN tag of a port can
be configured to dot1q or dot1ad. The value of dot1q is invariably 0x8100;
the value of dot1ad is configurable, but cannot be the values of
other standard protocols, such as 0x0806.
The default value of dot1ad is 0x88a8.
Range: 0x600-0xffff
"
::= { hwVlanMngObject 65001 }
hwPortOuterEthernetTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPortOuterEthernetTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the Ethernet protocol type of the outer VLAN tag of a port.
The index of this table is ifIndex (for details about how to calculate the value of
ifIndex, see the MA5600T ifIndex MIB Encoding Rules).
"
::= { hwVlanMngObject 65002 }
hwPortOuterEthernetTypeEntry OBJECT-TYPE
SYNTAX HwPortOuterEthernetTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the Ethernet protocol type of the outer VLAN tag of a port.
The index of this entry is ifIndex (for details about how to calculate the value of
ifIndex, see the MA5600T ifIndex MIB Encoding Rules).
"
INDEX { ifIndex }
::= { hwPortOuterEthernetTypeTable 1 }
HwPortOuterEthernetTypeEntry ::=
SEQUENCE {
hwPortOuterEthernetType
INTEGER
}
hwPortOuterEthernetType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
dot1qTpid(1),
dot1adTpid(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Ethernet protocol type of the outer VLAN tag of a port.
Options:
1. invalid(-1) -it indicates that the port does not support the
Ethernet protocol type of the outer VLAN. During the query,
the invalid value -1 is fixedly returned.
2. dot1qTpid(1) -it is valid for all service streams on the port.
3. dot1adTpid(2) -it is valid for only switching-oriented and
connection-oriented service streams with two VLAN tags on the port.
Default: dot1qTpid(1)
"
DEFVAL { 1 }
::= { hwPortOuterEthernetTypeEntry 1 }
hwVlanLocalSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the global Local VLAN switch.
Options:
1. enable(1) -the switch is enable.
2. disable(2) -the switch is disabled.
Default: disable(2)
"
::= { hwVlanMngObject 65003 }
hwLocalVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwLocalVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Local VLAN, it is used to configure the Local VLAN.
The index of this table is hwVlanIndex.
"
::= { hwVlanMngObject 65004 }
hwLocalVlanEntry OBJECT-TYPE
SYNTAX HwLocalVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the Local VLAN, it is used to configure the Local VLAN.
The index of this entry is hwVlanIndex.
"
INDEX { hwVlanIndex }
::= { hwLocalVlanTable 1 }
HwLocalVlanEntry ::=
SEQUENCE {
hwLocalVlan
INTEGER
}
hwLocalVlan OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The flag indicates whether to set the Local VLAN.
Options:
1. enable(1) -Enable local VLAN.
2. disable(2) -Disable local VLAN.
"
DEFVAL { 2 }
::= { hwLocalVlanEntry 1 }
hwVlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes VLAN interface management, including IP address
management, enabling and disabling of the DHCP client, and
DHCP client option 60.
The index of this table is hwVlanInterfaceID.
"
::= { hwVlanMngObject 2 }
hwVlanInterfaceEntry OBJECT-TYPE
SYNTAX HwVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes VLAN interface management, including IP address
management, enabling and disabling of the DHCP client, and
DHCP client option 60.
The index of this entry is hwVlanInterfaceID.
"
INDEX { hwVlanInterfaceID }
::= { hwVlanInterfaceTable 1 }
HwVlanInterfaceEntry ::=
SEQUENCE {
hwVlanInterfaceID
Integer32,
hwVlanID
Integer32,
hwVlanIpAddress
IpAddress,
hwVlanIpAddressMask
IpAddress,
hwVlanInterfaceAdminStatus
INTEGER,
hwVlanInterfaceFrameType
INTEGER,
hwInterfaceRowStatus
RowStatus,
hwVlanInterfaceLinkStatus
INTEGER,
hwVlanIfIPMode
INTEGER,
hwVlanIfDhcpClientOption60
OCTET STRING,
hwVlanIfVlanEncapMode
INTEGER,
hwVlanIfVlanInnerLabel
Integer32,
hwVlanIfDHCPSStatus
INTEGER,
hwIPv6MTU
Integer32,
hwIPv4MTU
Integer32
}
hwVlanInterfaceID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of a VLAN interface, which maps a VLAN ID.
For example, the index of VLAN interface 3 is 3.
"
::= { hwVlanInterfaceEntry 1 }
hwVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the corresponding VLAN ID of a VLAN interface.
"
::= { hwVlanInterfaceEntry 2 }
hwVlanIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the IP address of a VLAN interface.
Default: 0.0.0.0.
"
::= { hwVlanInterfaceEntry 3 }
hwVlanIpAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the IP address subnet mask.
"
::= { hwVlanInterfaceEntry 4 }
hwVlanInterfaceAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the management status of a VLAN interface.
Options:
1. up(1) -indicates up status.
2. down(2) -indicates down status.
Default: up(1)
"
::= { hwVlanInterfaceEntry 5 }
hwVlanInterfaceFrameType OBJECT-TYPE
SYNTAX INTEGER
{
ethernetii(1),
ethernetsnap(2),
ethernet8022(3),
ethernet8023(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the type of the frame that can be received by a VLAN interface.
Options:
1. ethernetii(1) -For the frame format of ethernetii(1), see RFC894.
2. ethernetsnap(2) -The value is not supported.
3. ethernet8022(3) -The value is not supported.
4. ethernet8023(4) -The value is not supported.
Currently, only ethernetii(1) is supported.
"
::= { hwVlanInterfaceEntry 6 }
hwInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for create, delete and modify operations.
Options:
1. createAndGo(4)
2. destroy(6)
3. active(1)
"
::= { hwVlanInterfaceEntry 7 }
hwVlanInterfaceLinkStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the protocol status of a link that is contained in a VLAN interface.
Options:
1. up(1) -The protocol status of a link that is contained in a VLAN interface is up.
2. down(2) -The protocol status of a link that is contained in a VLAN interface is down.
"
::= { hwVlanInterfaceEntry 8 }
hwVlanIfIPMode OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of obtaining an IP address.
Options:
1. static(1) -Configured statically.
2. dhcp(2) -Obtained through DHCP.
"
::= { hwVlanInterfaceEntry 9 }
hwVlanIfDhcpClientOption60 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the option 60 information carried in DHCP packets that are sent by a L3
interface when obtaining an IP address in the DHCP mode.
Range: 0-32 characters
"
::= { hwVlanInterfaceEntry 10 }
hwVlanIfVlanEncapMode OBJECT-TYPE
SYNTAX INTEGER
{
singleTag(1),
doubleTag(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the VLAN encapsulation mode of a VLAN interface.
Options:
1. singleTag(1) -Single tag VLAN encapsulation mode.
2. doubleTag(2) -Double tag VLAN encapsulation mode.
Default: singleTag(1)
"
::= { hwVlanInterfaceEntry 11 }
hwVlanIfVlanInnerLabel OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the inner VLAN ID when the VLAN encapsulation mode of a VLAN interface is double-tag mode.
Range: 1-4095
Default: 1
"
::= { hwVlanInterfaceEntry 12 }
hwVlanIfDHCPSStatus OBJECT-TYPE
SYNTAX INTEGER
{
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes the mode of dhcp server on this interface.
Options:
1. disable(1) -disable dhcp server.
2. enable(2) -enable dhcp server.
Default: disable(1)
"
::= { hwVlanInterfaceEntry 13 }
hwIPv6MTU OBJECT-TYPE
SYNTAX Integer32 (-1|1280..1499|1501..1560)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the maximum transmission unit of vlanif.If you set it on one vlanif,all the vlanif will
be configured. For P300 device, the node can take effect on IPV4 and IPV6. For Saturn device, it only takes
effect on IPV6.
Range: -1,1280-1499,1501-1560. For P300 device, the range is -1,1501-1560. For Saturn device, the range is
-1,1280-1499,1501-1560.
Deafult:-1,this value means the MTU of vlanif is the default value(for example: 1500).
"
::= { hwVlanInterfaceEntry 14 }
hwIPv4MTU OBJECT-TYPE
SYNTAX Integer32 (-1|1501..1560)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to configure the maximum transmission unit of vlanif. The node is only supported on Saturn device. It
only takes effect on IPV4.
Range: -1,1501-1560
Deafult:-1,this value means the MTU of vlanif is the default value(for example: 1500).
"
::= { hwVlanInterfaceEntry 15 }
hwVlanInterfaceSubIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanInterfaceSubIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes management of the secondary IP addresses of a VLAN interface.
The indexes of this table are hwVlanInterfaceIDWithSub, hwVlanSubIpAddress and hwVlanSubIpAddressMask.
"
::= { hwVlanMngObject 22 }
hwVlanInterfaceSubIpAddrEntry OBJECT-TYPE
SYNTAX HwVlanInterfaceSubIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes management of the secondary IP addresses of a VLAN interface.
The indexes of this entry are hwVlanInterfaceIDWithSub, hwVlanSubIpAddress and hwVlanSubIpAddressMask.
"
INDEX { hwVlanInterfaceIDWithSub, hwVlanSubIpAddress, hwVlanSubIpAddressMask}
::= { hwVlanInterfaceSubIpAddrTable 1 }
HwVlanInterfaceSubIpAddrEntry ::=
SEQUENCE {
hwVlanInterfaceIDWithSub
Integer32,
hwVlanSubIpAddress
IpAddress,
hwVlanSubIpAddressMask
IpAddress,
hwInterfaceSubIpAddrRowStatus
RowStatus
}
hwVlanInterfaceIDWithSub OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the index of a VLAN interface, which maps a VLAN ID. For example,
the index of VLAN interface 3 is 3.
"
::= { hwVlanInterfaceSubIpAddrEntry 1 }
hwVlanSubIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the secondary IP address of a VLAN interface.
"
::= { hwVlanInterfaceSubIpAddrEntry 2 }
hwVlanSubIpAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the subnet mask of the secondary IP address of a VLAN interface.
"
::= { hwVlanInterfaceSubIpAddrEntry 3 }
hwInterfaceSubIpAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used for create, modify and delete operations.
Options:
1. createAndGo(4)
2. destroy(6)
3. active(1)
"
::= { hwVlanInterfaceSubIpAddrEntry 4 }
hwPacketTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwPacketTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the status of the L2 transparent transmission of RIP packets and VTP/CDP packets in a VLAN.
The index of this table is hwVlanIndex.
"
::= { hwVlanMngObject 21 }
hwPacketTunnelEntry OBJECT-TYPE
SYNTAX HwPacketTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the status of the L2 transparent transmission of RIP packets and VTP/CDP packets in a VLAN.
The index of this entry is hwVlanIndex.
"
INDEX { hwVlanIndex }
::= { hwPacketTunnelTable 1 }
HwPacketTunnelEntry ::=
SEQUENCE {
hwPacketTunnelRip
INTEGER,
hwPacketTunnelVTPCDP
INTEGER
}
hwPacketTunnelRip OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the transparent transmission of RIP packets in a VLAN.
Options:
1. enable(1) -Enable transparent transmission of RIP packets in a VLAN.
2. disable(2) -Disable transparent transmission of RIP packets in a VLAN.
Default: disable(2)
"
::= { hwPacketTunnelEntry 1}
hwPacketTunnelVTPCDP OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the transparent transmission of VTP/CDP packets in a VLAN.
Options:
1. enable(1) -Enable transparent transmission of VTP/CDP packets in a VLAN.
2. disable(2) -Disable transparent transmission of VTP/CDP packets in a VLAN.
Default: disable(2)
"
::= { hwPacketTunnelEntry 2}
hwBpduTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBpduTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the status of the L2 transparent transmission of BPDU packets.
The index of this table is hwVlanIndex.
"
::= { hwVlanMngObject 18 }
hwBpduTunnelEntry OBJECT-TYPE
SYNTAX HwBpduTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Used for setting and querying the status of the L2 transparent transmission of BPDU packets.
The index of this entry is hwVlanIndex.
"
INDEX { hwVlanIndex }
::= { hwBpduTunnelTable 1 }
HwBpduTunnelEntry ::=
SEQUENCE {
hwBpduTunnel
INTEGER
}
hwBpduTunnel OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of the L2 transparent transmission of BDPU packets in a VLAN.
Options:
1. enable(1) -Enable transparent transmission of BDPU packets in a VLAN.
2. disable(2) -Disable transparent transmission of BDPU packets in a VLAN.
Default: disable(2)
"
::= { hwBpduTunnelEntry 1}
hwVOIPAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVOIPAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VOIP multiply IP table.
The index of this table is hwVOIPAddressIndex
"
::= { hwVlanMngObject 19 }
hwVOIPAddressEntry OBJECT-TYPE
SYNTAX HwVOIPAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"VOIP multiply IP table.
The index of this entry is hwVOIPAddressIndex
"
INDEX { hwVOIPAddressIndex }
::= { hwVOIPAddressTable 1 }
HwVOIPAddressEntry ::=
SEQUENCE {
hwVOIPAddressIndex
Integer32,
hwVOIPIPType
INTEGER,
hwVOIPIPAddress
IpAddress,
hwVOIPSubMask
IpAddress,
hwVOIPGateway
IpAddress,
hwVOIPMACAddress
OCTET STRING,
hwVOIPVlanTagIdentifier
Integer32,
hwVOIPQosIPStrategy
INTEGER,
hwVOIPAddressRowStatus
RowStatus,
hwVOIPAddressObtainMode
INTEGER,
hwVOIPPPPOEClientName
OCTET STRING,
hwVOIPIPAddressSrc
INTEGER
}
hwVOIPAddressIndex OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"the index scope is 0-63
"
::= { hwVOIPAddressEntry 1 }
hwVOIPIPType OBJECT-TYPE
SYNTAX INTEGER
{
media(1),
signaling(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the type of VOIP IP.
Options:
1. media(1) -indicates that the type of VOIP IP is media.
2. signaling(2) -indicates that the type of VOIP IP is signaling.
"
::= { hwVOIPAddressEntry 2 }
hwVOIPIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address"
::= { hwVOIPAddressEntry 3 }
hwVOIPSubMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"subMask of VAG "
::= { hwVOIPAddressEntry 4 }
hwVOIPGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"gateway of VAG"
::= { hwVOIPAddressEntry 5 }
hwVOIPMACAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address"
::= { hwVOIPAddressEntry 6 }
hwVOIPVlanTagIdentifier OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vlanid of VAG"
::= { hwVOIPAddressEntry 7 }
hwVOIPQosIPStrategy OBJECT-TYPE
SYNTAX INTEGER
{
tos(1),
dscp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the qos ip strategy
Options:
1. tos(1) -indicates that the qos ip strategy is tos.
2. dscp(2) -indicates that the qos ip strategy is dscp."
::= { hwVOIPAddressEntry 8 }
hwVOIPAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of this conceptual row.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Until instances of all corresponding columns are appropriately configured,
the value of the corresponding instance of the hwAddressRowStatus column is
'notReady'.
"
::= { hwVOIPAddressEntry 9 }
hwVOIPAddressObtainMode OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
pppoe(2),
dhcp(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip address obtain mode:
Options:
1. static(1) -static config
2. pppoe(2) -pppoe dynamic obtain
3. dhcp(3) -dhcp dynamic obtain
"
::= { hwVOIPAddressEntry 10 }
hwVOIPPPPOEClientName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ip address name of pppoe dynamic obtain, the same as pppoe client name"
::= { hwVOIPAddressEntry 11 }
hwVOIPIPAddressSrc OBJECT-TYPE
SYNTAX INTEGER
{
static(0),
dhcp(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the source type of IP.
Options:
1. static(0) -indicates that the source type of IP is static.
2. dhcp(1) -indicates that the source type of IP is dhcp.
"
::= { hwVOIPAddressEntry 12 }
hwVOIPQosTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVOIPQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the Qos IP tos and VLAN priority
The index of this table is hwVOIPAddressIndex
"
::= { hwVlanMngObject 20 }
hwVOIPQosEntry OBJECT-TYPE
SYNTAX HwVOIPQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the Qos IP tos and VLAN priority
The index of this entry is hwVOIPAddressIndex
"
INDEX { hwVOIPAddressIndex}
::= { hwVOIPQosTable 1 }
HwVOIPQosEntry ::=
SEQUENCE {
hwVOIPQosIPTosValue
Integer32,
hwVOIPQosIPDscpValue
Integer32,
hwVOIPQosVlanPriority
Integer32,
hwVOIPQosIPAddressSrc
INTEGER
}
hwVOIPQosIPTosValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Qos value of tos"
::= { hwVOIPQosEntry 1 }
hwVOIPQosIPDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Qos value of dscp"
::= { hwVOIPQosEntry 2 }
hwVOIPQosVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Qos VLAN priority"
::= { hwVOIPQosEntry 3 }
hwVOIPQosIPAddressSrc OBJECT-TYPE
SYNTAX INTEGER
{
static(0),
dhcp(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the source type of IP.
Options:
1. static(0) -indicates that the source type of IP is static.
2. dhcp(1) -indicates that the source type of IP is dhcp.
"
::= { hwVOIPQosEntry 4 }
hwVlanSrvProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanSrvProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the attributes of a VLAN service profile, used for adding or deleting
a VLAN service profile, or modifying the status of the attributes in an existing
VLAN service profile.
The index of this table is hwVlanSrvProfName.
"
::= { hwVlanMngObject 25 }
hwVlanSrvProfEntry OBJECT-TYPE
SYNTAX HwVlanSrvProfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the attributes of a VLAN service profile, used for adding or deleting
a VLAN service profile, or modifying the status of the attributes in an existing
VLAN service profile.
The index of this entry is hwVlanSrvProfName.
"
INDEX { hwVlanSrvProfName }
::= { hwVlanSrvProfTable 1 }
HwVlanSrvProfEntry ::=
SEQUENCE {
hwVlanSrvProfName
OCTET STRING,
hwForwardingMode
INTEGER,
hwAntiIpSpoofingSwitch
INTEGER,
hwAntiMacSpoofingSwitch
INTEGER,
hwPPPoEMacMode
INTEGER,
hwBpduTunnelSwitch
INTEGER,
hwRipTunnelSwitch
INTEGER,
hwVtpCdpTunnelSwitch
INTEGER,
hwDhcpMode
INTEGER,
hwDhcpProxySwitch
INTEGER,
hwDhcpOption82Switch
INTEGER,
hwPitpSwitch
INTEGER,
hwPolicyBroadcast
INTEGER,
hwPolicyMulticast
INTEGER,
hwPolicyUnknowncast
INTEGER,
hwUserBridging
INTEGER,
hwDhcpSuppressSwitch
INTEGER,
hwMismatchIgmpPolicy
INTEGER,
hwVmacStatus
INTEGER,
hwIPoEMacMode
INTEGER,
hwVmacAgingMode
INTEGER,
hwFabricMacLearningSwitch
INTEGER,
hwOspfTunnelSwitch
INTEGER,
hwL3ProtocolTunnelSwitch
INTEGER,
hwDhcpv6Mode
INTEGER,
hwDhcpv6OptionSwitch
INTEGER,
hwVmacIPoESubStatus
INTEGER,
hwVmacPPPoESubStatus
INTEGER,
hwVmacPPPoASubStatus
INTEGER,
hwPPPoAMacMode
INTEGER,
hwAntiIpv6SpoofingSwitch
INTEGER,
hwIpv6DadProxySwitch
INTEGER,
hwIpv6BindRouteAndNdSwitch
INTEGER,
hwIpv6NsReplySwitch
INTEGER,
hwIpv4ArpReplySwitch
INTEGER,
hwDhcpRelayInterfaceRelayAgentSwitch
INTEGER,
hwPolicyMulticastFabric
INTEGER,
hwCableSourceVerify
INTEGER,
hwRipngTunnelSwitch
INTEGER,
hwIpv4ArpUnicastSwitch
INTEGER,
hwIpv4ArpUnicastunkonwnpolicy
INTEGER,
hwIpv6NsUnicastSwitch
INTEGER,
hwIpv6NsUnicastunkonwnpolicy
INTEGER,
hwIgmpUserMaxVlanTag
INTEGER,
hwRouterRedirectReverse
INTEGER,
hwCableIPv6SourceVerify
INTEGER,
hwProfileRowStatus
RowStatus
}
hwVlanSrvProfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the name of the VLAN service profile.
Range: a string of 1-32 characters
The input index consists of the VLAN service profile name and
the length of the VLAN service profile name.
The input VLAN service profile name must be ASCII codes.
Assume that you need to create a huawei VLAN service profile.
Because the ASCII value of huawei is 104.117.97.119.101.105 and
the length of huawei is 6, the index is 6.104.117.97.119.101.105.
"
::= { hwVlanSrvProfEntry 1 }
hwForwardingMode OBJECT-TYPE
SYNTAX INTEGER
{
vlanMac(1),
vlanConnect(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN forwarding policy.
Options:
1. vlanMac(1) -indicates forwarding based on the VLAN+MAC.
2. vlanConnect(2) -indicates forwarding based on the SVLAN+CVLAN.
3. notConfig(3) -indicates forwarding based on VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The VLAN forwarding policy can also be configured in hwVlanForwarding
of hwVlanMIBTable. If a VLAN service profile is bound to the VLAN,
the configuration in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 2 }
hwAntiIpSpoofingSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based anti-IP-spoofing function.
Options:
1. enable(1) -indicates that the anti-IP-spoofing function is enabled.
2. disable(2) -indicates that the anti-IP-spoofing function is disabled.
This leaf is optional for creating a VLAN service profile.
The anti-IP spoofing function in the global mode can be set in
hwIpDslamIpAddrDynamicBindingStatus of HUAWEI-IPDSLAM-SECURITY-MIB.
The final status of the anti-IP-spoofing function is determined by its
global-level switch and VLAN-level switch. The anti-IP-spoofing function
of a VLAN is enabled only when the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 3 }
hwAntiMacSpoofingSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based anti-MAC-spoofing function.
Options:
1. enable(1) -indicates that the anti-MAC-spoofing function is enabled.
2. disable(2)-indicates that the anti-MAC spoofing function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The anti-MAC spoofing function in the global mode can be set in
hwIpDslamAntiMacSpoofingStatus of HUAWEI-IPDSLAM-SECURITY-MIB.
The VLAN-based anti-MAC-spoofing function can also be configured
in hwIpDslamL2pVlanCtrlMacSpoofing of hwIpDslamL2pVlanCtrlTable
in HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB.
The final status of the anti-MAC-spoofing function is determined by
its global-level switch and VLAN-level switch. The anti-MAC spoofing
function of a VLAN is enabled only when the switches at both levels are
enabled. If a VLAN service profile is bound to the VLAN, the configuration
of the VLAN-based anti-MAC-spoofing function in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 4 }
hwPPPoEMacMode OBJECT-TYPE
SYNTAX INTEGER
{
multiMac(1),
singleMac(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based PPPoE single-MAC function.
Options:
1. multiMac(1) -indicates that the multi-MAC mode is adopted.
2. singleMac(2) -indicates that the single-MAC mode is adopted.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The PPPoE single-MAC function in the global mode can be set
in hwIpDslamPPPoEMacMode of HUAWEI-IPDSLAM-PPPOE-MIB.
The VLAN-based PPPoE single-MAC function can also be configured
in hwIpDslamL2pVlanCtrlPppoeMacMode of
hwIpDslamL2pVlanCtrlTable in HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB.
The final status of the PPPoE single-MAC function is determined
by its global-level switch and VLAN-level switch.
The PPPoE single-MAC function of a VLAN is enabled only
when the switches at both levels are enabled.
If a VLAN service profile is bound to the VLAN,
the configuration of the VLAN-based PPPoE single-MAC
function in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 5 }
hwBpduTunnelSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based BPDU transparent transmission function.
Options:
1. enable(1) -indicates that the BPDU transparent transmission function is enabled.
2. disable(2) -indicates that the BPDU transparent transmission function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The BPDU transparent transmission function can also be configured
in hwBpduTunnel of hwBpduTunnelTable. If a VLAN service profile is bound to the VLAN,
the configuration in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 6 }
hwRipTunnelSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based RIP transparent transmission function.
Options:
1. enable(1) -indicates that the RIP transparent transmission function is enabled.
2. disable(2) -indicates that the RIP transparent transmission function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The RIP transparent transmission function can also be configured in
hwPacketTunnelRip of hwPacketTunnelTable. If a VLAN service profile is bound to
the VLAN, the configuration in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 7 }
hwVtpCdpTunnelSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based VTP/CDP transparent transmission function.
Options:
1. enable(1) -indicates that the VTP/CDP transparent transmission function is enabled.
2. disable(2) -indicates that the VTP/CDP transparent transmission function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The VTP/CDP transparent transmission function can also be configured
in hwPacketTunnelVTPCDP of hwPacketTunnelTable. If a VLAN service profile
is bound to the VLAN, the configuration in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 8 }
hwDhcpMode OBJECT-TYPE
SYNTAX INTEGER
{
notConfig(1),
layer2(2),
l3Standard(3),
l3Option60(4),
l3MacRange(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based DHCP L2/L3 mode switch.
Options:
1. notConfig(1) -indicates that if the VLAN configuration exists,
the VLAN configuration takes effect.
Otherwise, the configuration in global mode takes effect.
2. layer2(2) -indicates the DHCP L2 forwarding mode.
In this mode, the device only transparently transmits
packets and does not process the packets.
3. l3Standard(3) -indicates the standard mode of the DHCP L3
forwarding mode. In this mode, packets select the
DHCP server through the VLAN L3 interface that is
used for forwarding the DHCP packets.
4. l3Option60(4) -indicates the DHCP option 60 mode of the DHCP L3
forwarding mode. In this mode, packets select the
DHCP server according to the option 60 field.
Option 60 is an option with code 60 in the DHCP packet.
It can identify the terminal type. That is, packets can
select the DHCP server according to terminal types.
5. l3MacRange(5) -indicates the MAC address segment mode of the DHCP L3
forwarding mode. In this mode, packets select the DHCP
server according to the MAC address segment to which
the source MAC address of the DHCP packets belong.
This leaf is optional for creating a VLAN service profile.
The DHCP L2/L3 mode in the global mode can also be set in hwDhcpRelayMode
and hwDhcpServerSelectMode of HUAWEI-DHCP-Proxy-MIB. The DHCP L2/L3 mode
at the VLAN level can also be set in hwDhcpServerSelectModeByVlanTable.
If a VLAN service profile is bound to the VLAN, the configuration in the
VLAN service profile takes effect. The global DHCP L2/L3 mode, however,
is not changed.
If no VLAN service profile is bound to the VLAN, but hwDhcpServerSelectModeByVlanTable
is configured, the configuration of hwDhcpServerSelectModeByVlanTable takes effect;
if hwDhcpServerSelectModeByVlanTable is not configured, the configuration
in the global mode takes effect.
"
::= { hwVlanSrvProfEntry 9 }
hwDhcpProxySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based DHCP proxy function.
Options:
1. enable(1) -indicates that the DHCP proxy is enabled.
2. disable(2) -indicates that the DHCP proxy is disabled.
This leaf is optional for creating a VLAN service profile.
The global DHCP proxy function can be configured in
hwDhcpProxyStatus of HUAWEI-DHCP-Proxy-MIB. The final
status of the DHCP proxy function is determined by its
global-level switch and VLAN-level switch. The DHCP
proxy function of a VLAN is enabled only when the switches
at both levels are enabled. When the DHCP mode of the VLAN
is configured to L2 mode, the configuration data can
be saved, but the configuration of the
DHCP proxy function does not take effect.
"
::= { hwVlanSrvProfEntry 10 }
hwDhcpOption82Switch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based DHCP option 82 function.
Options:
1. enable(1) -indicates that the DHCP option 82 function is enabled.
2. disable(2) -indicates that the DHCP option 82 function is disabled.
This leaf is optional for creating a VLAN service profile.
The global DHCP option 82 function can be configured in hwDhcpOption82Status
of HUAWEI-DHCP-Proxy-MIB. The final status of the DHCP option
82 function is determined by its global-level switch and VLAN-level switch.
The DHCP option 82 function of a VLAN is enabled only when
the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 11 }
hwPitpSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the PITP switch based on VLAN.
Options:
1. enable(1) -indicates enabling the PITP switch.
2. disable(2) -indicates disabling the PITP switch.
This leaf is optional for creating a VLAN service profile.
Leaf hwDslamPITPStatus in HUAWEI-DSLAM-PITP-MIB can be used for configuring the global
PITP switch. The final status of the PITP switch is determined by both the global-level
PITP switch and the VLAN-level PITP switch. The PITP function is enabled on the VLAN
only when the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 12 }
hwPolicyBroadcast OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based forwarding policy for the broadcast packets.
Options:
1. forward(1) -indicates that the broadcast packets are transparently transmitted.
2. discard(2) -indicates that the broadcast packets are discarded.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
You can perform the set operation on this leaf to modify
the VLAN-based forwarding policy for the broadcast packets.
The VLAN-based forwarding policy for the broadcast packets can
also be configured in hwVlanPolicyBroadcast of hwVlanMIBTable.
If a VLAN service profile is bound to the VLAN, the configuration
in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 13 }
hwPolicyMulticast OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based forwarding policy for the unknown multicast packets.
Options:
1. forward(1) -indicates that the unknown multicast packets are transparently transmitted.
2. discard(2) -indicates that the unknown multicast packets are discarded.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
You can perform the set operation on this leaf to modify the VLAN-based forwarding policy
for the unknown multicast packets.
The VLAN-based forwarding policy for the unknown multicast packets can
also be configured in hwVlanPolicyMulticast of hwVlanMIBTable.
If a VLAN service profile is bound to the VLAN, the configuration
in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 14 }
hwPolicyUnknowncast OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based forwarding policy for the unknown unicast packets.
Options:
1. forward(1) -indicates that the unknown unicast packets are transparently transmitted.
2. discard(2) -indicates that the unknown unicast packets are discarded.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
You can perform the set operation on this leaf
to modify the VLAN-based forwarding policy for the unknown unicast packets.
The VLAN-based forwarding policy for the unknown unicast packets can also be
configured in hwVlanPolicyUnknowncast of hwVlanMIBTable. If a VLAN service
profile is bound to the VLAN, the configuration in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 15 }
hwUserBridging OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based bridging function.
Options:
1. enable(1) -indicates bridging in a VLAN.
2. disable(2) -indicates L2 isolation in a VLAN.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 16 }
hwDhcpSuppressSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DHCP boardcast-suppress switch.
Options:
1. enable(1) -Enable DHCP boardcast-suppress.
2. disable(2) -Disable DHCP boardcast-suppress.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 17 }
hwMismatchIgmpPolicy OBJECT-TYPE
SYNTAX INTEGER
{
transparent(1),
discard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based forwarding policy for the mismatched IGMP packets.
Options:
1. transparent(1) -indicates that the mismatched IGMP packets are transparently transmitted.
2. discard(2) -indicates that the mismatched IGMP packets are discarded.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 18 }
hwVmacStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based VMAC function.
Options:
1. enable(1) -indicates that the VMAC function is enabled.
2. disable(2) -indicates that the VMAC function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The global VMAC function can be configured in hwIpDslamVmacStatus
of HUAWEI-IPDSLAM-VMAC-MIB. The VLAN-based VMAC function can
also be configured hwIpDslamL2pVlanCtrlVmacStatus
of HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB.
The final status of the VMAC function is determined by its
global-level switch and VLAN-level switch. The VMAC function
of a VLAN is enabled only when the switches at both levels are
enabled. If a VLAN service profile is bound to the VLAN,
the configuration of the VLAN-based VMAC function
in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 19 }
hwIPoEMacMode OBJECT-TYPE
SYNTAX INTEGER
{
multiMac(1),
singleMac(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the mode of allocating MAC addresses to DHCP users.
Options:
1. multiMac(1) -indicates the multi-MAC mode.
2. singleMac(2) -indicates the single-MAC mode.
This leaf is optional for creating a VLAN service profile.
The global mode of allocating MAC addresses to DHCP users
can be configured in hwIpDslamIPoEMacMode of HUAWEI-IPDSLAM-VMAC-MIB.
The final status of the mode of allocating MAC addresses to DHCP
users is determined by its global-level switch and VLAN-level switch.
The single-MAC mode of a VLAN can be enabled only when
the single-MAC mode is enabled at both levels.
"
::= { hwVlanSrvProfEntry 20 }
hwVmacAgingMode OBJECT-TYPE
SYNTAX INTEGER
{
macLearning(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the time selection mode for reallocating VMAC addresses to users.
Options:
1. macLearning(1) -indicates that the VMAC addresses are
reallocated to users after the corresponding MAC address learning entry ages.
2. dhcp(2) -indicates that the VMAC addresses are reallocated to users after
the corresponding IP addresses are released or the lease time of the IP address expires.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 21 }
hwFabricMacLearningSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based MAC address learning capability switch of the control board.
Options:
1. enable(1) -indicates that the VLAN-based MAC address learning is enabled.
2. disable(2) -indicates that the VLAN-based MAC address learning is disabled.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 22 }
hwOspfTunnelSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based OSPF transparent transmission function.
Options:
1. enable(1) -indicates that the OSPF transparent transmission function is enabled.
2. disable(2) -indicates that the OSPF transparent transmission function is disabled.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 23 }
hwL3ProtocolTunnelSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based L2 transparent transmission function
of other L3 protocol packets except RIP and OSPF packets.
Options:
1. enable(1) -indicates that the transparent transmission function is enabled.
2. disable(2) -indicates that the transparent transmission function is disabled.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 24 }
hwDhcpv6Mode OBJECT-TYPE
SYNTAX INTEGER
{
notConfig(1),
layer2(2),
layer3(3),
layer3option16(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based DHCPv6 L2/L3 mode switch.
Options:
1. notConfig(1) -indicates that the configuration in global mode takes effect.
2. layer2(2) -indicates the DHCPv6 L2 forwarding mode.
In this mode, the device only transparently transmits
packets and does not process the packets.
3. layer3(3) -indicates the standard mode of the DHCPv6 L3
forwarding mode. In this mode, packets select the
DHCPv6 server through the VLAN L3 interface that is
used for forwarding the DHCPv6 packets.
4. layer3option16(4) -indicates the option 16 mode of the DHCPv6 L3
forwarding mode. In this mode, packets select the
DHCPv6 server according to the option 16 field.
Option 16 is an option with code 16 in the DHCPv6 packets.
It can identify the terminal type. That is, packets can
select the DHCPv6 server according to terminal types.
This leaf is optional for creating a VLAN service profile.
The DHCPv6 L2/L3 mode in the global mode can also be set in hwDhcpv6RelayMode
of HUAWEI-DHCPV6-RELAY-MIB.
If a VLAN service profile is bound to the VLAN, and the hwDhcpv6Mode in VLAN service profile is not notConfig(1),
the configuration in the VLAN service profile takes effect. The global DHCPv6 L2/L3 mode, however, is not changed.
If no VLAN service profile is bound to the VLAN, or the hwDhcpv6Mode in VLAN service profile is notConfig(1),
the configuration in the global mode takes effect.
"
::= { hwVlanSrvProfEntry 25 }
hwDhcpv6OptionSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based DHCPv6 option function.
Options:
1. enable(1) -indicates that the DHCPv6 option 18 and optin 37 function are enabled.
2. disable(2) -indicates that the DHCPv6 option 18 and optin 37 function are disabled.
This leaf is optional for creating a VLAN service profile.
The global DHCPv6 option function can be configured in hwDhcpv6OptionStatus
of HUAWEI-DHCPV6-RELAY-MIB. The final status of the DHCPv6 option
function is determined by its global-level switch and VLAN-level switch.
The DHCPv6 option function of a VLAN is enabled only when
the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 26 }
hwVmacIPoESubStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based IPoE VMAC function.
Options:
1. enable(1) -indicates that the IPoE VMAC function is enabled.
2. disable(2) -indicates that the IPoE VMAC function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The VLAN-based IPoE VMAC function can be configured in
hwIpDslamL2pVlanCtrlVmacIPoESubStatus of HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB.
The status of the IPoE VMAC function is determined by its
VLAN-level switch. The IPoE VMAC function of a VLAN is enabled
only when the VLAN-level switch is enabled.
If a VLAN service profile is bound to the VLAN,
the configuration of the VLAN-based IPoE VMAC function
in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 27 }
hwVmacPPPoESubStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based PPPoE VMAC function.
Options:
1. enable(1) -indicates that the PPPoE VMAC function is enabled.
2. disable(2) -indicates that the PPPoE VMAC function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The VLAN-based PPPoE VMAC function can be configured in
hwIpDslamL2pVlanCtrlVmacPPPoESubStatus of HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB.
The status of the PPPoE VMAC function is determined by its
VLAN-level switch. The PPPoE VMAC function of a VLAN is enabled
only when the VLAN-level switch is enabled.
If a VLAN service profile is bound to the VLAN,
the configuration of the VLAN-based PPPoE VMAC function
in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 28 }
hwVmacPPPoASubStatus OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based PPPoA VMAC function.
Options:
1. enable(1) -indicates that the PPPoA VMAC function is enabled.
2. disable(2) -indicates that the PPPoA VMAC function is disabled.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The VLAN-based PPPoA VMAC function can be configured in
hwIpDslamL2pVlanCtrlVmacPPPoASubStatus of HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB.
The status of the PPPoA VMAC function is determined by its
VLAN-level switch. The PPPoA VMAC function of a VLAN is enabled
only when the VLAN-level switch is enabled.
If a VLAN service profile is bound to the VLAN,
the configuration of the VLAN-based PPPoA VMAC function
in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 29 }
hwPPPoAMacMode OBJECT-TYPE
SYNTAX INTEGER
{
multiMac(1),
singleMac(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based PPPoA single-MAC function.
Options:
1. multiMac(1) -indicates that the multi-MAC mode is adopted.
2. singleMac(2) -indicates that the single-MAC mode is adopted.
3. notConfig(3) -indicate by VLAN single switch.
This leaf is optional for creating a VLAN service profile.
The PPPoA single-MAC function in the global mode can be set
in hwIpDslamPPPoAMacMode of HUAWEI-IPDSLAM-PPPOE-MIB.
The VLAN-based PPPoA single-MAC function can also be configured
in hwIpDslamL2pVlanCtrlPppoaMacMode of
hwIpDslamL2pVlanCtrlTable in HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB.
The final status of the PPPoA single-MAC function is determined
by its global-level switch and VLAN-level switch.
The PPPoA single-MAC function of a VLAN is enabled only
when the switches at both levels are enabled.
If a VLAN service profile is bound to the VLAN,
the configuration of the VLAN-based PPPoA single-MAC
function in the VLAN service profile takes effect.
"
::= { hwVlanSrvProfEntry 30 }
hwAntiIpv6SpoofingSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based anti-IPv6-spoofing function.
Options:
1. enable(1) -indicates that the anti-IPv6-spoofing function is enabled.
2. disable(2) -indicates that the anti-IPv6-spoofing function is disabled.
This leaf is optional for creating a VLAN service profile.
The anti-IPv6-spoofing function in the global mode can be set in
hwIpDslamAntiIpv6SpoofingStatus of HUAWEI-IPDSLAM-SECURITY-MIB.
The final status of the anti-IPv6-spoofing function is determined by its
global-level switch and VLAN-level switch. The anti-IPv6-spoofing function
of a VLAN is enabled only when the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 31 }
hwIpv6DadProxySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based IPv6 dad proxy function.
Options:
1. enable(1) -indicates that the IPv6 dad proxy function is enabled.
2. disable(2) -indicates that the IPv6 dad proxy function is disabled.
This leaf is optional for creating a VLAN service profile.
The IPv6 dad proxy function in the global mode can be set in
hwIpDslamIpv6DadProxySwitch of HUAWEI-IPDSLAM-SECURITY-MIB.
The final status of the IPv6 dad proxy function is determined by its
global-level switch and VLAN-level switch. The IPv6 dad proxy function
of a VLAN is enabled only when the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 32 }
hwIpv6BindRouteAndNdSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based bind-route-nd function.
Options:
1. enable(1) -indicates that the bind-route-nd function is enabled.
2. disable(2) -indicates that the bind-route-nd function is disabled.
This leaf is optional for creating a VLAN service profile.
The bind-route-nd function in the global mode can be set in
hwIpDslamIpv6BindRouteAndNdSwitch of HUAWEI-IPDSLAM-SECURITY-MIB.
The final status of the bind-route-nd function is determined by its
global-level switch and VLAN-level switch. The bind-route-nd function
of a VLAN is enabled only when the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 33 }
hwIpv6NsReplySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based ns reply function.
Options:
1. enable(1) -indicates that the ns reply function is enabled.
2. disable(2) -indicates that the ns reply function is disabled.
This leaf is optional for creating a VLAN service profile.
The ns reply function in the global mode can be set in
hwIpDslamIpv6NsReplySwitch of HUAWEI-IPDSLAM-SECURITY-MIB.
The final status of the ns reply function is determined by its
global-level switch and VLAN-level switch. The ns reply function
of a VLAN is enabled only when the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 34 }
hwIpv4ArpReplySwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based arp reply function.
Options:
1. enable(1) -indicates that the arp reply function is enabled.
2. disable(2) -indicates that the arp reply function is disabled.
This leaf is optional for creating a VLAN service profile.
The arp reply function in the global mode can be set in
hwIpDslamIpv4ArpReplySwitch of HUAWEI-IPDSLAM-SECURITY-MIB.
The final status of the arp reply function is determined by its
global-level switch and VLAN-level switch. The arp replyd function
of a VLAN is enabled only when the switches at both levels are enabled.
"
::= { hwVlanSrvProfEntry 35 }
hwDhcpRelayInterfaceRelayAgentSwitch OBJECT-TYPE
SYNTAX INTEGER
{
receive(1),
send(2),
notConfig(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based filling mode of the GIADDR field of the current DHCP-relay upstream packet.
Options:
1. receive(1) -indicates that in the DHCP packet sent from the DHCP relay agent to the server,
the gateway IP address is set to the IP address of the Rx interface (user-side interface).
2. send(2) -indicates that in the DHCP packet sent from the DHCP relay agent to the server,
the gateway IP address is set to the IP address of the Tx interface (network-side interface).
3. notConfig(3) -indicates that the configuration in the global mode takes effect.
This leaf is optional for creating a VLAN service profile.
The filling mode of the GIADDR field of the current DHCP-relay upstream packet in the global mode
can be set in hwDhcpRelayInterfaceRelayAgent of HUAWEI-DHCP-PROXY-MIB.
The final status of the configuration is determined by its global-level switch and VLAN-level switch.
If a VLAN service profile is bound to the VLAN, and the hwDhcpRelayInterfaceRelayAgentSwitch
in VLAN service profile is not notConfig(3), the configuration in the VLAN service profile takes effect.
If no VLAN service profile is bound to the VLAN, or the hwDhcpRelayInterfaceRelayAgentSwitch
in VLAN service profile is notConfig(3), the configuration in the global mode takes effect.
"
::= { hwVlanSrvProfEntry 36 }
hwPolicyMulticastFabric OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based forwarding policy for the control board unknown multicast packets.
Options:
1. forward(1) -indicates that the control board unknown multicast packets are transparently transmitted.
2. discard(2) -indicates that the control board unknown multicast packets are discarded.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 37 }
hwCableSourceVerify OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates VLAN-based Source Address Verification (SAV) function for CM configured policies.
Options:
1. enable(1) -indicates that the VLAN-based Source Address Verification for CM configured
policies are enabled.
2. disable(2) -indicates that the VLAN-based Source Address Verification for CM configured
policies are ignored.
"
::= { hwVlanSrvProfEntry 38 }
hwRipngTunnelSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based RIPng transparent transmission function.
Options:
1. enable(1) -indicates that the RIPng transparent transmission function is enabled.
2. disable(2) -indicates that the RIPng transparent transmission function is disabled.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 39 }
hwIpv4ArpUnicastSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based ARP unicast function.
Options:
1. enable(1) -indicates that the ARP unicast function is enabled.
2. disable(2) -indicates that the ARP unicast function is disabled.
This leaf is optional for creating a VLAN service profile.
Default: disable(2)
"
::= { hwVlanSrvProfEntry 40 }
hwIpv4ArpUnicastunkonwnpolicy OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for setting whether to forward or discard ARP packets received from the network side when the user is offline.
It takes effect only when the ARP unicast function is enabled.
Options:
1. forward(1) -indicates that ARP packets are broadcast to ports inside the VLAN on the user, cascading, and network sides.
2. discard(2) -indicates that ARP packets are discarded on the user side, and only broadcast to ports inside the VLAN on the cascading and network sides.
Default: forward(1)
"
::= { hwVlanSrvProfEntry 41 }
hwIpv6NsUnicastSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based NS unicast function.
Options:
1. enable(1) -indicates that the NS unicast function is enabled.
2. disable(2) -indicates that the NS unicast function is disabled.
This leaf is optional for creating a VLAN service profile.
Default: disable(2)
"
::= { hwVlanSrvProfEntry 42 }
hwIpv6NsUnicastunkonwnpolicy OBJECT-TYPE
SYNTAX INTEGER
{
forward(1),
discard(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used for setting whether to forward or discard NS packets received from the network side when the user is offline.
It takes effect only when the NS unicast function is enabled.
Options:
1. forward(1) -indicates that NS packets are broadcast to ports inside the VLAN on the user, cascading, and network sides.
2. discard(2) -indicates that NS packets are discarded on the user side, and only broadcast to ports inside the VLAN on the cascading and network sides.
Default: forward(1)
"
::= { hwVlanSrvProfEntry 43 }
hwIgmpUserMaxVlanTag OBJECT-TYPE
SYNTAX INTEGER
{
unaware(1),
untag(2),
single(3),
double(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN-based IGMP user max VLAN tag mode.
Options:
1. unaware(1) -indicates that the maximum number of VLAN tags for the IGMP user is not concerned.
2. untag(2) -indicates that the maximum number of VLAN tags for the IGMP user is untag.
3. single(3) -indicates that the maximum number of VLAN tags for the IGMP user is one tag.
4. double(4) -indicates that the maximum number of VLAN tags for the IGMP user is two tags.
Default: unaware(1)
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 44 }
hwRouterRedirectReverse OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the Layer 2 forwarding function of reverse Router-Redirect packets.
Options:
1. enable(1) -indicates that the Layer 2 forwarding function of reverse Router-Redirect packets is enabled.
2. disable(2) -indicates that the Layer 2 forwarding function of reverse Router-Redirect packets is disabled.
This leaf is optional for creating a VLAN service profile.
"
::= { hwVlanSrvProfEntry 45 }
hwCableIPv6SourceVerify OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates VLAN-based IPv6 Source Address Verification (SAV) function for CM configured policies.
Options:
1. enable(1) -indicates that the VLAN-based IPv6 Source Address Verification for CM configured
policies are enabled.
2. disable(2) -indicates that the VLAN-based IPv6 Source Address Verification for CM configured
policies are ignored.
This leaf is optional for creating a VLAN service profile.
Default: enable(1)
"
::= { hwVlanSrvProfEntry 46 }
hwProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status, used for creating or deleting a VLAN profile.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a VLAN service profile, set hwProfileRowStatus to createAndGo(4)
to perform the set operation. The other leaves are optional.
To delete a VLAN service profile, set hwProfileRowStatus to
destroy(6) to perform the set operation.
To modify a VLAN service profile, you need not specify hwProfileRowStatus,
but perform the set operation directly on the leaf of the
corresponding attribute to be modified.
During query, the value of this leaf is the fixed active(1).
"
::= { hwVlanSrvProfEntry 255 }
hwSmartVlanIsolateSwitch OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable smart VLAN isolate-configuration.
During the creation of a VLAN service profile, if this leaf is not specified.
Options:
1. enabled(1) -indicates smart VLAN isolate-config is enabled.
2. disabled(2) -indicates smart VLAN isolate-config is disabled.
Default: enabled(1)
"
::= { hwVlanMngObject 26 }
hwVlanIpAwareTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanIpAwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Enables or disables the IP aware function of a VLAN. After the IP aware function
is enabled, the destination IP address of the IP packets forwarded in the VLAN
will be perceived and the packets will be forwarded to different gateways according
to different destination IP addresses.
The index of this table is hwVlanIpAwareVlanID.
"
::= { hwVlanMngObject 27 }
hwVlanIpAwareEntry OBJECT-TYPE
SYNTAX HwVlanIpAwareEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Enables or disables the IP aware function of a VLAN. After the IP aware function
is enabled, the destination IP address of the IP packets forwarded in the VLAN
will be perceived and the packets will be forwarded to different gateways according
to different destination IP addresses.
The index of this entry is hwVlanIpAwareVlanID.
"
INDEX { hwVlanIpAwareVlanID }
::= { hwVlanIpAwareTable 1 }
HwVlanIpAwareEntry ::=
SEQUENCE {
hwVlanIpAwareVlanID
Integer32,
hwVlanIpAwareVrfName
OCTET STRING,
hwVlanIpAwareRowStatus
RowStatus,
hwVlanIpAwareSrcIPMode
INTEGER,
hwVlanIpAwareArpSendPeriod
Integer32
}
hwVlanIpAwareVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the ID of the VLAN that needs enabling the IP aware service.
Range: 1-4093
"
::= { hwVlanIpAwareEntry 1 }
hwVlanIpAwareVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the name of the VPN instance bound to a VLAN. The default value is public network.
It is a character string and the length range is 1-31.
"
::= { hwVlanIpAwareEntry 2 }
hwVlanIpAwareRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status. It is used to enable or disable the IP aware function.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) support the set operation.
During query, active(1) is always returned for this leaf.
"
::= { hwVlanIpAwareEntry 3 }
hwVlanIpAwareSrcIPMode OBJECT-TYPE
SYNTAX INTEGER
{
clientIp(1),
virtualIp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the source IP address obtaining mode of the ARP request.
Options:
1. clientIp(1) -The source IP address obtaining mode is client IP.
2. virtualIp(2) -The source IP address obtaining mode is virtual IP.
Default: clientIp(1)
"
DEFVAL { 1 }
::= { hwVlanIpAwareEntry 4 }
hwVlanIpAwareArpSendPeriod OBJECT-TYPE
SYNTAX Integer32(5..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the period for sending ARP requests.
Range: 5-3600
Unit: second
Default: 180s
"
DEFVAL { 180 }
::= { hwVlanIpAwareEntry 5 }
hwIpAwareVirtualIPTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpAwareVirtualIPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the virtual IP address of a VLAN. After the IP aware function
of a VLAN is enabled, the VLAN needs to obtain the gateway MAC address
through the ARP request and use the configured virtual IP address as the
source IP address of the ARP request.
The indexes of this table are hwIpAwareVirtualIPVlanID,hwIpAwareVirtualIP,
and hwIpAwareVirtualIPMask.
"
::= { hwVlanMngObject 28 }
hwIpAwareVirtualIPEntry OBJECT-TYPE
SYNTAX HwIpAwareVirtualIPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the virtual IP address of a VLAN. After the IP aware function
of a VLAN is enabled, the VLAN needs to obtain the gateway MAC address
through the ARP request and use the configured virtual IP address as the
source IP address of the ARP request.
The indexes of this entry are hwIpAwareVirtualIPVlanID, hwIpAwareVirtualIP,
and hwIpAwareVirtualIPMask.
"
INDEX { hwIpAwareVirtualIPVlanID,hwIpAwareVirtualIP,hwIpAwareVirtualIPMask }
::= { hwIpAwareVirtualIPTable 1 }
HwIpAwareVirtualIPEntry ::=
SEQUENCE {
hwIpAwareVirtualIPVlanID
Integer32,
hwIpAwareVirtualIP
IpAddress,
hwIpAwareVirtualIPMask
IpAddress,
hwIpAwareVirtualIPRowStatus
RowStatus
}
hwIpAwareVirtualIPVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the table index. It is the ID of the VLAN that needs configuring a virtual IP address.
"
::= { hwIpAwareVirtualIPEntry 1 }
hwIpAwareVirtualIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the virtual IP address.
"
::= { hwIpAwareVirtualIPEntry 2 }
hwIpAwareVirtualIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the mask of the virtual IP address.
"
::= { hwIpAwareVirtualIPEntry 3 }
hwIpAwareVirtualIPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status and is used for creating or deleting an IP address.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) support the set operation.
During query, active(1) is always returned for this leaf.
"
::= { hwIpAwareVirtualIPEntry 4 }
hwIpAwareRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwIpAwareRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the dedicated static route of the IP aware service. When a VLAN whose IP aware
function is enabled is used to forward IP packets, a static route is required so that packets
with different IP address segments can be forwarded to the gateway.
The indexes of this table are hwIpAwareRouteDstIP, hwIpAwareRouteMask and hwIpAwareRouteVlanID.
"
::= { hwVlanMngObject 29 }
hwIpAwareRouteEntry OBJECT-TYPE
SYNTAX HwIpAwareRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the dedicated static route of the IP aware service. When a VLAN whose IP aware
function is enabled is used to forward IP packets, a static route is required so that packets
with different IP address segments can be forwarded to the gateway.
The indexes of this entry are hwIpAwareRouteDstIP, hwIpAwareRouteMask and hwIpAwareRouteVlanID.
"
INDEX { hwIpAwareRouteDstIP, hwIpAwareRouteMask, hwIpAwareRouteVlanID }
::= { hwIpAwareRouteTable 1 }
HwIpAwareRouteEntry ::=
SEQUENCE {
hwIpAwareRouteDstIP
IpAddress,
hwIpAwareRouteMask
IpAddress,
hwIpAwareRouteVlanID
Integer32,
hwIpAwareRouteNexthopIP
IpAddress,
hwIpAwareRouteRowStatus
RowStatus
}
hwIpAwareRouteDstIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the destination IP address of the static route. It is a table index.
"
::= { hwIpAwareRouteEntry 1 }
hwIpAwareRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the static route mask. It is a table index."
::= { hwIpAwareRouteEntry 2 }
hwIpAwareRouteVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VLAN of the static route. It is a table index.
"
::= { hwIpAwareRouteEntry 3 }
hwIpAwareRouteNexthopIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the gateway IP address of the static route.
"
::= { hwIpAwareRouteEntry 4 }
hwIpAwareRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status and is used for creating or deleting
a static route.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) are supported the set operation.
During query, active(1) is always returned for this leaf.
"
::= { hwIpAwareRouteEntry 5 }
hwVlanFlowAccountTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanFlowAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the VLAN-based traffic statistics, including the numbers of the upstream bytes,
downstream bytes, upstream packets, downstream packets, upstream and downstream packets
in the ACL-based traffic statistics collection, discarded upstream packets, and discarded
downstream packets.
The indexes of this table are hwVlanIndex (outer VLAN ID) and hwInnerVlanID (inner VLAN ID).
hwVlanIndex references the leaf in hwVlanMIBTable.
If hwInnerVlanID is -1, that means the InnerVLAN-based traffic statistics is not supported.
If hwVlanTrafficOccupiedTable is being used to query the traffic and bandwidth occupancy of
a VLAN, querying hwVlanFlowAccountTable fails.
"
::= { hwVlanMngObject 14 }
hwVlanFlowAccountEntry OBJECT-TYPE
SYNTAX HwVlanFlowAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the VLAN-based traffic statistics, including the numbers of the upstream bytes,
downstream bytes, upstream packets, downstream packets, upstream and downstream packets
in the ACL-based traffic statistics collection, discarded upstream packets, and discarded
downstream packets.
The indexes of this entry are hwVlanIndex (outer VLAN ID) and hwInnerVlanID (inner VLAN ID).
hwVlanIndex references the leaf in hwVlanMIBTable.
If hwInnerVlanID is -1, that means the InnerVLAN-based traffic statistics is not supported.
If hwVlanTrafficOccupiedTable is being used to query the traffic and bandwidth occupancy of
a VLAN, querying hwVlanFlowAccountTable fails.
"
INDEX { hwVlanIndex, hwInnerVlanID }
::= { hwVlanFlowAccountTable 1 }
HwVlanFlowAccountEntry ::=
SEQUENCE {
hwInnerVlanID
Integer32,
hwUpFlowAccountByte
Counter64,
hwDownFlowAccountByte
Counter64,
hwUpFlowAccountPacket
Counter64,
hwDownFlowAccountPacket
Counter64,
hwUpStreamPacket
Counter64,
hwDownStreamPacket
Counter64,
hwFlowAccountAdminStatus
INTEGER,
hwUpFlowAccountDiscardPacket
Counter64,
hwDownFlowAccountDiscardPacket
Counter64
}
hwInnerVlanID OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the inner VLAN tag in a stacking VLAN.
If the VLAN is not of the stacking attribute or
you perform the query operation only by the outer VLAN,
this leaf must be set to -1.
Currently, ACL-based VLAN traffic statistics of only the
outer VLAN can be collected. Therefore, this value of
this leaf is not useful, and you'd better set the value to -1.
0 is not supported.
"
::= { hwVlanFlowAccountEntry 1 }
hwUpFlowAccountByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream bytes of a VLAN.
'18446744073709551615' means invalid value."
::= { hwVlanFlowAccountEntry 2 }
hwDownFlowAccountByte OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream bytes of a VLAN.
'18446744073709551615' means invalid value."
::= { hwVlanFlowAccountEntry 3 }
hwUpFlowAccountPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets of a VLAN.
'18446744073709551615' means invalid value."
::= { hwVlanFlowAccountEntry 4 }
hwDownFlowAccountPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets of a VLAN.
'18446744073709551615' means invalid value."
::= { hwVlanFlowAccountEntry 5 }
hwUpStreamPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream packets in the
ACL-based VLAN traffic statistics collection.
After the first query, 0 is fixedly returned.
After the second query, traffic statistics of the
VLAN between the two queries are returned. If the
query or delete operation is not performed on the
traffic statistics of this VLAN within 10 minutes,
the traffic statistics collection of the VLAN is invalid.
If a new index is specified in the second query,
the traffic statistics of the new VLAN are collected.
The system can collect the traffic statistics of
a maximum of 64 VLANs concurrently.
'18446744073709551615' means invalid value."
::= { hwVlanFlowAccountEntry 6 }
hwDownStreamPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream packets in the
ACL-based VLAN traffic statistics collection.
After the first query, 0 is fixedly returned. After the second query,
traffic statistics of the VLAN between the two queries are returned.
If the query or delete operation is not performed on the traffic statistics
of this VLAN within 10 minutes, the traffic statistics collection of the VLAN is invalid.
If a new index is specified in the second query, the traffic statistics of
the new VLAN are collected. The system can collect the traffic
statistics of a maximum of 64 VLANs concurrently.
'18446744073709551615' means invalid value."
::= { hwVlanFlowAccountEntry 7 }
hwFlowAccountAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
invalid(-1),
reset(0),
resetAcl(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to delete the VLAN traffic statistics.
Options:
1. invalid(-1) -During the query, the invalid value -1 is fixedly returned.
2. reset(0) -indicates that the VLAN traffic statistics based on service board are deleted.
3. resetAcl(1) -indicates that the VLAN traffic statistics based on ACL are deleted.
"
::= { hwVlanFlowAccountEntry 8 }
hwUpFlowAccountDiscardPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of upstream discarded packets of a VLAN.
'18446744073709551615' means invalid value."
::= { hwVlanFlowAccountEntry 9 }
hwDownFlowAccountDiscardPacket OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of downstream discarded packets of a VLAN.
'18446744073709551615' means invalid value."
::= { hwVlanFlowAccountEntry 10 }
hwVlanTrafficOccupiedTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanTrafficOccupiedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the VLAN-based upstream/downstream rate statistics and bandwidth occupancy.
The indexes of this table are hwVlanIndex and hwInnerVlanID.
hwInnerVlanID must be -1, that means the InnerVLAN-based upstream/downstream rate statistics
and bandwidth occupancy are not supported.
If hwVlanFlowAccountTable is being used to query the network-side packet statistics of a VLAN,
querying hwVlanTrafficOccupiedTable fails.
"
::= { hwVlanMngObject 65005 }
hwVlanTrafficOccupiedEntry OBJECT-TYPE
SYNTAX HwVlanTrafficOccupiedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Describes the VLAN-based upstream/downstream rate statistics and bandwidth occupancy.
The indexes of this entry are hwVlanIndex and hwInnerVlanID.
hwInnerVlanID must be -1, that means the InnerVLAN-based upstream/downstream rate statistics
and bandwidth occupancy are not supported.
If hwVlanFlowAccountTable is being used to query the network-side packet statistics of a VLAN,
querying hwVlanTrafficOccupiedTable fails.
"
INDEX { hwVlanIndex, hwInnerVlanID }
::= { hwVlanTrafficOccupiedTable 1 }
HwVlanTrafficOccupiedEntry ::=
SEQUENCE {
hwVlanUplinkTraffic
Unsigned32,
hwVlanDownTraffic
Unsigned32,
hwVlanUplinkBandwidthOccupancyRate
Unsigned32,
hwVlanDownBandwidthOccupancyRate
Unsigned32
}
hwVlanUplinkTraffic OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the network-side upstream rate of a VLAN.
Unit: kbit/s
"
::= { hwVlanTrafficOccupiedEntry 1 }
hwVlanDownTraffic OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the network-side downstream rate of a VLAN.
Unit: kbit/s
"
::= { hwVlanTrafficOccupiedEntry 2 }
hwVlanUplinkBandwidthOccupancyRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the upstream bandwidth occupancy of a VLAN, indicated in percentage.
"
::= { hwVlanTrafficOccupiedEntry 3 }
hwVlanDownBandwidthOccupancyRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the downstream bandwidth occupancy of a VLAN, indicated in percentage.
"
::= { hwVlanTrafficOccupiedEntry 4 }
hwMplsVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwMplsVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates information for MPLS VLAN.
The index of this table is hwVlanIndex.
"
::= { hwVlanMngObject 65006 }
hwMplsVlanEntry OBJECT-TYPE
SYNTAX HwMplsVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates information for MPLS VLAN.
The index of this entry is hwVlanIndex.
"
INDEX { hwVlanIndex }
::= { hwMplsVlanTable 1 }
HwMplsVlanEntry ::=
SEQUENCE {
hwMplsVlanEnable
INTEGER
}
hwMplsVlanEnable OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MPLS function of a VLAN
Options:
1. enable(1) - enable the MPLS function of a VLAN.
2. disable(2) - disable the MPLS function of a VLAN."
::= { hwMplsVlanEntry 1 }
hwVlanConnectTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVlanConnectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the VLAN Connect table.
The indexes of this table are hwVlanConnectOuterVlanID and hwVlanConnectInnerVlanID.
"
::= { hwVlanMngObject 65007 }
hwVlanConnectEntry OBJECT-TYPE
SYNTAX HwVlanConnectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configures the VLAN Connect table.
The indexes of this entry are hwVlanConnectOuterVlanID and hwVlanConnectInnerVlanID.
"
INDEX { hwVlanConnectOuterVlanID, hwVlanConnectInnerVlanID }
::= { hwVlanConnectTable 1 }
HwVlanConnectEntry ::=
SEQUENCE {
hwVlanConnectOuterVlanID
Integer32,
hwVlanConnectInnerVlanID
Integer32,
hwVlanConnectSrcType
INTEGER,
hwVlanConnectSrcPara
Integer32,
hwVlanConnectDstType
INTEGER,
hwVlanConnectDstPara
Integer32,
hwVlanConnectRowStatus
RowStatus
}
hwVlanConnectOuterVlanID OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the outer VLAN of the VLAN-connect item. It is a table index.
"
::= { hwVlanConnectEntry 1 }
hwVlanConnectInnerVlanID OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the inner VLAN of the VLAN-connect item. It is a table index.
"
::= { hwVlanConnectEntry 2 }
hwVlanConnectSrcType OBJECT-TYPE
SYNTAX INTEGER
{
port(1),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the source point type of VLAN Connect table.
Options:
1. port(1) -indicates that hwVlanConnectSrcPara is ifindex.
2. invalid(-1) -indicates that hwVlanConnectSrcPara is invalid.
"
::= { hwVlanConnectEntry 3 }
hwVlanConnectSrcPara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the source point value of VLAN Connect table.
If hwVlanConnectSrcType is equal to invalid(-1), this leaf indicates invalid.
If hwVlanConnectSrcType is equal to port(1), this leaf indicates ifindex.
"
::= { hwVlanConnectEntry 4 }
hwVlanConnectDstType OBJECT-TYPE
SYNTAX INTEGER
{
port(1),
flow(2),
bundle(3),
invalid(-1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the source point type of VLAN-connect table.
Options:
1. port(1) -indicates that hwVlanConnectDstPara is ifindex.
2. flow(2) -indicates that hwVlanConnectDstPara is flow index.
3. bundle(3) -indicates that hwVlanConnectDstPara is bundle index.
4. invalid(-1) -indicates that hwVlanConnectDstPara is invalid.
"
::= { hwVlanConnectEntry 5 }
hwVlanConnectDstPara OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the source point value of VLAN-connect table.
If hwVlanConnectDstType is equal to invalid(-1), this leaf indicates invalid.
If hwVlanConnectDstType is equal to port(1), this leaf indicates ifindex.
If hwVlanConnectDstType is equal to flow(2), this leaf indicates flow index.
If hwVlanConnectDstType is equal to bundle(3), this leaf indicates bundle index.
"
::= { hwVlanConnectEntry 6 }
hwVlanConnectRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the row status and is used for creating or deleting VLAN-connect item.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
Only options createAndGo(4) and destroy(6) are supported the set operation.
During query, active(1) is always returned for this leaf.
"
::= { hwVlanConnectEntry 255 }
hwDoubleTagTunnelConfig OBJECT IDENTIFIER ::= { hwVlanMngObject 65008 }
hwDoubleTagTunnelIgmp OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch the double tag tunnel function of IGMP packet.
Options:
1. enable(1) -Enable the double-tag tunnel function of IGMP packet.
2. disable(2) -Disable the double-tag tunnel function of IGMP packet.
The default value is disable(2).
"
::= { hwDoubleTagTunnelConfig 1 }
hwDoubleTagTunnelRip OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch the double tag tunnel function of RIP packet.
Options:
1. enable(1) -Enable the double-tag tunnel function of RIP packet.
2. disable(2) -Disable the double-tag tunnel function of RIP packet.
The default value is disable(2).
"
::= { hwDoubleTagTunnelConfig 2 }
hwDoubleTagTunnelDhcp OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Switch the double tag tunnel function of DHCP packet.
Options:
1. enable(1) -Enable the double-tag tunnel function of DHCP packet.
2. disable(2) -Disable the double-tag tunnel function of DHCP packet.
The default value is disable(2).
"
::= { hwDoubleTagTunnelConfig 3 }
hwDocsSrvVlanIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDocsSrvVlanIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This is the service svlan of DOCSIS table.
This table is used to configure the service svlan of DOCSIS service board.
The indexes of this table are hwFrameIndex and hwSlotIndex.
"
::= { hwVlanMngObject 65009 }
hwDocsSrvVlanIDEntry OBJECT-TYPE
SYNTAX HwDocsSrvVlanIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This is the service svlan of DOCSIS table.
This table is used to configure the service svlan of DOCSIS service board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
"
INDEX { hwFrameIndex, hwSlotIndex }
::= { hwDocsSrvVlanIDTable 1 }
HwDocsSrvVlanIDEntry ::=
SEQUENCE {
hwDocsSrvVlanID
Integer32,
hwDocsSrvVlanRowStatus
RowStatus
}
hwDocsSrvVlanID OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the service svlan of DOCSIS service board.
Range: 1-4093.
-1 indicates that hwDocsSrvVlanID is invalid.
"
::= { hwDocsSrvVlanIDEntry 1 }
hwDocsSrvVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"
Indicates the row status, used for creating or deleting a service VLAN of DOCSIS service board.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
To create a service VLAN, you must specify hwDocsSrvVlanID and set
hwDocsSrvVlanRowStatus to createAndGo(4) to perform the set operation.
To delete a VLAN, set hwDocsSrvVlanRowStatus to destroy(6) to perform the set operation.
During query, the value of this leaf is the fixed active(1).
"
::= { hwDocsSrvVlanIDEntry 2 }
hwVOIPDhcpQosTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwVOIPDhcpQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the Qos IP tos and VLAN priority.
The indexes of this table are hwVOIPDhcpVlanID and hwVOIPDhcpQosType.
"
::= { hwVlanMngObject 35 }
hwVOIPDhcpQosEntry OBJECT-TYPE
SYNTAX HwVOIPDhcpQosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the Qos IP tos and VLAN priority.
The indexes of this entry are hwVOIPDhcpVlanID and hwVOIPDhcpQosType.
"
INDEX { hwVOIPDhcpVlanID, hwVOIPDhcpQosType }
::= { hwVOIPDhcpQosTable 1 }
HwVOIPDhcpQosEntry ::=
SEQUENCE {
hwVOIPDhcpVlanID
Integer32,
hwVOIPDhcpQosType
Integer32,
hwVOIPDhcpQosIPTos
Integer32,
hwVOIPDhcpQosIPDscp
Integer32,
hwVOIPDhcpQosVlanPriority
Integer32,
hwVOIPDhcpQosRowStatus
RowStatus
}
hwVOIPDhcpVlanID OBJECT-TYPE
SYNTAX Integer32 (1..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the service VLAN.
Range: 1-4093.
"
::= { hwVOIPDhcpQosEntry 1 }
hwVOIPDhcpQosType OBJECT-TYPE
SYNTAX Integer32 ( 0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Indicates the type of QOS.
The value 0 indicates that the type of QOS is signaling.
The value 1 indicates that the type of QOS is media.
"
::= { hwVOIPDhcpQosEntry 2 }
hwVOIPDhcpQosIPTos OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the Qos value of tos.
Range: -1, 0-255.
-1 indicates that the Qos value is invalid.
"
::= { hwVOIPDhcpQosEntry 3 }
hwVOIPDhcpQosIPDscp OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the Qos value of dscp.
Range: -1, 0-255.
-1 indicates that the Qos value is invalid.
"
::= { hwVOIPDhcpQosEntry 4 }
hwVOIPDhcpQosVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Indicates the Qos VLAN priority.
Range: 0-7.
"
::= { hwVOIPDhcpQosEntry 5 }
hwVOIPDhcpQosRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the status of this conceptual row.
Options:
1. active(1)
2. createAndGo(4)
3. destroy(6)
"
::= { hwVOIPDhcpQosEntry 6 }
hwMethNativeVlan OBJECT-TYPE
SYNTAX Integer32 (-1 | 2..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the MEth native VLAN.
Range: -1, 2-4093
In the set case, -1 indicates delete the MEth native VLAN, 2-4093 indicates set the MEth native VLAN.
In the get case, when the MEth native VLAN is not set, -1 is returned, otherwise the MEth native VLAN is returned.
Default: -1
"
::= { hwVlanMngObject 65010 }
hwVlanInterfaceTrapsVbOids OBJECT IDENTIFIER ::= { hwVlanMngObject 30 }
hwL3InterfaceType
OBJECT-TYPE SYNTAX INTEGER
{
vlanif(1),
meth(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Describes layer 3 interface type.
Options:
1. vlanif(1) -VLAN interface.
2. meth(2) -Meth interface.
"
::= { hwVlanInterfaceTrapsVbOids 1 }
hwVlanifTraps OBJECT IDENTIFIER ::= { hwVlanMngObject 31 }
hwVlanifCommonTraps OBJECT IDENTIFIER ::= { hwVlanifTraps 1 }
hwVlanifAlarmTraps OBJECT IDENTIFIER ::= { hwVlanifTraps 2 }
hwVlanifAlarmTrapsPrefix OBJECT IDENTIFIER ::= { hwVlanifAlarmTraps 0 }
hwVlanifUpTrap NOTIFICATION-TYPE
OBJECTS {
hwL3InterfaceType,
hwVlanID
}
STATUS current
DESCRIPTION
"This notification is generated when the Layer-3 interface
link is in the up state.
"
::= { hwVlanifAlarmTraps 0 1 }
hwVlanifDownTrap NOTIFICATION-TYPE
OBJECTS {
hwL3InterfaceType,
hwVlanID
}
STATUS current
DESCRIPTION
"This notification is generated when the Layer-3 interface
link is in the down state.
"
::= { hwVlanifAlarmTraps 0 2 }
hwVlanCfgTrapsVbOids OBJECT IDENTIFIER ::= { hwVlanMngObject 32 }
hwVlanList
OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..256))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Related VLAN ID list information of the VLAN profile."
::= { hwVlanCfgTrapsVbOids 1 }
hwVlanSrvProfOperType OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
modify(2),
delete(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The operate type of the VLAN service profile.
Options:
1. add(1) -Add a VLAN service profile.
2. modify(2) -Modify a VLAN service profile.
3. delete(3) -Delete a VLAN service profile.
"
::= { hwVlanCfgTrapsVbOids 2 }
hwVlanListType OBJECT-TYPE
SYNTAX INTEGER
{
superVlan(1),
commonVlan(2),
subVlan(3),
primaryVlan(4),
secondaryVlan(5),
regionVlan(6),
smartVlan(7),
muxVlan(8),
multiVlan(9)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the type of VLAN list.
Options:
1. superVlan(1) -indicates super VLAN.
2. commonVlan(2) -indicates common VLAN.
3. subVlan(3) -indicates sub VLAN, the value is not supported.
4. primaryVlan(4) -indicates primary VLAN, the value is not supported.
5. secondaryVlan(5) -indicates secondary VLAN, the value is not supported.
6. regionVlan(6) -indicates region VLAN, the value is not supported.
7. smartVlan(7) -indicates smart VLAN.
8. muxVlan(8) -indicates MUX VLAN.
9. multiVlan(9) -indicates multi VLAN.
"
::= { hwVlanCfgTrapsVbOids 3 }
hwVlanListAttrib OBJECT-TYPE
SYNTAX INTEGER
{
common(1),
qinq(2),
stacking(3),
subVlan(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Indicates the attribute of VLAN list.
Options:
1. common(1) -indicates common VLAN.
2. qinq(2) -indicates QinQ VLAN.
3. stacking(3) -indicates stacking VLAN.
4. subVlan(4) -indicates sub VLAN.
"
::= { hwVlanCfgTrapsVbOids 4 }
hwVlanCfgTraps OBJECT IDENTIFIER ::= { hwVlanMngObject 33 }
hwVlanCfgCommonTraps OBJECT IDENTIFIER ::= { hwVlanCfgTraps 1 }
hwVlanCfgCommonTrapsPrefix OBJECT IDENTIFIER ::= { hwVlanCfgCommonTraps 0 }
hwVlanNameChangeInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwVlanIndex,
hwVlanName
}
STATUS current
DESCRIPTION
"The trap to be sent when the VLAN description is changed."
::= { hwVlanCfgCommonTraps 0 1 }
hwVlanForwardingModeInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwVlanIndex,
hwVlanForwarding
}
STATUS current
DESCRIPTION
"The trap to be sent when the VLAN forwarding mode is changed."
::= { hwVlanCfgCommonTraps 0 2 }
hwVlanSrvProfChageInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwVlanSrvProfName,
hwVlanSrvProfOperType
}
STATUS current
DESCRIPTION
"The trap to be sent when the VLAN profile is configured."
::= { hwVlanCfgCommonTraps 0 3 }
hwVlanAndVlanSrvProfOperInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwVlanList,
hwVlanSrvProfName
}
STATUS current
DESCRIPTION
"The trap to be sent when a VLAN profile is bound to or unbound from a VLAN."
::= { hwVlanCfgCommonTraps 0 4 }
hwVlanAddInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwVlanList,
hwVlanListType,
hwVlanListAttrib
}
STATUS current
DESCRIPTION
"The trap to be sent when VLANs are added."
::= { hwVlanCfgCommonTraps 0 5 }
hwVlanDelInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwVlanList
}
STATUS current
DESCRIPTION
"The trap to be sent when VLANs are deleted."
::= { hwVlanCfgCommonTraps 0 6 }
hwVlanAttrChangedInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwVlanList,
hwVlanListAttrib
}
STATUS current
DESCRIPTION
"The trap to be sent when the attribute of VLANs are changed."
::= { hwVlanCfgCommonTraps 0 7 }
hwPortVlanChangedInfoTrap NOTIFICATION-TYPE
OBJECTS {
hwConfigChangeIP,
hwVlanList
}
STATUS current
DESCRIPTION
"The trap to be sent when the list of the standard ports in VLANs are changed."
::= { hwVlanCfgCommonTraps 0 8 }
END