From 91e267bcc42442d4e9da09aab30065ad5d44025a Mon Sep 17 00:00:00 2001 From: David Madison Date: Fri, 15 Feb 2019 12:37:45 -0500 Subject: [PATCH] Remove non-USB boards Removes boards from boards.txt, bootloaders for those boards, and variants for those boards. As none of these boards support USB there's no reason to keep them around. --- boards.txt | 597 - bootloaders/atmega/ATmegaBOOT_168.c | 1057 -- .../atmega/ATmegaBOOT_168_atmega1280.hex | 245 - .../atmega/ATmegaBOOT_168_atmega328.hex | 125 - .../ATmegaBOOT_168_atmega328_pro_8MHz.hex | 124 - .../atmega/ATmegaBOOT_168_diecimila.hex | 126 - bootloaders/atmega/ATmegaBOOT_168_ng.hex | 110 - .../atmega/ATmegaBOOT_168_pro_8MHz.hex | 126 - bootloaders/atmega/Makefile | 238 - .../ATmegaBOOT-prod-firmware-2009-11-07.hex | 66 - bootloaders/atmega8/ATmegaBOOT.c | 507 - bootloaders/atmega8/ATmegaBOOT.hex | 62 - bootloaders/atmega8/ATmegaBOOT.txt | 4 - bootloaders/atmega8/Makefile | 88 - bootloaders/bt/ATmegaBOOT_168.c | 1043 -- bootloaders/bt/ATmegaBOOT_168.hex | 121 - .../bt/ATmegaBOOT_168_atmega328_bt.hex | 162 - bootloaders/bt/Makefile | 108 - bootloaders/gemma/README.md | 14 - bootloaders/gemma/avrdude.conf | 14389 ---------------- bootloaders/gemma/gemma_v1.hex | 182 - bootloaders/gemma/usbconfig.h | 351 - bootloaders/gemma/usbconfig.patch | 24 - bootloaders/lilypad/LilyPadBOOT_168.hex | 117 - bootloaders/lilypad/src/ATmegaBOOT.c | 977 -- bootloaders/lilypad/src/Makefile | 83 - bootloaders/optiboot/Makefile | 450 - bootloaders/optiboot/README.TXT | 81 - bootloaders/optiboot/boot.h | 846 - bootloaders/optiboot/makeall | 20 - bootloaders/optiboot/omake | 2 - bootloaders/optiboot/omake.bat | 1 - bootloaders/optiboot/optiboot.c | 672 - bootloaders/optiboot/optiboot_atmega168.hex | 35 - bootloaders/optiboot/optiboot_atmega168.lst | 598 - .../optiboot/optiboot_atmega328-Mini.hex | 33 - bootloaders/optiboot/optiboot_atmega328.hex | 35 - bootloaders/optiboot/optiboot_atmega328.lst | 598 - bootloaders/optiboot/optiboot_atmega8.hex | 33 - bootloaders/optiboot/optiboot_atmega8.lst | 604 - bootloaders/optiboot/pin_defs.h | 80 - bootloaders/optiboot/stk500.h | 39 - bootloaders/stk500v2/License.txt | 280 - bootloaders/stk500v2/Makefile | 587 - .../Mega2560-prod-firmware-2011-06-29.hex | 513 - bootloaders/stk500v2/STK500V2.pnproj | 1 - bootloaders/stk500v2/STK500V2.pnps | 1 - bootloaders/stk500v2/avr_cpunames.h | 189 - bootloaders/stk500v2/avrinterruptnames.h | 1040 -- bootloaders/stk500v2/command.h | 114 - bootloaders/stk500v2/stk500boot.c | 2122 --- bootloaders/stk500v2/stk500boot.ppg | 1 - .../stk500v2/stk500boot_v2_mega2560.hex | 469 - variants/eightanaloginputs/pins_arduino.h | 25 - variants/ethernet/pins_arduino.h | 254 - variants/gemma/pins_arduino.h | 140 - variants/mega/pins_arduino.h | 413 - variants/standard/pins_arduino.h | 254 - 58 files changed, 31576 deletions(-) delete mode 100644 bootloaders/atmega/ATmegaBOOT_168.c delete mode 100644 bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex delete mode 100644 bootloaders/atmega/ATmegaBOOT_168_atmega328.hex delete mode 100644 bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex delete mode 100644 bootloaders/atmega/ATmegaBOOT_168_diecimila.hex delete mode 100644 bootloaders/atmega/ATmegaBOOT_168_ng.hex delete mode 100644 bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex delete mode 100755 bootloaders/atmega/Makefile delete mode 100644 bootloaders/atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex delete mode 100644 bootloaders/atmega8/ATmegaBOOT.c delete mode 100644 bootloaders/atmega8/ATmegaBOOT.hex delete mode 100644 bootloaders/atmega8/ATmegaBOOT.txt delete mode 100644 bootloaders/atmega8/Makefile delete mode 100644 bootloaders/bt/ATmegaBOOT_168.c delete mode 100644 bootloaders/bt/ATmegaBOOT_168.hex delete mode 100644 bootloaders/bt/ATmegaBOOT_168_atmega328_bt.hex delete mode 100644 bootloaders/bt/Makefile delete mode 100644 bootloaders/gemma/README.md delete mode 100644 bootloaders/gemma/avrdude.conf delete mode 100644 bootloaders/gemma/gemma_v1.hex delete mode 100644 bootloaders/gemma/usbconfig.h delete mode 100644 bootloaders/gemma/usbconfig.patch delete mode 100644 bootloaders/lilypad/LilyPadBOOT_168.hex delete mode 100644 bootloaders/lilypad/src/ATmegaBOOT.c delete mode 100644 bootloaders/lilypad/src/Makefile delete mode 100644 bootloaders/optiboot/Makefile delete mode 100644 bootloaders/optiboot/README.TXT delete mode 100644 bootloaders/optiboot/boot.h delete mode 100755 bootloaders/optiboot/makeall delete mode 100644 bootloaders/optiboot/omake delete mode 100644 bootloaders/optiboot/omake.bat delete mode 100644 bootloaders/optiboot/optiboot.c delete mode 100644 bootloaders/optiboot/optiboot_atmega168.hex delete mode 100644 bootloaders/optiboot/optiboot_atmega168.lst delete mode 100644 bootloaders/optiboot/optiboot_atmega328-Mini.hex delete mode 100644 bootloaders/optiboot/optiboot_atmega328.hex delete mode 100644 bootloaders/optiboot/optiboot_atmega328.lst delete mode 100644 bootloaders/optiboot/optiboot_atmega8.hex delete mode 100644 bootloaders/optiboot/optiboot_atmega8.lst delete mode 100644 bootloaders/optiboot/pin_defs.h delete mode 100644 bootloaders/optiboot/stk500.h delete mode 100644 bootloaders/stk500v2/License.txt delete mode 100644 bootloaders/stk500v2/Makefile delete mode 100644 bootloaders/stk500v2/Mega2560-prod-firmware-2011-06-29.hex delete mode 100644 bootloaders/stk500v2/STK500V2.pnproj delete mode 100644 bootloaders/stk500v2/STK500V2.pnps delete mode 100644 bootloaders/stk500v2/avr_cpunames.h delete mode 100644 bootloaders/stk500v2/avrinterruptnames.h delete mode 100644 bootloaders/stk500v2/command.h delete mode 100644 bootloaders/stk500v2/stk500boot.c delete mode 100644 bootloaders/stk500v2/stk500boot.ppg delete mode 100644 bootloaders/stk500v2/stk500boot_v2_mega2560.hex delete mode 100644 variants/eightanaloginputs/pins_arduino.h delete mode 100644 variants/ethernet/pins_arduino.h delete mode 100644 variants/gemma/pins_arduino.h delete mode 100644 variants/mega/pins_arduino.h delete mode 100644 variants/standard/pins_arduino.h diff --git a/boards.txt b/boards.txt index e2f3707c..7fa74a5a 100644 --- a/boards.txt +++ b/boards.txt @@ -46,239 +46,6 @@ yun.build.extra_flags={build.usb_flags} ############################################################## -uno.name=Arduino/Genuino Uno - -uno.vid.0=0x2341 -uno.pid.0=0x0043 -uno.vid.1=0x2341 -uno.pid.1=0x0001 -uno.vid.2=0x2A03 -uno.pid.2=0x0043 -uno.vid.3=0x2341 -uno.pid.3=0x0243 - -uno.upload.tool=avrdude -uno.upload.protocol=arduino -uno.upload.maximum_size=32256 -uno.upload.maximum_data_size=2048 -uno.upload.speed=115200 - -uno.bootloader.tool=avrdude -uno.bootloader.low_fuses=0xFF -uno.bootloader.high_fuses=0xDE -uno.bootloader.extended_fuses=0xFD -uno.bootloader.unlock_bits=0x3F -uno.bootloader.lock_bits=0x0F -uno.bootloader.file=optiboot/optiboot_atmega328.hex - -uno.build.mcu=atmega328p -uno.build.f_cpu=16000000L -uno.build.board=AVR_UNO -uno.build.core=arduino -uno.build.variant=standard - -############################################################## - -diecimila.name=Arduino Duemilanove or Diecimila - -diecimila.upload.tool=avrdude -diecimila.upload.protocol=arduino - -diecimila.bootloader.tool=avrdude -diecimila.bootloader.low_fuses=0xFF -diecimila.bootloader.unlock_bits=0x3F -diecimila.bootloader.lock_bits=0x0F - -diecimila.build.f_cpu=16000000L -diecimila.build.board=AVR_DUEMILANOVE -diecimila.build.core=arduino -diecimila.build.variant=standard - -## Arduino Duemilanove or Diecimila w/ ATmega328P -## ---------------------------------------------- -diecimila.menu.cpu.atmega328=ATmega328P - -diecimila.menu.cpu.atmega328.upload.maximum_size=30720 -diecimila.menu.cpu.atmega328.upload.maximum_data_size=2048 -diecimila.menu.cpu.atmega328.upload.speed=57600 - -diecimila.menu.cpu.atmega328.bootloader.high_fuses=0xDA -diecimila.menu.cpu.atmega328.bootloader.extended_fuses=0xFD -diecimila.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex - -diecimila.menu.cpu.atmega328.build.mcu=atmega328p - -## Arduino Duemilanove or Diecimila w/ ATmega168 -## --------------------------------------------- -diecimila.menu.cpu.atmega168=ATmega168 - -diecimila.menu.cpu.atmega168.upload.maximum_size=14336 -diecimila.menu.cpu.atmega168.upload.maximum_data_size=1024 -diecimila.menu.cpu.atmega168.upload.speed=19200 - -diecimila.menu.cpu.atmega168.bootloader.high_fuses=0xdd -diecimila.menu.cpu.atmega168.bootloader.extended_fuses=0xF8 -diecimila.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex - -diecimila.menu.cpu.atmega168.build.mcu=atmega168 - -############################################################## - -nano.name=Arduino Nano - -nano.upload.tool=avrdude -nano.upload.protocol=arduino - -nano.bootloader.tool=avrdude -nano.bootloader.unlock_bits=0x3F -nano.bootloader.lock_bits=0x0F - -nano.build.f_cpu=16000000L -nano.build.board=AVR_NANO -nano.build.core=arduino -nano.build.variant=eightanaloginputs - -## Arduino Nano w/ ATmega328P -## -------------------------- -nano.menu.cpu.atmega328=ATmega328P - -nano.menu.cpu.atmega328.upload.maximum_size=30720 -nano.menu.cpu.atmega328.upload.maximum_data_size=2048 -nano.menu.cpu.atmega328.upload.speed=115200 - -nano.menu.cpu.atmega328.bootloader.low_fuses=0xFF -nano.menu.cpu.atmega328.bootloader.high_fuses=0xDA -nano.menu.cpu.atmega328.bootloader.extended_fuses=0xFD -nano.menu.cpu.atmega328.bootloader.file=optiboot/optiboot_atmega328.hex - -nano.menu.cpu.atmega328.build.mcu=atmega328p - -## Arduino Nano w/ ATmega328P (old bootloader) -## -------------------------- -nano.menu.cpu.atmega328old=ATmega328P (Old Bootloader) - -nano.menu.cpu.atmega328old.upload.maximum_size=30720 -nano.menu.cpu.atmega328old.upload.maximum_data_size=2048 -nano.menu.cpu.atmega328old.upload.speed=57600 - -nano.menu.cpu.atmega328old.bootloader.low_fuses=0xFF -nano.menu.cpu.atmega328old.bootloader.high_fuses=0xDA -nano.menu.cpu.atmega328old.bootloader.extended_fuses=0xFD -nano.menu.cpu.atmega328old.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex - -nano.menu.cpu.atmega328old.build.mcu=atmega328p - -## Arduino Nano w/ ATmega168 -## ------------------------- -nano.menu.cpu.atmega168=ATmega168 - -nano.menu.cpu.atmega168.upload.maximum_size=14336 -nano.menu.cpu.atmega168.upload.maximum_data_size=1024 -nano.menu.cpu.atmega168.upload.speed=19200 - -nano.menu.cpu.atmega168.bootloader.low_fuses=0xff -nano.menu.cpu.atmega168.bootloader.high_fuses=0xdd -nano.menu.cpu.atmega168.bootloader.extended_fuses=0xF8 -nano.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex - -nano.menu.cpu.atmega168.build.mcu=atmega168 - -############################################################## - -mega.name=Arduino/Genuino Mega or Mega 2560 - -mega.vid.0=0x2341 -mega.pid.0=0x0010 -mega.vid.1=0x2341 -mega.pid.1=0x0042 -mega.vid.2=0x2A03 -mega.pid.2=0x0010 -mega.vid.3=0x2A03 -mega.pid.3=0x0042 -mega.vid.4=0x2341 -mega.pid.4=0x0210 -mega.vid.5=0x2341 -mega.pid.5=0x0242 - -mega.upload.tool=avrdude -mega.upload.maximum_data_size=8192 - -mega.bootloader.tool=avrdude -mega.bootloader.low_fuses=0xFF -mega.bootloader.unlock_bits=0x3F -mega.bootloader.lock_bits=0x0F - -mega.build.f_cpu=16000000L -mega.build.core=arduino -mega.build.variant=mega -# default board may be overridden by the cpu menu -mega.build.board=AVR_MEGA2560 - -## Arduino/Genuino Mega w/ ATmega2560 -## ------------------------- -mega.menu.cpu.atmega2560=ATmega2560 (Mega 2560) - -mega.menu.cpu.atmega2560.upload.protocol=wiring -mega.menu.cpu.atmega2560.upload.maximum_size=253952 -mega.menu.cpu.atmega2560.upload.speed=115200 - -mega.menu.cpu.atmega2560.bootloader.high_fuses=0xD8 -mega.menu.cpu.atmega2560.bootloader.extended_fuses=0xFD -mega.menu.cpu.atmega2560.bootloader.file=stk500v2/stk500boot_v2_mega2560.hex - -mega.menu.cpu.atmega2560.build.mcu=atmega2560 -mega.menu.cpu.atmega2560.build.board=AVR_MEGA2560 - -## Arduino Mega w/ ATmega1280 -## ------------------------- -mega.menu.cpu.atmega1280=ATmega1280 - -mega.menu.cpu.atmega1280.upload.protocol=arduino -mega.menu.cpu.atmega1280.upload.maximum_size=126976 -mega.menu.cpu.atmega1280.upload.speed=57600 - -mega.menu.cpu.atmega1280.bootloader.high_fuses=0xDA -mega.menu.cpu.atmega1280.bootloader.extended_fuses=0xF5 -mega.menu.cpu.atmega1280.bootloader.file=atmega/ATmegaBOOT_168_atmega1280.hex - -mega.menu.cpu.atmega1280.build.mcu=atmega1280 -mega.menu.cpu.atmega1280.build.board=AVR_MEGA - -############################################################## - -megaADK.name=Arduino Mega ADK - -megaADK.vid.0=0x2341 -megaADK.pid.0=0x003f -megaADK.vid.1=0x2341 -megaADK.pid.1=0x0044 -megaADK.vid.2=0x2A03 -megaADK.pid.2=0x003f -megaADK.vid.3=0x2A03 -megaADK.pid.3=0x0044 - -megaADK.upload.tool=avrdude -megaADK.upload.protocol=wiring -megaADK.upload.maximum_size=253952 -megaADK.upload.maximum_data_size=8192 -megaADK.upload.speed=115200 - -megaADK.bootloader.tool=avrdude -megaADK.bootloader.low_fuses=0xFF -megaADK.bootloader.high_fuses=0xD8 -megaADK.bootloader.extended_fuses=0xFD -megaADK.bootloader.file=stk500v2/stk500boot_v2_mega2560.hex -megaADK.bootloader.unlock_bits=0x3F -megaADK.bootloader.lock_bits=0x0F - -megaADK.build.mcu=atmega2560 -megaADK.build.f_cpu=16000000L -megaADK.build.board=AVR_ADK -megaADK.build.core=arduino -megaADK.build.variant=mega - -############################################################## - leonardo.name=Arduino Leonardo leonardo.vid.0=0x2341 leonardo.pid.0=0x0036 @@ -450,142 +217,6 @@ esplora.build.extra_flags={build.usb_flags} ############################################################## -mini.name=Arduino Mini - -mini.upload.tool=avrdude -mini.upload.protocol=arduino - -mini.bootloader.tool=avrdude -mini.bootloader.low_fuses=0xff -mini.bootloader.unlock_bits=0x3F -mini.bootloader.lock_bits=0x0F - -mini.build.f_cpu=16000000L -mini.build.board=AVR_MINI -mini.build.core=arduino -mini.build.variant=eightanaloginputs - -## Arduino Mini w/ ATmega328P -## -------------------------- -mini.menu.cpu.atmega328=ATmega328P - -mini.menu.cpu.atmega328.upload.maximum_size=28672 -mini.menu.cpu.atmega328.upload.maximum_data_size=2048 -mini.menu.cpu.atmega328.upload.speed=115200 - -mini.menu.cpu.atmega328.bootloader.high_fuses=0xd8 -mini.menu.cpu.atmega328.bootloader.extended_fuses=0xFD -mini.menu.cpu.atmega328.bootloader.file=optiboot/optiboot_atmega328-Mini.hex - -mini.menu.cpu.atmega328.build.mcu=atmega328p - -## Arduino Mini w/ ATmega168 -## ------------------------- -mini.menu.cpu.atmega168=ATmega168 - -mini.menu.cpu.atmega168.upload.maximum_size=14336 -mini.menu.cpu.atmega168.upload.maximum_data_size=1024 -mini.menu.cpu.atmega168.upload.speed=19200 - -mini.menu.cpu.atmega168.bootloader.high_fuses=0xdd -mini.menu.cpu.atmega168.bootloader.extended_fuses=0xF8 -mini.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_ng.hex - -mini.menu.cpu.atmega168.build.mcu=atmega168 - -############################################################## - -ethernet.name=Arduino Ethernet - -ethernet.upload.tool=avrdude -ethernet.upload.protocol=arduino -ethernet.upload.maximum_size=32256 -ethernet.upload.maximum_data_size=2048 -ethernet.upload.speed=115200 - -ethernet.bootloader.tool=avrdude -ethernet.bootloader.low_fuses=0xff -ethernet.bootloader.high_fuses=0xde -ethernet.bootloader.extended_fuses=0xFD -ethernet.bootloader.file=optiboot/optiboot_atmega328.hex -ethernet.bootloader.unlock_bits=0x3F -ethernet.bootloader.lock_bits=0x0F - -ethernet.build.variant=ethernet -ethernet.build.mcu=atmega328p -ethernet.build.f_cpu=16000000L -ethernet.build.board=AVR_ETHERNET -ethernet.build.core=arduino - -############################################################## - -fio.name=Arduino Fio - -fio.upload.tool=avrdude -fio.upload.protocol=arduino -fio.upload.maximum_size=30720 -fio.upload.maximum_data_size=2048 -fio.upload.speed=57600 - -fio.bootloader.tool=avrdude -fio.bootloader.low_fuses=0xFF -fio.bootloader.high_fuses=0xDA -fio.bootloader.extended_fuses=0xFD -fio.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex -fio.bootloader.unlock_bits=0x3F -fio.bootloader.lock_bits=0x0F - -fio.build.mcu=atmega328p -fio.build.f_cpu=8000000L -fio.build.board=AVR_FIO -fio.build.core=arduino -fio.build.variant=eightanaloginputs - -############################################################## - -bt.name=Arduino BT - -bt.upload.tool=avrdude -bt.upload.protocol=arduino -bt.upload.speed=19200 -bt.upload.disable_flushing=true - -bt.bootloader.tool=avrdude -bt.bootloader.low_fuses=0xff -bt.bootloader.unlock_bits=0x3F -bt.bootloader.lock_bits=0x0F - -bt.build.f_cpu=16000000L -bt.build.board=AVR_BT -bt.build.core=arduino -bt.build.variant=eightanaloginputs - -## Arduino BT w/ ATmega328P -## ------------------------ -bt.menu.cpu.atmega328=ATmega328P -bt.menu.cpu.atmega328.upload.maximum_size=28672 -bt.menu.cpu.atmega328.upload.maximum_data_size=2048 - -bt.menu.cpu.atmega328.bootloader.high_fuses=0xd8 -bt.menu.cpu.atmega328.bootloader.extended_fuses=0xFD -bt.menu.cpu.atmega328.bootloader.file=bt/ATmegaBOOT_168_atmega328_bt.hex - -bt.menu.cpu.atmega328.build.mcu=atmega328p - -## Arduino BT w/ ATmega168 -## ----------------------- -bt.menu.cpu.atmega168=ATmega168 -bt.menu.cpu.atmega168.upload.maximum_size=14336 -bt.menu.cpu.atmega168.upload.maximum_data_size=1024 - -bt.menu.cpu.atmega168.bootloader.high_fuses=0xdd -bt.menu.cpu.atmega168.bootloader.extended_fuses=0xF8 -bt.menu.cpu.atmega168.bootloader.file=bt/ATmegaBOOT_168.hex - -bt.menu.cpu.atmega168.build.mcu=atmega168 - -############################################################## - LilyPadUSB.name=LilyPad Arduino USB LilyPadUSB.vid.0=0x1B4F LilyPadUSB.pid.0=0x9207 @@ -621,177 +252,6 @@ LilyPadUSB.build.extra_flags={build.usb_flags} ############################################################## -lilypad.name=LilyPad Arduino - -lilypad.upload.tool=avrdude -lilypad.upload.protocol=arduino - -lilypad.bootloader.tool=avrdude -lilypad.bootloader.unlock_bits=0x3F -lilypad.bootloader.lock_bits=0x0F - -lilypad.build.f_cpu=8000000L -lilypad.build.board=AVR_LILYPAD -lilypad.build.core=arduino -lilypad.build.variant=standard - -## LilyPad Arduino w/ ATmega328P -## ----------------------------- -lilypad.menu.cpu.atmega328=ATmega328P - -lilypad.menu.cpu.atmega328.upload.maximum_size=30720 -lilypad.menu.cpu.atmega328.upload.maximum_data_size=2048 -lilypad.menu.cpu.atmega328.upload.speed=57600 - -lilypad.menu.cpu.atmega328.bootloader.low_fuses=0xFF -lilypad.menu.cpu.atmega328.bootloader.high_fuses=0xDA -lilypad.menu.cpu.atmega328.bootloader.extended_fuses=0xFD -lilypad.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex - -lilypad.menu.cpu.atmega328.build.mcu=atmega328p - -## LilyPad Arduino w/ ATmega168 -## ---------------------------- -lilypad.menu.cpu.atmega168=ATmega168 - -lilypad.menu.cpu.atmega168.upload.maximum_size=14336 -lilypad.menu.cpu.atmega168.upload.maximum_data_size=1024 -lilypad.menu.cpu.atmega168.upload.speed=19200 - -lilypad.menu.cpu.atmega168.bootloader.low_fuses=0xe2 -lilypad.menu.cpu.atmega168.bootloader.high_fuses=0xdd -lilypad.menu.cpu.atmega168.bootloader.extended_fuses=0xF8 -lilypad.menu.cpu.atmega168.bootloader.file=lilypad/LilyPadBOOT_168.hex - -lilypad.menu.cpu.atmega168.build.mcu=atmega168 - -############################################################## - -pro.name=Arduino Pro or Pro Mini - -pro.upload.tool=avrdude -pro.upload.protocol=arduino - -pro.bootloader.tool=avrdude -pro.bootloader.unlock_bits=0x3F -pro.bootloader.lock_bits=0x0F - -pro.build.board=AVR_PRO -pro.build.core=arduino -pro.build.variant=eightanaloginputs - -## Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328P -## -------------------------------------------------- -pro.menu.cpu.16MHzatmega328=ATmega328P (5V, 16 MHz) - -pro.menu.cpu.16MHzatmega328.upload.maximum_size=30720 -pro.menu.cpu.16MHzatmega328.upload.maximum_data_size=2048 -pro.menu.cpu.16MHzatmega328.upload.speed=57600 - -pro.menu.cpu.16MHzatmega328.bootloader.low_fuses=0xFF -pro.menu.cpu.16MHzatmega328.bootloader.high_fuses=0xDA -pro.menu.cpu.16MHzatmega328.bootloader.extended_fuses=0xFD -pro.menu.cpu.16MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex - -pro.menu.cpu.16MHzatmega328.build.mcu=atmega328p -pro.menu.cpu.16MHzatmega328.build.f_cpu=16000000L - -## Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328P -## --------------------------------------------------- -pro.menu.cpu.8MHzatmega328=ATmega328P (3.3V, 8 MHz) - -pro.menu.cpu.8MHzatmega328.upload.maximum_size=30720 -pro.menu.cpu.8MHzatmega328.upload.maximum_data_size=2048 -pro.menu.cpu.8MHzatmega328.upload.speed=57600 - -pro.menu.cpu.8MHzatmega328.bootloader.low_fuses=0xFF -pro.menu.cpu.8MHzatmega328.bootloader.high_fuses=0xDA -pro.menu.cpu.8MHzatmega328.bootloader.extended_fuses=0xFD -pro.menu.cpu.8MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex - -pro.menu.cpu.8MHzatmega328.build.mcu=atmega328p -pro.menu.cpu.8MHzatmega328.build.f_cpu=8000000L - -## Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168 -## ------------------------------------------------- -pro.menu.cpu.16MHzatmega168=ATmega168 (5V, 16 MHz) - -pro.menu.cpu.16MHzatmega168.upload.maximum_size=14336 -pro.menu.cpu.16MHzatmega168.upload.maximum_data_size=1024 -pro.menu.cpu.16MHzatmega168.upload.speed=19200 - -pro.menu.cpu.16MHzatmega168.bootloader.low_fuses=0xff -pro.menu.cpu.16MHzatmega168.bootloader.high_fuses=0xdd -pro.menu.cpu.16MHzatmega168.bootloader.extended_fuses=0xF8 -pro.menu.cpu.16MHzatmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex - -pro.menu.cpu.16MHzatmega168.build.mcu=atmega168 -pro.menu.cpu.16MHzatmega168.build.f_cpu=16000000L - -## Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168 -## -------------------------------------------------- -pro.menu.cpu.8MHzatmega168=ATmega168 (3.3V, 8 MHz) - -pro.menu.cpu.8MHzatmega168.upload.maximum_size=14336 -pro.menu.cpu.8MHzatmega168.upload.maximum_data_size=1024 -pro.menu.cpu.8MHzatmega168.upload.speed=19200 - -pro.menu.cpu.8MHzatmega168.bootloader.low_fuses=0xc6 -pro.menu.cpu.8MHzatmega168.bootloader.high_fuses=0xdd -pro.menu.cpu.8MHzatmega168.bootloader.extended_fuses=0xF8 -pro.menu.cpu.8MHzatmega168.bootloader.file=atmega/ATmegaBOOT_168_pro_8MHz.hex - -pro.menu.cpu.8MHzatmega168.build.mcu=atmega168 -pro.menu.cpu.8MHzatmega168.build.f_cpu=8000000L - -############################################################## - -atmegang.name=Arduino NG or older - -atmegang.upload.tool=avrdude -atmegang.upload.protocol=arduino -atmegang.upload.speed=19200 - -atmegang.bootloader.tool=avrdude -atmegang.bootloader.unlock_bits=0x3F -atmegang.bootloader.lock_bits=0x0F - -atmegang.build.mcu=atmegang -atmegang.build.f_cpu=16000000L -atmegang.build.board=AVR_NG -atmegang.build.core=arduino -atmegang.build.variant=standard - -## Arduino NG or older w/ ATmega168 -## -------------------------------- -atmegang.menu.cpu.atmega168=ATmega168 - -atmegang.menu.cpu.atmega168.upload.maximum_size=14336 -atmegang.menu.cpu.atmega168.upload.maximum_data_size=1024 - -atmegang.menu.cpu.atmega168.bootloader.low_fuses=0xff -atmegang.menu.cpu.atmega168.bootloader.high_fuses=0xdd -atmegang.menu.cpu.atmega168.bootloader.extended_fuses=0xF8 -atmegang.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_ng.hex - -atmegang.menu.cpu.atmega168.build.mcu=atmega168 - -## Arduino NG or older w/ ATmega8 -## ------------------------------ -atmegang.menu.cpu.atmega8=ATmega8 - -atmegang.menu.cpu.atmega8.upload.maximum_size=7168 -atmegang.menu.cpu.atmega8.upload.maximum_data_size=1024 - -atmegang.menu.cpu.atmega8.bootloader.low_fuses=0xdf -atmegang.menu.cpu.atmega8.bootloader.high_fuses=0xca -atmegang.menu.cpu.atmega8.bootloader.extended_fuses= -atmegang.menu.cpu.atmega8.bootloader.file=atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex - -atmegang.menu.cpu.atmega8.build.mcu=atmega8 - -############################################################## - robotControl.name=Arduino Robot Control robotControl.vid.0=0x2341 robotControl.pid.0=0x0038 @@ -870,30 +330,6 @@ robotMotor.build.extra_flags={build.usb_flags} ############################################################## -gemma.vid.0=0x2341 -gemma.pid.0=0x0c9f - -gemma.name=Arduino Gemma - -gemma.bootloader.low_fuses=0xF1 -gemma.bootloader.high_fuses=0xD5 -gemma.bootloader.extended_fuses=0xFE -gemma.bootloader.tool=avrdude -gemma.bootloader.lock_bits= -gemma.bootloader.unlock_bits= -gemma.bootloader.file=gemma/gemma_v1.hex - -gemma.build.mcu=attiny85 -gemma.build.f_cpu=8000000L -gemma.build.core=arduino -gemma.build.variant=gemma -gemma.build.board=AVR_GEMMA - -gemma.upload.tool=avrdude -gemma.upload.maximum_size=5310 - -############################################################## - # Adafruit Circuit Playground 32u4 w/Caterina Configuration circuitplay32u4cat.name=Adafruit Circuit Playground circuitplay32u4cat.bootloader.low_fuses=0xff @@ -1033,36 +469,3 @@ one.build.board=AVR_LININO_ONE one.build.core=arduino one.build.variant=yun one.build.extra_flags={build.usb_flags} - -############################################################## - -unowifi.name=Arduino Uno WiFi -unowifi.vid.0=0x2A03 -unowifi.pid.0=0x0057 - -unowifi.upload.tool=avrdude -unowifi.upload.protocol=arduino -unowifi.upload.maximum_size=32256 -unowifi.upload.maximum_data_size=2048 -unowifi.upload.speed=115200 -unowifi.upload.network.endpoint_upload=/pgm/upload -unowifi.upload.network.endpoint_sync=/pgm/sync -unowifi.upload.network.sync_return=204:SYNC -unowifi.upload.network.endpoint_reset=/log/reset -unowifi.upload.network.port=80 - -unowifi.bootloader.tool=avrdude -unowifi.bootloader.low_fuses=0xFF -unowifi.bootloader.high_fuses=0xDE -unowifi.bootloader.extended_fuses=0x05 -unowifi.bootloader.unlock_bits=0x3F -unowifi.bootloader.lock_bits=0x0F -unowifi.bootloader.file=optiboot/optiboot_atmega328.hex - -unowifi.build.mcu=atmega328p -unowifi.build.f_cpu=16000000L -unowifi.build.board=AVR_UNO_WIFI_DEV_ED -unowifi.build.core=arduino -unowifi.build.variant=standard -unowifi.build.esp_ch_uart_br=19200 -unowifi.build.extra_flags=-DESP_CH_UART -DESP_CH_UART_BR={build.esp_ch_uart_br} diff --git a/bootloaders/atmega/ATmegaBOOT_168.c b/bootloaders/atmega/ATmegaBOOT_168.c deleted file mode 100644 index ff2c4e48..00000000 --- a/bootloaders/atmega/ATmegaBOOT_168.c +++ /dev/null @@ -1,1057 +0,0 @@ -/**********************************************************/ -/* Serial Bootloader for Atmel megaAVR Controllers */ -/* */ -/* tested with ATmega8, ATmega128 and ATmega168 */ -/* should work with other mega's, see code for details */ -/* */ -/* ATmegaBOOT.c */ -/* */ -/* */ -/* 20090308: integrated Mega changes into main bootloader */ -/* source by D. Mellis */ -/* 20080930: hacked for Arduino Mega (with the 1280 */ -/* processor, backwards compatible) */ -/* by D. Cuartielles */ -/* 20070626: hacked for Arduino Diecimila (which auto- */ -/* resets when a USB connection is made to it) */ -/* by D. Mellis */ -/* 20060802: hacked for Arduino by D. Cuartielles */ -/* based on a previous hack by D. Mellis */ -/* and D. Cuartielles */ -/* */ -/* Monitor and debug functions were added to the original */ -/* code by Dr. Erik Lins, chip45.com. (See below) */ -/* */ -/* Thanks to Karl Pitrich for fixing a bootloader pin */ -/* problem and more informative LED blinking! */ -/* */ -/* For the latest version see: */ -/* http://www.chip45.com/ */ -/* */ -/* ------------------------------------------------------ */ -/* */ -/* based on stk500boot.c */ -/* Copyright (c) 2003, Jason P. Kyle */ -/* All rights reserved. */ -/* see avr1.org for original file and information */ -/* */ -/* This program is free software; you can redistribute it */ -/* and/or modify it under the terms of the GNU General */ -/* Public License as published by the Free Software */ -/* Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will */ -/* be useful, but WITHOUT ANY WARRANTY; without even the */ -/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ -/* PARTICULAR PURPOSE. See the GNU General Public */ -/* License for more details. */ -/* */ -/* You should have received a copy of the GNU General */ -/* Public License along with this program; if not, write */ -/* to the Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* */ -/* Licence can be viewed at */ -/* http://www.fsf.org/licenses/gpl.txt */ -/* */ -/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ -/* m8515,m8535. ATmega161 has a very small boot block so */ -/* isn't supported. */ -/* */ -/* Tested with m168 */ -/**********************************************************/ - - -/* some includes */ -#include -#include -#include -#include -#include -#include - -/* the current avr-libc eeprom functions do not support the ATmega168 */ -/* own eeprom write/read functions are used instead */ -#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__) || !defined(__AVR_ATmega328__) -#include -#endif - -/* Use the F_CPU defined in Makefile */ - -/* 20060803: hacked by DojoCorp */ -/* 20070626: hacked by David A. Mellis to decrease waiting time for auto-reset */ -/* set the waiting time for the bootloader */ -/* get this from the Makefile instead */ -/* #define MAX_TIME_COUNT (F_CPU>>4) */ - -/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ -#define MAX_ERROR_COUNT 5 - -/* set the UART baud rate */ -/* 20060803: hacked by DojoCorp */ -//#define BAUD_RATE 115200 -#ifndef BAUD_RATE -#define BAUD_RATE 19200 -#endif - - -/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ -/* never allow AVR Studio to do an update !!!! */ -#define HW_VER 0x02 -#define SW_MAJOR 0x01 -#define SW_MINOR 0x10 - - -/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ -/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ -/* ATmega1280 has four UARTS, but for Arduino Mega, we will only use RXD0 to get code */ -/* BL0... means UART0, BL1... means UART1 */ -#ifdef __AVR_ATmega128__ -#define BL_DDR DDRF -#define BL_PORT PORTF -#define BL_PIN PINF -#define BL0 PINF7 -#define BL1 PINF6 -#elif defined __AVR_ATmega1280__ -/* we just don't do anything for the MEGA and enter bootloader on reset anyway*/ -#else -/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ -#define BL_DDR DDRD -#define BL_PORT PORTD -#define BL_PIN PIND -#define BL PIND6 -#endif - - -/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ -/* if monitor functions are included, LED goes on after monitor was entered */ -#if defined __AVR_ATmega128__ || defined __AVR_ATmega1280__ -/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128, Arduino Mega) */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -#define LED PINB7 -#else -/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duomilanuove */ -/* other boards like e.g. Crumb8, Crumb168 are using PB2 */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -#define LED PINB5 -#endif - - -/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) -#define MONITOR 1 -#endif - - -/* define various device id's */ -/* manufacturer byte is always the same */ -#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( - -#if defined __AVR_ATmega1280__ -#define SIG2 0x97 -#define SIG3 0x03 -#define PAGE_SIZE 0x80U //128 words - -#elif defined __AVR_ATmega1281__ -#define SIG2 0x97 -#define SIG3 0x04 -#define PAGE_SIZE 0x80U //128 words - -#elif defined __AVR_ATmega128__ -#define SIG2 0x97 -#define SIG3 0x02 -#define PAGE_SIZE 0x80U //128 words - -#elif defined __AVR_ATmega64__ -#define SIG2 0x96 -#define SIG3 0x02 -#define PAGE_SIZE 0x80U //128 words - -#elif defined __AVR_ATmega32__ -#define SIG2 0x95 -#define SIG3 0x02 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega16__ -#define SIG2 0x94 -#define SIG3 0x03 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega8__ -#define SIG2 0x93 -#define SIG3 0x07 -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega88__ -#define SIG2 0x93 -#define SIG3 0x0a -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega168__ -#define SIG2 0x94 -#define SIG3 0x06 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega328P__ -#define SIG2 0x95 -#define SIG3 0x0F -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega328__ -#define SIG2 0x95 -#define SIG3 0x14 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega162__ -#define SIG2 0x94 -#define SIG3 0x04 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega163__ -#define SIG2 0x94 -#define SIG3 0x02 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega169__ -#define SIG2 0x94 -#define SIG3 0x05 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega8515__ -#define SIG2 0x93 -#define SIG3 0x06 -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega8535__ -#define SIG2 0x93 -#define SIG3 0x08 -#define PAGE_SIZE 0x20U //32 words -#endif - - -/* function prototypes */ -void putch(char); -char getch(void); -void getNch(uint8_t); -void byte_response(uint8_t); -void nothing_response(void); -char gethex(void); -void puthex(char); -void flash_led(uint8_t); - -/* some variables */ -union address_union { - uint16_t word; - uint8_t byte[2]; -} address; - -union length_union { - uint16_t word; - uint8_t byte[2]; -} length; - -struct flags_struct { - unsigned eeprom : 1; - unsigned rampz : 1; -} flags; - -uint8_t buff[256]; -uint8_t address_high; - -uint8_t pagesz=0x80; - -uint8_t i; -uint8_t bootuart = 0; - -uint8_t error_count = 0; - -void (*app_start)(void) = 0x0000; - - -/* main program starts here */ -int main(void) -{ - uint8_t ch,ch2; - uint16_t w; - -#ifdef WATCHDOG_MODS - ch = MCUSR; - MCUSR = 0; - - WDTCSR |= _BV(WDCE) | _BV(WDE); - WDTCSR = 0; - - // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. - if (! (ch & _BV(EXTRF))) // if its a not an external reset... - app_start(); // skip bootloader -#else - asm volatile("nop\n\t"); -#endif - - /* set pin direction for bootloader pin and enable pullup */ - /* for ATmega128, two pins need to be initialized */ -#ifdef __AVR_ATmega128__ - BL_DDR &= ~_BV(BL0); - BL_DDR &= ~_BV(BL1); - BL_PORT |= _BV(BL0); - BL_PORT |= _BV(BL1); -#else - /* We run the bootloader regardless of the state of this pin. Thus, don't - put it in a different state than the other pins. --DAM, 070709 - This also applies to Arduino Mega -- DC, 080930 - BL_DDR &= ~_BV(BL); - BL_PORT |= _BV(BL); - */ -#endif - - -#ifdef __AVR_ATmega128__ - /* check which UART should be used for booting */ - if(bit_is_clear(BL_PIN, BL0)) { - bootuart = 1; - } - else if(bit_is_clear(BL_PIN, BL1)) { - bootuart = 2; - } -#endif - -#if defined __AVR_ATmega1280__ - /* the mega1280 chip has four serial ports ... we could eventually use any of them, or not? */ - /* however, we don't wanna confuse people, to avoid making a mess, we will stick to RXD0, TXD0 */ - bootuart = 1; -#endif - - /* check if flash is programmed already, if not start bootloader anyway */ - if(pgm_read_byte_near(0x0000) != 0xFF) { - -#ifdef __AVR_ATmega128__ - /* no UART was selected, start application */ - if(!bootuart) { - app_start(); - } -#else - /* check if bootloader pin is set low */ - /* we don't start this part neither for the m8, nor m168 */ - //if(bit_is_set(BL_PIN, BL)) { - // app_start(); - // } -#endif - } - -#ifdef __AVR_ATmega128__ - /* no bootuart was selected, default to uart 0 */ - if(!bootuart) { - bootuart = 1; - } -#endif - - - /* initialize UART(s) depending on CPU defined */ -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) - if(bootuart == 1) { - UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSR0A = 0x00; - UCSR0C = 0x06; - UCSR0B = _BV(TXEN0)|_BV(RXEN0); - } - if(bootuart == 2) { - UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSR1A = 0x00; - UCSR1C = 0x06; - UCSR1B = _BV(TXEN1)|_BV(RXEN1); - } -#elif defined __AVR_ATmega163__ - UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSRA = 0x00; - UCSRB = _BV(TXEN)|_BV(RXEN); -#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__) - -#ifdef DOUBLE_SPEED - UCSR0A = (1<> 8; -#else - UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; -#endif - - UCSR0B = (1<>8; // set baud rate - UBRRL = (((F_CPU/BAUD_RATE)/16)-1); - UCSRB = (1<> 8; - UCSRA = 0x00; - UCSRC = 0x06; - UCSRB = _BV(TXEN)|_BV(RXEN); -#endif - -#if defined __AVR_ATmega1280__ - /* Enable internal pull-up resistor on pin D0 (RX), in order - to supress line noise that prevents the bootloader from - timing out (DAM: 20070509) */ - /* feature added to the Arduino Mega --DC: 080930 */ - DDRE &= ~_BV(PINE0); - PORTE |= _BV(PINE0); -#endif - - - /* set LED pin as output */ - LED_DDR |= _BV(LED); - - - /* flash onboard LED to signal entering of bootloader */ -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) - // 4x for UART0, 5x for UART1 - flash_led(NUM_LED_FLASHES + bootuart); -#else - flash_led(NUM_LED_FLASHES); -#endif - - /* 20050803: by DojoCorp, this is one of the parts provoking the - system to stop listening, cancelled from the original */ - //putch('\0'); - - /* forever loop */ - for (;;) { - - /* get character from UART */ - ch = getch(); - - /* A bunch of if...else if... gives smaller code than switch...case ! */ - - /* Hello is anyone home ? */ - if(ch=='0') { - nothing_response(); - } - - - /* Request programmer ID */ - /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ - /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ - else if(ch=='1') { - if (getch() == ' ') { - putch(0x14); - putch('A'); - putch('V'); - putch('R'); - putch(' '); - putch('I'); - putch('S'); - putch('P'); - putch(0x10); - } else { - if (++error_count == MAX_ERROR_COUNT) - app_start(); - } - } - - - /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ - else if(ch=='@') { - ch2 = getch(); - if (ch2>0x85) getch(); - nothing_response(); - } - - - /* AVR ISP/STK500 board requests */ - else if(ch=='A') { - ch2 = getch(); - if(ch2==0x80) byte_response(HW_VER); // Hardware version - else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version - else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version - else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 - else byte_response(0x00); // Covers various unnecessary responses we don't care about - } - - - /* Device Parameters DON'T CARE, DEVICE IS FIXED */ - else if(ch=='B') { - getNch(20); - nothing_response(); - } - - - /* Parallel programming stuff DON'T CARE */ - else if(ch=='E') { - getNch(5); - nothing_response(); - } - - - /* P: Enter programming mode */ - /* R: Erase device, don't care as we will erase one page at a time anyway. */ - else if(ch=='P' || ch=='R') { - nothing_response(); - } - - - /* Leave programming mode */ - else if(ch=='Q') { - nothing_response(); -#ifdef WATCHDOG_MODS - // autoreset via watchdog (sneaky!) - WDTCSR = _BV(WDE); - while (1); // 16 ms -#endif - } - - - /* Set address, little endian. EEPROM in bytes, FLASH in words */ - /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ - /* This might explain why little endian was used here, big endian used everywhere else. */ - else if(ch=='U') { - address.byte[0] = getch(); - address.byte[1] = getch(); - nothing_response(); - } - - - /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ - else if(ch=='V') { - if (getch() == 0x30) { - getch(); - ch = getch(); - getch(); - if (ch == 0) { - byte_response(SIG1); - } else if (ch == 1) { - byte_response(SIG2); - } else { - byte_response(SIG3); - } - } else { - getNch(3); - byte_response(0x00); - } - } - - - /* Write memory, length is big endian and is in bytes */ - else if(ch=='d') { - length.byte[1] = getch(); - length.byte[0] = getch(); - flags.eeprom = 0; - if (getch() == 'E') flags.eeprom = 1; - for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME - else address_high = 0x00; -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) - RAMPZ = address_high; -#endif - address.word = address.word << 1; //address * 2 -> byte location - /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ - if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes - cli(); //Disable interrupts, just to be sure -#if defined(EEPE) - while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete -#else - while(bit_is_set(EECR,EEWE)); //Wait for previous EEPROM writes to complete -#endif - asm volatile( - "clr r17 \n\t" //page_word_count - "lds r30,address \n\t" //Address of FLASH location (in bytes) - "lds r31,address+1 \n\t" - "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM - "ldi r29,hi8(buff) \n\t" - "lds r24,length \n\t" //Length of data to be written (in bytes) - "lds r25,length+1 \n\t" - "length_loop: \n\t" //Main loop, repeat for number of words in block - "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page - "brne no_page_erase \n\t" - "wait_spm1: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm1 \n\t" - "ldi r16,0x03 \n\t" //Erase page pointed to by Z - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "wait_spm2: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm2 \n\t" - - "ldi r16,0x11 \n\t" //Re-enable RWW section - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "no_page_erase: \n\t" - "ld r0,Y+ \n\t" //Write 2 bytes into page buffer - "ld r1,Y+ \n\t" - - "wait_spm3: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm3 \n\t" - "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer - "sts %0,r16 \n\t" - "spm \n\t" - - "inc r17 \n\t" //page_word_count++ - "cpi r17,%1 \n\t" - "brlo same_page \n\t" //Still same page in FLASH - "write_page: \n\t" - "clr r17 \n\t" //New page, write current one first - "wait_spm4: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm4 \n\t" -#ifdef __AVR_ATmega163__ - "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write -#endif - "ldi r16,0x05 \n\t" //Write page pointed to by Z - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" - "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) -#endif - "wait_spm5: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm5 \n\t" - "ldi r16,0x11 \n\t" //Re-enable RWW section - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "same_page: \n\t" - "adiw r30,2 \n\t" //Next word in FLASH - "sbiw r24,2 \n\t" //length-2 - "breq final_write \n\t" //Finished - "rjmp length_loop \n\t" - "final_write: \n\t" - "cpi r17,0 \n\t" - "breq block_done \n\t" - "adiw r24,2 \n\t" //length+2, fool above check on length after short page write - "rjmp write_page \n\t" - "block_done: \n\t" - "clr __zero_reg__ \n\t" //restore zero register -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) - : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" -#else - : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" -#endif - ); - /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ - /* exit the bootloader without a power cycle anyhow */ - } - putch(0x14); - putch(0x10); - } else { - if (++error_count == MAX_ERROR_COUNT) - app_start(); - } - } - - - /* Read memory block mode, length is big endian. */ - else if(ch=='t') { - length.byte[1] = getch(); - length.byte[0] = getch(); -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) - if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME - else flags.rampz = 0; -#endif - address.word = address.word << 1; // address * 2 -> byte location - if (getch() == 'E') flags.eeprom = 1; - else flags.eeprom = 0; - if (getch() == ' ') { // Command terminator - putch(0x14); - for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay - if (flags.eeprom) { // Byte access EEPROM read -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) - while(EECR & (1<= 'a') { - return (a - 'a' + 0x0a); - } else if(a >= '0') { - return(a - '0'); - } - return a; -} - - -char gethex(void) { - return (gethexnib() << 4) + gethexnib(); -} - - -void puthex(char ch) { - char ah; - - ah = ch >> 4; - if(ah >= 0x0a) { - ah = ah - 0x0a + 'a'; - } else { - ah += '0'; - } - - ch &= 0x0f; - if(ch >= 0x0a) { - ch = ch - 0x0a + 'a'; - } else { - ch += '0'; - } - - putch(ah); - putch(ch); -} - - -void putch(char ch) -{ -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) - if(bootuart == 1) { - while (!(UCSR0A & _BV(UDRE0))); - UDR0 = ch; - } - else if (bootuart == 2) { - while (!(UCSR1A & _BV(UDRE1))); - UDR1 = ch; - } -#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__) - while (!(UCSR0A & _BV(UDRE0))); - UDR0 = ch; -#else - /* m8,16,32,169,8515,8535,163 */ - while (!(UCSRA & _BV(UDRE))); - UDR = ch; -#endif -} - - -char getch(void) -{ -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) - uint32_t count = 0; - if(bootuart == 1) { - while(!(UCSR0A & _BV(RXC0))) { - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - - return UDR0; - } - else if(bootuart == 2) { - while(!(UCSR1A & _BV(RXC1))) { - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - - return UDR1; - } - return 0; -#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__) - uint32_t count = 0; - while(!(UCSR0A & _BV(RXC0))){ - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - return UDR0; -#else - /* m8,16,32,169,8515,8535,163 */ - uint32_t count = 0; - while(!(UCSRA & _BV(RXC))){ - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - return UDR; -#endif -} - - -void getNch(uint8_t count) -{ - while(count--) { -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) - if(bootuart == 1) { - while(!(UCSR0A & _BV(RXC0))); - UDR0; - } - else if(bootuart == 2) { - while(!(UCSR1A & _BV(RXC1))); - UDR1; - } -#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined (__AVR_ATmega328__) - getch(); -#else - /* m8,16,32,169,8515,8535,163 */ - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - //while(!(UCSRA & _BV(RXC))); - //UDR; - getch(); // need to handle time out -#endif - } -} - - -void byte_response(uint8_t val) -{ - if (getch() == ' ') { - putch(0x14); - putch(val); - putch(0x10); - } else { - if (++error_count == MAX_ERROR_COUNT) - app_start(); - } -} - - -void nothing_response(void) -{ - if (getch() == ' ') { - putch(0x14); - putch(0x10); - } else { - if (++error_count == MAX_ERROR_COUNT) - app_start(); - } -} - -void flash_led(uint8_t count) -{ - while (count--) { - LED_PORT |= _BV(LED); - _delay_ms(100); - LED_PORT &= ~_BV(LED); - _delay_ms(100); - } -} - - -/* end of file ATmegaBOOT.c */ diff --git a/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex b/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex deleted file mode 100644 index f16e877f..00000000 --- a/bootloaders/atmega/ATmegaBOOT_168_atmega1280.hex +++ /dev/null @@ -1,245 +0,0 @@ -:020000021000EC -:10F000000C9472F80C9492F80C9492F80C9492F878 -:10F010000C9492F80C9492F80C9492F80C9492F848 -:10F020000C9492F80C9492F80C9492F80C9492F838 -:10F030000C9492F80C9492F80C9492F80C9492F828 -:10F040000C9492F80C9492F80C9492F80C9492F818 -:10F050000C9492F80C9492F80C9492F80C9492F808 -:10F060000C9492F80C9492F80C9492F80C9492F8F8 -:10F070000C9492F80C9492F80C9492F80C9492F8E8 -:10F080000C9492F80C9492F80C9492F80C9492F8D8 -:10F090000C9492F80C9492F80C9492F80C9492F8C8 -:10F0A0000C9492F80C9492F80C9492F80C9492F8B8 -:10F0B0000C9492F80C9492F80C9492F80C9492F8A8 -:10F0C0000C9492F80C9492F80C9492F80C9492F898 -:10F0D0000C9492F80C9492F80C9492F80C9492F888 -:10F0E0000C9492F811241FBECFEFD1E2DEBFCDBF4A -:10F0F00012E0A0E0B2E0EEEDFEEF01E00BBF02C0D7 -:10F1000007900D92A833B107D9F71BBE13E0A8E30F -:10F11000B2E001C01D92A334B107E1F70E9412FAD8 -:10F120000C946DFF0C9400F8982F959595959595F6 -:10F130009595905D8F708A301CF1282F295A809107 -:10F140003802813019F0823071F008958091C0004A -:10F1500085FFFCCF9093C6008091C00085FFFCCF57 -:10F160002093C60008958091C80085FFFCCF90933E -:10F17000CE008091C80085FFFCCF2093CE0008957B -:10F18000282F205DDCCF982F80913802813019F034 -:10F19000823041F008958091C00085FFFCCF9093AC -:10F1A000C60008958091C80085FFFCCF9093CE00E3 -:10F1B0000895EF92FF920F931F9380913802813050 -:10F1C00069F1823031F080E01F910F91FF90EF9054 -:10F1D0000895EE24FF2487018091C80087FD17C0A1 -:10F1E0000894E11CF11C011D111D81E4E81682E464 -:10F1F000F8068FE0080780E0180770F3E0913A0204 -:10F20000F0913B0209958091C80087FFE9CF80917A -:10F21000CE001F910F91FF90EF900895EE24FF24F0 -:10F2200087018091C00087FD17C00894E11CF11C84 -:10F23000011D111D81E4E81682E4F8068FE008073D -:10F2400080E0180770F3E0913A02F0913B020995D3 -:10F250008091C00087FFE9CF8091C6001F910F9178 -:10F26000FF90EF9008950E94D9F8982F809138026E -:10F27000813049F0823091F091366CF490330CF08B -:10F280009053892F08958091C00085FFFCCF909303 -:10F29000C60091369CF39755892F08958091C80038 -:10F2A00085FFFCCF9093CE00E7CF1F930E9433F9E8 -:10F2B000182F0E9433F91295107F810F1F91089526 -:10F2C000982F20913802992339F0213031F02230E3 -:10F2D00061F091509923C9F708958091C00087FF8C -:10F2E000FCCF8091C6009150F5CF8091C80087FF78 -:10F2F000FCCF8091CE009150EDCF1F93182F0E942C -:10F30000D9F8803249F0809139028F5F80933902B9 -:10F31000853091F11F910895809138028130B9F0C4 -:10F320008230C1F78091C80085FFFCCF84E18093D3 -:10F33000CE008091C80085FFFCCF1093CE00809155 -:10F34000C80085FFFCCF80E18093CE00E3CF8091A1 -:10F35000C00085FFFCCF84E18093C6008091C0008F -:10F3600085FFFCCF1093C6008091C00085FFFCCFC5 -:10F3700080E18093C600CECFE0913A02F0913B024B -:10F3800009951F9108950E94D9F8803241F080912B -:10F3900039028F5F80933902853029F10895809179 -:10F3A0003802813089F08230C9F78091C80085FF2A -:10F3B000FCCF84E18093CE008091C80085FFFCCF14 -:10F3C00080E18093CE0008958091C00085FFFCCF3E -:10F3D00084E18093C6008091C00085FFFCCF80E16E -:10F3E0008093C6000895E0913A02F0913B0209959E -:10F3F000089540E951E08823A1F02F9A28EE33E0E8 -:10F40000FA013197F1F721503040D1F72F9828EECB -:10F4100033E0FA013197F1F721503040D1F78150B4 -:10F4200061F708952F923F924F925F926F927F9271 -:10F430008F929F92AF92BF92CF92DF92EF92FF9204 -:10F440000F931F93CF93DF93000081E080933802E6 -:10F4500080E18093C4001092C5001092C00086E045 -:10F460008093C20088E18093C1006898709A279ABF -:10F4700081E00E94F9F9E4E1EE2E7EE1D72E67E902 -:10F48000C62E53E0B52E40E1A42E9924939431E486 -:10F49000832E26E5722E92E5692E80E2582E09E42D -:10F4A000402E13E5312EB0E52B2E0E94D9F8803383 -:10F4B000C9F1813309F452C0803409F4C8C08134E1 -:10F4C00009F4EAC0823489F1853409F4CAC0803570 -:10F4D00049F1823539F1813529F1853509F4ECC0DE -:10F4E000863509F409C1843609F428C1843709F442 -:10F4F000ABC1853709F473C2863709F4D9C08132AC -:10F5000009F4B7C2809139028F5F80933902853048 -:10F5100061F6E0913A02F0913B0209950E94D9F818 -:10F52000803339F60E94C3F9C0CF2091380293E1AD -:10F5300005C0223061F09923A9F391502130C9F719 -:10F540008091C00087FFFCCF8091C600F4CF8091EE -:10F55000C80087FFFCCF8091CE00EDCF0E94D9F884 -:10F56000803281F6809138028130D1F1823009F009 -:10F570009CCF8091C80085FFFCCFE092CE008091A7 -:10F58000C80085FFFCCF8092CE008091C80085FF27 -:10F59000FCCF7092CE008091C80085FFFCCF6092B6 -:10F5A000CE008091C80085FFFCCF5092CE008091A4 -:10F5B000C80085FFFCCF4092CE008091C80085FF37 -:10F5C000FCCF3092CE008091C80085FFFCCF209206 -:10F5D000CE008091C80085FFFCCFA092CE0065CF01 -:10F5E0008091C00085FFFCCFE092C6008091C000F2 -:10F5F00085FFFCCF8092C6008091C00085FFFCCFC4 -:10F600007092C6008091C00085FFFCCF6092C6005A -:10F610008091C00085FFFCCF5092C6008091C00051 -:10F6200085FFFCCF4092C6008091C00085FFFCCFD3 -:10F630003092C6008091C00085FFFCCF2092C600AA -:10F640008091C00085FFFCCFA092C6002ECF0E9403 -:10F65000D9F8863808F466CF0E94D9F80E94C3F919 -:10F6600024CF2091380294E0213041F0223069F01B -:10F67000992309F457CF91502130C1F78091C000F0 -:10F6800087FFFCCF8091C600F3CF8091C80087FF31 -:10F69000FCCF8091CE00ECCF0E94D9F8803841F1A8 -:10F6A000813809F447C0823809F4CAC08839E1F0CA -:10F6B00080E00E947DF9F9CE0E94D9F880933C0247 -:10F6C0000E94D9F880933D020E94C3F9EECE0E94B9 -:10F6D000D9F80E94D9F8182F0E94D9F8112309F4FB -:10F6E0007EC2113009F40AC283E00E947DF9DDCEAA -:10F6F00082E00E947DF9D9CE0E94D9F8803339F397 -:10F700002091380292E0213039F0223061F09923C3 -:10F7100079F291502130C9F78091C00087FFFCCF6A -:10F720008091C600F4CF8091C80087FFFCCF809104 -:10F73000CE00EDCF81E00E947DF9B7CE0E94D9F8CE -:10F7400080933F030E94D9F880933E038091420347 -:10F750008E7F809342030E94D9F8853409F4B3C1A7 -:10F7600080913E0390913F03892B89F000E010E0E7 -:10F770000E94D9F8F801E25CFD4F80830F5F1F4FB4 -:10F7800080913E0390913F030817190788F30E9468 -:10F79000D9F8803209F0B6CE8091420380FFB2C121 -:10F7A00040913C0250913D02440F551F50933D0241 -:10F7B00040933C0260913E0370913F0361157105D7 -:10F7C000F1F080E090E09A01280F391FFC01E25C23 -:10F7D000FD4FE081F999FECF1FBA32BD21BDE0BDDA -:10F7E0000FB6F894FA9AF99A0FBE01968617970702 -:10F7F00050F3460F571F50933D0240933C028091B7 -:10F800003802813081F0823009F04FCE8091C800FB -:10F8100085FFFCCFE092CE008091C80085FFFCCF31 -:10F82000A092CE0042CE8091C00085FFFCCFE09236 -:10F83000C6008091C00085FFFCCFA092C60035CEE7 -:10F8400080E10E947DF931CE0E94D9F880933F0378 -:10F850000E94D9F880933E0320913C0230913D02F2 -:10F8600037FD46C1809142038D7F80934203220F72 -:10F87000331F30933D0220933C020E94D9F8853417 -:10F8800009F430C1809142038E7F809342030E942D -:10F89000D9F8803209F009CE60913802613009F45C -:10F8A0006FC0623009F473C000913E0310913F03B2 -:10F8B0000115110509F440C080914203782F717041 -:10F8C000F82EF69481E0F82240913C0250913D02DE -:10F8D00020E030E013C0FF2009F060C0FA019491ED -:10F8E000613009F43BC0623009F441C0CA0101969D -:10F8F0002F5F3F4FAC0120173107D0F4772359F326 -:10F90000F999FECF52BD41BDF89A90B56130F9F03A -:10F91000623061F78091C80085FFFCCF9093CE00E4 -:10F92000CA0101962F5F3F4FAC012017310730F31A -:10F9300090933D0280933C02613009F4CAC062306A -:10F9400009F0B3CD8091C80085FFFCCF46CE8091F1 -:10F95000C00085FFFCCF9093C600C8CF8091C00047 -:10F9600085FDF9CF8091C00085FFF8CFF4CF80915D -:10F97000C80085FDD3CF8091C80085FFF8CFCECFDA -:10F980008091C00085FFFCCFE092C6008DCF8091B2 -:10F99000C80085FFFCCFE092CE0086CFCA01A0E070 -:10F9A000B0E080509040AF4FBF4FABBFFC0197918C -:10F9B000613061F0623009F099CF8091C80085FD17 -:10F9C000ADCF8091C80085FFF8CFA8CF8091C0004F -:10F9D00085FDC1CF8091C00085FFF8CFBCCF0E94CC -:10F9E000D9F8803209F08ECD80913802813011F142 -:10F9F000823009F05ACD8091C80085FFFCCFE0929B -:10FA0000CE008091C80085FFFCCFD092CE008091BF -:10FA1000C80085FFFCCFC092CE008091C80085FF52 -:10FA2000FCCFB092CE008091C80085FFFCCFA092A1 -:10FA3000CE003BCD8091C00085FFFCCFE092C60098 -:10FA40008091C00085FFFCCFD092C6008091C0009D -:10FA500085FFFCCFC092C6008091C00085FFFCCF1F -:10FA6000B092C6008091C00085FFFCCFA092C60076 -:10FA70001CCD0E94D9F8813209F017CD0E94D9F827 -:10FA8000813209F012CD279A2F98109240032091CD -:10FA90003802E1E491E00EC0223009F4A4C0909352 -:10FAA0004003E92FF0E0E050FE4FE0819F5FEE233E -:10FAB00009F4A0C0213081F78091C00085FFFCCF00 -:10FAC000E093C600ECCF80914203816080934203B3 -:10FAD00047CE8091C00085FDB7CD8091C00085FFE5 -:10FAE000F8CFB2CD80914203816080934203CFCEA4 -:10FAF00080914203826080934203B9CE87E90E94DD -:10FB00007DF9D3CC80913D028823880F880B892111 -:10FB1000809341038BBF80913C0290913D02880FFE -:10FB2000991F90933D0280933C0280913E0380FF99 -:10FB300009C080913E0390913F03019690933F034B -:10FB400080933E03F894F999FECF1127E0913C028F -:10FB5000F0913D02CEE3D2E080913E0390913F03CD -:10FB6000103091F40091570001700130D9F303E097 -:10FB700000935700E8950091570001700130D9F3C8 -:10FB800001E100935700E895099019900091570002 -:10FB900001700130D9F301E000935700E895139507 -:10FBA000103898F011270091570001700130D9F3F7 -:10FBB00005E000935700E89500915700017001306F -:10FBC000D9F301E100935700E8953296029709F0C6 -:10FBD000C7CF103011F00296E5CF112410CE8EE180 -:10FBE0000E947DF962CC8091C80085FFFCCFE09334 -:10FBF000CE0055CF7AE0B72E6DE0A62E5AE3952EB3 -:10FC000040E2842E3DE3732E90E3692E81E3582E6B -:10FC1000213009F442C0223009F45FC00E94D9F8B3 -:10FC2000982F20913802213089F1223009F44EC0FA -:10FC3000943709F46BC0923709F405C1973709F47A -:10FC40007BC0953799F0923609F4BDC09A3601F71A -:10FC5000E0913A02F0913B02099520913802D8CF09 -:10FC60008091C00085FFFCCF9093C6000E94D9F818 -:10FC7000982F80913802813099F38230B9F78091C2 -:10FC8000C80085FFFCCF9093CE00F0CF8091C000DC -:10FC900085FFFCCF9093C600CBCF8091C00085FF3D -:10FCA000FCCFB092C6008091C00085FFFCCFA0922F -:10FCB000C6008091C00085FFFCCF9092C600809165 -:10FCC000C00085FFFCCF8092C600A8CF8091C800FD -:10FCD00085FFFCCF9093CE00ABCF8091C80085FF0D -:10FCE000FCCFB092CE008091C80085FFFCCFA092DF -:10FCF000CE008091C80085FFFCCF9092CE0080910D -:10FD0000C80085FFFCCF8092CE0088CF1F9947C0E6 -:10FD10002F9A213051F0223009F07ACF8091C8001B -:10FD200085FFFCCF6092CE0073CF8091C00085FF2D -:10FD3000FCCF6092C6006CCF0E94D9F8982F8091BA -:10FD400038028130F1F0823009F4ABC00E9455F9DD -:10FD5000082F0E9455F9182F0E94D9F8982F8091EA -:10FD600038028130A9F0823009F4A2C00E9455F90E -:10FD7000D02ECC24F601E10FF11D808320913802B2 -:10FD800047CF8091C00085FFFCCF9093C600DECFA7 -:10FD90008091C00085FFFCCF9093C600E7CF2F98DD -:10FDA000213051F0223009F033CF8091C80085FF17 -:10FDB000FCCF5092CE002CCF8091C00085FFFCCFAD -:10FDC0005092C60025CF213041F1223081F080E8E9 -:10FDD00085BF109274001092750080E091E1FC01E3 -:10FDE000819180E091E13097D1F3CF01F8CF8091FC -:10FDF000C80085FFFCCF82E68093CE008091C800CA -:10FE000085FFFCCF85E78093CE008091C80085FFF9 -:10FE1000FCCF83E78093CE00DACF8091C00085FFCE -:10FE2000FCCF82E68093C6008091C00085FFFCCFA6 -:10FE300085E78093C6008091C00085FFFCCF83E7F3 -:10FE40008093C600C4CF0E94D9F8982F80913802C1 -:10FE50008130C9F08230D1F10E9455F9182F0E94EB -:10FE600055F9982F809138028130A1F0823039F114 -:10FE7000F12EEE24F701E90FF11D80810E9494F824 -:10FE800020913802C5CE8091C00085FFFCCF9093B1 -:10FE9000C600E2CF8091C00085FFFCCF7092C60003 -:10FEA000E7CF8091C80085FFFCCF9093CE004ECF66 -:10FEB0008091C80085FFFCCF9093CE0057CF8091F2 -:10FEC000C80085FFFCCF7092CE00D2CF8091C800D1 -:0EFED00085FFFCCF9093CE00BFCFF894FFCFFC -:10FEDE0041546D656761424F4F54202F204172642B -:10FEEE0075696E6F204D656761202D20284329208E -:10FEFE0041726475696E6F204C4C43202D20303951 -:08FF0E00303933300A0D008088 -:040000031000F000F9 -:00000001FF diff --git a/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex b/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex deleted file mode 100644 index 43a8b30e..00000000 --- a/bootloaders/atmega/ATmegaBOOT_168_atmega328.hex +++ /dev/null @@ -1,125 +0,0 @@ -:107800000C94343C0C94513C0C94513C0C94513CE1 -:107810000C94513C0C94513C0C94513C0C94513CB4 -:107820000C94513C0C94513C0C94513C0C94513CA4 -:107830000C94513C0C94513C0C94513C0C94513C94 -:107840000C94513C0C94513C0C94513C0C94513C84 -:107850000C94513C0C94513C0C94513C0C94513C74 -:107860000C94513C0C94513C11241FBECFEFD8E036 -:10787000DEBFCDBF11E0A0E0B1E0ECE9FFE702C060 -:1078800005900D92A230B107D9F712E0A2E0B1E065 -:1078900001C01D92AD30B107E1F70E942D3D0C945F -:1078A000CC3F0C94003C982F959595959595959582 -:1078B000905D8F708A307CF0282F295A8091C0000B -:1078C00085FFFCCF9093C6008091C00085FFFCCF60 -:1078D0002093C6000895282F205DF0CF982F809127 -:1078E000C00085FFFCCF9093C6000895EF92FF92F1 -:1078F0000F931F93EE24FF2487018091C00087FD22 -:1079000017C00894E11CF11C011D111D81E4E8164B -:1079100082E4F8068FE0080780E0180770F3E09132 -:107920000401F091050109958091C00087FFE9CF1E -:107930008091C6001F910F91FF90EF9008950E94D3 -:10794000763C982F8091C00085FFFCCF9093C600B5 -:1079500091362CF490330CF09053892F089597555D -:10796000892F08951F930E949F3C182F0E949F3CCF -:107970001295107F810F1F9108951F93182F882350 -:1079800021F00E94763C1150E1F71F9108951F935A -:10799000182F0E94763C803249F0809103018F5F5E -:1079A000809303018530C1F01F9108958091C0003C -:1079B00085FFFCCF84E18093C6008091C00085FFE5 -:1079C000FCCF1093C6008091C00085FFFCCF80E102 -:1079D0008093C6001F910895E0910401F091050184 -:1079E00009951F9108950E94763C803241F0809164 -:1079F00003018F5F80930301853081F008958091AA -:107A0000C00085FFFCCF84E18093C6008091C00058 -:107A100085FFFCCF80E18093C6000895E0910401CA -:107A2000F09105010995089540E951E08823A1F0FE -:107A30002D9A28EE33E0FA013197F1F721503040CA -:107A4000D1F72D9828EE33E0FA013197F1F7215064 -:107A50003040D1F7815061F708953F924F925F9285 -:107A60006F927F928F929F92AF92BF92CF92DF924E -:107A7000EF92FF920F931F93CF93DF93000080E16B -:107A80008093C4001092C50088E18093C10086E015 -:107A90008093C2005098589A259A81E00E94143D24 -:107AA00024E1F22E9EE1E92E85E9D82E0FE0C02ECA -:107AB00010E1B12EAA24A394B1E49B2EA6E58A2E50 -:107AC000F2E57F2EE0E26E2E79E4572E63E5462E36 -:107AD00050E5352E0E94763C8033B1F18133B9F107 -:107AE000803409F46FC0813409F476C0823409F41B -:107AF00085C0853409F488C0803531F1823521F1A3 -:107B0000813511F1853509F485C0863509F48DC0BC -:107B1000843609F496C0843709F403C1853709F423 -:107B200072C1863709F466C0809103018F5F80932C -:107B30000301853079F6E0910401F0910501099582 -:107B40000E94763C803351F60E94F33CC3CF0E94E2 -:107B5000763C803249F78091C00085FFFCCFF092DF -:107B6000C6008091C00085FFFCCF9092C600809136 -:107B7000C00085FFFCCF8092C6008091C00085FFC9 -:107B8000FCCF7092C6008091C00085FFFCCF609250 -:107B9000C6008091C00085FFFCCF5092C600809146 -:107BA000C00085FFFCCF4092C6008091C00085FFD9 -:107BB000FCCF3092C6008091C00085FFFCCFB09210 -:107BC000C60088CF0E94763C863808F4BDCF0E945C -:107BD000763C0E94F33C7ECF0E94763C803809F4CC -:107BE0009CC0813809F40BC1823809F43CC1883942 -:107BF00009F48FC080E00E94C73C6CCF84E10E94F2 -:107C0000BD3C0E94F33C66CF85E00E94BD3C0E94D3 -:107C1000F33C60CF0E94763C809306010E94763C44 -:107C2000809307010E94F33C55CF0E94763C80333D -:107C300009F41DC183E00E94BD3C80E00E94C73C66 -:107C400049CF0E94763C809309020E94763C809343 -:107C5000080280910C028E7F80930C020E94763C79 -:107C6000853409F415C18091080290910902892B8D -:107C700089F000E010E00E94763CF801E85FFE4FDA -:107C800080830F5F1F4F80910802909109020817AF -:107C9000190788F30E94763C803209F045CF809125 -:107CA0000C0280FF01C16091060170910701660F0F -:107CB000771F7093070160930601A0910802B091AD -:107CC00009021097C9F0E8E0F1E09B01AD014E0F09 -:107CD0005F1FF999FECF32BD21BD819180BDFA9A17 -:107CE000F99A2F5F3F4FE417F50799F76A0F7B1F4B -:107CF00070930701609306018091C00085FFFCCF5F -:107D0000F092C6008091C00085FFFCCFB092C60003 -:107D1000E1CE83E00E94C73CDDCE82E00E94C73CFA -:107D2000D9CE0E94763C809309020E94763C8093D3 -:107D300008028091060190910701880F991F909386 -:107D40000701809306010E94763C853409F4A6C0A1 -:107D500080910C028E7F80930C020E94763C8032D0 -:107D600009F0B8CE8091C00085FFFCCFF092C6002C -:107D7000609108027091090261157105B9F140E046 -:107D800050E080910C02A82FA170B82FB27011C0E2 -:107D9000BB2309F45CC0E0910601F0910701319624 -:107DA000F0930701E09306014F5F5F4F46175707B7 -:107DB000E8F4AA2369F3F999FECF209106013091E6 -:107DC000070132BD21BDF89A90B58091C00085FFB2 -:107DD000FCCF9093C6002F5F3F4F30930701209355 -:107DE00006014F5F5F4F4617570718F38091C00099 -:107DF00085FDE5CE8091C00085FFF8CFE0CE81E023 -:107E00000E94C73C67CE0E94763C803209F08CCE3F -:107E10008091C00085FFFCCFF092C6008091C00029 -:107E200085FFFCCFE092C6008091C00085FFFCCFAB -:107E3000D092C6008091C00085FFFCCFC092C600E2 -:107E40008091C00085FFFCCFB092C60043CEE09188 -:107E50000601F091070194918091C00085FFFCCF4D -:107E60009093C6009CCF80E10E94C73C33CE0E9415 -:107E7000763C0E94763C182F0E94763C112309F430 -:107E800083C0113009F484C08FE00E94C73C22CE29 -:107E900080910C02816080930C02E5CE80910C02EF -:107EA000816080930C0259CF809107018823880F4D -:107EB000880B8A2180930B02809106019091070123 -:107EC000880F991F90930701809306018091080203 -:107ED00080FF09C080910802909109020196909359 -:107EE000090280930802F894F999FECF1127E091D6 -:107EF0000601F0910701C8E0D1E08091080290915D -:107F00000902103091F40091570001700130D9F34B -:107F100003E000935700E89500915700017001308D -:107F2000D9F301E100935700E89509901990009169 -:107F3000570001700130D9F301E000935700E89534 -:107F40001395103498F011270091570001700130FB -:107F5000D9F305E000935700E895009157000170B0 -:107F60000130D9F301E100935700E895329602976A -:107F700009F0C7CF103011F00296E5CF112480919F -:107F8000C00085FFB9CEBCCE8EE10E94C73CA2CD19 -:0C7F900085E90E94C73C9ECDF894FFCF0D -:027F9C00800063 -:040000030000780081 -:00000001FF diff --git a/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex b/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex deleted file mode 100644 index 9753e2e8..00000000 --- a/bootloaders/atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex +++ /dev/null @@ -1,124 +0,0 @@ -:107800000C94343C0C94513C0C94513C0C94513CE1 -:107810000C94513C0C94513C0C94513C0C94513CB4 -:107820000C94513C0C94513C0C94513C0C94513CA4 -:107830000C94513C0C94513C0C94513C0C94513C94 -:107840000C94513C0C94513C0C94513C0C94513C84 -:107850000C94513C0C94513C0C94513C0C94513C74 -:107860000C94513C0C94513C11241FBECFEFD8E036 -:10787000DEBFCDBF11E0A0E0B1E0EAE8FFE702C063 -:1078800005900D92A230B107D9F712E0A2E0B1E065 -:1078900001C01D92AD30B107E1F70E942D3D0C945F -:1078A000C33F0C94003C982F95959595959595958B -:1078B000905D8F708A307CF0282F295A8091C0000B -:1078C00085FFFCCF9093C6008091C00085FFFCCF60 -:1078D0002093C6000895282F205DF0CF982F809127 -:1078E000C00085FFFCCF9093C6000895EF92FF92F1 -:1078F0000F931F93EE24FF2487018091C00087FD22 -:1079000017C00894E11CF11C011D111D81E2E8164D -:1079100081EAF80687E0080780E0180770F3E09135 -:107920000401F091050109958091C00087FFE9CF1E -:107930008091C6001F910F91FF90EF9008950E94D3 -:10794000763C982F8091C00085FFFCCF9093C600B5 -:1079500091362CF490330CF09053892F089597555D -:10796000892F08951F930E949F3C182F0E949F3CCF -:107970001295107F810F1F9108951F93182F882350 -:1079800021F00E94763C1150E1F71F9108951F935A -:10799000182F0E94763C803249F0809103018F5F5E -:1079A000809303018530C1F01F9108958091C0003C -:1079B00085FFFCCF84E18093C6008091C00085FFE5 -:1079C000FCCF1093C6008091C00085FFFCCF80E102 -:1079D0008093C6001F910895E0910401F091050184 -:1079E00009951F9108950E94763C803241F0809164 -:1079F00003018F5F80930301853081F008958091AA -:107A0000C00085FFFCCF84E18093C6008091C00058 -:107A100085FFFCCF80E18093C6000895E0910401CA -:107A2000F09105010995089548EC50E08823A1F0F4 -:107A30002D9A28EE33E0FA013197F1F721503040CA -:107A4000D1F72D9828EE33E0FA013197F1F7215064 -:107A50003040D1F7815061F708953F924F925F9285 -:107A60006F927F928F929F92AF92BF92CF92DF924E -:107A7000EF92FF920F931F93CF93DF93000082E06A -:107A80008093C00080E18093C4001092C50088E11B -:107A90008093C10086E08093C2005098589A259A3E -:107AA00081E00E94143D24E1F22E9EE1E92E85E959 -:107AB000D82E0FE0C02E10E1B12EAA24A394B1E479 -:107AC0009B2EA6E58A2EF2E57F2EE0E26E2E79E46B -:107AD000572E63E5462E50E5352E0E94763C8033C6 -:107AE000B1F18133B9F1803409F46FC0813409F404 -:107AF00076C0823409F485C0853409F488C08035A5 -:107B000031F1823521F1813511F1853509F485C0D6 -:107B1000863509F48DC0843609F496C0843709F49B -:107B200003C1853709F472C1863709F466C08091B4 -:107B300003018F5F80930301853079F6E0910401A2 -:107B4000F091050109950E94763C803351F60E9420 -:107B5000F33CC3CF0E94763C803249F78091C0004D -:107B600085FFFCCFF092C6008091C00085FFFCCF5E -:107B70009092C6008091C00085FFFCCF8092C60025 -:107B80008091C00085FFFCCF7092C6008091C0003C -:107B900085FFFCCF6092C6008091C00085FFFCCFBE -:107BA0005092C6008091C00085FFFCCF4092C60075 -:107BB0008091C00085FFFCCF3092C6008091C0004C -:107BC00085FFFCCFB092C60088CF0E94763C8638F5 -:107BD00008F4BDCF0E94763C0E94F33C7ECF0E9409 -:107BE000763C803809F49CC0813809F40BC1823896 -:107BF00009F430C1883909F48FC080E00E94C73C85 -:107C00006CCF84E10E94BD3C0E94F33C66CF85E0CE -:107C10000E94BD3C0E94F33C60CF0E94763C809362 -:107C200006010E94763C809307010E94F33C55CFE9 -:107C30000E94763C803309F411C183E00E94BD3C70 -:107C400080E00E94C73C49CF0E94763C80930902A5 -:107C50000E94763C8093080280910C028E7F809374 -:107C60000C020E94763C853409F409C18091080217 -:107C700090910902892B89F000E010E00E94763C87 -:107C8000F801E85FFE4F80830F5F1F4F809108026D -:107C9000909109020817190788F30E94763C8032F8 -:107CA00009F045CF80910C0280FFF5C0609106017C -:107CB00070910701660F771F7093070160930601AB -:107CC000A0910802B09109021097C9F0E8E0F1E034 -:107CD0009B01AD014E0F5F1FF999FECF32BD21BD53 -:107CE000819180BDFA9AF99A2F5F3F4FE417F5070B -:107CF00099F76A0F7B1F70930701609306018091CB -:107D0000C00085FFFCCFF092C6008091C00085FFC7 -:107D1000FCCFB092C600E1CE83E00E94C73CDDCE2E -:107D200082E00E94C73CD9CE0E94763C8093090233 -:107D30000E94763C80930802809106019091070191 -:107D4000880F991F90930701809306010E94763C4B -:107D5000853409F49AC080910C028E7F80930C02C6 -:107D60000E94763C803209F0B8CE8091C00085FF39 -:107D7000FCCFF092C600A0910802B09109021097C2 -:107D8000C1F180910C02082F0170182F1695117007 -:107D9000E0910601F0910701AF014F5F5F4FBA011B -:107DA00020E030E00023B1F4112339F49491809164 -:107DB000C00085FFFCCF9093C6002F5F3F4FCB01E3 -:107DC0000196FA012A173B0780F4BC014F5F5F4F11 -:107DD000002351F3F999FECFF2BDE1BDF89A90B5B9 -:107DE0008091C00085FFFCCFE6CF709307016093C0 -:107DF00006018091C00085FDE5CE8091C00085FF21 -:107E0000F8CFE0CE81E00E94C73C67CE0E94763C6E -:107E1000803209F08CCE8091C00085FFFCCFF092BB -:107E2000C6008091C00085FFFCCFE092C600809123 -:107E3000C00085FFFCCFD092C6008091C00085FFB6 -:107E4000FCCFC092C6008091C00085FFFCCFB092ED -:107E5000C60043CE80E10E94C73C3FCE0E94763CE4 -:107E60000E94763C182F0E94763C112309F483C0AF -:107E7000113009F484C08FE00E94C73C2ECE80915F -:107E80000C02816080930C02F1CE80910C02816023 -:107E900080930C0265CF809107018823880F880B9F -:107EA0008A2180930B028091060190910701880F2F -:107EB000991F90930701809306018091080280FF2B -:107EC00009C08091080290910902019690930902DD -:107ED00080930802F894F999FECF1127E0910601EA -:107EE000F0910701C8E0D1E0809108029091090269 -:107EF000103091F40091570001700130D9F303E084 -:107F000000935700E8950091570001700130D9F3B4 -:107F100001E100935700E8950990199000915700EE -:107F200001700130D9F301E000935700E8951395F3 -:107F3000103498F011270091570001700130D9F3E7 -:107F400005E000935700E89500915700017001305B -:107F5000D9F301E100935700E8953296029709F0B2 -:107F6000C7CF103011F00296E5CF11248091C000E8 -:107F700085FFC5CEC8CE8EE10E94C73CAECD85E957 -:0A7F80000E94C73CAACDF894FFCF81 -:027F8A00800075 -:040000030000780081 -:00000001FF diff --git a/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex b/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex deleted file mode 100644 index feac9d25..00000000 --- a/bootloaders/atmega/ATmegaBOOT_168_diecimila.hex +++ /dev/null @@ -1,126 +0,0 @@ -:103800000C94341C0C94511C0C94511C0C94511CA1 -:103810000C94511C0C94511C0C94511C0C94511C74 -:103820000C94511C0C94511C0C94511C0C94511C64 -:103830000C94511C0C94511C0C94511C0C94511C54 -:103840000C94511C0C94511C0C94511C0C94511C44 -:103850000C94511C0C94511C0C94511C0C94511C34 -:103860000C94511C0C94511C11241FBECFEFD4E0BA -:10387000DEBFCDBF11E0A0E0B1E0E4EAFFE302C0AB -:1038800005900D92A230B107D9F712E0A2E0B1E0A5 -:1038900001C01D92AD30B107E1F70E94361D0C94B6 -:1038A000D01F0C94001C982F9595959595959595FE -:1038B000905D8F708A307CF0282F295A8091C0004B -:1038C00085FFFCCF9093C6008091C00085FFFCCFA0 -:1038D0002093C6000895282F205DF0CF982F809167 -:1038E000C00085FFFCCF9093C6000895EF92FF9231 -:1038F0000F931F93EE24FF2487018091C00087FD62 -:1039000017C00894E11CF11C011D111D81E4E8168B -:1039100082E4F8068FE0080780E0180770F3E09172 -:103920000401F091050109958091C00087FFE9CF5E -:103930008091C6001F910F91FF90EF9008950E9413 -:10394000761C982F8091C00085FFFCCF9093C60015 -:1039500091362CF490330CF09053892F089597559D -:10396000892F08951F930E949F1C182F0E949F1C4F -:103970001295107F810F1F910895882351F0982F81 -:1039800091508091C00087FFFCCF8091C6009923A1 -:10399000B9F708951F93182F0E94761C803249F0C2 -:1039A000809103018F5F809303018530C1F01F91E7 -:1039B00008958091C00085FFFCCF84E18093C6000C -:1039C0008091C00085FFFCCF1093C6008091C0009D -:1039D00085FFFCCF80E18093C6001F910895E091A0 -:1039E0000401F091050109951F9108950E94761C2C -:1039F000803241F0809103018F5F80930301853015 -:103A000081F008958091C00085FFFCCF84E1809310 -:103A1000C6008091C00085FFFCCF80E18093C60086 -:103A20000895E0910401F09105010995089510921F -:103A30000A028823D1F090E040E951E02D9A28EE67 -:103A400033E0FA013197F1F721503040D1F72D984A -:103A500028EE33E0FA013197F1F721503040D1F7E9 -:103A60009F5F981758F380930A0208953F924F92F0 -:103A70005F926F927F928F929F92AF92BF92CF92FE -:103A8000DF92EF92FF920F931F93CF93DF9300008B -:103A900083E38093C4001092C50088E18093C10045 -:103AA00086E08093C2005098589A259A81E00E943F -:103AB000171D44E1F42E3EE1E32E24E9D22E96E0D8 -:103AC000C92E80E1B82EAA24A39401E4902E16E515 -:103AD000812EB2E57B2EA0E26A2EF9E45F2EE3E5AB -:103AE0004E2E70E5372E0E94761C8033B1F1813363 -:103AF00009F441C0803409F479C0813409F48CC0E0 -:103B0000823471F1853409F47BC0803531F182351E -:103B100021F1813511F1853509F48DC0863509F41F -:103B20009DC0843609F4AEC0843709F41BC18537C3 -:103B300009F485C1863709F47AC0809103018F5F4B -:103B400080930301853079F6E0910401F09105013D -:103B500009950E94761C803351F60E94F61CC3CF53 -:103B600093E18091C00087FFFCCF8091C60099232C -:103B7000A1F39150F6CF0E94761C8032F1F680912D -:103B8000C00085FFFCCFF092C6008091C00085FF89 -:103B9000FCCF9092C6008091C00085FFFCCF809240 -:103BA000C6008091C00085FFFCCF7092C600809156 -:103BB000C00085FFFCCF6092C6008091C00085FFE9 -:103BC000FCCF5092C6008091C00085FFFCCF409290 -:103BD000C6008091C00085FFFCCF3092C600809166 -:103BE000C00085FFFCCFB092C6007DCF0E94761C3E -:103BF000863808F4B2CF0E94761C0E94F61C73CF60 -:103C000094E08091C00087FFFCCF8091C60099238B -:103C100009F4A3CF9150F5CF0E94761C8038D1F0E3 -:103C2000813861F1823809F499C0883979F080E0EF -:103C30000E94CA1C58CF0E94761C809306010E94E5 -:103C4000761C809307010E94F61C4DCF83E00E94F2 -:103C5000CA1C49CF82E00E94CA1C45CF0E94761C34 -:103C6000803309F486C192E08091C00087FFFCCFC9 -:103C70008091C6009923D9F29150F6CF81E00E943D -:103C8000CA1C31CF0E94761C809309020E94761CC8 -:103C90008093080280910C028E7F80930C020E9418 -:103CA000761C853429F480910C02816080930C028B -:103CB0008091080290910902892B89F000E010E0C0 -:103CC0000E94761CF801E85FFE4F80830F5F1F4F54 -:103CD00080910802909109020817190788F30E9441 -:103CE000761C803209F029CF80910C0280FFD1C070 -:103CF0004091060150910701440F551F5093070151 -:103D000040930601A0910802B09109021097C9F0F2 -:103D1000E8E0F1E09A01BD016E0F7F1FF999FECF37 -:103D200032BD21BD819180BDFA9AF99A2F5F3F4F34 -:103D3000E617F70799F74A0F5B1F50930701409367 -:103D400006018091C00085FFFCCFF092C6008091F3 -:103D5000C00085FFFCCFB092C600C5CE80E10E94B6 -:103D6000CA1CC1CE0E94761C809309020E94761C58 -:103D7000809308028091060190910701880F991F96 -:103D800090930701809306010E94761C853409F404 -:103D90007AC080910C028E7F80930C020E94761C68 -:103DA000803209F0A0CE8091C00085FFFCCFF09258 -:103DB000C600A0910802B09109021097B9F1809154 -:103DC0000C02182F1170082F0270E0910601F0917B -:103DD00007019F012F5F3F4FB90140E050E01123E1 -:103DE000B1F4002339F494918091C00085FFFCCF99 -:103DF0009093C6004F5F5F4FCB010196F9014A17C0 -:103E00005B0780F4BC012F5F3F4F112351F3F999F9 -:103E1000FECFF2BDE1BDF89A90B58091C00085FF5C -:103E2000FCCFE6CF70930701609306018091C0003C -:103E300085FDD9CE8091C00085FFF8CFD4CE0E94F9 -:103E4000761C803209F079CE8091C00085FFFCCFCE -:103E5000F092C6008091C00085FFFCCFE092C600C2 -:103E60008091C00085FFFCCFD092C6008091C00039 -:103E700085FFFCCFC092C6008091C00085FFFCCFBB -:103E8000B092C60030CE80910C02816080930C020B -:103E900085CF809107018823880F880B8A21809322 -:103EA0000B028091060190910701880F991F909352 -:103EB0000701809306018091080280FF09C080916C -:103EC00008029091090201969093090280930802DA -:103ED000F894F999FECF1127E0910601F0910701BE -:103EE000C8E0D1E08091080290910902103091F46D -:103EF0000091570001700130D9F303E0009357009F -:103F0000E8950091570001700130D9F301E1009369 -:103F10005700E89509901990009157000170013001 -:103F2000D9F301E000935700E8951395103498F009 -:103F300011270091570001700130D9F305E000937B -:103F40005700E8950091570001700130D9F301E165 -:103F500000935700E8953296029709F0C7CF1030CA -:103F600011F00296E5CF11248091C00085FFE9CEC3 -:103F7000ECCE0E94761C0E94761C182F0E94761CA4 -:103F8000112351F0113021F086E00E94CA1CABCD04 -:103F900084E90E94CA1CA7CD8EE10E94CA1CA3CD51 -:043FA000F894FFCFC3 -:023FA40080009B -:0400000300003800C1 -:00000001FF diff --git a/bootloaders/atmega/ATmegaBOOT_168_ng.hex b/bootloaders/atmega/ATmegaBOOT_168_ng.hex deleted file mode 100644 index 387091e7..00000000 --- a/bootloaders/atmega/ATmegaBOOT_168_ng.hex +++ /dev/null @@ -1,110 +0,0 @@ -:103800000C94341C0C94511C0C94511C0C94511CA1 -:103810000C94511C0C94511C0C94511C0C94511C74 -:103820000C94511C0C94511C0C94511C0C94511C64 -:103830000C94511C0C94511C0C94511C0C94511C54 -:103840000C94511C0C94511C0C94511C0C94511C44 -:103850000C94511C0C94511C0C94511C0C94511C34 -:103860000C94511C0C94511C11241FBECFEFD4E0BA -:10387000DEBFCDBF11E0A0E0B1E0E4EAFEE302C0AC -:1038800005900D92A230B107D9F712E0A2E0B1E0A5 -:1038900001C01D92AD30B107E1F70E94ED1C0C9400 -:1038A000511F0C94001C482F10920A0280E08417CC -:1038B000E0F4582F2D9A28EE33E080E991E001974B -:1038C000F1F721503040C9F72D9828EE33E080E918 -:1038D00091E00197F1F721503040C9F7852F8F5FB4 -:1038E000582F841738F380930A020895EF92FF92BD -:1038F0000F931F93EE24FF2487018091C00087FD62 -:1039000017C00894E11CF11C011D111D81E0E8168F -:1039100082E1F8068AE7080780E0180770F3E09173 -:103920000201F091030109958091C00087FFE9CF62 -:103930008091C600992787FD90951F910F91FF9068 -:10394000EF900895982F8091C00085FFFCCF909351 -:10395000C60008950E94761C803271F080910401A7 -:103960008F5F80930401853009F00895E091020192 -:10397000F09103010995089584E10E94A21C80E161 -:103980000E94A21C0895CF93C82F0E94761C8032FB -:1039900041F0809104018F5F80930401853081F4B0 -:1039A0000AC084E10E94A21C8C2F0E94A21C80E10C -:1039B0000E94A21C05C0E0910201F091030109954B -:1039C000CF910895CF93C82FC150CF3F21F00E94CF -:1039D000761CC150E0F7CF910895CFEFD4E0DEBF61 -:1039E000CDBF000083E38093C4001092C50088E13E -:1039F0008093C10086E08093C2005098589A259A1F -:103A000083E00E94531C0E94761C8033B1F1813305 -:103A1000B9F1803409F455C0813409F45BC08234B3 -:103A200009F46DC0853409F470C0803531F18235F8 -:103A300021F1813511F1853509F46BC0863509F422 -:103A400073C0843609F47AC0843709F4CEC0853750 -:103A500009F429C1863709F44AC0809104018F5FB7 -:103A600080930401853079F6E0910201F091030121 -:103A700009950E94761C803351F60E94AA1CC3CF80 -:103A80000E94761CC82F803241F784E10E94A21C5C -:103A900081E40E94A21C86E50E94A21C82E50E948D -:103AA000A21C8C2F0E94A21C89E40E94A21C83E508 -:103AB0000E94A21C80E50E94A21C80E10E94A21C20 -:103AC000A2CF0E94761C8638C0F20E94761C0E940B -:103AD000AA1C99CF0E94761C803809F486C18138CF -:103AE00009F487C1823809F488C1883921F080E05F -:103AF0000E94C31C88CF83E00E94C31C84CF84E152 -:103B00000E94E21C0E94AA1C7ECF85E00E94E21C5B -:103B1000F9CF0E94761C809306010E94761C809348 -:103B200007010E94AA1C6FCF0E94761C803309F403 -:103B3000CAC083E00E94E21C80E0DACF0E94761CBB -:103B4000809309020E94761C8093080280910C02E7 -:103B50008E7F80930C020E94761C853409F4C4C0C9 -:103B600000E010E0809108029091090218161906F1 -:103B700070F4C8E0D1E00E94761C89930F5F1F4F5C -:103B8000809108029091090208171907A0F30E947A -:103B9000761C803209F061CF80910C0280FFAEC0AC -:103BA000E0910601F0910701EE0FFF1F00E010E029 -:103BB00020910802309109021216130680F4A8E041 -:103BC000B1E0F999FECFF2BDE1BD8D9180BDFA9AC9 -:103BD000F99A31960F5F1F4F0217130790F3F09376 -:103BE0000701E093060184E166CF0E94761C809372 -:103BF00009020E94761C8093080280910601909130 -:103C00000701880F991F90930701809306010E9476 -:103C1000761C853409F46EC080910C028E7F8093EF -:103C20000C020E94761C803209F0EDCE84E10E94E5 -:103C3000A21C00E010E02091080230910902121647 -:103C4000130608F03ACFE0910601F0910701809148 -:103C50000C0280FF1FC0F999FECFF2BDE1BDF89ABA -:103C600080B50E94A21CE0910601F09107013196F7 -:103C7000F0930701E09306012091080230910902B8 -:103C80000F5F1F4F0217130708F017CF80910C0228 -:103C900080FDE1CF869580FFB4C03196F093070197 -:103CA000E0930601EDCF0E94761C803209F0D5CE5C -:103CB00084E10E94A21C8EE10E94A21C84E90E9461 -:103CC000A21C86E0F8CE0E94761C0E94761CC82FAB -:103CD0000E94761CCC2309F47CC0C13009F47DC05D -:103CE00086E00E94C31C8FCE80910C02816080937D -:103CF0000C0236CF80910C02816091CF8091070138 -:103D000087FD6FC010920B02809106019091070110 -:103D1000880F991F909307018093060180910802F4 -:103D200080FF09C08091080290910902019690934A -:103D3000090280930802F894F999FECF1127E091C7 -:103D40000601F0910701C8E0D1E08091080290914E -:103D50000902103091F40091570001700130D9F33D -:103D600003E000935700E89500915700017001307F -:103D7000D9F301E100935700E8950990199000915B -:103D8000570001700130D9F301E000935700E89526 -:103D90001395103498F011270091570001700130ED -:103DA000D9F305E000935700E895009157000170A2 -:103DB0000130D9F301E100935700E895329602975C -:103DC00009F0C7CF103011F00296E5CF112484E13D -:103DD00072CE8EE10E94C31C16CE84E90E94C31CE1 -:103DE00012CE81E080930B028FCF82E00E94C31C31 -:103DF0000ACE81E00E94C31C06CE80E10E94C31C53 -:103E000002CE84910E94A21C2091080230910902E6 -:103E1000E0910601F091070140CFCF930E94761CFC -:103E2000C82F0E94A21CC13614F0C75503C0C0336E -:103E30000CF0C0538C2F992787FD9095CF91089552 -:103E40000F931F930E940D1F082F112707FD109538 -:103E500002951295107F1027007F10270E940D1FDA -:103E6000800F992787FD90951F910F910895CF930B -:103E7000C82F85958595859585958A3034F0895A22 -:103E8000CF70CA3034F0C95A05C0805DCF70CA30D7 -:103E9000D4F7C05D0E94A21C8C2F0E94A21CCF915F -:043EA0000895FFCFB3 -:023EA40080009C -:0400000300003800C1 -:00000001FF diff --git a/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex b/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex deleted file mode 100644 index 994e4789..00000000 --- a/bootloaders/atmega/ATmegaBOOT_168_pro_8MHz.hex +++ /dev/null @@ -1,126 +0,0 @@ -:103800000C94341C0C94511C0C94511C0C94511CA1 -:103810000C94511C0C94511C0C94511C0C94511C74 -:103820000C94511C0C94511C0C94511C0C94511C64 -:103830000C94511C0C94511C0C94511C0C94511C54 -:103840000C94511C0C94511C0C94511C0C94511C44 -:103850000C94511C0C94511C0C94511C0C94511C34 -:103860000C94511C0C94511C11241FBECFEFD4E0BA -:10387000DEBFCDBF11E0A0E0B1E0EEEAFFE302C0A1 -:1038800005900D92A230B107D9F712E0A2E0B1E0A5 -:1038900001C01D92AD30B107E1F70E94331D0C94B9 -:1038A000D51F0C94001C982F9595959595959595F9 -:1038B000905D8F708A307CF0282F295A8091C0004B -:1038C00085FFFCCF9093C6008091C00085FFFCCFA0 -:1038D0002093C6000895282F205DF0CF982F809167 -:1038E000C00085FFFCCF9093C6000895EF92FF9231 -:1038F0000F931F93EE24FF2487018091C00087FD62 -:1039000017C00894E11CF11C011D111D81E2E8168D -:1039100081EAF80687E0080780E0180770F3E09175 -:103920000401F091050109958091C00087FFE9CF5E -:103930008091C6001F910F91FF90EF9008950E9413 -:10394000761C982F8091C00085FFFCCF9093C60015 -:1039500091362CF490330CF09053892F089597559D -:10396000892F08951F930E949F1C182F0E949F1C4F -:103970001295107F810F1F9108951F93182F882390 -:1039800021F00E94761C1150E1F71F9108951F93BA -:10399000182F0E94761C803249F0809103018F5FBE -:1039A000809303018530C1F01F9108958091C0007C -:1039B00085FFFCCF84E18093C6008091C00085FF25 -:1039C000FCCF1093C6008091C00085FFFCCF80E142 -:1039D0008093C6001F910895E0910401F0910501C4 -:1039E00009951F9108950E94761C803241F08091C4 -:1039F00003018F5F80930301853081F008958091EA -:103A0000C00085FFFCCF84E18093C6008091C00098 -:103A100085FFFCCF80E18093C6000895E09104010A -:103A2000F09105010995089510920A028823D1F0BA -:103A300090E048EC50E02D9A28EE33E0FA013197FF -:103A4000F1F721503040D1F72D9828EE33E0FA01FC -:103A50003197F1F721503040D1F79F5F981758F315 -:103A600080930A0208953F924F925F926F927F92E5 -:103A70008F929F92AF92BF92CF92DF92EF92FF927E -:103A80000F931F93CF93DF9394B714BE8091600080 -:103A90008861809360001092600091FF0CC289E100 -:103AA0008093C4001092C50088E18093C10086E035 -:103AB0008093C2005098589A259A81E00E94141D64 -:103AC00044E1F42E3EE1E32E24E9D22E96E0C92E05 -:103AD00080E1B82EAA24A39401E4902E16E5812E4D -:103AE000B2E57B2EA0E26A2EF9E45F2EE3E54E2ECE -:103AF00070E5372E0E94761C8033B9F18133C1F115 -:103B0000803409F470C0813409F477C0823409F438 -:103B100086C0853409F489C0803539F1823529F1B0 -:103B2000813509F4AFC1853509F485C0863509F4BE -:103B30008DC0843609F435C1843709F4C1C0853796 -:103B400009F490C0863709F466C0809103018F5F45 -:103B500080930301853071F6E0910401F091050135 -:103B600009950E94761C803349F60E94F31CC2CF4F -:103B70000E94761C803249F78091C00085FFFCCFFF -:103B8000F092C6008091C00085FFFCCF9092C600E5 -:103B90008091C00085FFFCCF8092C6008091C0005C -:103BA00085FFFCCF7092C6008091C00085FFFCCFDE -:103BB0006092C6008091C00085FFFCCF5092C60085 -:103BC0008091C00085FFFCCF4092C6008091C0006C -:103BD00085FFFCCF3092C6008091C00085FFFCCFEE -:103BE000B092C60087CF0E94761C863808F4BDCFFD -:103BF0000E94761C0E94F31C7DCF0E94761C8038A8 -:103C000009F45AC0813809F453C0823809F440C11C -:103C1000883909F449C080E00E94C71C6BCF84E159 -:103C20000E94BD1C0E94F31C65CF85E00E94BD1C54 -:103C30000E94F31C5FCF0E94761C809306010E94B5 -:103C4000761C809307010E94F31C54CF0E94761CBF -:103C5000803309F421C183E00E94BD1C80E00E94F2 -:103C6000C71C48CF0E94761C803209F06ECF80912D -:103C7000C00085FFFCCFF092C6008091C00085FF98 -:103C8000FCCFE092C6008091C00085FFFCCFD092AF -:103C9000C6008091C00085FFFCCFC092C600809115 -:103CA000C00085FFFCCF9CCF83E00E94C71C22CFC1 -:103CB00081E00E94C71C1ECF82E00E94C71C1ACF61 -:103CC0000E94761C809309020E94761C8093080251 -:103CD0008091060190910701880F991F9093070129 -:103CE000809306010E94761C853409F4C5C080913A -:103CF0000C028E7F80930C020E94761C803209F0A9 -:103D0000F9CE8091C00085FFFCCFF092C600609193 -:103D10000802709109026115710591F140E050E0CF -:103D200080910C02A82FA170B82FB27010C0BB23D5 -:103D300061F1E0910601F09107013196F0930701DE -:103D4000E09306014F5F5F4F46175707C8F4AA2359 -:103D500071F3F999FECF209106013091070132BD30 -:103D600021BDF89A90B58091C00085FFFCCF90935B -:103D7000C6002F5F3F4F3093070120930601E2CF2B -:103D80008091C00085FFFCCF2BCFE0910601F09120 -:103D9000070194918091C00085FFFCCF9093C600ED -:103DA000CCCF0E94761C809309020E94761C8093DF -:103DB000080280910C028E7F80930C020E94761C78 -:103DC000853429F480910C02816080930C028091EB -:103DD000080290910902892B89F000E010E00E940E -:103DE000761CF801E85FFE4F80830F5F1F4F8091C4 -:103DF0000802909109020817190788F30E94761C9F -:103E0000803209F0A2CE80910C0280FF62C0409106 -:103E1000060150910701440F551F5093070140932D -:103E20000601609108027091090261157105C9F0DF -:103E3000E8E0F1E09A01DB01AE0FBF1FF999FECF78 -:103E400032BD21BD819180BDFA9AF99A2F5F3F4F13 -:103E5000EA17FB0799F7460F571F50930701409346 -:103E600006018091C00085FFFCCFF092C6008091D2 -:103E7000C00085FFFCCFB4CE80910C02816080939E -:103E80000C023ACF0E94F31C88E080936000FFCFC1 -:103E900080E10E94C71C2ECE0E94761C0E94761CD8 -:103EA000182F0E94761C112381F0113051F086E00A -:103EB0000E94C71C1FCEE0910401F09105010995F5 -:103EC000EECD84E90E94C71C15CE8EE10E94C71C6E -:103ED00011CE809107018823880F880B8A21809357 -:103EE0000B028091060190910701880F991F909312 -:103EF0000701809306018091080280FF09C080912C -:103F00000802909109020196909309028093080299 -:103F1000F894F999FECF1127E0910601F09107017D -:103F2000C8E0D1E08091080290910902103091F42C -:103F30000091570001700130D9F303E0009357005E -:103F4000E8950091570001700130D9F301E1009329 -:103F50005700E895099019900091570001700130C1 -:103F6000D9F301E000935700E8951395103498F0C9 -:103F700011270091570001700130D9F305E000933B -:103F80005700E8950091570001700130D9F301E125 -:103F900000935700E8953296029709F0C7CF10308A -:0E3FA00011F00296E5CF11245CCFF894FFCF0C -:023FAE00800091 -:0400000300003800C1 -:00000001FF diff --git a/bootloaders/atmega/Makefile b/bootloaders/atmega/Makefile deleted file mode 100755 index efe92e62..00000000 --- a/bootloaders/atmega/Makefile +++ /dev/null @@ -1,238 +0,0 @@ -# Makefile for ATmegaBOOT -# E.Lins, 18.7.2005 -# -# Instructions -# -# To make bootloader .hex file: -# make diecimila -# make lilypad -# make ng -# etc... -# -# To burn bootloader .hex file: -# make diecimila_isp -# make lilypad_isp -# make ng_isp -# etc... - -# program name should not be changed... -PROGRAM = ATmegaBOOT_168 - -# enter the parameters for the avrdude isp tool -ISPTOOL = stk500v2 -ISPPORT = usb -ISPSPEED = -b 115200 - -MCU_TARGET = atmega168 -LDSECTION = --section-start=.text=0x3800 - -# the efuse should really be 0xf8; since, however, only the lower -# three bits of that byte are used on the atmega168, avrdude gets -# confused if you specify 1's for the higher bits, see: -# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ -# -# similarly, the lock bits should be 0xff instead of 0x3f (to -# unlock the bootloader section) and 0xcf instead of 0x0f (to -# lock it), but since the high two bits of the lock byte are -# unused, avrdude would get confused. - -ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ --e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m -ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ --U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m - -STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" -STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ --lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt -STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt - - -OBJ = $(PROGRAM).o -OPTIMIZE = -Os - -DEFS = -LIBS = - -CC = avr-gcc - -# Override is only needed by avr-lib build system. - -override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) -override LDFLAGS = -Wl,$(LDSECTION) -#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) - -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump - -all: - -lilypad: TARGET = lilypad -lilypad: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -lilypad: AVR_FREQ = 8000000L -lilypad: $(PROGRAM)_lilypad.hex - -lilypad_isp: lilypad -lilypad_isp: TARGET = lilypad -lilypad_isp: HFUSE = DD -lilypad_isp: LFUSE = E2 -lilypad_isp: EFUSE = 00 -lilypad_isp: isp - -lilypad_resonator: TARGET = lilypad_resonator -lilypad_resonator: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' -lilypad_resonator: AVR_FREQ = 8000000L -lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex - -lilypad_resonator_isp: lilypad_resonator -lilypad_resonator_isp: TARGET = lilypad_resonator -lilypad_resonator_isp: HFUSE = DD -lilypad_resonator_isp: LFUSE = C6 -lilypad_resonator_isp: EFUSE = 00 -lilypad_resonator_isp: isp - -pro8: TARGET = pro_8MHz -pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -pro8: AVR_FREQ = 8000000L -pro8: $(PROGRAM)_pro_8MHz.hex - -pro8_isp: pro8 -pro8_isp: TARGET = pro_8MHz -pro8_isp: HFUSE = DD -pro8_isp: LFUSE = C6 -pro8_isp: EFUSE = 00 -pro8_isp: isp - -pro16: TARGET = pro_16MHz -pro16: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -pro16: AVR_FREQ = 16000000L -pro16: $(PROGRAM)_pro_16MHz.hex - -pro16_isp: pro16 -pro16_isp: TARGET = pro_16MHz -pro16_isp: HFUSE = DD -pro16_isp: LFUSE = C6 -pro16_isp: EFUSE = 00 -pro16_isp: isp - -pro20: TARGET = pro_20mhz -pro20: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' -pro20: AVR_FREQ = 20000000L -pro20: $(PROGRAM)_pro_20mhz.hex - -pro20_isp: pro20 -pro20_isp: TARGET = pro_20mhz -pro20_isp: HFUSE = DD -pro20_isp: LFUSE = C6 -pro20_isp: EFUSE = 00 -pro20_isp: isp - -diecimila: TARGET = diecimila -diecimila: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -diecimila: AVR_FREQ = 16000000L -diecimila: $(PROGRAM)_diecimila.hex - -diecimila_isp: diecimila -diecimila_isp: TARGET = diecimila -diecimila_isp: HFUSE = DD -diecimila_isp: LFUSE = FF -diecimila_isp: EFUSE = 00 -diecimila_isp: isp - -ng: TARGET = ng -ng: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' -ng: AVR_FREQ = 16000000L -ng: $(PROGRAM)_ng.hex - -ng_isp: ng -ng_isp: TARGET = ng -ng_isp: HFUSE = DD -ng_isp: LFUSE = FF -ng_isp: EFUSE = 00 -ng_isp: isp - -atmega328: TARGET = atmega328 -atmega328: MCU_TARGET = atmega328p -atmega328: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -atmega328: AVR_FREQ = 16000000L -atmega328: LDSECTION = --section-start=.text=0x7800 -atmega328: $(PROGRAM)_atmega328.hex - -atmega328_isp: atmega328 -atmega328_isp: TARGET = atmega328 -atmega328_isp: MCU_TARGET = atmega328p -atmega328_isp: HFUSE = DA -atmega328_isp: LFUSE = FF -atmega328_isp: EFUSE = 05 -atmega328_isp: isp - -atmega328_notp: TARGET = atmega328_notp -atmega328_notp: MCU_TARGET = atmega328 -atmega328_notp: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -atmega328_notp: AVR_FREQ = 16000000L -atmega328_notp: LDSECTION = --section-start=.text=0x7800 -atmega328_notp: $(PROGRAM)_atmega328_notp.hex - -atmega328_notp_isp: atmega328_notp -atmega328_notp_isp: TARGET = atmega328 -atmega328_notp_isp: MCU_TARGET = atmega328 -atmega328_notp_isp: HFUSE = DA -atmega328_notp_isp: LFUSE = FF -atmega328_notp_isp: EFUSE = 05 -atmega328_notp_isp: isp - -atmega328_pro8: TARGET = atmega328_pro_8MHz -atmega328_pro8: MCU_TARGET = atmega328p -atmega328_pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED -atmega328_pro8: AVR_FREQ = 8000000L -atmega328_pro8: LDSECTION = --section-start=.text=0x7800 -atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex - -atmega328_pro8_isp: atmega328_pro8 -atmega328_pro8_isp: TARGET = atmega328_pro_8MHz -atmega328_pro8_isp: MCU_TARGET = atmega328p -atmega328_pro8_isp: HFUSE = DA -atmega328_pro8_isp: LFUSE = FF -atmega328_pro8_isp: EFUSE = 05 -atmega328_pro8_isp: isp - -mega: TARGET = atmega1280 -mega: MCU_TARGET = atmega1280 -mega: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 -mega: AVR_FREQ = 16000000L -mega: LDSECTION = --section-start=.text=0x1F000 -mega: $(PROGRAM)_atmega1280.hex - -mega_isp: mega -mega_isp: TARGET = atmega1280 -mega_isp: MCU_TARGET = atmega1280 -mega_isp: HFUSE = DA -mega_isp: LFUSE = FF -mega_isp: EFUSE = F5 -mega_isp: isp - -isp: $(TARGET) - $(ISPFUSES) - $(ISPFLASH) - -isp-stk500: $(PROGRAM)_$(TARGET).hex - $(STK500-1) - $(STK500-2) - -%.elf: $(OBJ) - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) - -clean: - rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex - -%.lst: %.elf - $(OBJDUMP) -h -S $< > $@ - -%.hex: %.elf - $(OBJCOPY) -j .text -j .data -O ihex $< $@ - -%.srec: %.elf - $(OBJCOPY) -j .text -j .data -O srec $< $@ - -%.bin: %.elf - $(OBJCOPY) -j .text -j .data -O binary $< $@ - diff --git a/bootloaders/atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex b/bootloaders/atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex deleted file mode 100644 index 6190d48b..00000000 --- a/bootloaders/atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex +++ /dev/null @@ -1,66 +0,0 @@ -:101C000012C02BC02AC029C028C027C026C025C0AA -:101C100024C023C022C021C020C01FC01EC01DC0C0 -:101C20001CC01BC01AC011241FBECFE5D4E0DEBF0C -:101C3000CDBF10E0A0E6B0E0E8EEFFE102C0059005 -:101C40000D92A236B107D9F711E0A2E6B0E001C0CB -:101C50001D92AA36B107E1F74FC0D2CFEF92FF92A3 -:101C60000F931F93EE24FF24870113C00894E11CF7 -:101C7000F11C011D111D81E0E81682E1F8068AE7DA -:101C8000080780E0180728F0E0916200F0916300F7 -:101C900009955F9BEBCF8CB1992787FD90951F919C -:101CA0000F91FF90EF9008955D9BFECF8CB9089542 -:101CB000D5DF803221F484E1F7DF80E1F5DF08959C -:101CC0001F93182FCBDF803231F484E1EDDF812FB9 -:101CD000EBDF80E1E9DF1F9108951F93CF93DF933E -:101CE000182FC0E0D0E002C0B9DF2196C117E0F3A1 -:101CF000DF91CF911F910895CFE5D4E0DEBFCDBF36 -:101D0000000010BC83E389B988E18AB986E880BD08 -:101D1000BD9A1092680130E2E0E0F0E02FE088B375 -:101D2000832788BBCF010197F1F7215027FFF7CF19 -:101D300020E12093680192DF803381F1813399F4AF -:101D40008DDF8032C1F784E1AFDF81E4ADDF86E56E -:101D5000ABDF82E5A9DF80E2A7DF89E4A5DF83E5C9 -:101D6000A3DF80E5C7C0803429F478DF8638B0F07F -:101D700075DF14C0813471F471DF803811F482E0B2 -:101D80001DC1813811F481E019C1823809F015C1F3 -:101D900082E114C1823421F484E19FDF89DFCBCF5B -:101DA000853411F485E0F9CF8035C1F38135B1F385 -:101DB0008235A1F3853539F451DF809364004EDF1D -:101DC00080936500EBCF863519F484E086DFF5C09B -:101DD000843609F093C042DF809367013FDF809330 -:101DE0006601809169018E7F8093690137DF8534B8 -:101DF00029F480916901816080936901C0E0D0E09D -:101E000006E610E005C02ADFF80181938F012196D4 -:101E10008091660190916701C817D907A0F31EDF72 -:101E2000803209F088CF8091690180FF1FC020E0D7 -:101E300030E0E6E6F0E012C0A0916400B0916500E9 -:101E40008191082EC5D08091640090916500019623 -:101E500090936500809364002F5F3F4F80916601EF -:101E6000909167012817390738F343C0F894E19936 -:101E7000FECF1127E0916400F0916500EE0FFF1F87 -:101E8000C6E6D0E0809166019091670180FF01C0B5 -:101E90000196103051F422D003E000935700E895EA -:101EA0001DD001E100935700E8950990199016D0D4 -:101EB00001E000935700E8951395103258F0112770 -:101EC0000DD005E000935700E89508D001E100939C -:101ED0005700E8953296029739F0DBCF0091570012 -:101EE00001700130D9F30895103011F00296E7CF58 -:101EF000112484E1D9DE80E1D7DE1DCF843709F0DB -:101F00004BC0ACDE80936701A9DE80936601A6DE3C -:101F100090916901853421F49160909369010DC01D -:101F20009E7F909369018091640090916500880F75 -:101F3000991F909365008093640090DE803209F0D1 -:101F4000FACE84E1B1DEC0E0D0E01EC0809169012C -:101F500080FF07C0A0916400B091650031D0802D52 -:101F600008C081FD07C0E0916400F0916500E49134 -:101F70008E2F9ADE80916400909165000196909377 -:101F800065008093640021968091660190916701BD -:101F9000C817D907D8F2AFCF853761F45FDE80323A -:101FA00009F0C9CE84E180DE8EE17EDE83E97CDE4D -:101FB00087E0A0CF863709F0BECE80E081DEBBCEC1 -:101FC000E199FECFBFBBAEBBE09A11960DB208956A -:101FD000E199FECFBFBBAEBB0DBA11960FB6F89418 -:081FE000E29AE19A0FBE089598 -:021FE800800077 -:0400000300001C00DD -:00000001FF diff --git a/bootloaders/atmega8/ATmegaBOOT.c b/bootloaders/atmega8/ATmegaBOOT.c deleted file mode 100644 index 8c8d22a9..00000000 --- a/bootloaders/atmega8/ATmegaBOOT.c +++ /dev/null @@ -1,507 +0,0 @@ -/**********************************************************/ -/* Serial Bootloader for Atmel mega8 AVR Controller */ -/* */ -/* ATmegaBOOT.c */ -/* */ -/* Copyright (c) 2003, Jason P. Kyle */ -/* */ -/* Hacked by DojoCorp - ZGZ - MMX - IVR */ -/* Hacked by David A. Mellis */ -/* */ -/* This program is free software; you can redistribute it */ -/* and/or modify it under the terms of the GNU General */ -/* Public License as published by the Free Software */ -/* Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will */ -/* be useful, but WITHOUT ANY WARRANTY; without even the */ -/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ -/* PARTICULAR PURPOSE. See the GNU General Public */ -/* License for more details. */ -/* */ -/* You should have received a copy of the GNU General */ -/* Public License along with this program; if not, write */ -/* to the Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* */ -/* Licence can be viewed at */ -/* http://www.fsf.org/licenses/gpl.txt */ -/* */ -/* Target = Atmel AVR m8 */ -/**********************************************************/ - -#include -#include -#include -#include -#include -#include - -//#define F_CPU 16000000 - -/* We, Malmoitians, like slow interaction - * therefore the slow baud rate ;-) - */ -//#define BAUD_RATE 9600 - -/* 6.000.000 is more or less 8 seconds at the - * speed configured here - */ -//#define MAX_TIME_COUNT 6000000 -#define MAX_TIME_COUNT (F_CPU>>1) -///#define MAX_TIME_COUNT_MORATORY 1600000 - -/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ -#define HW_VER 0x02 -#define SW_MAJOR 0x01 -#define SW_MINOR 0x12 - -// AVR-GCC compiler compatibility -// avr-gcc compiler v3.1.x and older doesn't support outb() and inb() -// if necessary, convert outb and inb to outp and inp -#ifndef outb - #define outb(sfr,val) (_SFR_BYTE(sfr) = (val)) -#endif -#ifndef inb - #define inb(sfr) _SFR_BYTE(sfr) -#endif - -/* defines for future compatibility */ -#ifndef cbi - #define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#endif -#ifndef sbi - #define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#endif - -/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ -#define eeprom_rb(addr) eeprom_read_byte ((uint8_t *)(addr)) -#define eeprom_rw(addr) eeprom_read_word ((uint16_t *)(addr)) -#define eeprom_wb(addr, val) eeprom_write_byte ((uint8_t *)(addr), (uint8_t)(val)) - -/* Onboard LED is connected to pin PB5 */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -#define LED PINB5 - - -#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( -#define SIG2 0x93 -#define SIG3 0x07 -#define PAGE_SIZE 0x20U //32 words - - -void putch(char); -char getch(void); -void getNch(uint8_t); -void byte_response(uint8_t); -void nothing_response(void); - -union address_union { - uint16_t word; - uint8_t byte[2]; -} address; - -union length_union { - uint16_t word; - uint8_t byte[2]; -} length; - -struct flags_struct { - unsigned eeprom : 1; - unsigned rampz : 1; -} flags; - -uint8_t buff[256]; -//uint8_t address_high; - -uint8_t pagesz=0x80; - -uint8_t i; -//uint8_t bootuart0=0,bootuart1=0; - - -void (*app_start)(void) = 0x0000; - -int main(void) -{ - uint8_t ch,ch2; - uint16_t w; - - //cbi(BL_DDR,BL); - //sbi(BL_PORT,BL); - - asm volatile("nop\n\t"); - - /* check if flash is programmed already, if not start bootloader anyway */ - //if(pgm_read_byte_near(0x0000) != 0xFF) { - - /* check if bootloader pin is set low */ - //if(bit_is_set(BL_PIN,BL)) app_start(); - //} - - /* initialize UART(s) depending on CPU defined */ - /* m8 */ - UBRRH = (((F_CPU/BAUD_RATE)/16)-1)>>8; // set baud rate - UBRRL = (((F_CPU/BAUD_RATE)/16)-1); - UCSRB = (1<> 8; - //UCSRA = 0x00; - //UCSRC = 0x86; - //UCSRB = _BV(TXEN)|_BV(RXEN); - - - /* this was giving uisp problems, so I removed it; without it, the boot - works on with uisp and avrdude on the mac (at least). */ - //putch('\0'); - - //uint32_t l; - //uint32_t time_count; - //time_count=0; - - /* set LED pin as output */ - sbi(LED_DDR,LED); - for (i = 0; i < 16; i++) { - outb(LED_PORT, inb(LED_PORT) ^ _BV(LED)); - _delay_loop_2(0); - } - - //for (l=0; l<40000000; l++) - //outb(LED_PORT, inb(LED_PORT) ^= _BV(LED)); - - /* flash onboard LED three times to signal entering of bootloader */ - //for(i=0; i<3; ++i) { - //for(l=0; l<40000000; ++l); - //sbi(LED_PORT,LED); - //for(l=0; l<40000000; ++l); - //cbi(LED_PORT,LED); - //} - - /* see comment at previous call to putch() */ - //putch('\0'); // this line is needed for the synchronization of the programmer - - /* forever */ - for (;;) { - //if((inb(UCSRA) & _BV(RXC))){ - /* get character from UART */ - ch = getch(); - - /* A bunch of if...else if... gives smaller code than switch...case ! */ - - /* Hello is anyone home ? */ - if(ch=='0') { - nothing_response(); - } - - /* Request programmer ID */ - /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ - /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ - else if(ch=='1') { - if (getch() == ' ') { - putch(0x14); - putch('A'); - putch('V'); - putch('R'); - putch(' '); - putch('I'); - putch('S'); - putch('P'); - putch(0x10); - } - } - - /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ - else if(ch=='@') { - ch2 = getch(); - if (ch2>0x85) getch(); - nothing_response(); - } - - /* AVR ISP/STK500 board requests */ - else if(ch=='A') { - ch2 = getch(); - if(ch2==0x80) byte_response(HW_VER); // Hardware version - else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version - else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version - //else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 - else byte_response(0x00); // Covers various unnecessary responses we don't care about - } - - /* Device Parameters DON'T CARE, DEVICE IS FIXED */ - else if(ch=='B') { - getNch(20); - nothing_response(); - } - - /* Parallel programming stuff DON'T CARE */ - else if(ch=='E') { - getNch(5); - nothing_response(); - } - - /* Enter programming mode */ - else if(ch=='P') { - nothing_response(); - // FIXME: modified only here by DojoCorp, Mumbai, India, 20050626 - //time_count=0; // exted the delay once entered prog.mode - } - - /* Leave programming mode */ - else if(ch=='Q') { - nothing_response(); - //time_count=MAX_TIME_COUNT_MORATORY; // once the programming is done, - // we should start the application - // but uisp has problems with this, - // therefore we just change the times - // and give the programmer 1 sec to react - } - - /* Erase device, don't care as we will erase one page at a time anyway. */ - else if(ch=='R') { - nothing_response(); - } - - /* Set address, little endian. EEPROM in bytes, FLASH in words */ - /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ - /* This might explain why little endian was used here, big endian used everywhere else. */ - else if(ch=='U') { - address.byte[0] = getch(); - address.byte[1] = getch(); - nothing_response(); - } - - /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ - else if(ch=='V') { - getNch(4); - byte_response(0x00); - } - - /* Write memory, length is big endian and is in bytes */ - else if(ch=='d') { - length.byte[1] = getch(); - length.byte[0] = getch(); - flags.eeprom = 0; - if (getch() == 'E') flags.eeprom = 1; - for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME - //else address_high = 0x00; - - //address.word = address.word << 1; //address * 2 -> byte location - //if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes - cli(); //Disable interrupts, just to be sure - while(bit_is_set(EECR,EEWE)); //Wait for previous EEPROM writes to complete - asm volatile( - "clr r17 \n\t" //page_word_count - "lds r30,address \n\t" //Address of FLASH location (in words) - "lds r31,address+1 \n\t" - "lsl r30 \n\t" //address * 2 -> byte location - "rol r31 \n\t" - "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM - "ldi r29,hi8(buff) \n\t" - "lds r24,length \n\t" //Length of data to be written (in bytes) - "lds r25,length+1 \n\t" - "sbrs r24,0 \n\t" //Even up an odd number of bytes - "rjmp length_loop \n\t" - "adiw r24,1 \n\t" - "length_loop: \n\t" //Main loop, repeat for number of words in block - "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page - "brne no_page_erase \n\t" - "rcall wait_spm \n\t" -// "wait_spm1: \n\t" -// "lds r16,%0 \n\t" //Wait for previous spm to complete -// "andi r16,1 \n\t" -// "cpi r16,1 \n\t" -// "breq wait_spm1 \n\t" - "ldi r16,0x03 \n\t" //Erase page pointed to by Z - "sts %0,r16 \n\t" - "spm \n\t" - "rcall wait_spm \n\t" -// "wait_spm2: \n\t" -// "lds r16,%0 \n\t" //Wait for previous spm to complete -// "andi r16,1 \n\t" -// "cpi r16,1 \n\t" -// "breq wait_spm2 \n\t" - "ldi r16,0x11 \n\t" //Re-enable RWW section - "sts %0,r16 \n\t" - "spm \n\t" - "no_page_erase: \n\t" - "ld r0,Y+ \n\t" //Write 2 bytes into page buffer - "ld r1,Y+ \n\t" - - "rcall wait_spm \n\t" -// "wait_spm3: \n\t" -// "lds r16,%0 \n\t" //Wait for previous spm to complete -// "andi r16,1 \n\t" -// "cpi r16,1 \n\t" -// "breq wait_spm3 \n\t" - "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer - "sts %0,r16 \n\t" - "spm \n\t" - - "inc r17 \n\t" //page_word_count++ - "cpi r17,%1 \n\t" - "brlo same_page \n\t" //Still same page in FLASH - "write_page: \n\t" - "clr r17 \n\t" //New page, write current one first - "rcall wait_spm \n\t" -// "wait_spm4: \n\t" -// "lds r16,%0 \n\t" //Wait for previous spm to complete -// "andi r16,1 \n\t" -// "cpi r16,1 \n\t" -// "breq wait_spm4 \n\t" - "ldi r16,0x05 \n\t" //Write page pointed to by Z - "sts %0,r16 \n\t" - "spm \n\t" - "rcall wait_spm \n\t" -// "wait_spm5: \n\t" -// "lds r16,%0 \n\t" //Wait for previous spm to complete -// "andi r16,1 \n\t" -// "cpi r16,1 \n\t" -// "breq wait_spm5 \n\t" - "ldi r16,0x11 \n\t" //Re-enable RWW section - "sts %0,r16 \n\t" - "spm \n\t" - "same_page: \n\t" - "adiw r30,2 \n\t" //Next word in FLASH - "sbiw r24,2 \n\t" //length-2 - "breq final_write \n\t" //Finished - "rjmp length_loop \n\t" - - "wait_spm: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm \n\t" - "ret \n\t" - - "final_write: \n\t" - "cpi r17,0 \n\t" - "breq block_done \n\t" - "adiw r24,2 \n\t" //length+2, fool above check on length after short page write - "rjmp write_page \n\t" - "block_done: \n\t" - "clr __zero_reg__ \n\t" //restore zero register - : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31"); - - /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ - /* exit the bootloader without a power cycle anyhow */ - } - putch(0x14); - putch(0x10); - } - } - - /* Read memory block mode, length is big endian. */ - else if(ch=='t') { - length.byte[1] = getch(); - length.byte[0] = getch(); - if (getch() == 'E') flags.eeprom = 1; - else { - flags.eeprom = 0; - address.word = address.word << 1; // address * 2 -> byte location - } - if (getch() == ' ') { // Command terminator - putch(0x14); - for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay - if (flags.eeprom) { // Byte access EEPROM read - putch(eeprom_rb(address.word)); - address.word++; - } else { - if (!flags.rampz) putch(pgm_read_byte_near(address.word)); - address.word++; - } - } - putch(0x10); - } - } - - /* Get device signature bytes */ - else if(ch=='u') { - if (getch() == ' ') { - putch(0x14); - putch(SIG1); - putch(SIG2); - putch(SIG3); - putch(0x10); - } - } - - /* Read oscillator calibration byte */ - else if(ch=='v') { - byte_response(0x00); - } -// } else { -// time_count++; -// if (time_count>=MAX_TIME_COUNT) { -// app_start(); -// } -// } - } /* end of forever loop */ -} - -void putch(char ch) -{ - /* m8 */ - while (!(inb(UCSRA) & _BV(UDRE))); - outb(UDR,ch); -} - -char getch(void) -{ - /* m8 */ - uint32_t count = 0; - while(!(inb(UCSRA) & _BV(RXC))) { - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - return (inb(UDR)); -} - -void getNch(uint8_t count) -{ - uint8_t i; - for(i=0;i $@ - -size: $(PROGRAM).hex - $(SIZE) $^ - -# Rules for building the .text rom images - -text: hex bin srec - -hex: $(PROGRAM).hex -bin: $(PROGRAM).bin -srec: $(PROGRAM).srec - -%.hex: %.elf - $(OBJCOPY) -j .text -j .data -O ihex $< $@ - -%.srec: %.elf - $(OBJCOPY) -j .text -j .data -O srec $< $@ - -%.bin: %.elf - $(OBJCOPY) -j .text -j .data -O binary $< $@ diff --git a/bootloaders/bt/ATmegaBOOT_168.c b/bootloaders/bt/ATmegaBOOT_168.c deleted file mode 100644 index d477e7a6..00000000 --- a/bootloaders/bt/ATmegaBOOT_168.c +++ /dev/null @@ -1,1043 +0,0 @@ -/**********************************************************/ -/* Serial Bootloader for Atmel megaAVR Controllers */ -/* */ -/* tested with ATmega8, ATmega128 and ATmega168 */ -/* should work with other mega's, see code for details */ -/* */ -/* ATmegaBOOT.c */ -/* */ -/* build: 050815 */ -/* date : 15.08.2005 */ -/* */ -/* 20060802: hacked for Arduino by D. Cuartielles */ -/* based on a previous hack by D. Mellis */ -/* and D. Cuartielles */ -/* */ -/* Monitor and debug functions were added to the original */ -/* code by Dr. Erik Lins, chip45.com. (See below) */ -/* */ -/* Thanks to Karl Pitrich for fixing a bootloader pin */ -/* problem and more informative LED blinking! */ -/* */ -/* For the latest version see: */ -/* http://www.chip45.com/ */ -/* */ -/* ------------------------------------------------------ */ -/* */ -/* based on stk500boot.c */ -/* Copyright (c) 2003, Jason P. Kyle */ -/* All rights reserved. */ -/* see avr1.org for original file and information */ -/* */ -/* This program is free software; you can redistribute it */ -/* and/or modify it under the terms of the GNU General */ -/* Public License as published by the Free Software */ -/* Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will */ -/* be useful, but WITHOUT ANY WARRANTY; without even the */ -/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ -/* PARTICULAR PURPOSE. See the GNU General Public */ -/* License for more details. */ -/* */ -/* You should have received a copy of the GNU General */ -/* Public License along with this program; if not, write */ -/* to the Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* */ -/* Licence can be viewed at */ -/* http://www.fsf.org/licenses/gpl.txt */ -/* */ -/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ -/* m8515,m8535. ATmega161 has a very small boot block so */ -/* isn't supported. */ -/* */ -/* Tested with m128,m8,m163 - feel free to let me know */ -/* how/if it works for you. */ -/* */ -/**********************************************************/ - - -/* some includes */ -#include -#include -#include -#include -#include - - -#define set_output(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#define set_input(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) - - -#define high(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#define low(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) - - - - -/* the current avr-libc eeprom functions do not support the ATmega168 */ -/* own eeprom write/read functions are used instead */ -#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__) || !defined(__AVR_ATmega328__) -#include -#endif - -/* define F_CPU according to AVR_FREQ set in Makefile */ -/* Is there a better way to pass such a parameter from Makefile to source code ? */ - -#define F_CPU 16000000L - -#include - - -/* 20060803: hacked by DojoCorp */ -/* set the waiting time for the bootloader */ -#define MAX_TIME_COUNT (F_CPU>>1) - -/* set the UART baud rate */ -/* 20060803: hacked by DojoCorp */ -#define BAUD_RATE 115200 - - -/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ -/* never allow AVR Studio to do an update !!!! */ -#define HW_VER 0x02 -#define SW_MAJOR 0x01 -#define SW_MINOR 0x0f - - -/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ -/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ -/* BL0... means UART0, BL1... means UART1 */ -#ifdef __AVR_ATmega128__ -#define BL_DDR DDRF -#define BL_PORT PORTF -#define BL_PIN PINF -#define BL0 PINF7 -#define BL1 PINF6 -#else -/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ -#define BL_DDR DDRD -#define BL_PORT PORTD -#define BL_PIN PIND -#define BL PIND6 -#endif - - -/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ -/* if monitor functions are included, LED goes on after monitor was entered */ -#ifdef __AVR_ATmega128__ -/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128) */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -#define LED PINB7 -#else -/* Onboard LED is connected to pin PB2 (e.g. Crumb8, Crumb168) */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -/* 20060803: hacked by DojoCorp, LED pin is B5 in Arduino */ -/* #define LED PINB2 */ -#define LED PINB5 -#endif - - -/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ -#ifdef __AVR_ATmega128__ -#define MONITOR -#endif - - -/* define various device id's */ -/* manufacturer byte is always the same */ -#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( - -#if defined __AVR_ATmega128__ -#define SIG2 0x97 -#define SIG3 0x02 -#define PAGE_SIZE 0x80U //128 words - -#elif defined __AVR_ATmega64__ -#define SIG2 0x96 -#define SIG3 0x02 -#define PAGE_SIZE 0x80U //128 words - -#elif defined __AVR_ATmega32__ -#define SIG2 0x95 -#define SIG3 0x02 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega16__ -#define SIG2 0x94 -#define SIG3 0x03 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega8__ -#define SIG2 0x93 -#define SIG3 0x07 -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega88__ -#define SIG2 0x93 -#define SIG3 0x0a -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega168__ -#define SIG2 0x94 -#define SIG3 0x06 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega328P__ -#define SIG2 0x95 -#define SIG3 0x0F -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega328__ -#define SIG2 0x95 -#define SIG3 0x14 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega162__ -#define SIG2 0x94 -#define SIG3 0x04 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega163__ -#define SIG2 0x94 -#define SIG3 0x02 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega169__ -#define SIG2 0x94 -#define SIG3 0x05 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega8515__ -#define SIG2 0x93 -#define SIG3 0x06 -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega8535__ -#define SIG2 0x93 -#define SIG3 0x08 -#define PAGE_SIZE 0x20U //32 words -#endif - - -/* function prototypes */ -void putch(char); -char getch(void); -void getNch(uint8_t); -void byte_response(uint8_t); -void nothing_response(void); -char gethex(void); -void puthex(char); -void flash_led(uint8_t); - -/* some variables */ -union address_union { - uint16_t word; - uint8_t byte[2]; -} address; - -union length_union { - uint16_t word; - uint8_t byte[2]; -} length; - -struct flags_struct { - unsigned eeprom : 1; - unsigned rampz : 1; -} flags; - -uint8_t buff[256]; -uint8_t address_high; - -uint8_t pagesz=0x80; - -uint8_t i; -uint8_t bootuart = 0; - -void (*app_start)(void) = 0x0000; - - -/* main program starts here */ -int main(void) -{ - uint8_t ch,ch2; - uint16_t w; - - asm volatile("nop\n\t"); - - /* set pin direction for bootloader pin and enable pullup */ - /* for ATmega128, two pins need to be initialized */ -#ifdef __AVR_ATmega128__ - BL_DDR &= ~_BV(BL0); - BL_DDR &= ~_BV(BL1); - BL_PORT |= _BV(BL0); - BL_PORT |= _BV(BL1); -#else - BL_DDR &= ~_BV(BL); - BL_PORT |= _BV(BL); -#endif - - -#ifdef __AVR_ATmega128__ - /* check which UART should be used for booting */ - if(bit_is_clear(BL_PIN, BL0)) { - bootuart = 1; - } - else if(bit_is_clear(BL_PIN, BL1)) { - bootuart = 2; - } -#endif - - /* check if flash is programmed already, if not start bootloader anyway */ - if(pgm_read_byte_near(0x0000) != 0xFF) { - -#ifdef __AVR_ATmega128__ - /* no UART was selected, start application */ - if(!bootuart) { - app_start(); - } -#else - /* check if bootloader pin is set low */ - /* we don't start this part neither for the m8, nor m168 */ - //if(bit_is_set(BL_PIN, BL)) { - // app_start(); - // } -#endif - } - -#ifdef __AVR_ATmega128__ - /* no bootuart was selected, default to uart 0 */ - if(!bootuart) { - bootuart = 1; - } -#endif - - - /* initialize UART(s) depending on CPU defined */ -#ifdef __AVR_ATmega128__ - if(bootuart == 1) { - UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSR0A = 0x00; - UCSR0C = 0x06; - UCSR0B = _BV(TXEN0)|_BV(RXEN0); - } - if(bootuart == 2) { - UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSR1A = 0x00; - UCSR1C = 0x06; - UCSR1B = _BV(TXEN1)|_BV(RXEN1); - } -#elif defined __AVR_ATmega163__ - UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSRA = 0x00; - UCSRB = _BV(TXEN)|_BV(RXEN); -#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) - - UBRR0H = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1) >> 8; - UBRR0L = ((F_CPU / 16 + BAUD_RATE / 2) / BAUD_RATE - 1); - - - //UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - //UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSR0B = (1<>8; // set baud rate - UBRRL = (((F_CPU/BAUD_RATE)/16)-1); - UCSRB = (1<> 8; - UCSRA = 0x00; - UCSRC = 0x06; - UCSRB = _BV(TXEN)|_BV(RXEN); -#endif - - /* set LED pin as output */ - LED_DDR |= _BV(LED); - - - - set_output(DDRD,PIND7); - high(PORTD,PD7); - for (i = 0; i < 16; i++) { - - _delay_loop_2(0); - } - - - low(PORTD,PD7); - - - /* flash onboard LED to signal entering of bootloader */ -#ifdef __AVR_ATmega128__ - // 4x for UART0, 5x for UART1 - flash_led(3 + bootuart); -#else - flash_led(3); -#endif - - /* 20050803: by DojoCorp, this is one of the parts provoking the - system to stop listening, cancelled from the original */ - //putch('\0'); - - - //message("SET BT PAGEMODE 3 2000 1"); -putch('S'); -putch('E'); -putch('T'); -putch(' '); -putch('B'); -putch('T'); -putch(' '); -putch('P'); -putch('A'); -putch('G'); -putch('E'); -putch('M'); -putch('O'); -putch('D'); -putch('E'); -putch(' '); -putch('3'); -putch(' '); -putch('2'); -putch('0'); -putch('0'); -putch('0'); -putch(' '); -putch('1'); -putch(0x0D); - - - //put_s("SET BT ROLE 0 f 7d00"); - putch('S'); - putch('E'); - putch('T'); - putch(' '); - putch('B'); - putch('T'); - putch(' '); - putch('R'); - putch('O'); - putch('L'); - putch('E'); - putch(' '); - putch('0'); - putch(' '); - putch('f'); - putch(' '); - putch('7'); - putch('d'); - putch('0'); - putch('0'); - putch(0x0D); - - - - - - - /* forever loop */ - for (;;) { - - /* get character from UART */ - ch = getch(); - - /* A bunch of if...else if... gives smaller code than switch...case ! */ - - /* Hello is anyone home ? */ - if(ch=='0') { - nothing_response(); - } - - - /* Request programmer ID */ - /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ - /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ - else if(ch=='1') { - if (getch() == ' ') { - putch(0x14); - putch('A'); - putch('V'); - putch('R'); - putch(' '); - putch('I'); - putch('S'); - putch('P'); - putch(0x10); - } - } - - - /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ - else if(ch=='@') { - ch2 = getch(); - if (ch2>0x85) getch(); - nothing_response(); - } - - - /* AVR ISP/STK500 board requests */ - else if(ch=='A') { - ch2 = getch(); - if(ch2==0x80) byte_response(HW_VER); // Hardware version - else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version - else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version - else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 - else byte_response(0x00); // Covers various unnecessary responses we don't care about - } - - - /* Device Parameters DON'T CARE, DEVICE IS FIXED */ - else if(ch=='B') { - getNch(20); - nothing_response(); - } - - - /* Parallel programming stuff DON'T CARE */ - else if(ch=='E') { - getNch(5); - nothing_response(); - } - - - /* Enter programming mode */ - else if(ch=='P') { - nothing_response(); - } - - - /* Leave programming mode */ - else if(ch=='Q') { - nothing_response(); - } - - - /* Erase device, don't care as we will erase one page at a time anyway. */ - else if(ch=='R') { - nothing_response(); - } - - - /* Set address, little endian. EEPROM in bytes, FLASH in words */ - /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ - /* This might explain why little endian was used here, big endian used everywhere else. */ - else if(ch=='U') { - address.byte[0] = getch(); - address.byte[1] = getch(); - nothing_response(); - } - - - /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ - else if(ch=='V') { - getNch(4); - byte_response(0x00); - } - - - /* Write memory, length is big endian and is in bytes */ - else if(ch=='d') { - length.byte[1] = getch(); - length.byte[0] = getch(); - flags.eeprom = 0; - if (getch() == 'E') flags.eeprom = 1; - for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME - else address_high = 0x00; -#ifdef __AVR_ATmega128__ - RAMPZ = address_high; -#endif - address.word = address.word << 1; //address * 2 -> byte location - /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ - if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes - cli(); //Disable interrupts, just to be sure - // HACKME: EEPE used to be EEWE - while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete - asm volatile( - "clr r17 \n\t" //page_word_count - "lds r30,address \n\t" //Address of FLASH location (in bytes) - "lds r31,address+1 \n\t" - "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM - "ldi r29,hi8(buff) \n\t" - "lds r24,length \n\t" //Length of data to be written (in bytes) - "lds r25,length+1 \n\t" - "length_loop: \n\t" //Main loop, repeat for number of words in block - "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page - "brne no_page_erase \n\t" - "wait_spm1: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm1 \n\t" - "ldi r16,0x03 \n\t" //Erase page pointed to by Z - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "wait_spm2: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm2 \n\t" - - "ldi r16,0x11 \n\t" //Re-enable RWW section - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "no_page_erase: \n\t" - "ld r0,Y+ \n\t" //Write 2 bytes into page buffer - "ld r1,Y+ \n\t" - - "wait_spm3: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm3 \n\t" - "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer - "sts %0,r16 \n\t" - "spm \n\t" - - "inc r17 \n\t" //page_word_count++ - "cpi r17,%1 \n\t" - "brlo same_page \n\t" //Still same page in FLASH - "write_page: \n\t" - "clr r17 \n\t" //New page, write current one first - "wait_spm4: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm4 \n\t" -#ifdef __AVR_ATmega163__ - "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write -#endif - "ldi r16,0x05 \n\t" //Write page pointed to by Z - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" - "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) -#endif - "wait_spm5: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm5 \n\t" - "ldi r16,0x11 \n\t" //Re-enable RWW section - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "same_page: \n\t" - "adiw r30,2 \n\t" //Next word in FLASH - "sbiw r24,2 \n\t" //length-2 - "breq final_write \n\t" //Finished - "rjmp length_loop \n\t" - "final_write: \n\t" - "cpi r17,0 \n\t" - "breq block_done \n\t" - "adiw r24,2 \n\t" //length+2, fool above check on length after short page write - "rjmp write_page \n\t" - "block_done: \n\t" - "clr __zero_reg__ \n\t" //restore zero register -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega_328__) - : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" -#else - : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" -#endif - ); - /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ - /* exit the bootloader without a power cycle anyhow */ - } - putch(0x14); - putch(0x10); - } - } - - - /* Read memory block mode, length is big endian. */ - else if(ch=='t') { - length.byte[1] = getch(); - length.byte[0] = getch(); -#if defined __AVR_ATmega128__ - if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME - else flags.rampz = 0; -#endif - if (getch() == 'E') flags.eeprom = 1; - else { - flags.eeprom = 0; - address.word = address.word << 1; // address * 2 -> byte location - } - if (getch() == ' ') { // Command terminator - putch(0x14); - for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay - if (flags.eeprom) { // Byte access EEPROM read -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) - while(EECR & (1<= 'a') { - ah = ah - 'a' + 0x0a; - } else if(ah >= '0') { - ah -= '0'; - } - if(al >= 'a') { - al = al - 'a' + 0x0a; - } else if(al >= '0') { - al -= '0'; - } - return (ah << 4) + al; -} - - -void puthex(char ch) { - char ah,al; - - ah = (ch & 0xf0) >> 4; - if(ah >= 0x0a) { - ah = ah - 0x0a + 'a'; - } else { - ah += '0'; - } - al = (ch & 0x0f); - if(al >= 0x0a) { - al = al - 0x0a + 'a'; - } else { - al += '0'; - } - putch(ah); - putch(al); -} - - -void putch(char ch) -{ -#ifdef __AVR_ATmega128__ - if(bootuart == 1) { - while (!(UCSR0A & _BV(UDRE0))); - UDR0 = ch; - } - else if (bootuart == 2) { - while (!(UCSR1A & _BV(UDRE1))); - UDR1 = ch; - } -#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) - while (!(UCSR0A & _BV(UDRE0))); - UDR0 = ch; -#else - /* m8,16,32,169,8515,8535,163 */ - while (!(UCSRA & _BV(UDRE))); - UDR = ch; -#endif -} - - -char getch(void) -{ -#ifdef __AVR_ATmega128__ - if(bootuart == 1) { - while(!(UCSR0A & _BV(RXC0))); - return UDR0; - } - else if(bootuart == 2) { - while(!(UCSR1A & _BV(RXC1))); - return UDR1; - } - return 0; -#elif defined (__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) - uint32_t count = 0; - while(!(UCSR0A & _BV(RXC0))){ - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - return UDR0; -#else - /* m8,16,32,169,8515,8535,163 */ - uint32_t count = 0; - while(!(UCSRA & _BV(RXC))){ - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - return UDR; -#endif -} - - -void getNch(uint8_t count) -{ - uint8_t i; - for(i=0;i $@ - -%.hex: %.elf - $(OBJCOPY) -j .text -j .data -O ihex $< $@ - -%.srec: %.elf - $(OBJCOPY) -j .text -j .data -O srec $< $@ - -%.bin: %.elf - $(OBJCOPY) -j .text -j .data -O binary $< $@ - diff --git a/bootloaders/gemma/README.md b/bootloaders/gemma/README.md deleted file mode 100644 index 2653e48c..00000000 --- a/bootloaders/gemma/README.md +++ /dev/null @@ -1,14 +0,0 @@ -Arduino Gemma Bootloader -======================== - -The Arduino Gemma Bootloader is based on the Adafruit Trinket/Gemma Bootloader. In the Arduino Gemma bootloader the USB VID&PID, the Manufacturer name and the Device name parameters are changed. - -The source code of the bootloader of the version used at the compile time can be found at the following link: https://github.com/adafruit/Adafruit-Trinket-Gemma-Bootloader/tree/3bc1bb561273535d4d493518a233a3a1fccf6b76 - -The *'usbconfig.h'* and the *'usbconfig.patch'* files are provided if you want to recompile the bootloader. -You only need to replace the original *'usbconfig.h'* file with this one or patch it with the provided patch file. - -**Please note: you cannot use the Arduino USB VID/PID for your own non-Gemma products or projects. Purchase a USB VID for yourself at** http://www.usb.org/developers/vendor/ - - - diff --git a/bootloaders/gemma/avrdude.conf b/bootloaders/gemma/avrdude.conf deleted file mode 100644 index 2e1aebbc..00000000 --- a/bootloaders/gemma/avrdude.conf +++ /dev/null @@ -1,14389 +0,0 @@ -# AVRDUDE Configuration File -# -# This file contains configuration data used by AVRDUDE which describes -# the programming hardware pinouts and also provides part definitions. -# AVRDUDE's "-C" command line option specifies the location of the -# configuration file. The "-c" option names the programmer configuration -# which must match one of the entry's "id" parameter. The "-p" option -# identifies which part AVRDUDE is going to be programming and must match -# one of the parts' "id" parameter. -# -# Possible entry formats are: -# -# programmer -# parent # optional parent -# id = [, [, ] ...] ; # are quoted strings -# desc = ; # quoted string -# type = ; # programmer type, quoted string -# # supported programmer types can be listed by "-c ?type" -# connection_type = parallel | serial | usb -# baudrate = ; # baudrate for avr910-programmer -# vcc = [, ... ] ; # pin number(s) -# buff = [, ... ] ; # pin number(s) -# reset = ; # pin number -# sck = ; # pin number -# mosi = ; # pin number -# miso = ; # pin number -# errled = ; # pin number -# rdyled = ; # pin number -# pgmled = ; # pin number -# vfyled = ; # pin number -# usbvid = ; # USB VID (Vendor ID) -# usbpid = ; # USB PID (Product ID) -# usbdev = ; # USB interface or other device info -# usbvendor = ; # USB Vendor Name -# usbproduct = ; # USB Product Name -# usbsn = ; # USB Serial Number -# -# To invert a bit, use = ~ , the spaces are important. -# For a pin list all pins must be inverted. -# A single pin can be specified as usual = ~ , for lists -# specify it as follows = ~ ( [, ... ] ) . -# ; -# -# part -# id = ; # quoted string -# desc = ; # quoted string -# has_jtag = ; # part has JTAG i/f -# has_debugwire = ; # part has debugWire i/f -# has_pdi = ; # part has PDI i/f -# has_tpi = ; # part has TPI i/f -# devicecode = ; # deprecated, use stk500_devcode -# stk500_devcode = ; # numeric -# avr910_devcode = ; # numeric -# signature = ; # signature bytes -# chip_erase_delay = ; # micro-seconds -# reset = dedicated | io; -# retry_pulse = reset | sck; -# pgm_enable = ; -# chip_erase = ; -# chip_erase_delay = ; # chip erase delay (us) -# # STK500 parameters (parallel programming IO lines) -# pagel = ; # pin name in hex, i.e., 0xD7 -# bs2 = ; # pin name in hex, i.e., 0xA0 -# serial = ; # can use serial downloading -# parallel = ; # can use par. programming -# # STK500v2 parameters, to be taken from Atmel's XML files -# timeout = ; -# stabdelay = ; -# cmdexedelay = ; -# synchloops = ; -# bytedelay = ; -# pollvalue = ; -# pollindex = ; -# predelay = ; -# postdelay = ; -# pollmethod = ; -# mode = ; -# delay = ; -# blocksize = ; -# readsize = ; -# hvspcmdexedelay = ; -# # STK500v2 HV programming parameters, from XML -# pp_controlstack = , , ...; # PP only -# hvsp_controlstack = , , ...; # HVSP only -# hventerstabdelay = ; -# progmodedelay = ; # PP only -# latchcycles = ; -# togglevtg = ; -# poweroffdelay = ; -# resetdelayms = ; -# resetdelayus = ; -# hvleavestabdelay = ; -# resetdelay = ; -# synchcycles = ; # HVSP only -# chiperasepulsewidth = ; # PP only -# chiperasepolltimeout = ; -# chiperasetime = ; # HVSP only -# programfusepulsewidth = ; # PP only -# programfusepolltimeout = ; -# programlockpulsewidth = ; # PP only -# programlockpolltimeout = ; -# # JTAG ICE mkII parameters, also from XML files -# allowfullpagebitstream = ; -# enablepageprogramming = ; -# idr = ; # IO addr of IDR (OCD) reg. -# rampz = ; # IO addr of RAMPZ reg. -# spmcr = ; # mem addr of SPMC[S]R reg. -# eecr = ; # mem addr of EECR reg. -# # (only when != 0x3c) -# is_at90s1200 = ; # AT90S1200 part -# is_avr32 = ; # AVR32 part -# -# memory -# paged = ; # yes / no -# size = ; # bytes -# page_size = ; # bytes -# num_pages = ; # numeric -# min_write_delay = ; # micro-seconds -# max_write_delay = ; # micro-seconds -# readback_p1 = ; # byte value -# readback_p2 = ; # byte value -# pwroff_after_write = ; # yes / no -# read = ; -# write = ; -# read_lo = ; -# read_hi = ; -# write_lo = ; -# write_hi = ; -# loadpage_lo = ; -# loadpage_hi = ; -# writepage = ; -# ; -# ; -# -# If any of the above parameters are not specified, the default value -# of 0 is used for numerics or the empty string ("") for string -# values. If a required parameter is left empty, AVRDUDE will -# complain. -# -# Parts can also inherit parameters from previously defined parts -# using the following syntax. In this case specified integer and -# string values override parameter values from the parent part. New -# memory definitions are added to the definitions inherited from the -# parent. -# -# part parent # quoted string -# id = ; # quoted string -# -# ; -# -# NOTES: -# * 'devicecode' is the device code used by the STK500 (see codes -# listed below) -# * Not all memory types will implement all instructions. -# * AVR Fuse bits and Lock bits are implemented as a type of memory. -# * Example memory types are: -# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high -# fuse), "signature", "calibration", "lock" -# * The memory type specified on the avrdude command line must match -# one of the memory types defined for the specified chip. -# * The pwroff_after_write flag causes avrdude to attempt to -# power the device off and back on after an unsuccessful write to -# the affected memory area if VCC programmer pins are defined. If -# VCC pins are not defined for the programmer, a message -# indicating that the device needs a power-cycle is printed out. -# This flag was added to work around a problem with the -# at90s4433/2333's; see the at90s4433 errata at: -# -# http://www.atmel.com/dyn/resources/prod_documents/doc1280.pdf -# -# INSTRUCTION FORMATS -# -# Instruction formats are specified as a comma seperated list of -# string values containing information (bit specifiers) about each -# of the 32 bits of the instruction. Bit specifiers may be one of -# the following formats: -# -# '1' = the bit is always set on input as well as output -# -# '0' = the bit is always clear on input as well as output -# -# 'x' = the bit is ignored on input and output -# -# 'a' = the bit is an address bit, the bit-number matches this bit -# specifier's position within the current instruction byte -# -# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12 -# is address bit 12 on input, a0 is address bit 0. -# -# 'i' = the bit is an input data bit -# -# 'o' = the bit is an output data bit -# -# Each instruction must be composed of 32 bit specifiers. The -# instruction specification closely follows the instruction data -# provided in Atmel's data sheets for their parts. -# -# See below for some examples. -# -# -# The following are STK500 part device codes to use for the -# "devicecode" field of the part. These came from Atmel's software -# section avr061.zip which accompanies the application note -# AVR061 available from: -# -# http://www.atmel.com/dyn/resources/prod_documents/doc2525.pdf -# - -#define ATTINY10 0x10 /* the _old_ one that never existed! */ -#define ATTINY11 0x11 -#define ATTINY12 0x12 -#define ATTINY15 0x13 -#define ATTINY13 0x14 - -#define ATTINY22 0x20 -#define ATTINY26 0x21 -#define ATTINY28 0x22 -#define ATTINY2313 0x23 - -#define AT90S1200 0x33 - -#define AT90S2313 0x40 -#define AT90S2323 0x41 -#define AT90S2333 0x42 -#define AT90S2343 0x43 - -#define AT90S4414 0x50 -#define AT90S4433 0x51 -#define AT90S4434 0x52 -#define ATMEGA48 0x59 - -#define AT90S8515 0x60 -#define AT90S8535 0x61 -#define AT90C8534 0x62 -#define ATMEGA8515 0x63 -#define ATMEGA8535 0x64 - -#define ATMEGA8 0x70 -#define ATMEGA88 0x73 -#define ATMEGA168 0x86 - -#define ATMEGA161 0x80 -#define ATMEGA163 0x81 -#define ATMEGA16 0x82 -#define ATMEGA162 0x83 -#define ATMEGA169 0x84 - -#define ATMEGA323 0x90 -#define ATMEGA32 0x91 - -#define ATMEGA64 0xA0 - -#define ATMEGA103 0xB1 -#define ATMEGA128 0xB2 -#define AT90CAN128 0xB3 -#define AT90CAN64 0xB3 -#define AT90CAN32 0xB3 - -#define AT86RF401 0xD0 - -#define AT89START 0xE0 -#define AT89S51 0xE0 -#define AT89S52 0xE1 - -# The following table lists the devices in the original AVR910 -# appnote: -# |Device |Signature | Code | -# +-------+----------+------+ -# |tiny12 | 1E 90 05 | 0x55 | -# |tiny15 | 1E 90 06 | 0x56 | -# | | | | -# | S1200 | 1E 90 01 | 0x13 | -# | | | | -# | S2313 | 1E 91 01 | 0x20 | -# | S2323 | 1E 91 02 | 0x48 | -# | S2333 | 1E 91 05 | 0x34 | -# | S2343 | 1E 91 03 | 0x4C | -# | | | | -# | S4414 | 1E 92 01 | 0x28 | -# | S4433 | 1E 92 03 | 0x30 | -# | S4434 | 1E 92 02 | 0x6C | -# | | | | -# | S8515 | 1E 93 01 | 0x38 | -# | S8535 | 1E 93 03 | 0x68 | -# | | | | -# |mega32 | 1E 95 01 | 0x72 | -# |mega83 | 1E 93 05 | 0x65 | -# |mega103| 1E 97 01 | 0x41 | -# |mega161| 1E 94 01 | 0x60 | -# |mega163| 1E 94 02 | 0x64 | - -# Appnote AVR109 also has a table of AVR910 device codes, which -# lists: -# dev avr910 signature -# ATmega8 0x77 0x1E 0x93 0x07 -# ATmega8515 0x3B 0x1E 0x93 0x06 -# ATmega8535 0x6A 0x1E 0x93 0x08 -# ATmega16 0x75 0x1E 0x94 0x03 -# ATmega162 0x63 0x1E 0x94 0x04 -# ATmega163 0x66 0x1E 0x94 0x02 -# ATmega169 0x79 0x1E 0x94 0x05 -# ATmega32 0x7F 0x1E 0x95 0x02 -# ATmega323 0x73 0x1E 0x95 0x01 -# ATmega64 0x46 0x1E 0x96 0x02 -# ATmega128 0x44 0x1E 0x97 0x02 -# -# These codes refer to "BOOT" device codes which are apparently -# different than standard device codes, for whatever reasons -# (often one above the standard code). - -# There are several extended versions of AVR910 implementations around -# in the Internet. These add the following codes (only devices that -# actually exist are listed): - -# ATmega8515 0x3A -# ATmega128 0x43 -# ATmega64 0x45 -# ATtiny26 0x5E -# ATmega8535 0x69 -# ATmega32 0x72 -# ATmega16 0x74 -# ATmega8 0x76 -# ATmega169 0x78 - -# -# Overall avrdude defaults; suitable for ~/.avrduderc -# -default_parallel = "/dev/parport0"; -default_serial = "/dev/ttyS0"; -# default_bitclock = 2.5; - -# Turn off safemode by default -#default_safemode = no; - - -# -# PROGRAMMER DEFINITIONS -# - -# http://wiring.org.co/ -# Basically STK500v2 protocol, with some glue to trigger the -# bootloader. -programmer - id = "wiring"; - desc = "Wiring"; - type = "wiring"; - connection_type = serial; -; - -programmer - id = "arduino"; - desc = "Arduino"; - type = "arduino"; - connection_type = serial; -; -# this will interface with the chips on these programmers: -# -# http://real.kiev.ua/old/avreal/en/adapters -# http://www.amontec.com/jtagkey.shtml, jtagkey-tiny.shtml -# http://www.olimex.com/dev/arm-usb-ocd.html, arm-usb-tiny.html -# http://www.ethernut.de/en/hardware/turtelizer/index.html -# http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html -# http://dangerousprototypes.com/docs/FT2232_breakout_board -# http://www.ftdichip.com/Products/Modules/DLPModules.htm,DLP-2232*,DLP-USB1232H -# http://flashrom.org/FT2232SPI_Programmer -# -# The drivers will look for a specific device and use the first one found. -# If you have mulitple devices, then look for unique information (like SN) -# And fill that in here. -# -# Note that the pin numbers for the main ISP signals (reset, sck, -# mosi, miso) are fixed and cannot be changed, since they must match -# the way the Multi-Protocol Synchronous Serial Engine (MPSSE) of -# these FTDI ICs has been designed. - -programmer - id = "avrftdi"; - desc = "FT2232D based generic programmer"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; - usbpid = 0x6010; - usbvendor = ""; - usbproduct = ""; - usbdev = "A"; - usbsn = ""; -#ISP-signals - lower ADBUS-Nibble (default) - reset = 3; - sck = 0; - mosi = 1; - miso = 2; -#LED SIGNALs - higher ADBUS-Nibble -# errled = 4; -# rdyled = 5; -# pgmled = 6; -# vfyled = 7; -#Buffer Signal - ACBUS - Nibble -# buff = 8; -; -# This is an implementation of the above with a buffer IC (74AC244) and -# 4 LEDs directly attached, all active low. -programmer - id = "2232HIO"; - desc = "FT2232H based generic programmer"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; -# Note: This PID is reserved for generic H devices and -# should be programmed into the EEPROM -# usbpid = 0x8A48; - usbpid = 0x6010; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; -#ISP-signals - reset = 3; - sck = 0; - mosi = 1; - miso = 2; - buff = ~4; -#LED SIGNALs - errled = ~ 11; - rdyled = ~ 14; - pgmled = ~ 13; - vfyled = ~ 12; -; - -#The FT4232H can be treated as FT2232H, but it has a different USB -#device ID of 0x6011. -programmer parent "avrftdi" - id = "4232h"; - desc = "FT4232H based generic programmer"; - usbpid = 0x6011; -; - -programmer - id = "jtagkey"; - desc = "Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; -# Note: This PID is used in all JTAGKey variants - usbpid = 0xCFF8; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; -#ISP-signals => 20 - Pin connector on JTAGKey - reset = 3; # TMS 7 violet - sck = 0; # TCK 9 white - mosi = 1; # TDI 5 green - miso = 2; # TDO 13 orange - buff = ~4; -# VTG VREF 1 brown with red tip -# GND GND 20 black -# The colors are on the 20 pin breakout cable -# from Amontec -; - -# On the adapter you can read "O-Link". On the PCB is printed "OpenJTAG v3.1" -# You can find it as "OpenJTAG ARM JTAG USB" in the internet. -# (But there are also several projects called Open JTAG, eg. -# http://www.openjtag.org, which are completely different.) -# http://www.100ask.net/shop/english.html (website seems to be outdated) -# http://item.taobao.com/item.htm?id=1559277013 -# http://www.micro4you.com/store/openjtag-arm-jtag-usb.html (schematics!) -# some other sources which call it O-Link -# http://www.andahammer.com/olink/ -# http://www.developmentboard.net/31-o-link-debugger.html -# http://armwerks.com/catalog/o-link-debugger-copy/ -# or just have a look at ebay ... -# It is basically the same entry as jtagkey with different usb ids. -programmer parent "jtagkey" - id = "o-link"; - desc = "O-Link, OpenJTAG from www.100ask.net"; - usbvid = 0x1457; - usbpid = 0x5118; - usbvendor = "www.100ask.net"; - usbproduct = "USB<=>JTAG&RS232"; -; - -# http://wiki.openmoko.org/wiki/Debug_Board_v3 -programmer - id = "openmoko"; - desc = "Openmoko debug board (v3)"; - type = "avrftdi"; - usbvid = 0x1457; - usbpid = 0x5118; - usbdev = "A"; - usbvendor = ""; - usbproduct = ""; - usbsn = ""; - reset = 3; # TMS 7 - sck = 0; # TCK 9 - mosi = 1; # TDI 5 - miso = 2; # TDO 13 -; - -# Only Rev. A boards. -# Schematic and user manual: http://www.cs.put.poznan.pl/wswitala/download/pdf/811EVBK.pdf -programmer - id = "lm3s811"; - desc = "Luminary Micro LM3S811 Eval Board (Rev. A)"; - type = "avrftdi"; - connection_type = usb; - usbvid = 0x0403; - usbpid = 0xbcd9; - usbvendor = "LMI"; - usbproduct = "LM3S811 Evaluation Board"; - usbdev = "A"; - usbsn = ""; -#ISP-signals - lower ACBUS-Nibble (default) - reset = 3; - sck = 0; - mosi = 1; - miso = 2; -# Enable correct buffers - buff = 7; -; - -programmer - id = "avrisp"; - desc = "Atmel AVR ISP"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "avrispv2"; - desc = "Atmel AVR ISP V2"; - type = "stk500v2"; - connection_type = serial; -; - -programmer - id = "avrispmkII"; - desc = "Atmel AVR ISP mkII"; - type = "stk500v2"; - connection_type = usb; -; - -programmer parent "avrispmkII" - id = "avrisp2"; -; - -programmer - id = "buspirate"; - desc = "The Bus Pirate"; - type = "buspirate"; - connection_type = serial; -; - -programmer - id = "buspirate_bb"; - desc = "The Bus Pirate (bitbang interface, supports TPI)"; - type = "buspirate_bb"; - connection_type = serial; - # pins are bits in bitbang byte (numbers are 87654321) - # 1|POWER|PULLUP|AUX|MOSI|CLK|MISO|CS - reset = 1; - sck = 3; - mosi = 4; - miso = 2; - #vcc = 7; This is internally set independent of this setting. -; - -# This is supposed to be the "default" STK500 entry. -# Attempts to select the correct firmware version -# by probing for it. Better use one of the entries -# below instead. -programmer - id = "stk500"; - desc = "Atmel STK500"; - type = "stk500generic"; - connection_type = serial; -; - -programmer - id = "stk500v1"; - desc = "Atmel STK500 Version 1.x firmware"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "mib510"; - desc = "Crossbow MIB510 programming board"; - type = "stk500"; - connection_type = serial; -; - -programmer - id = "stk500v2"; - desc = "Atmel STK500 Version 2.x firmware"; - type = "stk500v2"; - connection_type = serial; -; - -programmer - id = "stk500pp"; - desc = "Atmel STK500 V2 in parallel programming mode"; - type = "stk500pp"; - connection_type = serial; -; - -programmer - id = "stk500hvsp"; - desc = "Atmel STK500 V2 in high-voltage serial programming mode"; - type = "stk500hvsp"; - connection_type = serial; -; - -programmer - id = "stk600"; - desc = "Atmel STK600"; - type = "stk600"; - connection_type = usb; -; - -programmer - id = "stk600pp"; - desc = "Atmel STK600 in parallel programming mode"; - type = "stk600pp"; - connection_type = usb; -; - -programmer - id = "stk600hvsp"; - desc = "Atmel STK600 in high-voltage serial programming mode"; - type = "stk600hvsp"; - connection_type = usb; -; - -programmer - id = "avr910"; - desc = "Atmel Low Cost Serial Programmer"; - type = "avr910"; - connection_type = serial; -; - -programmer - id = "ft245r"; - desc = "FT245R Synchronous BitBang"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 1; # D1 - sck = 0; # D0 - mosi = 2; # D2 - reset = 4; # D4 -; - -programmer - id = "ft232r"; - desc = "FT232R Synchronous BitBang"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 1; # RxD - sck = 0; # RTS - mosi = 2; # TxD - reset = 4; # DTR -; - -# see http://www.bitwizard.nl/wiki/index.php/FTDI_ATmega -programmer - id = "bwmega"; - desc = "BitWizard ftdi_atmega builtin programmer"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 5; # DSR - sck = 6; # DCD - mosi = 3; # CTS - reset = 7; # RI -; - -# see http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html -# Note: pins are numbered from 1! -programmer - id = "arduino-ft232r"; - desc = "Arduino: FT232R connected to ISP"; - type = "ftdi_syncbb"; - connection_type = usb; - miso = 3; # CTS X3(1) - sck = 5; # DSR X3(2) - mosi = 6; # DCD X3(3) - reset = 7; # RI X3(4) -; - -# website mentioned above uses this id -programmer parent "arduino-ft232r" - id = "diecimila"; - desc = "alias for arduino-ft232r"; -; - -programmer - id = "usbasp"; - desc = "USBasp, http://www.fischl.de/usbasp/"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x05DC; # Obdev's free shared PID - usbvendor = "www.fischl.de"; - usbproduct = "USBasp"; - - # following variants are autodetected for id "usbasp" - - # original usbasp from fischl.de - # see above "usbasp" - - # old usbasp from fischl.de - #usbvid = 0x03EB; # ATMEL - #usbpid = 0xC7B4; # (unoffical) USBasp - #usbvendor = "www.fischl.de"; - #usbproduct = "USBasp"; - - # NIBObee (only if -P nibobee is given on command line) - # see below "nibobee" -; - -programmer - id = "nibobee"; - desc = "NIBObee"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x092F; # NIBObee PID - usbvendor = "www.nicai-systems.com"; - usbproduct = "NIBObee"; -; - -programmer - id = "usbasp-clone"; - desc = "Any usbasp clone with correct VID/PID"; - type = "usbasp"; - connection_type = usb; - usbvid = 0x16C0; # VOTI - usbpid = 0x05DC; # Obdev's free shared PID - #usbvendor = ""; - #usbproduct = ""; -; - -programmer - id = "usbtiny"; - desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; - type = "usbtiny"; - connection_type = usb; - usbvid = 0x1781; - usbpid = 0x0c9f; -; - -programmer - id = "arduinogemma"; - desc = "Arduino Gemma. Based on USBtiny"; - type = "usbtiny"; - connection_type = usb; - usbvid = 0x2341; - usbpid = 0x0c9f; -; - -programmer - id = "arduinoisp"; - desc = " "; - type = "usbtiny"; - connection_type = usb; - usbvid = 0x2341; - usbpid = 0x0049; -; - -programmer - id = "butterfly"; - desc = "Atmel Butterfly Development Board"; - type = "butterfly"; - connection_type = serial; -; - -programmer - id = "avr109"; - desc = "Atmel AppNote AVR109 Boot Loader"; - type = "butterfly"; - connection_type = serial; -; - -programmer - id = "avr911"; - desc = "Atmel AppNote AVR911 AVROSP"; - type = "butterfly"; - connection_type = serial; -; - -# suggested in http://forum.mikrokopter.de/topic-post48317.html -programmer - id = "mkbutterfly"; - desc = "Mikrokopter.de Butterfly"; - type = "butterfly_mk"; - connection_type = serial; -; - -programmer parent "mkbutterfly" - id = "butterfly_mk"; -; - -programmer - id = "jtagmkI"; - desc = "Atmel JTAG ICE (mkI)"; - baudrate = 115200; # default is 115200 - type = "jtagmki"; - connection_type = serial; -; - -# easier to type -programmer parent "jtagmkI" - id = "jtag1"; -; - -# easier to type -programmer parent "jtag1" - id = "jtag1slow"; - baudrate = 19200; -; - -# The JTAG ICE mkII has both, serial and USB connectivity. As it is -# mostly used through USB these days (AVR Studio 5 only supporting it -# that way), we make connection_type = usb the default. Users are -# still free to use a serial port with the -P option. - -programmer - id = "jtagmkII"; - desc = "Atmel JTAG ICE mkII"; - baudrate = 19200; # default is 19200 - type = "jtagmkii"; - connection_type = usb; -; - -# easier to type -programmer parent "jtagmkII" - id = "jtag2slow"; -; - -# JTAG ICE mkII @ 115200 Bd -programmer parent "jtag2slow" - id = "jtag2fast"; - baudrate = 115200; -; - -# make the fast one the default, people will love that -programmer parent "jtag2fast" - id = "jtag2"; -; - -# JTAG ICE mkII in ISP mode -programmer - id = "jtag2isp"; - desc = "Atmel JTAG ICE mkII in ISP mode"; - baudrate = 115200; - type = "jtagmkii_isp"; - connection_type = usb; -; - -# JTAG ICE mkII in debugWire mode -programmer - id = "jtag2dw"; - desc = "Atmel JTAG ICE mkII in debugWire mode"; - baudrate = 115200; - type = "jtagmkii_dw"; - connection_type = usb; -; - -# JTAG ICE mkII in AVR32 mode -programmer - id = "jtagmkII_avr32"; - desc = "Atmel JTAG ICE mkII im AVR32 mode"; - baudrate = 115200; - type = "jtagmkii_avr32"; - connection_type = usb; -; - -# JTAG ICE mkII in AVR32 mode -programmer - id = "jtag2avr32"; - desc = "Atmel JTAG ICE mkII im AVR32 mode"; - baudrate = 115200; - type = "jtagmkii_avr32"; - connection_type = usb; -; - -# JTAG ICE mkII in PDI mode -programmer - id = "jtag2pdi"; - desc = "Atmel JTAG ICE mkII PDI mode"; - baudrate = 115200; - type = "jtagmkii_pdi"; - connection_type = usb; -; - -# AVR Dragon in JTAG mode -programmer - id = "dragon_jtag"; - desc = "Atmel AVR Dragon in JTAG mode"; - baudrate = 115200; - type = "dragon_jtag"; - connection_type = usb; -; - -# AVR Dragon in ISP mode -programmer - id = "dragon_isp"; - desc = "Atmel AVR Dragon in ISP mode"; - baudrate = 115200; - type = "dragon_isp"; - connection_type = usb; -; - -# AVR Dragon in PP mode -programmer - id = "dragon_pp"; - desc = "Atmel AVR Dragon in PP mode"; - baudrate = 115200; - type = "dragon_pp"; - connection_type = usb; -; - -# AVR Dragon in HVSP mode -programmer - id = "dragon_hvsp"; - desc = "Atmel AVR Dragon in HVSP mode"; - baudrate = 115200; - type = "dragon_hvsp"; - connection_type = usb; -; - -# AVR Dragon in debugWire mode -programmer - id = "dragon_dw"; - desc = "Atmel AVR Dragon in debugWire mode"; - baudrate = 115200; - type = "dragon_dw"; - connection_type = usb; -; - -# AVR Dragon in PDI mode -programmer - id = "dragon_pdi"; - desc = "Atmel AVR Dragon in PDI mode"; - baudrate = 115200; - type = "dragon_pdi"; - connection_type = usb; -; - -programmer - id = "jtag3"; - desc = "Atmel AVR JTAGICE3 in JTAG mode"; - type = "jtagice3"; - connection_type = usb; -; - -programmer - id = "jtag3pdi"; - desc = "Atmel AVR JTAGICE3 in PDI mode"; - type = "jtagice3_pdi"; - connection_type = usb; -; - -programmer - id = "jtag3dw"; - desc = "Atmel AVR JTAGICE3 in debugWIRE mode"; - type = "jtagice3_dw"; - connection_type = usb; -; - -programmer - id = "jtag3isp"; - desc = "Atmel AVR JTAGICE3 in ISP mode"; - type = "jtagice3_isp"; - connection_type = usb; -; - - -programmer - id = "pavr"; - desc = "Jason Kyle's pAVR Serial Programmer"; - type = "avr910"; - connection_type = serial; -; - -programmer - id = "pickit2"; - desc = "MicroChip's PICkit2 Programmer"; - type = "pickit2"; - connection_type = usb; -; - -# Parallel port programmers. - -programmer - id = "bsd"; - desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; - type = "par"; - connection_type = parallel; - vcc = 2, 3, 4, 5; - reset = 7; - sck = 8; - mosi = 9; - miso = 10; -; - -programmer - id = "stk200"; - desc = "STK200"; - type = "par"; - connection_type = parallel; - buff = 4, 5; - sck = 6; - mosi = 7; - reset = 9; - miso = 10; -; - -# The programming dongle used by the popular Ponyprog -# utility. It is almost similar to the STK200 one, -# except that there is a LED indicating that the -# programming is currently in progress. - -programmer parent "stk200" - id = "pony-stk200"; - desc = "Pony Prog STK200"; - pgmled = 8; -; - -programmer - id = "dt006"; - desc = "Dontronics DT006"; - type = "par"; - connection_type = parallel; - reset = 4; - sck = 5; - mosi = 2; - miso = 11; -; - -programmer parent "dt006" - id = "bascom"; - desc = "Bascom SAMPLE programming cable"; -; - -programmer - id = "alf"; - desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; - type = "par"; - connection_type = parallel; - vcc = 2, 3, 4, 5; - buff = 6; - reset = 7; - sck = 8; - mosi = 9; - miso = 10; - errled = 1; - rdyled = 14; - pgmled = 16; - vfyled = 17; -; - -programmer - id = "sp12"; - desc = "Steve Bolt's Programmer"; - type = "par"; - connection_type = parallel; - vcc = 4,5,6,7,8; - reset = 3; - sck = 2; - mosi = 9; - miso = 11; -; - -programmer - id = "picoweb"; - desc = "Picoweb Programming Cable, http://www.picoweb.net/"; - type = "par"; - connection_type = parallel; - reset = 2; - sck = 3; - mosi = 4; - miso = 13; -; - -programmer - id = "abcmini"; - desc = "ABCmini Board, aka Dick Smith HOTCHIP"; - type = "par"; - connection_type = parallel; - reset = 4; - sck = 3; - mosi = 2; - miso = 10; -; - -programmer - id = "futurlec"; - desc = "Futurlec.com programming cable."; - type = "par"; - connection_type = parallel; - reset = 3; - sck = 2; - mosi = 1; - miso = 10; -; - - -# From the contributor of the "xil" jtag cable: -# The "vcc" definition isn't really vcc (the cable gets its power from -# the programming circuit) but is necessary to switch one of the -# buffer lines (trying to add it to the "buff" lines doesn't work in -# avrdude versions before 5.5j). -# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK -# to SCK (plus vcc/gnd of course) -programmer - id = "xil"; - desc = "Xilinx JTAG cable"; - type = "par"; - connection_type = parallel; - mosi = 2; - sck = 3; - reset = 4; - buff = 5; - miso = 13; - vcc = 6; -; - - -programmer - id = "dapa"; - desc = "Direct AVR Parallel Access cable"; - type = "par"; - connection_type = parallel; - vcc = 3; - reset = 16; - sck = 1; - mosi = 2; - miso = 11; -; - -programmer - id = "atisp"; - desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; - type = "par"; - connection_type = parallel; - reset = ~6; - sck = ~8; - mosi = ~7; - miso = ~10; -; - -programmer - id = "ere-isp-avr"; - desc = "ERE ISP-AVR "; - type = "par"; - connection_type = parallel; - reset = ~4; - sck = 3; - mosi = 2; - miso = 10; -; - -programmer - id = "blaster"; - desc = "Altera ByteBlaster"; - type = "par"; - connection_type = parallel; - sck = 2; - miso = 11; - reset = 3; - mosi = 8; - buff = 14; -; - -# It is almost same as pony-stk200, except vcc on pin 5 to auto -# disconnect port (download on http://electropol.free.fr/spip/spip.php?article27) -programmer parent "pony-stk200" - id = "frank-stk200"; - desc = "Frank STK200"; - buff = ; # delete buff pin assignment - vcc = 5; -; - -# The AT98ISP Cable is a simple parallel dongle for AT89 family. -# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 -programmer - id = "89isp"; - desc = "Atmel at89isp cable"; - type = "par"; - connection_type = parallel; - reset = 17; - sck = 1; - mosi = 2; - miso = 10; -; - - -#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface -# -#To enable it set the configuration below to match the GPIO lines connected to the -#relevant ISP header pins and uncomment the entry definition. In case you don't -#have the required permissions to edit this system wide config file put the -#entry in a separate .conf file and use it with -C+.conf -#on the command line. -# -#To check if your avrdude build has support for the linuxgpio programmer compiled in, -#use -c?type on the command line and look for linuxgpio in the list. If it's not available -#you need pass the --enable-linuxgpio=yes option to configure and recompile avrdude. -# -#programmer -# id = "linuxgpio"; -# desc = "Use the Linux sysfs interface to bitbang GPIO lines"; -# type = "linuxgpio"; -# reset = ?; -# sck = ?; -# mosi = ?; -# miso = ?; -#; - -#This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface and direct -#GPIO memory registers read/write. -# -#To enable it set the configuration below to match the GPIO lines connected to the -#relevant ISP header pins and uncomment the entry definition. In case you don't -#have the required permissions to edit this system wide config file put the -#entry in a separate .conf file and use it with -C+.conf -#on the command line. -# -#To check if your avrdude build has support for the arduinotre programmer compiled in, -#use -c?type on the command line and look for arduinotre in the list. If it's not available -#you need pass the --enable-arduinotre=yes option to configure and recompile avrdude. -# -#programmer -# id = "arduinotre"; -# desc = "Arduino TRE bitbanging using GPIO registers"; -# type = "arduinotre"; -# reset = ~65; -# sck = 49; -# mosi = 48; -# miso = 61; -#; - -# some ultra cheap programmers use bitbanging on the -# serialport. -# -# PC - DB9 - Pins for RS232: -# -# GND 5 -- |O -# | O| <- 9 RI -# DTR 4 <- |O | -# | O| <- 8 CTS -# TXD 3 <- |O | -# | O| -> 7 RTS -# RXD 2 -> |O | -# | O| <- 6 DSR -# DCD 1 -> |O -# -# Using RXD is currently not supported. -# Using RI is not supported under Win32 but is supported under Posix. - -# serial ponyprog design (dasa2 in uisp) -# reset=!txd sck=rts mosi=dtr miso=cts - -programmer - id = "ponyser"; - desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts"; - type = "serbb"; - connection_type = serial; - reset = ~3; - sck = 7; - mosi = 4; - miso = 8; -; - -# Same as above, different name -# reset=!txd sck=rts mosi=dtr miso=cts - -programmer parent "ponyser" - id = "siprog"; - desc = "Lancos SI-Prog "; -; - -# unknown (dasa in uisp) -# reset=rts sck=dtr mosi=txd miso=cts - -programmer - id = "dasa"; - desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts"; - type = "serbb"; - connection_type = serial; - reset = 7; - sck = 4; - mosi = 3; - miso = 8; -; - -# unknown (dasa3 in uisp) -# reset=!dtr sck=rts mosi=txd miso=cts - -programmer - id = "dasa3"; - desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts"; - type = "serbb"; - connection_type = serial; - reset = ~4; - sck = 7; - mosi = 3; - miso = 8; -; - -# C2N232i (jumper configuration "auto") -# reset=dtr sck=!rts mosi=!txd miso=!cts - -programmer - id = "c2n232i"; - desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts"; - type = "serbb"; - connection_type = serial; - reset = 4; - sck = ~7; - mosi = ~3; - miso = ~8; -; - -# -# PART DEFINITIONS -# - -#------------------------------------------------------------ -# ATtiny11 -#------------------------------------------------------------ - -# This is an HVSP-only device. - -part - id = "t11"; - desc = "ATtiny11"; - stk500_devcode = 0x11; - signature = 0x1e 0x90 0x04; - chip_erase_delay = 20000; - - timeout = 200; - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - blocksize = 64; - readsize = 256; - delay = 5; - ; - - memory "flash" - size = 1024; - blocksize = 128; - readsize = 256; - delay = 3; - ; - - memory "signature" - size = 3; - ; - - memory "lock" - size = 1; - ; - - memory "calibration" - size = 1; - ; - - memory "fuse" - size = 1; - ; -; - -#------------------------------------------------------------ -# ATtiny12 -#------------------------------------------------------------ - -part - id = "t12"; - desc = "ATtiny12"; - stk500_devcode = 0x12; - avr910_devcode = 0x55; - signature = 0x1e 0x90 0x05; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 8; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - size = 1024; - min_write_delay = 4500; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -; - -#------------------------------------------------------------ -# ATtiny13 -#------------------------------------------------------------ - -part - id = "t13"; - desc = "ATtiny13"; - has_debugwire = yes; - flash_instr = 0xB4, 0x0E, 0x1E; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x0E, 0xB4, 0x0E, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; - signature = 0x1e 0x90 0x07; - chip_erase_delay = 4000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 90; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 0; - - memory "eeprom" - size = 64; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 1024; - page_size = 32; - num_pages = 32; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 0 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny15 -#------------------------------------------------------------ - -part - id = "t15"; - desc = "ATtiny15"; - stk500_devcode = 0x13; - avr910_devcode = 0x56; - signature = 0x1e 0x90 0x06; - chip_erase_delay = 8200; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 5; - synchcycles = 6; - latchcycles = 16; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 64; - min_write_delay = 8200; - max_write_delay = 8200; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - size = 1024; - min_write_delay = 4100; - max_write_delay = 4100; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x o o o o x x o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x i i i i 1 1 i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -; - -#------------------------------------------------------------ -# AT90s1200 -#------------------------------------------------------------ - -part - id = "1200"; - desc = "AT90S1200"; - is_at90s1200 = yes; - stk500_devcode = 0x33; - avr910_devcode = 0x13; - signature = 0x1e 0x90 0x01; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 1; - bytedelay = 0; - pollindex = 0; - pollvalue = 0xFF; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 64; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x x a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 32; - readsize = 256; - ; - memory "flash" - size = 1024; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x02; - delay = 15; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s4414 -#------------------------------------------------------------ - -part - id = "4414"; - desc = "AT90S4414"; - stk500_devcode = 0x50; - avr910_devcode = 0x28; - signature = 0x1e 0x92 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s2313 -#------------------------------------------------------------ - -part - id = "2313"; - desc = "AT90S2313"; - stk500_devcode = 0x40; - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 128; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 2048; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x i i x", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s2333 -#------------------------------------------------------------ - -part - id = "2333"; -##### WARNING: No XML file for device 'AT90S2333'! ##### - desc = "AT90S2333"; - stk500_devcode = 0x42; - avr910_devcode = 0x34; - signature = 0x1e 0x91 0x05; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - size = 2048; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - pwroff_after_write = yes; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - - -#------------------------------------------------------------ -# AT90s2343 (also AT90s2323 and ATtiny22) -#------------------------------------------------------------ - -part - id = "2343"; - desc = "AT90S2343"; - stk500_devcode = 0x43; - avr910_devcode = 0x4c; - signature = 0x1e 0x91 0x03; - chip_erase_delay = 18000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x00, - 0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78, - 0x78, 0x00, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 0; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 50; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - memory "flash" - size = 2048; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 128; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o o x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o o x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - - -#------------------------------------------------------------ -# AT90s4433 -#------------------------------------------------------------ - -part - id = "4433"; - desc = "AT90S4433"; - stk500_devcode = 0x51; - avr910_devcode = 0x30; - signature = 0x1e 0x92 0x03; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - pwroff_after_write = yes; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s4434 -#------------------------------------------------------------ - -part - id = "4434"; -##### WARNING: No XML file for device 'AT90S4434'! ##### - desc = "AT90S4434"; - stk500_devcode = 0x52; - avr910_devcode = 0x6c; - signature = 0x1e 0x92 0x02; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - memory "eeprom" - size = 256; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - ; - memory "flash" - size = 4096; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 i i i i i", - "x x x x x x x x x x x x x x x x"; - ; - memory "lock" - size = 1; - min_write_delay = 9000; - max_write_delay = 20000; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - ; - ; - -#------------------------------------------------------------ -# AT90s8515 -#------------------------------------------------------------ - -part - id = "8515"; - desc = "AT90S8515"; - stk500_devcode = 0x60; - avr910_devcode = 0x38; - signature = 0x1e 0x93 0x01; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 512; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 8192; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x7f; - readback_p2 = 0x7f; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# AT90s8535 -#------------------------------------------------------------ - -part - id = "8535"; - desc = "AT90S8535"; - stk500_devcode = 0x61; - avr910_devcode = 0x68; - signature = 0x1e 0x93 0x03; - chip_erase_delay = 20000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 1; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0x00; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "flash" - size = 8192; - min_write_delay = 9000; - max_write_delay = 20000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write_lo = " 0 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - write_hi = " 0 1 0 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 128; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "fuse" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x x o"; - write = "1 0 1 0 1 1 0 0 1 0 1 1 1 1 1 i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x o o x x x x x x"; - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - ; - -#------------------------------------------------------------ -# ATmega103 -#------------------------------------------------------------ - -part - id = "m103"; - desc = "ATmega103"; - stk500_devcode = 0xB1; - avr910_devcode = 0x41; - signature = 0x1e 0x97 0x01; - chip_erase_delay = 112000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x8E, 0x9E, 0x2E, 0x3E, 0xAE, 0xBE, - 0x4E, 0x5E, 0xCE, 0xDE, 0x6E, 0x7E, 0xEE, 0xDE, - 0x66, 0x76, 0xE6, 0xF6, 0x6A, 0x7A, 0xEA, 0x7A, - 0x7F, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 15; - chiperasepolltimeout = 0; - programfusepulsewidth = 2; - programfusepolltimeout = 0; - programlockpulsewidth = 0; - programlockpolltimeout = 10; - - memory "eeprom" - size = 4096; - min_write_delay = 4000; - max_write_delay = 9000; - readback_p1 = 0x80; - readback_p2 = 0x7f; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 22000; - max_write_delay = 56000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x11; - delay = 70; - blocksize = 256; - readsize = 256; - ; - - memory "fuse" - size = 1; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x x o x o 1 o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 1 i 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x o o x"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 i i 1", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega64 -#------------------------------------------------------------ - -part - id = "m64"; - desc = "ATmega64"; - has_jtag = yes; - stk500_devcode = 0xA0; - avr910_devcode = 0x45; - signature = 0x1e 0x96 0x02; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x22; - spmcr = 0x68; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - - -#------------------------------------------------------------ -# ATmega128 -#------------------------------------------------------------ - -part - id = "m128"; - desc = "ATmega128"; - has_jtag = yes; - stk500_devcode = 0xB2; - avr910_devcode = 0x43; - signature = 0x1e 0x97 0x02; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x22; - spmcr = 0x68; - rampz = 0x3b; - allowfullpagebitstream = yes; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 12; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN128 -#------------------------------------------------------------ - -part - id = "c128"; - desc = "AT90CAN128"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x97 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN64 -#------------------------------------------------------------ - -part - id = "c64"; - desc = "AT90CAN64"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x96 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90CAN32 -#------------------------------------------------------------ - -part - id = "c32"; - desc = "AT90CAN32"; - has_jtag = yes; - stk500_devcode = 0xB3; -# avr910_devcode = 0x43; - signature = 0x1e 0x95 0x81; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - eecr = 0x3f; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 256; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega16 -#------------------------------------------------------------ - -part - id = "m16"; - desc = "ATmega16"; - has_jtag = yes; - stk500_devcode = 0x82; - avr910_devcode = 0x74; - signature = 0x1e 0x94 0x03; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 100; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x04; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "calibration" - size = 4; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega164P -#------------------------------------------------------------ - -# close to ATmega16 - -part parent "m16" - id = "m164p"; - desc = "ATmega164P"; - signature = 0x1e 0x94 0x0a; - - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - allowfullpagebitstream = no; - chip_erase_delay = 55000; - - ocdrev = 3; - ; - - -#------------------------------------------------------------ -# ATmega324P -#------------------------------------------------------------ - -# similar to ATmega164P - -part - id = "m324p"; - desc = "ATmega324P"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x95 0x08; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega324PA -#------------------------------------------------------------ - -# similar to ATmega324P - -part parent "m324p" - id = "m324pa"; - desc = "ATmega324PA"; - signature = 0x1e 0x95 0x11; - - ocdrev = 3; - ; - - -#------------------------------------------------------------ -# ATmega644 -#------------------------------------------------------------ - -# similar to ATmega164 - -part - id = "m644"; - desc = "ATmega644"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x96 0x09; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega644P -#------------------------------------------------------------ - -# similar to ATmega164p - -part parent "m644" - id = "m644p"; - desc = "ATmega644P"; - signature = 0x1e 0x96 0x0a; - - ocdrev = 3; - ; - - - -#------------------------------------------------------------ -# ATmega1284P -#------------------------------------------------------------ - -# similar to ATmega164p - -part - id = "m1284p"; - desc = "ATmega1284P"; - has_jtag = yes; - stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one - avr910_devcode = 0x74; - signature = 0x1e 0x97 0x05; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 55000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - - - -#------------------------------------------------------------ -# ATmega162 -#------------------------------------------------------------ - -part - id = "m162"; - desc = "ATmega162"; - has_jtag = yes; - stk500_devcode = 0x83; - avr910_devcode = 0x63; - signature = 0x1e 0x94 0x04; - chip_erase_delay = 9000; - pagel = 0xd7; - bs2 = 0xa0; - - idr = 0x04; - spmcr = 0x57; - allowfullpagebitstream = yes; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - ocdrev = 2; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - - ; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 16000; - max_write_delay = 16000; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - - read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; -; - - - -#------------------------------------------------------------ -# ATmega163 -#------------------------------------------------------------ - -part - id = "m163"; - desc = "ATmega163"; - stk500_devcode = 0x81; - avr910_devcode = 0x64; - signature = 0x1e 0x94 0x02; - chip_erase_delay = 32000; - pagel = 0xd7; - bs2 = 0xa0; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 30; - programfusepulsewidth = 0; - programfusepolltimeout = 2; - programlockpulsewidth = 0; - programlockpolltimeout = 2; - - - memory "eeprom" - size = 512; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 16000; - max_write_delay = 16000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x11; - delay = 20; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o x x o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i 1 1 i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x 1 o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x 1 1 1 1 1 i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x 0 x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega169 -#------------------------------------------------------------ - -part - id = "m169"; - desc = "ATmega169"; - has_jtag = yes; - stk500_devcode = 0x85; - avr910_devcode = 0x78; - signature = 0x1e 0x94 0x05; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega329 -#------------------------------------------------------------ - -part - id = "m329"; - desc = "ATmega329"; - has_jtag = yes; -# stk500_devcode = 0x85; # no STK500 support, only STK500v2 -# avr910_devcode = 0x?; # try the ATmega169 one: - avr910_devcode = 0x75; - signature = 0x1e 0x95 0x03; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega329P -#------------------------------------------------------------ -# Identical to ATmega329 except of the signature - -part parent "m329" - id = "m329p"; - desc = "ATmega329P"; - signature = 0x1e 0x95 0x0b; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega3290 -#------------------------------------------------------------ - -# identical to ATmega329 - -part parent "m329" - id = "m3290"; - desc = "ATmega3290"; - signature = 0x1e 0x95 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega3290P -#------------------------------------------------------------ - -# identical to ATmega3290 except of the signature - -part parent "m3290" - id = "m3290p"; - desc = "ATmega3290P"; - signature = 0x1e 0x95 0x0c; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega649 -#------------------------------------------------------------ - -part - id = "m649"; - desc = "ATmega649"; - has_jtag = yes; -# stk500_devcode = 0x85; # no STK500 support, only STK500v2 -# avr910_devcode = 0x?; # try the ATmega169 one: - avr910_devcode = 0x75; - signature = 0x1e 0x96 0x03; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega6490 -#------------------------------------------------------------ - -# identical to ATmega649 - -part parent "m649" - id = "m6490"; - desc = "ATmega6490"; - signature = 0x1e 0x96 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega32 -#------------------------------------------------------------ - -part - id = "m32"; - desc = "ATmega32"; - has_jtag = yes; - stk500_devcode = 0x91; - avr910_devcode = 0x72; - signature = 0x1e 0x95 0x02; - chip_erase_delay = 9000; - pagel = 0xd7; - bs2 = 0xa0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = yes; - - ocdrev = 2; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega161 -#------------------------------------------------------------ - -part - id = "m161"; - desc = "ATmega161"; - stk500_devcode = 0x80; - avr910_devcode = 0x60; - signature = 0x1e 0x94 0x01; - chip_erase_delay = 28000; - pagel = 0xd7; - bs2 = 0xa0; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 30; - programfusepulsewidth = 0; - programfusepolltimeout = 2; - programlockpulsewidth = 0; - programlockpolltimeout = 2; - - memory "eeprom" - size = 512; - min_write_delay = 3400; - max_write_delay = 3400; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 5; - blocksize = 128; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 14000; - max_write_delay = 14000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 16; - blocksize = 128; - readsize = 256; - ; - - memory "fuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 x x x x x x x x", - "x x x x x x x x x o x o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 x x x x x", - "x x x x x x x x 1 i 1 i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATmega8 -#------------------------------------------------------------ - -part - id = "m8"; - desc = "ATmega8"; - stk500_devcode = 0x70; - avr910_devcode = 0x76; - signature = 0x1e 0x93 0x07; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 10000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - page_size = 4; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - -#------------------------------------------------------------ -# ATmega8515 -#------------------------------------------------------------ - -part - id = "m8515"; - desc = "ATmega8515"; - stk500_devcode = 0x63; - avr910_devcode = 0x3A; - signature = 0x1e 0x93 0x06; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - - - -#------------------------------------------------------------ -# ATmega8535 -#------------------------------------------------------------ - -part - id = "m8535"; - desc = "ATmega8535"; - stk500_devcode = 0x64; - avr910_devcode = 0x69; - signature = 0x1e 0x93 0x08; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 6; - togglevtg = 0; - poweroffdelay = 0; - resetdelayms = 0; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - mode = 0x04; - delay = 20; - blocksize = 128; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 2000; - max_write_delay = 2000; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 0 0 x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - - -#------------------------------------------------------------ -# ATtiny26 -#------------------------------------------------------------ - -part - id = "t26"; - desc = "ATtiny26"; - stk500_devcode = 0x21; - avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x09; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - mode = 0x04; - delay = 10; - blocksize = 64; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 16; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x x x x i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 4; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny261 -#------------------------------------------------------------ -# Close to ATtiny26 - -part - id = "t261"; - desc = "ATtiny261"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x0c; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 128; - page_size = 4; - num_pages = 32; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = "1 0 1 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 x x x x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x x a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny461 -#------------------------------------------------------------ -# Close to ATtiny261 - -part - id = "t461"; - desc = "ATtiny461"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x92 0x08; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 256; - page_size = 4; - num_pages = 64; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATtiny861 -#------------------------------------------------------------ -# Close to ATtiny461 - -part - id = "t861"; - desc = "ATtiny861"; - has_debugwire = yes; - flash_instr = 0xB4, 0x00, 0x10; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x00, 0xB4, 0x00, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -# stk500_devcode = 0x21; -# avr910_devcode = 0x5e; - signature = 0x1e 0x93 0x0d; - pagel = 0xb3; - bs2 = 0xb2; - chip_erase_delay = 4000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 0; - - pp_controlstack = - 0xC4, 0xE4, 0xC4, 0xE4, 0xCC, 0xEC, 0xCC, 0xEC, - 0xD4, 0xF4, 0xD4, 0xF4, 0xDC, 0xFC, 0xDC, 0xFC, - 0xC8, 0xE8, 0xD8, 0xF8, 0x4C, 0x6C, 0x5C, 0x7C, - 0xEC, 0xBC, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 2; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - size = 512; - num_pages = 128; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4000; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read = " 1 0 1 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0 x x x x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 x x x x x x x x", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 1 1 1 i i", - "x x x x x x x x x x x x x x x x"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - -; - - -#------------------------------------------------------------ -# ATmega48 -#------------------------------------------------------------ - -part - id = "m48"; - desc = "ATmega48"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x59; -# avr910_devcode = 0x; - signature = 0x1e 0x92 0x05; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 45000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 256; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x x", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x x x o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega48P -#------------------------------------------------------------ - -part parent "m48" - id = "m48p"; - desc = "ATmega48P"; - signature = 0x1e 0x92 0x0a; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# ATmega88 -#------------------------------------------------------------ - -part - id = "m88"; - desc = "ATmega88"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x73; -# avr910_devcode = 0x; - signature = 0x1e 0x93 0x0a; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 512; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega88P -#------------------------------------------------------------ - -part parent "m88" - id = "m88p"; - desc = "ATmega88P"; - signature = 0x1e 0x93 0x0f; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# ATmega168 -#------------------------------------------------------------ - -part - id = "m168"; - desc = "ATmega168"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x94 0x06; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 512; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# ATmega168P -#------------------------------------------------------------ - -part parent "m168" - id = "m168p"; - desc = "ATmega168P"; - signature = 0x1e 0x94 0x0b; - - ocdrev = 1; -; - -#------------------------------------------------------------ -# ATtiny88 -#------------------------------------------------------------ - -part - id = "t88"; - desc = "ATtiny88"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x73; -# avr910_devcode = 0x; - signature = 0x1e 0x93 0x11; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 64; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 64; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega328 -#------------------------------------------------------------ - -part - id = "m328"; - desc = "ATmega328"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x95 0x14; - pagel = 0xd7; - bs2 = 0xc2; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; - page_size = 4; - size = 1024; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x x x o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -part parent "m328" - id = "m328p"; - desc = "ATmega328P"; - signature = 0x1e 0x95 0x0F; - - ocdrev = 1; -; - -#------------------------------------------------------------ -# ATtiny2313 -#------------------------------------------------------------ - -part - id = "t2313"; - desc = "ATtiny2313"; - has_debugwire = yes; - flash_instr = 0xB2, 0x0F, 0x1F; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x23; -## Use the ATtiny26 devcode: - avr910_devcode = 0x5e; - signature = 0x1e 0x91 0x0a; - pagel = 0xD4; - bs2 = 0xD6; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 0; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - -# The information in the data sheet of April/2004 is wrong, this works: - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - -# The information in the data sheet of April/2004 is wrong, this works: - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - -# The information in the data sheet of April/2004 is wrong, this works: - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; -# The Tiny2313 has calibration data for both 4 MHz and 8 MHz. -# The information in the data sheet of April/2004 is wrong, this works: - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny4313 -#------------------------------------------------------------ - -part - id = "t4313"; - desc = "ATtiny4313"; - has_debugwire = yes; - flash_instr = 0xB2, 0x0F, 0x1F; - eeprom_instr = 0xBB, 0xFE, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBA, 0x0F, 0xB2, 0x0F, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x23; -## Use the ATtiny26 devcode: - avr910_devcode = 0x5e; - signature = 0x1e 0x92 0x0d; - pagel = 0xD4; - bs2 = 0xD6; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 0; - - memory "eeprom" - size = 256; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny4313 has Signature Bytes: 0x1E 0x92 0x0D. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90PWM2 -#------------------------------------------------------------ - -part - id = "pwm2"; - desc = "AT90PWM2"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x65; -## avr910_devcode = ?; - signature = 0x1e 0x93 0x81; - pagel = 0xD8; - bs2 = 0xE2; - reset = io; - chip_erase_delay = 9000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; -# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90PWM3 -#------------------------------------------------------------ - -# Completely identical to AT90PWM2 (including the signature!) - -part parent "pwm2" - id = "pwm3"; - desc = "AT90PWM3"; - ; - -#------------------------------------------------------------ -# AT90PWM2B -#------------------------------------------------------------ -# Same as AT90PWM2 but different signature. - -part parent "pwm2" - id = "pwm2b"; - desc = "AT90PWM2B"; - signature = 0x1e 0x93 0x83; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# AT90PWM3B -#------------------------------------------------------------ - -# Completely identical to AT90PWM2B (including the signature!) - -part parent "pwm2b" - id = "pwm3b"; - desc = "AT90PWM3B"; - - ocdrev = 1; - ; - -#------------------------------------------------------------ -# AT90PWM316 -#------------------------------------------------------------ - -# Similar to AT90PWM3B, but with 16 kiB flash, 512 B EEPROM, and 1024 B SRAM. - -part parent "pwm3b" - id = "pwm316"; - desc = "AT90PWM316"; - signature = 0x1e 0x94 0x83; - - ocdrev = 1; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x21; - delay = 6; - blocksize = 128; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATtiny25 -#------------------------------------------------------------ - -part - id = "t25"; - desc = "ATtiny25"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x08; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny45 -#------------------------------------------------------------ - -part - id = "t45"; - desc = "ATtiny45"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x06; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 256; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!) - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny85 -#------------------------------------------------------------ - -part - id = "t85"; - desc = "ATtiny85"; - has_debugwire = yes; - flash_instr = 0xB4, 0x02, 0x12; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x02, 0xB4, 0x02, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x93 0x0b; - reset = io; - chip_erase_delay = 400000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 12; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 30000; - max_write_delay = 30000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega640 -#------------------------------------------------------------ -# Almost same as ATmega1280, except for different memory sizes - -part - id = "m640"; - desc = "ATmega640"; - signature = 0x1e 0x96 0x08; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega1280 -#------------------------------------------------------------ - -part - id = "m1280"; - desc = "ATmega1280"; - signature = 0x1e 0x97 0x03; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega1281 -#------------------------------------------------------------ -# Identical to ATmega1280 - -part parent "m1280" - id = "m1281"; - desc = "ATmega1281"; - signature = 0x1e 0x97 0x04; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega2560 -#------------------------------------------------------------ - -part - id = "m2560"; - desc = "ATmega2560"; - signature = 0x1e 0x98 0x01; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 4; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 262144; - page_size = 256; - num_pages = 1024; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - load_ext_addr = " 0 1 0 0 1 1 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 a16", - " 0 0 0 0 0 0 0 0"; - - mode = 0x41; - delay = 10; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega2561 -#------------------------------------------------------------ - -part parent "m2560" - id = "m2561"; - desc = "ATmega2561"; - signature = 0x1e 0x98 0x02; - - ocdrev = 4; - ; - -#------------------------------------------------------------ -# ATmega128RFA1 -#------------------------------------------------------------ -# Identical to ATmega2561 but half the ROM - -part parent "m2561" - id = "m128rfa1"; - desc = "ATmega128RFA1"; - signature = 0x1e 0xa7 0x01; - chip_erase_delay = 55000; - bs2 = 0xE2; - - ocdrev = 3; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 50000; - max_write_delay = 50000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 256; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATmega256RFR2 -#------------------------------------------------------------ - -part parent "m2561" - id = "m256rfr2"; - desc = "ATmega256RFR2"; - signature = 0x1e 0xa8 0x02; - chip_erase_delay = 55000; - bs2 = 0xE2; - - - ocdrev = 4; - ; - -#------------------------------------------------------------ -# ATmega128RFR2 -#------------------------------------------------------------ - -part parent "m128rfa1" - id = "m128rfr2"; - desc = "ATmega128RFR2"; - signature = 0x1e 0xa7 0x02; - - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega64RFR2 -#------------------------------------------------------------ - -part parent "m128rfa1" - id = "m64rfr2"; - desc = "ATmega64RFR2"; - signature = 0x1e 0xa6 0x02; - - - ocdrev = 3; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 50000; - max_write_delay = 50000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 256; - readsize = 256; - ; - ; - -#------------------------------------------------------------ -# ATmega2564RFR2 -#------------------------------------------------------------ - -part parent "m256rfr2" - id = "m2564rfr2"; - desc = "ATmega2564RFR2"; - signature = 0x1e 0xa8 0x03; - ; - -#------------------------------------------------------------ -# ATmega1284RFR2 -#------------------------------------------------------------ - -part parent "m128rfr2" - id = "m1284rfr2"; - desc = "ATmega1284RFR2"; - signature = 0x1e 0xa7 0x03; - ; - -#------------------------------------------------------------ -# ATmega644RFR2 -#------------------------------------------------------------ - -part parent "m64rfr2" - id = "m644rfr2"; - desc = "ATmega644RFR2"; - signature = 0x1e 0xa6 0x03; - ; - -#------------------------------------------------------------ -# ATtiny24 -#------------------------------------------------------------ - -part - id = "t24"; - desc = "ATtiny24"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x91 0x0b; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 128; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 2048; - page_size = 32; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x x a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny44 -#------------------------------------------------------------ - -part - id = "t44"; - desc = "ATtiny44"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x07; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 256; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny84 -#------------------------------------------------------------ - -part - id = "t84"; - desc = "ATtiny84"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; -## no STK500 devcode in XML file, use the ATtiny45 one - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x93 0x0c; - reset = io; - chip_erase_delay = 4500; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - hvsp_controlstack = - 0x4C, 0x0C, 0x1C, 0x2C, 0x3C, 0x64, 0x74, 0x66, - 0x68, 0x78, 0x68, 0x68, 0x7A, 0x6A, 0x68, 0x78, - 0x78, 0x7D, 0x6D, 0x0C, 0x80, 0x40, 0x20, 0x10, - 0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0F; - hventerstabdelay = 100; - hvspcmdexedelay = 0; - synchcycles = 6; - latchcycles = 1; - togglevtg = 1; - poweroffdelay = 25; - resetdelayms = 0; - resetdelayus = 70; - hvleavestabdelay = 100; - resetdelay = 25; - chiperasepolltimeout = 40; - chiperasetime = 0; - programfusepolltimeout = 25; - programlockpolltimeout = 25; - - ocdrev = 1; - - memory "eeprom" - size = 512; - paged = no; - page_size = 4; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x a8", - "a7 a6 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " x a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 32; - readsize = 256; - ; -# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C. - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x x x x x x x i i"; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATtiny43U -#------------------------------------------------------------ - -part - id = "t43u"; - desc = "ATtiny43u"; - has_debugwire = yes; - flash_instr = 0xB4, 0x07, 0x17; - eeprom_instr = 0xBB, 0xFF, 0xBB, 0xEE, 0xBB, 0xCC, 0xB2, 0x0D, - 0xBC, 0x07, 0xB4, 0x07, 0xBA, 0x0D, 0xBB, 0xBC, - 0x99, 0xE1, 0xBB, 0xAC; - stk500_devcode = 0x14; -## avr910_devcode = ?; -## Try the AT90S2313 devcode: - avr910_devcode = 0x20; - signature = 0x1e 0x92 0x0C; - reset = io; - chip_erase_delay = 1000; - - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, 0x4E, 0x5E, - 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, 0x06, 0x16, 0x46, 0x56, - 0x0A, 0x1A, 0x4A, 0x5A, 0x1E, 0x7C, 0x00, 0x01, 0x00, 0x00, - 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - hvspcmdexedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 20; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - memory "eeprom" - size = 64; - paged = yes; - page_size = 4; - num_pages = 16; - min_write_delay = 4000; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = "1 0 1 0 0 0 0 0 0 0 0 x x x x x", - "0 0 a4 a3 a2 a1 a0 o o o o o o o o"; - - write = "1 1 0 0 0 0 0 0 0 0 0 x x x x x", - "0 0 a5 a4 a3 a2 a1 a0 i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x x", - " 0 0 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - memory "flash" - paged = yes; - size = 4096; - page_size = 64; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x x a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 64; - readsize = 256; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - memory "lock" - size = 1; - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x x x x i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 4500; - max_write_delay = 4500; - ; - - memory "calibration" - size = 2; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# ATmega32u4 -#------------------------------------------------------------ - -part - id = "m32u4"; - desc = "ATmega32U4"; - signature = 0x1e 0x95 0x87; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB646 -#------------------------------------------------------------ - -part - id = "usb646"; - desc = "AT90USB646"; - signature = 0x1e 0x96 0x82; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x x a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB647 -#------------------------------------------------------------ -# identical to AT90USB646 - -part parent "usb646" - id = "usb647"; - desc = "AT90USB647"; - signature = 0x1e 0x96 0x82; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AT90USB1286 -#------------------------------------------------------------ - -part - id = "usb1286"; - desc = "AT90USB1286"; - signature = 0x1e 0x97 0x82; - has_jtag = yes; -# stk500_devcode = 0xB2; -# avr910_devcode = 0x43; - chip_erase_delay = 9000; - pagel = 0xD7; - bs2 = 0xA0; - reset = dedicated; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - rampz = 0x3b; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 4096; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " x x x x a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 131072; - page_size = 256; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 x x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 256; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x x i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 x x x x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 x x x x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB1287 -#------------------------------------------------------------ -# identical to AT90USB1286 - -part parent "usb1286" - id = "usb1287"; - desc = "AT90USB1287"; - signature = 0x1e 0x97 0x82; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AT90USB162 -#------------------------------------------------------------ - -part - id = "usb162"; - desc = "AT90USB162"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x94 0x82; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# AT90USB82 -#------------------------------------------------------------ -# Changes against AT90USB162 (beside IDs) -# memory "flash" -# size = 8192; -# num_pages = 64; - -part - id = "usb82"; - desc = "AT90USB82"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x93 0x82; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 128; - num_pages = 64; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega32U2 -#------------------------------------------------------------ -# Changes against AT90USB162 (beside IDs) -# memory "flash" -# size = 32768; -# num_pages = 256; -# memory "eeprom" -# size = 1024; -# num_pages = 256; -part - id = "m32u2"; - desc = "ATmega32U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x95 0x8a; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - num_pages = 256; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; -#------------------------------------------------------------ -# ATmega16U2 -#------------------------------------------------------------ -# Changes against ATmega32U2 (beside IDs) -# memory "flash" -# size = 16384; -# num_pages = 128; -# memory "eeprom" -# size = 512; -# num_pages = 128; -part - id = "m16u2"; - desc = "ATmega16U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x94 0x89; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 128; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega8U2 -#------------------------------------------------------------ -# Changes against ATmega16U2 (beside IDs) -# memory "flash" -# size = 8192; -# page_size = 64; -# blocksize = 64; - -part - id = "m8u2"; - desc = "ATmega8U2"; - has_jtag = no; - has_debugwire = yes; - signature = 0x1e 0x93 0x89; - chip_erase_delay = 9000; - reset = io; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - pagel = 0xD7; - bs2 = 0xC6; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - ocdrev = 1; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 512; - num_pages = 128; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0x00; - readback_p2 = 0x00; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 20; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 8192; - page_size = 64; - num_pages = 128; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0x00; - readback_p2 = 0x00; - read_lo = " 0 0 1 0 0 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " x x x x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - "a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 64; - readsize = 256; - ; - - memory "lfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x i i i i i i i i"; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; - ; -#------------------------------------------------------------ -# ATmega325 -#------------------------------------------------------------ - -part - id = "m325"; - desc = "ATmega325"; - signature = 0x1e 0x95 0x05; - has_jtag = yes; -# stk500_devcode = 0x??; # No STK500v1 support? -# avr910_devcode = 0x??; # Try the ATmega16 one - avr910_devcode = 0x74; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 4; /* for parallel programming */ - size = 1024; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 0 0 a9 a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 32768; - page_size = 128; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega645 -#------------------------------------------------------------ - -part - id = "m645"; - desc = "ATmega645"; - signature = 0x1E 0x96 0x05; - has_jtag = yes; -# stk500_devcode = 0x??; # No STK500v1 support? -# avr910_devcode = 0x??; # Try the ATmega16 one - avr910_devcode = 0x74; - pagel = 0xd7; - bs2 = 0xa0; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0F, 0x1F, 0x2E, 0x3E, 0x2F, 0x3F, - 0x4E, 0x5E, 0x4F, 0x5F, 0x6E, 0x7E, 0x6F, 0x7F, - 0x66, 0x76, 0x67, 0x77, 0x6A, 0x7A, 0x6B, 0x7B, - 0xBE, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 5; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - idr = 0x31; - spmcr = 0x57; - allowfullpagebitstream = no; - - ocdrev = 3; - - memory "eeprom" - paged = no; /* leave this "no" */ - page_size = 8; /* for parallel programming */ - size = 2048; - min_write_delay = 9000; - max_write_delay = 9000; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 0 0 0 a10 a9 a8", - " a7 a6 a5 a4 a3 0 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 10; - blocksize = 8; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 65536; - page_size = 256; - num_pages = 256; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 0 0 0 0 0", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " a15 a14 a13 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " 0 0 0 0 0 0 0 0"; - - mode = 0x41; - delay = 10; - blocksize = 128; - readsize = 256; - ; - - memory "lock" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 1 1 i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "lfuse" - size = 1; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "hfuse" - size = 1; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "0 0 0 0 0 0 0 0 i i i i i i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "efuse" - size = 1; - - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "0 0 0 0 0 0 0 0 1 1 1 1 1 i i i"; - min_write_delay = 9000; - max_write_delay = 9000; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 a1 a0 o o o o o o o o"; - ; - - memory "calibration" - size = 1; - - read = "0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - ; - -#------------------------------------------------------------ -# ATmega3250 -#------------------------------------------------------------ - -part parent "m325" - id = "m3250"; - desc = "ATmega3250"; - signature = 0x1E 0x95 0x06; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# ATmega6450 -#------------------------------------------------------------ - -part parent "m645" - id = "m6450"; - desc = "ATmega6450"; - signature = 0x1E 0x96 0x06; - - ocdrev = 3; - ; - -#------------------------------------------------------------ -# AVR XMEGA family common values -#------------------------------------------------------------ - -part - id = ".xmega"; - desc = "AVR XMEGA family common values"; - has_pdi = yes; - nvm_base = 0x01c0; - mcu_base = 0x0090; - - memory "signature" - size = 3; - offset = 0x1000090; - ; - - memory "prodsig" - size = 0x32; - offset = 0x8e0200; - page_size = 0x32; - readsize = 0x32; - ; - - memory "fuse1" - size = 1; - offset = 0x8f0021; - ; - - memory "fuse2" - size = 1; - offset = 0x8f0022; - ; - - memory "fuse4" - size = 1; - offset = 0x8f0024; - ; - - memory "fuse5" - size = 1; - offset = 0x8f0025; - ; - - memory "lock" - size = 1; - offset = 0x8f0027; - ; - - memory "data" - # SRAM, only used to supply the offset - offset = 0x1000000; - ; -; - -#------------------------------------------------------------ -# ATxmega16A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x16a4u"; - desc = "ATxmega16A4U"; - signature = 0x1e 0x94 0x41; - - memory "eeprom" - size = 0x400; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x4000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x803000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x804000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x5000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega16C4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16c4"; - desc = "ATxmega16C4"; - signature = 0x1e 0x95 0x44; -; - -#------------------------------------------------------------ -# ATxmega16D4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16d4"; - desc = "ATxmega16D4"; - signature = 0x1e 0x94 0x42; -; - -#------------------------------------------------------------ -# ATxmega16A4 -#------------------------------------------------------------ - -part parent "x16a4u" - id = "x16a4"; - desc = "ATxmega16A4"; - signature = 0x1e 0x94 0x41; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega32A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x32a4u"; - desc = "ATxmega32A4U"; - signature = 0x1e 0x95 0x41; - - memory "eeprom" - size = 0x400; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x8000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x807000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x808000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x9000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega32C4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32c4"; - desc = "ATxmega32C4"; - signature = 0x1e 0x94 0x43; -; - -#------------------------------------------------------------ -# ATxmega32D4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32d4"; - desc = "ATxmega32D4"; - signature = 0x1e 0x95 0x42; -; - -#------------------------------------------------------------ -# ATxmega32A4 -#------------------------------------------------------------ - -part parent "x32a4u" - id = "x32a4"; - desc = "ATxmega32A4"; - signature = 0x1e 0x95 0x41; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega64A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x64a4u"; - desc = "ATxmega64A4U"; - signature = 0x1e 0x96 0x46; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x10000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x80f000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x810000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x11000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega64C3 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64c3"; - desc = "ATxmega64C3"; - signature = 0x1e 0x96 0x49; -; - -#------------------------------------------------------------ -# ATxmega64D3 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64d3"; - desc = "ATxmega64D3"; - signature = 0x1e 0x96 0x4a; -; - -#------------------------------------------------------------ -# ATxmega64D4 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64d4"; - desc = "ATxmega64D4"; - signature = 0x1e 0x96 0x47; -; - -#------------------------------------------------------------ -# ATxmega64A1 -#------------------------------------------------------------ - -part parent "x64a4u" - id = "x64a1"; - desc = "ATxmega64A1"; - signature = 0x1e 0x96 0x4e; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega64A1U -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a1u"; - desc = "ATxmega64A1U"; - signature = 0x1e 0x96 0x4e; -; - -#------------------------------------------------------------ -# ATxmega64A3 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a3"; - desc = "ATxmega64A3"; - signature = 0x1e 0x96 0x42; -; - -#------------------------------------------------------------ -# ATxmega64A3U -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a3u"; - desc = "ATxmega64A3U"; - signature = 0x1e 0x96 0x42; -; - -#------------------------------------------------------------ -# ATxmega64A4 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64a4"; - desc = "ATxmega64A4"; - signature = 0x1e 0x96 0x46; -; - -#------------------------------------------------------------ -# ATxmega64B1 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64b1"; - desc = "ATxmega64B1"; - signature = 0x1e 0x96 0x52; -; - -#------------------------------------------------------------ -# ATxmega64B3 -#------------------------------------------------------------ - -part parent "x64a1" - id = "x64b3"; - desc = "ATxmega64B3"; - signature = 0x1e 0x96 0x51; -; - -#------------------------------------------------------------ -# ATxmega128C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128c3"; - desc = "ATxmega128C3"; - signature = 0x1e 0x97 0x52; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x81e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega128D3 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128d3"; - desc = "ATxmega128D3"; - signature = 0x1e 0x97 0x48; -; - -#------------------------------------------------------------ -# ATxmega128D4 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128d4"; - desc = "ATxmega128D4"; - signature = 0x1e 0x97 0x47; -; - -#------------------------------------------------------------ -# ATxmega128A1 -#------------------------------------------------------------ - -part parent "x128c3" - id = "x128a1"; - desc = "ATxmega128A1"; - signature = 0x1e 0x97 0x4c; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128A1 revision D -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a1d"; - desc = "ATxmega128A1revD"; - signature = 0x1e 0x97 0x41; -; - -#------------------------------------------------------------ -# ATxmega128A1U -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a1u"; - desc = "ATxmega128A1U"; - signature = 0x1e 0x97 0x4c; -; - -#------------------------------------------------------------ -# ATxmega128A3 -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a3"; - desc = "ATxmega128A3"; - signature = 0x1e 0x97 0x42; -; - -#------------------------------------------------------------ -# ATxmega128A3U -#------------------------------------------------------------ - -part parent "x128a1" - id = "x128a3u"; - desc = "ATxmega128A3U"; - signature = 0x1e 0x97 0x42; -; - -#------------------------------------------------------------ -# ATxmega128A4 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128a4"; - desc = "ATxmega128A4"; - signature = 0x1e 0x97 0x46; - has_jtag = yes; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x81f000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128A4U -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128a4u"; - desc = "ATxmega128A4U"; - signature = 0x1e 0x97 0x46; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x81f000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega128B1 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x128b1"; - desc = "ATxmega128B1"; - signature = 0x1e 0x97 0x4d; - has_jtag = yes; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x20000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x81e000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x820000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "flash" - size = 0x22000; - offset = 0x800000; - page_size = 0x100; - readsize = 0x100; - ; - - memory "usersig" - size = 0x100; - offset = 0x8e0400; - page_size = 0x100; - readsize = 0x100; - ; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega128B3 -#------------------------------------------------------------ - -part parent "x128b1" - id = "x128b3"; - desc = "ATxmega128B3"; - signature = 0x1e 0x97 0x4b; -; - -#------------------------------------------------------------ -# ATxmega192C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x192c3"; - desc = "ATxmega192C3"; - signature = 0x1e 0x97 0x51; - - memory "eeprom" - size = 0x800; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x30000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x82e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x830000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x32000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega192D3 -#------------------------------------------------------------ - -part parent "x192c3" - id = "x192d3"; - desc = "ATxmega192D3"; - signature = 0x1e 0x97 0x49; -; - -#------------------------------------------------------------ -# ATxmega192A1 -#------------------------------------------------------------ - -part parent "x192c3" - id = "x192a1"; - desc = "ATxmega192A1"; - signature = 0x1e 0x97 0x4e; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega192A3 -#------------------------------------------------------------ - -part parent "x192a1" - id = "x192a3"; - desc = "ATxmega192A3"; - signature = 0x1e 0x97 0x44; -; - -#------------------------------------------------------------ -# ATxmega192A3U -#------------------------------------------------------------ - -part parent "x192a1" - id = "x192a3u"; - desc = "ATxmega192A3U"; - signature = 0x1e 0x97 0x44; -; - -#------------------------------------------------------------ -# ATxmega256C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x256c3"; - desc = "ATxmega256C3"; - signature = 0x1e 0x98 0x46; - - memory "eeprom" - size = 0x1000; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x40000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x83e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x840000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x42000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega256D3 -#------------------------------------------------------------ - -part parent "x256c3" - id = "x256d3"; - desc = "ATxmega256D3"; - signature = 0x1e 0x98 0x44; -; - -#------------------------------------------------------------ -# ATxmega256A1 -#------------------------------------------------------------ - -part parent "x256c3" - id = "x256a1"; - desc = "ATxmega256A1"; - signature = 0x1e 0x98 0x46; - has_jtag = yes; - - memory "fuse0" - size = 1; - offset = 0x8f0020; - ; -; - -#------------------------------------------------------------ -# ATxmega256A3 -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3"; - desc = "ATxmega256A3"; - signature = 0x1e 0x98 0x42; -; - -#------------------------------------------------------------ -# ATxmega256A3U -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3u"; - desc = "ATxmega256A3U"; - signature = 0x1e 0x98 0x42; -; - -#------------------------------------------------------------ -# ATxmega256A3B -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3b"; - desc = "ATxmega256A3B"; - signature = 0x1e 0x98 0x43; -; - -#------------------------------------------------------------ -# ATxmega256A3BU -#------------------------------------------------------------ - -part parent "x256a1" - id = "x256a3bu"; - desc = "ATxmega256A3BU"; - signature = 0x1e 0x98 0x43; -; - -#------------------------------------------------------------ -# ATxmega384C3 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x384c3"; - desc = "ATxmega384C3"; - signature = 0x1e 0x98 0x45; - - memory "eeprom" - size = 0x1000; - offset = 0x8c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x60000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "apptable" - size = 0x2000; - offset = 0x85e000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "boot" - size = 0x2000; - offset = 0x860000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "flash" - size = 0x62000; - offset = 0x800000; - page_size = 0x200; - readsize = 0x100; - ; - - memory "usersig" - size = 0x200; - offset = 0x8e0400; - page_size = 0x200; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega384D3 -#------------------------------------------------------------ - -part parent "x384c3" - id = "x384d3"; - desc = "ATxmega384D3"; - signature = 0x1e 0x98 0x47; -; - -#------------------------------------------------------------ -# ATxmega8E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x8e5"; - desc = "ATxmega8E5"; - signature = 0x1e 0x93 0x41; - - memory "eeprom" - size = 0x0200; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x2000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x800; - offset = 0x00801800; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x800; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x2800; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega16E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x16e5"; - desc = "ATxmega16E5"; - signature = 0x1e 0x94 0x45; - - memory "eeprom" - size = 0x0200; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x4000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x00803000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x5000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# ATxmega32E5 -#------------------------------------------------------------ - -part parent ".xmega" - id = "x32e5"; - desc = "ATxmega32E5"; - signature = 0x1e 0x95 0x4c; - - memory "eeprom" - size = 0x0400; - offset = 0x08c0000; - page_size = 0x20; - readsize = 0x100; - ; - - memory "application" - size = 0x8000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "apptable" - size = 0x1000; - offset = 0x00807000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "boot" - size = 0x1000; - offset = 0x00804000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "flash" - size = 0x9000; - offset = 0x0800000; - page_size = 0x80; - readsize = 0x100; - ; - - memory "usersig" - size = 0x80; - offset = 0x8e0400; - page_size = 0x80; - readsize = 0x100; - ; -; - -#------------------------------------------------------------ -# AVR32UC3A0512 -#------------------------------------------------------------ - -part - id = "uc3a0512"; - desc = "AT32UC3A0512"; - signature = 0xED 0xC0 0x3F; - has_jtag = yes; - is_avr32 = yes; - - memory "flash" - paged = yes; - page_size = 512; # bytes - readsize = 512; # bytes - num_pages = 1024; # could be set dynamicly - size = 0x00080000; # could be set dynamicly - offset = 0x80000000; - ; -; - -part parent "uc3a0512" - id = "ucr2"; - desc = "deprecated, use 'uc3a0512'"; -; - -#------------------------------------------------------------ -# ATtiny1634. -#------------------------------------------------------------ - -part - id = "t1634"; - desc = "ATtiny1634"; - has_debugwire = yes; - flash_instr = 0xB6, 0x01, 0x11; - eeprom_instr = 0xBD, 0xF2, 0xBD, 0xE1, 0xBB, 0xCF, 0xB4, 0x00, - 0xBE, 0x01, 0xB6, 0x01, 0xBC, 0x00, 0xBB, 0xBF, - 0x99, 0xF9, 0xBB, 0xAF; - stk500_devcode = 0x86; - # avr910_devcode = 0x; - signature = 0x1e 0x94 0x12; - pagel = 0xB3; - bs2 = 0xB1; - reset = io; - chip_erase_delay = 9000; - pgm_enable = "1 0 1 0 1 1 0 0 0 1 0 1 0 0 1 1", - "x x x x x x x x x x x x x x x x"; - - chip_erase = "1 0 1 0 1 1 0 0 1 0 0 x x x x x", - "x x x x x x x x x x x x x x x x"; - - timeout = 200; - stabdelay = 100; - cmdexedelay = 25; - synchloops = 32; - bytedelay = 0; - pollindex = 3; - pollvalue = 0x53; - predelay = 1; - postdelay = 1; - pollmethod = 1; - - pp_controlstack = - 0x0E, 0x1E, 0x0E, 0x1E, 0x2E, 0x3E, 0x2E, 0x3E, - 0x4E, 0x5E, 0x4E, 0x5E, 0x6E, 0x7E, 0x6E, 0x7E, - 0x26, 0x36, 0x66, 0x76, 0x2A, 0x3A, 0x6A, 0x7A, - 0x2E, 0xFD, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - hventerstabdelay = 100; - progmodedelay = 0; - latchcycles = 0; - togglevtg = 1; - poweroffdelay = 15; - resetdelayms = 1; - resetdelayus = 0; - hvleavestabdelay = 15; - resetdelay = 15; - chiperasepulsewidth = 0; - chiperasepolltimeout = 10; - programfusepulsewidth = 0; - programfusepolltimeout = 5; - programlockpulsewidth = 0; - programlockpolltimeout = 5; - - memory "eeprom" - paged = no; - page_size = 4; - size = 256; - min_write_delay = 3600; - max_write_delay = 3600; - readback_p1 = 0xff; - readback_p2 = 0xff; - read = " 1 0 1 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - write = " 1 1 0 0 0 0 0 0", - " 0 0 0 x x x x a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_lo = " 1 1 0 0 0 0 0 1", - " 0 0 0 0 0 0 0 0", - " 0 0 0 0 0 0 a1 a0", - " i i i i i i i i"; - - writepage = " 1 1 0 0 0 0 1 0", - " 0 0 x x x x x a8", - " a7 a6 a5 a4 a3 a2 0 0", - " x x x x x x x x"; - - mode = 0x41; - delay = 5; - blocksize = 4; - readsize = 256; - ; - - memory "flash" - paged = yes; - size = 16384; - page_size = 32; - num_pages = 512; - min_write_delay = 4500; - max_write_delay = 4500; - readback_p1 = 0xff; - readback_p2 = 0xff; - read_lo = " 0 0 1 0 0 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - read_hi = " 0 0 1 0 1 0 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 a5 a4 a3 a2 a1 a0", - " o o o o o o o o"; - - loadpage_lo = " 0 1 0 0 0 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - loadpage_hi = " 0 1 0 0 1 0 0 0", - " 0 0 0 x x x x x", - " x x a5 a4 a3 a2 a1 a0", - " i i i i i i i i"; - - writepage = " 0 1 0 0 1 1 0 0", - " 0 0 0 a12 a11 a10 a9 a8", - " a7 a6 x x x x x x", - " x x x x x x x x"; - - mode = 0x41; - delay = 6; - blocksize = 128; - readsize = 256; - - ; - - memory "lfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "hfuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x o o o o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 1 0 0 0", - "x x x x x x x x i i i i i i i i"; - ; - - memory "efuse" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0", - "x x x x x x x x x x x o o o o o"; - - write = "1 0 1 0 1 1 0 0 1 0 1 0 0 1 0 0", - "x x x x x x x x x x x i i i i i"; - ; - - memory "lock" - size = 1; - min_write_delay = 4500; - max_write_delay = 4500; - read = "0 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0", - "x x x x x x x x x x x x x x o o"; - - write = "1 0 1 0 1 1 0 0 1 1 1 x x x x x", - "x x x x x x x x 1 1 1 1 1 1 i i"; - ; - - memory "calibration" - size = 1; - read = "0 0 1 1 1 0 0 0 0 0 0 x x x x x", - "0 0 0 0 0 0 0 0 o o o o o o o o"; - ; - - memory "signature" - size = 3; - read = "0 0 1 1 0 0 0 0 0 0 0 x x x x x", - "x x x x x x a1 a0 o o o o o o o o"; - ; -; - -#------------------------------------------------------------ -# Common values for reduced core tinys (4/5/9/10/20/40) -#------------------------------------------------------------ - -part - id = ".reduced_core_tiny"; - desc = "Common values for reduced core tinys"; - has_tpi = yes; - - memory "signature" - size = 3; - offset = 0x3fc0; - page_size = 16; - ; - - memory "fuse" - size = 1; - offset = 0x3f40; - page_size = 16; - blocksize = 4; - ; - - memory "calibration" - size = 1; - offset = 0x3f80; - page_size = 16; - ; - - memory "lockbits" - size = 1; - offset = 0x3f00; - page_size = 16; - ; -; - -#------------------------------------------------------------ -# ATtiny4 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t4"; - desc = "ATtiny4"; - signature = 0x1e 0x8f 0x0a; - - memory "flash" - size = 512; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny5 -#------------------------------------------------------------ - -part parent "t4" - id = "t5"; - desc = "ATtiny5"; - signature = 0x1e 0x8f 0x09; -; - -#------------------------------------------------------------ -# ATtiny9 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t9"; - desc = "ATtiny9"; - signature = 0x1e 0x90 0x08; - - memory "flash" - size = 1024; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny10 -#------------------------------------------------------------ - -part parent "t9" - id = "t10"; - desc = "ATtiny10"; - signature = 0x1e 0x90 0x03; -; - -#------------------------------------------------------------ -# ATtiny20 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t20"; - desc = "ATtiny20"; - signature = 0x1e 0x91 0x0F; - - memory "flash" - size = 2048; - offset = 0x4000; - page_size = 16; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATtiny40 -#------------------------------------------------------------ - -part parent ".reduced_core_tiny" - id = "t40"; - desc = "ATtiny40"; - signature = 0x1e 0x92 0x0E; - - memory "flash" - size = 4096; - offset = 0x4000; - page_size = 64; - blocksize = 128; - ; -; - -#------------------------------------------------------------ -# ATmega406 -#------------------------------------------------------------ - -part - id = "m406"; - desc = "ATMEGA406"; - has_jtag = yes; - signature = 0x1e 0x95 0x07; - - # STK500 parameters (parallel programming IO lines) - pagel = 0xa7; - bs2 = 0xa0; - serial = no; - parallel = yes; - - # STK500v2 HV programming parameters, from XML - pp_controlstack = 0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f, - 0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f, - 0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b, - 0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00; - - # JTAG ICE mkII parameters, also from XML files - allowfullpagebitstream = no; - enablepageprogramming = yes; - idr = 0x51; - rampz = 0x00; - spmcr = 0x57; - eecr = 0x3f; - - memory "eeprom" - paged = no; - size = 512; - page_size = 4; - blocksize = 4; - readsize = 4; - num_pages = 128; - ; - - memory "flash" - paged = yes; - size = 40960; - page_size = 128; - blocksize = 128; - readsize = 128; - num_pages = 320; - ; - - memory "hfuse" - size = 1; - ; - - memory "lfuse" - size = 1; - ; - - memory "lockbits" - size = 1; - ; - - memory "signature" - size = 3; - ; -; - - diff --git a/bootloaders/gemma/gemma_v1.hex b/bootloaders/gemma/gemma_v1.hex deleted file mode 100644 index 4b688763..00000000 --- a/bootloaders/gemma/gemma_v1.hex +++ /dev/null @@ -1,182 +0,0 @@ -:100000005FCA5FCA5FCA5FCA5FCA5FCA5FCA5FCAA8 -:1014C00033C05FC08BC05DC05CC05BC05AC059C038 -:1014D00058C057C056C055C054C053C052C009026E -:1014E0001200010100803209040000000000000029 -:1014F00012011001FF00000841239F0C00010102AE -:1015000000010C03470065006D006D0061001603CB -:10151000410072006400750069006E006F002E00CB -:10152000630063000403090411241FBECFE5D2E069 -:10153000DEBFCDBF84B7877F84BF88E10FB6F89444 -:1015400081BD11BC0FBE91E080E80FB6F89486BD56 -:1015500096BD0FBE0AEA0F9310E0A0E6B0E0EEEDF4 -:10156000FFE102C005900D92A236B107D9F711E054 -:10157000A2E6B0E001C01D92A832B107E1F7EDD3B9 -:101580002CC59ECFA82FB92F80E090E041E050EA13 -:10159000609530E009C02D9182279795879510F0CE -:1015A00084279527305EC8F36F5FA8F30895EADFBC -:1015B0008D939D930895A6E088279927AA9569F0B1 -:1015C0000197E1F3B399FCCFB39BFECF81E099275C -:1015D000A6B3019611F0A871D9F70895CF93CFB7AC -:1015E000CF93C0915F02CA3A21F0CF91CFBFCF9184 -:1015F00065CFCC27C395B39BE9F7B39B0BC0B39BD7 -:1016000009C0B39B07C0B39B05C0B39B03C0B39B8A -:1016100001C0D3C00F92DF93C0910B01DD27CE5ED6 -:10162000DE4F012EB39B03C0DF910F90E6CF2F93C7 -:101630000F931F934F932FEF4F6F06B303FB20F9C8 -:101640005F933F9350E03BE065C016B301265029FD -:1016500053FDC89556B3012703FB25F92F7306B335 -:10166000B1F05027102713FB26F906B22230F0F014 -:1016700000C016B3012703FB27F90126502906B243 -:101680002430E8F54F77206816B30000F6CF5027D6 -:101690004F7D206206B2102F000000C006B3002666 -:1016A0005029102713FB26F906B2E2CF4F7B06B371 -:1016B000206400C0DACF01265029187106B269F102 -:1016C0004E7F2160012F16B328C0002650294D7F80 -:1016D00006B22260102F29C0012650294B7F06B286 -:1016E0002460012F2DC016B301265029477F2860A2 -:1016F000000006B22EC04F7E06B3206130C04227E4 -:1017000006B3499300265029102706B24FEF13FB6A -:1017100020F9297F16B379F2187159F10126502961 -:1017200006B2012703FB21F9237F06B371F20026DD -:1017300050293150D0F006B2102713FB22F9277E32 -:1017400016B351F201265029012703FB06B223F9F3 -:101750002F7C49F2000006B3102713FB24F9002662 -:10176000502906B22F7939F270CF10E21ABF002744 -:1017700017C03B503195C31BD04010E21ABF0881FF -:10178000033CF9F00B34E9F0209109011981110FA4 -:101790001213EDCF093651F10D3211F0013E39F738 -:1017A000009310013F915F914F911F910F912F91E5 -:1017B000DF910F90CAB7C5FD1DCFCF91CFBFCF919D -:1017C000189520911001222369F310910E01112325 -:1017D00021F5343022F130930E0120930A0110914B -:1017E0000B013BE0311B30930B0119C000910E013E -:1017F00001309CF40AE53091610034FD11C0009382 -:101800006100CEEFD0E010C0052710E000C021C07D -:10181000052710E0C89508BB14C03AE501C032EDB9 -:10182000032EC0E0D0E032E017B31861C39A08B3CA -:1018300017BB58E120E84FEF20FF052708BB27958D -:1018400017951C3F28F700004552B0F720FF0527E9 -:10185000279508BB17951C3FB8F629913A9561F773 -:10186000077E10910F01110F08BBC250D04011F03C -:101870001093090110E21ABF086017B3177E402FBA -:10188000477E54E05A95F1F708BB17BB48BB8ACF97 -:101890002091F9003091FA002D3B3441B8F421E059 -:1018A0002093F600F894E091F900F091FA000C0111 -:1018B00020935700E895112478948091F900909135 -:1018C000FA0002969093FA008093F90008958091AF -:1018D000F600882309F43DC08091F9009091FA0048 -:1018E000813C944108F035C0F8948091F9009091C2 -:1018F000FA008238944118F1809166009091670057 -:101900008F559A409F70906CEEEBF4E121E00C0152 -:1019100020935700E895112480916E0090916F00FC -:101920008C559A409F70906CECEBF4E10C01209385 -:101930005700E8951124789481E080936400E09149 -:10194000F900F091FA00329785E080935700E8950E -:1019500078941092F6000895FF920F931F93CF93FF -:10196000DF9380910E01835087FD5AC190910B0146 -:10197000ACE0B0E0A91BB109AE5EBE4F31E03093E0 -:10198000620090910A019D3209F00AC1883009F085 -:1019900045C183EC8093FE008AE58093610010923C -:1019A000FD008C91807609F47DC01092F3001092B6 -:1019B000F5001092F40011962C911197213009F442 -:1019C00069C0263021F481E08093FC0067C0273095 -:1019D00009F040C03093FC0089EE90E090930D0137 -:1019E00080930C0113969C9113979093EB001092A7 -:1019F000EC0012968C911297803379F491114CC0BF -:101A00001496EC911497F0E0EE0FFF1F81E28093A3 -:101A10005700E491E093EC003FC08C3A81F4903899 -:101A2000D9F514968C911497811136C015968C9126 -:101A30001597811131C081E08093E8002DC08C346E -:101A400059F515968C911597811126C081E08093E8 -:101A5000E70022C0283009F4B6CF14968D919C91EE -:101A600015979093FA008093F90016968C9116972B -:101A70008093F10087EF820F843080F48FE788BD78 -:101A80003093FB002093F2002A3051F081E08093E4 -:101A9000FC0006C021E077C024E075C020E073C0E0 -:101AA0002FEF68C012969C91129710920701119621 -:101AB0008C911197811106C01092080187E091E086 -:101AC00022E052C0853019F490930F013FC0863058 -:101AD000B9F513968C911397813019F480EF94E146 -:101AE00004C0823041F48EED94E190930D01809317 -:101AF0000C0122E121C08330F1F4911108C084E28D -:101B000095E190930D0180930C0124E015C0913074 -:101B100041F48EE095E190930D0180930C0126E154 -:101B20000BC0923041F482E095E190930D018093D7 -:101B30000C012CE001C020E080E48093FD0018C07F -:101B4000883079F0893031F49093110187E091E089 -:101B500020E00AC021E08A3009F020E087E091E02F -:101B600003C081E191E021E090930D0180930C018D -:101B70002F3F49F48C9187FF02C016962C9180E884 -:101B80008093FD000AC017968C911797811105C0AC -:101B900016968C91821708F4282F209360003EC07F -:101BA0009091FD0097FF3AC09091F100182F98177F -:101BB00008F4192F092F011B0093F1001092FC006B -:101BC0008091F2008A3029F0011128C01092600043 -:101BD00025C0FA2ECA2FDB2F8C2F8F198117A0F763 -:101BE0008091F9009091FA008034910590F421E001 -:101BF00020936500FC01EE0FFF1FEA59FF4F28817B -:101C000039813183208302969093FA008093F90002 -:101C100003C0888199813CDE2296DECF10920E01AE -:101C20008091610084FF7BC0809160008F3F09F448 -:101C300076C0182F893008F018E0811B809360006F -:101C40008091FE0098E889278093FE00112309F413 -:101C50005AC08091FD0087FF38C08091F100811744 -:101C600008F4182F811B8093F1003091F200E0916D -:101C7000F900F091FA0020E0AFEFB0E0211700F595 -:101C80003B3009F4FFCF3930D9F7E034F10560F487 -:101C9000EF01CC0FDD1FCA59DF4F888199818D93E9 -:101CA0009D932E5F3296EACFEC3B84E1F80710F06B -:101CB0008FEF01C084918C9311962F5F3196DECF08 -:101CC000F093FA00E093F9001EC0E0910C01F0914E -:101CD0000D0186FF0BC08FEF90E0DC0124912D9366 -:101CE0003196212F280F2A13F9CF09C08FEF90E0EA -:101CF000DC0121912D93212F280F2A13FACFF09385 -:101D00000D01E0930C01612F8FEF90E050DC1C5F20 -:101D10001C3019F08FEF809360001093610084E114 -:101D200096B3987131F48150D9F710920F01109247 -:101D30000901C1E08111C0E0809163008C1739F086 -:101D4000C11103C0F89401D17894C0936300DF916E -:101D5000CF911F910F91FF900895C1B7B99A83E277 -:101D60008ABD81E083BFAC9A8BB780628BBFBB9A80 -:101D70002FE132E18AE0215030408040E1F700C09D -:101D80000000BB987894E8DD8091E800882321F179 -:101D900082E090E09093F8008093F70013C0CF01A9 -:101DA0008F739927892B21F483E080935700E8955E -:101DB000D3DD8091F7009091F80002969093F8009F -:101DC0008093F700E091F700F091F800E03C94E197 -:101DD000F90728F31092E8008091E700882329F0A2 -:101DE000BBDD75DD1092E700B7DD809162008823CE -:101DF00041F08091FC00811104C08091FB008111B1 -:101E0000C2CF80916200882371F08091E600811139 -:101E10000AC088B5805F88BD88B5811104C08AB5C5 -:101E200090E189278ABD8091E6008F5F8093E6006C -:101E30008EEC90E00197F1F78091F4009091F5001D -:101E400001969093F5008093F4002091F3000097A1 -:101E500011F42F5F00C02093F30030916200311124 -:101E600005C081323EE4930708F05AC03091FC006F -:101E7000332321F08131974208F052C080916200F3 -:101E8000882309F480CF8091FB0081117CCF23301F -:101E900008F479CF45C080916400811149C08CEB72 -:101EA00094E19093FA008093F90081E08093F6002A -:101EB0000EDD3EC0DF01AA0FBB1FAA59BF4F8D9197 -:101EC0009C919F012B7F232B31F4E054FB4E859195 -:101ED0009491805A954FDCDCE091F900F091FA0082 -:101EE000E034F10538F3F3DC10925F0217BA13BE49 -:101EF0001ABC03C081B78F5F81BF81B78C17D0F345 -:101F000003C081B7815081BF81B7C817D0F391E07A -:101F100080E80FB6F89486BD96BD0FBED0CA13C038 -:101F200015BA1BBEF894809165008111B4CFDCCF47 -:101F3000E0E0F0E083E080935700E8951092FA002B -:101F40001092F900C9CF80E090E0DF92EF92FF920B -:101F50000F931F93CF93DF9390E080E80FB6F89430 -:101F600086BD96BD0FBE08E010E0F12C80E8E82E9B -:101F7000DF2CDE0CD1BE1FDBEC01C43389E0D807B7 -:101F80000CF4FD2CE694015011090115110581F79F -:101F90001F2D8FEF8F0D81BF21B730E0812F90E093 -:101FA00001968217930784F006DB8453994097FFCC -:101FB00003C09195819591098C179D0714F4F1B692 -:101FC000EC0181B78F5FE7CFF1BEDF91CF911F9119 -:0E1FD0000F91FF90EF90DF900895F894FFCFEF -:021FDE00FF5AA8 -:04000003000014C025 -:00000001FF diff --git a/bootloaders/gemma/usbconfig.h b/bootloaders/gemma/usbconfig.h deleted file mode 100644 index ca0c0213..00000000 --- a/bootloaders/gemma/usbconfig.h +++ /dev/null @@ -1,351 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 or v3 (see License.txt) - */ - -/* Modified by me@frank-zhao.com for project GemmaBoot - * - * GemmaBoot is a bootloader that emulates a USBtinyISP (from Adafruit Industries) - * - * Gemma will use GemmaBoot - * - * This code is heavily derived from USBaspLoader, but also from USBtiny, with USBtinyISP's settings - - Copyright (c) 2013 Adafruit Industries - All rights reserved. - - GemmaBoot is free software: you can redistribute it and/or modify - it under the terms of the GNU Lesser General Public License as - published by the Free Software Foundation, either version 3 of - the License, or (at your option) any later version. - - GemmaBoot is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with GemmaBoot. If not, see - . -*/ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -/* YOU SHOULD NOT NEED TO MODIFY THIS FILE! All configurations are supposed - * to go into bootloaderconfig.h! - */ - -/* ---------------------------- Hardware Config ---------------------------- */ - -/* All the port and pin assignments, as well as the clock speed and CRC - setting are now in bootloaderconfig.h: */ - -#include "bootloaderconfig.h" - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 0 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 0 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 10 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#ifndef USB_CFG_IS_SELF_POWERED // allow bootloaderconfig.h to override -#define USB_CFG_IS_SELF_POWERED 0 -#endif -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#ifndef USB_CFG_MAX_BUS_POWER // allow bootloaderconfig.h to override -#define USB_CFG_MAX_BUS_POWER 100 -#endif -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 1 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -#ifndef __ASSEMBLER__ -extern volatile char usbHasRxed; -#endif -#define USB_RX_USER_HOOK(data, len) do { usbHasRxed = 1; } while (0); -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 0 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 1 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID 0x41, 0x23 /* = 0x16c0 = 5824 = voti.nl */ -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - */ -#define USB_CFG_DEVICE_ID 0x9F, 0x0c /* = 0x05dc = 1500 */ -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x01 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'A','r','d','u','i','n','o','.','c','c' -#define USB_CFG_VENDOR_NAME_LEN 10 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'G','e','m','m','a' -#define USB_CFG_DEVICE_NAME_LEN 5 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0xFF /* set to 0 if deferred to interface */ -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 0 /* define class here if not at device level */ -#define USB_CFG_INTERFACE_SUBCLASS 0 -#define USB_CFG_INTERFACE_PROTOCOL 0 -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -/* #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 42 */ -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -#define USB_PUBLIC static -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short // scalar type yields shortest code - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -#define USB_INTR_CFG PCMSK -#define USB_INTR_CFG_SET (1 << USB_CFG_DPLUS_BIT) -#define USB_INTR_CFG_CLR 0 -#define USB_INTR_ENABLE GIMSK -#define USB_INTR_ENABLE_BIT PCIE -#define USB_INTR_PENDING GIFR -#define USB_INTR_PENDING_BIT PCIF -#define USB_INTR_VECTOR PCINT0_vect - -#endif /* __usbconfig_h_included__ */ diff --git a/bootloaders/gemma/usbconfig.patch b/bootloaders/gemma/usbconfig.patch deleted file mode 100644 index 1abb1583..00000000 --- a/bootloaders/gemma/usbconfig.patch +++ /dev/null @@ -1,24 +0,0 @@ -203c203 -< #define USB_CFG_VENDOR_ID 0x81, 0x17 /* = 0x16c0 = 5824 = voti.nl */ ---- -> #define USB_CFG_VENDOR_ID 0x41, 0x23 /* = 0x16c0 = 5824 = voti.nl */ -208c208 -< #define USB_CFG_DEVICE_ID 0x9F, 0x0C /* = 0x05dc = 1500 */ ---- -> #define USB_CFG_DEVICE_ID 0x9F, 0x0c /* = 0x05dc = 1500 */ -215c215 -< #define USB_CFG_DEVICE_VERSION 0x05, 0x01 ---- -> #define USB_CFG_DEVICE_VERSION 0x00, 0x01 -218,219c218,219 -< #define USB_CFG_VENDOR_NAME 'A','d','a','f','r','u','i','t' -< #define USB_CFG_VENDOR_NAME_LEN 8 ---- -> #define USB_CFG_VENDOR_NAME 'A','r','d','u','i','n','o','.','c','c' -> #define USB_CFG_VENDOR_NAME_LEN 10 -228,229c228,229 -< #define USB_CFG_DEVICE_NAME 'T','r','i','n','k','e','t' -< #define USB_CFG_DEVICE_NAME_LEN 7 ---- -> #define USB_CFG_DEVICE_NAME 'G','e','m','m','a' -> #define USB_CFG_DEVICE_NAME_LEN 5 diff --git a/bootloaders/lilypad/LilyPadBOOT_168.hex b/bootloaders/lilypad/LilyPadBOOT_168.hex deleted file mode 100644 index aea378e9..00000000 --- a/bootloaders/lilypad/LilyPadBOOT_168.hex +++ /dev/null @@ -1,117 +0,0 @@ -:103800000C94341C0C944F1C0C944F1C0C944F1CA7 -:103810000C944F1C0C944F1C0C944F1C0C944F1C7C -:103820000C944F1C0C944F1C0C944F1C0C944F1C6C -:103830000C944F1C0C944F1C0C944F1C0C944F1C5C -:103840000C944F1C0C944F1C0C944F1C0C944F1C4C -:103850000C944F1C0C944F1C0C944F1C0C944F1C3C -:103860000C944F1C0C944F1C11241FBECFEFD4E0BE -:10387000DEBFCDBF11E0A0E0B1E0E8E1FFE302C0B0 -:1038800005900D92A230B107D9F712E0A2E0B1E0A5 -:1038900001C01D92AD30B107E1F70C94311D0C94BD -:1038A000001CCF93DF93CDB7DEB724970FB6F89403 -:1038B000DEBF0FBECDBF382F882309F433E010924E -:1038C0000A02332309F44BC020E02D9A19821A8290 -:1038D0001B821C8289819A81AB81BC8180549F416B -:1038E000A040B040A0F489819A81AB81BC8101964F -:1038F000A11DB11D89839A83AB83BC8389819A8181 -:10390000AB81BC8180549F41A040B04060F32D98B2 -:1039100019821A821B821C8289819A81AB81BC81A7 -:1039200080549F41A040B040A0F489819A81AB812E -:10393000BC810196A11DB11D89839A83AB83BC8391 -:1039400089819A81AB81BC8180549F41A040B04065 -:1039500060F32F5F231708F4B8CF20930A02249650 -:103960000FB6F894DEBF0FBECDBFDF91CF910895A3 -:10397000EF92FF920F931F93EE24FF248701809113 -:10398000C00087FD17C00894E11CF11C011D111D2A -:1039900081E0E81689E0F8068DE3080780E0180763 -:1039A00070F3E0910201F091030109958091C0004C -:1039B00087FFE9CF8091C600992787FD90951F91D9 -:1039C0000F91FF90EF900895982F8091C00085FF90 -:1039D000FCCF9093C60008950E94B81C803271F00D -:1039E000809104018F5F80930401853009F0089570 -:1039F000E0910201F09103010995089584E10E948C -:103A0000E41C80E10E94E41C08951F93182F0E947B -:103A1000B81C803269F0809104018F5F80930401AB -:103A2000853079F4E0910201F0910301099509C014 -:103A300084E10E94E41C812F0E94E41C80E10E942A -:103A4000E41C1F910895282F882351F090E0809165 -:103A5000C00087FFFCCF8091C6009F5F2917B9F790 -:103A60000895CFEFD4E0DEBFCDBF000089E18093A1 -:103A7000C4001092C50088E18093C10086E0809365 -:103A8000C2005098589A259A83E00E94511C0E94C7 -:103A9000B81C8033B1F18133B9F1803409F454C0DA -:103AA000813409F45AC0823409F469C0853409F4B8 -:103AB0006CC0803531F1813521F1823511F18535C8 -:103AC00009F4B2C0863509F4BAC0843609F463C07B -:103AD000843709F4BBC0853709F40EC1863709F471 -:103AE0004AC0809104018F5F80930401853079F68C -:103AF000E0910201F091030109950E94B81C803306 -:103B000051F60E94EC1CC3CF0E94B81C803249F7CA -:103B100084E10E94E41C81E40E94E41C86E50E948A -:103B2000E41C82E50E94E41C80E20E94E41C89E41B -:103B30000E94E41C83E50E94E41C80E50E94E41CD2 -:103B400080E10E94E41CA3CF0E94B81C8638C8F212 -:103B50000E94B81C0E94EC1C9ACF0E94B81C8038AE -:103B600009F4F7C0813809F4F8C0823809F4F9C0C3 -:103B7000883909F4BDC080E00E94051D88CF84E12A -:103B80000E94231D0E94EC1C82CF85E00E94231D11 -:103B90000E94EC1C7CCF0E94B81C809309020E94FA -:103BA000B81C8093080280910C028E7F80930C02D7 -:103BB0000E94B81C853409F4C6C080910802909117 -:103BC0000902892B09F0ADC00E94B81C803209F0AF -:103BD00088CF80910C0280FFC8C08091080290912C -:103BE00009020097D1F02091060130910701E8E029 -:103BF000F1E0AC014E0F5F1FF999FECF32BD21BD40 -:103C0000819180BDFA9AF99A2F5F3F4F4E175F0757 -:103C100099F7309307012093060184E10E94E41C88 -:103C200080E10E94E41C33CF0E94B81C80930601FF -:103C30000E94B81C809307010E94EC1C28CF84E0EE -:103C40000E94231D80E00E94051D21CF0E94B81C08 -:103C5000809309020E94B81C809308020E94B81C3D -:103C6000853409F4F4C080910C028E7F80930C029D -:103C70008091060190910701880F991F9093070189 -:103C8000809306010E94B81C803209F000CF84E1C5 -:103C90000E94E41C2091080230910902211531058F -:103CA00019F1C0E0D0E0E0910601F09107018091A8 -:103CB0000C0280FFC4C0F999FECFF2BDE1BDF89AB5 -:103CC00080B50E94E41CE0910601F0910701319655 -:103CD000F0930701E0930601209108023091090258 -:103CE0002196C217D30718F380E10E94E41CCFCEBF -:103CF00083E00E94051DCBCE0E94B81C803209F0E3 -:103D0000F0CE84E10E94E41C8EE10E94E41C84E970 -:103D10000E94E41C86E00E94E41C80E10E94E41CF6 -:103D2000B6CEC0E0D0E008E011E00E94B81CF80177 -:103D300081938F0121968091080290910902C81702 -:103D4000D90798F341CF80910C02816080930C02D7 -:103D500034CF82E00E94051D9ACE81E00E94051DAD -:103D600096CE80E10E94051D92CE8091070187FDCD -:103D700080C010920B028091060190910701880F7C -:103D8000991F90930701809306018091080280FF9C -:103D900009C080910802909109020196909309024E -:103DA00080930802F894F999FECF1127E09106015B -:103DB000F0910701C8E0D1E08091080290910902DA -:103DC000103091F40091570001700130D9F303E0F5 -:103DD00000935700E8950091570001700130D9F326 -:103DE00001E100935700E895099019900091570060 -:103DF00001700130D9F301E000935700E895139565 -:103E0000103498F011270091570001700130D9F358 -:103E100005E000935700E8950091570001700130CC -:103E2000D9F301E100935700E8953296029709F023 -:103E3000C7CF103011F00296E5CF1124EECE81FFEE -:103E40000CC03196F0930701E093060149CF8091B1 -:103E50000C02816080930C0215CF84910E94E41CB7 -:103E60002091080230910902E0910601F0910701CA -:103E7000E8CF81E080930B027ECF0F931F930E94C7 -:103E8000B81C182F0E94E41C0E94B81C082F0E9426 -:103E9000E41C11362CF0175501363CF0075508C0CC -:103EA0001033D4F310530136CCF700330CF0005329 -:103EB0001295107F100F812F992787FD90951F91E4 -:103EC0000F9108951F93282F992787FD9095807F44 -:103ED00090709595879595958795959587959595E6 -:103EE00087958A304CF0982F995A822F8F708A309C -:103EF0004CF0182F195A08C0982F905D822F8F70A0 -:103F00008A30BCF7182F105D892F0E94E41C812F86 -:083F10000E94E41C1F910895BA -:023F1800800027 -:0400000300003800C1 -:00000001FF diff --git a/bootloaders/lilypad/src/ATmegaBOOT.c b/bootloaders/lilypad/src/ATmegaBOOT.c deleted file mode 100644 index 415babee..00000000 --- a/bootloaders/lilypad/src/ATmegaBOOT.c +++ /dev/null @@ -1,977 +0,0 @@ -/**********************************************************/ -/* Serial Bootloader for Atmel megaAVR Controllers */ -/* */ -/* tested with ATmega8, ATmega128 and ATmega168 */ -/* should work with other mega's, see code for details */ -/* */ -/* ATmegaBOOT.c */ -/* */ -/* 20070626: hacked for Arduino Diecimila (which auto- */ -/* resets when a USB connection is made to it) */ -/* by D. Mellis */ -/* 20060802: hacked for Arduino by D. Cuartielles */ -/* based on a previous hack by D. Mellis */ -/* and D. Cuartielles */ -/* */ -/* Monitor and debug functions were added to the original */ -/* code by Dr. Erik Lins, chip45.com. (See below) */ -/* */ -/* Thanks to Karl Pitrich for fixing a bootloader pin */ -/* problem and more informative LED blinking! */ -/* */ -/* For the latest version see: */ -/* http://www.chip45.com/ */ -/* */ -/* ------------------------------------------------------ */ -/* */ -/* based on stk500boot.c */ -/* Copyright (c) 2003, Jason P. Kyle */ -/* All rights reserved. */ -/* see avr1.org for original file and information */ -/* */ -/* This program is free software; you can redistribute it */ -/* and/or modify it under the terms of the GNU General */ -/* Public License as published by the Free Software */ -/* Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will */ -/* be useful, but WITHOUT ANY WARRANTY; without even the */ -/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ -/* PARTICULAR PURPOSE. See the GNU General Public */ -/* License for more details. */ -/* */ -/* You should have received a copy of the GNU General */ -/* Public License along with this program; if not, write */ -/* to the Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* */ -/* Licence can be viewed at */ -/* http://www.fsf.org/licenses/gpl.txt */ -/* */ -/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ -/* m8515,m8535. ATmega161 has a very small boot block so */ -/* isn't supported. */ -/* */ -/* Tested with m168 */ -/**********************************************************/ - - -/* some includes */ -#include -#include -#include -#include -#include - - -/* the current avr-libc eeprom functions do not support the ATmega168 */ -/* own eeprom write/read functions are used instead */ -#ifndef __AVR_ATmega168__ -#include -#endif - -/* Use the F_CPU defined in Makefile */ - -/* 20060803: hacked by DojoCorp */ -/* 20070626: hacked by David A. Mellis to decrease waiting time for auto-reset */ -/* set the waiting time for the bootloader */ -/* get this from the Makefile instead */ -/* #define MAX_TIME_COUNT (F_CPU>>4) */ - -/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ -#define MAX_ERROR_COUNT 5 - -/* set the UART baud rate */ -/* 20060803: hacked by DojoCorp */ -//#define BAUD_RATE 115200 -#define BAUD_RATE 19200 - - -/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ -/* never allow AVR Studio to do an update !!!! */ -#define HW_VER 0x02 -#define SW_MAJOR 0x01 -#define SW_MINOR 0x10 - - -/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ -/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ -/* BL0... means UART0, BL1... means UART1 */ -#ifdef __AVR_ATmega128__ -#define BL_DDR DDRF -#define BL_PORT PORTF -#define BL_PIN PINF -#define BL0 PINF7 -#define BL1 PINF6 -#else -/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ -#define BL_DDR DDRD -#define BL_PORT PORTD -#define BL_PIN PIND -#define BL PIND6 -#endif - - -/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ -/* if monitor functions are included, LED goes on after monitor was entered */ -#ifdef __AVR_ATmega128__ -/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128) */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -#define LED PINB7 -#else -/* Onboard LED is connected to pin PB2 (e.g. Crumb8, Crumb168) */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -/* 20060803: hacked by DojoCorp, LED pin is B5 in Arduino */ -/* #define LED PINB2 */ -#define LED PINB5 -#endif - - -/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ -#ifdef __AVR_ATmega128__ -#define MONITOR -#endif - - -/* define various device id's */ -/* manufacturer byte is always the same */ -#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( - -#if defined __AVR_ATmega128__ -#define SIG2 0x97 -#define SIG3 0x02 -#define PAGE_SIZE 0x80U //128 words - -#elif defined __AVR_ATmega64__ -#define SIG2 0x96 -#define SIG3 0x02 -#define PAGE_SIZE 0x80U //128 words - -#elif defined __AVR_ATmega32__ -#define SIG2 0x95 -#define SIG3 0x02 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega16__ -#define SIG2 0x94 -#define SIG3 0x03 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega8__ -#define SIG2 0x93 -#define SIG3 0x07 -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega88__ -#define SIG2 0x93 -#define SIG3 0x0a -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega168__ -#define SIG2 0x94 -#define SIG3 0x06 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega162__ -#define SIG2 0x94 -#define SIG3 0x04 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega163__ -#define SIG2 0x94 -#define SIG3 0x02 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega169__ -#define SIG2 0x94 -#define SIG3 0x05 -#define PAGE_SIZE 0x40U //64 words - -#elif defined __AVR_ATmega8515__ -#define SIG2 0x93 -#define SIG3 0x06 -#define PAGE_SIZE 0x20U //32 words - -#elif defined __AVR_ATmega8535__ -#define SIG2 0x93 -#define SIG3 0x08 -#define PAGE_SIZE 0x20U //32 words -#endif - - -/* function prototypes */ -void putch(char); -char getch(void); -void getNch(uint8_t); -void byte_response(uint8_t); -void nothing_response(void); -char gethex(void); -void puthex(char); -void flash_led(uint8_t); - -/* some variables */ -union address_union { - uint16_t word; - uint8_t byte[2]; -} address; - -union length_union { - uint16_t word; - uint8_t byte[2]; -} length; - -struct flags_struct { - unsigned eeprom : 1; - unsigned rampz : 1; -} flags; - -uint8_t buff[256]; -uint8_t address_high; - -uint8_t pagesz=0x80; - -uint8_t i; -uint8_t bootuart = 0; - -uint8_t error_count = 0; - -void (*app_start)(void) = 0x0000; - - -/* main program starts here */ -int main(void) -{ - uint8_t ch,ch2; - uint16_t w; - - asm volatile("nop\n\t"); - - /* set pin direction for bootloader pin and enable pullup */ - /* for ATmega128, two pins need to be initialized */ -#ifdef __AVR_ATmega128__ - BL_DDR &= ~_BV(BL0); - BL_DDR &= ~_BV(BL1); - BL_PORT |= _BV(BL0); - BL_PORT |= _BV(BL1); -#else - /* We run the bootloader regardless of the state of this pin. Thus, don't - put it in a different state than the other pins. --DAM, 070709 - BL_DDR &= ~_BV(BL); - BL_PORT |= _BV(BL); - */ -#endif - - -#ifdef __AVR_ATmega128__ - /* check which UART should be used for booting */ - if(bit_is_clear(BL_PIN, BL0)) { - bootuart = 1; - } - else if(bit_is_clear(BL_PIN, BL1)) { - bootuart = 2; - } -#endif - - /* check if flash is programmed already, if not start bootloader anyway */ - if(pgm_read_byte_near(0x0000) != 0xFF) { - -#ifdef __AVR_ATmega128__ - /* no UART was selected, start application */ - if(!bootuart) { - app_start(); - } -#else - /* check if bootloader pin is set low */ - /* we don't start this part neither for the m8, nor m168 */ - //if(bit_is_set(BL_PIN, BL)) { - // app_start(); - // } -#endif - } - -#ifdef __AVR_ATmega128__ - /* no bootuart was selected, default to uart 0 */ - if(!bootuart) { - bootuart = 1; - } -#endif - - - /* initialize UART(s) depending on CPU defined */ -#ifdef __AVR_ATmega128__ - if(bootuart == 1) { - UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSR0A = 0x00; - UCSR0C = 0x06; - UCSR0B = _BV(TXEN0)|_BV(RXEN0); - } - if(bootuart == 2) { - UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSR1A = 0x00; - UCSR1C = 0x06; - UCSR1B = _BV(TXEN1)|_BV(RXEN1); - } -#elif defined __AVR_ATmega163__ - UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSRA = 0x00; - UCSRB = _BV(TXEN)|_BV(RXEN); -#elif defined __AVR_ATmega168__ - UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); - UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; - UCSR0B = (1<>8; // set baud rate - UBRRL = (((F_CPU/BAUD_RATE)/16)-1); - UCSRB = (1<> 8; - UCSRA = 0x00; - UCSRC = 0x06; - UCSRB = _BV(TXEN)|_BV(RXEN); -#endif - - /* set LED pin as output */ - LED_DDR |= _BV(LED); - - - /* flash onboard LED to signal entering of bootloader */ -#ifdef __AVR_ATmega128__ - // 4x for UART0, 5x for UART1 - flash_led(NUM_LED_FLASHES + bootuart); -#else - flash_led(NUM_LED_FLASHES); -#endif - - /* 20050803: by DojoCorp, this is one of the parts provoking the - system to stop listening, cancelled from the original */ - //putch('\0'); - - - /* forever loop */ - for (;;) { - - /* get character from UART */ - ch = getch(); - - /* A bunch of if...else if... gives smaller code than switch...case ! */ - - /* Hello is anyone home ? */ - if(ch=='0') { - nothing_response(); - } - - - /* Request programmer ID */ - /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ - /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ - else if(ch=='1') { - if (getch() == ' ') { - putch(0x14); - putch('A'); - putch('V'); - putch('R'); - putch(' '); - putch('I'); - putch('S'); - putch('P'); - putch(0x10); - } else { - if (++error_count == MAX_ERROR_COUNT) - app_start(); - } - } - - - /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ - else if(ch=='@') { - ch2 = getch(); - if (ch2>0x85) getch(); - nothing_response(); - } - - - /* AVR ISP/STK500 board requests */ - else if(ch=='A') { - ch2 = getch(); - if(ch2==0x80) byte_response(HW_VER); // Hardware version - else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version - else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version - else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 - else byte_response(0x00); // Covers various unnecessary responses we don't care about - } - - - /* Device Parameters DON'T CARE, DEVICE IS FIXED */ - else if(ch=='B') { - getNch(20); - nothing_response(); - } - - - /* Parallel programming stuff DON'T CARE */ - else if(ch=='E') { - getNch(5); - nothing_response(); - } - - - /* Enter programming mode */ - else if(ch=='P') { - nothing_response(); - } - - - /* Leave programming mode */ - else if(ch=='Q') { - nothing_response(); - } - - - /* Erase device, don't care as we will erase one page at a time anyway. */ - else if(ch=='R') { - nothing_response(); - } - - - /* Set address, little endian. EEPROM in bytes, FLASH in words */ - /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ - /* This might explain why little endian was used here, big endian used everywhere else. */ - else if(ch=='U') { - address.byte[0] = getch(); - address.byte[1] = getch(); - nothing_response(); - } - - - /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ - else if(ch=='V') { - getNch(4); - byte_response(0x00); - } - - - /* Write memory, length is big endian and is in bytes */ - else if(ch=='d') { - length.byte[1] = getch(); - length.byte[0] = getch(); - flags.eeprom = 0; - if (getch() == 'E') flags.eeprom = 1; - for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME - else address_high = 0x00; -#ifdef __AVR_ATmega128__ - RAMPZ = address_high; -#endif - address.word = address.word << 1; //address * 2 -> byte location - /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ - if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes - cli(); //Disable interrupts, just to be sure - // HACKME: EEPE used to be EEWE - while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete - asm volatile( - "clr r17 \n\t" //page_word_count - "lds r30,address \n\t" //Address of FLASH location (in bytes) - "lds r31,address+1 \n\t" - "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM - "ldi r29,hi8(buff) \n\t" - "lds r24,length \n\t" //Length of data to be written (in bytes) - "lds r25,length+1 \n\t" - "length_loop: \n\t" //Main loop, repeat for number of words in block - "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page - "brne no_page_erase \n\t" - "wait_spm1: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm1 \n\t" - "ldi r16,0x03 \n\t" //Erase page pointed to by Z - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "wait_spm2: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm2 \n\t" - - "ldi r16,0x11 \n\t" //Re-enable RWW section - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "no_page_erase: \n\t" - "ld r0,Y+ \n\t" //Write 2 bytes into page buffer - "ld r1,Y+ \n\t" - - "wait_spm3: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm3 \n\t" - "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer - "sts %0,r16 \n\t" - "spm \n\t" - - "inc r17 \n\t" //page_word_count++ - "cpi r17,%1 \n\t" - "brlo same_page \n\t" //Still same page in FLASH - "write_page: \n\t" - "clr r17 \n\t" //New page, write current one first - "wait_spm4: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm4 \n\t" -#ifdef __AVR_ATmega163__ - "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write -#endif - "ldi r16,0x05 \n\t" //Write page pointed to by Z - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" - "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) -#endif - "wait_spm5: \n\t" - "lds r16,%0 \n\t" //Wait for previous spm to complete - "andi r16,1 \n\t" - "cpi r16,1 \n\t" - "breq wait_spm5 \n\t" - "ldi r16,0x11 \n\t" //Re-enable RWW section - "sts %0,r16 \n\t" - "spm \n\t" -#ifdef __AVR_ATmega163__ - ".word 0xFFFF \n\t" - "nop \n\t" -#endif - "same_page: \n\t" - "adiw r30,2 \n\t" //Next word in FLASH - "sbiw r24,2 \n\t" //length-2 - "breq final_write \n\t" //Finished - "rjmp length_loop \n\t" - "final_write: \n\t" - "cpi r17,0 \n\t" - "breq block_done \n\t" - "adiw r24,2 \n\t" //length+2, fool above check on length after short page write - "rjmp write_page \n\t" - "block_done: \n\t" - "clr __zero_reg__ \n\t" //restore zero register -#if defined __AVR_ATmega168__ - : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" -#else - : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" -#endif - ); - /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ - /* exit the bootloader without a power cycle anyhow */ - } - putch(0x14); - putch(0x10); - } else { - if (++error_count == MAX_ERROR_COUNT) - app_start(); - } - } - - - /* Read memory block mode, length is big endian. */ - else if(ch=='t') { - length.byte[1] = getch(); - length.byte[0] = getch(); -#if defined __AVR_ATmega128__ - if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME - else flags.rampz = 0; -#endif - if (getch() == 'E') flags.eeprom = 1; - else { - flags.eeprom = 0; - address.word = address.word << 1; // address * 2 -> byte location - } - if (getch() == ' ') { // Command terminator - putch(0x14); - for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay - if (flags.eeprom) { // Byte access EEPROM read -#ifdef __AVR_ATmega168__ - while(EECR & (1<= 'a') { - ah = ah - 'a' + 0x0a; - } else if(ah >= '0') { - ah -= '0'; - } - if(al >= 'a') { - al = al - 'a' + 0x0a; - } else if(al >= '0') { - al -= '0'; - } - return (ah << 4) + al; -} - - -void puthex(char ch) { - char ah,al; - - ah = (ch & 0xf0) >> 4; - if(ah >= 0x0a) { - ah = ah - 0x0a + 'a'; - } else { - ah += '0'; - } - al = (ch & 0x0f); - if(al >= 0x0a) { - al = al - 0x0a + 'a'; - } else { - al += '0'; - } - putch(ah); - putch(al); -} - - -void putch(char ch) -{ -#ifdef __AVR_ATmega128__ - if(bootuart == 1) { - while (!(UCSR0A & _BV(UDRE0))); - UDR0 = ch; - } - else if (bootuart == 2) { - while (!(UCSR1A & _BV(UDRE1))); - UDR1 = ch; - } -#elif defined __AVR_ATmega168__ - while (!(UCSR0A & _BV(UDRE0))); - UDR0 = ch; -#else - /* m8,16,32,169,8515,8535,163 */ - while (!(UCSRA & _BV(UDRE))); - UDR = ch; -#endif -} - - -char getch(void) -{ -#ifdef __AVR_ATmega128__ - if(bootuart == 1) { - while(!(UCSR0A & _BV(RXC0))); - return UDR0; - } - else if(bootuart == 2) { - while(!(UCSR1A & _BV(RXC1))); - return UDR1; - } - return 0; -#elif defined __AVR_ATmega168__ - uint32_t count = 0; - while(!(UCSR0A & _BV(RXC0))){ - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - return UDR0; -#else - /* m8,16,32,169,8515,8535,163 */ - uint32_t count = 0; - while(!(UCSRA & _BV(RXC))){ - /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ - /* HACKME:: here is a good place to count times*/ - count++; - if (count > MAX_TIME_COUNT) - app_start(); - } - return UDR; -#endif -} - - -void getNch(uint8_t count) -{ - uint8_t i; - for(i=0;i $@ - -%.srec: %.elf - $(OBJCOPY) -j .text -j .data -O srec $< $@ - -%.bin: %.elf - $(OBJCOPY) -j .text -j .data -O binary $< $@ - -clean: - rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex - -install: - avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xe2:m - avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U flash:w:ATmegaBOOT_168.hex -U lock:w:0x0f:m diff --git a/bootloaders/optiboot/Makefile b/bootloaders/optiboot/Makefile deleted file mode 100644 index f8d137de..00000000 --- a/bootloaders/optiboot/Makefile +++ /dev/null @@ -1,450 +0,0 @@ -# Makefile for ATmegaBOOT -# E.Lins, 18.7.2005 -# -# Instructions -# -# To make bootloader .hex file: -# make diecimila -# make lilypad -# make ng -# etc... -# -# To burn bootloader .hex file: -# make diecimila_isp -# make lilypad_isp -# make ng_isp -# etc... - -# program name should not be changed... -PROGRAM = optiboot - -# The default behavior is to build using tools that are in the users -# current path variables, but we can also build using an installed -# Arduino user IDE setup, or the Arduino source tree. -# Uncomment this next lines to build within the arduino environment, -# using the arduino-included avrgcc toolset (mac and pc) -# ENV ?= arduino -# ENV ?= arduinodev -# OS ?= macosx -# OS ?= windows - - -# enter the parameters for the avrdude isp tool -ISPTOOL = stk500v2 -ISPPORT = usb -ISPSPEED = -b 115200 - -MCU_TARGET = atmega168 -LDSECTIONS = -Wl,--section-start=.text=0x3e00 -Wl,--section-start=.version=0x3ffe - -# Build environments -# Start of some ugly makefile-isms to allow optiboot to be built -# in several different environments. See the README.TXT file for -# details. - -# default -fixpath = $(1) - -ifeq ($(ENV), arduino) -# For Arduino, we assume that we're connected to the optiboot directory -# included with the arduino distribution, which means that the full set -# of avr-tools are "right up there" in standard places. -TOOLROOT = ../../../tools -GCCROOT = $(TOOLROOT)/avr/bin/ -AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf - -ifeq ($(OS), windows) -# On windows, SOME of the tool paths will need to have backslashes instead -# of forward slashes (because they use windows cmd.exe for execution instead -# of a unix/mingw shell?) We also have to ensure that a consistent shell -# is used even if a unix shell is installed (ie as part of WINAVR) -fixpath = $(subst /,\,$1) -SHELL = cmd.exe -endif - -else ifeq ($(ENV), arduinodev) -# Arduino IDE source code environment. Use the unpacked compilers created -# by the build (you'll need to do "ant build" first.) -ifeq ($(OS), macosx) -TOOLROOT = ../../../../build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools -endif -ifeq ($(OS), windows) -TOOLROOT = ../../../../build/windows/work/hardware/tools -endif - -GCCROOT = $(TOOLROOT)/avr/bin/ -AVRDUDE_CONF = -C$(TOOLROOT)/avr/etc/avrdude.conf - -else -GCCROOT = -AVRDUDE_CONF = -endif -# -# End of build environment code. - - -# the efuse should really be 0xf8; since, however, only the lower -# three bits of that byte are used on the atmega168, avrdude gets -# confused if you specify 1's for the higher bits, see: -# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ -# -# similarly, the lock bits should be 0xff instead of 0x3f (to -# unlock the bootloader section) and 0xcf instead of 0x2f (to -# lock it), but since the high two bits of the lock byte are -# unused, avrdude would get confused. - -ISPFUSES = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ - -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ - -e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m \ - -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m -ISPFLASH = $(GCCROOT)avrdude $(AVRDUDE_CONF) -c $(ISPTOOL) \ - -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ - -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x2f:m - -STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" -STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ --lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt -STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt - -OBJ = $(PROGRAM).o -OPTIMIZE = -Os -fno-inline-small-functions -fno-split-wide-types -mshort-calls - -DEFS = -LIBS = - -CC = $(GCCROOT)avr-gcc - -# Override is only needed by avr-lib build system. - -override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) -override LDFLAGS = $(LDSECTIONS) -Wl,--relax -Wl,--gc-sections -nostartfiles -nostdlib - -OBJCOPY = $(GCCROOT)avr-objcopy -OBJDUMP = $(call fixpath,$(GCCROOT)avr-objdump) - -SIZE = $(GCCROOT)avr-size - -# Test platforms -# Virtual boot block test -virboot328: TARGET = atmega328 -virboot328: MCU_TARGET = atmega328p -virboot328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DVIRTUAL_BOOT' -virboot328: AVR_FREQ = 16000000L -virboot328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe -virboot328: $(PROGRAM)_atmega328.hex -virboot328: $(PROGRAM)_atmega328.lst - -# 20MHz clocked platforms -# -# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) -# - -pro20: TARGET = pro_20mhz -pro20: MCU_TARGET = atmega168 -pro20: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -pro20: AVR_FREQ = 20000000L -pro20: $(PROGRAM)_pro_20mhz.hex -pro20: $(PROGRAM)_pro_20mhz.lst - -pro20_isp: pro20 -pro20_isp: TARGET = pro_20mhz -# 2.7V brownout -pro20_isp: HFUSE = DD -# Full swing xtal (20MHz) 258CK/14CK+4.1ms -pro20_isp: LFUSE = C6 -# 512 byte boot -pro20_isp: EFUSE = 04 -pro20_isp: isp - -# 16MHz clocked platforms -# -# These are capable of 230400 baud, or 115200 baud on PC (Arduino Avrdude issue) -# - -pro16: TARGET = pro_16MHz -pro16: MCU_TARGET = atmega168 -pro16: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -pro16: AVR_FREQ = 16000000L -pro16: $(PROGRAM)_pro_16MHz.hex -pro16: $(PROGRAM)_pro_16MHz.lst - -pro16_isp: pro16 -pro16_isp: TARGET = pro_16MHz -# 2.7V brownout -pro16_isp: HFUSE = DD -# Full swing xtal (20MHz) 258CK/14CK+4.1ms -pro16_isp: LFUSE = C6 -# 512 byte boot -pro16_isp: EFUSE = 04 -pro16_isp: isp - -# Diecimila, Duemilanove with m168, and NG use identical bootloaders -# Call it "atmega168" for generality and clarity, keep "diecimila" for -# backward compatibility of makefile -# -atmega168: TARGET = atmega168 -atmega168: MCU_TARGET = atmega168 -atmega168: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -atmega168: AVR_FREQ = 16000000L -atmega168: $(PROGRAM)_atmega168.hex -atmega168: $(PROGRAM)_atmega168.lst - -atmega168_isp: atmega168 -atmega168_isp: TARGET = atmega168 -# 2.7V brownout -atmega168_isp: HFUSE = DD -# Low power xtal (16MHz) 16KCK/14CK+65ms -atmega168_isp: LFUSE = FF -# 512 byte boot -atmega168_isp: EFUSE = 04 -atmega168_isp: isp - -diecimila: TARGET = diecimila -diecimila: MCU_TARGET = atmega168 -diecimila: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -diecimila: AVR_FREQ = 16000000L -diecimila: $(PROGRAM)_diecimila.hex -diecimila: $(PROGRAM)_diecimila.lst - -diecimila_isp: diecimila -diecimila_isp: TARGET = diecimila -# 2.7V brownout -diecimila_isp: HFUSE = DD -# Low power xtal (16MHz) 16KCK/14CK+65ms -diecimila_isp: LFUSE = FF -# 512 byte boot -diecimila_isp: EFUSE = 04 -diecimila_isp: isp - -atmega328: TARGET = atmega328 -atmega328: MCU_TARGET = atmega328p -atmega328: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -atmega328: AVR_FREQ = 16000000L -atmega328: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe -atmega328: $(PROGRAM)_atmega328.hex -atmega328: $(PROGRAM)_atmega328.lst - -atmega328_isp: atmega328 -atmega328_isp: TARGET = atmega328 -atmega328_isp: MCU_TARGET = atmega328p -# 512 byte boot, SPIEN -atmega328_isp: HFUSE = DE -# Low power xtal (16MHz) 16KCK/14CK+65ms -atmega328_isp: LFUSE = FF -# 2.7V brownout -atmega328_isp: EFUSE = 05 -atmega328_isp: isp - -# Sanguino has a minimum boot size of 1024 bytes, so enable extra functions -# -sanguino: TARGET = atmega644p -sanguino: MCU_TARGET = atmega644p -sanguino: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT' -sanguino: AVR_FREQ = 16000000L -sanguino: LDSECTIONS = -Wl,--section-start=.text=0xfc00 -sanguino: $(PROGRAM)_atmega644p.hex -sanguino: $(PROGRAM)_atmega644p.lst - -sanguino_isp: sanguino -sanguino_isp: TARGET = atmega644p -sanguino_isp: MCU_TARGET = atmega644p -# 1024 byte boot -sanguino_isp: HFUSE = DE -# Low power xtal (16MHz) 16KCK/14CK+65ms -sanguino_isp: LFUSE = FF -# 2.7V brownout -sanguino_isp: EFUSE = 05 -sanguino_isp: isp - -# Mega has a minimum boot size of 1024 bytes, so enable extra functions -#mega: TARGET = atmega1280 -mega: MCU_TARGET = atmega1280 -mega: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' '-DBIGBOOT' -mega: AVR_FREQ = 16000000L -mega: LDSECTIONS = -Wl,--section-start=.text=0x1fc00 -mega: $(PROGRAM)_atmega1280.hex -mega: $(PROGRAM)_atmega1280.lst - -mega_isp: mega -mega_isp: TARGET = atmega1280 -mega_isp: MCU_TARGET = atmega1280 -# 1024 byte boot -mega_isp: HFUSE = DE -# Low power xtal (16MHz) 16KCK/14CK+65ms -mega_isp: LFUSE = FF -# 2.7V brownout -mega_isp: EFUSE = 05 -mega_isp: isp - -# ATmega8 -# -atmega8: TARGET = atmega8 -atmega8: MCU_TARGET = atmega8 -atmega8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -atmega8: AVR_FREQ = 16000000L -atmega8: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe -atmega8: $(PROGRAM)_atmega8.hex -atmega8: $(PROGRAM)_atmega8.lst - -atmega8_isp: atmega8 -atmega8_isp: TARGET = atmega8 -atmega8_isp: MCU_TARGET = atmega8 -# SPIEN, CKOPT, Bootsize=512B -atmega8_isp: HFUSE = CC -# 2.7V brownout, Low power xtal (16MHz) 16KCK/14CK+65ms -atmega8_isp: LFUSE = BF -atmega8_isp: isp - -# ATmega88 -# -atmega88: TARGET = atmega88 -atmega88: MCU_TARGET = atmega88 -atmega88: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -atmega88: AVR_FREQ = 16000000L -atmega88: LDSECTIONS = -Wl,--section-start=.text=0x1e00 -Wl,--section-start=.version=0x1ffe -atmega88: $(PROGRAM)_atmega88.hex -atmega88: $(PROGRAM)_atmega88.lst - -atmega88_isp: atmega88 -atmega88_isp: TARGET = atmega88 -atmega88_isp: MCU_TARGET = atmega88 -# 2.7V brownout -atmega88_isp: HFUSE = DD -# Low power xtal (16MHz) 16KCK/14CK+65ms -atemga88_isp: LFUSE = FF -# 512 byte boot -atmega88_isp: EFUSE = 04 -atmega88_isp: isp - - -# 8MHz clocked platforms -# -# These are capable of 115200 baud -# - -lilypad: TARGET = lilypad -lilypad: MCU_TARGET = atmega168 -lilypad: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -lilypad: AVR_FREQ = 8000000L -lilypad: $(PROGRAM)_lilypad.hex -lilypad: $(PROGRAM)_lilypad.lst - -lilypad_isp: lilypad -lilypad_isp: TARGET = lilypad -# 2.7V brownout -lilypad_isp: HFUSE = DD -# Internal 8MHz osc (8MHz) Slow rising power -lilypad_isp: LFUSE = E2 -# 512 byte boot -lilypad_isp: EFUSE = 04 -lilypad_isp: isp - -lilypad_resonator: TARGET = lilypad_resonator -lilypad_resonator: MCU_TARGET = atmega168 -lilypad_resonator: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -lilypad_resonator: AVR_FREQ = 8000000L -lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex -lilypad_resonator: $(PROGRAM)_lilypad_resonator.lst - -lilypad_resonator_isp: lilypad_resonator -lilypad_resonator_isp: TARGET = lilypad_resonator -# 2.7V brownout -lilypad_resonator_isp: HFUSE = DD -# Full swing xtal (20MHz) 258CK/14CK+4.1ms -lilypad_resonator_isp: LFUSE = C6 -# 512 byte boot -lilypad_resonator_isp: EFUSE = 04 -lilypad_resonator_isp: isp - -pro8: TARGET = pro_8MHz -pro8: MCU_TARGET = atmega168 -pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -pro8: AVR_FREQ = 8000000L -pro8: $(PROGRAM)_pro_8MHz.hex -pro8: $(PROGRAM)_pro_8MHz.lst - -pro8_isp: pro8 -pro8_isp: TARGET = pro_8MHz -# 2.7V brownout -pro8_isp: HFUSE = DD -# Full swing xtal (20MHz) 258CK/14CK+4.1ms -pro8_isp: LFUSE = C6 -# 512 byte boot -pro8_isp: EFUSE = 04 -pro8_isp: isp - -atmega328_pro8: TARGET = atmega328_pro_8MHz -atmega328_pro8: MCU_TARGET = atmega328p -atmega328_pro8: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' -atmega328_pro8: AVR_FREQ = 8000000L -atmega328_pro8: LDSECTIONS = -Wl,--section-start=.text=0x7e00 -Wl,--section-start=.version=0x7ffe -atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex -atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.lst - -atmega328_pro8_isp: atmega328_pro8 -atmega328_pro8_isp: TARGET = atmega328_pro_8MHz -atmega328_pro8_isp: MCU_TARGET = atmega328p -# 512 byte boot, SPIEN -atmega328_pro8_isp: HFUSE = DE -# Low power xtal (16MHz) 16KCK/14CK+65ms -atmega328_pro8_isp: LFUSE = FF -# 2.7V brownout -atmega328_pro8_isp: EFUSE = 05 -atmega328_pro8_isp: isp - -# 1MHz clocked platforms -# -# These are capable of 9600 baud -# - -luminet: TARGET = luminet -luminet: MCU_TARGET = attiny84 -luminet: CFLAGS += '-DLED_START_FLASHES=3' '-DSOFT_UART' '-DBAUD_RATE=9600' -luminet: CFLAGS += '-DVIRTUAL_BOOT_PARTITION' -luminet: AVR_FREQ = 1000000L -luminet: LDSECTIONS = -Wl,--section-start=.text=0x1d00 -Wl,--section-start=.version=0x1efe -luminet: $(PROGRAM)_luminet.hex -luminet: $(PROGRAM)_luminet.lst - -luminet_isp: luminet -luminet_isp: TARGET = luminet -luminet_isp: MCU_TARGET = attiny84 -# Brownout disabled -luminet_isp: HFUSE = DF -# 1MHz internal oscillator, slowly rising power -luminet_isp: LFUSE = 62 -# Self-programming enable -luminet_isp: EFUSE = FE -luminet_isp: isp - -# -# Generic build instructions -# -# - -isp: $(TARGET) - $(ISPFUSES) - $(ISPFLASH) - -isp-stk500: $(PROGRAM)_$(TARGET).hex - $(STK500-1) - $(STK500-2) - -%.elf: $(OBJ) - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) - $(SIZE) $@ - -clean: - rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex - -%.lst: %.elf - $(OBJDUMP) -h -S $< > $@ - -%.hex: %.elf - $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O ihex $< $@ - -%.srec: %.elf - $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O srec $< $@ - -%.bin: %.elf - $(OBJCOPY) -j .text -j .data -j .version --set-section-flags .version=alloc,load -O binary $< $@ diff --git a/bootloaders/optiboot/README.TXT b/bootloaders/optiboot/README.TXT deleted file mode 100644 index cd79cd95..00000000 --- a/bootloaders/optiboot/README.TXT +++ /dev/null @@ -1,81 +0,0 @@ -This directory contains the Optiboot small bootloader for AVR -microcontrollers, somewhat modified specifically for the Arduino -environment. - -Optiboot is more fully described here: http://code.google.com/p/optiboot/ -and is the work of Peter Knight (aka Cathedrow), building on work of Jason P -Kyle, Spiff, and Ladyada. Arduino-specific modification are by Bill -Westfield (aka WestfW) - -Arduino-specific issues are tracked as part of the Arduino project -at http://code.google.com/p/arduino - - ------------------------------------------------------------- -Building optiboot for Arduino. - -Production builds of optiboot for Arduino are done on a Mac in "unix mode" -using CrossPack-AVR-20100115. CrossPack tracks WINAVR (for windows), which -is just a package of avr-gcc and related utilities, so similar builds should -work on Windows or Linux systems. - -One of the Arduino-specific changes is modifications to the makefile to -allow building optiboot using only the tools installed as part of the -Arduino environment, or the Arduino source development tree. All three -build procedures should yield identical binaries (.hex files) (although -this may change if compiler versions drift apart between CrossPack and -the Arduino IDE.) - - -Building Optiboot in the Arduino IDE Install. - -Work in the .../hardware/arduino/bootloaders/optiboot/ and use the -"omake " command, which just generates a command that uses -the arduino-included "make" utility with a command like: - make OS=windows ENV=arduino -or make OS=macosx ENV=arduino -On windows, this assumes you're using the windows command shell. If -you're using a cygwin or mingw shell, or have one of those in your -path, the build will probably break due to slash vs backslash issues. -On a Mac, if you have the developer tools installed, you can use the -Apple-supplied version of make. -The makefile uses relative paths ("../../../tools/" and such) to find -the programs it needs, so you need to work in the existing optiboot -directory (or something created at the same "level") for it to work. - - -Building Optiboot in the Arduino Source Development Install. - -In this case, there is no special shell script, and you're assumed to -have "make" installed somewhere in your path. -Build the Arduino source ("ant build") to unpack the tools into the -expected directory. -Work in Arduino/hardware/arduino/bootloaders/optiboot and use - make OS=windows ENV=arduinodev -or make OS=macosx ENV=arduinodev - - -Programming Chips Using the _isp Targets - -The CPU targets have corresponding ISP targets that will actuall -program the bootloader into a chip. "atmega328_isp" for the atmega328, -for example. These will set the fuses and lock bits as appropriate as -well as uploading the bootloader code. - -The makefiles default to using a USB programmer, but you can use -a serial programmer like ArduinoISP by changing the appropriate -variables when you invoke make: - - make ISPTOOL=stk500v1 ISPPORT=/dev/tty.usbserial-A20e1eAN \ - ISPSPEED=-b19200 atmega328_isp - -The "atmega8_isp" target does not currently work, because the mega8 -doesn't have the "extended" fuse that the generic ISP target wants to -pass on to avrdude. You'll need to run avrdude manually. - - -Standard Targets - -I've reduced the pre-built and source-version-controlled targets -(.hex and .lst files included in the git repository) to just the -three basic 16MHz targets: atmega8, atmega16, atmega328. diff --git a/bootloaders/optiboot/boot.h b/bootloaders/optiboot/boot.h deleted file mode 100644 index 71170a5d..00000000 --- a/bootloaders/optiboot/boot.h +++ /dev/null @@ -1,846 +0,0 @@ -/* Modified to use out for SPM access -** Peter Knight, Optiboot project http://optiboot.googlecode.com -** -** Todo: Tidy up -** -** "_short" routines execute 1 cycle faster and use 1 less word of flash -** by using "out" instruction instead of "sts". -** -** Additional elpm variants that trust the value of RAMPZ -*/ - -/* Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007 Eric B. Weddington - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. */ - -#ifndef _AVR_BOOT_H_ -#define _AVR_BOOT_H_ 1 - -/** \file */ -/** \defgroup avr_boot : Bootloader Support Utilities - \code - #include - #include - \endcode - - The macros in this module provide a C language interface to the - bootloader support functionality of certain AVR processors. These - macros are designed to work with all sizes of flash memory. - - Global interrupts are not automatically disabled for these macros. It - is left up to the programmer to do this. See the code example below. - Also see the processor datasheet for caveats on having global interrupts - enabled during writing of the Flash. - - \note Not all AVR processors provide bootloader support. See your - processor datasheet to see if it provides bootloader support. - - \todo From email with Marek: On smaller devices (all except ATmega64/128), - __SPM_REG is in the I/O space, accessible with the shorter "in" and "out" - instructions - since the boot loader has a limited size, this could be an - important optimization. - - \par API Usage Example - The following code shows typical usage of the boot API. - - \code - #include - #include - #include - - void boot_program_page (uint32_t page, uint8_t *buf) - { - uint16_t i; - uint8_t sreg; - - // Disable interrupts. - - sreg = SREG; - cli(); - - eeprom_busy_wait (); - - boot_page_erase (page); - boot_spm_busy_wait (); // Wait until the memory is erased. - - for (i=0; i -#include -#include -#include - -/* Check for SPM Control Register in processor. */ -#if defined (SPMCSR) -# define __SPM_REG SPMCSR -#elif defined (SPMCR) -# define __SPM_REG SPMCR -#else -# error AVR processor does not provide bootloader support! -#endif - - -/* Check for SPM Enable bit. */ -#if defined(SPMEN) -# define __SPM_ENABLE SPMEN -#elif defined(SELFPRGEN) -# define __SPM_ENABLE SELFPRGEN -#else -# error Cannot find SPM Enable bit definition! -#endif - -/** \ingroup avr_boot - \def BOOTLOADER_SECTION - - Used to declare a function or variable to be placed into a - new section called .bootloader. This section and its contents - can then be relocated to any address (such as the bootloader - NRWW area) at link-time. */ - -#define BOOTLOADER_SECTION __attribute__ ((section (".bootloader"))) - -/* Create common bit definitions. */ -#ifdef ASB -#define __COMMON_ASB ASB -#else -#define __COMMON_ASB RWWSB -#endif - -#ifdef ASRE -#define __COMMON_ASRE ASRE -#else -#define __COMMON_ASRE RWWSRE -#endif - -/* Define the bit positions of the Boot Lock Bits. */ - -#define BLB12 5 -#define BLB11 4 -#define BLB02 3 -#define BLB01 2 - -/** \ingroup avr_boot - \def boot_spm_interrupt_enable() - Enable the SPM interrupt. */ - -#define boot_spm_interrupt_enable() (__SPM_REG |= (uint8_t)_BV(SPMIE)) - -/** \ingroup avr_boot - \def boot_spm_interrupt_disable() - Disable the SPM interrupt. */ - -#define boot_spm_interrupt_disable() (__SPM_REG &= (uint8_t)~_BV(SPMIE)) - -/** \ingroup avr_boot - \def boot_is_spm_interrupt() - Check if the SPM interrupt is enabled. */ - -#define boot_is_spm_interrupt() (__SPM_REG & (uint8_t)_BV(SPMIE)) - -/** \ingroup avr_boot - \def boot_rww_busy() - Check if the RWW section is busy. */ - -#define boot_rww_busy() (__SPM_REG & (uint8_t)_BV(__COMMON_ASB)) - -/** \ingroup avr_boot - \def boot_spm_busy() - Check if the SPM instruction is busy. */ - -#define boot_spm_busy() (__SPM_REG & (uint8_t)_BV(__SPM_ENABLE)) - -/** \ingroup avr_boot - \def boot_spm_busy_wait() - Wait while the SPM instruction is busy. */ - -#define boot_spm_busy_wait() do{}while(boot_spm_busy()) - -#define __BOOT_PAGE_ERASE (_BV(__SPM_ENABLE) | _BV(PGERS)) -#define __BOOT_PAGE_WRITE (_BV(__SPM_ENABLE) | _BV(PGWRT)) -#define __BOOT_PAGE_FILL _BV(__SPM_ENABLE) -#define __BOOT_RWW_ENABLE (_BV(__SPM_ENABLE) | _BV(__COMMON_ASRE)) -#define __BOOT_LOCK_BITS_SET (_BV(__SPM_ENABLE) | _BV(BLBSET)) - -#define __boot_page_fill_short(address, data) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r0, %3\n\t" \ - "out %0, %1\n\t" \ - "spm\n\t" \ - "clr r1\n\t" \ - : \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_FILL), \ - "z" ((uint16_t)address), \ - "r" ((uint16_t)data) \ - : "r0" \ - ); \ -})) - -#define __boot_page_fill_normal(address, data) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r0, %3\n\t" \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - "clr r1\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_FILL), \ - "z" ((uint16_t)address), \ - "r" ((uint16_t)data) \ - : "r0" \ - ); \ -})) - -#define __boot_page_fill_alternate(address, data)\ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r0, %3\n\t" \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - ".word 0xffff\n\t" \ - "nop\n\t" \ - "clr r1\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_FILL), \ - "z" ((uint16_t)address), \ - "r" ((uint16_t)data) \ - : "r0" \ - ); \ -})) - -#define __boot_page_fill_extended(address, data) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r0, %4\n\t" \ - "movw r30, %A3\n\t" \ - "sts %1, %C3\n\t" \ - "sts %0, %2\n\t" \ - "spm\n\t" \ - "clr r1\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "i" (_SFR_MEM_ADDR(RAMPZ)), \ - "r" ((uint8_t)__BOOT_PAGE_FILL), \ - "r" ((uint32_t)address), \ - "r" ((uint16_t)data) \ - : "r0", "r30", "r31" \ - ); \ -})) - -#define __boot_page_fill_extended_short(address, data) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r0, %4\n\t" \ - "movw r30, %A3\n\t" \ - "out %1, %C3\n\t" \ - "out %0, %2\n\t" \ - "spm\n\t" \ - "clr r1\n\t" \ - : \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "i" (_SFR_IO_ADDR(RAMPZ)), \ - "r" ((uint8_t)__BOOT_PAGE_FILL), \ - "r" ((uint32_t)address), \ - "r" ((uint16_t)data) \ - : "r0", "r30", "r31" \ - ); \ -})) - -#define __boot_page_erase_short(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "out %0, %1\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_ERASE), \ - "z" ((uint16_t)address) \ - ); \ -})) - - -#define __boot_page_erase_normal(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_ERASE), \ - "z" ((uint16_t)address) \ - ); \ -})) - -#define __boot_page_erase_alternate(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - ".word 0xffff\n\t" \ - "nop\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_ERASE), \ - "z" ((uint16_t)address) \ - ); \ -})) - -#define __boot_page_erase_extended(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r30, %A3\n\t" \ - "sts %1, %C3\n\t" \ - "sts %0, %2\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "i" (_SFR_MEM_ADDR(RAMPZ)), \ - "r" ((uint8_t)__BOOT_PAGE_ERASE), \ - "r" ((uint32_t)address) \ - : "r30", "r31" \ - ); \ -})) -#define __boot_page_erase_extended_short(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r30, %A3\n\t" \ - "out %1, %C3\n\t" \ - "out %0, %2\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "i" (_SFR_IO_ADDR(RAMPZ)), \ - "r" ((uint8_t)__BOOT_PAGE_ERASE), \ - "r" ((uint32_t)address) \ - : "r30", "r31" \ - ); \ -})) - -#define __boot_page_write_short(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "out %0, %1\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_WRITE), \ - "z" ((uint16_t)address) \ - ); \ -})) - -#define __boot_page_write_normal(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_WRITE), \ - "z" ((uint16_t)address) \ - ); \ -})) - -#define __boot_page_write_alternate(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - ".word 0xffff\n\t" \ - "nop\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_PAGE_WRITE), \ - "z" ((uint16_t)address) \ - ); \ -})) - -#define __boot_page_write_extended(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r30, %A3\n\t" \ - "sts %1, %C3\n\t" \ - "sts %0, %2\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "i" (_SFR_MEM_ADDR(RAMPZ)), \ - "r" ((uint8_t)__BOOT_PAGE_WRITE), \ - "r" ((uint32_t)address) \ - : "r30", "r31" \ - ); \ -})) -#define __boot_page_write_extended_short(address) \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "movw r30, %A3\n\t" \ - "out %1, %C3\n\t" \ - "out %0, %2\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "i" (_SFR_IO_ADDR(RAMPZ)), \ - "r" ((uint8_t)__BOOT_PAGE_WRITE), \ - "r" ((uint32_t)address) \ - : "r30", "r31" \ - ); \ -})) - -#define __boot_rww_enable_short() \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "out %0, %1\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_RWW_ENABLE) \ - ); \ -})) - -#define __boot_rww_enable() \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_RWW_ENABLE) \ - ); \ -})) - -#define __boot_rww_enable_alternate() \ -(__extension__({ \ - __asm__ __volatile__ \ - ( \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - ".word 0xffff\n\t" \ - "nop\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_RWW_ENABLE) \ - ); \ -})) - -/* From the mega16/mega128 data sheets (maybe others): - - Bits by SPM To set the Boot Loader Lock bits, write the desired data to - R0, write "X0001001" to SPMCR and execute SPM within four clock cycles - after writing SPMCR. The only accessible Lock bits are the Boot Lock bits - that may prevent the Application and Boot Loader section from any - software update by the MCU. - - If bits 5..2 in R0 are cleared (zero), the corresponding Boot Lock bit - will be programmed if an SPM instruction is executed within four cycles - after BLBSET and SPMEN (or SELFPRGEN) are set in SPMCR. The Z-pointer is - don't care during this operation, but for future compatibility it is - recommended to load the Z-pointer with $0001 (same as used for reading the - Lock bits). For future compatibility It is also recommended to set bits 7, - 6, 1, and 0 in R0 to 1 when writing the Lock bits. When programming the - Lock bits the entire Flash can be read during the operation. */ - -#define __boot_lock_bits_set_short(lock_bits) \ -(__extension__({ \ - uint8_t value = (uint8_t)(~(lock_bits)); \ - __asm__ __volatile__ \ - ( \ - "ldi r30, 1\n\t" \ - "ldi r31, 0\n\t" \ - "mov r0, %2\n\t" \ - "out %0, %1\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_LOCK_BITS_SET), \ - "r" (value) \ - : "r0", "r30", "r31" \ - ); \ -})) - -#define __boot_lock_bits_set(lock_bits) \ -(__extension__({ \ - uint8_t value = (uint8_t)(~(lock_bits)); \ - __asm__ __volatile__ \ - ( \ - "ldi r30, 1\n\t" \ - "ldi r31, 0\n\t" \ - "mov r0, %2\n\t" \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_LOCK_BITS_SET), \ - "r" (value) \ - : "r0", "r30", "r31" \ - ); \ -})) - -#define __boot_lock_bits_set_alternate(lock_bits) \ -(__extension__({ \ - uint8_t value = (uint8_t)(~(lock_bits)); \ - __asm__ __volatile__ \ - ( \ - "ldi r30, 1\n\t" \ - "ldi r31, 0\n\t" \ - "mov r0, %2\n\t" \ - "sts %0, %1\n\t" \ - "spm\n\t" \ - ".word 0xffff\n\t" \ - "nop\n\t" \ - : \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_LOCK_BITS_SET), \ - "r" (value) \ - : "r0", "r30", "r31" \ - ); \ -})) - -/* - Reading lock and fuse bits: - - Similarly to writing the lock bits above, set BLBSET and SPMEN (or - SELFPRGEN) bits in __SPMREG, and then (within four clock cycles) issue an - LPM instruction. - - Z address: contents: - 0x0000 low fuse bits - 0x0001 lock bits - 0x0002 extended fuse bits - 0x0003 high fuse bits - - Sounds confusing, doesn't it? - - Unlike the macros in pgmspace.h, no need to care for non-enhanced - cores here as these old cores do not provide SPM support anyway. - */ - -/** \ingroup avr_boot - \def GET_LOW_FUSE_BITS - address to read the low fuse bits, using boot_lock_fuse_bits_get - */ -#define GET_LOW_FUSE_BITS (0x0000) -/** \ingroup avr_boot - \def GET_LOCK_BITS - address to read the lock bits, using boot_lock_fuse_bits_get - */ -#define GET_LOCK_BITS (0x0001) -/** \ingroup avr_boot - \def GET_EXTENDED_FUSE_BITS - address to read the extended fuse bits, using boot_lock_fuse_bits_get - */ -#define GET_EXTENDED_FUSE_BITS (0x0002) -/** \ingroup avr_boot - \def GET_HIGH_FUSE_BITS - address to read the high fuse bits, using boot_lock_fuse_bits_get - */ -#define GET_HIGH_FUSE_BITS (0x0003) - -/** \ingroup avr_boot - \def boot_lock_fuse_bits_get(address) - - Read the lock or fuse bits at \c address. - - Parameter \c address can be any of GET_LOW_FUSE_BITS, - GET_LOCK_BITS, GET_EXTENDED_FUSE_BITS, or GET_HIGH_FUSE_BITS. - - \note The lock and fuse bits returned are the physical values, - i.e. a bit returned as 0 means the corresponding fuse or lock bit - is programmed. - */ -#define boot_lock_fuse_bits_get_short(address) \ -(__extension__({ \ - uint8_t __result; \ - __asm__ __volatile__ \ - ( \ - "ldi r30, %3\n\t" \ - "ldi r31, 0\n\t" \ - "out %1, %2\n\t" \ - "lpm %0, Z\n\t" \ - : "=r" (__result) \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_LOCK_BITS_SET), \ - "M" (address) \ - : "r0", "r30", "r31" \ - ); \ - __result; \ -})) - -#define boot_lock_fuse_bits_get(address) \ -(__extension__({ \ - uint8_t __result; \ - __asm__ __volatile__ \ - ( \ - "ldi r30, %3\n\t" \ - "ldi r31, 0\n\t" \ - "sts %1, %2\n\t" \ - "lpm %0, Z\n\t" \ - : "=r" (__result) \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t)__BOOT_LOCK_BITS_SET), \ - "M" (address) \ - : "r0", "r30", "r31" \ - ); \ - __result; \ -})) - -/** \ingroup avr_boot - \def boot_signature_byte_get(address) - - Read the Signature Row byte at \c address. For some MCU types, - this function can also retrieve the factory-stored oscillator - calibration bytes. - - Parameter \c address can be 0-0x1f as documented by the datasheet. - \note The values are MCU type dependent. -*/ - -#define __BOOT_SIGROW_READ (_BV(__SPM_ENABLE) | _BV(SIGRD)) - -#define boot_signature_byte_get_short(addr) \ -(__extension__({ \ - uint16_t __addr16 = (uint16_t)(addr); \ - uint8_t __result; \ - __asm__ __volatile__ \ - ( \ - "out %1, %2\n\t" \ - "lpm %0, Z" "\n\t" \ - : "=r" (__result) \ - : "i" (_SFR_IO_ADDR(__SPM_REG)), \ - "r" ((uint8_t) __BOOT_SIGROW_READ), \ - "z" (__addr16) \ - ); \ - __result; \ -})) - -#define boot_signature_byte_get(addr) \ -(__extension__({ \ - uint16_t __addr16 = (uint16_t)(addr); \ - uint8_t __result; \ - __asm__ __volatile__ \ - ( \ - "sts %1, %2\n\t" \ - "lpm %0, Z" "\n\t" \ - : "=r" (__result) \ - : "i" (_SFR_MEM_ADDR(__SPM_REG)), \ - "r" ((uint8_t) __BOOT_SIGROW_READ), \ - "z" (__addr16) \ - ); \ - __result; \ -})) - -/** \ingroup avr_boot - \def boot_page_fill(address, data) - - Fill the bootloader temporary page buffer for flash - address with data word. - - \note The address is a byte address. The data is a word. The AVR - writes data to the buffer a word at a time, but addresses the buffer - per byte! So, increment your address by 2 between calls, and send 2 - data bytes in a word format! The LSB of the data is written to the lower - address; the MSB of the data is written to the higher address.*/ - -/** \ingroup avr_boot - \def boot_page_erase(address) - - Erase the flash page that contains address. - - \note address is a byte address in flash, not a word address. */ - -/** \ingroup avr_boot - \def boot_page_write(address) - - Write the bootloader temporary page buffer - to flash page that contains address. - - \note address is a byte address in flash, not a word address. */ - -/** \ingroup avr_boot - \def boot_rww_enable() - - Enable the Read-While-Write memory section. */ - -/** \ingroup avr_boot - \def boot_lock_bits_set(lock_bits) - - Set the bootloader lock bits. - - \param lock_bits A mask of which Boot Loader Lock Bits to set. - - \note In this context, a 'set bit' will be written to a zero value. - Note also that only BLBxx bits can be programmed by this command. - - For example, to disallow the SPM instruction from writing to the Boot - Loader memory section of flash, you would use this macro as such: - - \code - boot_lock_bits_set (_BV (BLB11)); - \endcode - - \note Like any lock bits, the Boot Loader Lock Bits, once set, - cannot be cleared again except by a chip erase which will in turn - also erase the boot loader itself. */ - -/* Normal versions of the macros use 16-bit addresses. - Extended versions of the macros use 32-bit addresses. - Alternate versions of the macros use 16-bit addresses and require special - instruction sequences after LPM. - - FLASHEND is defined in the ioXXXX.h file. - USHRT_MAX is defined in . */ - -#if defined(__AVR_ATmega161__) || defined(__AVR_ATmega163__) \ - || defined(__AVR_ATmega323__) - -/* Alternate: ATmega161/163/323 and 16 bit address */ -#define boot_page_fill(address, data) __boot_page_fill_alternate(address, data) -#define boot_page_erase(address) __boot_page_erase_alternate(address) -#define boot_page_write(address) __boot_page_write_alternate(address) -#define boot_rww_enable() __boot_rww_enable_alternate() -#define boot_lock_bits_set(lock_bits) __boot_lock_bits_set_alternate(lock_bits) - -#elif (FLASHEND > USHRT_MAX) - -/* Extended: >16 bit address */ -#define boot_page_fill(address, data) __boot_page_fill_extended_short(address, data) -#define boot_page_erase(address) __boot_page_erase_extended_short(address) -#define boot_page_write(address) __boot_page_write_extended_short(address) -#define boot_rww_enable() __boot_rww_enable_short() -#define boot_lock_bits_set(lock_bits) __boot_lock_bits_set_short(lock_bits) - -#else - -/* Normal: 16 bit address */ -#define boot_page_fill(address, data) __boot_page_fill_short(address, data) -#define boot_page_erase(address) __boot_page_erase_short(address) -#define boot_page_write(address) __boot_page_write_short(address) -#define boot_rww_enable() __boot_rww_enable_short() -#define boot_lock_bits_set(lock_bits) __boot_lock_bits_set_short(lock_bits) - -#endif - -/** \ingroup avr_boot - - Same as boot_page_fill() except it waits for eeprom and spm operations to - complete before filling the page. */ - -#define boot_page_fill_safe(address, data) \ -do { \ - boot_spm_busy_wait(); \ - eeprom_busy_wait(); \ - boot_page_fill(address, data); \ -} while (0) - -/** \ingroup avr_boot - - Same as boot_page_erase() except it waits for eeprom and spm operations to - complete before erasing the page. */ - -#define boot_page_erase_safe(address) \ -do { \ - boot_spm_busy_wait(); \ - eeprom_busy_wait(); \ - boot_page_erase (address); \ -} while (0) - -/** \ingroup avr_boot - - Same as boot_page_write() except it waits for eeprom and spm operations to - complete before writing the page. */ - -#define boot_page_write_safe(address) \ -do { \ - boot_spm_busy_wait(); \ - eeprom_busy_wait(); \ - boot_page_write (address); \ -} while (0) - -/** \ingroup avr_boot - - Same as boot_rww_enable() except waits for eeprom and spm operations to - complete before enabling the RWW mameory. */ - -#define boot_rww_enable_safe() \ -do { \ - boot_spm_busy_wait(); \ - eeprom_busy_wait(); \ - boot_rww_enable(); \ -} while (0) - -/** \ingroup avr_boot - - Same as boot_lock_bits_set() except waits for eeprom and spm operations to - complete before setting the lock bits. */ - -#define boot_lock_bits_set_safe(lock_bits) \ -do { \ - boot_spm_busy_wait(); \ - eeprom_busy_wait(); \ - boot_lock_bits_set (lock_bits); \ -} while (0) - -#endif /* _AVR_BOOT_H_ */ diff --git a/bootloaders/optiboot/makeall b/bootloaders/optiboot/makeall deleted file mode 100755 index f076bc7f..00000000 --- a/bootloaders/optiboot/makeall +++ /dev/null @@ -1,20 +0,0 @@ -#!/bin/bash -make clean -# -# The "big three" standard bootloaders. -make atmega8 -make atmega168 -make atmega328 -# -# additional buildable platforms of -# somewhat questionable support level -make lilypad -make lilypad_resonator -make pro8 -make pro16 -make pro20 -make atmega328_pro8 -make sanguino -make mega -make atmega88 -make luminet diff --git a/bootloaders/optiboot/omake b/bootloaders/optiboot/omake deleted file mode 100644 index cc7c6bc2..00000000 --- a/bootloaders/optiboot/omake +++ /dev/null @@ -1,2 +0,0 @@ -echo ../../../tools/avr/bin/make OS=macosx ENV=arduino $* -../../../tools/avr/bin/make OS=macosx ENV=arduino $* diff --git a/bootloaders/optiboot/omake.bat b/bootloaders/optiboot/omake.bat deleted file mode 100644 index f6815dac..00000000 --- a/bootloaders/optiboot/omake.bat +++ /dev/null @@ -1 +0,0 @@ -..\..\..\tools\avr\utils\bin\make OS=windows ENV=arduino %* diff --git a/bootloaders/optiboot/optiboot.c b/bootloaders/optiboot/optiboot.c deleted file mode 100644 index bd3a1db9..00000000 --- a/bootloaders/optiboot/optiboot.c +++ /dev/null @@ -1,672 +0,0 @@ -/**********************************************************/ -/* Optiboot bootloader for Arduino */ -/* */ -/* http://optiboot.googlecode.com */ -/* */ -/* Arduino-maintained version : See README.TXT */ -/* http://code.google.com/p/arduino/ */ -/* */ -/* Heavily optimised bootloader that is faster and */ -/* smaller than the Arduino standard bootloader */ -/* */ -/* Enhancements: */ -/* Fits in 512 bytes, saving 1.5K of code space */ -/* Background page erasing speeds up programming */ -/* Higher baud rate speeds up programming */ -/* Written almost entirely in C */ -/* Customisable timeout with accurate timeconstant */ -/* Optional virtual UART. No hardware UART required. */ -/* Optional virtual boot partition for devices without. */ -/* */ -/* What you lose: */ -/* Implements a skeleton STK500 protocol which is */ -/* missing several features including EEPROM */ -/* programming and non-page-aligned writes */ -/* High baud rate breaks compatibility with standard */ -/* Arduino flash settings */ -/* */ -/* Fully supported: */ -/* ATmega168 based devices (Diecimila etc) */ -/* ATmega328P based devices (Duemilanove etc) */ -/* */ -/* Alpha test */ -/* ATmega1280 based devices (Arduino Mega) */ -/* */ -/* Work in progress: */ -/* ATmega644P based devices (Sanguino) */ -/* ATtiny84 based devices (Luminet) */ -/* */ -/* Does not support: */ -/* USB based devices (eg. Teensy) */ -/* */ -/* Assumptions: */ -/* The code makes several assumptions that reduce the */ -/* code size. They are all true after a hardware reset, */ -/* but may not be true if the bootloader is called by */ -/* other means or on other hardware. */ -/* No interrupts can occur */ -/* UART and Timer 1 are set to their reset state */ -/* SP points to RAMEND */ -/* */ -/* Code builds on code, libraries and optimisations from: */ -/* stk500boot.c by Jason P. Kyle */ -/* Arduino bootloader http://www.arduino.cc */ -/* Spiff's 1K bootloader http://spiffie.org/know/arduino_1k_bootloader/bootloader.shtml */ -/* avr-libc project http://nongnu.org/avr-libc */ -/* Adaboot http://www.ladyada.net/library/arduino/bootloader.html */ -/* AVR305 Atmel Application Note */ -/* */ -/* This program is free software; you can redistribute it */ -/* and/or modify it under the terms of the GNU General */ -/* Public License as published by the Free Software */ -/* Foundation; either version 2 of the License, or */ -/* (at your option) any later version. */ -/* */ -/* This program is distributed in the hope that it will */ -/* be useful, but WITHOUT ANY WARRANTY; without even the */ -/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ -/* PARTICULAR PURPOSE. See the GNU General Public */ -/* License for more details. */ -/* */ -/* You should have received a copy of the GNU General */ -/* Public License along with this program; if not, write */ -/* to the Free Software Foundation, Inc., */ -/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* */ -/* Licence can be viewed at */ -/* http://www.fsf.org/licenses/gpl.txt */ -/* */ -/**********************************************************/ - - -/**********************************************************/ -/* */ -/* Optional defines: */ -/* */ -/**********************************************************/ -/* */ -/* BIG_BOOT: */ -/* Build a 1k bootloader, not 512 bytes. This turns on */ -/* extra functionality. */ -/* */ -/* BAUD_RATE: */ -/* Set bootloader baud rate. */ -/* */ -/* LUDICROUS_SPEED: */ -/* 230400 baud :-) */ -/* */ -/* SOFT_UART: */ -/* Use AVR305 soft-UART instead of hardware UART. */ -/* */ -/* LED_START_FLASHES: */ -/* Number of LED flashes on bootup. */ -/* */ -/* LED_DATA_FLASH: */ -/* Flash LED when transferring data. For boards without */ -/* TX or RX LEDs, or for people who like blinky lights. */ -/* */ -/* SUPPORT_EEPROM: */ -/* Support reading and writing from EEPROM. This is not */ -/* used by Arduino, so off by default. */ -/* */ -/* TIMEOUT_MS: */ -/* Bootloader timeout period, in milliseconds. */ -/* 500,1000,2000,4000,8000 supported. */ -/* */ -/**********************************************************/ - -/**********************************************************/ -/* Version Numbers! */ -/* */ -/* Arduino Optiboot now includes this Version number in */ -/* the source and object code. */ -/* */ -/* Version 3 was released as zip from the optiboot */ -/* repository and was distributed with Arduino 0022. */ -/* Version 4 starts with the arduino repository commit */ -/* that brought the arduino repository up-to-date with */ -/* the optiboot source tree changes since v3. */ -/* */ -/**********************************************************/ - -/**********************************************************/ -/* Edit History: */ -/* */ -/* 4.4 WestfW: add initialization of address to keep */ -/* the compiler happy. Change SC'ed targets. */ -/* Return the SW version via READ PARAM */ -/* 4.3 WestfW: catch framing errors in getch(), so that */ -/* AVRISP works without HW kludges. */ -/* http://code.google.com/p/arduino/issues/detail?id=368n*/ -/* 4.2 WestfW: reduce code size, fix timeouts, change */ -/* verifySpace to use WDT instead of appstart */ -/* 4.1 WestfW: put version number in binary. */ -/**********************************************************/ - -#define OPTIBOOT_MAJVER 4 -#define OPTIBOOT_MINVER 4 - -#define MAKESTR(a) #a -#define MAKEVER(a, b) MAKESTR(a*256+b) - -asm(" .section .version\n" - "optiboot_version: .word " MAKEVER(OPTIBOOT_MAJVER, OPTIBOOT_MINVER) "\n" - " .section .text\n"); - -#include -#include -#include - -// uses sts instructions, but this version uses out instructions -// This saves cycles and program memory. -#include "boot.h" - - -// We don't use as those routines have interrupt overhead we don't need. - -#include "pin_defs.h" -#include "stk500.h" - -#ifndef LED_START_FLASHES -#define LED_START_FLASHES 0 -#endif - -#ifdef LUDICROUS_SPEED -#define BAUD_RATE 230400L -#endif - -/* set the UART baud rate defaults */ -#ifndef BAUD_RATE -#if F_CPU >= 8000000L -#define BAUD_RATE 115200L // Highest rate Avrdude win32 will support -#elsif F_CPU >= 1000000L -#define BAUD_RATE 9600L // 19200 also supported, but with significant error -#elsif F_CPU >= 128000L -#define BAUD_RATE 4800L // Good for 128kHz internal RC -#else -#define BAUD_RATE 1200L // Good even at 32768Hz -#endif -#endif - -/* Switch in soft UART for hard baud rates */ -#if (F_CPU/BAUD_RATE) > 280 // > 57600 for 16MHz -#ifndef SOFT_UART -#define SOFT_UART -#endif -#endif - -/* Watchdog settings */ -#define WATCHDOG_OFF (0) -#define WATCHDOG_16MS (_BV(WDE)) -#define WATCHDOG_32MS (_BV(WDP0) | _BV(WDE)) -#define WATCHDOG_64MS (_BV(WDP1) | _BV(WDE)) -#define WATCHDOG_125MS (_BV(WDP1) | _BV(WDP0) | _BV(WDE)) -#define WATCHDOG_250MS (_BV(WDP2) | _BV(WDE)) -#define WATCHDOG_500MS (_BV(WDP2) | _BV(WDP0) | _BV(WDE)) -#define WATCHDOG_1S (_BV(WDP2) | _BV(WDP1) | _BV(WDE)) -#define WATCHDOG_2S (_BV(WDP2) | _BV(WDP1) | _BV(WDP0) | _BV(WDE)) -#ifndef __AVR_ATmega8__ -#define WATCHDOG_4S (_BV(WDP3) | _BV(WDE)) -#define WATCHDOG_8S (_BV(WDP3) | _BV(WDP0) | _BV(WDE)) -#endif - -/* Function Prototypes */ -/* The main function is in init9, which removes the interrupt vector table */ -/* we don't need. It is also 'naked', which means the compiler does not */ -/* generate any entry or exit code itself. */ -int main(void) __attribute__ ((naked)) __attribute__ ((section (".init9"))); -void putch(char); -uint8_t getch(void); -static inline void getNch(uint8_t); /* "static inline" is a compiler hint to reduce code size */ -void verifySpace(); -static inline void flash_led(uint8_t); -uint8_t getLen(); -static inline void watchdogReset(); -void watchdogConfig(uint8_t x); -#ifdef SOFT_UART -void uartDelay() __attribute__ ((naked)); -#endif -void appStart() __attribute__ ((naked)); - -#if defined(__AVR_ATmega168__) -#define RAMSTART (0x100) -#define NRWWSTART (0x3800) -#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) -#define RAMSTART (0x100) -#define NRWWSTART (0x7000) -#elif defined (__AVR_ATmega644P__) -#define RAMSTART (0x100) -#define NRWWSTART (0xE000) -#elif defined(__AVR_ATtiny84__) -#define RAMSTART (0x100) -#define NRWWSTART (0x0000) -#elif defined(__AVR_ATmega1280__) -#define RAMSTART (0x200) -#define NRWWSTART (0xE000) -#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__) -#define RAMSTART (0x100) -#define NRWWSTART (0x1800) -#endif - -/* C zero initialises all global variables. However, that requires */ -/* These definitions are NOT zero initialised, but that doesn't matter */ -/* This allows us to drop the zero init code, saving us memory */ -#define buff ((uint8_t*)(RAMSTART)) -#ifdef VIRTUAL_BOOT_PARTITION -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - uint8_t ch; - - /* - * Making these local and in registers prevents the need for initializing - * them, and also saves space because code no longer stores to memory. - * (initializing address keeps the compiler happy, but isn't really - * necessary, and uses 4 bytes of flash.) - */ - register uint16_t address = 0; - register uint8_t length; - - // After the zero init loop, this is the first code to run. - // - // This code makes the following assumptions: - // No interrupts will execute - // SP points to RAMEND - // r1 contains zero - // - // If not, uncomment the following instructions: - // cli(); - asm volatile ("clr __zero_reg__"); -#ifdef __AVR_ATmega8__ - SP=RAMEND; // This is done by hardware reset -#endif - - // Adaboot no-wait mod - ch = MCUSR; - MCUSR = 0; - if (!(ch & _BV(EXTRF))) appStart(); - -#if LED_START_FLASHES > 0 - // Set up Timer 1 for timeout counter - TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 -#endif -#ifndef SOFT_UART -#ifdef __AVR_ATmega8__ - UCSRA = _BV(U2X); //Double speed mode USART - UCSRB = _BV(RXEN) | _BV(TXEN); // enable Rx & Tx - UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0); // config USART; 8N1 - UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); -#else - UCSR0A = _BV(U2X0); //Double speed mode USART0 - UCSR0B = _BV(RXEN0) | _BV(TXEN0); - UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); - UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); -#endif -#endif - - // Set up watchdog to trigger after 500ms - watchdogConfig(WATCHDOG_1S); - - /* Set LED pin as output */ - LED_DDR |= _BV(LED); - -#ifdef SOFT_UART - /* Set TX pin as output */ - UART_DDR |= _BV(UART_TX_BIT); -#endif - -#if LED_START_FLASHES > 0 - /* Flash onboard LED to signal entering of bootloader */ - flash_led(LED_START_FLASHES * 2); -#endif - - /* Forever loop */ - for (;;) { - /* get character from UART */ - ch = getch(); - - if(ch == STK_GET_PARAMETER) { - unsigned char which = getch(); - verifySpace(); - if (which == 0x82) { - /* - * Send optiboot version as "minor SW version" - */ - putch(OPTIBOOT_MINVER); - } else if (which == 0x81) { - putch(OPTIBOOT_MAJVER); - } else { - /* - * GET PARAMETER returns a generic 0x03 reply for - * other parameters - enough to keep Avrdude happy - */ - putch(0x03); - } - } - else if(ch == STK_SET_DEVICE) { - // SET DEVICE is ignored - getNch(20); - } - else if(ch == STK_SET_DEVICE_EXT) { - // SET DEVICE EXT is ignored - getNch(5); - } - else if(ch == STK_LOAD_ADDRESS) { - // LOAD ADDRESS - uint16_t newAddress; - newAddress = getch(); - newAddress = (newAddress & 0xff) | (getch() << 8); -#ifdef RAMPZ - // Transfer top bit to RAMPZ - RAMPZ = (newAddress & 0x8000) ? 1 : 0; -#endif - newAddress += newAddress; // Convert from word address to byte address - address = newAddress; - verifySpace(); - } - else if(ch == STK_UNIVERSAL) { - // UNIVERSAL command is ignored - getNch(4); - putch(0x00); - } - /* Write memory, length is big endian and is in bytes */ - else if(ch == STK_PROG_PAGE) { - // PROGRAM PAGE - we support flash programming only, not EEPROM - uint8_t *bufPtr; - uint16_t addrPtr; - - getch(); /* getlen() */ - length = getch(); - getch(); - - // If we are in RWW section, immediately start page erase - if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - - // While that is going on, read in page contents - bufPtr = buff; - do *bufPtr++ = getch(); - while (--length); - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - - // Read command terminator, start reply - verifySpace(); - - // If only a partial page is to be programmed, the erase might not be complete. - // So check that here - boot_spm_busy_wait(); - -#ifdef VIRTUAL_BOOT_PARTITION - if ((uint16_t)(void*)address == 0) { - // This is the reset vector page. We need to live-patch the code so the - // bootloader runs. - // - // Move RESET vector to WDT vector - uint16_t vect = buff[0] | (buff[1]<<8); - rstVect = vect; - wdtVect = buff[8] | (buff[9]<<8); - vect -= 4; // Instruction is a relative jump (rjmp), so recalculate. - buff[8] = vect & 0xff; - buff[9] = vect >> 8; - - // Add jump to bootloader at RESET vector - buff[0] = 0x7f; - buff[1] = 0xce; // rjmp 0x1d00 instruction - } -#endif - - // Copy buffer into programming buffer - bufPtr = buff; - addrPtr = (uint16_t)(void*)address; - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - addrPtr += 2; - } while (--ch); - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - boot_spm_busy_wait(); - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); -#endif - - } - /* Read memory block mode, length is big endian. */ - else if(ch == STK_READ_PAGE) { - // READ PAGE - we only read flash - getch(); /* getlen() */ - length = getch(); - getch(); - - verifySpace(); -#ifdef VIRTUAL_BOOT_PARTITION - do { - // Undo vector patch in bottom page so verify passes - if (address == 0) ch=rstVect & 0xff; - else if (address == 1) ch=rstVect >> 8; - else if (address == 8) ch=wdtVect & 0xff; - else if (address == 9) ch=wdtVect >> 8; - else ch = pgm_read_byte_near(address); - address++; - putch(ch); - } while (--length); -#else -#ifdef __AVR_ATmega1280__ -// do putch(pgm_read_byte_near(address++)); -// while (--length); - do { - uint8_t result; - __asm__ ("elpm %0,Z\n":"=r"(result):"z"(address)); - putch(result); - address++; - } - while (--length); -#else - do putch(pgm_read_byte_near(address++)); - while (--length); -#endif -#endif - } - - /* Get device signature bytes */ - else if(ch == STK_READ_SIGN) { - // READ SIGN - return what Avrdude wants to hear - verifySpace(); - putch(SIGNATURE_0); - putch(SIGNATURE_1); - putch(SIGNATURE_2); - } - else if (ch == 'Q') { - // Adaboot no-wait mod - watchdogConfig(WATCHDOG_16MS); - verifySpace(); - } - else { - // This covers the response to commands like STK_ENTER_PROGMODE - verifySpace(); - } - putch(STK_OK); - } -} - -void putch(char ch) { -#ifndef SOFT_UART - while (!(UCSR0A & _BV(UDRE0))); - UDR0 = ch; -#else - __asm__ __volatile__ ( - " com %[ch]\n" // ones complement, carry set - " sec\n" - "1: brcc 2f\n" - " cbi %[uartPort],%[uartBit]\n" - " rjmp 3f\n" - "2: sbi %[uartPort],%[uartBit]\n" - " nop\n" - "3: rcall uartDelay\n" - " rcall uartDelay\n" - " lsr %[ch]\n" - " dec %[bitcnt]\n" - " brne 1b\n" - : - : - [bitcnt] "d" (10), - [ch] "r" (ch), - [uartPort] "I" (_SFR_IO_ADDR(UART_PORT)), - [uartBit] "I" (UART_TX_BIT) - : - "r25" - ); -#endif -} - -uint8_t getch(void) { - uint8_t ch; - -#ifdef LED_DATA_FLASH -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); -#endif -#endif - -#ifdef SOFT_UART - __asm__ __volatile__ ( - "1: sbic %[uartPin],%[uartBit]\n" // Wait for start edge - " rjmp 1b\n" - " rcall uartDelay\n" // Get to middle of start bit - "2: rcall uartDelay\n" // Wait 1 bit period - " rcall uartDelay\n" // Wait 1 bit period - " clc\n" - " sbic %[uartPin],%[uartBit]\n" - " sec\n" - " dec %[bitCnt]\n" - " breq 3f\n" - " ror %[ch]\n" - " rjmp 2b\n" - "3:\n" - : - [ch] "=r" (ch) - : - [bitCnt] "d" (9), - [uartPin] "I" (_SFR_IO_ADDR(UART_PIN)), - [uartBit] "I" (UART_RX_BIT) - : - "r25" -); -#else - while(!(UCSR0A & _BV(RXC0))) - ; - if (!(UCSR0A & _BV(FE0))) { - /* - * A Framing Error indicates (probably) that something is talking - * to us at the wrong bit rate. Assume that this is because it - * expects to be talking to the application, and DON'T reset the - * watchdog. This should cause the bootloader to abort and run - * the application "soon", if it keeps happening. (Note that we - * don't care that an invalid char is returned...) - */ - watchdogReset(); - } - - ch = UDR0; -#endif - -#ifdef LED_DATA_FLASH -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); -#endif -#endif - - return ch; -} - -#ifdef SOFT_UART -// AVR350 equation: #define UART_B_VALUE (((F_CPU/BAUD_RATE)-23)/6) -// Adding 3 to numerator simulates nearest rounding for more accurate baud rates -#define UART_B_VALUE (((F_CPU/BAUD_RATE)-20)/6) -#if UART_B_VALUE > 255 -#error Baud rate too slow for soft UART -#endif - -void uartDelay() { - __asm__ __volatile__ ( - "ldi r25,%[count]\n" - "1:dec r25\n" - "brne 1b\n" - "ret\n" - ::[count] "M" (UART_B_VALUE) - ); -} -#endif - -void getNch(uint8_t count) { - do getch(); while (--count); - verifySpace(); -} - -void verifySpace() { - if (getch() != CRC_EOP) { - watchdogConfig(WATCHDOG_16MS); // shorten WD timeout - while (1) // and busy-loop so that WD causes - ; // a reset and app start. - } - putch(STK_INSYNC); -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - TIFR1 = _BV(TOV1); - while(!(TIFR1 & _BV(TOV1))); -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); -#endif - watchdogReset(); - } while (--count); -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - "wdr\n" - ); -} - -void watchdogConfig(uint8_t x) { - WDTCSR = _BV(WDCE) | _BV(WDE); - WDTCSR = x; -} - -void appStart() { - watchdogConfig(WATCHDOG_OFF); - __asm__ __volatile__ ( -#ifdef VIRTUAL_BOOT_PARTITION - // Jump to WDT vector - "ldi r30,4\n" - "clr r31\n" -#else - // Jump to RST vector - "clr r30\n" - "clr r31\n" -#endif - "ijmp\n" - ); -} diff --git a/bootloaders/optiboot/optiboot_atmega168.hex b/bootloaders/optiboot/optiboot_atmega168.hex deleted file mode 100644 index c2f2b5b5..00000000 --- a/bootloaders/optiboot/optiboot_atmega168.hex +++ /dev/null @@ -1,35 +0,0 @@ -:103E0000112484B714BE81FFF0D085E08093810037 -:103E100082E08093C00088E18093C10086E08093B7 -:103E2000C20080E18093C4008EE0C9D0259A86E06C -:103E300020E33CEF91E0309385002093840096BB13 -:103E4000B09BFECF1D9AA8958150A9F7CC24DD2404 -:103E500088248394B5E0AB2EA1E19A2EF3E0BF2E27 -:103E6000A2D0813461F49FD0082FAFD0023811F076 -:103E7000013811F484E001C083E08DD089C0823420 -:103E800011F484E103C0853419F485E0A6D080C024 -:103E9000853579F488D0E82EFF2485D0082F10E0EE -:103EA000102F00270E291F29000F111F8ED0680127 -:103EB0006FC0863521F484E090D080E0DECF843678 -:103EC00009F040C070D06FD0082F6DD080E0C816C8 -:103ED00088E3D80618F4F601B7BEE895C0E0D1E053 -:103EE00062D089930C17E1F7F0E0CF16F8E3DF0614 -:103EF00018F0F601B7BEE89568D007B600FCFDCF14 -:103F0000A601A0E0B1E02C9130E011968C911197C0 -:103F100090E0982F8827822B932B1296FA010C01A0 -:103F200087BEE89511244E5F5F4FF1E0A038BF07D0 -:103F300051F7F601A7BEE89507B600FCFDCF97BE86 -:103F4000E89526C08437B1F42ED02DD0F82E2BD092 -:103F50003CD0F601EF2C8F010F5F1F4F84911BD0D7 -:103F6000EA94F801C1F70894C11CD11CFA94CF0C53 -:103F7000D11C0EC0853739F428D08EE10CD084E9ED -:103F80000AD086E07ACF813511F488E018D01DD0B0 -:103F900080E101D065CF982F8091C00085FFFCCFD4 -:103FA0009093C60008958091C00087FFFCCF809158 -:103FB000C00084FD01C0A8958091C6000895E0E688 -:103FC000F0E098E1908380830895EDDF803219F06E -:103FD00088E0F5DFFFCF84E1DECF1F93182FE3DF0A -:103FE0001150E9F7F2DF1F91089580E0E8DFEE2736 -:043FF000FF2709940A -:023FFE000404B9 -:0400000300003E00BB -:00000001FF diff --git a/bootloaders/optiboot/optiboot_atmega168.lst b/bootloaders/optiboot/optiboot_atmega168.lst deleted file mode 100644 index 06316dbb..00000000 --- a/bootloaders/optiboot/optiboot_atmega168.lst +++ /dev/null @@ -1,598 +0,0 @@ - -optiboot_atmega168.elf: file format elf32-avr - -Sections: -Idx Name Size VMA LMA File off Algn - 0 .text 000001f4 00003e00 00003e00 00000054 2**1 - CONTENTS, ALLOC, LOAD, READONLY, CODE - 1 .version 00000002 00003ffe 00003ffe 00000248 2**0 - CONTENTS, READONLY - 2 .debug_aranges 00000028 00000000 00000000 0000024a 2**0 - CONTENTS, READONLY, DEBUGGING - 3 .debug_pubnames 0000005f 00000000 00000000 00000272 2**0 - CONTENTS, READONLY, DEBUGGING - 4 .debug_info 000002a8 00000000 00000000 000002d1 2**0 - CONTENTS, READONLY, DEBUGGING - 5 .debug_abbrev 00000178 00000000 00000000 00000579 2**0 - CONTENTS, READONLY, DEBUGGING - 6 .debug_line 00000488 00000000 00000000 000006f1 2**0 - CONTENTS, READONLY, DEBUGGING - 7 .debug_frame 00000080 00000000 00000000 00000b7c 2**2 - CONTENTS, READONLY, DEBUGGING - 8 .debug_str 0000014f 00000000 00000000 00000bfc 2**0 - CONTENTS, READONLY, DEBUGGING - 9 .debug_loc 000002d8 00000000 00000000 00000d4b 2**0 - CONTENTS, READONLY, DEBUGGING - 10 .debug_ranges 00000078 00000000 00000000 00001023 2**0 - CONTENTS, READONLY, DEBUGGING - -Disassembly of section .text: - -00003e00
: -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 3e00: 11 24 eor r1, r1 -#ifdef __AVR_ATmega8__ - SP=RAMEND; // This is done by hardware reset -#endif - - // Adaboot no-wait mod - ch = MCUSR; - 3e02: 84 b7 in r24, 0x34 ; 52 - MCUSR = 0; - 3e04: 14 be out 0x34, r1 ; 52 - if (!(ch & _BV(EXTRF))) appStart(); - 3e06: 81 ff sbrs r24, 1 - 3e08: f0 d0 rcall .+480 ; 0x3fea - -#if LED_START_FLASHES > 0 - // Set up Timer 1 for timeout counter - TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 - 3e0a: 85 e0 ldi r24, 0x05 ; 5 - 3e0c: 80 93 81 00 sts 0x0081, r24 - UCSRA = _BV(U2X); //Double speed mode USART - UCSRB = _BV(RXEN) | _BV(TXEN); // enable Rx & Tx - UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0); // config USART; 8N1 - UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); -#else - UCSR0A = _BV(U2X0); //Double speed mode USART0 - 3e10: 82 e0 ldi r24, 0x02 ; 2 - 3e12: 80 93 c0 00 sts 0x00C0, r24 - UCSR0B = _BV(RXEN0) | _BV(TXEN0); - 3e16: 88 e1 ldi r24, 0x18 ; 24 - 3e18: 80 93 c1 00 sts 0x00C1, r24 - UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); - 3e1c: 86 e0 ldi r24, 0x06 ; 6 - 3e1e: 80 93 c2 00 sts 0x00C2, r24 - UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); - 3e22: 80 e1 ldi r24, 0x10 ; 16 - 3e24: 80 93 c4 00 sts 0x00C4, r24 -#endif -#endif - - // Set up watchdog to trigger after 500ms - watchdogConfig(WATCHDOG_1S); - 3e28: 8e e0 ldi r24, 0x0E ; 14 - 3e2a: c9 d0 rcall .+402 ; 0x3fbe - - /* Set LED pin as output */ - LED_DDR |= _BV(LED); - 3e2c: 25 9a sbi 0x04, 5 ; 4 - 3e2e: 86 e0 ldi r24, 0x06 ; 6 -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - 3e30: 20 e3 ldi r18, 0x30 ; 48 - 3e32: 3c ef ldi r19, 0xFC ; 252 - TIFR1 = _BV(TOV1); - 3e34: 91 e0 ldi r25, 0x01 ; 1 -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - 3e36: 30 93 85 00 sts 0x0085, r19 - 3e3a: 20 93 84 00 sts 0x0084, r18 - TIFR1 = _BV(TOV1); - 3e3e: 96 bb out 0x16, r25 ; 22 - while(!(TIFR1 & _BV(TOV1))); - 3e40: b0 9b sbis 0x16, 0 ; 22 - 3e42: fe cf rjmp .-4 ; 0x3e40 -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); - 3e44: 1d 9a sbi 0x03, 5 ; 3 -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - 3e46: a8 95 wdr - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); -#endif - watchdogReset(); - } while (--count); - 3e48: 81 50 subi r24, 0x01 ; 1 - 3e4a: a9 f7 brne .-22 ; 0x3e36 - 3e4c: cc 24 eor r12, r12 - 3e4e: dd 24 eor r13, r13 - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - 3e50: 88 24 eor r8, r8 - 3e52: 83 94 inc r8 - addrPtr += 2; - } while (--ch); - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - 3e54: b5 e0 ldi r27, 0x05 ; 5 - 3e56: ab 2e mov r10, r27 - boot_spm_busy_wait(); - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); - 3e58: a1 e1 ldi r26, 0x11 ; 17 - 3e5a: 9a 2e mov r9, r26 - do *bufPtr++ = getch(); - while (--length); - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 3e5c: f3 e0 ldi r31, 0x03 ; 3 - 3e5e: bf 2e mov r11, r31 -#endif - - /* Forever loop */ - for (;;) { - /* get character from UART */ - ch = getch(); - 3e60: a2 d0 rcall .+324 ; 0x3fa6 - - if(ch == STK_GET_PARAMETER) { - 3e62: 81 34 cpi r24, 0x41 ; 65 - 3e64: 61 f4 brne .+24 ; 0x3e7e - unsigned char which = getch(); - 3e66: 9f d0 rcall .+318 ; 0x3fa6 - 3e68: 08 2f mov r16, r24 - verifySpace(); - 3e6a: af d0 rcall .+350 ; 0x3fca - if (which == 0x82) { - 3e6c: 02 38 cpi r16, 0x82 ; 130 - 3e6e: 11 f0 breq .+4 ; 0x3e74 - /* - * Send optiboot version as "minor SW version" - */ - putch(OPTIBOOT_MINVER); - } else if (which == 0x81) { - 3e70: 01 38 cpi r16, 0x81 ; 129 - 3e72: 11 f4 brne .+4 ; 0x3e78 - putch(OPTIBOOT_MAJVER); - 3e74: 84 e0 ldi r24, 0x04 ; 4 - 3e76: 01 c0 rjmp .+2 ; 0x3e7a - } else { - /* - * GET PARAMETER returns a generic 0x03 reply for - * other parameters - enough to keep Avrdude happy - */ - putch(0x03); - 3e78: 83 e0 ldi r24, 0x03 ; 3 - 3e7a: 8d d0 rcall .+282 ; 0x3f96 - 3e7c: 89 c0 rjmp .+274 ; 0x3f90 - } - } - else if(ch == STK_SET_DEVICE) { - 3e7e: 82 34 cpi r24, 0x42 ; 66 - 3e80: 11 f4 brne .+4 ; 0x3e86 - // SET DEVICE is ignored - getNch(20); - 3e82: 84 e1 ldi r24, 0x14 ; 20 - 3e84: 03 c0 rjmp .+6 ; 0x3e8c - } - else if(ch == STK_SET_DEVICE_EXT) { - 3e86: 85 34 cpi r24, 0x45 ; 69 - 3e88: 19 f4 brne .+6 ; 0x3e90 - // SET DEVICE EXT is ignored - getNch(5); - 3e8a: 85 e0 ldi r24, 0x05 ; 5 - 3e8c: a6 d0 rcall .+332 ; 0x3fda - 3e8e: 80 c0 rjmp .+256 ; 0x3f90 - } - else if(ch == STK_LOAD_ADDRESS) { - 3e90: 85 35 cpi r24, 0x55 ; 85 - 3e92: 79 f4 brne .+30 ; 0x3eb2 - // LOAD ADDRESS - uint16_t newAddress; - newAddress = getch(); - 3e94: 88 d0 rcall .+272 ; 0x3fa6 - newAddress = (newAddress & 0xff) | (getch() << 8); - 3e96: e8 2e mov r14, r24 - 3e98: ff 24 eor r15, r15 - 3e9a: 85 d0 rcall .+266 ; 0x3fa6 - 3e9c: 08 2f mov r16, r24 - 3e9e: 10 e0 ldi r17, 0x00 ; 0 - 3ea0: 10 2f mov r17, r16 - 3ea2: 00 27 eor r16, r16 - 3ea4: 0e 29 or r16, r14 - 3ea6: 1f 29 or r17, r15 -#ifdef RAMPZ - // Transfer top bit to RAMPZ - RAMPZ = (newAddress & 0x8000) ? 1 : 0; -#endif - newAddress += newAddress; // Convert from word address to byte address - 3ea8: 00 0f add r16, r16 - 3eaa: 11 1f adc r17, r17 - address = newAddress; - verifySpace(); - 3eac: 8e d0 rcall .+284 ; 0x3fca - 3eae: 68 01 movw r12, r16 - 3eb0: 6f c0 rjmp .+222 ; 0x3f90 - } - else if(ch == STK_UNIVERSAL) { - 3eb2: 86 35 cpi r24, 0x56 ; 86 - 3eb4: 21 f4 brne .+8 ; 0x3ebe - // UNIVERSAL command is ignored - getNch(4); - 3eb6: 84 e0 ldi r24, 0x04 ; 4 - 3eb8: 90 d0 rcall .+288 ; 0x3fda - putch(0x00); - 3eba: 80 e0 ldi r24, 0x00 ; 0 - 3ebc: de cf rjmp .-68 ; 0x3e7a - } - /* Write memory, length is big endian and is in bytes */ - else if(ch == STK_PROG_PAGE) { - 3ebe: 84 36 cpi r24, 0x64 ; 100 - 3ec0: 09 f0 breq .+2 ; 0x3ec4 - 3ec2: 40 c0 rjmp .+128 ; 0x3f44 - // PROGRAM PAGE - we support flash programming only, not EEPROM - uint8_t *bufPtr; - uint16_t addrPtr; - - getch(); /* getlen() */ - 3ec4: 70 d0 rcall .+224 ; 0x3fa6 - length = getch(); - 3ec6: 6f d0 rcall .+222 ; 0x3fa6 - 3ec8: 08 2f mov r16, r24 - getch(); - 3eca: 6d d0 rcall .+218 ; 0x3fa6 - - // If we are in RWW section, immediately start page erase - if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 3ecc: 80 e0 ldi r24, 0x00 ; 0 - 3ece: c8 16 cp r12, r24 - 3ed0: 88 e3 ldi r24, 0x38 ; 56 - 3ed2: d8 06 cpc r13, r24 - 3ed4: 18 f4 brcc .+6 ; 0x3edc - 3ed6: f6 01 movw r30, r12 - 3ed8: b7 be out 0x37, r11 ; 55 - 3eda: e8 95 spm - 3edc: c0 e0 ldi r28, 0x00 ; 0 - 3ede: d1 e0 ldi r29, 0x01 ; 1 - - // While that is going on, read in page contents - bufPtr = buff; - do *bufPtr++ = getch(); - 3ee0: 62 d0 rcall .+196 ; 0x3fa6 - 3ee2: 89 93 st Y+, r24 - while (--length); - 3ee4: 0c 17 cp r16, r28 - 3ee6: e1 f7 brne .-8 ; 0x3ee0 - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 3ee8: f0 e0 ldi r31, 0x00 ; 0 - 3eea: cf 16 cp r12, r31 - 3eec: f8 e3 ldi r31, 0x38 ; 56 - 3eee: df 06 cpc r13, r31 - 3ef0: 18 f0 brcs .+6 ; 0x3ef8 - 3ef2: f6 01 movw r30, r12 - 3ef4: b7 be out 0x37, r11 ; 55 - 3ef6: e8 95 spm - - // Read command terminator, start reply - verifySpace(); - 3ef8: 68 d0 rcall .+208 ; 0x3fca - - // If only a partial page is to be programmed, the erase might not be complete. - // So check that here - boot_spm_busy_wait(); - 3efa: 07 b6 in r0, 0x37 ; 55 - 3efc: 00 fc sbrc r0, 0 - 3efe: fd cf rjmp .-6 ; 0x3efa - 3f00: a6 01 movw r20, r12 - 3f02: a0 e0 ldi r26, 0x00 ; 0 - 3f04: b1 e0 ldi r27, 0x01 ; 1 - bufPtr = buff; - addrPtr = (uint16_t)(void*)address; - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - 3f06: 2c 91 ld r18, X - 3f08: 30 e0 ldi r19, 0x00 ; 0 - a |= (*bufPtr++) << 8; - 3f0a: 11 96 adiw r26, 0x01 ; 1 - 3f0c: 8c 91 ld r24, X - 3f0e: 11 97 sbiw r26, 0x01 ; 1 - 3f10: 90 e0 ldi r25, 0x00 ; 0 - 3f12: 98 2f mov r25, r24 - 3f14: 88 27 eor r24, r24 - 3f16: 82 2b or r24, r18 - 3f18: 93 2b or r25, r19 -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 3f1a: 12 96 adiw r26, 0x02 ; 2 - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - 3f1c: fa 01 movw r30, r20 - 3f1e: 0c 01 movw r0, r24 - 3f20: 87 be out 0x37, r8 ; 55 - 3f22: e8 95 spm - 3f24: 11 24 eor r1, r1 - addrPtr += 2; - 3f26: 4e 5f subi r20, 0xFE ; 254 - 3f28: 5f 4f sbci r21, 0xFF ; 255 - } while (--ch); - 3f2a: f1 e0 ldi r31, 0x01 ; 1 - 3f2c: a0 38 cpi r26, 0x80 ; 128 - 3f2e: bf 07 cpc r27, r31 - 3f30: 51 f7 brne .-44 ; 0x3f06 - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - 3f32: f6 01 movw r30, r12 - 3f34: a7 be out 0x37, r10 ; 55 - 3f36: e8 95 spm - boot_spm_busy_wait(); - 3f38: 07 b6 in r0, 0x37 ; 55 - 3f3a: 00 fc sbrc r0, 0 - 3f3c: fd cf rjmp .-6 ; 0x3f38 - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); - 3f3e: 97 be out 0x37, r9 ; 55 - 3f40: e8 95 spm - 3f42: 26 c0 rjmp .+76 ; 0x3f90 -#endif - - } - /* Read memory block mode, length is big endian. */ - else if(ch == STK_READ_PAGE) { - 3f44: 84 37 cpi r24, 0x74 ; 116 - 3f46: b1 f4 brne .+44 ; 0x3f74 - // READ PAGE - we only read flash - getch(); /* getlen() */ - 3f48: 2e d0 rcall .+92 ; 0x3fa6 - length = getch(); - 3f4a: 2d d0 rcall .+90 ; 0x3fa6 - 3f4c: f8 2e mov r15, r24 - getch(); - 3f4e: 2b d0 rcall .+86 ; 0x3fa6 - - verifySpace(); - 3f50: 3c d0 rcall .+120 ; 0x3fca - 3f52: f6 01 movw r30, r12 - 3f54: ef 2c mov r14, r15 - putch(result); - address++; - } - while (--length); -#else - do putch(pgm_read_byte_near(address++)); - 3f56: 8f 01 movw r16, r30 - 3f58: 0f 5f subi r16, 0xFF ; 255 - 3f5a: 1f 4f sbci r17, 0xFF ; 255 - 3f5c: 84 91 lpm r24, Z+ - 3f5e: 1b d0 rcall .+54 ; 0x3f96 - while (--length); - 3f60: ea 94 dec r14 - 3f62: f8 01 movw r30, r16 - 3f64: c1 f7 brne .-16 ; 0x3f56 -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 3f66: 08 94 sec - 3f68: c1 1c adc r12, r1 - 3f6a: d1 1c adc r13, r1 - 3f6c: fa 94 dec r15 - 3f6e: cf 0c add r12, r15 - 3f70: d1 1c adc r13, r1 - 3f72: 0e c0 rjmp .+28 ; 0x3f90 -#endif -#endif - } - - /* Get device signature bytes */ - else if(ch == STK_READ_SIGN) { - 3f74: 85 37 cpi r24, 0x75 ; 117 - 3f76: 39 f4 brne .+14 ; 0x3f86 - // READ SIGN - return what Avrdude wants to hear - verifySpace(); - 3f78: 28 d0 rcall .+80 ; 0x3fca - putch(SIGNATURE_0); - 3f7a: 8e e1 ldi r24, 0x1E ; 30 - 3f7c: 0c d0 rcall .+24 ; 0x3f96 - putch(SIGNATURE_1); - 3f7e: 84 e9 ldi r24, 0x94 ; 148 - 3f80: 0a d0 rcall .+20 ; 0x3f96 - putch(SIGNATURE_2); - 3f82: 86 e0 ldi r24, 0x06 ; 6 - 3f84: 7a cf rjmp .-268 ; 0x3e7a - } - else if (ch == 'Q') { - 3f86: 81 35 cpi r24, 0x51 ; 81 - 3f88: 11 f4 brne .+4 ; 0x3f8e - // Adaboot no-wait mod - watchdogConfig(WATCHDOG_16MS); - 3f8a: 88 e0 ldi r24, 0x08 ; 8 - 3f8c: 18 d0 rcall .+48 ; 0x3fbe - verifySpace(); - } - else { - // This covers the response to commands like STK_ENTER_PROGMODE - verifySpace(); - 3f8e: 1d d0 rcall .+58 ; 0x3fca - } - putch(STK_OK); - 3f90: 80 e1 ldi r24, 0x10 ; 16 - 3f92: 01 d0 rcall .+2 ; 0x3f96 - 3f94: 65 cf rjmp .-310 ; 0x3e60 - -00003f96 : - } -} - -void putch(char ch) { - 3f96: 98 2f mov r25, r24 -#ifndef SOFT_UART - while (!(UCSR0A & _BV(UDRE0))); - 3f98: 80 91 c0 00 lds r24, 0x00C0 - 3f9c: 85 ff sbrs r24, 5 - 3f9e: fc cf rjmp .-8 ; 0x3f98 - UDR0 = ch; - 3fa0: 90 93 c6 00 sts 0x00C6, r25 - [uartBit] "I" (UART_TX_BIT) - : - "r25" - ); -#endif -} - 3fa4: 08 95 ret - -00003fa6 : - [uartBit] "I" (UART_RX_BIT) - : - "r25" -); -#else - while(!(UCSR0A & _BV(RXC0))) - 3fa6: 80 91 c0 00 lds r24, 0x00C0 - 3faa: 87 ff sbrs r24, 7 - 3fac: fc cf rjmp .-8 ; 0x3fa6 - ; - if (!(UCSR0A & _BV(FE0))) { - 3fae: 80 91 c0 00 lds r24, 0x00C0 - 3fb2: 84 fd sbrc r24, 4 - 3fb4: 01 c0 rjmp .+2 ; 0x3fb8 -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - 3fb6: a8 95 wdr - * don't care that an invalid char is returned...) - */ - watchdogReset(); - } - - ch = UDR0; - 3fb8: 80 91 c6 00 lds r24, 0x00C6 - LED_PIN |= _BV(LED); -#endif -#endif - - return ch; -} - 3fbc: 08 95 ret - -00003fbe : - "wdr\n" - ); -} - -void watchdogConfig(uint8_t x) { - WDTCSR = _BV(WDCE) | _BV(WDE); - 3fbe: e0 e6 ldi r30, 0x60 ; 96 - 3fc0: f0 e0 ldi r31, 0x00 ; 0 - 3fc2: 98 e1 ldi r25, 0x18 ; 24 - 3fc4: 90 83 st Z, r25 - WDTCSR = x; - 3fc6: 80 83 st Z, r24 -} - 3fc8: 08 95 ret - -00003fca : - do getch(); while (--count); - verifySpace(); -} - -void verifySpace() { - if (getch() != CRC_EOP) { - 3fca: ed df rcall .-38 ; 0x3fa6 - 3fcc: 80 32 cpi r24, 0x20 ; 32 - 3fce: 19 f0 breq .+6 ; 0x3fd6 - watchdogConfig(WATCHDOG_16MS); // shorten WD timeout - 3fd0: 88 e0 ldi r24, 0x08 ; 8 - 3fd2: f5 df rcall .-22 ; 0x3fbe - 3fd4: ff cf rjmp .-2 ; 0x3fd4 - while (1) // and busy-loop so that WD causes - ; // a reset and app start. - } - putch(STK_INSYNC); - 3fd6: 84 e1 ldi r24, 0x14 ; 20 -} - 3fd8: de cf rjmp .-68 ; 0x3f96 - -00003fda : - ::[count] "M" (UART_B_VALUE) - ); -} -#endif - -void getNch(uint8_t count) { - 3fda: 1f 93 push r17 - 3fdc: 18 2f mov r17, r24 - do getch(); while (--count); - 3fde: e3 df rcall .-58 ; 0x3fa6 - 3fe0: 11 50 subi r17, 0x01 ; 1 - 3fe2: e9 f7 brne .-6 ; 0x3fde - verifySpace(); - 3fe4: f2 df rcall .-28 ; 0x3fca -} - 3fe6: 1f 91 pop r17 - 3fe8: 08 95 ret - -00003fea : - WDTCSR = _BV(WDCE) | _BV(WDE); - WDTCSR = x; -} - -void appStart() { - watchdogConfig(WATCHDOG_OFF); - 3fea: 80 e0 ldi r24, 0x00 ; 0 - 3fec: e8 df rcall .-48 ; 0x3fbe - __asm__ __volatile__ ( - 3fee: ee 27 eor r30, r30 - 3ff0: ff 27 eor r31, r31 - 3ff2: 09 94 ijmp diff --git a/bootloaders/optiboot/optiboot_atmega328-Mini.hex b/bootloaders/optiboot/optiboot_atmega328-Mini.hex deleted file mode 100644 index 02266ee8..00000000 --- a/bootloaders/optiboot/optiboot_atmega328-Mini.hex +++ /dev/null @@ -1,33 +0,0 @@ -:107E000085E08093810082E08093C00088E18093C8 -:107E1000C10086E08093C20080E18093C40084B7F3 -:107E200014BE81FFD0D089E2C8D0259A86E020E335 -:107E30003CEF91E0309385002093840096BBB09B8B -:107E4000FECF1D9AA8958150A9F7DD24D394A5E013 -:107E5000EA2EF1E1FF2EA4D0813421F481E0BED0DE -:107E600083E024C0823411F484E103C0853419F422 -:107E700085E0B4D08AC08535A1F492D0082F10E0F7 -:107E800010930102009300028BD090E0982F882776 -:107E9000802B912B880F991F9093010280930002F1 -:107EA00073C0863529F484E099D080E071D06DC02C -:107EB000843609F043C07CD0E0910002F0910102C9 -:107EC00083E080935700E895C0E0D1E069D08993C2 -:107ED000809102028150809302028823B9F778D002 -:107EE00007B600FCFDCF4091000250910102A0E0D6 -:107EF000B1E02C9130E011968C91119790E0982F81 -:107F00008827822B932B1296FA010C01D0925700EE -:107F1000E89511244E5F5F4FF1E0A038BF0749F7A5 -:107F2000E0910002F0910102E0925700E89507B657 -:107F300000FCFDCFF0925700E89527C08437B9F4D4 -:107F400037D046D0E0910002F09101023196F093D3 -:107F50000102E09300023197E4918E2F19D08091B5 -:107F60000202815080930202882361F70EC0853798 -:107F700039F42ED08EE10CD085E90AD08FE096CF6F -:107F8000813511F488E019D023D080E101D063CF8E -:107F9000982F8091C00085FFFCCF9093C600089574 -:107FA000A8958091C00087FFFCCF8091C6000895FE -:107FB000F7DFF6DF80930202F3CFE0E6F0E098E12E -:107FC00090838083089580E0F8DFEE27FF270994EF -:107FD000E7DF803209F0F7DF84E1DACF1F93182F53 -:0C7FE000DFDF1150E9F7F4DF1F91089576 -:0400000300007E007B -:00000001FF diff --git a/bootloaders/optiboot/optiboot_atmega328.hex b/bootloaders/optiboot/optiboot_atmega328.hex deleted file mode 100644 index a219f083..00000000 --- a/bootloaders/optiboot/optiboot_atmega328.hex +++ /dev/null @@ -1,35 +0,0 @@ -:107E0000112484B714BE81FFF0D085E080938100F7 -:107E100082E08093C00088E18093C10086E0809377 -:107E2000C20080E18093C4008EE0C9D0259A86E02C -:107E300020E33CEF91E0309385002093840096BBD3 -:107E4000B09BFECF1D9AA8958150A9F7CC24DD24C4 -:107E500088248394B5E0AB2EA1E19A2EF3E0BF2EE7 -:107E6000A2D0813461F49FD0082FAFD0023811F036 -:107E7000013811F484E001C083E08DD089C08234E0 -:107E800011F484E103C0853419F485E0A6D080C0E4 -:107E9000853579F488D0E82EFF2485D0082F10E0AE -:107EA000102F00270E291F29000F111F8ED06801E7 -:107EB0006FC0863521F484E090D080E0DECF843638 -:107EC00009F040C070D06FD0082F6DD080E0C81688 -:107ED00080E7D80618F4F601B7BEE895C0E0D1E017 -:107EE00062D089930C17E1F7F0E0CF16F0E7DF06D8 -:107EF00018F0F601B7BEE89568D007B600FCFDCFD4 -:107F0000A601A0E0B1E02C9130E011968C91119780 -:107F100090E0982F8827822B932B1296FA010C0160 -:107F200087BEE89511244E5F5F4FF1E0A038BF0790 -:107F300051F7F601A7BEE89507B600FCFDCF97BE46 -:107F4000E89526C08437B1F42ED02DD0F82E2BD052 -:107F50003CD0F601EF2C8F010F5F1F4F84911BD097 -:107F6000EA94F801C1F70894C11CD11CFA94CF0C13 -:107F7000D11C0EC0853739F428D08EE10CD085E9AC -:107F80000AD08FE07ACF813511F488E018D01DD067 -:107F900080E101D065CF982F8091C00085FFFCCF94 -:107FA0009093C60008958091C00087FFFCCF809118 -:107FB000C00084FD01C0A8958091C6000895E0E648 -:107FC000F0E098E1908380830895EDDF803219F02E -:107FD00088E0F5DFFFCF84E1DECF1F93182FE3DFCA -:107FE0001150E9F7F2DF1F91089580E0E8DFEE27F6 -:047FF000FF270994CA -:027FFE00040479 -:0400000300007E007B -:00000001FF diff --git a/bootloaders/optiboot/optiboot_atmega328.lst b/bootloaders/optiboot/optiboot_atmega328.lst deleted file mode 100644 index d9dd4cc2..00000000 --- a/bootloaders/optiboot/optiboot_atmega328.lst +++ /dev/null @@ -1,598 +0,0 @@ - -optiboot_atmega328.elf: file format elf32-avr - -Sections: -Idx Name Size VMA LMA File off Algn - 0 .text 000001f4 00007e00 00007e00 00000054 2**1 - CONTENTS, ALLOC, LOAD, READONLY, CODE - 1 .version 00000002 00007ffe 00007ffe 00000248 2**0 - CONTENTS, READONLY - 2 .debug_aranges 00000028 00000000 00000000 0000024a 2**0 - CONTENTS, READONLY, DEBUGGING - 3 .debug_pubnames 0000005f 00000000 00000000 00000272 2**0 - CONTENTS, READONLY, DEBUGGING - 4 .debug_info 000002a8 00000000 00000000 000002d1 2**0 - CONTENTS, READONLY, DEBUGGING - 5 .debug_abbrev 00000178 00000000 00000000 00000579 2**0 - CONTENTS, READONLY, DEBUGGING - 6 .debug_line 00000488 00000000 00000000 000006f1 2**0 - CONTENTS, READONLY, DEBUGGING - 7 .debug_frame 00000080 00000000 00000000 00000b7c 2**2 - CONTENTS, READONLY, DEBUGGING - 8 .debug_str 0000014f 00000000 00000000 00000bfc 2**0 - CONTENTS, READONLY, DEBUGGING - 9 .debug_loc 000002d8 00000000 00000000 00000d4b 2**0 - CONTENTS, READONLY, DEBUGGING - 10 .debug_ranges 00000078 00000000 00000000 00001023 2**0 - CONTENTS, READONLY, DEBUGGING - -Disassembly of section .text: - -00007e00
: -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 7e00: 11 24 eor r1, r1 -#ifdef __AVR_ATmega8__ - SP=RAMEND; // This is done by hardware reset -#endif - - // Adaboot no-wait mod - ch = MCUSR; - 7e02: 84 b7 in r24, 0x34 ; 52 - MCUSR = 0; - 7e04: 14 be out 0x34, r1 ; 52 - if (!(ch & _BV(EXTRF))) appStart(); - 7e06: 81 ff sbrs r24, 1 - 7e08: f0 d0 rcall .+480 ; 0x7fea - -#if LED_START_FLASHES > 0 - // Set up Timer 1 for timeout counter - TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 - 7e0a: 85 e0 ldi r24, 0x05 ; 5 - 7e0c: 80 93 81 00 sts 0x0081, r24 - UCSRA = _BV(U2X); //Double speed mode USART - UCSRB = _BV(RXEN) | _BV(TXEN); // enable Rx & Tx - UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0); // config USART; 8N1 - UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); -#else - UCSR0A = _BV(U2X0); //Double speed mode USART0 - 7e10: 82 e0 ldi r24, 0x02 ; 2 - 7e12: 80 93 c0 00 sts 0x00C0, r24 - UCSR0B = _BV(RXEN0) | _BV(TXEN0); - 7e16: 88 e1 ldi r24, 0x18 ; 24 - 7e18: 80 93 c1 00 sts 0x00C1, r24 - UCSR0C = _BV(UCSZ00) | _BV(UCSZ01); - 7e1c: 86 e0 ldi r24, 0x06 ; 6 - 7e1e: 80 93 c2 00 sts 0x00C2, r24 - UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); - 7e22: 80 e1 ldi r24, 0x10 ; 16 - 7e24: 80 93 c4 00 sts 0x00C4, r24 -#endif -#endif - - // Set up watchdog to trigger after 500ms - watchdogConfig(WATCHDOG_1S); - 7e28: 8e e0 ldi r24, 0x0E ; 14 - 7e2a: c9 d0 rcall .+402 ; 0x7fbe - - /* Set LED pin as output */ - LED_DDR |= _BV(LED); - 7e2c: 25 9a sbi 0x04, 5 ; 4 - 7e2e: 86 e0 ldi r24, 0x06 ; 6 -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - 7e30: 20 e3 ldi r18, 0x30 ; 48 - 7e32: 3c ef ldi r19, 0xFC ; 252 - TIFR1 = _BV(TOV1); - 7e34: 91 e0 ldi r25, 0x01 ; 1 -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - 7e36: 30 93 85 00 sts 0x0085, r19 - 7e3a: 20 93 84 00 sts 0x0084, r18 - TIFR1 = _BV(TOV1); - 7e3e: 96 bb out 0x16, r25 ; 22 - while(!(TIFR1 & _BV(TOV1))); - 7e40: b0 9b sbis 0x16, 0 ; 22 - 7e42: fe cf rjmp .-4 ; 0x7e40 -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); - 7e44: 1d 9a sbi 0x03, 5 ; 3 -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - 7e46: a8 95 wdr - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); -#endif - watchdogReset(); - } while (--count); - 7e48: 81 50 subi r24, 0x01 ; 1 - 7e4a: a9 f7 brne .-22 ; 0x7e36 - 7e4c: cc 24 eor r12, r12 - 7e4e: dd 24 eor r13, r13 - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - 7e50: 88 24 eor r8, r8 - 7e52: 83 94 inc r8 - addrPtr += 2; - } while (--ch); - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - 7e54: b5 e0 ldi r27, 0x05 ; 5 - 7e56: ab 2e mov r10, r27 - boot_spm_busy_wait(); - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); - 7e58: a1 e1 ldi r26, 0x11 ; 17 - 7e5a: 9a 2e mov r9, r26 - do *bufPtr++ = getch(); - while (--length); - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 7e5c: f3 e0 ldi r31, 0x03 ; 3 - 7e5e: bf 2e mov r11, r31 -#endif - - /* Forever loop */ - for (;;) { - /* get character from UART */ - ch = getch(); - 7e60: a2 d0 rcall .+324 ; 0x7fa6 - - if(ch == STK_GET_PARAMETER) { - 7e62: 81 34 cpi r24, 0x41 ; 65 - 7e64: 61 f4 brne .+24 ; 0x7e7e - unsigned char which = getch(); - 7e66: 9f d0 rcall .+318 ; 0x7fa6 - 7e68: 08 2f mov r16, r24 - verifySpace(); - 7e6a: af d0 rcall .+350 ; 0x7fca - if (which == 0x82) { - 7e6c: 02 38 cpi r16, 0x82 ; 130 - 7e6e: 11 f0 breq .+4 ; 0x7e74 - /* - * Send optiboot version as "minor SW version" - */ - putch(OPTIBOOT_MINVER); - } else if (which == 0x81) { - 7e70: 01 38 cpi r16, 0x81 ; 129 - 7e72: 11 f4 brne .+4 ; 0x7e78 - putch(OPTIBOOT_MAJVER); - 7e74: 84 e0 ldi r24, 0x04 ; 4 - 7e76: 01 c0 rjmp .+2 ; 0x7e7a - } else { - /* - * GET PARAMETER returns a generic 0x03 reply for - * other parameters - enough to keep Avrdude happy - */ - putch(0x03); - 7e78: 83 e0 ldi r24, 0x03 ; 3 - 7e7a: 8d d0 rcall .+282 ; 0x7f96 - 7e7c: 89 c0 rjmp .+274 ; 0x7f90 - } - } - else if(ch == STK_SET_DEVICE) { - 7e7e: 82 34 cpi r24, 0x42 ; 66 - 7e80: 11 f4 brne .+4 ; 0x7e86 - // SET DEVICE is ignored - getNch(20); - 7e82: 84 e1 ldi r24, 0x14 ; 20 - 7e84: 03 c0 rjmp .+6 ; 0x7e8c - } - else if(ch == STK_SET_DEVICE_EXT) { - 7e86: 85 34 cpi r24, 0x45 ; 69 - 7e88: 19 f4 brne .+6 ; 0x7e90 - // SET DEVICE EXT is ignored - getNch(5); - 7e8a: 85 e0 ldi r24, 0x05 ; 5 - 7e8c: a6 d0 rcall .+332 ; 0x7fda - 7e8e: 80 c0 rjmp .+256 ; 0x7f90 - } - else if(ch == STK_LOAD_ADDRESS) { - 7e90: 85 35 cpi r24, 0x55 ; 85 - 7e92: 79 f4 brne .+30 ; 0x7eb2 - // LOAD ADDRESS - uint16_t newAddress; - newAddress = getch(); - 7e94: 88 d0 rcall .+272 ; 0x7fa6 - newAddress = (newAddress & 0xff) | (getch() << 8); - 7e96: e8 2e mov r14, r24 - 7e98: ff 24 eor r15, r15 - 7e9a: 85 d0 rcall .+266 ; 0x7fa6 - 7e9c: 08 2f mov r16, r24 - 7e9e: 10 e0 ldi r17, 0x00 ; 0 - 7ea0: 10 2f mov r17, r16 - 7ea2: 00 27 eor r16, r16 - 7ea4: 0e 29 or r16, r14 - 7ea6: 1f 29 or r17, r15 -#ifdef RAMPZ - // Transfer top bit to RAMPZ - RAMPZ = (newAddress & 0x8000) ? 1 : 0; -#endif - newAddress += newAddress; // Convert from word address to byte address - 7ea8: 00 0f add r16, r16 - 7eaa: 11 1f adc r17, r17 - address = newAddress; - verifySpace(); - 7eac: 8e d0 rcall .+284 ; 0x7fca - 7eae: 68 01 movw r12, r16 - 7eb0: 6f c0 rjmp .+222 ; 0x7f90 - } - else if(ch == STK_UNIVERSAL) { - 7eb2: 86 35 cpi r24, 0x56 ; 86 - 7eb4: 21 f4 brne .+8 ; 0x7ebe - // UNIVERSAL command is ignored - getNch(4); - 7eb6: 84 e0 ldi r24, 0x04 ; 4 - 7eb8: 90 d0 rcall .+288 ; 0x7fda - putch(0x00); - 7eba: 80 e0 ldi r24, 0x00 ; 0 - 7ebc: de cf rjmp .-68 ; 0x7e7a - } - /* Write memory, length is big endian and is in bytes */ - else if(ch == STK_PROG_PAGE) { - 7ebe: 84 36 cpi r24, 0x64 ; 100 - 7ec0: 09 f0 breq .+2 ; 0x7ec4 - 7ec2: 40 c0 rjmp .+128 ; 0x7f44 - // PROGRAM PAGE - we support flash programming only, not EEPROM - uint8_t *bufPtr; - uint16_t addrPtr; - - getch(); /* getlen() */ - 7ec4: 70 d0 rcall .+224 ; 0x7fa6 - length = getch(); - 7ec6: 6f d0 rcall .+222 ; 0x7fa6 - 7ec8: 08 2f mov r16, r24 - getch(); - 7eca: 6d d0 rcall .+218 ; 0x7fa6 - - // If we are in RWW section, immediately start page erase - if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 7ecc: 80 e0 ldi r24, 0x00 ; 0 - 7ece: c8 16 cp r12, r24 - 7ed0: 80 e7 ldi r24, 0x70 ; 112 - 7ed2: d8 06 cpc r13, r24 - 7ed4: 18 f4 brcc .+6 ; 0x7edc - 7ed6: f6 01 movw r30, r12 - 7ed8: b7 be out 0x37, r11 ; 55 - 7eda: e8 95 spm - 7edc: c0 e0 ldi r28, 0x00 ; 0 - 7ede: d1 e0 ldi r29, 0x01 ; 1 - - // While that is going on, read in page contents - bufPtr = buff; - do *bufPtr++ = getch(); - 7ee0: 62 d0 rcall .+196 ; 0x7fa6 - 7ee2: 89 93 st Y+, r24 - while (--length); - 7ee4: 0c 17 cp r16, r28 - 7ee6: e1 f7 brne .-8 ; 0x7ee0 - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 7ee8: f0 e0 ldi r31, 0x00 ; 0 - 7eea: cf 16 cp r12, r31 - 7eec: f0 e7 ldi r31, 0x70 ; 112 - 7eee: df 06 cpc r13, r31 - 7ef0: 18 f0 brcs .+6 ; 0x7ef8 - 7ef2: f6 01 movw r30, r12 - 7ef4: b7 be out 0x37, r11 ; 55 - 7ef6: e8 95 spm - - // Read command terminator, start reply - verifySpace(); - 7ef8: 68 d0 rcall .+208 ; 0x7fca - - // If only a partial page is to be programmed, the erase might not be complete. - // So check that here - boot_spm_busy_wait(); - 7efa: 07 b6 in r0, 0x37 ; 55 - 7efc: 00 fc sbrc r0, 0 - 7efe: fd cf rjmp .-6 ; 0x7efa - 7f00: a6 01 movw r20, r12 - 7f02: a0 e0 ldi r26, 0x00 ; 0 - 7f04: b1 e0 ldi r27, 0x01 ; 1 - bufPtr = buff; - addrPtr = (uint16_t)(void*)address; - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - 7f06: 2c 91 ld r18, X - 7f08: 30 e0 ldi r19, 0x00 ; 0 - a |= (*bufPtr++) << 8; - 7f0a: 11 96 adiw r26, 0x01 ; 1 - 7f0c: 8c 91 ld r24, X - 7f0e: 11 97 sbiw r26, 0x01 ; 1 - 7f10: 90 e0 ldi r25, 0x00 ; 0 - 7f12: 98 2f mov r25, r24 - 7f14: 88 27 eor r24, r24 - 7f16: 82 2b or r24, r18 - 7f18: 93 2b or r25, r19 -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 7f1a: 12 96 adiw r26, 0x02 ; 2 - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - 7f1c: fa 01 movw r30, r20 - 7f1e: 0c 01 movw r0, r24 - 7f20: 87 be out 0x37, r8 ; 55 - 7f22: e8 95 spm - 7f24: 11 24 eor r1, r1 - addrPtr += 2; - 7f26: 4e 5f subi r20, 0xFE ; 254 - 7f28: 5f 4f sbci r21, 0xFF ; 255 - } while (--ch); - 7f2a: f1 e0 ldi r31, 0x01 ; 1 - 7f2c: a0 38 cpi r26, 0x80 ; 128 - 7f2e: bf 07 cpc r27, r31 - 7f30: 51 f7 brne .-44 ; 0x7f06 - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - 7f32: f6 01 movw r30, r12 - 7f34: a7 be out 0x37, r10 ; 55 - 7f36: e8 95 spm - boot_spm_busy_wait(); - 7f38: 07 b6 in r0, 0x37 ; 55 - 7f3a: 00 fc sbrc r0, 0 - 7f3c: fd cf rjmp .-6 ; 0x7f38 - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); - 7f3e: 97 be out 0x37, r9 ; 55 - 7f40: e8 95 spm - 7f42: 26 c0 rjmp .+76 ; 0x7f90 -#endif - - } - /* Read memory block mode, length is big endian. */ - else if(ch == STK_READ_PAGE) { - 7f44: 84 37 cpi r24, 0x74 ; 116 - 7f46: b1 f4 brne .+44 ; 0x7f74 - // READ PAGE - we only read flash - getch(); /* getlen() */ - 7f48: 2e d0 rcall .+92 ; 0x7fa6 - length = getch(); - 7f4a: 2d d0 rcall .+90 ; 0x7fa6 - 7f4c: f8 2e mov r15, r24 - getch(); - 7f4e: 2b d0 rcall .+86 ; 0x7fa6 - - verifySpace(); - 7f50: 3c d0 rcall .+120 ; 0x7fca - 7f52: f6 01 movw r30, r12 - 7f54: ef 2c mov r14, r15 - putch(result); - address++; - } - while (--length); -#else - do putch(pgm_read_byte_near(address++)); - 7f56: 8f 01 movw r16, r30 - 7f58: 0f 5f subi r16, 0xFF ; 255 - 7f5a: 1f 4f sbci r17, 0xFF ; 255 - 7f5c: 84 91 lpm r24, Z+ - 7f5e: 1b d0 rcall .+54 ; 0x7f96 - while (--length); - 7f60: ea 94 dec r14 - 7f62: f8 01 movw r30, r16 - 7f64: c1 f7 brne .-16 ; 0x7f56 -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 7f66: 08 94 sec - 7f68: c1 1c adc r12, r1 - 7f6a: d1 1c adc r13, r1 - 7f6c: fa 94 dec r15 - 7f6e: cf 0c add r12, r15 - 7f70: d1 1c adc r13, r1 - 7f72: 0e c0 rjmp .+28 ; 0x7f90 -#endif -#endif - } - - /* Get device signature bytes */ - else if(ch == STK_READ_SIGN) { - 7f74: 85 37 cpi r24, 0x75 ; 117 - 7f76: 39 f4 brne .+14 ; 0x7f86 - // READ SIGN - return what Avrdude wants to hear - verifySpace(); - 7f78: 28 d0 rcall .+80 ; 0x7fca - putch(SIGNATURE_0); - 7f7a: 8e e1 ldi r24, 0x1E ; 30 - 7f7c: 0c d0 rcall .+24 ; 0x7f96 - putch(SIGNATURE_1); - 7f7e: 85 e9 ldi r24, 0x95 ; 149 - 7f80: 0a d0 rcall .+20 ; 0x7f96 - putch(SIGNATURE_2); - 7f82: 8f e0 ldi r24, 0x0F ; 15 - 7f84: 7a cf rjmp .-268 ; 0x7e7a - } - else if (ch == 'Q') { - 7f86: 81 35 cpi r24, 0x51 ; 81 - 7f88: 11 f4 brne .+4 ; 0x7f8e - // Adaboot no-wait mod - watchdogConfig(WATCHDOG_16MS); - 7f8a: 88 e0 ldi r24, 0x08 ; 8 - 7f8c: 18 d0 rcall .+48 ; 0x7fbe - verifySpace(); - } - else { - // This covers the response to commands like STK_ENTER_PROGMODE - verifySpace(); - 7f8e: 1d d0 rcall .+58 ; 0x7fca - } - putch(STK_OK); - 7f90: 80 e1 ldi r24, 0x10 ; 16 - 7f92: 01 d0 rcall .+2 ; 0x7f96 - 7f94: 65 cf rjmp .-310 ; 0x7e60 - -00007f96 : - } -} - -void putch(char ch) { - 7f96: 98 2f mov r25, r24 -#ifndef SOFT_UART - while (!(UCSR0A & _BV(UDRE0))); - 7f98: 80 91 c0 00 lds r24, 0x00C0 - 7f9c: 85 ff sbrs r24, 5 - 7f9e: fc cf rjmp .-8 ; 0x7f98 - UDR0 = ch; - 7fa0: 90 93 c6 00 sts 0x00C6, r25 - [uartBit] "I" (UART_TX_BIT) - : - "r25" - ); -#endif -} - 7fa4: 08 95 ret - -00007fa6 : - [uartBit] "I" (UART_RX_BIT) - : - "r25" -); -#else - while(!(UCSR0A & _BV(RXC0))) - 7fa6: 80 91 c0 00 lds r24, 0x00C0 - 7faa: 87 ff sbrs r24, 7 - 7fac: fc cf rjmp .-8 ; 0x7fa6 - ; - if (!(UCSR0A & _BV(FE0))) { - 7fae: 80 91 c0 00 lds r24, 0x00C0 - 7fb2: 84 fd sbrc r24, 4 - 7fb4: 01 c0 rjmp .+2 ; 0x7fb8 -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - 7fb6: a8 95 wdr - * don't care that an invalid char is returned...) - */ - watchdogReset(); - } - - ch = UDR0; - 7fb8: 80 91 c6 00 lds r24, 0x00C6 - LED_PIN |= _BV(LED); -#endif -#endif - - return ch; -} - 7fbc: 08 95 ret - -00007fbe : - "wdr\n" - ); -} - -void watchdogConfig(uint8_t x) { - WDTCSR = _BV(WDCE) | _BV(WDE); - 7fbe: e0 e6 ldi r30, 0x60 ; 96 - 7fc0: f0 e0 ldi r31, 0x00 ; 0 - 7fc2: 98 e1 ldi r25, 0x18 ; 24 - 7fc4: 90 83 st Z, r25 - WDTCSR = x; - 7fc6: 80 83 st Z, r24 -} - 7fc8: 08 95 ret - -00007fca : - do getch(); while (--count); - verifySpace(); -} - -void verifySpace() { - if (getch() != CRC_EOP) { - 7fca: ed df rcall .-38 ; 0x7fa6 - 7fcc: 80 32 cpi r24, 0x20 ; 32 - 7fce: 19 f0 breq .+6 ; 0x7fd6 - watchdogConfig(WATCHDOG_16MS); // shorten WD timeout - 7fd0: 88 e0 ldi r24, 0x08 ; 8 - 7fd2: f5 df rcall .-22 ; 0x7fbe - 7fd4: ff cf rjmp .-2 ; 0x7fd4 - while (1) // and busy-loop so that WD causes - ; // a reset and app start. - } - putch(STK_INSYNC); - 7fd6: 84 e1 ldi r24, 0x14 ; 20 -} - 7fd8: de cf rjmp .-68 ; 0x7f96 - -00007fda : - ::[count] "M" (UART_B_VALUE) - ); -} -#endif - -void getNch(uint8_t count) { - 7fda: 1f 93 push r17 - 7fdc: 18 2f mov r17, r24 - do getch(); while (--count); - 7fde: e3 df rcall .-58 ; 0x7fa6 - 7fe0: 11 50 subi r17, 0x01 ; 1 - 7fe2: e9 f7 brne .-6 ; 0x7fde - verifySpace(); - 7fe4: f2 df rcall .-28 ; 0x7fca -} - 7fe6: 1f 91 pop r17 - 7fe8: 08 95 ret - -00007fea : - WDTCSR = _BV(WDCE) | _BV(WDE); - WDTCSR = x; -} - -void appStart() { - watchdogConfig(WATCHDOG_OFF); - 7fea: 80 e0 ldi r24, 0x00 ; 0 - 7fec: e8 df rcall .-48 ; 0x7fbe - __asm__ __volatile__ ( - 7fee: ee 27 eor r30, r30 - 7ff0: ff 27 eor r31, r31 - 7ff2: 09 94 ijmp diff --git a/bootloaders/optiboot/optiboot_atmega8.hex b/bootloaders/optiboot/optiboot_atmega8.hex deleted file mode 100644 index b04f2768..00000000 --- a/bootloaders/optiboot/optiboot_atmega8.hex +++ /dev/null @@ -1,33 +0,0 @@ -:101E000011248FE594E09EBF8DBF84B714BE81FF7F -:101E1000E2D085E08EBD82E08BB988E18AB986E8A0 -:101E200080BD80E189B98EE0C2D0BD9A96E020E302 -:101E30003CEF54E040E23DBD2CBD58BF08B602FE69 -:101E4000FDCF88B3842788BBA8959150A1F7CC24F7 -:101E5000DD2488248394B5E0AB2EA1E19A2EF3E033 -:101E6000BF2E9ED0813461F49BD0082FA4D00238BD -:101E700011F0013811F484E001C083E08DD089C0F5 -:101E8000823411F484E103C0853419F485E09BD0D9 -:101E900080C0853579F484D0E82EFF2481D0082FC6 -:101EA00010E0102F00270E291F29000F111F83D0CB -:101EB00068016FC0863521F484E085D080E0DECFF4 -:101EC000843609F040C06CD06BD0082F69D080E018 -:101ED000C81688E1D80618F4F601B7BEE895C0E048 -:101EE000D1E05ED089930C17E1F7F0E0CF16F8E16E -:101EF000DF0618F0F601B7BEE8955DD007B600FC26 -:101F0000FDCFA601A0E0B1E02C9130E011968C91BC -:101F1000119790E0982F8827822B932B1296FA0125 -:101F20000C0187BEE89511244E5F5F4FF1E0A034AD -:101F3000BF0751F7F601A7BEE89507B600FCFDCF35 -:101F400097BEE89526C08437B1F42AD029D0F82E60 -:101F500027D031D0F601EF2C8F010F5F1F4F8491F6 -:101F60001BD0EA94F801C1F70894C11CD11CFA9463 -:101F7000CF0CD11C0EC0853739F41DD08EE10CD0AA -:101F800083E90AD087E07ACF813511F488E00FD059 -:101F900012D080E101D065CF5D9BFECF8CB9089552 -:101FA0005F9BFECF5C9901C0A8958CB1089598E124 -:101FB00091BD81BD0895F4DF803219F088E0F7DF2C -:101FC000FFCF84E1E9CF1F93182FEADF1150E9F723 -:101FD000F2DF1F91089580E0EADFEE27FF270994E2 -:021FFE000404D9 -:0400000300001E00DB -:00000001FF diff --git a/bootloaders/optiboot/optiboot_atmega8.lst b/bootloaders/optiboot/optiboot_atmega8.lst deleted file mode 100644 index d9218958..00000000 --- a/bootloaders/optiboot/optiboot_atmega8.lst +++ /dev/null @@ -1,604 +0,0 @@ - -optiboot_atmega8.elf: file format elf32-avr - -Sections: -Idx Name Size VMA LMA File off Algn - 0 .text 000001e0 00001e00 00001e00 00000054 2**1 - CONTENTS, ALLOC, LOAD, READONLY, CODE - 1 .version 00000002 00001ffe 00001ffe 00000234 2**0 - CONTENTS, READONLY - 2 .debug_aranges 00000028 00000000 00000000 00000236 2**0 - CONTENTS, READONLY, DEBUGGING - 3 .debug_pubnames 0000005f 00000000 00000000 0000025e 2**0 - CONTENTS, READONLY, DEBUGGING - 4 .debug_info 000002a6 00000000 00000000 000002bd 2**0 - CONTENTS, READONLY, DEBUGGING - 5 .debug_abbrev 00000169 00000000 00000000 00000563 2**0 - CONTENTS, READONLY, DEBUGGING - 6 .debug_line 00000498 00000000 00000000 000006cc 2**0 - CONTENTS, READONLY, DEBUGGING - 7 .debug_frame 00000080 00000000 00000000 00000b64 2**2 - CONTENTS, READONLY, DEBUGGING - 8 .debug_str 0000014f 00000000 00000000 00000be4 2**0 - CONTENTS, READONLY, DEBUGGING - 9 .debug_loc 000002ba 00000000 00000000 00000d33 2**0 - CONTENTS, READONLY, DEBUGGING - 10 .debug_ranges 00000078 00000000 00000000 00000fed 2**0 - CONTENTS, READONLY, DEBUGGING - -Disassembly of section .text: - -00001e00
: -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 1e00: 11 24 eor r1, r1 - // - // If not, uncomment the following instructions: - // cli(); - asm volatile ("clr __zero_reg__"); -#ifdef __AVR_ATmega8__ - SP=RAMEND; // This is done by hardware reset - 1e02: 8f e5 ldi r24, 0x5F ; 95 - 1e04: 94 e0 ldi r25, 0x04 ; 4 - 1e06: 9e bf out 0x3e, r25 ; 62 - 1e08: 8d bf out 0x3d, r24 ; 61 -#endif - - // Adaboot no-wait mod - ch = MCUSR; - 1e0a: 84 b7 in r24, 0x34 ; 52 - MCUSR = 0; - 1e0c: 14 be out 0x34, r1 ; 52 - if (!(ch & _BV(EXTRF))) appStart(); - 1e0e: 81 ff sbrs r24, 1 - 1e10: e2 d0 rcall .+452 ; 0x1fd6 - -#if LED_START_FLASHES > 0 - // Set up Timer 1 for timeout counter - TCCR1B = _BV(CS12) | _BV(CS10); // div 1024 - 1e12: 85 e0 ldi r24, 0x05 ; 5 - 1e14: 8e bd out 0x2e, r24 ; 46 -#endif -#ifndef SOFT_UART -#ifdef __AVR_ATmega8__ - UCSRA = _BV(U2X); //Double speed mode USART - 1e16: 82 e0 ldi r24, 0x02 ; 2 - 1e18: 8b b9 out 0x0b, r24 ; 11 - UCSRB = _BV(RXEN) | _BV(TXEN); // enable Rx & Tx - 1e1a: 88 e1 ldi r24, 0x18 ; 24 - 1e1c: 8a b9 out 0x0a, r24 ; 10 - UCSRC = _BV(URSEL) | _BV(UCSZ1) | _BV(UCSZ0); // config USART; 8N1 - 1e1e: 86 e8 ldi r24, 0x86 ; 134 - 1e20: 80 bd out 0x20, r24 ; 32 - UBRRL = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); - 1e22: 80 e1 ldi r24, 0x10 ; 16 - 1e24: 89 b9 out 0x09, r24 ; 9 - UBRR0L = (uint8_t)( (F_CPU + BAUD_RATE * 4L) / (BAUD_RATE * 8L) - 1 ); -#endif -#endif - - // Set up watchdog to trigger after 500ms - watchdogConfig(WATCHDOG_1S); - 1e26: 8e e0 ldi r24, 0x0E ; 14 - 1e28: c2 d0 rcall .+388 ; 0x1fae - - /* Set LED pin as output */ - LED_DDR |= _BV(LED); - 1e2a: bd 9a sbi 0x17, 5 ; 23 - 1e2c: 96 e0 ldi r25, 0x06 ; 6 -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - 1e2e: 20 e3 ldi r18, 0x30 ; 48 - 1e30: 3c ef ldi r19, 0xFC ; 252 - TIFR1 = _BV(TOV1); - 1e32: 54 e0 ldi r21, 0x04 ; 4 - while(!(TIFR1 & _BV(TOV1))); -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); - 1e34: 40 e2 ldi r20, 0x20 ; 32 -} - -#if LED_START_FLASHES > 0 -void flash_led(uint8_t count) { - do { - TCNT1 = -(F_CPU/(1024*16)); - 1e36: 3d bd out 0x2d, r19 ; 45 - 1e38: 2c bd out 0x2c, r18 ; 44 - TIFR1 = _BV(TOV1); - 1e3a: 58 bf out 0x38, r21 ; 56 - while(!(TIFR1 & _BV(TOV1))); - 1e3c: 08 b6 in r0, 0x38 ; 56 - 1e3e: 02 fe sbrs r0, 2 - 1e40: fd cf rjmp .-6 ; 0x1e3c -#ifdef __AVR_ATmega8__ - LED_PORT ^= _BV(LED); - 1e42: 88 b3 in r24, 0x18 ; 24 - 1e44: 84 27 eor r24, r20 - 1e46: 88 bb out 0x18, r24 ; 24 -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - 1e48: a8 95 wdr - LED_PORT ^= _BV(LED); -#else - LED_PIN |= _BV(LED); -#endif - watchdogReset(); - } while (--count); - 1e4a: 91 50 subi r25, 0x01 ; 1 - 1e4c: a1 f7 brne .-24 ; 0x1e36 - 1e4e: cc 24 eor r12, r12 - 1e50: dd 24 eor r13, r13 - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - 1e52: 88 24 eor r8, r8 - 1e54: 83 94 inc r8 - addrPtr += 2; - } while (--ch); - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - 1e56: b5 e0 ldi r27, 0x05 ; 5 - 1e58: ab 2e mov r10, r27 - boot_spm_busy_wait(); - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); - 1e5a: a1 e1 ldi r26, 0x11 ; 17 - 1e5c: 9a 2e mov r9, r26 - do *bufPtr++ = getch(); - while (--length); - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 1e5e: f3 e0 ldi r31, 0x03 ; 3 - 1e60: bf 2e mov r11, r31 -#endif - - /* Forever loop */ - for (;;) { - /* get character from UART */ - ch = getch(); - 1e62: 9e d0 rcall .+316 ; 0x1fa0 - - if(ch == STK_GET_PARAMETER) { - 1e64: 81 34 cpi r24, 0x41 ; 65 - 1e66: 61 f4 brne .+24 ; 0x1e80 - unsigned char which = getch(); - 1e68: 9b d0 rcall .+310 ; 0x1fa0 - 1e6a: 08 2f mov r16, r24 - verifySpace(); - 1e6c: a4 d0 rcall .+328 ; 0x1fb6 - if (which == 0x82) { - 1e6e: 02 38 cpi r16, 0x82 ; 130 - 1e70: 11 f0 breq .+4 ; 0x1e76 - /* - * Send optiboot version as "minor SW version" - */ - putch(OPTIBOOT_MINVER); - } else if (which == 0x81) { - 1e72: 01 38 cpi r16, 0x81 ; 129 - 1e74: 11 f4 brne .+4 ; 0x1e7a - putch(OPTIBOOT_MAJVER); - 1e76: 84 e0 ldi r24, 0x04 ; 4 - 1e78: 01 c0 rjmp .+2 ; 0x1e7c - } else { - /* - * GET PARAMETER returns a generic 0x03 reply for - * other parameters - enough to keep Avrdude happy - */ - putch(0x03); - 1e7a: 83 e0 ldi r24, 0x03 ; 3 - 1e7c: 8d d0 rcall .+282 ; 0x1f98 - 1e7e: 89 c0 rjmp .+274 ; 0x1f92 - } - } - else if(ch == STK_SET_DEVICE) { - 1e80: 82 34 cpi r24, 0x42 ; 66 - 1e82: 11 f4 brne .+4 ; 0x1e88 - // SET DEVICE is ignored - getNch(20); - 1e84: 84 e1 ldi r24, 0x14 ; 20 - 1e86: 03 c0 rjmp .+6 ; 0x1e8e - } - else if(ch == STK_SET_DEVICE_EXT) { - 1e88: 85 34 cpi r24, 0x45 ; 69 - 1e8a: 19 f4 brne .+6 ; 0x1e92 - // SET DEVICE EXT is ignored - getNch(5); - 1e8c: 85 e0 ldi r24, 0x05 ; 5 - 1e8e: 9b d0 rcall .+310 ; 0x1fc6 - 1e90: 80 c0 rjmp .+256 ; 0x1f92 - } - else if(ch == STK_LOAD_ADDRESS) { - 1e92: 85 35 cpi r24, 0x55 ; 85 - 1e94: 79 f4 brne .+30 ; 0x1eb4 - // LOAD ADDRESS - uint16_t newAddress; - newAddress = getch(); - 1e96: 84 d0 rcall .+264 ; 0x1fa0 - newAddress = (newAddress & 0xff) | (getch() << 8); - 1e98: e8 2e mov r14, r24 - 1e9a: ff 24 eor r15, r15 - 1e9c: 81 d0 rcall .+258 ; 0x1fa0 - 1e9e: 08 2f mov r16, r24 - 1ea0: 10 e0 ldi r17, 0x00 ; 0 - 1ea2: 10 2f mov r17, r16 - 1ea4: 00 27 eor r16, r16 - 1ea6: 0e 29 or r16, r14 - 1ea8: 1f 29 or r17, r15 -#ifdef RAMPZ - // Transfer top bit to RAMPZ - RAMPZ = (newAddress & 0x8000) ? 1 : 0; -#endif - newAddress += newAddress; // Convert from word address to byte address - 1eaa: 00 0f add r16, r16 - 1eac: 11 1f adc r17, r17 - address = newAddress; - verifySpace(); - 1eae: 83 d0 rcall .+262 ; 0x1fb6 - 1eb0: 68 01 movw r12, r16 - 1eb2: 6f c0 rjmp .+222 ; 0x1f92 - } - else if(ch == STK_UNIVERSAL) { - 1eb4: 86 35 cpi r24, 0x56 ; 86 - 1eb6: 21 f4 brne .+8 ; 0x1ec0 - // UNIVERSAL command is ignored - getNch(4); - 1eb8: 84 e0 ldi r24, 0x04 ; 4 - 1eba: 85 d0 rcall .+266 ; 0x1fc6 - putch(0x00); - 1ebc: 80 e0 ldi r24, 0x00 ; 0 - 1ebe: de cf rjmp .-68 ; 0x1e7c - } - /* Write memory, length is big endian and is in bytes */ - else if(ch == STK_PROG_PAGE) { - 1ec0: 84 36 cpi r24, 0x64 ; 100 - 1ec2: 09 f0 breq .+2 ; 0x1ec6 - 1ec4: 40 c0 rjmp .+128 ; 0x1f46 - // PROGRAM PAGE - we support flash programming only, not EEPROM - uint8_t *bufPtr; - uint16_t addrPtr; - - getch(); /* getlen() */ - 1ec6: 6c d0 rcall .+216 ; 0x1fa0 - length = getch(); - 1ec8: 6b d0 rcall .+214 ; 0x1fa0 - 1eca: 08 2f mov r16, r24 - getch(); - 1ecc: 69 d0 rcall .+210 ; 0x1fa0 - - // If we are in RWW section, immediately start page erase - if (address < NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 1ece: 80 e0 ldi r24, 0x00 ; 0 - 1ed0: c8 16 cp r12, r24 - 1ed2: 88 e1 ldi r24, 0x18 ; 24 - 1ed4: d8 06 cpc r13, r24 - 1ed6: 18 f4 brcc .+6 ; 0x1ede - 1ed8: f6 01 movw r30, r12 - 1eda: b7 be out 0x37, r11 ; 55 - 1edc: e8 95 spm - 1ede: c0 e0 ldi r28, 0x00 ; 0 - 1ee0: d1 e0 ldi r29, 0x01 ; 1 - - // While that is going on, read in page contents - bufPtr = buff; - do *bufPtr++ = getch(); - 1ee2: 5e d0 rcall .+188 ; 0x1fa0 - 1ee4: 89 93 st Y+, r24 - while (--length); - 1ee6: 0c 17 cp r16, r28 - 1ee8: e1 f7 brne .-8 ; 0x1ee2 - - // If we are in NRWW section, page erase has to be delayed until now. - // Todo: Take RAMPZ into account - if (address >= NRWWSTART) __boot_page_erase_short((uint16_t)(void*)address); - 1eea: f0 e0 ldi r31, 0x00 ; 0 - 1eec: cf 16 cp r12, r31 - 1eee: f8 e1 ldi r31, 0x18 ; 24 - 1ef0: df 06 cpc r13, r31 - 1ef2: 18 f0 brcs .+6 ; 0x1efa - 1ef4: f6 01 movw r30, r12 - 1ef6: b7 be out 0x37, r11 ; 55 - 1ef8: e8 95 spm - - // Read command terminator, start reply - verifySpace(); - 1efa: 5d d0 rcall .+186 ; 0x1fb6 - - // If only a partial page is to be programmed, the erase might not be complete. - // So check that here - boot_spm_busy_wait(); - 1efc: 07 b6 in r0, 0x37 ; 55 - 1efe: 00 fc sbrc r0, 0 - 1f00: fd cf rjmp .-6 ; 0x1efc - 1f02: a6 01 movw r20, r12 - 1f04: a0 e0 ldi r26, 0x00 ; 0 - 1f06: b1 e0 ldi r27, 0x01 ; 1 - bufPtr = buff; - addrPtr = (uint16_t)(void*)address; - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - 1f08: 2c 91 ld r18, X - 1f0a: 30 e0 ldi r19, 0x00 ; 0 - a |= (*bufPtr++) << 8; - 1f0c: 11 96 adiw r26, 0x01 ; 1 - 1f0e: 8c 91 ld r24, X - 1f10: 11 97 sbiw r26, 0x01 ; 1 - 1f12: 90 e0 ldi r25, 0x00 ; 0 - 1f14: 98 2f mov r25, r24 - 1f16: 88 27 eor r24, r24 - 1f18: 82 2b or r24, r18 - 1f1a: 93 2b or r25, r19 -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 1f1c: 12 96 adiw r26, 0x02 ; 2 - ch = SPM_PAGESIZE / 2; - do { - uint16_t a; - a = *bufPtr++; - a |= (*bufPtr++) << 8; - __boot_page_fill_short((uint16_t)(void*)addrPtr,a); - 1f1e: fa 01 movw r30, r20 - 1f20: 0c 01 movw r0, r24 - 1f22: 87 be out 0x37, r8 ; 55 - 1f24: e8 95 spm - 1f26: 11 24 eor r1, r1 - addrPtr += 2; - 1f28: 4e 5f subi r20, 0xFE ; 254 - 1f2a: 5f 4f sbci r21, 0xFF ; 255 - } while (--ch); - 1f2c: f1 e0 ldi r31, 0x01 ; 1 - 1f2e: a0 34 cpi r26, 0x40 ; 64 - 1f30: bf 07 cpc r27, r31 - 1f32: 51 f7 brne .-44 ; 0x1f08 - - // Write from programming buffer - __boot_page_write_short((uint16_t)(void*)address); - 1f34: f6 01 movw r30, r12 - 1f36: a7 be out 0x37, r10 ; 55 - 1f38: e8 95 spm - boot_spm_busy_wait(); - 1f3a: 07 b6 in r0, 0x37 ; 55 - 1f3c: 00 fc sbrc r0, 0 - 1f3e: fd cf rjmp .-6 ; 0x1f3a - -#if defined(RWWSRE) - // Reenable read access to flash - boot_rww_enable(); - 1f40: 97 be out 0x37, r9 ; 55 - 1f42: e8 95 spm - 1f44: 26 c0 rjmp .+76 ; 0x1f92 -#endif - - } - /* Read memory block mode, length is big endian. */ - else if(ch == STK_READ_PAGE) { - 1f46: 84 37 cpi r24, 0x74 ; 116 - 1f48: b1 f4 brne .+44 ; 0x1f76 - // READ PAGE - we only read flash - getch(); /* getlen() */ - 1f4a: 2a d0 rcall .+84 ; 0x1fa0 - length = getch(); - 1f4c: 29 d0 rcall .+82 ; 0x1fa0 - 1f4e: f8 2e mov r15, r24 - getch(); - 1f50: 27 d0 rcall .+78 ; 0x1fa0 - - verifySpace(); - 1f52: 31 d0 rcall .+98 ; 0x1fb6 - 1f54: f6 01 movw r30, r12 - 1f56: ef 2c mov r14, r15 - putch(result); - address++; - } - while (--length); -#else - do putch(pgm_read_byte_near(address++)); - 1f58: 8f 01 movw r16, r30 - 1f5a: 0f 5f subi r16, 0xFF ; 255 - 1f5c: 1f 4f sbci r17, 0xFF ; 255 - 1f5e: 84 91 lpm r24, Z+ - 1f60: 1b d0 rcall .+54 ; 0x1f98 - while (--length); - 1f62: ea 94 dec r14 - 1f64: f8 01 movw r30, r16 - 1f66: c1 f7 brne .-16 ; 0x1f58 -#define rstVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+4)) -#define wdtVect (*(uint16_t*)(RAMSTART+SPM_PAGESIZE*2+6)) -#endif - -/* main program starts here */ -int main(void) { - 1f68: 08 94 sec - 1f6a: c1 1c adc r12, r1 - 1f6c: d1 1c adc r13, r1 - 1f6e: fa 94 dec r15 - 1f70: cf 0c add r12, r15 - 1f72: d1 1c adc r13, r1 - 1f74: 0e c0 rjmp .+28 ; 0x1f92 -#endif -#endif - } - - /* Get device signature bytes */ - else if(ch == STK_READ_SIGN) { - 1f76: 85 37 cpi r24, 0x75 ; 117 - 1f78: 39 f4 brne .+14 ; 0x1f88 - // READ SIGN - return what Avrdude wants to hear - verifySpace(); - 1f7a: 1d d0 rcall .+58 ; 0x1fb6 - putch(SIGNATURE_0); - 1f7c: 8e e1 ldi r24, 0x1E ; 30 - 1f7e: 0c d0 rcall .+24 ; 0x1f98 - putch(SIGNATURE_1); - 1f80: 83 e9 ldi r24, 0x93 ; 147 - 1f82: 0a d0 rcall .+20 ; 0x1f98 - putch(SIGNATURE_2); - 1f84: 87 e0 ldi r24, 0x07 ; 7 - 1f86: 7a cf rjmp .-268 ; 0x1e7c - } - else if (ch == 'Q') { - 1f88: 81 35 cpi r24, 0x51 ; 81 - 1f8a: 11 f4 brne .+4 ; 0x1f90 - // Adaboot no-wait mod - watchdogConfig(WATCHDOG_16MS); - 1f8c: 88 e0 ldi r24, 0x08 ; 8 - 1f8e: 0f d0 rcall .+30 ; 0x1fae - verifySpace(); - } - else { - // This covers the response to commands like STK_ENTER_PROGMODE - verifySpace(); - 1f90: 12 d0 rcall .+36 ; 0x1fb6 - } - putch(STK_OK); - 1f92: 80 e1 ldi r24, 0x10 ; 16 - 1f94: 01 d0 rcall .+2 ; 0x1f98 - 1f96: 65 cf rjmp .-310 ; 0x1e62 - -00001f98 : - } -} - -void putch(char ch) { -#ifndef SOFT_UART - while (!(UCSR0A & _BV(UDRE0))); - 1f98: 5d 9b sbis 0x0b, 5 ; 11 - 1f9a: fe cf rjmp .-4 ; 0x1f98 - UDR0 = ch; - 1f9c: 8c b9 out 0x0c, r24 ; 12 - [uartBit] "I" (UART_TX_BIT) - : - "r25" - ); -#endif -} - 1f9e: 08 95 ret - -00001fa0 : - [uartBit] "I" (UART_RX_BIT) - : - "r25" -); -#else - while(!(UCSR0A & _BV(RXC0))) - 1fa0: 5f 9b sbis 0x0b, 7 ; 11 - 1fa2: fe cf rjmp .-4 ; 0x1fa0 - ; - if (!(UCSR0A & _BV(FE0))) { - 1fa4: 5c 99 sbic 0x0b, 4 ; 11 - 1fa6: 01 c0 rjmp .+2 ; 0x1faa -} -#endif - -// Watchdog functions. These are only safe with interrupts turned off. -void watchdogReset() { - __asm__ __volatile__ ( - 1fa8: a8 95 wdr - * don't care that an invalid char is returned...) - */ - watchdogReset(); - } - - ch = UDR0; - 1faa: 8c b1 in r24, 0x0c ; 12 - LED_PIN |= _BV(LED); -#endif -#endif - - return ch; -} - 1fac: 08 95 ret - -00001fae : - "wdr\n" - ); -} - -void watchdogConfig(uint8_t x) { - WDTCSR = _BV(WDCE) | _BV(WDE); - 1fae: 98 e1 ldi r25, 0x18 ; 24 - 1fb0: 91 bd out 0x21, r25 ; 33 - WDTCSR = x; - 1fb2: 81 bd out 0x21, r24 ; 33 -} - 1fb4: 08 95 ret - -00001fb6 : - do getch(); while (--count); - verifySpace(); -} - -void verifySpace() { - if (getch() != CRC_EOP) { - 1fb6: f4 df rcall .-24 ; 0x1fa0 - 1fb8: 80 32 cpi r24, 0x20 ; 32 - 1fba: 19 f0 breq .+6 ; 0x1fc2 - watchdogConfig(WATCHDOG_16MS); // shorten WD timeout - 1fbc: 88 e0 ldi r24, 0x08 ; 8 - 1fbe: f7 df rcall .-18 ; 0x1fae - 1fc0: ff cf rjmp .-2 ; 0x1fc0 - while (1) // and busy-loop so that WD causes - ; // a reset and app start. - } - putch(STK_INSYNC); - 1fc2: 84 e1 ldi r24, 0x14 ; 20 -} - 1fc4: e9 cf rjmp .-46 ; 0x1f98 - -00001fc6 : - ::[count] "M" (UART_B_VALUE) - ); -} -#endif - -void getNch(uint8_t count) { - 1fc6: 1f 93 push r17 - 1fc8: 18 2f mov r17, r24 - do getch(); while (--count); - 1fca: ea df rcall .-44 ; 0x1fa0 - 1fcc: 11 50 subi r17, 0x01 ; 1 - 1fce: e9 f7 brne .-6 ; 0x1fca - verifySpace(); - 1fd0: f2 df rcall .-28 ; 0x1fb6 -} - 1fd2: 1f 91 pop r17 - 1fd4: 08 95 ret - -00001fd6 : - WDTCSR = _BV(WDCE) | _BV(WDE); - WDTCSR = x; -} - -void appStart() { - watchdogConfig(WATCHDOG_OFF); - 1fd6: 80 e0 ldi r24, 0x00 ; 0 - 1fd8: ea df rcall .-44 ; 0x1fae - __asm__ __volatile__ ( - 1fda: ee 27 eor r30, r30 - 1fdc: ff 27 eor r31, r31 - 1fde: 09 94 ijmp diff --git a/bootloaders/optiboot/pin_defs.h b/bootloaders/optiboot/pin_defs.h deleted file mode 100644 index 61ce64ee..00000000 --- a/bootloaders/optiboot/pin_defs.h +++ /dev/null @@ -1,80 +0,0 @@ -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega88) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega88__) -/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -#define LED PINB5 - -/* Ports for soft UART */ -#ifdef SOFT_UART -#define UART_PORT PORTD -#define UART_PIN PIND -#define UART_DDR DDRD -#define UART_TX_BIT 1 -#define UART_RX_BIT 0 -#endif -#endif - -#if defined(__AVR_ATmega8__) - //Name conversion R.Wiersma - #define UCSR0A UCSRA - #define UDR0 UDR - #define UDRE0 UDRE - #define RXC0 RXC - #define FE0 FE - #define TIFR1 TIFR - #define WDTCSR WDTCR -#endif - -/* Luminet support */ -#if defined(__AVR_ATtiny84__) -/* Red LED is connected to pin PA4 */ -#define LED_DDR DDRA -#define LED_PORT PORTA -#define LED_PIN PINA -#define LED PINA4 -/* Ports for soft UART - left port only for now. TX/RX on PA2/PA3 */ -#ifdef SOFT_UART -#define UART_PORT PORTA -#define UART_PIN PINA -#define UART_DDR DDRA -#define UART_TX_BIT 2 -#define UART_RX_BIT 3 -#endif -#endif - -/* Sanguino support */ -#if defined(__AVR_ATmega644P__) -/* Onboard LED is connected to pin PB0 on Sanguino */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -#define LED PINB0 - -/* Ports for soft UART */ -#ifdef SOFT_UART -#define UART_PORT PORTD -#define UART_PIN PIND -#define UART_DDR DDRD -#define UART_TX_BIT 1 -#define UART_RX_BIT 0 -#endif -#endif - -/* Mega support */ -#if defined(__AVR_ATmega1280__) -/* Onboard LED is connected to pin PB7 on Arduino Mega */ -#define LED_DDR DDRB -#define LED_PORT PORTB -#define LED_PIN PINB -#define LED PINB7 - -/* Ports for soft UART */ -#ifdef SOFT_UART -#define UART_PORT PORTE -#define UART_PIN PINE -#define UART_DDR DDRE -#define UART_TX_BIT 1 -#define UART_RX_BIT 0 -#endif -#endif diff --git a/bootloaders/optiboot/stk500.h b/bootloaders/optiboot/stk500.h deleted file mode 100644 index ca0dd91d..00000000 --- a/bootloaders/optiboot/stk500.h +++ /dev/null @@ -1,39 +0,0 @@ -/* STK500 constants list, from AVRDUDE */ -#define STK_OK 0x10 -#define STK_FAILED 0x11 // Not used -#define STK_UNKNOWN 0x12 // Not used -#define STK_NODEVICE 0x13 // Not used -#define STK_INSYNC 0x14 // ' ' -#define STK_NOSYNC 0x15 // Not used -#define ADC_CHANNEL_ERROR 0x16 // Not used -#define ADC_MEASURE_OK 0x17 // Not used -#define PWM_CHANNEL_ERROR 0x18 // Not used -#define PWM_ADJUST_OK 0x19 // Not used -#define CRC_EOP 0x20 // 'SPACE' -#define STK_GET_SYNC 0x30 // '0' -#define STK_GET_SIGN_ON 0x31 // '1' -#define STK_SET_PARAMETER 0x40 // '@' -#define STK_GET_PARAMETER 0x41 // 'A' -#define STK_SET_DEVICE 0x42 // 'B' -#define STK_SET_DEVICE_EXT 0x45 // 'E' -#define STK_ENTER_PROGMODE 0x50 // 'P' -#define STK_LEAVE_PROGMODE 0x51 // 'Q' -#define STK_CHIP_ERASE 0x52 // 'R' -#define STK_CHECK_AUTOINC 0x53 // 'S' -#define STK_LOAD_ADDRESS 0x55 // 'U' -#define STK_UNIVERSAL 0x56 // 'V' -#define STK_PROG_FLASH 0x60 // '`' -#define STK_PROG_DATA 0x61 // 'a' -#define STK_PROG_FUSE 0x62 // 'b' -#define STK_PROG_LOCK 0x63 // 'c' -#define STK_PROG_PAGE 0x64 // 'd' -#define STK_PROG_FUSE_EXT 0x65 // 'e' -#define STK_READ_FLASH 0x70 // 'p' -#define STK_READ_DATA 0x71 // 'q' -#define STK_READ_FUSE 0x72 // 'r' -#define STK_READ_LOCK 0x73 // 's' -#define STK_READ_PAGE 0x74 // 't' -#define STK_READ_SIGN 0x75 // 'u' -#define STK_READ_OSCCAL 0x76 // 'v' -#define STK_READ_FUSE_EXT 0x77 // 'w' -#define STK_READ_OSCCAL_EXT 0x78 // 'x' diff --git a/bootloaders/stk500v2/License.txt b/bootloaders/stk500v2/License.txt deleted file mode 100644 index e7dcdd8d..00000000 --- a/bootloaders/stk500v2/License.txt +++ /dev/null @@ -1,280 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 - - Copyright (C) 1989, 1991 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -License is intended to guarantee your freedom to share and change free -software--to make sure the software is free for all its users. This -General Public License applies to most of the Free Software -Foundation's software and to any other program whose authors commit to -using it. (Some other Free Software Foundation software is covered by -the GNU Library General Public License instead.) You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -this service if you wish), that you receive source code or can get it -if you want it, that you can change the software or use pieces of it -in new free programs; and that you know you can do these things. - - To protect your rights, we need to make restrictions that forbid -anyone to deny you these rights or to ask you to surrender the rights. -These restrictions translate to certain responsibilities for you if you -distribute copies of the software, or if you modify it. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must give the recipients all the rights that -you have. You must make sure that they, too, receive or can get the -source code. And you must show them these terms so they know their -rights. - - We protect your rights with two steps: (1) copyright the software, and -(2) offer you this license which gives you legal permission to copy, -distribute and/or modify the software. - - Also, for each author's protection and ours, we want to make certain -that everyone understands that there is no warranty for this free -software. If the software is modified by someone else and passed on, we -want its recipients to know that what they have is not the original, so -that any problems introduced by others will not reflect on the original -authors' reputations. - - Finally, any free program is threatened constantly by software -patents. We wish to avoid the danger that redistributors of a free -program will individually obtain patent licenses, in effect making the -program proprietary. To prevent this, we have made it clear that any -patent must be licensed for everyone's free use or not licensed at all. - - The precise terms and conditions for copying, distribution and -modification follow. - - GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License applies to any program or other work which contains -a notice placed by the copyright holder saying it may be distributed -under the terms of this General Public License. The "Program", below, -refers to any such program or work, and a "work based on the Program" -means either the Program or any derivative work under copyright law: -that is to say, a work containing the Program or a portion of it, -either verbatim or with modifications and/or translated into another -language. (Hereinafter, translation is included without limitation in -the term "modification".) Each licensee is addressed as "you". - -Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running the Program is not restricted, and the output from the Program -is covered only if its contents constitute a work based on the -Program (independent of having been made by running the Program). -Whether that is true depends on what the Program does. - - 1. You may copy and distribute verbatim copies of the Program's -source code as you receive it, in any medium, provided that you -conspicuously and appropriately publish on each copy an appropriate -copyright notice and disclaimer of warranty; keep intact all the -notices that refer to this License and to the absence of any warranty; -and give any other recipients of the Program a copy of this License -along with the Program. - -You may charge a fee for the physical act of transferring a copy, and -you may at your option offer warranty protection in exchange for a fee. - - 2. You may modify your copy or copies of the Program or any portion -of it, thus forming a work based on the Program, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) You must cause the modified files to carry prominent notices - stating that you changed the files and the date of any change. - - b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any - part thereof, to be licensed as a whole at no charge to all third - parties under the terms of this License. - - c) If the modified program normally reads commands interactively - when run, you must cause it, when started running for such - interactive use in the most ordinary way, to print or display an - announcement including an appropriate copyright notice and a - notice that there is no warranty (or else, saying that you provide - a warranty) and that users may redistribute the program under - these conditions, and telling the user how to view a copy of this - License. (Exception: if the Program itself is interactive but - does not normally print such an announcement, your work based on - the Program is not required to print an announcement.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Program, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Program, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Program. - -In addition, mere aggregation of another work not based on the Program -with the Program (or with a work based on the Program) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may copy and distribute the Program (or a work based on it, -under Section 2) in object code or executable form under the terms of -Sections 1 and 2 above provided that you also do one of the following: - - a) Accompany it with the complete corresponding machine-readable - source code, which must be distributed under the terms of Sections - 1 and 2 above on a medium customarily used for software interchange; or, - - b) Accompany it with a written offer, valid for at least three - years, to give any third party, for a charge no more than your - cost of physically performing source distribution, a complete - machine-readable copy of the corresponding source code, to be - distributed under the terms of Sections 1 and 2 above on a medium - customarily used for software interchange; or, - - c) Accompany it with the information you received as to the offer - to distribute corresponding source code. (This alternative is - allowed only for noncommercial distribution and only if you - received the program in object code or executable form with such - an offer, in accord with Subsection b above.) - -The source code for a work means the preferred form of the work for -making modifications to it. For an executable work, complete source -code means all the source code for all modules it contains, plus any -associated interface definition files, plus the scripts used to -control compilation and installation of the executable. However, as a -special exception, the source code distributed need not include -anything that is normally distributed (in either source or binary -form) with the major components (compiler, kernel, and so on) of the -operating system on which the executable runs, unless that component -itself accompanies the executable. - -If distribution of executable or object code is made by offering -access to copy from a designated place, then offering equivalent -access to copy the source code from the same place counts as -distribution of the source code, even though third parties are not -compelled to copy the source along with the object code. - - 4. You may not copy, modify, sublicense, or distribute the Program -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense or distribute the Program is -void, and will automatically terminate your rights under this License. -However, parties who have received copies, or rights, from you under -this License will not have their licenses terminated so long as such -parties remain in full compliance. - - 5. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Program or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Program (or any work based on the -Program), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Program or works based on it. - - 6. Each time you redistribute the Program (or any work based on the -Program), the recipient automatically receives a license from the -original licensor to copy, distribute or modify the Program subject to -these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties to -this License. - - 7. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Program at all. For example, if a patent -license would not permit royalty-free redistribution of the Program by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Program. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system, which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 8. If the distribution and/or use of the Program is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Program under this License -may add an explicit geographical distribution limitation excluding -those countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 9. The Free Software Foundation may publish revised and/or new versions -of the General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - -Each version is given a distinguishing version number. If the Program -specifies a version number of this License which applies to it and "any -later version", you have the option of following the terms and conditions -either of that version or of any later version published by the Free -Software Foundation. If the Program does not specify a version number of -this License, you may choose any version ever published by the Free Software -Foundation. - - 10. If you wish to incorporate parts of the Program into other free -programs whose distribution conditions are different, write to the author -to ask for permission. For software which is copyrighted by the Free -Software Foundation, write to the Free Software Foundation; we sometimes -make exceptions for this. Our decision will be guided by the two goals -of preserving the free status of all derivatives of our free software and -of promoting the sharing and reuse of software generally. - - NO WARRANTY - - 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, -REPAIR OR CORRECTION. - - 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE -POSSIBILITY OF SUCH DAMAGES. - - END OF TERMS AND CONDITIONS diff --git a/bootloaders/stk500v2/Makefile b/bootloaders/stk500v2/Makefile deleted file mode 100644 index eeb9add0..00000000 --- a/bootloaders/stk500v2/Makefile +++ /dev/null @@ -1,587 +0,0 @@ -# ---------------------------------------------------------------------------- -# Makefile to compile and link stk500boot bootloader -# Author: Peter Fleury -# based on WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# -# Adjust F_CPU below to the clock frequency in Mhz of your AVR target -# Adjust BOOTLOADER_ADDRESS to your AVR target -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- -# = Mark Sproul msproul-at-skychariot.com - - -# MCU name -#MCU = atmega128 - - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -#F_CPU = 16000000 - - -# Bootloader -# Please adjust if using a different AVR -# 0x0e00*2=0x1C00 for ATmega8 512 words Boot Size -# 0xFC00*2=0x1F800 for ATmega128 1024 words Boot Size -# 0xF800*2=0x1F000 for ATmega1280 -# 0xF000*2=0x1E000 for ATmega1280 -#BOOTLOADER_ADDRESS = 1E000 - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Target file name (without extension). -TARGET = stk500boot - - -# List C source files here. (C dependencies are automatically generated.) -SRC = stk500boot.c - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s - - -# Debugging format. -# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. -# AVR Studio 4.10 requires dwarf-2. -# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. -DEBUG = dwarf-2 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu99 - - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU)UL - - -# Place -I options here -CINCS = - - - -#---------------- Compiler Options ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) $(CINCS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -fno-jump-tables -CFLAGS += -Wall -Wstrict-prototypes -CFLAGS += -Wa,-adhlns=$(<:.c=.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -ahlms: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs - - -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm - - - -#---------------- External Memory Options ---------------- - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# used for variables (.data/.bss) and heap (malloc()). -#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# only used for heap (malloc()). -#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff - -EXTMEMOPTS = - - - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += $(EXTMEMOPTS) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) - - -#--------------- bootloader linker Options ------- -# BOOTLOADER_ADDRESS (=Start of Boot Loader section -# in bytes - not words) is defined above. -#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles -nodefaultlibs -#LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) -nostartfiles -LDFLAGS += -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS) - -#---------------- Programming Options (avrdude) ---------------- - -# Programming hardware: alf avr910 avrisp bascom bsd -# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500 -# -# Type: avrdude -c ? -# to get a full listing. -# -AVRDUDE_PROGRAMMER = stk500v2 - -# com1 = serial port. Use lpt1 to connect to parallel port. -AVRDUDE_PORT = com1 # programmer connected to serial device - -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -#---------------- Debugging Options ---------------- - -# For simulavr only - target MCU frequency. -DEBUG_MFREQ = $(F_CPU) - -# Set the DEBUG_UI to either gdb or insight. -# DEBUG_UI = gdb -DEBUG_UI = insight - -# Set the debugging back-end to either avarice, simulavr. -DEBUG_BACKEND = avarice -#DEBUG_BACKEND = simulavr - -# GDB Init Filename. -GDBINIT_FILE = __avr_gdbinit - -# When using avarice settings for the JTAG -JTAG_DEV = /dev/com1 - -# Debugging port used to communicate between GDB / avarice / simulavr. -DEBUG_PORT = 4242 - -# Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when -# avarice is running on a different computer. -DEBUG_HOST = localhost - - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -COPY = cp -WINSHELL = cmd - - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: - - - - -# Define all object files. -OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) - -# Define all listing files. -LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) - - -# Compiler flags to generate dependency files. -GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - -############################################################ -# May 25, 2010 Adding 1280 support -mega1280: MCU = atmega1280 -mega1280: F_CPU = 16000000 -mega1280: BOOTLOADER_ADDRESS = 1E000 -mega1280: CFLAGS += -D_MEGA_BOARD_ -mega1280: begin gccversion sizebefore build sizeafter end - mv $(TARGET).hex stk500boot_v2_mega1280.hex - - -############################################################ -# Jul 6, 2010 Adding 2560 support -mega2560: MCU = atmega2560 -mega2560: F_CPU = 16000000 -mega2560: BOOTLOADER_ADDRESS = 3E000 -mega2560: CFLAGS += -D_MEGA_BOARD_ -mega2560: begin gccversion sizebefore build sizeafter end - mv $(TARGET).hex stk500boot_v2_mega2560.hex - - -############################################################ -#Initial config on Amber128 board -# avrdude: Device signature = 0x1e9702 -# avrdude: safemode: lfuse reads as 8F -# avrdude: safemode: hfuse reads as CB -# avrdude: safemode: efuse reads as FF -# Jul 17, 2010 Adding 128 support -############################################################ -amber128: MCU = atmega128 -#amber128: F_CPU = 16000000 -amber128: F_CPU = 14745600 -amber128: BOOTLOADER_ADDRESS = 1E000 -amber128: CFLAGS += -D_BOARD_AMBER128_ -amber128: begin gccversion sizebefore build sizeafter end - mv $(TARGET).hex stk500boot_v2_amber128.hex - -############################################################ -# Aug 23, 2010 Adding atmega2561 support -m2561: MCU = atmega2561 -m2561: F_CPU = 8000000 -m2561: BOOTLOADER_ADDRESS = 3E000 -m2561: CFLAGS += -D_ANDROID_2561_ -DBAUDRATE=57600 -m2561: begin gccversion sizebefore build sizeafter end - mv $(TARGET).hex stk500boot_v2_android2561.hex - - -############################################################ -# avrdude: Device signature = 0x1e9801 -# avrdude: safemode: lfuse reads as EC -# avrdude: safemode: hfuse reads as 18 -# avrdude: safemode: efuse reads as FD -# Aug 23, 2010 Adding cerebot 2560 @ 8mhz -#avrdude -P usb -c usbtiny -p m2560 -v -U flash:w:/Arduino/WiringBootV2_upd1/stk500boot_v2_cerebotplus.hex -############################################################ -cerebot: MCU = atmega2560 -cerebot: F_CPU = 8000000 -cerebot: BOOTLOADER_ADDRESS = 3E000 -cerebot: CFLAGS += -D_CEREBOTPLUS_BOARD_ -DBAUDRATE=38400 -DUART_BAUDRATE_DOUBLE_SPEED=1 -cerebot: begin gccversion sizebefore build sizeafter end - mv $(TARGET).hex stk500boot_v2_cerebotplus.hex - - -############################################################ -# Aug 23, 2010 Adding atmega2561 support -penguino: MCU = atmega32 -penguino: F_CPU = 16000000 -penguino: BOOTLOADER_ADDRESS = 7800 -penguino: CFLAGS += -D_PENGUINO_ -DBAUDRATE=57600 -penguino: begin gccversion sizebefore build sizeafter end - mv $(TARGET).hex stk500boot_v2_penguino.hex - - -# Default target. -all: begin gccversion sizebefore build sizeafter end - -build: elf hex eep lss sym -#build: hex eep lss sym - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -ELFSIZE = $(SIZE) --format=avr --mcu=$(MCU) $(TARGET).elf - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - - -# Display compiler version information. -gccversion : - @$(CC) --version - - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - - -# Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set -# a breakpoint at main(). -gdb-config: - @$(REMOVE) $(GDBINIT_FILE) - @echo define reset >> $(GDBINIT_FILE) - @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) - @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) - @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) -ifeq ($(DEBUG_BACKEND),simulavr) - @echo load >> $(GDBINIT_FILE) -endif - @echo break main >> $(GDBINIT_FILE) - -debug: gdb-config $(TARGET).elf -ifeq ($(DEBUG_BACKEND), avarice) - @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. - @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) - @$(WINSHELL) /c pause - -else - @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ - $(DEBUG_MFREQ) --port $(DEBUG_PORT) -endif - @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - - - -coff: $(TARGET).elf - @echo - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof - - -extcoff: $(TARGET).elf - @echo - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof - - -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -%.eep: %.elf - @echo - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ - -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S $< > $@ - -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - - -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ - - -# Target: clean project. -clean: begin clean_list end - -clean_list : - @echo - @echo $(MSG_CLEANING) - $(REMOVE) *.hex - $(REMOVE) *.eep - $(REMOVE) *.cof - $(REMOVE) *.elf - $(REMOVE) *.map - $(REMOVE) *.sym - $(REMOVE) *.lss - $(REMOVE) $(OBJ) - $(REMOVE) $(LST) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) .dep/* - - - -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - - -# Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff \ -clean clean_list program debug gdb-config - diff --git a/bootloaders/stk500v2/Mega2560-prod-firmware-2011-06-29.hex b/bootloaders/stk500v2/Mega2560-prod-firmware-2011-06-29.hex deleted file mode 100644 index 4f366997..00000000 --- a/bootloaders/stk500v2/Mega2560-prod-firmware-2011-06-29.hex +++ /dev/null @@ -1,513 +0,0 @@ -:020000023000CC -:10E000000D94F6F20D941FF30D941FF30D941FF36E -:10E010000D941FF30D941FF30D941FF30D941FF334 -:10E020000D941FF30D941FF30D941FF30D941FF324 -:10E030000D941FF30D941FF30D941FF30D941FF314 -:10E040000D941FF30D941FF30D941FF30D941FF304 -:10E050000D941FF30D941FF30D941FF30D941FF3F4 -:10E060000D941FF30D941FF30D941FF30D941FF3E4 -:10E070000D941FF30D941FF30D941FF30D941FF3D4 -:10E080000D941FF30D941FF30D941FF30D941FF3C4 -:10E090000D941FF30D941FF30D941FF30D941FF3B4 -:10E0A0000D941FF30D941FF30D941FF30D941FF3A4 -:10E0B0000D941FF30D941FF30D941FF30D941FF394 -:10E0C0000D941FF30D941FF30D941FF30D941FF384 -:10E0D0000D941FF30D941FF30D941FF30D941FF374 -:10E0E0000D941FF341546D65676132353630004140 -:10E0F000726475696E6F206578706C6F72657220DE -:10E1000073746B3530305632206279204D4C530099 -:10E11000426F6F746C6F616465723E004875683F52 -:10E1200000436F6D70696C6564206F6E20203D2028 -:10E1300000435055205479706520202020203D2038 -:10E14000005F5F4156525F415243485F5F203D2070 -:10E1500000415652204C69624320566572203D2092 -:10E16000004743432056657273696F6E20203D203F -:10E1700000435055207369676E61747572653D2068 -:10E18000004C6F77206675736520202020203D208D -:10E1900000486967682066757365202020203D204F -:10E1A00000457874206675736520202020203D206E -:10E1B000004C6F636B2066757365202020203D2026 -:10E1C00000536570202039203230313000312E3636 -:10E1D0002E3700342E332E33005623202020414486 -:10E1E00044522020206F7020636F6465202020201F -:10E1F00020696E737472756374696F6E20616464F4 -:10E2000072202020496E74657272757074006E6F92 -:10E2100020766563746F7200726A6D702020006AE8 -:10E220006D7020005768617420706F72743A0050EE -:10E230006F7274206E6F7420737570706F72746576 -:10E2400064004D7573742062652061206C65747480 -:10E2500065720020005772697474696E67204545C5 -:10E260000052656164696E6720454500656570729E -:10E270006F6D206572726F7220636F756E743D00F2 -:10E28000504F525400303D5A65726F206164647281 -:10E290006573732063747273003F3D435055207360 -:10E2A0007461747300403D454550524F4D20746574 -:10E2B000737400423D426C696E6B204C45440045CE -:10E2C0003D44756D7020454550524F4D00463D44CC -:10E2D000756D7020464C41534800483D48656C7050 -:10E2E000004C3D4C69737420492F4F20506F72745D -:10E2F0007300513D517569742026206A756D702038 -:10E30000746F20757365722070676D00523D44759F -:10E310006D702052414D00563D73686F7720696ED5 -:10E320007465727275707420566563746F727300D1 -:10E33000593D506F727420626C696E6B002A0052F6 -:10E340004553455400494E543000494E543100491C -:10E350004E543200494E543300494E543400494E15 -:10E36000543500494E543600494E54370050434905 -:10E370004E5430005043494E5431005043494E549E -:10E3800032005744540054494D45523020434F4DBC -:10E3900050410054494D45523020434F4D504200AA -:10E3A00054494D455230204F56460054494D455230 -:10E3B0003120434150540054494D45523120434F80 -:10E3C0004D50410054494D45523120434F4D50422C -:10E3D0000054494D45523120434F4D50430054495C -:10E3E0004D455231204F56460054494D455232203A -:10E3F000434F4D50410054494D45523220434F4DFB -:10E4000050420054494D455232204F56460054491F -:10E410004D45523320434150540054494D455233E9 -:10E4200020434F4D50410054494D45523320434FF6 -:10E430004D50420054494D45523320434F4D5043B7 -:10E440000054494D455233204F56460054494D45DE -:10E45000523420434150540054494D4552342043D6 -:10E460004F4D50410054494D45523420434F4D507B -:10E47000420054494D45523420434F4D50430054BF -:10E48000494D455234204F56460054494D4552356A -:10E4900020434150540054494D45523520434F4D7F -:10E4A00050410054494D45523520434F4D50420094 -:10E4B00054494D45523520434F4D50430054494D2A -:10E4C000455235204F564600555341525430205244 -:10E4D000580055534152543020554452450055532D -:10E4E0004152543020545800555341525431205217 -:10E4F000580055534152543120554452450055530C -:10E5000041525431205458005553415254322052F4 -:10E5100058005553415254322055445245005553EA -:10E5200041525432205458005553415254332052D2 -:10E5300058005553415254332055445245005553C9 -:10E5400041525433205458005350492053544300EF -:10E5500041444300414E414C4F4720434F4D5000F2 -:10E560004545205245414459005457490053504DA8 -:10E57000205245414459002A003FE345E34AE34F16 -:10E58000E354E359E35EE363E368E36DE374E37B41 -:10E59000E382E3E9E3F6E303E4ABE3B7E3C4E3D107 -:10E5A000E3DEE386E393E3A0E348E5C8E4D2E4DEF8 -:10E5B000E454E550E560E50EE41AE427E434E44170 -:10E5C000E4E8E4F2E4FEE469E56DE54CE458E46572 -:10E5D000E472E47FE48AE496E4A3E4B0E4BDE408F2 -:10E5E000E512E51EE528E532E53EE50011241FBEF3 -:10E5F000CFEFD1E2DEBFCDBF01E00CBF12E0A0E063 -:10E60000B2E0EAEDFFEF03E00BBF02C007900D920E -:10E61000A030B107D9F712E0A0E0B2E001C01D922E -:10E62000AC30B107E1F70F94FBF40D94EBFF01E27E -:10E630000EBF0FEF0DBF11241FBE0D94FBF40D9400 -:10E6400000F020E030E040ED57E005C0FA013197DE -:10E65000F1F72F5F3F4F28173907C0F308959C014A -:10E66000442737FD4095542FDA01C901860F911DCB -:10E67000A11DB11DABBFFC018791882369F0809378 -:10E68000C6008091C00086FFFCCF8091C0008064EE -:10E690008093C0006F5FE8CF08958DE08093C6003F -:10E6A0008091C00086FFFCCF8091C0008064809381 -:10E6B000C0008AE08093C6008091C00086FFFCCF36 -:10E6C0008091C00080648093C00008950F942FF360 -:10E6D0000F944DF30895FC019081992359F0909384 -:10E6E000C6008091C00086FFFCCF8091C00080648E -:10E6F0008093C0003196992379F70895282F982F99 -:10E7000092959F70892F805D8A3308F0895F80938E -:10E71000C6008091C00086FFFCCF8091C00080645D -:10E720008093C000822F8F70982F905D9A3308F0ED -:10E73000995F9093C6008091C00086FFFCCF8091C6 -:10E74000C00080648093C00008959C01FB01853661 -:10E7500091051CF46330710594F0C90164E670E022 -:10E760000F948CFF605D7F4F6093C6008091C00066 -:10E7700086FFFCCF8091C00080648093C0002B3066 -:10E78000310514F43297B4F0C90164E670E00F94D7 -:10E790008CFF6AE070E00F948CFF605D7F4F6093A8 -:10E7A000C6008091C00086FFFCCF8091C0008064CD -:10E7B0008093C000C9016AE070E00F948CFFC0969E -:10E7C0008093C6008091C00086FFFCCF8091C0007E -:10E7D00080648093C0000895282F277020642093C0 -:10E7E0007C0020917B0086958695869590E08170CF -:10E7F000907033E0880F991F3A95E1F7277F282B17 -:10E8000020937B0080917A00806480937A008091CD -:10E810007A0086FDFCCF2091780040917900942FFA -:10E8200080E030E0282B392BC90108951F93182F61 -:10E8300080E892EE60E00F942FF31093C600809171 -:10E84000C00086FFFCCF8091C00080648093C00030 -:10E850000F944DF31F9108952F923F924F925F9224 -:10E860006F927F928F929F92AF92BF92CF92DF92E0 -:10E87000EF92FF920F931F93DF93CF93CDB7DEB745 -:10E8800062970FB6F894DEBF0FBECDBF382E622E52 -:10E89000CA01DB015C016D01772460E2262E2E01A6 -:10E8A0000894411C511C8BC081E0A81680E0B8067A -:10E8B00081E0C80680E0D80628F0C601AA27BB2759 -:10E8C0000F947EF3BB27AD2D9C2D8B2D0F947EF3E3 -:10E8D0008A2D0F947EF32092C6008091C00086FF9F -:10E8E000FCCF8091C00080648093C0009DE2909333 -:10E8F000C6008091C00086FFFCCF8091C00080647C -:10E900008093C0002092C6008091C00086FFFCCF9B -:10E910008091C00080648093C000198286017501D7 -:10E9200088249924A1E03A1651F03A1620F0B2E07A -:10E930003B1661F409C00BBFF701779007C0C70110 -:10E940000F94D5FF782E02C0F7017080872D0F94A9 -:10E950007EF32092C6008091C00086FFFCCF80919C -:10E96000C00080648093C000872D8052F401EF7056 -:10E97000F0708F3520F4E40DF51D708204C0E40DB5 -:10E98000F51D8EE280830894E11CF11C011D111D10 -:10E990000894811C911C90E18916910409F0C2CF62 -:10E9A00080E190E0A0E0B0E0A80EB91ECA1EDB1E18 -:10E9B000198AC2010F946BF30F944DF36A94662089 -:10E9C00009F072CF62960FB6F894DEBF0FBECDBFCE -:10E9D000CF91DF911F910F91FF90EF90DF90CF903B -:10E9E000BF90AF909F908F907F906F905F904F906F -:10E9F0003F902F9008952F923F924F925F926F9287 -:10EA00007F928F929F92AF92BF92CF92DF92EF92BE -:10EA1000FF920F931F93DF93CF93CDB7DEB7CD5304 -:10EA2000D1400FB6F894DEBF0FBECDBF279A2F9A04 -:10EA30008091C00082608093C00080E18093C40018 -:10EA400088E18093C1000000EE24FF248701B4E038 -:10EA5000AB2EB12CCC24DD2424C0C5010197F1F7E5 -:10EA60000894E11CF11C011D111D21E2E2162EE4A7 -:10EA7000F20620E0020720E0120718F0A1E0CA2EFB -:10EA8000D12CC801B70128E53BE140E050E00F94EC -:10EA90009FFF611571058105910519F485B18058B5 -:10EAA00085B98091C00087FD03C0C114D104A9F2CB -:10EAB000A6014F5F5F4FC25EDE4F59834883CE5140 -:10EAC000D140C25EDE4F68817981CE51D140613044 -:10EAD000710511F00D946EFFC05DDE4F1982188232 -:10EAE000C053D14060E0C15DDE4F1882CF52D140AB -:10EAF000AA24BB24C05EDE4F188219821A821B82B0 -:10EB0000C052D140CE5CDE4F188219821A821B821D -:10EB1000C253D14080E090E0A0E0B0E0ABBFFC0188 -:10EB2000A791B691C45CDE4FB983A883CC53D14082 -:10EB30000D9469FFC25EDE4FE881F981CE51D1406C -:10EB4000319709F52091C600C25EDE4F1982188206 -:10EB5000CE51D14022C02F5F3F4F4F4F5F4F2130EA -:10EB6000F2E13F07FAE74F07F0E05F0780F0C45C8F -:10EB7000DE4F08811981CC53D1400F5F1F4F19F030 -:10EB8000EE27FF27099420E030E040E050E080913C -:10EB9000C00087FFE0CF2091C600213209F094C663 -:10EBA0000894A11CB11C33E0A316B10409F08EC671 -:10EBB00000E010E018C041E24093C6008091C00020 -:10EBC00086FFFCCF8091C00080648093C0002F5FDF -:10EBD0003F4F2931310579F70F944DF30F5F1F4FE8 -:10EBE0000530110519F020E030E0E5CF1092080261 -:10EBF0001092090210920A0210920B021092040263 -:10EC00001092050210920602109207021092000262 -:10EC10001092010210920202109203028FEE90EE07 -:10EC200060E00F9466F380E191EE60E00F942FF3C3 -:10EC30008091C00087FFFCCF9091C600903608F00D -:10EC40009F759032B8F09093C6008091C00086FF07 -:10EC5000FCCF8091C00080648093C00080E28093EC -:10EC6000C6008091C00086FFFCCF8091C000806408 -:10EC70008093C000983409F4DBC19934B8F492341D -:10EC800009F45DC1933458F4903319F1903308F4CA -:10EC900018C69F33A1F1903409F013C6BDC0953456 -:10ECA00009F474C1963409F00CC69CC1923509F47C -:10ECB0002FC2933538F49C3409F4F9C1913509F029 -:10ECC00000C61CC2963509F449C2993509F0F9C548 -:10ECD0009CC485E892EE62E00F9466F31092040201 -:10ECE000109205021092060210920702109208027A -:10ECF0001092090210920A0210920B0217C189E9C0 -:10ED000092EE62E00F9466F38FEE90EE60E00F9467 -:10ED100066F381E291EE60E00F942FF381EC91EEC7 -:10ED200060E00F9466F381E391EE60E00F942FF3BF -:10ED300084EE90EE60E00F9466F381E491EE60E083 -:10ED40000F942FF386E090E061E070E00F94A5F35C -:10ED50000F944DF381E691EE60E00F942FF383ED75 -:10ED600091EE60E00F9466F381E591EE60E00F9420 -:10ED70002FF38DEC91EE60E00F9466F381E791EE56 -:10ED800060E00F942FF38EE10F947EF388E90F94E7 -:10ED90007EF381E00F947EF30F944DF381E891EEC2 -:10EDA00060E00F942FF319E0E0E0F0E010935700DB -:10EDB000E4918E2F0F947EF30F944DF381E991EE41 -:10EDC00060E00F942FF3E3E0F0E010935700E4913C -:10EDD0008E2F0F947EF30F944DF381EA91EE60E055 -:10EDE0000F942FF3E2E0F0E010935700E4918E2FA0 -:10EDF0000F947EF30F944DF381EB91EE60E00F944E -:10EE00002FF3E1E0F0E0109357001491812F0F945D -:10EE10007EF30F944DF307CF85EA92EE62E00F94F4 -:10EE200066F385E592EE60E00F9466F30F944DF380 -:10EE300000E010E019C0C8016F2D0F94DDFFFF2026 -:10EE400031F483E592EE60E00F942FF30BC0F09263 -:10EE5000C6008091C00086FFFCCF8091C000806416 -:10EE60008093C0000F5F1F4FC80181519F41AA27A7 -:10EE700097FDA095BA2FABBFFC01F7905AE2F516AB -:10EE800021F062E000301607B1F60F944DF30F94B5 -:10EE90004DF381E692EE60E00F9466F30F944DF32C -:10EEA000CC24DD2400E010E01EC0C8010F94D5FF83 -:10EEB000F82E882331F483E592EE60E00F942FF36F -:10EEC0000BC08093C6008091C00086FFFCCF80916C -:10EED000C00080648093C000FE1419F00894C11C27 -:10EEE000D11C0F5F1F4FC80181519F41AA2797FD79 -:10EEF000A095BA2FABBFFC01E7907AE2E71621F0AC -:10EF000082E00030180789F60F944DF30F944DF30B -:10EF10008CE692EE60E00F942FF3C60161E070E0A2 -:10EF20000F94A5F30F944DF30F944DF3109200023C -:10EF300010920102109202021092030274CE83EB2F -:10EF400092EE62E00F9466F3279A2F9A16C02F98DC -:10EF500080E090E0E0EDF7E03197F1F7019684363C -:10EF60009105C1F72F9A80E090E0E0EDF7E031974E -:10EF7000F1F7019684369105C1F78091C00087FFB3 -:10EF8000E6CF8091C00087FFFCCF95C48FEB92EE57 -:10EF900062E00F9466F3409100025091010260918B -:10EFA00002027091030281E020E10F942CF4809121 -:10EFB000000290910102A0910202B09103028050E0 -:10EFC0009F4FAF4FBF4F8093000290930102A093D9 -:10EFD0000202B093030280509041A040B04008F478 -:10EFE00022CEA4CF8DEC92EE62E00F9466F34091B6 -:10EFF000040250910502609106027091070280E0C0 -:10F0000020E10F942CF48091040290910502A091CC -:10F010000602B091070280509F4FAF4FBF4F8093C1 -:10F02000040290930502A0930602B0930702FBCD61 -:10F030008AED92EE62E00F9466F385E892EE60E06E -:10F040000F9466F389E992EE60E00F9466F385EA27 -:10F0500092EE60E00F9466F383EB92EE60E00F9423 -:10F0600066F38FEB92EE60E00F9466F38DEC92EE18 -:10F0700060E00F9466F38AED92EE60E00F9466F321 -:10F0800081EE92EE60E00F9466F382EF92EE60E024 -:10F090000F9466F38CE093EE60E00F9466F387E1E3 -:10F0A00093EE60E00F9466F380E393EEB9CD81EECA -:10F0B00092EE62E00F9466F381E40F9416F482E41A -:10F0C0000F9416F483E40F9416F484E40F9416F46A -:10F0D00085E40F9416F486E40F9416F487E40F94F5 -:10F0E00016F488E40F9416F48AE40F9416F48BE473 -:10F0F0000F9416F48CE40F9416F495CD82EF92EEF3 -:10F1000062E00F9466F399249394AA24BB2445C427 -:10F110008CE093EE62E00F9466F340910802509108 -:10F12000090260910A0270910B0282E020E10F94C3 -:10F130002CF48091080290910902A0910A02B091EA -:10F140000B0280509F4FAF4FBF4F809308029093A8 -:10F150000902A0930A02B0930B0265CD87E193EEFA -:10F1600062E00F9466F384EE90EE60E00F9466F335 -:10F1700089ED91EE60E00F9466F309E715EECC5D42 -:10F18000DE4F19830883C452D1406624772443019B -:10F19000CA5DDE4F19821882C652D140A401930184 -:10F1A0005695479537952795C85DDE4F2883398357 -:10F1B0004A835B83C852D140CA5DDE4F4881598182 -:10F1C000C652D1404F5F5F4FCA5DDE4F59834883BF -:10F1D000C652D140CA0162E070E00F94A5F350E23C -:10F1E0005093C6008091C00086FFFCCF8091C00084 -:10F1F00080648093C0006DE26093C6008091C0007F -:10F2000086FFFCCF8091C00080648093C00070E2D4 -:10F210007093C6008091C00086FFFCCF8091C00033 -:10F2200080648093C000C85DDE4FE880F9800A8169 -:10F230001B81C852D140BB27A12F902F8F2D0F9437 -:10F240007EF3C85DDE4F8881C852D1400F947EF3B3 -:10F2500070E2F72EF092C6008091C00086FFFCCFCE -:10F260008091C00080648093C0000DE30093C600CD -:10F270008091C00086FFFCCF8091C00080648093A5 -:10F28000C00010E21093C6008091C00086FFFCCF42 -:10F290008091C00080648093C0008BBEF3012791F1 -:10F2A000C45DDE4F2883CC52D140A22EBB24CC2497 -:10F2B000DD240894611C711C811C911C8BBEF30120 -:10F2C0008791282E332444245524142D032DF22C09 -:10F2D000EE24EA0CFB1C0C1D1D1D0894611C711C06 -:10F2E000811C911C8BBEF3013791C35DDE4F3883C7 -:10F2F000CD52D1400894611C711C811C911C8BBEA5 -:10F30000F3014791C25DDE4F4883CE52D1402DEFCD -:10F310003FEF4FEF5FEF620E731E841E951E0F943A -:10F320007EF330E23093C6008091C00086FFFCCFB0 -:10F330008091C00080648093C000C45DDE4F8881EE -:10F34000CC52D1400F947EF340E24093C6008091AE -:10F35000C00086FFFCCF8091C00080648093C00015 -:10F36000C25DDE4F8881CE52D1400F947EF350E2D1 -:10F370005093C6008091C00086FFFCCF8091C000F2 -:10F3800080648093C000C35DDE4F8881CD52D14040 -:10F390000F947EF360E26093C6008091C00086FF08 -:10F3A000FCCF8091C00080648093C0007FEFE7169F -:10F3B0007FEFF70670E0070770E0170731F48EE083 -:10F3C00092EE60E00F942FF3DFC0D801C701807088 -:10F3D000907CA070B0708050904CA040B040D1F5AF -:10F3E0002FEF3FE340E050E0E222F3220423152315 -:10F3F000C85DDE4FA880B980CA80DB80C852D1408A -:10F40000AE0CBF1CC01ED11EAA0CBB1CCC1CDD1C2C -:10F4100088E192EE60E00F942FF3BB27A12F902F8D -:10F420008F2D0F947EF38E2D0F947EF330E2309368 -:10F43000C6008091C00086FFFCCF8091C000806430 -:10F440008093C0004EE34093C6008091C00086FFC9 -:10F45000FCCF87C06EE07EEF80E090E0E622F722EE -:10F46000082319237CE0E71674E9F70670E0070724 -:10F4700070E0170709F088C0C25DDE4F8881CE5268 -:10F48000D140E82EFF2400E010E0102F0F2DFE2CBD -:10F49000EE24C35DDE4F9881CD52D140E90EF11CC0 -:10F4A000011D111DD601C50181709070A070B07052 -:10F4B000DC0199278827E80EF91E0A1F1B1F20EF81 -:10F4C00030E040E050E0A222B322C422D522F1E194 -:10F4D000AA0CBB1CCC1CDD1CFA95D1F7EA0CFB1C5A -:10F4E0000C1D1D1D41E050E060E070E0242235223B -:10F4F00046225722E5E1220C331C441C551CEA9598 -:10F50000D1F7E20CF31C041D151D57016801AA0C6C -:10F51000BB1CCC1CDD1C8FE192EE60E00F942FF33E -:10F52000C801AA27BB270F947EF3BB27A12F902FDA -:10F530008F2D0F947EF38E2D0F947EF350E2509317 -:10F54000C6008091C00086FFFCCF8091C00080641F -:10F550008093C0006EE36093C6008091C00086FF78 -:10F56000FCCF8091C00080648093C000C601AA27B0 -:10F57000BB270F947EF3BB27AD2D9C2D8B2D0F94B5 -:10F580007EF38A2D0F947EF370E27093C600809113 -:10F59000C00086FFFCCF8091C00080648093C000D3 -:10F5A000CC5DDE4FE881F981C452D140CF01AA275A -:10F5B00097FDA095BA2FABBFFC018791969160E0B3 -:10F5C0000F942FF30F944DF3CC5DDE4F088119811A -:10F5D000C452D1400E5F1F4FCC5DDE4F19830883AC -:10F5E000C452D140CA5DDE4F28813981C652D14014 -:10F5F0002933310509F417CB44E050E060E070E0B6 -:10F60000640E751E861E971EC9CD80E393EE62E0E0 -:10F610000F9466F384E292EE60E00F942FF38091F2 -:10F62000C00087FFFCCF1091C6001F751093C60065 -:10F630008091C00086FFFCCF8091C00080648093E1 -:10F64000C0000F944DF3812F81548A3108F036C1E8 -:10F65000163409F495C0173490F4133409F44EC0ED -:10F66000143430F41134F1F0123409F01DC130C0FB -:10F67000143409F459C0153409F016C16BC01A349A -:10F6800009F4C4C01B3438F4173409F48FC018349B -:10F6900009F00AC1A1C01B3409F4D2C01C3409F01E -:10F6A00003C1E8C08FEF81B90DC082B1809582B9E6 -:10F6B00080E090E0E0EDF7E03197F1F70196883CCB -:10F6C0009105C1F78091C00087FFEFCF12B8EFC05E -:10F6D0008FEF84B90DC085B1809585B980E090E049 -:10F6E000E0EDF7E03197F1F70196883C9105C1F71D -:10F6F0008091C00087FFEFCF15B8D9C08FEF87B9D1 -:10F700000DC088B1809588B980E090E0E0EDF7E029 -:10F710003197F1F70196883C9105C1F78091C000BF -:10F7200087FFEFCF18B8C3C08FEF8AB90DC08BB178 -:10F7300080958BB980E090E0E0EDF7E03197F1F74C -:10F740000196883C9105C1F78091C00087FFEFCFFB -:10F750001BB8ADC08FEF8DB90DC08EB180958EB93D -:10F7600080E090E0E0EDF7E03197F1F70196883C1A -:10F770009105C1F78091C00087FFEFCF1EB897C0F9 -:10F780008FEF80BB0DC081B3809581BB80E090E09E -:10F79000E0EDF7E03197F1F70196883C9105C1F76C -:10F7A0008091C00087FFEFCF11BA81C08FEF83BB7C -:10F7B0000DC084B3809584BB80E090E0E0EDF7E07D -:10F7C0003197F1F70196883C9105C1F78091C0000F -:10F7D00087FFEFCF14BA6BC08FEF809301010FC08A -:10F7E0008091020180958093020180E090E0E0ED3D -:10F7F000F7E03197F1F70196883C9105C1F78091C8 -:10F80000C00087FFEDCF1092020151C08FEF8093AF -:10F8100004010FC08091050180958093050180E06F -:10F8200090E0E0EDF7E03197F1F70196883C910523 -:10F83000C1F78091C00087FFEDCF1092050137C05E -:10F840008FEF809307010FC080910801809580930E -:10F85000080180E090E0E0EDF7E03197F1F70196E4 -:10F86000883C9105C1F78091C00087FFEDCF1092D1 -:10F8700008011DC08FEF80930A010FC080910B011A -:10F88000809580930B0180E090E0E0EDF7E0319708 -:10F89000F1F70196883C9105C1F78091C00087FF80 -:10F8A000EDCF10920B0103C08FE292EEB9C98091A7 -:10F8B000C00087FFFCCF8091C600B5C982E492EEFC -:10F8C000AFC98CE191EEACC9AA24BB24933061F19D -:10F8D000943028F4913089F0923008F508C09530C2 -:10F8E000B1F1953040F1963009F053C04EC02B3144 -:10F8F00009F020C991E06BE11DC9213041F0C15DE3 -:10F90000DE4F5881CF52D140251709F002C362273C -:10F91000C15DDE4F2883CF52D14092E00BC9B22F98 -:10F92000A0E0622793E006C9822F90E0A82BB92BB4 -:10F93000622794E0FFC82E3009F0EBC2622795E001 -:10F94000C05DDE4F19821882C053D140F3C8E1E098 -:10F95000F0E0EC0FFD1FC05DDE4FE880F980C05382 -:10F96000D140EE0DFF1D208387010F5F1F4FC05D4B -:10F97000DE4F19830883C053D14062270A171B0743 -:10F9800009F0D8C8D80196E0D5C8261709F0C1C239 -:10F9900003C0973009F0CEC899248981833109F4D6 -:10F9A000FCC08431C8F4863009F4C2C0873050F4FA -:10F9B000823009F4F0C0833009F458C0813009F076 -:10F9C0000AC23EC0813109F462C0823108F0A6C08B -:10F9D000803109F000C2DFC0883109F472C089317A -:10F9E00050F4853109F4D9C0853108F477C18631E6 -:10F9F00009F0F1C173C18A3109F457C08A3108F4A2 -:10FA00007CC08B3109F446C08D3109F0E4C18D8191 -:10FA1000803311F090E00AC08F81882311F49EE1B9 -:10FA200005C0813011F091E001C098E91A821B8273 -:10FA30008D818C831D829E831F8227E030E0CFC1A1 -:10FA40001A8288E08B8381E48C8386E58D8382E54E -:10FA50008E8389E48F8383E5888780E589878FE5B6 -:10FA60008A8782E38B872BE030E0B9C18A818139B4 -:10FA700041F0823941F0803911F48FE005C080E017 -:10FA800003C082E001C08AE01A828B8344C09924BB -:10FA9000939481C08D81882311F48EE12CC0813034 -:10FAA00011F081E028C088E926C01A82E1E0F0E088 -:10FAB00089E08093570084918B831C8224E030E09E -:10FAC0008EC18B81803589F48C81883039F4E2E0F5 -:10FAD000F0E089E08093570084910DC0E0E0F0E011 -:10FAE00089E080935700849106C0E3E0F0E089E06C -:10FAF0008093570084911A82DFCF8D81836C99E0C7 -:10FB0000E1E0F0E0082E90935700E89507B600FC7E -:10FB1000FDCF1A821B8223E030E061C11A82CE5CE5 -:10FB2000DE4F188219821A821B82C253D14055C1FE -:10FB30008A8190E0A0E0B0E0582F442733272227A5 -:10FB40008B8190E0A0E0B0E0DC0199278827282B8A -:10FB5000392B4A2B5B2B8D8190E0A0E0B0E0282B65 -:10FB6000392B4A2B5B2B8C8190E0A0E0B0E0BA2FC0 -:10FB7000A92F982F8827282B392B4A2B5B2B220F54 -:10FB8000331F441F551FC05EDE4F288339834A83CD -:10FB90005B83C052D1401A8220C19A812B8183316C -:10FBA00049F0C05EDE4F488159816A817B81C05235 -:10FBB000D1408AC0CE5CDE4F488159816A817B8109 -:10FBC000C253D140403080EC580783E0680780E0A2 -:10FBD0007807F0F483E0FA0160935B0080935700AC -:10FBE000E89507B600FCFDCFCE5CDE4F4881598119 -:10FBF0006A817B81C253D14040505F4F6F4F7F4F2E -:10FC0000CE5CDE4F488359836A837B83C253D140E5 -:10FC1000C95CDE4F9883C753D140CA5CDE4F18825F -:10FC2000C653D140022F10E0CA5CDE4F6881798153 -:10FC3000C653D140062B172BC05EDE4F4881598139 -:10FC40006A817B81C052D140DE011B9631E08C91EC -:10FC500011962C9111971296C75CDE4F2883C953D9 -:10FC6000D140C85CDE4F1882C853D14090E0C85CD8 -:10FC7000DE4FE881F981C853D1408E2B9F2B0C01B8 -:10FC8000FA0160935B0030935700E89511244E5FB2 -:10FC90005F4F6F4F7F4F02501040C9F685E0C05E46 -:10FCA000DE4FE880F9800A811B81C052D140F70104 -:10FCB00000935B0080935700E89507B600FCFDCFEA -:10FCC00081E180935700E8951A82C05EDE4F488339 -:10FCD00059836A837B83C052D1407FC0FA80C55C60 -:10FCE000DE4FF882CB53D140C65CDE4F1882CA5338 -:10FCF000D1408B81C82EDD24C65CDE4F088119817E -:10FD0000CA53D140C02AD12A1A828981BE016D5FAF -:10FD10007F4F843121F59601C05EDE4FE880F98087 -:10FD20000A811B81C052D1400BBFF7018791969188 -:10FD3000DB018C9311969C936E5F7F4FD801C701B6 -:10FD40000296A11DB11DC05EDE4F88839983AA83F0 -:10FD5000BB83C052D14022503040F1F636C0C05E65 -:10FD6000DE4F288139814A815B81C052D14008949D -:10FD7000C108D108760100E010E00894C11CD11C34 -:10FD80000894E11CF11C011D111DE20EF31E041F5D -:10FD9000151F21BDBB27A52F942F832F82BD2F5F59 -:10FDA0003F4F4F4F5F4FF89A80B5DB018D93BD01F8 -:10FDB0002E153F054007510761F7C05EDE4F2883CF -:10FDC00039834A835B83C052D14096012D5F3F4FF8 -:10FDD000FB01108204C080EC8A8322E030E08BE1DA -:10FDE0008093C6008091C00086FFFCCF8091C00048 -:10FDF00080648093C000C15DDE4FF881CF52D14056 -:10FE0000F093C6008091C00086FFFCCF8091C000B7 -:10FE100080648093C000432F3093C6008091C0005F -:10FE200086FFFCCF8091C00080648093C000922F39 -:10FE30002093C6008091C00086FFFCCF8091C00057 -:10FE400080648093C0008EE08093C6008091C000E3 -:10FE500086FFFCCF8091C00080648093C00065E184 -:10FE6000C15DDE4FE880CF52D1406E2569276427FF -:10FE7000FE01319610C090819093C6008091C00021 -:10FE800086FFFCCF31968091C00080648093C000D3 -:10FE90006927215030402115310569F76093C6006C -:10FEA0008091C00086FFFCCF8091C0008064809369 -:10FEB000C00085B1805885B9992081F4C15DDE4FBD -:10FEC0000881CF52D1400F5FC15DDE4F0883CF5212 -:10FED000D14090E0A0E0B0E00D949AF527982F98DB -:10FEE00080E090E020ED37E0F9013197F1F70196DD -:10FEF00084369105C9F700008091C0008D7F809302 -:10FF0000C00081E180935700E895EE27FF27099410 -:10FF1000FFCF90E00D949AF597FB092E07260AD0A3 -:10FF200077FD04D02ED006D000201AF4709561958C -:10FF30007F4F0895F6F7909581959F4F0895A1E220 -:10FF40001A2EAA1BBB1BFD010DC0AA1FBB1FEE1F53 -:10FF5000FF1FA217B307E407F50720F0A21BB30B9E -:10FF6000E40BF50B661F771F881F991F1A9469F71A -:10FF700060957095809590959B01AC01BD01CF0176 -:10FF80000895AA1BBB1B51E107C0AA1FBB1FA617E0 -:10FF9000B70710F0A61BB70B881F991F5A95A9F732 -:10FFA00080959095BC01CD010895F999FECF92BD41 -:10FFB00081BDF89A992780B50895262FF999FECF2B -:10FFC0001FBA92BD81BD20BD0FB6F894FA9AF99A76 -:0AFFD0000FBE01960895F894FFCFCC -:040000033000E000E9 -:00000001FF diff --git a/bootloaders/stk500v2/STK500V2.pnproj b/bootloaders/stk500v2/STK500V2.pnproj deleted file mode 100644 index d935019e..00000000 --- a/bootloaders/stk500v2/STK500V2.pnproj +++ /dev/null @@ -1 +0,0 @@ - \ No newline at end of file diff --git a/bootloaders/stk500v2/STK500V2.pnps b/bootloaders/stk500v2/STK500V2.pnps deleted file mode 100644 index f85cde5e..00000000 --- a/bootloaders/stk500v2/STK500V2.pnps +++ /dev/null @@ -1 +0,0 @@ - \ No newline at end of file diff --git a/bootloaders/stk500v2/avr_cpunames.h b/bootloaders/stk500v2/avr_cpunames.h deleted file mode 100644 index ad0ed9c0..00000000 --- a/bootloaders/stk500v2/avr_cpunames.h +++ /dev/null @@ -1,189 +0,0 @@ -//************************************************************************************************** -//* -//* Atmel AVR CPU name strings -//* -//************************************************************************************************** -//* Sep 19, 2010 Started on avr_cpunames.h -//************************************************************************************************** - -//#include "avr_cpunames.h" - -//************************************************************************************************** - - -#if defined (__AVR_AT94K__) - #define _AVR_CPU_NAME_ "AT94k" -#elif defined (__AVR_AT43USB320__) -#elif defined (__AVR_AT43USB355__) -#elif defined (__AVR_AT76C711__) -#elif defined (__AVR_AT86RF401__) -#elif defined (__AVR_AT90PWM1__) -#elif defined (__AVR_AT90PWM2__) -#elif defined (__AVR_AT90PWM2B__) -#elif defined (__AVR_AT90PWM3__) -#elif defined (__AVR_AT90PWM3B__) -#elif defined (__AVR_AT90PWM216__) -#elif defined (__AVR_AT90PWM316__) -#elif defined (__AVR_ATmega32C1__) -#elif defined (__AVR_ATmega32M1__) -#elif defined (__AVR_ATmega32U4__) - #define _AVR_CPU_NAME_ "ATmega32U4" -#elif defined (__AVR_ATmega32U6__) - #define _AVR_CPU_NAME_ "ATmega32U6" -#elif defined (__AVR_ATmega128__) - #define _AVR_CPU_NAME_ "Atmega128" -#elif defined (__AVR_ATmega1280__) - #define _AVR_CPU_NAME_ "ATmega1280" -#elif defined (__AVR_ATmega1281__) - #define _AVR_CPU_NAME_ "ATmega1281" -#elif defined (__AVR_ATmega1284P__) - #define _AVR_CPU_NAME_ "ATmega1284" -#elif defined (__AVR_ATmega128RFA1__) - #define _AVR_CPU_NAME_ "ATmega128RFA1" -#elif defined (__AVR_ATmega2560__) - #define _AVR_CPU_NAME_ "ATmega2560" -#elif defined (__AVR_ATmega2561__) - #define _AVR_CPU_NAME_ "ATmega2561" -#elif defined (__AVR_AT90CAN32__) - #define _AVR_CPU_NAME_ "AT90CAN32" -#elif defined (__AVR_AT90CAN64__) - #define _AVR_CPU_NAME_ "AT90CAN64" -#elif defined (__AVR_AT90CAN128__) - #define _AVR_CPU_NAME_ "AT90CAN128" -#elif defined (__AVR_AT90USB82__) - #define _AVR_CPU_NAME_ "AT90USB82" -#elif defined (__AVR_AT90USB162__) - #define _AVR_CPU_NAME_ "AT90USB162" -#elif defined (__AVR_AT90USB646__) - #define _AVR_CPU_NAME_ "AT90USB646" -#elif defined (__AVR_AT90USB647__) - #define _AVR_CPU_NAME_ "AT90USB647" -#elif defined (__AVR_AT90USB1286__) - #define _AVR_CPU_NAME_ "AT90USB1286" -#elif defined (__AVR_AT90USB1287__) - #define _AVR_CPU_NAME_ "AT90USB1287" -#elif defined (__AVR_ATmega64__) - #define _AVR_CPU_NAME_ "ATmega64" -#elif defined (__AVR_ATmega640__) - #define _AVR_CPU_NAME_ "ATmega640" -#elif defined (__AVR_ATmega644__) - #define _AVR_CPU_NAME_ "ATmega644" -#elif defined (__AVR_ATmega644P__) - #define _AVR_CPU_NAME_ "ATmega644P" -#elif defined (__AVR_ATmega645__) - #define _AVR_CPU_NAME_ "ATmega645" -#elif defined (__AVR_ATmega6450__) - #define _AVR_CPU_NAME_ "ATmega6450" -#elif defined (__AVR_ATmega649__) - #define _AVR_CPU_NAME_ "ATmega649" -#elif defined (__AVR_ATmega6490__) - #define _AVR_CPU_NAME_ "ATmega6490" -#elif defined (__AVR_ATmega103__) - #define _AVR_CPU_NAME_ "ATmega103" -#elif defined (__AVR_ATmega32__) - #define _AVR_CPU_NAME_ "Atmega32" -#elif defined (__AVR_ATmega323__) - #define _AVR_CPU_NAME_ "ATmega323" -#elif defined (__AVR_ATmega324P__) - #define _AVR_CPU_NAME_ "ATmega324P" -#elif defined (__AVR_ATmega325__) - #define _AVR_CPU_NAME_ "ATmega325" -#elif defined (__AVR_ATmega325P__) - #define _AVR_CPU_NAME_ "ATmega325P" -#elif defined (__AVR_ATmega3250__) - #define _AVR_CPU_NAME_ "ATmega3250" -#elif defined (__AVR_ATmega3250P__) - #define _AVR_CPU_NAME_ "ATmega3250P" -#elif defined (__AVR_ATmega328P__) - #define _AVR_CPU_NAME_ "ATmega328P" -#elif defined (__AVR_ATmega329__) - #define _AVR_CPU_NAME_ "ATmega329" -#elif defined (__AVR_ATmega329P__) - #define _AVR_CPU_NAME_ "ATmega329P" -#elif defined (__AVR_ATmega3290__) - #define _AVR_CPU_NAME_ "ATmega3290" -#elif defined (__AVR_ATmega3290P__) - #define _AVR_CPU_NAME_ "ATmega3290P" -#elif defined (__AVR_ATmega32HVB__) - #define _AVR_CPU_NAME_ "ATmega32HVB" -#elif defined (__AVR_ATmega406__) - #define _AVR_CPU_NAME_ "ATmega406" -#elif defined (__AVR_ATmega16__) - #define _AVR_CPU_NAME_ "Atmega16" -#elif defined (__AVR_ATmega161__) - #define _AVR_CPU_NAME_ "ATmega161" -#elif defined (__AVR_ATmega162__) - #define _AVR_CPU_NAME_ "ATmega162" -#elif defined (__AVR_ATmega163__) - #define _AVR_CPU_NAME_ "ATmega163" -#elif defined (__AVR_ATmega164P__) - #define _AVR_CPU_NAME_ "ATmega164P" -#elif defined (__AVR_ATmega165__) - #define _AVR_CPU_NAME_ "ATmega165" -#elif defined (__AVR_ATmega165P__) - #define _AVR_CPU_NAME_ "ATmega165P" -#elif defined (__AVR_ATmega168__) - #define _AVR_CPU_NAME_ "ATmega168" -#elif defined (__AVR_ATmega168P__) - #define _AVR_CPU_NAME_ "ATmega168P" -#elif defined (__AVR_ATmega169__) - #define _AVR_CPU_NAME_ "Atmega169" -#elif defined (__AVR_ATmega169P__) - #define _AVR_CPU_NAME_ "ATmega169P" -#elif defined (__AVR_ATmega8HVA__) - #define _AVR_CPU_NAME_ "ATmega8HVA" -#elif defined (__AVR_ATmega16HVA__) - #define _AVR_CPU_NAME_ "ATmega16HVA" -#elif defined (__AVR_ATmega8__) - #define _AVR_CPU_NAME_ "ATmega8" -#elif defined (__AVR_ATmega48__) - #define _AVR_CPU_NAME_ "ATmega48" -#elif defined (__AVR_ATmega48P__) - #define _AVR_CPU_NAME_ "ATmega48P" -#elif defined (__AVR_ATmega88__) - #define _AVR_CPU_NAME_ "ATmega88" -#elif defined (__AVR_ATmega88P__) - #define _AVR_CPU_NAME_ "ATmega88P" -#elif defined (__AVR_ATmega8515__) - #define _AVR_CPU_NAME_ "ATmega8515" -#elif defined (__AVR_ATmega8535__) - #define _AVR_CPU_NAME_ "ATmega8535" -#elif defined (__AVR_AT90S8535__) -#elif defined (__AVR_AT90C8534__) -#elif defined (__AVR_AT90S8515__) -#elif defined (__AVR_AT90S4434__) -#elif defined (__AVR_AT90S4433__) -#elif defined (__AVR_AT90S4414__) -#elif defined (__AVR_ATtiny22__) -#elif defined (__AVR_ATtiny26__) -#elif defined (__AVR_AT90S2343__) -#elif defined (__AVR_AT90S2333__) -#elif defined (__AVR_AT90S2323__) -#elif defined (__AVR_AT90S2313__) -#elif defined (__AVR_ATtiny2313__) - #define _AVR_CPU_NAME_ "ATtiny2313" -#elif defined (__AVR_ATtiny13__) -#elif defined (__AVR_ATtiny13A__) -#elif defined (__AVR_ATtiny25__) -#elif defined (__AVR_ATtiny45__) -#elif defined (__AVR_ATtiny85__) -#elif defined (__AVR_ATtiny24__) -#elif defined (__AVR_ATtiny44__) -#elif defined (__AVR_ATtiny84__) -#elif defined (__AVR_ATtiny261__) -#elif defined (__AVR_ATtiny461__) -#elif defined (__AVR_ATtiny861__) -#elif defined (__AVR_ATtiny43U__) -#elif defined (__AVR_ATtiny48__) -#elif defined (__AVR_ATtiny88__) -#elif defined (__AVR_ATtiny167__) -#elif defined (__AVR_ATmega8U2__) - #define _AVR_CPU_NAME_ "ATmega8U2" -#else - #error cpu not defined -#endif - - -#if !defined (_AVR_CPU_NAME_) -// #define _AVR_CPU_NAME_ "UNKNOWN" -#endif diff --git a/bootloaders/stk500v2/avrinterruptnames.h b/bootloaders/stk500v2/avrinterruptnames.h deleted file mode 100644 index e7e3ed95..00000000 --- a/bootloaders/stk500v2/avrinterruptnames.h +++ /dev/null @@ -1,1040 +0,0 @@ -//************************************************************************************************** -//* -//* interrupt vector names -//* -//* It is important to note that the vector numbers listed here -//* are the ATMEL documentation numbers. The Arduino numbers are 1 less -//* This is because the Atmel docs start numbering the interrupts at 1 -//* when it is actually vector #0 in the table. -//************************************************************************************************** -//* Jun 1, 2010 Added support for ATmega1281 -//* Jun 30, 2010 Putting in more ifdefs to conserve space -//* Jul 3, 2010 More #ifdefs to conserve space and testing on most of my boards -//* Jul 4, 2010 Started using vector defs for #ifdefs as defined in -//* Jul 13, 2010 Added support for __AVR_ATmega128__ -//* Aug 26, 2010 Added support for __AVR_ATmega2561__ -//* Sep 13, 2010 Added support for __AVR_AT90CAN32__ __AVR_AT90CAN64__ __AVR_AT90CAN128__ -//************************************************************************************************** - -//#include "avrinterruptnames.h" - -//************************************************************************************************** -//* this defines the interrupt vectors and allows us to compile ONLY those strings that are actually -//* in the target CPU. This way we do not have to keep making changes based on cpu, it will be -//* automatic even if we add a new CPU -#ifndef _AVR_IO_H_ - #include -#endif -//************************************************************************************************** - -#ifdef __MWERKS__ - #define prog_char char - #define PGM_P char * -#endif - - prog_char gAvrInt_RESET[] PROGMEM = "RESET"; -#ifdef INT0_vect - prog_char gAvrInt_INT0[] PROGMEM = "INT0"; -#endif -#ifdef INT1_vect - prog_char gAvrInt_INT1[] PROGMEM = "INT1"; -#endif -#ifdef INT2_vect - prog_char gAvrInt_INT2[] PROGMEM = "INT2"; -#endif -#ifdef INT3_vect - prog_char gAvrInt_INT3[] PROGMEM = "INT3"; -#endif -#ifdef INT4_vect - prog_char gAvrInt_INT4[] PROGMEM = "INT4"; -#endif -#ifdef INT5_vect - prog_char gAvrInt_INT5[] PROGMEM = "INT5"; -#endif -#ifdef INT6_vect - prog_char gAvrInt_INT6[] PROGMEM = "INT6"; -#endif -#ifdef INT7_vect - prog_char gAvrInt_INT7[] PROGMEM = "INT7"; -#endif -#ifdef PCINT0_vect - prog_char gAvrInt_PCINT0[] PROGMEM = "PCINT0"; -#endif -#ifdef PCINT1_vect - prog_char gAvrInt_PCINT1[] PROGMEM = "PCINT1"; -#endif -#ifdef PCINT2_vect - prog_char gAvrInt_PCINT2[] PROGMEM = "PCINT2"; -#endif -#ifdef PCINT3_vect - prog_char gAvrInt_PCINT3[] PROGMEM = "PCINT3"; -#endif -#ifdef WDT_vect - prog_char gAvrInt_WDT[] PROGMEM = "WDT"; -#endif -#ifdef TIMER0_COMP_vect - prog_char gAvrInt_TIMER0_COMP[] PROGMEM = "TIMER0 COMP"; -#endif -#ifdef TIMER0_COMPA_vect - prog_char gAvrInt_TIMER0_COMPA[] PROGMEM = "TIMER0 COMPA"; -#endif -#ifdef TIMER0_COMPB_vect - prog_char gAvrInt_TIMER0_COMPB[] PROGMEM = "TIMER0 COMPB"; -#endif -#ifdef TIMER0_OVF_vect - prog_char gAvrInt_TIMER0_OVF[] PROGMEM = "TIMER0 OVF"; -#endif -#ifdef TIMER1_CAPT_vect - prog_char gAvrInt_TIMER1_CAPT[] PROGMEM = "TIMER1 CAPT"; -#endif -#ifdef TIMER1_COMPA_vect - prog_char gAvrInt_TIMER1_COMPA[] PROGMEM = "TIMER1 COMPA"; -#endif -#ifdef TIMER1_COMPB_vect - prog_char gAvrInt_TIMER1_COMPB[] PROGMEM = "TIMER1 COMPB"; -#endif -#ifdef TIMER1_COMPC_vect - prog_char gAvrInt_TIMER1_COMPC[] PROGMEM = "TIMER1 COMPC"; -#endif -#ifdef TIMER1_OVF_vect - prog_char gAvrInt_TIMER1_OVF[] PROGMEM = "TIMER1 OVF"; -#endif -#ifdef TIMER2_COMP_vect - prog_char gAvrInt_TIMER2_COMP[] PROGMEM = "TIMER2 COMP"; -#endif -#ifdef TIMER2_COMPA_vect - prog_char gAvrInt_TIMER2_COMPA[] PROGMEM = "TIMER2 COMPA"; -#endif -#ifdef TIMER2_COMPB_vect - prog_char gAvrInt_TIMER2_COMPB[] PROGMEM = "TIMER2 COMPB"; -#endif -#ifdef TIMER2_OVF_vect - prog_char gAvrInt_TIMER2_OVF[] PROGMEM = "TIMER2 OVF"; -#endif -#ifdef TIMER3_CAPT_vect - prog_char gAvrInt_TIMER3_CAPT[] PROGMEM = "TIMER3 CAPT"; -#endif -#ifdef TIMER3_COMPA_vect - prog_char gAvrInt_TIMER3_COMPA[] PROGMEM = "TIMER3 COMPA"; -#endif -#ifdef TIMER3_COMPB_vect - prog_char gAvrInt_TIMER3_COMPB[] PROGMEM = "TIMER3 COMPB"; -#endif -#ifdef TIMER3_COMPC_vect - prog_char gAvrInt_TIMER3_COMPC[] PROGMEM = "TIMER3 COMPC"; -#endif -#ifdef TIMER3_OVF_vect - prog_char gAvrInt_TIMER3_OVF[] PROGMEM = "TIMER3 OVF"; -#endif -#ifdef TIMER4_CAPT_vect - prog_char gAvrInt_TIMER4_CAPT[] PROGMEM = "TIMER4 CAPT"; -#endif -#ifdef TIMER4_COMPA_vect - prog_char gAvrInt_TIMER4_COMPA[] PROGMEM = "TIMER4 COMPA"; -#endif -#ifdef TIMER4_COMPB_vect - prog_char gAvrInt_TIMER4_COMPB[] PROGMEM = "TIMER4 COMPB"; -#endif -#ifdef TIMER4_COMPC_vect - prog_char gAvrInt_TIMER4_COMPC[] PROGMEM = "TIMER4 COMPC"; -#endif -#ifdef TIMER4_COMPD_vect - prog_char gAvrInt_TIMER4_COMPD[] PROGMEM = "TIMER4 COMPD"; -#endif -#ifdef TIMER4_OVF_vect - prog_char gAvrInt_TIMER4_OVF[] PROGMEM = "TIMER4 OVF"; -#endif -#ifdef TIMER4_FPF_vect - prog_char gAvrInt_TIMER4_FPF[] PROGMEM = "TIMER4 Fault Protection"; -#endif -#ifdef TIMER5_CAPT_vect - prog_char gAvrInt_TIMER5_CAPT[] PROGMEM = "TIMER5 CAPT"; -#endif -#ifdef TIMER5_COMPA_vect - prog_char gAvrInt_TIMER5_COMPA[] PROGMEM = "TIMER5 COMPA"; -#endif -#ifdef TIMER5_COMPB_vect - prog_char gAvrInt_TIMER5_COMPB[] PROGMEM = "TIMER5 COMPB"; -#endif -#ifdef TIMER5_COMPC_vect - prog_char gAvrInt_TIMER5_COMPC[] PROGMEM = "TIMER5 COMPC"; -#endif -#ifdef TIMER5_OVF_vect - prog_char gAvrInt_TIMER5_OVF[] PROGMEM = "TIMER5 OVF"; -#endif - -//* when there is only 1 usart -#if defined(USART_RX_vect) || defined(USART_RXC_vect) - prog_char gAvrInt_USART_RX[] PROGMEM = "USART RX"; -#endif -#if defined(USART_UDRE_vect) - prog_char gAvrInt_USART_UDRE[] PROGMEM = "USART UDRE"; -#endif -#if defined(USART_TX_vect) || defined(USART_TXC_vect) - prog_char gAvrInt_USART_TX[] PROGMEM = "USART TX"; -#endif - - -//* usart 0 -#if defined(USART0_RX_vect) - prog_char gAvrInt_USART0_RX[] PROGMEM = "USART0 RX"; -#endif -#if defined(USART0_UDRE_vect) - prog_char gAvrInt_USART0_UDRE[] PROGMEM = "USART0 UDRE"; -#endif -#if defined(USART0_TX_vect) - prog_char gAvrInt_USART0_TX[] PROGMEM = "USART0 TX"; -#endif - - -//* usart 1 -#ifdef USART1_RX_vect - prog_char gAvrInt_USART1_RX[] PROGMEM = "USART1 RX"; -#endif -#ifdef USART1_UDRE_vect - prog_char gAvrInt_USART1_UDRE[] PROGMEM = "USART1 UDRE"; -#endif -#ifdef USART1_TX_vect - prog_char gAvrInt_USART1_TX[] PROGMEM = "USART1 TX"; -#endif - -//* usart 2 -#ifdef USART2_RX_vect - prog_char gAvrInt_USART2_RX[] PROGMEM = "USART2 RX"; -#endif -#ifdef USART2_UDRE_vect - prog_char gAvrInt_USART2_UDRE[] PROGMEM = "USART2 UDRE"; -#endif -#ifdef USART2_TX_vect - prog_char gAvrInt_USART2_TX[] PROGMEM = "USART2 TX"; -#endif - -//* usart 3 -#ifdef USART3_RX_vect - prog_char gAvrInt_USART3_RX[] PROGMEM = "USART3 RX"; -#endif -#ifdef USART3_UDRE_vect - prog_char gAvrInt_USART3_UDRE[] PROGMEM = "USART3 UDRE"; -#endif -#ifdef USART3_TX_vect - prog_char gAvrInt_USART3_TX[] PROGMEM = "USART3 TX"; -#endif -#ifdef SPI_STC_vect - prog_char gAvrInt_SPI_STC[] PROGMEM = "SPI STC"; -#endif -#ifdef ADC_vect - prog_char gAvrInt_ADC[] PROGMEM = "ADC"; -#endif -#if defined(ANALOG_COMP_vect) || defined(ANA_COMP_vect) - prog_char gAvrInt_ANALOG_COMP[] PROGMEM = "ANALOG COMP"; -#endif -#if defined(EE_READY_vect) || defined(EE_RDY_vect) - prog_char gAvrInt_EE_READY[] PROGMEM = "EE READY"; -#endif -#ifdef TWI_vect - prog_char gAvrInt_TWI[] PROGMEM = "TWI"; -#endif -#if defined(SPM_READY_vect) || defined(SPM_RDY_vect) - prog_char gAvrInt_SPM_READY[] PROGMEM = "SPM READY"; -#endif -#ifdef USI_START_vect - prog_char gAvrInt_USI_START[] PROGMEM = "USI START"; -#endif -#ifdef USI_OVERFLOW_vect - prog_char gAvrInt_USI_OVERFLOW[] PROGMEM = "USI OVERFLOW"; -#endif -#ifdef USB_GEN_vect - prog_char gAvrInt_USB_General[] PROGMEM = "USB General"; -#endif -#ifdef USB_COM_vect - prog_char gAvrInt_USB_Endpoint[] PROGMEM = "USB Endpoint"; -#endif - -#ifdef LCD_vect - prog_char gAvrInt_LCD_StartFrame[] PROGMEM = "LCD Start of Frame"; -#endif - -//* these are for the chips with CAN bus support -#ifdef CANIT_vect - prog_char gAvrInt_CAN_TrafnsferCE[] PROGMEM = "CAN Transfer Complete or Error"; -#endif -#ifdef OVRIT_vect - prog_char gAvrInt_CAN_TimerOverRun[] PROGMEM = "CAN Timer Overrun"; -#endif - -//* these are for __AVR_ATmega128RFA1__ -#ifdef TRX24_PLL_LOCK_vect - prog_char gAvrInt_TRN_PLL_LOCK[] PROGMEM = "TRX24_PLL_LOCK"; -#endif -#ifdef TRX24_PLL_UNLOCK_vect - prog_char gAvrInt_TRN_PLL_UNLOCK[] PROGMEM = "TRX24_PLL_UNLOCK"; -#endif -#ifdef TRX24_RX_START_vect - prog_char gAvrInt_TRN_RX_START[] PROGMEM = "TRX24_RX_START"; -#endif -#ifdef TRX24_RX_END_vect - prog_char gAvrInt_TRN_RX_END[] PROGMEM = "TRX24_RX_END"; -#endif -#ifdef TRX24_CCA_ED_DONE_vect - prog_char gAvrInt_TRN_CAAED_DONE[] PROGMEM = "TRX24_CCA_ED_DONE"; -#endif -#ifdef TRX24_XAH_AMI_vect - prog_char gAvrInt_TRN_FRAME_MATCH[] PROGMEM = "TRX24_FRAME_ADDRESS_MATCH"; -#endif -#ifdef TRX24_TX_END_vect - prog_char gAvrInt_TRN_TX_END[] PROGMEM = "TRX24_TX_END"; -#endif -#ifdef TRX24_AWAKE_vect - prog_char gAvrInt_TRN_AWAKE[] PROGMEM = "TRX24_AWAKE"; -#endif -#ifdef SCNT_CMP1_vect - prog_char gAvrInt_SCNT_CMP1[] PROGMEM = "SCNT_CMP1"; -#endif -#ifdef SCNT_CMP2_vect - prog_char gAvrInt_SCNT_CMP2[] PROGMEM = "SCNT_CMP2"; -#endif -#ifdef SCNT_CMP3_vect - prog_char gAvrInt_SCNT_CMP3[] PROGMEM = "SCNT_CMP3"; -#endif -#ifdef SCNT_OVFL_vect - prog_char gAvrInt_SCNT_OVFL[] PROGMEM = "SCNT_OVFL"; -#endif -#ifdef SCNT_BACKOFF_vect - prog_char gAvrInt_SCNT_BACKOFF[] PROGMEM = "SCNT_BACKOFF"; -#endif -#ifdef AES_READY_vect - prog_char gAvrInt_AES_READY[] PROGMEM = "AES_READY"; -#endif -#ifdef BAT_LOW_vect - prog_char gAvrInt_BAT_LOW[] PROGMEM = "BAT_LOW"; -#endif - - - -//************************************************************************************************** -//* these do not have vector defs and have to be done by CPU type -#if defined(__AVR_ATmega645__ ) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) - prog_char gAvrInt_NOT_USED[] PROGMEM = "NOT_USED"; -#endif -#if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega128RFA1__) - prog_char gAvrInt_RESERVED[] PROGMEM = "Reserved"; -#endif - - prog_char gAvrInt_END[] PROGMEM = "*"; - - - - - -//************************************************************************************************** -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) -#pragma mark __AVR_ATmega168__ / __AVR_ATmega328P__ / __AVR_ATmega328__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_PCINT0, // 4 - gAvrInt_PCINT1, // 5 - gAvrInt_PCINT2, // 6 - gAvrInt_WDT, // 7 - gAvrInt_TIMER2_COMPA, // 8 - gAvrInt_TIMER2_COMPB, // 9 - gAvrInt_TIMER2_OVF, // 10 - gAvrInt_TIMER1_CAPT, // 11 - gAvrInt_TIMER1_COMPA, // 12 - gAvrInt_TIMER1_COMPB, // 13 - gAvrInt_TIMER1_OVF, // 14 - gAvrInt_TIMER0_COMPA, // 15 - gAvrInt_TIMER0_COMPB, // 16 - gAvrInt_TIMER0_OVF, // 17 - gAvrInt_SPI_STC, // 18 - gAvrInt_USART_RX, // 19 - gAvrInt_USART_UDRE, // 20 - gAvrInt_USART_TX, // 21 - gAvrInt_ADC, // 22 - gAvrInt_EE_READY, // 23 - gAvrInt_ANALOG_COMP, // 24 - gAvrInt_TWI, // 25 - gAvrInt_SPM_READY, // 26 -}; - -#endif - -//************************************************************************************************** -#if defined(__AVR_ATmega169__) -#pragma mark __AVR_ATmega169__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_PCINT0, // 3 - gAvrInt_PCINT1, // 4 - gAvrInt_TIMER2_COMP, // 5 - gAvrInt_TIMER2_OVF, // 6 - gAvrInt_TIMER1_CAPT, // 7 - gAvrInt_TIMER1_COMPA, // 8 - gAvrInt_TIMER1_COMPB, // 9 - gAvrInt_TIMER1_OVF, // 10 - gAvrInt_TIMER0_COMP, // 11 - gAvrInt_TIMER0_OVF, // 12 - gAvrInt_SPI_STC, // 13 - gAvrInt_USART0_RX, // 14 - gAvrInt_USART0_UDRE, // 15 - gAvrInt_USART0_TX, // 16 - gAvrInt_USI_START, // 17 - gAvrInt_USI_OVERFLOW, // 18 - gAvrInt_ANALOG_COMP, // 19 - gAvrInt_ADC, // 20 - gAvrInt_EE_READY, // 21 - gAvrInt_SPM_READY, // 22 - gAvrInt_LCD_StartFrame, // 23 - -}; - -#endif - - -//************************************************************************************************** -#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) -#pragma mark __AVR_ATmega640__ __AVR_ATmega1280__ __AVR_ATmega1281__ __AVR_ATmega2560__ __AVR_ATmega2561__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_INT2, // 4 - gAvrInt_INT3, // 5 - gAvrInt_INT4, // 6 - gAvrInt_INT5, // 7 - gAvrInt_INT6, // 8 - gAvrInt_INT7, // 9 - gAvrInt_PCINT0, // 10 - gAvrInt_PCINT1, // 11 -#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) - gAvrInt_PCINT2, // 12 -#else - gAvrInt_NOT_USED, // 12 -#endif - gAvrInt_WDT, // 13 - gAvrInt_TIMER2_COMPA, // 14 - gAvrInt_TIMER2_COMPB, // 15 - gAvrInt_TIMER2_OVF, // 16 - gAvrInt_TIMER1_CAPT, // 17 - gAvrInt_TIMER1_COMPA, // 18 - gAvrInt_TIMER1_COMPB, // 19 - gAvrInt_TIMER1_COMPC, // 20 - gAvrInt_TIMER1_OVF, // 21 - gAvrInt_TIMER0_COMPA, // 22 - gAvrInt_TIMER0_COMPB, // 23 - gAvrInt_TIMER0_OVF, // 24 - gAvrInt_SPI_STC, // 25 - - gAvrInt_USART0_RX, // 26 - gAvrInt_USART0_UDRE, // 27 - gAvrInt_USART0_TX, // 28 - gAvrInt_ANALOG_COMP, // 29 - gAvrInt_ADC, // 30 - gAvrInt_EE_READY, // 31 - - gAvrInt_TIMER3_CAPT, // 32 - gAvrInt_TIMER3_COMPA, // 33 - gAvrInt_TIMER3_COMPB, // 34 - gAvrInt_TIMER3_COMPC, // 35 - gAvrInt_TIMER3_OVF, // 36 - - gAvrInt_USART1_RX, // 37 - gAvrInt_USART1_UDRE, // 38 - gAvrInt_USART1_TX, // 39 - gAvrInt_TWI, // 40 - gAvrInt_SPM_READY, // 41 -#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) - gAvrInt_TIMER4_CAPT, // 42 -#else - gAvrInt_NOT_USED, // 42 -#endif - gAvrInt_TIMER4_COMPA, // 43 - gAvrInt_TIMER4_COMPB, // 44 - gAvrInt_TIMER4_COMPC, // 45 - gAvrInt_TIMER4_OVF, // 46 -#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) - gAvrInt_TIMER5_CAPT, // 47 -#else - gAvrInt_NOT_USED, // 47 -#endif - gAvrInt_TIMER5_COMPA, // 48 - gAvrInt_TIMER5_COMPB, // 49 - gAvrInt_TIMER5_COMPC, // 50 - gAvrInt_TIMER5_OVF, // 51 - -#if defined(__AVR_ATmega640__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) - gAvrInt_USART2_RX, // 52 - gAvrInt_USART2_UDRE, // 53 - gAvrInt_USART2_TX, // 54 - - gAvrInt_USART3_RX, // 55 - gAvrInt_USART3_UDRE, // 56 - gAvrInt_USART3_TX, // 57 -#endif - -}; - -#endif - - - -//************************************************************************************************** -#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644__ ) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__) -#pragma mark __AVR_ATmega324P__ __AVR_ATmega644__ __AVR_ATmega644P__ __AVR_ATmega1284P__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_INT2, // 4 - gAvrInt_PCINT0, // 5 - gAvrInt_PCINT1, // 6 - gAvrInt_PCINT2, // 7 - gAvrInt_PCINT3, // 8 - gAvrInt_WDT, // 9 - gAvrInt_TIMER2_COMPA, // 10 - gAvrInt_TIMER2_COMPB, // 11 - gAvrInt_TIMER2_OVF, // 12 - gAvrInt_TIMER1_CAPT, // 13 - gAvrInt_TIMER1_COMPA, // 14 - gAvrInt_TIMER1_COMPB, // 15 - gAvrInt_TIMER1_OVF, // 16 - gAvrInt_TIMER0_COMPA, // 17 - gAvrInt_TIMER0_COMPB, // 18 - gAvrInt_TIMER0_OVF, // 19 - gAvrInt_SPI_STC, // 20 - gAvrInt_USART0_RX, // 21 - gAvrInt_USART0_UDRE, // 22 - gAvrInt_USART0_TX, // 23 - gAvrInt_ANALOG_COMP, // 24 - gAvrInt_ADC, // 25 - gAvrInt_EE_READY, // 26 - gAvrInt_TWI, // 27 - gAvrInt_SPM_READY, // 28 - -#if defined(__AVR_ATmega324P__ ) || defined(__AVR_ATmega644P__) - gAvrInt_USART1_RX, // 29 - gAvrInt_USART1_UDRE, // 30 - gAvrInt_USART1_TX, // 31 -#endif - -}; - - -#endif - -//************************************************************************************************** -#if defined(__AVR_ATmega1284P__ ) -#pragma mark __AVR_ATmega1284P__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_INT2, // 4 - gAvrInt_PCINT0, // 5 - gAvrInt_PCINT1, // 6 - gAvrInt_PCINT2, // 7 - gAvrInt_PCINT3, // 8 - gAvrInt_WDT, // 9 - gAvrInt_TIMER2_COMPA, // 10 - gAvrInt_TIMER2_COMPB, // 11 - gAvrInt_TIMER2_OVF, // 12 - gAvrInt_TIMER1_CAPT, // 13 - gAvrInt_TIMER1_COMPA, // 14 - gAvrInt_TIMER1_COMPB, // 15 - gAvrInt_TIMER1_OVF, // 16 - gAvrInt_TIMER0_COMPA, // 17 - gAvrInt_TIMER0_COMPB, // 18 - gAvrInt_TIMER0_OVF, // 19 - gAvrInt_SPI_STC, // 20 - gAvrInt_USART0_RX, // 21 - gAvrInt_USART0_UDRE, // 22 - gAvrInt_USART0_TX, // 23 - gAvrInt_ANALOG_COMP, // 24 - gAvrInt_ADC, // 25 - gAvrInt_EE_READY, // 26 - gAvrInt_TWI, // 27 - gAvrInt_SPM_READY, // 28 - - gAvrInt_USART1_RX, // 29 - gAvrInt_USART1_UDRE, // 30 - gAvrInt_USART1_TX, // 31 - //* these are NOT documented in doc8272.pdf - //* they are in iom1284p.h - gAvrInt_TIMER3_CAPT, // 32 - gAvrInt_TIMER3_COMPA, // 33 - gAvrInt_TIMER3_COMPB, // 34 - gAvrInt_TIMER3_OVF, // 35 - - -}; - - -#endif - - -//************************************************************************************************** -#if defined(__AVR_ATmega645__ ) -#pragma mark __AVR_ATmega645__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_PCINT0, // 3 - gAvrInt_PCINT1, // 4 - gAvrInt_TIMER2_COMP, // 5 - gAvrInt_TIMER2_OVF, // 6 - gAvrInt_TIMER1_CAPT, // 7 - gAvrInt_TIMER1_COMPA, // 8 - gAvrInt_TIMER1_COMPB, // 9 - gAvrInt_TIMER1_OVF, // 10 - gAvrInt_TIMER0_COMP, // 11 - gAvrInt_TIMER0_OVF, // 12 - gAvrInt_SPI_STC, // 13 - gAvrInt_USART0_RX, // 14 - gAvrInt_USART0_UDRE, // 15 - gAvrInt_USART0_TX, // 16 - gAvrInt_USI_START, // 17 - gAvrInt_USI_OVERFLOW, // 18 - gAvrInt_ANALOG_COMP, // 19 - gAvrInt_ADC, // 20 - gAvrInt_EE_READY, // 21 - gAvrInt_SPM_READY, // 22 - gAvrInt_NOT_USED, // 23 - -#if defined(__AVR_ATmega3250__) || defined(__AVR_ATmega6450__) - gAvrInt_PCINT2, // 24 - gAvrInt_PCINT3, // 25 -#endif -}; - - -#endif - -//************************************************************************************************** -#if defined(__AVR_ATmega16__ ) -#pragma mark __AVR_ATmega16__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_TIMER2_COMP, // 4 - gAvrInt_TIMER2_OVF, // 5 - gAvrInt_TIMER1_CAPT, // 6 - gAvrInt_TIMER1_COMPA, // 7 - gAvrInt_TIMER1_COMPB, // 8 - gAvrInt_TIMER1_OVF, // 9 - gAvrInt_TIMER0_OVF, // 10 - gAvrInt_SPI_STC, // 11 - gAvrInt_USART_RX, // 12 - gAvrInt_USART_UDRE, // 13 - gAvrInt_USART_TX, // 14 - gAvrInt_ADC, // 15 - gAvrInt_EE_READY, // 16 - gAvrInt_ANALOG_COMP, // 17 - gAvrInt_TWI, // 18 - gAvrInt_INT2, // 19 - gAvrInt_TIMER0_COMP, // 20 - gAvrInt_SPM_READY, // 21 - -}; - - -#endif - -//************************************************************************************************** -#if defined(__AVR_ATmega32__ ) -#pragma mark __AVR_ATmega32__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_INT2, // 4 - gAvrInt_TIMER2_COMP, // 5 - gAvrInt_TIMER2_OVF, // 6 - gAvrInt_TIMER1_CAPT, // 7 - gAvrInt_TIMER1_COMPA, // 8 - gAvrInt_TIMER1_COMPB, // 9 - gAvrInt_TIMER1_OVF, // 10 - gAvrInt_TIMER0_COMP, // 11 - gAvrInt_TIMER0_OVF, // 12 - gAvrInt_SPI_STC, // 13 - gAvrInt_USART_RX, // 14 - gAvrInt_USART_UDRE, // 15 - gAvrInt_USART_TX, // 16 - gAvrInt_ADC, // 17 - gAvrInt_EE_READY, // 18 - gAvrInt_ANALOG_COMP, // 19 - gAvrInt_TWI, // 20 - gAvrInt_SPM_READY, // 21 - -}; - - -#endif - -//************************************************************************************************** -#if defined(__AVR_ATmega32U4__) -#pragma mark __AVR_ATmega32U4__ -//* teensy 2.0 -//* http://www.pjrc.com/teensy/pinout.html -#define _INTERRUPT_NAMES_DEFINED_ - - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_INT2, // 4 - gAvrInt_INT3, // 5 - gAvrInt_RESERVED, // 6 - gAvrInt_RESERVED, // 7 - gAvrInt_INT6, // 8 - gAvrInt_RESERVED, // 9 - gAvrInt_PCINT0, // 10 - gAvrInt_USB_General, // 11 - gAvrInt_USB_Endpoint, // 12 - gAvrInt_WDT, // 13 - gAvrInt_RESERVED, // 14 - gAvrInt_RESERVED, // 15 - gAvrInt_RESERVED, // 16 - gAvrInt_TIMER1_CAPT, // 17 - gAvrInt_TIMER1_COMPA, // 18 - gAvrInt_TIMER1_COMPB, // 19 - gAvrInt_TIMER1_COMPC, // 20 - gAvrInt_TIMER1_OVF, // 21 - gAvrInt_TIMER0_COMPA, // 22 - gAvrInt_TIMER0_COMPB, // 23 - gAvrInt_TIMER0_OVF, // 24 - gAvrInt_SPI_STC, // 25 - - gAvrInt_USART1_RX, // 26 - gAvrInt_USART1_UDRE, // 27 - gAvrInt_USART1_TX, // 28 - gAvrInt_ANALOG_COMP, // 29 - - gAvrInt_ADC, // 30 - gAvrInt_EE_READY, // 31 - - gAvrInt_TIMER3_CAPT, // 32 - gAvrInt_TIMER3_COMPA, // 33 - gAvrInt_TIMER3_COMPB, // 34 - gAvrInt_TIMER3_COMPC, // 35 - gAvrInt_TIMER3_OVF, // 36 - gAvrInt_TWI, // 37 - gAvrInt_SPM_READY, // 38 - - gAvrInt_TIMER4_COMPA, // 39 - gAvrInt_TIMER4_COMPB, // 40 - gAvrInt_TIMER4_COMPD, // 41 - gAvrInt_TIMER4_OVF, // 42 - gAvrInt_TIMER4_FPF, // 43 -}; - -#endif - -//************************************************************************************************** -#if defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) -#pragma mark __AVR_AT90USB1286__ -//* teensy++ 2.0 -//* http://www.pjrc.com/teensy/pinout.html -#define _INTERRUPT_NAMES_DEFINED_ - - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_INT2, // 4 - gAvrInt_INT3, // 5 - gAvrInt_INT4, // 6 - gAvrInt_INT5, // 7 - gAvrInt_INT6, // 8 - gAvrInt_INT7, // 9 - gAvrInt_PCINT0, // 10 - gAvrInt_USB_General, // 11 - gAvrInt_USB_Endpoint, // 12 - gAvrInt_WDT, // 13 - gAvrInt_TIMER2_COMPA, // 14 - gAvrInt_TIMER2_COMPB, // 15 - gAvrInt_TIMER2_OVF, // 16 - gAvrInt_TIMER1_CAPT, // 17 - gAvrInt_TIMER1_COMPA, // 18 - gAvrInt_TIMER1_COMPB, // 19 - gAvrInt_TIMER1_COMPC, // 20 - gAvrInt_TIMER1_OVF, // 21 - gAvrInt_TIMER0_COMPA, // 22 - gAvrInt_TIMER0_COMPB, // 23 - gAvrInt_TIMER0_OVF, // 24 - gAvrInt_SPI_STC, // 25 - - gAvrInt_USART1_RX, // 26 - gAvrInt_USART1_UDRE, // 27 - gAvrInt_USART1_TX, // 28 - gAvrInt_ANALOG_COMP, // 29 - - gAvrInt_ADC, // 30 - gAvrInt_EE_READY, // 31 - - gAvrInt_TIMER3_CAPT, // 32 - gAvrInt_TIMER3_COMPA, // 33 - gAvrInt_TIMER3_COMPB, // 34 - gAvrInt_TIMER3_COMPC, // 35 - gAvrInt_TIMER3_OVF, // 36 - gAvrInt_TWI, // 37 - gAvrInt_SPM_READY, // 38 - -}; - -#endif - - - - -//************************************************************************************************** -#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega64__) -#pragma mark __AVR_ATmega64__ __AVR_ATmega128__ -#define _INTERRUPT_NAMES_DEFINED_ - - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_INT2, // 4 - gAvrInt_INT3, // 5 - gAvrInt_INT4, // 6 - gAvrInt_INT5, // 7 - gAvrInt_INT6, // 8 - gAvrInt_INT7, // 9 - gAvrInt_TIMER2_COMP, // 10 - gAvrInt_TIMER2_OVF, // 11 - gAvrInt_TIMER1_CAPT, // 12 - gAvrInt_TIMER1_COMPA, // 13 - gAvrInt_TIMER1_COMPB, // 14 - gAvrInt_TIMER1_OVF, // 15 - gAvrInt_TIMER0_COMP, // 16 - gAvrInt_TIMER0_OVF, // 17 - gAvrInt_SPI_STC, // 18 - gAvrInt_USART0_RX, // 19 - gAvrInt_USART0_UDRE, // 20 - gAvrInt_USART0_TX, // 21 - gAvrInt_ADC, // 22 - gAvrInt_EE_READY, // 23 - gAvrInt_ANALOG_COMP, // 24 - gAvrInt_TIMER1_COMPC, // 25 - gAvrInt_TIMER3_CAPT, // 26 - gAvrInt_TIMER3_COMPA, // 27 - gAvrInt_TIMER3_COMPB, // 28 - gAvrInt_TIMER3_COMPC, // 29 - gAvrInt_TIMER3_OVF, // 30 - gAvrInt_USART1_RX, // 31 - gAvrInt_USART1_UDRE, // 32 - gAvrInt_USART1_TX, // 33 - gAvrInt_TWI, // 34 - gAvrInt_SPM_READY, // 35 - -}; - -#endif - -//************************************************************************************************** -#if defined(__AVR_AT90CAN32__) || defined(__AVR_AT90CAN64__) || defined(__AVR_AT90CAN128__) -#pragma mark __AVR_AT90CAN32__ __AVR_AT90CAN64__ __AVR_AT90CAN128__ - -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - - gAvrInt_RESET, // 1 - gAvrInt_INT0, // 2 - gAvrInt_INT1, // 3 - gAvrInt_INT2, // 4 - gAvrInt_INT3, // 5 - gAvrInt_INT4, // 6 - gAvrInt_INT5, // 7 - gAvrInt_INT6, // 8 - gAvrInt_INT7, // 9 - gAvrInt_TIMER2_COMP, // 10 - gAvrInt_TIMER2_OVF, // 11 - gAvrInt_TIMER1_CAPT, // 12 - gAvrInt_TIMER1_COMPA, // 13 - gAvrInt_TIMER1_COMPB, // 14 - gAvrInt_TIMER1_COMPC, // 15 - gAvrInt_TIMER1_OVF, // 16 - gAvrInt_TIMER0_COMP, // 17 - gAvrInt_TIMER0_OVF, // 18 - gAvrInt_CAN_TrafnsferCE, // 19 - gAvrInt_CAN_TimerOverRun, // 20 - gAvrInt_SPI_STC, // 21 - gAvrInt_USART0_RX, // 22 - gAvrInt_USART0_UDRE, // 23 - gAvrInt_USART0_TX, // 24 - gAvrInt_ANALOG_COMP, // 25 - gAvrInt_ADC, // 26 - gAvrInt_EE_READY, // 27 - gAvrInt_TIMER3_CAPT, // 28 - gAvrInt_TIMER3_COMPA, // 29 - gAvrInt_TIMER3_COMPB, // 30 - gAvrInt_TIMER3_COMPC, // 31 - gAvrInt_TIMER3_OVF, // 32 - gAvrInt_USART1_RX, // 33 - gAvrInt_USART1_UDRE, // 34 - gAvrInt_USART1_TX, // 35 - gAvrInt_TWI, // 36 - gAvrInt_SPM_READY, // 37 -}; - -#endif - -//************************************************************************************************** -#if defined (__AVR_ATmega128RFA1__) -#pragma mark __AVR_ATmega128RFA1__ -#define _INTERRUPT_NAMES_DEFINED_ - -PGM_P gInterruptNameTable[] PROGMEM = -{ - //* Atmel changed the number scheme for interrupt vectors - gAvrInt_RESET, // 0 - gAvrInt_INT0, // 1 - gAvrInt_INT1, // 2 - gAvrInt_INT2, // 3 - gAvrInt_INT3, // 4 - gAvrInt_INT4, // 5 - gAvrInt_INT5, // 6 - gAvrInt_INT6, // 7 - gAvrInt_INT7, // 8 - gAvrInt_PCINT0, // 9 - gAvrInt_PCINT1, // 10 - gAvrInt_PCINT2, // 11 - gAvrInt_WDT, // 12 - gAvrInt_TIMER2_COMPA, // 13 - gAvrInt_TIMER2_COMPB, // 14 - gAvrInt_TIMER2_OVF, // 15 - gAvrInt_TIMER1_CAPT, // 16 - gAvrInt_TIMER1_COMPA, // 17 - gAvrInt_TIMER1_COMPB, // 18 - gAvrInt_TIMER1_COMPC, // 19 - gAvrInt_TIMER1_OVF, // 20 - gAvrInt_TIMER0_COMPA, // 21 - gAvrInt_TIMER0_COMPB, // 22 - gAvrInt_TIMER0_OVF, // 23 - gAvrInt_SPI_STC, // 24 - gAvrInt_USART0_RX, // 25 - gAvrInt_USART0_UDRE, // 26 - gAvrInt_USART0_TX, // 27 - gAvrInt_ANALOG_COMP, // 28 - gAvrInt_ADC, // 29 - gAvrInt_EE_READY, // 30 - gAvrInt_TIMER3_CAPT, // 31 - gAvrInt_TIMER3_COMPA, // 32 - gAvrInt_TIMER3_COMPB, // 33 - gAvrInt_TIMER3_COMPC, // 34 - gAvrInt_TIMER3_OVF, // 35 - gAvrInt_USART1_RX, // 36 - gAvrInt_USART1_UDRE, // 37 - gAvrInt_USART1_TX, // 38 - gAvrInt_TWI, // 39 - gAvrInt_SPM_READY, // 40 - gAvrInt_TIMER4_CAPT, // 41 - gAvrInt_TIMER4_COMPA, // 42 - gAvrInt_TIMER4_COMPB, // 43 - gAvrInt_TIMER4_COMPC, // 44 - gAvrInt_TIMER4_OVF, // 45 - gAvrInt_TIMER5_CAPT, // 46 - gAvrInt_TIMER5_COMPA, // 47 - gAvrInt_TIMER5_COMPB, // 48 - gAvrInt_TIMER5_COMPC, // 49 - gAvrInt_TIMER5_OVF, // 50 -#if 1 - gAvrInt_RESERVED, // 51 - gAvrInt_RESERVED, // 52 - gAvrInt_RESERVED, // 53 - - gAvrInt_RESERVED, // 54 - gAvrInt_RESERVED, // 55 - gAvrInt_RESERVED, // 56 - -#else - gAvrInt_USART2_RX, // 51 - gAvrInt_USART2_UDRE, // 52 - gAvrInt_USART2_TX, // 53 - - gAvrInt_USART3_RX, // 54 - gAvrInt_USART3_UDRE, // 55 - gAvrInt_USART3_TX, // 56 -#endif - gAvrInt_TRN_PLL_LOCK, // 57 - gAvrInt_TRN_PLL_UNLOCK, // 58 - gAvrInt_TRN_RX_START, // 59 - gAvrInt_TRN_RX_END, // 60 - gAvrInt_TRN_CAAED_DONE, // 61 - gAvrInt_TRN_FRAME_MATCH,// 62 - gAvrInt_TRN_TX_END, // 63 - gAvrInt_TRN_AWAKE, // 64 - - gAvrInt_SCNT_CMP1, // 65 - gAvrInt_SCNT_CMP2, // 66 - gAvrInt_SCNT_CMP3, // 67 - gAvrInt_SCNT_OVFL, // 68 - gAvrInt_SCNT_BACKOFF, // 69 - gAvrInt_AES_READY, // 70 - gAvrInt_BAT_LOW, // 71 - - -}; - -#endif - - -#if !defined(_INTERRUPT_NAMES_DEFINED_) - #warning No interrupt string defs for this cpu -#endif - diff --git a/bootloaders/stk500v2/command.h b/bootloaders/stk500v2/command.h deleted file mode 100644 index 03b1b38a..00000000 --- a/bootloaders/stk500v2/command.h +++ /dev/null @@ -1,114 +0,0 @@ -//**** ATMEL AVR - A P P L I C A T I O N N O T E ************************ -//* -//* Title: AVR068 - STK500 Communication Protocol -//* Filename: command.h -//* Version: 1.0 -//* Last updated: 31.01.2005 -//* -//* Support E-mail: avr@atmel.com -//* -//************************************************************************** - -// *****************[ STK message constants ]*************************** - -#define MESSAGE_START 0x1B //= ESC = 27 decimal -#define TOKEN 0x0E - -// *****************[ STK general command constants ]************************** - -#define CMD_SIGN_ON 0x01 -#define CMD_SET_PARAMETER 0x02 -#define CMD_GET_PARAMETER 0x03 -#define CMD_SET_DEVICE_PARAMETERS 0x04 -#define CMD_OSCCAL 0x05 -#define CMD_LOAD_ADDRESS 0x06 -#define CMD_FIRMWARE_UPGRADE 0x07 - - -// *****************[ STK ISP command constants ]****************************** - -#define CMD_ENTER_PROGMODE_ISP 0x10 -#define CMD_LEAVE_PROGMODE_ISP 0x11 -#define CMD_CHIP_ERASE_ISP 0x12 -#define CMD_PROGRAM_FLASH_ISP 0x13 -#define CMD_READ_FLASH_ISP 0x14 -#define CMD_PROGRAM_EEPROM_ISP 0x15 -#define CMD_READ_EEPROM_ISP 0x16 -#define CMD_PROGRAM_FUSE_ISP 0x17 -#define CMD_READ_FUSE_ISP 0x18 -#define CMD_PROGRAM_LOCK_ISP 0x19 -#define CMD_READ_LOCK_ISP 0x1A -#define CMD_READ_SIGNATURE_ISP 0x1B -#define CMD_READ_OSCCAL_ISP 0x1C -#define CMD_SPI_MULTI 0x1D - -// *****************[ STK PP command constants ]******************************* - -#define CMD_ENTER_PROGMODE_PP 0x20 -#define CMD_LEAVE_PROGMODE_PP 0x21 -#define CMD_CHIP_ERASE_PP 0x22 -#define CMD_PROGRAM_FLASH_PP 0x23 -#define CMD_READ_FLASH_PP 0x24 -#define CMD_PROGRAM_EEPROM_PP 0x25 -#define CMD_READ_EEPROM_PP 0x26 -#define CMD_PROGRAM_FUSE_PP 0x27 -#define CMD_READ_FUSE_PP 0x28 -#define CMD_PROGRAM_LOCK_PP 0x29 -#define CMD_READ_LOCK_PP 0x2A -#define CMD_READ_SIGNATURE_PP 0x2B -#define CMD_READ_OSCCAL_PP 0x2C - -#define CMD_SET_CONTROL_STACK 0x2D - -// *****************[ STK HVSP command constants ]***************************** - -#define CMD_ENTER_PROGMODE_HVSP 0x30 -#define CMD_LEAVE_PROGMODE_HVSP 0x31 -#define CMD_CHIP_ERASE_HVSP 0x32 -#define CMD_PROGRAM_FLASH_HVSP ` 0x33 -#define CMD_READ_FLASH_HVSP 0x34 -#define CMD_PROGRAM_EEPROM_HVSP 0x35 -#define CMD_READ_EEPROM_HVSP 0x36 -#define CMD_PROGRAM_FUSE_HVSP 0x37 -#define CMD_READ_FUSE_HVSP 0x38 -#define CMD_PROGRAM_LOCK_HVSP 0x39 -#define CMD_READ_LOCK_HVSP 0x3A -#define CMD_READ_SIGNATURE_HVSP 0x3B -#define CMD_READ_OSCCAL_HVSP 0x3C - -// *****************[ STK status constants ]*************************** - -// Success -#define STATUS_CMD_OK 0x00 - -// Warnings -#define STATUS_CMD_TOUT 0x80 -#define STATUS_RDY_BSY_TOUT 0x81 -#define STATUS_SET_PARAM_MISSING 0x82 - -// Errors -#define STATUS_CMD_FAILED 0xC0 -#define STATUS_CKSUM_ERROR 0xC1 -#define STATUS_CMD_UNKNOWN 0xC9 - -// *****************[ STK parameter constants ]*************************** -#define PARAM_BUILD_NUMBER_LOW 0x80 -#define PARAM_BUILD_NUMBER_HIGH 0x81 -#define PARAM_HW_VER 0x90 -#define PARAM_SW_MAJOR 0x91 -#define PARAM_SW_MINOR 0x92 -#define PARAM_VTARGET 0x94 -#define PARAM_VADJUST 0x95 -#define PARAM_OSC_PSCALE 0x96 -#define PARAM_OSC_CMATCH 0x97 -#define PARAM_SCK_DURATION 0x98 -#define PARAM_TOPCARD_DETECT 0x9A -#define PARAM_STATUS 0x9C -#define PARAM_DATA 0x9D -#define PARAM_RESET_POLARITY 0x9E -#define PARAM_CONTROLLER_INIT 0x9F - -// *****************[ STK answer constants ]*************************** - -#define ANSWER_CKSUM_ERROR 0xB0 - diff --git a/bootloaders/stk500v2/stk500boot.c b/bootloaders/stk500v2/stk500boot.c deleted file mode 100644 index 0b49dffc..00000000 --- a/bootloaders/stk500v2/stk500boot.c +++ /dev/null @@ -1,2122 +0,0 @@ -/***************************************************************************** -Title: STK500v2 compatible bootloader - Modified for Wiring board ATMega128-16MHz -Author: Peter Fleury http://jump.to/fleury -Compiler: avr-gcc 3.4.5 or 4.1 / avr-libc 1.4.3 -Hardware: All AVRs with bootloader support, tested with ATmega8 -License: GNU General Public License - -Modified: Worapoht Kornkaewwattanakul http://www.avride.com -Date: 17 October 2007 -Update: 1st, 29 Dec 2007 : Enable CMD_SPI_MULTI but ignore unused command by return 0x00 byte response.. -Compiler: WINAVR20060421 -Description: add timeout feature like previous Wiring bootloader - -DESCRIPTION: - This program allows an AVR with bootloader capabilities to - read/write its own Flash/EEprom. To enter Programming mode - an input pin is checked. If this pin is pulled low, programming mode - is entered. If not, normal execution is done from $0000 - "reset" vector in Application area. - Size fits into a 1024 word bootloader section - when compiled with avr-gcc 4.1 - (direct replace on Wiring Board without fuse setting changed) - -USAGE: - - Set AVR MCU type and clock-frequency (F_CPU) in the Makefile. - - Set baud rate below (AVRISP only works with 115200 bps) - - compile/link the bootloader with the supplied Makefile - - program the "Boot Flash section size" (BOOTSZ fuses), - for boot-size 1024 words: program BOOTSZ01 - - enable the BOOT Reset Vector (program BOOTRST) - - Upload the hex file to the AVR using any ISP programmer - - Program Boot Lock Mode 3 (program BootLock 11 and BootLock 12 lock bits) // (leave them) - - Reset your AVR while keeping PROG_PIN pulled low // (for enter bootloader by switch) - - Start AVRISP Programmer (AVRStudio/Tools/Program AVR) - - AVRISP will detect the bootloader - - Program your application FLASH file and optional EEPROM file using AVRISP - -Note: - Erasing the device without flashing, through AVRISP GUI button "Erase Device" - is not implemented, due to AVRStudio limitations. - Flash is always erased before programming. - - AVRdude: - Please uncomment #define REMOVE_CMD_SPI_MULTI when using AVRdude. - Comment #define REMOVE_PROGRAM_LOCK_BIT_SUPPORT to reduce code size - Read Fuse Bits and Read/Write Lock Bits is not supported - -NOTES: - Based on Atmel Application Note AVR109 - Self-programming - Based on Atmel Application Note AVR068 - STK500v2 Protocol - -LICENSE: - Copyright (C) 2006 Peter Fleury - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - -*****************************************************************************/ - -//************************************************************************ -//* Edit History -//************************************************************************ -//* Jul 7, 2010 = Mark Sproul msproul@skycharoit.com -//* Jul 7, 2010 Working on mega2560. No Auto-restart -//* Jul 7, 2010 Switched to 8K bytes (4K words) so that we have room for the monitor -//* Jul 8, 2010 Found older version of source that had auto restart, put that code back in -//* Jul 8, 2010 Adding monitor code -//* Jul 11, 2010 Added blinking LED while waiting for download to start -//* Jul 11, 2010 Added EEPROM test -//* Jul 29, 2010 Added recchar_timeout for timing out on bootloading -//* Aug 23, 2010 Added support for atmega2561 -//* Aug 26, 2010 Removed support for BOOT_BY_SWITCH -//* Sep 8, 2010 Added support for atmega16 -//* Nov 9, 2010 Issue 392:Fixed bug that 3 !!! in code would cause it to jump to monitor -//* Jun 24, 2011 Removed analogRead (was not used) -//* Dec 29, 2011 Issue 181: added watch dog timmer support -//* Dec 29, 2011 Issue 505: bootloader is comparing the seqNum to 1 or the current sequence -//* Jan 1, 2012 Issue 543: CMD_CHIP_ERASE_ISP now returns STATUS_CMD_FAILED instead of STATUS_CMD_OK -//* Jan 1, 2012 Issue 543: Write EEPROM now does something (NOT TESTED) -//* Jan 1, 2012 Issue 544: stk500v2 bootloader doesn't support reading fuses -//************************************************************************ - -//************************************************************************ -//* these are used to test issues -//* http://code.google.com/p/arduino/issues/detail?id=505 -//* Reported by mark.stubbs, Mar 14, 2011 -//* The STK500V2 bootloader is comparing the seqNum to 1 or the current sequence -//* (IE: Requiring the sequence to be 1 or match seqNum before continuing). -//* The correct behavior is for the STK500V2 to accept the PC's sequence number, and echo it back for the reply message. -#define _FIX_ISSUE_505_ -//************************************************************************ -//* Issue 181: added watch dog timmer support -#define _FIX_ISSUE_181_ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "command.h" - - -#if defined(_MEGA_BOARD_) || defined(_BOARD_AMBER128_) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) \ - || defined(__AVR_ATmega2561__) || defined(__AVR_ATmega1284P__) || defined(ENABLE_MONITOR) - #undef ENABLE_MONITOR - #define ENABLE_MONITOR - static void RunMonitor(void); -#endif - -#ifndef EEWE - #define EEWE 1 -#endif -#ifndef EEMWE - #define EEMWE 2 -#endif - -//#define _DEBUG_SERIAL_ -//#define _DEBUG_WITH_LEDS_ - - -/* - * Uncomment the following lines to save code space - */ -//#define REMOVE_PROGRAM_LOCK_BIT_SUPPORT // disable program lock bits -//#define REMOVE_BOOTLOADER_LED // no LED to show active bootloader -//#define REMOVE_CMD_SPI_MULTI // disable processing of SPI_MULTI commands, Remark this line for AVRDUDE -// - - - -//************************************************************************ -//* LED on pin "PROGLED_PIN" on port "PROGLED_PORT" -//* indicates that bootloader is active -//* PG2 -> LED on Wiring board -//************************************************************************ -#define BLINK_LED_WHILE_WAITING - -#ifdef _MEGA_BOARD_ - #define PROGLED_PORT PORTB - #define PROGLED_DDR DDRB - #define PROGLED_PIN PINB7 -#elif defined( _BOARD_AMBER128_ ) - //* this is for the amber 128 http://www.soc-robotics.com/ - //* onbarod led is PORTE4 - #define PROGLED_PORT PORTD - #define PROGLED_DDR DDRD - #define PROGLED_PIN PINE7 -#elif defined( _CEREBOTPLUS_BOARD_ ) || defined(_CEREBOT_II_BOARD_) - //* this is for the Cerebot 2560 board and the Cerebot-ii - //* onbarod leds are on PORTE4-7 - #define PROGLED_PORT PORTE - #define PROGLED_DDR DDRE - #define PROGLED_PIN PINE7 -#elif defined( _PENGUINO_ ) - //* this is for the Penguino - //* onbarod led is PORTE4 - #define PROGLED_PORT PORTC - #define PROGLED_DDR DDRC - #define PROGLED_PIN PINC6 -#elif defined( _ANDROID_2561_ ) || defined( __AVR_ATmega2561__ ) - //* this is for the Boston Android 2561 - //* onbarod led is PORTE4 - #define PROGLED_PORT PORTA - #define PROGLED_DDR DDRA - #define PROGLED_PIN PINA3 -#elif defined( _BOARD_MEGA16 ) - //* onbarod led is PORTA7 - #define PROGLED_PORT PORTA - #define PROGLED_DDR DDRA - #define PROGLED_PIN PINA7 - #define UART_BAUDRATE_DOUBLE_SPEED 0 - -#elif defined( _BOARD_BAHBOT_ ) - //* dosent have an onboard LED but this is what will probably be added to this port - #define PROGLED_PORT PORTB - #define PROGLED_DDR DDRB - #define PROGLED_PIN PINB0 - -#elif defined( _BOARD_ROBOTX_ ) - #define PROGLED_PORT PORTB - #define PROGLED_DDR DDRB - #define PROGLED_PIN PINB6 -#elif defined( _BOARD_CUSTOM1284_BLINK_B0_ ) - #define PROGLED_PORT PORTB - #define PROGLED_DDR DDRB - #define PROGLED_PIN PINB0 -#elif defined( _BOARD_CUSTOM1284_ ) - #define PROGLED_PORT PORTD - #define PROGLED_DDR DDRD - #define PROGLED_PIN PIND5 -#elif defined( _AVRLIP_ ) - #define PROGLED_PORT PORTB - #define PROGLED_DDR DDRB - #define PROGLED_PIN PINB5 -#elif defined( _BOARD_STK500_ ) - #define PROGLED_PORT PORTA - #define PROGLED_DDR DDRA - #define PROGLED_PIN PINA7 -#elif defined( _BOARD_STK502_ ) - #define PROGLED_PORT PORTB - #define PROGLED_DDR DDRB - #define PROGLED_PIN PINB5 -#elif defined( _BOARD_STK525_ ) - #define PROGLED_PORT PORTB - #define PROGLED_DDR DDRB - #define PROGLED_PIN PINB7 -#else - #define PROGLED_PORT PORTG - #define PROGLED_DDR DDRG - #define PROGLED_PIN PING2 -#endif - - - -/* - * define CPU frequency in Mhz here if not defined in Makefile - */ -#ifndef F_CPU - #define F_CPU 16000000UL -#endif - -#define _BLINK_LOOP_COUNT_ (F_CPU / 2250) -/* - * UART Baudrate, AVRStudio AVRISP only accepts 115200 bps - */ - -#ifndef BAUDRATE - #define BAUDRATE 115200 -#endif - -/* - * Enable (1) or disable (0) USART double speed operation - */ -#ifndef UART_BAUDRATE_DOUBLE_SPEED - #if defined (__AVR_ATmega32__) - #define UART_BAUDRATE_DOUBLE_SPEED 0 - #else - #define UART_BAUDRATE_DOUBLE_SPEED 1 - #endif -#endif - -/* - * HW and SW version, reported to AVRISP, must match version of AVRStudio - */ -#define CONFIG_PARAM_BUILD_NUMBER_LOW 0 -#define CONFIG_PARAM_BUILD_NUMBER_HIGH 0 -#define CONFIG_PARAM_HW_VER 0x0F -#define CONFIG_PARAM_SW_MAJOR 2 -#define CONFIG_PARAM_SW_MINOR 0x0A - -/* - * Calculate the address where the bootloader starts from FLASHEND and BOOTSIZE - * (adjust BOOTSIZE below and BOOTLOADER_ADDRESS in Makefile if you want to change the size of the bootloader) - */ -//#define BOOTSIZE 1024 -#if FLASHEND > 0x0F000 - #define BOOTSIZE 8192 -#else - #define BOOTSIZE 2048 -#endif - -#define APP_END (FLASHEND -(2*BOOTSIZE) + 1) - -/* - * Signature bytes are not available in avr-gcc io_xxx.h - */ -#if defined (__AVR_ATmega8__) - #define SIGNATURE_BYTES 0x1E9307 -#elif defined (__AVR_ATmega16__) - #define SIGNATURE_BYTES 0x1E9403 -#elif defined (__AVR_ATmega32__) - #define SIGNATURE_BYTES 0x1E9502 -#elif defined (__AVR_ATmega8515__) - #define SIGNATURE_BYTES 0x1E9306 -#elif defined (__AVR_ATmega8535__) - #define SIGNATURE_BYTES 0x1E9308 -#elif defined (__AVR_ATmega162__) - #define SIGNATURE_BYTES 0x1E9404 -#elif defined (__AVR_ATmega128__) - #define SIGNATURE_BYTES 0x1E9702 -#elif defined (__AVR_ATmega1280__) - #define SIGNATURE_BYTES 0x1E9703 -#elif defined (__AVR_ATmega2560__) - #define SIGNATURE_BYTES 0x1E9801 -#elif defined (__AVR_ATmega2561__) - #define SIGNATURE_BYTES 0x1e9802 -#elif defined (__AVR_ATmega1284P__) - #define SIGNATURE_BYTES 0x1e9705 -#elif defined (__AVR_ATmega640__) - #define SIGNATURE_BYTES 0x1e9608 -#elif defined (__AVR_ATmega64__) - #define SIGNATURE_BYTES 0x1E9602 -#elif defined (__AVR_ATmega169__) - #define SIGNATURE_BYTES 0x1e9405 -#elif defined (__AVR_AT90USB1287__) - #define SIGNATURE_BYTES 0x1e9782 -#else - #error "no signature definition for MCU available" -#endif - - -#if defined(_BOARD_ROBOTX_) || defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) - #define UART_BAUD_RATE_LOW UBRR1L - #define UART_STATUS_REG UCSR1A - #define UART_CONTROL_REG UCSR1B - #define UART_ENABLE_TRANSMITTER TXEN1 - #define UART_ENABLE_RECEIVER RXEN1 - #define UART_TRANSMIT_COMPLETE TXC1 - #define UART_RECEIVE_COMPLETE RXC1 - #define UART_DATA_REG UDR1 - #define UART_DOUBLE_SPEED U2X1 - -#elif defined(__AVR_ATmega8__) || defined(__AVR_ATmega16__) || defined(__AVR_ATmega32__) \ - || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega8535__) - /* ATMega8 with one USART */ - #define UART_BAUD_RATE_LOW UBRRL - #define UART_STATUS_REG UCSRA - #define UART_CONTROL_REG UCSRB - #define UART_ENABLE_TRANSMITTER TXEN - #define UART_ENABLE_RECEIVER RXEN - #define UART_TRANSMIT_COMPLETE TXC - #define UART_RECEIVE_COMPLETE RXC - #define UART_DATA_REG UDR - #define UART_DOUBLE_SPEED U2X - -#elif defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega162__) \ - || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega2561__) - /* ATMega with two USART, use UART0 */ - #define UART_BAUD_RATE_LOW UBRR0L - #define UART_STATUS_REG UCSR0A - #define UART_CONTROL_REG UCSR0B - #define UART_ENABLE_TRANSMITTER TXEN0 - #define UART_ENABLE_RECEIVER RXEN0 - #define UART_TRANSMIT_COMPLETE TXC0 - #define UART_RECEIVE_COMPLETE RXC0 - #define UART_DATA_REG UDR0 - #define UART_DOUBLE_SPEED U2X0 -#elif defined(UBRR0L) && defined(UCSR0A) && defined(TXEN0) - /* ATMega with two USART, use UART0 */ - #define UART_BAUD_RATE_LOW UBRR0L - #define UART_STATUS_REG UCSR0A - #define UART_CONTROL_REG UCSR0B - #define UART_ENABLE_TRANSMITTER TXEN0 - #define UART_ENABLE_RECEIVER RXEN0 - #define UART_TRANSMIT_COMPLETE TXC0 - #define UART_RECEIVE_COMPLETE RXC0 - #define UART_DATA_REG UDR0 - #define UART_DOUBLE_SPEED U2X0 -#elif defined(UBRRL) && defined(UCSRA) && defined(UCSRB) && defined(TXEN) && defined(RXEN) - //* catch all - #define UART_BAUD_RATE_LOW UBRRL - #define UART_STATUS_REG UCSRA - #define UART_CONTROL_REG UCSRB - #define UART_ENABLE_TRANSMITTER TXEN - #define UART_ENABLE_RECEIVER RXEN - #define UART_TRANSMIT_COMPLETE TXC - #define UART_RECEIVE_COMPLETE RXC - #define UART_DATA_REG UDR - #define UART_DOUBLE_SPEED U2X -#else - #error "no UART definition for MCU available" -#endif - - - -/* - * Macro to calculate UBBR from XTAL and baudrate - */ -#if defined(__AVR_ATmega32__) && UART_BAUDRATE_DOUBLE_SPEED - #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu / 4 / baudRate - 1) / 2) -#elif defined(__AVR_ATmega32__) - #define UART_BAUD_SELECT(baudRate,xtalCpu) ((xtalCpu / 8 / baudRate - 1) / 2) -#elif UART_BAUDRATE_DOUBLE_SPEED - #define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*8.0)-1.0+0.5) -#else - #define UART_BAUD_SELECT(baudRate,xtalCpu) (((float)(xtalCpu))/(((float)(baudRate))*16.0)-1.0+0.5) -#endif - - -/* - * States used in the receive state machine - */ -#define ST_START 0 -#define ST_GET_SEQ_NUM 1 -#define ST_MSG_SIZE_1 2 -#define ST_MSG_SIZE_2 3 -#define ST_GET_TOKEN 4 -#define ST_GET_DATA 5 -#define ST_GET_CHECK 6 -#define ST_PROCESS 7 - -/* - * use 16bit address variable for ATmegas with <= 64K flash - */ -#if defined(RAMPZ) - typedef uint32_t address_t; -#else - typedef uint16_t address_t; -#endif - -/* - * function prototypes - */ -static void sendchar(char c); -static unsigned char recchar(void); - -/* - * since this bootloader is not linked against the avr-gcc crt1 functions, - * to reduce the code size, we need to provide our own initialization - */ -void __jumpMain (void) __attribute__ ((naked)) __attribute__ ((section (".init9"))); -#include - -//#define SPH_REG 0x3E -//#define SPL_REG 0x3D - -//***************************************************************************** -void __jumpMain(void) -{ -//* July 17, 2010 Added stack pointer initialzation -//* the first line did not do the job on the ATmega128 - - asm volatile ( ".set __stack, %0" :: "i" (RAMEND) ); - -//* set stack pointer to top of RAM - - asm volatile ( "ldi 16, %0" :: "i" (RAMEND >> 8) ); - asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_HI_ADDR) ); - - asm volatile ( "ldi 16, %0" :: "i" (RAMEND & 0x0ff) ); - asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_LO_ADDR) ); - - asm volatile ( "clr __zero_reg__" ); // GCC depends on register r1 set to 0 - asm volatile ( "out %0, __zero_reg__" :: "I" (_SFR_IO_ADDR(SREG)) ); // set SREG to 0 - asm volatile ( "jmp main"); // jump to main() -} - - -//***************************************************************************** -void delay_ms(unsigned int timedelay) -{ - unsigned int i; - for (i=0;i> 1) -//***************************************************************************** -static unsigned char recchar_timeout(void) -{ -uint32_t count = 0; - - while (!(UART_STATUS_REG & (1 << UART_RECEIVE_COMPLETE))) - { - // wait for data - count++; - if (count > MAX_TIME_COUNT) - { - unsigned int data; - #if (FLASHEND > 0x10000) - data = pgm_read_word_far(0); //* get the first word of the user program - #else - data = pgm_read_word_near(0); //* get the first word of the user program - #endif - if (data != 0xffff) //* make sure its valid before jumping to it. - { - asm volatile( - "clr r30 \n\t" - "clr r31 \n\t" - "ijmp \n\t" - ); - } - count = 0; - } - } - return UART_DATA_REG; -} - -//* for watch dog timer startup -void (*app_start)(void) = 0x0000; - - -//***************************************************************************** -int main(void) -{ - address_t address = 0; - address_t eraseAddress = 0; - unsigned char msgParseState; - unsigned int ii = 0; - unsigned char checksum = 0; - unsigned char seqNum = 0; - unsigned int msgLength = 0; - unsigned char msgBuffer[285]; - unsigned char c, *p; - unsigned char isLeave = 0; - - unsigned long boot_timeout; - unsigned long boot_timer; - unsigned int boot_state; -#ifdef ENABLE_MONITOR - unsigned int exPointCntr = 0; - unsigned int rcvdCharCntr = 0; -#endif - - //* some chips dont set the stack properly - asm volatile ( ".set __stack, %0" :: "i" (RAMEND) ); - asm volatile ( "ldi 16, %0" :: "i" (RAMEND >> 8) ); - asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_HI_ADDR) ); - asm volatile ( "ldi 16, %0" :: "i" (RAMEND & 0x0ff) ); - asm volatile ( "out %0,16" :: "i" (AVR_STACK_POINTER_LO_ADDR) ); - -#ifdef _FIX_ISSUE_181_ - //************************************************************************ - //* Dec 29, 2011 Issue #181, added watch dog timmer support - //* handle the watch dog timer - uint8_t mcuStatusReg; - mcuStatusReg = MCUSR; - - __asm__ __volatile__ ("cli"); - __asm__ __volatile__ ("wdr"); - MCUSR = 0; - WDTCSR |= _BV(WDCE) | _BV(WDE); - WDTCSR = 0; - __asm__ __volatile__ ("sei"); - // check if WDT generated the reset, if so, go straight to app - if (mcuStatusReg & _BV(WDRF)) - { - app_start(); - } - //************************************************************************ -#endif - - - boot_timer = 0; - boot_state = 0; - -#ifdef BLINK_LED_WHILE_WAITING -// boot_timeout = 90000; //* should be about 4 seconds -// boot_timeout = 170000; - boot_timeout = 20000; //* should be about 1 second -#else - boot_timeout = 3500000; // 7 seconds , approx 2us per step when optimize "s" -#endif - /* - * Branch to bootloader or application code ? - */ - -#ifndef REMOVE_BOOTLOADER_LED - /* PROG_PIN pulled low, indicate with LED that bootloader is active */ - PROGLED_DDR |= (1< boot_timeout) - { - boot_state = 1; // (after ++ -> boot_state=2 bootloader timeout, jump to main 0x00000 ) - } - #ifdef BLINK_LED_WHILE_WAITING - if ((boot_timer % _BLINK_LOOP_COUNT_) == 0) - { - //* toggle the LED - PROGLED_PORT ^= (1<> 16) & 0x000000FF; - } - else if ( signatureIndex == 1 ) - { - answerByte = (SIGNATURE_BYTES >> 8) & 0x000000FF; - } - else - { - answerByte = SIGNATURE_BYTES & 0x000000FF; - } - } - else if ( msgBuffer[4] & 0x50 ) - { - //* Issue 544: stk500v2 bootloader doesn't support reading fuses - //* I cant find the docs that say what these are supposed to be but this was figured out by trial and error - // answerByte = boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS); - // answerByte = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); - // answerByte = boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS); - if (msgBuffer[4] == 0x50) - { - answerByte = boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS); - } - else if (msgBuffer[4] == 0x58) - { - answerByte = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); - } - else - { - answerByte = 0; - } - } - else - { - answerByte = 0; // for all others command are not implemented, return dummy value for AVRDUDE happy - } - if ( !flag ) - { - msgLength = 7; - msgBuffer[1] = STATUS_CMD_OK; - msgBuffer[2] = 0; - msgBuffer[3] = msgBuffer[4]; - msgBuffer[4] = 0; - msgBuffer[5] = answerByte; - msgBuffer[6] = STATUS_CMD_OK; - } - } - break; - #endif - case CMD_SIGN_ON: - msgLength = 11; - msgBuffer[1] = STATUS_CMD_OK; - msgBuffer[2] = 8; - msgBuffer[3] = 'A'; - msgBuffer[4] = 'V'; - msgBuffer[5] = 'R'; - msgBuffer[6] = 'I'; - msgBuffer[7] = 'S'; - msgBuffer[8] = 'P'; - msgBuffer[9] = '_'; - msgBuffer[10] = '2'; - break; - - case CMD_GET_PARAMETER: - { - unsigned char value; - - switch(msgBuffer[1]) - { - case PARAM_BUILD_NUMBER_LOW: - value = CONFIG_PARAM_BUILD_NUMBER_LOW; - break; - case PARAM_BUILD_NUMBER_HIGH: - value = CONFIG_PARAM_BUILD_NUMBER_HIGH; - break; - case PARAM_HW_VER: - value = CONFIG_PARAM_HW_VER; - break; - case PARAM_SW_MAJOR: - value = CONFIG_PARAM_SW_MAJOR; - break; - case PARAM_SW_MINOR: - value = CONFIG_PARAM_SW_MINOR; - break; - default: - value = 0; - break; - } - msgLength = 3; - msgBuffer[1] = STATUS_CMD_OK; - msgBuffer[2] = value; - } - break; - - case CMD_LEAVE_PROGMODE_ISP: - isLeave = 1; - //* fall thru - - case CMD_SET_PARAMETER: - case CMD_ENTER_PROGMODE_ISP: - msgLength = 2; - msgBuffer[1] = STATUS_CMD_OK; - break; - - case CMD_READ_SIGNATURE_ISP: - { - unsigned char signatureIndex = msgBuffer[4]; - unsigned char signature; - - if ( signatureIndex == 0 ) - signature = (SIGNATURE_BYTES >>16) & 0x000000FF; - else if ( signatureIndex == 1 ) - signature = (SIGNATURE_BYTES >> 8) & 0x000000FF; - else - signature = SIGNATURE_BYTES & 0x000000FF; - - msgLength = 4; - msgBuffer[1] = STATUS_CMD_OK; - msgBuffer[2] = signature; - msgBuffer[3] = STATUS_CMD_OK; - } - break; - - case CMD_READ_LOCK_ISP: - msgLength = 4; - msgBuffer[1] = STATUS_CMD_OK; - msgBuffer[2] = boot_lock_fuse_bits_get( GET_LOCK_BITS ); - msgBuffer[3] = STATUS_CMD_OK; - break; - - case CMD_READ_FUSE_ISP: - { - unsigned char fuseBits; - - if ( msgBuffer[2] == 0x50 ) - { - if ( msgBuffer[3] == 0x08 ) - fuseBits = boot_lock_fuse_bits_get( GET_EXTENDED_FUSE_BITS ); - else - fuseBits = boot_lock_fuse_bits_get( GET_LOW_FUSE_BITS ); - } - else - { - fuseBits = boot_lock_fuse_bits_get( GET_HIGH_FUSE_BITS ); - } - msgLength = 4; - msgBuffer[1] = STATUS_CMD_OK; - msgBuffer[2] = fuseBits; - msgBuffer[3] = STATUS_CMD_OK; - } - break; - - #ifndef REMOVE_PROGRAM_LOCK_BIT_SUPPORT - case CMD_PROGRAM_LOCK_ISP: - { - unsigned char lockBits = msgBuffer[4]; - - lockBits = (~lockBits) & 0x3C; // mask BLBxx bits - boot_lock_bits_set(lockBits); // and program it - boot_spm_busy_wait(); - - msgLength = 3; - msgBuffer[1] = STATUS_CMD_OK; - msgBuffer[2] = STATUS_CMD_OK; - } - break; - #endif - case CMD_CHIP_ERASE_ISP: - eraseAddress = 0; - msgLength = 2; - // msgBuffer[1] = STATUS_CMD_OK; - msgBuffer[1] = STATUS_CMD_FAILED; //* isue 543, return FAILED instead of OK - break; - - case CMD_LOAD_ADDRESS: - #if defined(RAMPZ) - address = ( ((address_t)(msgBuffer[1])<<24)|((address_t)(msgBuffer[2])<<16)|((address_t)(msgBuffer[3])<<8)|(msgBuffer[4]) )<<1; - #else - address = ( ((msgBuffer[3])<<8)|(msgBuffer[4]) )<<1; //convert word to byte address - #endif - msgLength = 2; - msgBuffer[1] = STATUS_CMD_OK; - break; - - case CMD_PROGRAM_FLASH_ISP: - case CMD_PROGRAM_EEPROM_ISP: - { - unsigned int size = ((msgBuffer[1])<<8) | msgBuffer[2]; - unsigned char *p = msgBuffer+10; - unsigned int data; - unsigned char highByte, lowByte; - address_t tempaddress = address; - - - if ( msgBuffer[0] == CMD_PROGRAM_FLASH_ISP ) - { - // erase only main section (bootloader protection) - if (eraseAddress < APP_END ) - { - boot_page_erase(eraseAddress); // Perform page erase - boot_spm_busy_wait(); // Wait until the memory is erased. - eraseAddress += SPM_PAGESIZE; // point to next page to be erase - } - - /* Write FLASH */ - do { - lowByte = *p++; - highByte = *p++; - - data = (highByte << 8) | lowByte; - boot_page_fill(address,data); - - address = address + 2; // Select next word in memory - size -= 2; // Reduce number of bytes to write by two - } while (size); // Loop until all bytes written - - boot_page_write(tempaddress); - boot_spm_busy_wait(); - boot_rww_enable(); // Re-enable the RWW section - } - else - { - //* issue 543, this should work, It has not been tested. - uint16_t ii = address >> 1; - /* write EEPROM */ - while (size) { - eeprom_write_byte((uint8_t*)ii, *p++); - address+=2; // Select next EEPROM byte - ii++; - size--; - } - } - msgLength = 2; - msgBuffer[1] = STATUS_CMD_OK; - } - break; - - case CMD_READ_FLASH_ISP: - case CMD_READ_EEPROM_ISP: - { - unsigned int size = ((msgBuffer[1])<<8) | msgBuffer[2]; - unsigned char *p = msgBuffer+1; - msgLength = size+3; - - *p++ = STATUS_CMD_OK; - if (msgBuffer[0] == CMD_READ_FLASH_ISP ) - { - unsigned int data; - - // Read FLASH - do { - //#if defined(RAMPZ) - #if (FLASHEND > 0x10000) - data = pgm_read_word_far(address); - #else - data = pgm_read_word_near(address); - #endif - *p++ = (unsigned char)data; //LSB - *p++ = (unsigned char)(data >> 8); //MSB - address += 2; // Select next word in memory - size -= 2; - }while (size); - } - else - { - /* Read EEPROM */ - do { - EEARL = address; // Setup EEPROM address - EEARH = ((address >> 8)); - address++; // Select next EEPROM byte - EECR |= (1<>8)&0xFF); - sendchar(c); - checksum ^= c; - - c = msgLength&0x00FF; - sendchar(c); - checksum ^= c; - - sendchar(TOKEN); - checksum ^= TOKEN; - - p = msgBuffer; - while ( msgLength ) - { - c = *p++; - sendchar(c); - checksum ^=c; - msgLength--; - } - sendchar(checksum); - seqNum++; - - #ifndef REMOVE_BOOTLOADER_LED - //* toggle the LED - PROGLED_PORT ^= (1< - - -base address = f000 -avrdude: Device signature = 0x1e9703 -avrdude: safemode: lfuse reads as FF -avrdude: safemode: hfuse reads as D8 -avrdude: safemode: efuse reads as F5 -avrdude> -*/ - -//************************************************************************ -#ifdef ENABLE_MONITOR -#include - -unsigned long gRamIndex; -unsigned long gFlashIndex; -unsigned long gEepromIndex; - - -#define true 1 -#define false 0 - -#include "avr_cpunames.h" - -#ifndef _AVR_CPU_NAME_ - #error cpu name not defined -#endif - -#ifdef _VECTORS_SIZE - #define kInterruptVectorCount (_VECTORS_SIZE / 4) -#else - #define kInterruptVectorCount 23 -#endif - - -void PrintDecInt(int theNumber, int digitCnt); - -#ifdef _AVR_CPU_NAME_ - const char gTextMsg_CPU_Name[] PROGMEM = _AVR_CPU_NAME_; -#else - const char gTextMsg_CPU_Name[] PROGMEM = "UNKNOWN"; -#endif - - const char gTextMsg_Explorer[] PROGMEM = "Arduino explorer stk500V2 by MLS"; - const char gTextMsg_Prompt[] PROGMEM = "Bootloader>"; - const char gTextMsg_HUH[] PROGMEM = "Huh?"; - const char gTextMsg_COMPILED_ON[] PROGMEM = "Compiled on = "; - const char gTextMsg_CPU_Type[] PROGMEM = "CPU Type = "; - const char gTextMsg_AVR_ARCH[] PROGMEM = "__AVR_ARCH__= "; - const char gTextMsg_AVR_LIBC[] PROGMEM = "AVR LibC Ver= "; - const char gTextMsg_GCC_VERSION[] PROGMEM = "GCC Version = "; - const char gTextMsg_CPU_SIGNATURE[] PROGMEM = "CPU ID = "; - const char gTextMsg_FUSE_BYTE_LOW[] PROGMEM = "Low fuse = "; - const char gTextMsg_FUSE_BYTE_HIGH[] PROGMEM = "High fuse = "; - const char gTextMsg_FUSE_BYTE_EXT[] PROGMEM = "Ext fuse = "; - const char gTextMsg_FUSE_BYTE_LOCK[] PROGMEM = "Lock fuse = "; - const char gTextMsg_GCC_DATE_STR[] PROGMEM = __DATE__; - const char gTextMsg_AVR_LIBC_VER_STR[] PROGMEM = __AVR_LIBC_VERSION_STRING__; - const char gTextMsg_GCC_VERSION_STR[] PROGMEM = __VERSION__; - const char gTextMsg_VECTOR_HEADER[] PROGMEM = "V# ADDR op code instruction addr Interrupt"; - const char gTextMsg_noVector[] PROGMEM = "no vector"; - const char gTextMsg_rjmp[] PROGMEM = "rjmp "; - const char gTextMsg_jmp[] PROGMEM = "jmp "; - const char gTextMsg_WHAT_PORT[] PROGMEM = "What port:"; - const char gTextMsg_PortNotSupported[] PROGMEM = "Port not supported"; - const char gTextMsg_MustBeLetter[] PROGMEM = "Must be a letter"; - const char gTextMsg_SPACE[] PROGMEM = " "; - const char gTextMsg_WriteToEEprom[] PROGMEM = "Writting EE"; - const char gTextMsg_ReadingEEprom[] PROGMEM = "Reading EE"; - const char gTextMsg_EEPROMerrorCnt[] PROGMEM = "EE err cnt="; - const char gTextMsg_PORT[] PROGMEM = "PORT"; - - -//************************************************************************ -//* Help messages - const char gTextMsg_HELP_MSG_0[] PROGMEM = "0=Zero addr"; - const char gTextMsg_HELP_MSG_QM[] PROGMEM = "?=CPU stats"; - const char gTextMsg_HELP_MSG_AT[] PROGMEM = "@=EEPROM test"; - const char gTextMsg_HELP_MSG_B[] PROGMEM = "B=Blink LED"; - const char gTextMsg_HELP_MSG_E[] PROGMEM = "E=Dump EEPROM"; - const char gTextMsg_HELP_MSG_F[] PROGMEM = "F=Dump FLASH"; - const char gTextMsg_HELP_MSG_H[] PROGMEM = "H=Help"; - const char gTextMsg_HELP_MSG_L[] PROGMEM = "L=List I/O Ports"; -// const char gTextMsg_HELP_MSG_Q[] PROGMEM = "Q=Quit & jump to user pgm"; - const char gTextMsg_HELP_MSG_Q[] PROGMEM = "Q=Quit"; - const char gTextMsg_HELP_MSG_R[] PROGMEM = "R=Dump RAM"; - const char gTextMsg_HELP_MSG_V[] PROGMEM = "V=show interrupt Vectors"; - const char gTextMsg_HELP_MSG_Y[] PROGMEM = "Y=Port blink"; - - const char gTextMsg_END[] PROGMEM = "*"; - - -//************************************************************************ -void PrintFromPROGMEM(const void *dataPtr, unsigned char offset) -{ -char theChar; - - dataPtr += offset; - - do { - #if (FLASHEND > 0x10000) - theChar = pgm_read_byte_far((uint16_t)dataPtr++); - #else - theChar = pgm_read_byte_near((uint16_t)dataPtr++); - #endif - if (theChar != 0) - { - sendchar(theChar); - } - } while (theChar != 0); -} - -//************************************************************************ -void PrintNewLine(void) -{ - sendchar(0x0d); - sendchar(0x0a); -} - - -//************************************************************************ -void PrintFromPROGMEMln(const void *dataPtr, unsigned char offset) -{ - PrintFromPROGMEM(dataPtr, offset); - - PrintNewLine(); -} - - -//************************************************************************ -void PrintString(char *textString) -{ -char theChar; -int ii; - - theChar = 1; - ii = 0; - while (theChar != 0) - { - theChar = textString[ii]; - if (theChar != 0) - { - sendchar(theChar); - } - ii++; - } -} - -//************************************************************************ -void PrintHexByte(unsigned char theByte) -{ -char theChar; - - theChar = 0x30 + ((theByte >> 4) & 0x0f); - if (theChar > 0x39) - { - theChar += 7; - } - sendchar(theChar ); - - theChar = 0x30 + (theByte & 0x0f); - if (theChar > 0x39) - { - theChar += 7; - } - sendchar(theChar ); -} - -//************************************************************************ -void PrintDecInt(int theNumber, int digitCnt) -{ -int theChar; -int myNumber; - - myNumber = theNumber; - - if ((myNumber > 100) || (digitCnt >= 3)) - { - theChar = 0x30 + myNumber / 100; - sendchar(theChar ); - } - - if ((myNumber > 10) || (digitCnt >= 2)) - { - theChar = 0x30 + ((myNumber % 100) / 10 ); - sendchar(theChar ); - } - theChar = 0x30 + (myNumber % 10); - sendchar(theChar ); -} - - - - -//************************************************************************ -static void PrintCPUstats(void) -{ -unsigned char fuseByte; - - PrintFromPROGMEMln(gTextMsg_Explorer, 0); - - PrintFromPROGMEM(gTextMsg_COMPILED_ON, 0); - PrintFromPROGMEMln(gTextMsg_GCC_DATE_STR, 0); - - PrintFromPROGMEM(gTextMsg_CPU_Type, 0); - PrintFromPROGMEMln(gTextMsg_CPU_Name, 0); - - PrintFromPROGMEM(gTextMsg_AVR_ARCH, 0); - PrintDecInt(__AVR_ARCH__, 1); - PrintNewLine(); - - PrintFromPROGMEM(gTextMsg_GCC_VERSION, 0); - PrintFromPROGMEMln(gTextMsg_GCC_VERSION_STR, 0); - - //* these can be found in avr/version.h - PrintFromPROGMEM(gTextMsg_AVR_LIBC, 0); - PrintFromPROGMEMln(gTextMsg_AVR_LIBC_VER_STR, 0); - -#if defined(SIGNATURE_0) - PrintFromPROGMEM(gTextMsg_CPU_SIGNATURE, 0); - //* these can be found in avr/iomxxx.h - PrintHexByte(SIGNATURE_0); - PrintHexByte(SIGNATURE_1); - PrintHexByte(SIGNATURE_2); - PrintNewLine(); -#endif - - -#if defined(GET_LOW_FUSE_BITS) - //* fuse settings - PrintFromPROGMEM(gTextMsg_FUSE_BYTE_LOW, 0); - fuseByte = boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS); - PrintHexByte(fuseByte); - PrintNewLine(); - - PrintFromPROGMEM(gTextMsg_FUSE_BYTE_HIGH, 0); - fuseByte = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); - PrintHexByte(fuseByte); - PrintNewLine(); - - PrintFromPROGMEM(gTextMsg_FUSE_BYTE_EXT, 0); - fuseByte = boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS); - PrintHexByte(fuseByte); - PrintNewLine(); - - PrintFromPROGMEM(gTextMsg_FUSE_BYTE_LOCK, 0); - fuseByte = boot_lock_fuse_bits_get(GET_LOCK_BITS); - PrintHexByte(fuseByte); - PrintNewLine(); - -#endif - -} - - -//************************************************************************ -static void BlinkLED(void) -{ - PROGLED_DDR |= (1< 0) - { - if (myAddressPointer > 0x10000) - { - PrintHexByte((myAddressPointer >> 16) & 0x00ff); - } - PrintHexByte((myAddressPointer >> 8) & 0x00ff); - PrintHexByte(myAddressPointer & 0x00ff); - sendchar(0x20); - sendchar('-'); - sendchar(0x20); - - asciiDump[0] = 0; - for (ii=0; ii<16; ii++) - { - switch(dumpWhat) - { - case kDUMP_FLASH: - #if (FLASHEND > 0x10000) - theValue = pgm_read_byte_far(myAddressPointer); - #else - theValue = pgm_read_byte_near(myAddressPointer); - #endif - break; - - case kDUMP_EEPROM: - theValue = eeprom_read_byte((uint8_t *)(uint16_t)myAddressPointer); - break; - - case kDUMP_RAM: - theValue = ramPtr[myAddressPointer]; - break; - - } - PrintHexByte(theValue); - sendchar(0x20); - if ((theValue >= 0x20) && (theValue < 0x7f)) - { - asciiDump[ii % 16] = theValue; - } - else - { - asciiDump[ii % 16] = '.'; - } - - myAddressPointer++; - } - asciiDump[16] = 0; - PrintString(asciiDump); - PrintNewLine(); - - numRows--; - } -} - - - -//************************************************************************ -//* returns amount of extended memory -static void EEPROMtest(void) -{ -int ii; -char theChar; -char theEEPROMchar; -int errorCount; - - PrintFromPROGMEMln(gTextMsg_WriteToEEprom, 0); - PrintNewLine(); - ii = 0; -#if (FLASHEND > 0x10000) - while (((theChar = pgm_read_byte_far(((uint16_t)gTextMsg_Explorer) + ii)) != '*') && (ii < 512)) -#else - while (((theChar = pgm_read_byte_near(((uint16_t)gTextMsg_Explorer) + ii)) != '*') && (ii < 512)) -#endif - { - eeprom_write_byte((uint8_t *)ii, theChar); - if (theChar == 0) - { - PrintFromPROGMEM(gTextMsg_SPACE, 0); - } - else - { - sendchar(theChar); - } - ii++; - } - - //* no go back through and test - PrintNewLine(); - PrintNewLine(); - PrintFromPROGMEMln(gTextMsg_ReadingEEprom, 0); - PrintNewLine(); - errorCount = 0; - ii = 0; -#if (FLASHEND > 0x10000) - while (((theChar = pgm_read_byte_far((uint16_t)gTextMsg_Explorer + ii)) != '*') && (ii < 512)) -#else - while (((theChar = pgm_read_byte_near((uint16_t)gTextMsg_Explorer + ii)) != '*') && (ii < 512)) -#endif - { - theEEPROMchar = eeprom_read_byte((uint8_t *)ii); - if (theEEPROMchar == 0) - { - PrintFromPROGMEM(gTextMsg_SPACE, 0); - } - else - { - sendchar(theEEPROMchar); - } - if (theEEPROMchar != theChar) - { - errorCount++; - } - ii++; - } - PrintNewLine(); - PrintNewLine(); - PrintFromPROGMEM(gTextMsg_EEPROMerrorCnt, 0); - PrintDecInt(errorCount, 1); - PrintNewLine(); - PrintNewLine(); - - gEepromIndex = 0; //* set index back to zero for next eeprom dump - -} - - - -#if (FLASHEND > 0x08000) -//* this includes the interrupt names for the monitor portion. There is no longer enough -//* memory to include this -// #include "avrinterruptnames.h" -// #ifndef _INTERRUPT_NAMES_DEFINED_ -// #warning Interrupt vectors not defined -// #endif -#endif - -//************************************************************************ -static void VectorDisplay(void) -{ -unsigned long byte1; -unsigned long byte2; -unsigned long byte3; -unsigned long byte4; -unsigned long word1; -unsigned long word2; -int vectorIndex; -unsigned long myMemoryPtr; -unsigned long wordMemoryAddress; -unsigned long realitiveAddr; -unsigned long myFullAddress; -unsigned long absoluteAddr; -#if defined(_INTERRUPT_NAMES_DEFINED_) - long stringPointer; -#endif - - myMemoryPtr = 0; - vectorIndex = 0; - PrintFromPROGMEMln(gTextMsg_CPU_Name, 0); - PrintFromPROGMEMln(gTextMsg_VECTOR_HEADER, 0); - // V# ADDR op code - // 1 - 0000 = C3 BB 00 00 rjmp 03BB >000776 RESET - while (vectorIndex < kInterruptVectorCount) - { - wordMemoryAddress = myMemoryPtr / 2; - // 01 - 0000 = 12 34 - PrintDecInt(vectorIndex + 1, 2); - sendchar(0x20); - sendchar('-'); - sendchar(0x20); - PrintHexByte((wordMemoryAddress >> 8) & 0x00ff); - PrintHexByte((wordMemoryAddress) & 0x00ff); - sendchar(0x20); - sendchar('='); - sendchar(0x20); - - - //* the AVR is LITTLE ENDIAN, swap the byte order - #if (FLASHEND > 0x10000) - byte1 = pgm_read_byte_far(myMemoryPtr++); - byte2 = pgm_read_byte_far(myMemoryPtr++); - byte3 = pgm_read_byte_far(myMemoryPtr++); - byte4 = pgm_read_byte_far(myMemoryPtr++); - #else - byte1 = pgm_read_byte_near(myMemoryPtr++); - byte2 = pgm_read_byte_near(myMemoryPtr++); - byte3 = pgm_read_byte_near(myMemoryPtr++); - byte4 = pgm_read_byte_near(myMemoryPtr++); - #endif - word1 = (byte2 << 8) + byte1; - word2 = (byte4 << 8) + byte3; - - - PrintHexByte(byte2); - sendchar(0x20); - PrintHexByte(byte1); - sendchar(0x20); - PrintHexByte(byte4); - sendchar(0x20); - PrintHexByte(byte3); - sendchar(0x20); - - if (word1 == 0xffff) - { - PrintFromPROGMEM(gTextMsg_noVector, 0); - } - else if ((word1 & 0xc000) == 0xc000) - { - //* rjmp instruction - realitiveAddr = word1 & 0x3FFF; - absoluteAddr = wordMemoryAddress + realitiveAddr; //* add the offset to the current address - absoluteAddr = absoluteAddr << 1; //* multiply by 2 for byte address - - PrintFromPROGMEM(gTextMsg_rjmp, 0); - PrintHexByte((realitiveAddr >> 8) & 0x00ff); - PrintHexByte((realitiveAddr) & 0x00ff); - sendchar(0x20); - sendchar('>'); - PrintHexByte((absoluteAddr >> 16) & 0x00ff); - PrintHexByte((absoluteAddr >> 8) & 0x00ff); - PrintHexByte((absoluteAddr) & 0x00ff); - - } - else if ((word1 & 0xfE0E) == 0x940c) - { - //* jmp instruction, this is REALLY complicated, refer to the instruction manual (JMP) - myFullAddress = ((byte1 & 0x01) << 16) + - ((byte1 & 0xf0) << 17) + - ((byte2 & 0x01) << 21) + - word2; - - absoluteAddr = myFullAddress << 1; - - PrintFromPROGMEM(gTextMsg_jmp, 0); - PrintHexByte((myFullAddress >> 16) & 0x00ff); - PrintHexByte((myFullAddress >> 8) & 0x00ff); - PrintHexByte((myFullAddress) & 0x00ff); - sendchar(0x20); - sendchar('>'); - PrintHexByte((absoluteAddr >> 16) & 0x00ff); - PrintHexByte((absoluteAddr >> 8) & 0x00ff); - PrintHexByte((absoluteAddr) & 0x00ff); - } - - #if defined(_INTERRUPT_NAMES_DEFINED_) - sendchar(0x20); - #if (FLASHEND > 0x10000) - stringPointer = pgm_read_word_far(&(gInterruptNameTable[vectorIndex])); - #else - stringPointer = pgm_read_word_near(&(gInterruptNameTable[vectorIndex])); - #endif - PrintFromPROGMEM((char *)stringPointer, 0); - #endif - PrintNewLine(); - - vectorIndex++; - } -} - -//************************************************************************ -static void PrintAvailablePort(char thePortLetter) -{ - PrintFromPROGMEM(gTextMsg_PORT, 0); - sendchar(thePortLetter); - PrintNewLine(); -} - -//************************************************************************ -static void ListAvailablePorts(void) -{ - -#ifdef DDRA - PrintAvailablePort('A'); -#endif - -#ifdef DDRB - PrintAvailablePort('B'); -#endif - -#ifdef DDRC - PrintAvailablePort('C'); -#endif - -#ifdef DDRD - PrintAvailablePort('D'); -#endif - -#ifdef DDRE - PrintAvailablePort('E'); -#endif - -#ifdef DDRF - PrintAvailablePort('F'); -#endif - -#ifdef DDRG - PrintAvailablePort('G'); -#endif - -#ifdef DDRH - PrintAvailablePort('H'); -#endif - -#ifdef DDRI - PrintAvailablePort('I'); -#endif - -#ifdef DDRJ - PrintAvailablePort('J'); -#endif - -#ifdef DDRK - PrintAvailablePort('K'); -#endif - -#ifdef DDRL - PrintAvailablePort('L'); -#endif - -} - -//************************************************************************ -static void AVR_PortOutput(void) -{ -char portLetter; -char getCharFlag; - - PrintFromPROGMEM(gTextMsg_WHAT_PORT, 0); - - portLetter = recchar(); - portLetter = portLetter & 0x5f; - sendchar(portLetter); - PrintNewLine(); - - if ((portLetter >= 'A') && (portLetter <= 'Z')) - { - getCharFlag = true; - switch(portLetter) - { - #ifdef DDRA - case 'A': - DDRA = 0xff; - while (!Serial_Available()) - { - PORTA ^= 0xff; - delay_ms(200); - } - PORTA = 0; - break; - #endif - - #ifdef DDRB - case 'B': - DDRB = 0xff; - while (!Serial_Available()) - { - PORTB ^= 0xff; - delay_ms(200); - } - PORTB = 0; - break; - #endif - - #ifdef DDRC - case 'C': - DDRC = 0xff; - while (!Serial_Available()) - { - PORTC ^= 0xff; - delay_ms(200); - } - PORTC = 0; - break; - #endif - - #ifdef DDRD - case 'D': - DDRD = 0xff; - while (!Serial_Available()) - { - PORTD ^= 0xff; - delay_ms(200); - } - PORTD = 0; - break; - #endif - - #ifdef DDRE - case 'E': - DDRE = 0xff; - while (!Serial_Available()) - { - PORTE ^= 0xff; - delay_ms(200); - } - PORTE = 0; - break; - #endif - - #ifdef DDRF - case 'F': - DDRF = 0xff; - while (!Serial_Available()) - { - PORTF ^= 0xff; - delay_ms(200); - } - PORTF = 0; - break; - #endif - - #ifdef DDRG - case 'G': - DDRG = 0xff; - while (!Serial_Available()) - { - PORTG ^= 0xff; - delay_ms(200); - } - PORTG = 0; - break; - #endif - - #ifdef DDRH - case 'H': - DDRH = 0xff; - while (!Serial_Available()) - { - PORTH ^= 0xff; - delay_ms(200); - } - PORTH = 0; - break; - #endif - - #ifdef DDRI - case 'I': - DDRI = 0xff; - while (!Serial_Available()) - { - PORTI ^= 0xff; - delay_ms(200); - } - PORTI = 0; - break; - #endif - - #ifdef DDRJ - case 'J': - DDRJ = 0xff; - while (!Serial_Available()) - { - PORTJ ^= 0xff; - delay_ms(200); - } - PORTJ = 0; - break; - #endif - - #ifdef DDRK - case 'K': - DDRK = 0xff; - while (!Serial_Available()) - { - PORTK ^= 0xff; - delay_ms(200); - } - PORTK = 0; - break; - #endif - - #ifdef DDRL - case 'L': - DDRL = 0xff; - while (!Serial_Available()) - { - PORTL ^= 0xff; - delay_ms(200); - } - PORTL = 0; - break; - #endif - - default: - PrintFromPROGMEMln(gTextMsg_PortNotSupported, 0); - getCharFlag = false; - break; - } - if (getCharFlag) - { - recchar(); - } - } - else - { - PrintFromPROGMEMln(gTextMsg_MustBeLetter, 0); - } -} - - -//******************************************************************* -static void PrintHelp(void) -{ - PrintFromPROGMEMln(gTextMsg_HELP_MSG_0, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_QM, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_AT, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_B, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_E, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_F, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_H, 0); - - PrintFromPROGMEMln(gTextMsg_HELP_MSG_L, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_Q, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_R, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_V, 0); - PrintFromPROGMEMln(gTextMsg_HELP_MSG_Y, 0); -} - -//************************************************************************ -static void RunMonitor(void) -{ -char keepGoing; -unsigned char theChar; -int ii, jj; - - for (ii=0; ii<5; ii++) - { - for (jj=0; jj<25; jj++) - { - sendchar('!'); - } - PrintNewLine(); - } - - gRamIndex = 0; - gFlashIndex = 0; - gEepromIndex = 0; - - PrintFromPROGMEMln(gTextMsg_Explorer, 0); - - keepGoing = 1; - while (keepGoing) - { - PrintFromPROGMEM(gTextMsg_Prompt, 0); - theChar = recchar(); - if (theChar >= 0x60) - { - theChar = theChar & 0x5F; - } - - if (theChar >= 0x20) - { - sendchar(theChar); - sendchar(0x20); - } - - switch(theChar) - { - case '0': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_0, 2); - gFlashIndex = 0; - gRamIndex = 0; - gEepromIndex = 0; - break; - - case '?': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_QM, 2); - PrintCPUstats(); - break; - - case '@': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_AT, 2); - EEPROMtest(); - break; - - case 'B': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_B, 2); - BlinkLED(); - break; - - case 'E': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_E, 2); - DumpHex(kDUMP_EEPROM, gEepromIndex, 16); - gEepromIndex += 256; - if (gEepromIndex > E2END) - { - gEepromIndex = 0; - } - break; - - case 'F': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_F, 2); - DumpHex(kDUMP_FLASH, gFlashIndex, 16); - gFlashIndex += 256; - break; - - case 'H': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_H, 2); - PrintHelp(); - break; - - case 'L': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_L, 2); - ListAvailablePorts(); - break; - - case 'Q': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_Q, 2); - keepGoing = false; - break; - - case 'R': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_R, 2); - DumpHex(kDUMP_RAM, gRamIndex, 16); - gRamIndex += 256; - break; - - case 'V': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_V, 2); - VectorDisplay(); - break; - - case 'Y': - PrintFromPROGMEMln(gTextMsg_HELP_MSG_Y, 2); - AVR_PortOutput(); - break; - - default: - PrintFromPROGMEMln(gTextMsg_HUH, 0); - break; - } - } -} - -#endif - diff --git a/bootloaders/stk500v2/stk500boot.ppg b/bootloaders/stk500v2/stk500boot.ppg deleted file mode 100644 index a8929d70..00000000 --- a/bootloaders/stk500v2/stk500boot.ppg +++ /dev/null @@ -1 +0,0 @@ - \ No newline at end of file diff --git a/bootloaders/stk500v2/stk500boot_v2_mega2560.hex b/bootloaders/stk500v2/stk500boot_v2_mega2560.hex deleted file mode 100644 index 68d2e18b..00000000 --- a/bootloaders/stk500v2/stk500boot_v2_mega2560.hex +++ /dev/null @@ -1,469 +0,0 @@ -:020000023000CC -:10E000000D9489F10D94B2F10D94B2F10D94B2F129 -:10E010000D94B2F10D94B2F10D94B2F10D94B2F1F0 -:10E020000D94B2F10D94B2F10D94B2F10D94B2F1E0 -:10E030000D94B2F10D94B2F10D94B2F10D94B2F1D0 -:10E040000D94B2F10D94B2F10D94B2F10D94B2F1C0 -:10E050000D94B2F10D94B2F10D94B2F10D94B2F1B0 -:10E060000D94B2F10D94B2F10D94B2F10D94B2F1A0 -:10E070000D94B2F10D94B2F10D94B2F10D94B2F190 -:10E080000D94B2F10D94B2F10D94B2F10D94B2F180 -:10E090000D94B2F10D94B2F10D94B2F10D94B2F170 -:10E0A0000D94B2F10D94B2F10D94B2F10D94B2F160 -:10E0B0000D94B2F10D94B2F10D94B2F10D94B2F150 -:10E0C0000D94B2F10D94B2F10D94B2F10D94B2F140 -:10E0D0000D94B2F10D94B2F10D94B2F10D94B2F130 -:10E0E0000D94B2F141546D656761323536300041AF -:10E0F000726475696E6F206578706C6F72657220DE -:10E1000073746B3530305632206279204D4C530099 -:10E11000426F6F746C6F616465723E004875683F52 -:10E1200000436F6D70696C6564206F6E203D200048 -:10E130004350552054797065202020203D20005FF9 -:10E140005F4156525F415243485F5F3D2000415658 -:10E1500052204C696243205665723D20004743437C -:10E160002056657273696F6E203D20004350552024 -:10E1700049442020202020203D20004C6F7720663D -:10E18000757365202020203D20004869676820665F -:10E190007573652020203D200045787420667573D6 -:10E1A00065202020203D20004C6F636B2066757336 -:10E1B000652020203D20004D617220203720323024 -:10E1C000313300312E362E3800342E332E350056A2 -:10E1D00023202020414444522020206F7020636F70 -:10E1E00064652020202020696E73747275637469E1 -:10E1F0006F6E2061646472202020496E74657272B3 -:10E20000757074006E6F20766563746F7200726A49 -:10E210006D702020006A6D70200057686174207056 -:10E220006F72743A00506F7274206E6F7420737541 -:10E2300070706F72746564004D7573742062652030 -:10E2400061206C6574746572002000577269747483 -:10E25000696E672045450052656164696E672045B7 -:10E26000450045452065727220636E743D00504F35 -:10E27000525400303D5A65726F2061646472003FF1 -:10E280003D43505520737461747300403D454550C3 -:10E29000524F4D207465737400423D426C696E6B41 -:10E2A000204C454400453D44756D70204545505215 -:10E2B0004F4D00463D44756D7020464C415348001B -:10E2C000483D48656C70004C3D4C69737420492F83 -:10E2D0004F20506F72747300513D51756974005234 -:10E2E0003D44756D702052414D00563D73686F7707 -:10E2F00020696E7465727275707420566563746FF0 -:10E30000727300593D506F727420626C696E6B00BD -:10E310002A0011241FBECFEFD1E2DEBFCDBF01E046 -:10E320000CBF12E0A0E0B2E0EEE1FDEF03E00BBFB6 -:10E3300002C007900D92A030B107D9F712E0A0E01B -:10E34000B2E001C01D92AE30B107E1F70F9460F367 -:10E350000D948DFE01E20EBF0FEF0DBF11241FBE05 -:10E360000D9460F30D9400F020E030E040ED57E0B4 -:10E3700005C0FA013197F1F72F5F3F4F2817390792 -:10E38000C0F308959C01260F311DC901A0E0B0E043 -:10E390002F5F3F4FABBFFC018791882361F08093D3 -:10E3A000C6008091C00086FFFCCF8091C0008064D1 -:10E3B0008093C000EACF08958DE08093C6008091DD -:10E3C000C00086FFFCCF8091C00080648093C000B5 -:10E3D0008AE08093C6008091C00086FFFCCF8091C8 -:10E3E000C00080648093C00008950F94C2F10F9420 -:10E3F000DCF10895FC019081992359F09093C600B7 -:10E400008091C00086FFFCCF8091C0008064809323 -:10E41000C0003196992379F70895282F982F929567 -:10E420009F70892F805D8A3308F0895F8093C600D2 -:10E430008091C00086FFFCCF8091C00080648093F3 -:10E44000C000822F8F70982F905D9A3308F0995FEB -:10E450009093C6008091C00086FFFCCF8091C000E1 -:10E4600080648093C00008959C01FB01853691056E -:10E470001CF46330710594F0C90164E670E00F94F8 -:10E480002EFE605D7F4F6093C6008091C00086FFC6 -:10E49000FCCF8091C00080648093C0002B30310598 -:10E4A00014F43297B4F0C90164E670E00F942EFEC4 -:10E4B0006AE070E00F942EFE605D7F4F6093C600AF -:10E4C0008091C00086FFFCCF8091C0008064809363 -:10E4D000C000C9016AE070E00F942EFEC0968093E0 -:10E4E000C6008091C00086FFFCCF8091C000806490 -:10E4F0008093C00008951F93182F8EE692EE60E07F -:10E500000F94C2F11093C6008091C00086FFFCCF2B -:10E510008091C00080648093C0000F94DCF11F9153 -:10E5200008952F923F924F925F926F927F928F92B7 -:10E530009F92AF92BF92CF92DF92EF92FF920F9392 -:10E540001F93DF93CF93CDB7DEB762970FB6F894E2 -:10E55000DEBF0FBECDBF382E622ECA01DB015C01CB -:10E560006D01772420E2222E2E010894411C511CBB -:10E570008BC081E0A81680E0B80681E0C80680E084 -:10E58000D80628F0C601AA27BB270F940DF2BB2797 -:10E59000AD2D9C2D8B2D0F940DF28A2D0F940DF225 -:10E5A0002092C6008091C00086FFFCCF8091C00001 -:10E5B00080648093C0009DE29093C6008091C0006B -:10E5C00086FFFCCF8091C00080648093C0002092C1 -:10E5D000C6008091C00086FFFCCF8091C00080649F -:10E5E0008093C00019828601750188249924A1E0D6 -:10E5F0003A1651F03A1620F0B2E03B1661F409C029 -:10E600000BBFF701779007C0C7010F9477FE782EF4 -:10E6100002C0F7017080872D0F940DF22092C60082 -:10E620008091C00086FFFCCF8091C0008064809301 -:10E63000C000872D8052F401EF70F0708F3520F408 -:10E64000E40DF51D708204C0E40DF51D8EE280839B -:10E650000894E11CF11C011D111D0894811C911CE2 -:10E6600090E18916910409F0C2CF80E190E0A0E02A -:10E67000B0E0A80EB91ECA1EDB1E198AC2010F9493 -:10E68000FAF10F94DCF16A94662009F072CF629679 -:10E690000FB6F894DEBF0FBECDBFCF91DF911F91B3 -:10E6A0000F91FF90EF90DF90CF90BF90AF909F9031 -:10E6B0008F907F906F905F904F903F902F90089534 -:10E6C0002F923F924F925F926F927F928F929F9282 -:10E6D000AF92BF92CF92DF92EF92FF920F931F9370 -:10E6E000DF93CF93CDB7DEB7CD53D1400FB6F894BB -:10E6F000DEBF0FBECDBF01E20EBF0FEF0DBF94B75F -:10E70000F894A89514BE80916000886180936000A1 -:10E7100010926000789493FF05C0E0910002F091A0 -:10E7200001021995279A2F9A8091C00082608093E8 -:10E73000C00080E18093C40088E18093C1000000A4 -:10E74000EE24FF24870144E0A42EB12CCC24DD2448 -:10E7500024C0C5010197F1F70894E11CF11C011DCB -:10E76000111D21E2E2162EE4F20620E0020720E06D -:10E77000120718F031E0C32ED12CC801B70127ECE5 -:10E780003BE140E050E00F9441FE611571058105C9 -:10E79000910519F485B1805885B98091C00087FD35 -:10E7A00003C0C114D104A9F2A6014F5F5F4FC25E3E -:10E7B000DE4F59834883CE51D140C25EDE4F8881FF -:10E7C0009981CE51D140019711F00D9410FEC05D9A -:10E7D000DE4F19821882C053D14060E0C15DDE4F28 -:10E7E0001882CF52D14088249924C35DDE4F19820C -:10E7F0001882CD52D140C05EDE4F188219821A8233 -:10E800001B82C052D140CE5CDE4F188219821A8220 -:10E810001B82C253D140EE24FF2487010BBFF701B6 -:10E8200007911691C45CDE4F19830883CC53D14005 -:10E830000D940BFEC25EDE4F28813981CE51D1404E -:10E840002130310509F52091C600C25EDE4F1982E4 -:10E850001882CE51D14022C02F5F3F4F4F4F5F4FA4 -:10E86000213082E138078AE7480780E0580780F0C6 -:10E87000C45CDE4FE881F981CC53D140EF5FFF4F9C -:10E8800019F0EE27FF27099420E030E040E050E047 -:10E890008091C00087FFE0CF2091C600C35DDE4FAE -:10E8A00048815981CD52D1404F5F5F4FC35DDE4FEC -:10E8B00059834883CD52D140213209F063C64A3092 -:10E8C000510508F05FC60894811C911C53E0851621 -:10E8D000910409F059C600E010E018C081E280936D -:10E8E000C6008091C00086FFFCCF8091C00080648C -:10E8F0008093C0002F5F3F4F2931310579F70F9486 -:10E90000DCF10F5F1F4F0530110519F020E030E0FA -:10E91000E5CF10920A0210920B0210920C02109294 -:10E920000D02109206021092070210920802109235 -:10E930000902109202021092030210920402109235 -:10E9400005028FEE90EE60E00F94F5F180E191EE1C -:10E9500060E00F94C2F18091C00087FFFCCF9091DE -:10E96000C600903608F09F759032B8F09093C600BC -:10E970008091C00086FFFCCF8091C00080648093AE -:10E98000C000A0E2A093C6008091C00086FFFCCF2B -:10E990008091C00080648093C000983409F4D7C18E -:10E9A0009934B8F4923409F459C1933458F490333B -:10E9B00019F1903308F4E3C59F33A1F1903409F0C5 -:10E9C000DEC5BDC0953409F470C1963409F0D7C5D1 -:10E9D00098C1923509F42BC2933538F49C3409F46C -:10E9E000F5C1913509F0CBC518C2963509F445C279 -:10E9F000993509F0C4C567C483E792EE62E00F94CD -:10EA0000F5F110920602109207021092080210927D -:10EA1000090210920A0210920B0210920C0210923C -:10EA20000D0213C18FE792EE62E00F94F5F18FEEC5 -:10EA300090EE60E00F94F5F181E291EE60E00F94CA -:10EA4000C2F187EB91EE60E00F94F5F180E391EE77 -:10EA500060E00F94C2F184EE90EE60E00F94F5F167 -:10EA60008FE391EE60E00F94C2F186E090E061E008 -:10EA700070E00F9434F20F94DCF18DE591EE60E0DC -:10EA80000F94C2F189EC91EE60E00F94F5F18EE401 -:10EA900091EE60E00F94C2F183EC91EE60E00F9490 -:10EAA000F5F18CE691EE60E00F94C2F18EE10F94E7 -:10EAB0000DF288E90F940DF281E00F940DF20F949E -:10EAC000DCF18BE791EE60E00F94C2F119E0E0E039 -:10EAD000F0E010935700E4918E2F0F940DF20F94F5 -:10EAE000DCF18AE891EE60E00F94C2F1E3E0F0E03F -:10EAF00010935700E4918E2F0F940DF20F94DCF1D8 -:10EB000089E991EE60E00F94C2F1E2E0F0E0109349 -:10EB10005700E4918E2F0F940DF20F94DCF188EAE8 -:10EB200091EE60E00F94C2F1E1E0F0E01093570045 -:10EB30001491812F0F940DF20F94DCF107CF8BE825 -:10EB400092EE62E00F94F5F18BE492EE60E00F94A8 -:10EB5000F5F10F94DCF100E010E019C0C8016F2D51 -:10EB60000F947FFEFF2031F489E492EE60E00F9471 -:10EB7000C2F10BC0F092C6008091C00086FFFCCFAE -:10EB80008091C00080648093C0000F5F1F4FC80158 -:10EB900081519F41A0E0B0E0ABBFFC01F790BAE229 -:10EBA000FB1621F0E2E000301E07C1F60F94DCF105 -:10EBB0000F94DCF187E592EE60E00F94F5F10F948D -:10EBC000DCF1CC24DD2400E010E01EC0C8010F946D -:10EBD00077FEF82E882331F489E492EE60E00F94FA -:10EBE000C2F10BC08093C6008091C00086FFFCCFAD -:10EBF0008091C00080648093C000FE1419F00894D6 -:10EC0000C11CD11C0F5F1F4FC80181519F41A0E063 -:10EC1000B0E0ABBFFC01E790FAE2EF1621F022E092 -:10EC20000030120799F60F94DCF10F94DCF182E6C4 -:10EC300092EE60E00F94C2F1C60161E070E00F94C3 -:10EC400034F20F94DCF10F94DCF110920202109276 -:10EC50000302109204021092050278CE89E992EE26 -:10EC600062E00F94F5F1279A2F9A16C02F9880E052 -:10EC700090E0E0EDF7E03197F1F7019684369105E9 -:10EC8000C1F72F9A80E090E0E0EDF7E03197F1F7DF -:10EC9000019684369105C1F78091C00087FFE6CFC9 -:10ECA0008091C00087FFFCCF64C485EA92EE62E0E9 -:10ECB0000F94F5F140910202509103026091040219 -:10ECC0007091050281E020E10F9491F2809102029F -:10ECD00090910302A0910402B091050280509F4FD1 -:10ECE000AF4FBF4F8093020290930302A0930402A0 -:10ECF000B093050280509041A040B04008F426CE69 -:10ED0000A4CF83EB92EE62E00F94F5F140910602FE -:10ED100050910702609108027091090280E020E1A1 -:10ED20000F9491F28091060290910702A09108023F -:10ED3000B091090280509F4FAF4FBF4F80930602A2 -:10ED400090930702A0930802B0930902FFCD80ECD4 -:10ED500092EE62E00F94F5F183E792EE60E00F949B -:10ED6000F5F18FE792EE60E00F94F5F18BE892EE0B -:10ED700060E00F94F5F189E992EE60E00F94F5F10F -:10ED800085EA92EE60E00F94F5F183EB92EE60E09D -:10ED90000F94F5F180EC92EE60E00F94F5F187ECC2 -:10EDA00092EE60E00F94F5F188ED92EE60E00F9442 -:10EDB000F5F18FED92EE60E00F94F5F18AEE92EEB0 -:10EDC00060E00F94F5F183E093EEBDCD87EC92EE19 -:10EDD00062E00F94F5F181E40F947BF282E40F94EA -:10EDE0007BF283E40F947BF284E40F947BF285E45E -:10EDF0000F947BF286E40F947BF287E40F947BF20E -:10EE000088E40F947BF28AE40F947BF28BE40F94F6 -:10EE10007BF28CE40F947BF299CD88ED92EE62E068 -:10EE20000F94F5F1772473948824992409C48FED05 -:10EE300092EE62E00F94F5F140910A0250910B02BC -:10EE400060910C0270910D0282E020E10F9491F22A -:10EE500080910A0290910B02A0910C02B0910D02D8 -:10EE600080509F4FAF4FBF4F80930A0290930B0289 -:10EE7000A0930C02B0930D0269CD8AEE92EE62E08F -:10EE80000F94F5F184EE90EE60E00F94F5F18FECC5 -:10EE900091EE60E00F94F5F1662477244301CC5D98 -:10EEA000DE4F19821882C452D140D401C301B695F5 -:10EEB000A79597958795CA5DDE4F88839983AA8326 -:10EEC000BB83C652D140CC5DDE4FA881B981C4520C -:10EED000D1401196CC5DDE4FB983A883C452D14096 -:10EEE000CD0162E070E00F9434F2B0E2B093C6005E -:10EEF0008091C00086FFFCCF8091C0008064809329 -:10EF0000C000EDE2E093C6008091C00086FFFCCF18 -:10EF10008091C00080648093C000F0E2F093C6004E -:10EF20008091C00086FFFCCF8091C00080648093F8 -:10EF3000C000CA5DDE4FE880F9800A811B81C6529D -:10EF4000D140BB27A12F902F8F2D0F940DF2CA5DBA -:10EF5000DE4F8881C652D1400F940DF2B0E2FB2EF5 -:10EF6000F092C6008091C00086FFFCCF8091C00067 -:10EF700080648093C0000DE30093C6008091C000C0 -:10EF800086FFFCCF8091C00080648093C00010E2B7 -:10EF90001093C6008091C00086FFFCCF8091C00016 -:10EFA00080648093C0008BBEF3012791C65DDE4F65 -:10EFB0002883CA52D140A22EBB24CC24DD2408943D -:10EFC000611C711C811C911C8BBEF3018791282E42 -:10EFD0003324442455240894611C711C811C911C09 -:10EFE0008BBEF3013791C55DDE4F3883CB52D140E4 -:10EFF0000894611C711C811C911C8BBEF30147910C -:10F00000C45DDE4F4883CC52D140ADEFEA2EAFEF66 -:10F01000FA2EAFEF0A2FAFEF1A2F6E0C7F1C801E57 -:10F02000911E142D032DF22CEE24EA0CFB1C0C1D5A -:10F030001D1D0F940DF220E22093C6008091C000A8 -:10F0400086FFFCCF8091C00080648093C000C65DC5 -:10F05000DE4F8881CA52D1400F940DF230E23093D6 -:10F06000C6008091C00086FFFCCF8091C000806404 -:10F070008093C000C45DDE4F8881CC52D1400F9494 -:10F080000DF240E24093C6008091C00086FFFCCFA5 -:10F090008091C00080648093C000C55DDE4F888190 -:10F0A000CB52D1400F940DF250E25093C6008091A4 -:10F0B000C00086FFFCCF8091C00080648093C000B8 -:10F0C0008FEFE8168FEFF80680E0080780E018075A -:10F0D00031F484E092EE60E00F94C2F1DFC0D80119 -:10F0E000C7018070907CA070B0708050904CA040A0 -:10F0F000B040D1F52FEF3FE340E050E0E222F322B1 -:10F1000004231523CA5DDE4FA880B980CA80DB8046 -:10F11000C652D140AE0CBF1CC01ED11EAA0CBB1CD7 -:10F12000CC1CDD1C8EE092EE60E00F94C2F1BB2798 -:10F13000A12F902F8F2D0F940DF28E2D0F940DF285 -:10F1400030E23093C6008091C00086FFFCCF8091F2 -:10F15000C00080648093C0004EE34093C60080915D -:10F16000C00086FFFCCF87C08EE09EEFA0E0B0E03D -:10F17000E822F9220A231B239CE0E91694E9F90608 -:10F1800090E0090790E0190709F088C0C45DDE4FE0 -:10F19000A881CC52D140EA2EFF2400E010E0102FCD -:10F1A0000F2DFE2CEE24C55DDE4FB881CB52D14031 -:10F1B000EB0EF11C011D111DD601C501817090706F -:10F1C000A070B070DC0199278827E80EF91E0A1F8D -:10F1D0001B1F20EF30E040E050E0A222B322C42207 -:10F1E000D52241E1AA0CBB1CCC1CDD1C4A95D1F7F1 -:10F1F000EA0CFB1C0C1D1D1D81E090E0A0E0B0E0BE -:10F20000282239224A225B2235E1220C331C441C7D -:10F21000551C3A95D1F7E20CF31C041D151D57013E -:10F220006801AA0CBB1CCC1CDD1C85E192EE60E0E1 -:10F230000F94C2F1C801AA27BB270F940DF2BB2778 -:10F24000A12F902F8F2D0F940DF28E2D0F940DF274 -:10F2500090E29093C6008091C00086FFFCCF809121 -:10F26000C00080648093C000AEE3A093C60080918C -:10F27000C00086FFFCCF8091C00080648093C000F6 -:10F28000C601AA27BB270F940DF2BB27AD2D9C2DDD -:10F290008B2D0F940DF28A2D0F940DF20F94DCF14B -:10F2A000CC5DDE4FE881F981C452D140F99709F471 -:10F2B0004DCBF4E0EF2EF12C012D112D6E0C7F1CA7 -:10F2C000801E911EF2CD83E093EE62E00F94F5F183 -:10F2D0008AE192EE60E00F94C2F18091C00087FF56 -:10F2E000FCCF1091C6001F751093C6008091C0001E -:10F2F00086FFFCCF8091C00080648093C0000F9493 -:10F30000DCF1812F81548A3108F036C1163409F4BA -:10F3100095C0173490F4133409F44EC0143430F40B -:10F320001134F1F0123409F01DC130C0143409F465 -:10F3300059C0153409F016C16BC01A3409F4C4C0A1 -:10F340001B3438F4173409F48FC0183409F00AC19B -:10F35000A1C01B3409F4D2C01C3409F003C1E8C0B9 -:10F360008FEF81B90DC082B1809582B980E090E0C5 -:10F37000E0EDF7E03197F1F70196883C9105C1F790 -:10F380008091C00087FFEFCF12B8EFC08FEF84B934 -:10F390000DC085B1809585B980E090E0E0EDF7E0A3 -:10F3A0003197F1F70196883C9105C1F78091C00033 -:10F3B00087FFEFCF15B8D9C08FEF87B90DC088B1DF -:10F3C000809588B980E090E0E0EDF7E03197F1F7C3 -:10F3D0000196883C9105C1F78091C00087FFEFCF6F -:10F3E00018B8C3C08FEF8AB90DC08BB180958BB9A7 -:10F3F00080E090E0E0EDF7E03197F1F70196883C8E -:10F400009105C1F78091C00087FFEFCF1BB8ADC059 -:10F410008FEF8DB90DC08EB180958EB980E090E0F0 -:10F42000E0EDF7E03197F1F70196883C9105C1F7DF -:10F430008091C00087FFEFCF1EB897C08FEF80BBD1 -:10F440000DC081B3809581BB80E090E0E0EDF7E0F6 -:10F450003197F1F70196883C9105C1F78091C00082 -:10F4600087FFEFCF11BA81C08FEF83BB0DC084B38C -:10F47000809584BB80E090E0E0EDF7E03197F1F714 -:10F480000196883C9105C1F78091C00087FFEFCFBE -:10F4900014BA6BC08FEF809301010FC080910201FD -:10F4A00080958093020180E090E0E0EDF7E03197F5 -:10F4B000F1F70196883C9105C1F78091C00087FF64 -:10F4C000EDCF1092020151C08FEF809304010FC065 -:10F4D0008091050180958093050180E090E0E0ED4A -:10F4E000F7E03197F1F70196883C9105C1F78091DB -:10F4F000C00087FFEDCF1092050137C08FEF8093DA -:10F5000007010FC08091080180958093080180E079 -:10F5100090E0E0EDF7E03197F1F70196883C910536 -:10F52000C1F78091C00087FFEDCF109208011DC088 -:10F530008FEF80930A010FC080910B01809580931B -:10F540000B0180E090E0E0EDF7E03197F1F70196F4 -:10F55000883C9105C1F78091C00087FFEDCF1092E4 -:10F560000B0103C085E292EEEEC98091C00087FFD7 -:10F57000FCCF8091C600EAC988E392EEE4C98CE131 -:10F5800091EEE1C988249924933011F1943028F444 -:10F59000913089F09230B8F408C0953061F195301F -:10F5A000F0F0963009F048C043C02B3109F042C951 -:10F5B00091E06BE13FC96227C15DDE4F2883CF52E6 -:10F5C000D14092E037C9B22FA0E0622793E032C960 -:10F5D000822F90E0A82BB92B622794E02BC92E3004 -:10F5E00009F039C3622795E0C05DDE4F19821882A9 -:10F5F000C053D1401FC9E1E0F0E0EC0FFD1FC05D3A -:10F60000DE4F08811981C053D140E00FF11F2083E4 -:10F610000F5F1F4FC05DDE4F19830883C053D14079 -:10F6200062270A171B0709F005C9D80196E002C92D -:10F63000261709F010C303C0973009F0FBC87724E0 -:10F640009981933109F412C19431C8F4963009F4C8 -:10F65000D8C0973050F4923009F406C1933009F4C1 -:10F660006DC0913009F059C253C0913109F477C08F -:10F67000923108F0BBC0903109F04FC2F5C098310B -:10F6800009F487C0993150F4953109F4EFC09531F0 -:10F6900008F4C6C1963109F040C2C2C19A3109F4DA -:10F6A0006CC09A3108F491C09B3109F45BC09D3164 -:10F6B00009F033C29D81903359F48F81882311F46E -:10F6C0009EE11CC0813011F091E018C098E916C08D -:10F6D000892F807591F0903539F4E0E0F0E089E011 -:10F6E0008093570094910AC0983539F4E3E0F0E034 -:10F6F00089E080935700949101C090E01A821B82A8 -:10F700008D818C831D829E831F8227E030E009C299 -:10F710001A8288E08B8381E48C8386E58D8382E581 -:10F720008E8389E48F8383E5888780E589878FE5E9 -:10F730008A8782E38B872BE030E0F3C18A818139AD -:10F7400041F0823941F0803911F48FE005C080E04A -:10F7500003C082E001C08AE01A828B8344C0772410 -:10F76000739482C08D81882311F48EE12CC0813086 -:10F7700011F081E028C088E926C01A82E1E0F0E0BB -:10F7800089E08093570084918B831C8224E030E0D1 -:10F79000C8C18B81803589F48C81883039F4E2E0EE -:10F7A000F0E089E08093570084910DC0E0E0F0E044 -:10F7B00089E080935700849106C0E3E0F0E089E09F -:10F7C0008093570084911A82DFCF8D81836C99E0FA -:10F7D000E1E0F0E0082E90935700E89507B600FCB2 -:10F7E000FDCF1A821B8223E030E09BC180EC8A832C -:10F7F000CE5CDE4F188219821A821B82C253D1401E -:10F800008EC18A8190E0A0E0B0E0582F44273327D2 -:10F8100022278B8190E0A0E0B0E0DC0199278827C7 -:10F82000282B392B4A2B5B2B8D8190E0A0E0B0E098 -:10F83000282B392B4A2B5B2B8C8190E0A0E0B0E089 -:10F84000BA2FA92F982F8827282B392B4A2B5B2BCF -:10F85000220F331F441F551FC05EDE4F288339839C -:10F860004A835B83C052D1401A8259C13A81C95C34 -:10F87000DE4F3883C753D140CA5CDE4F1882C6536F -:10F88000D1408B81C82EDD24CA5CDE4F488159816E -:10F89000C653D140C42AD52A933109F082C0CE5C28 -:10F8A000DE4F88819981AA81BB81C253D1408050AB -:10F8B000904CA340B04030F583E0CE5CDE4FE88052 -:10F8C000F9800A811B81C253D140F70100935B008C -:10F8D00080935700E89507B600FCFDCFCE5CDE4F65 -:10F8E000088119812A813B81C253D14000501F4FAA -:10F8F0002F4F3F4FCE5CDE4F088319832A833B8313 -:10F90000C253D140C05EDE4F488159816A817B81FC -:10F91000C052D140DE011B9631E08C9111962C91A2 -:10F9200011971296C75CDE4F2883C953D140C85C3B -:10F93000DE4F1882C853D14090E0C85CDE4FE881AA -:10F94000F981C853D1408E2B9F2B0C01FA01609393 -:10F950005B0030935700E89511244E5F5F4F6F4F67 -:10F960007F4F0EEFE02E0FEFF02ECE0CDF1CC114F8 -:10F97000D10499F685E0C05EDE4F088119812A81A5 -:10F980003B81C052D140F80120935B008093570027 -:10F99000E89507B600FCFDCF81E180935700E8951C -:10F9A00035C0C05EDE4F88819981AA81BB81C0527B -:10F9B000D140B695A795979587957C018601ABE0D8 -:10F9C000AA2EB12CAC0EBD1E0BC0D5016D915D01F0 -:10F9D000C7010F947FFE0894E11CF11C01501040F8 -:10F9E0000115110591F7A60160E070E0440F551F65 -:10F9F000661F771FC05EDE4FE880F9800A811B8199 -:10FA0000C052D1404E0D5F1D601F711F1A82C05E33 -:10FA1000DE4F488359836A837B83C052D1407FC0C5 -:10FA2000FA80C55CDE4FF882CB53D140C65CDE4F16 -:10FA30001882CA53D1408B81C82EDD24C65CDE4FAC -:10FA400008811981CA53D140C02AD12A1A828981DA -:10FA5000BE016D5F7F4F843121F59601C05EDE4FA0 -:10FA6000E880F9800A811B81C052D1400BBFF701A9 -:10FA700087919691DB018C9311969C936E5F7F4FDB -:10FA8000D801C7010296A11DB11DC05EDE4F88835B -:10FA90009983AA83BB83C052D14022503040F1F6F3 -:10FAA00036C0C05EDE4F288139814A815B81C052F9 -:10FAB000D1400894C108D108760100E010E0089414 -:10FAC000C11CD11C0894E11CF11C011D111DE20E8A -:10FAD000F31E041F151F21BDBB27A52F942F832FB5 -:10FAE00082BD2F5F3F4F4F4F5F4FF89A80B5DB01CC -:10FAF0008D93BD012E153F054007510761F7C05E8C -:10FB0000DE4F288339834A835B83C052D1409601FC -:10FB10002D5F3F4FFB01108204C080EC8A8322E0FE -:10FB200030E08BE18093C6008091C00086FFFCCF5F -:10FB30008091C00080648093C000C15DDE4FF88179 -:10FB4000CF52D140F093C6008091C00086FFFCCF19 -:10FB50008091C00080648093C000432F3093C60022 -:10FB60008091C00086FFFCCF8091C00080648093AC -:10FB7000C000922F2093C6008091C00086FFFCCF6A -:10FB80008091C00080648093C0008EE08093C600A6 -:10FB90008091C00086FFFCCF8091C000806480937C -:10FBA000C00065E1C15DDE4FE880CF52D1406E25D7 -:10FBB00069276427FE01319610C090819093C6009A -:10FBC0008091C00086FFFCCF31968091C000806498 -:10FBD0008093C0006927215030402115310569F715 -:10FBE0006093C6008091C00086FFFCCF8091C0006A -:10FBF00080648093C00085B1805885B9772081F4F6 -:10FC0000C15DDE4F0881CF52D1400F5FC15DDE4F35 -:10FC10000883CF52D14090E0A0E0B0E00D941AF4F8 -:10FC200027982F9880E090E020ED37E0F901319798 -:10FC3000F1F7019684369105C9F700008091C00064 -:10FC40008D7F8093C00081E180935700E895EE2777 -:10FC5000FF270994FFCF90E00D941AF497FB092E2B -:10FC600007260AD077FD04D02ED006D000201AF443 -:10FC7000709561957F4F0895F6F7909581959F4F08 -:10FC80000895A1E21A2EAA1BBB1BFD010DC0AA1FDD -:10FC9000BB1FEE1FFF1FA217B307E407F50720F0F5 -:10FCA000A21BB30BE40BF50B661F771F881F991F70 -:10FCB0001A9469F760957095809590959B01AC01B9 -:10FCC000BD01CF010895AA1BBB1B51E107C0AA1FAC -:10FCD000BB1FA617B70710F0A61BB70B881F991FED -:10FCE0005A95A9F780959095BC01CD010895F99991 -:10FCF000FECF92BD81BDF89A992780B50895262F31 -:10FD0000F999FECF1FBA92BD81BD20BD0FB6F89400 -:0EFD1000FA9AF99A0FBE01960895F894FFCF63 -:040000033000E000E9 -:00000001FF diff --git a/variants/eightanaloginputs/pins_arduino.h b/variants/eightanaloginputs/pins_arduino.h deleted file mode 100644 index 4ccf8ba2..00000000 --- a/variants/eightanaloginputs/pins_arduino.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA -*/ - -#include "../standard/pins_arduino.h" -#undef NUM_ANALOG_INPUTS -#define NUM_ANALOG_INPUTS 8 diff --git a/variants/ethernet/pins_arduino.h b/variants/ethernet/pins_arduino.h deleted file mode 100644 index 77fcc40c..00000000 --- a/variants/ethernet/pins_arduino.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include - -#define NUM_DIGITAL_PINS 20 -#define NUM_ANALOG_INPUTS 6 -#define analogInputToDigitalPin(p) ((p < 6) ? (p) + 14 : -1) - -#if defined(__AVR_ATmega8__) -#define digitalPinHasPWM(p) ((p) == 9 || (p) == 10 || (p) == 11) -#else -#define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11) -#endif - -#define PIN_SPI_SS (10) -#define PIN_SPI_MOSI (11) -#define PIN_SPI_MISO (12) -#define PIN_SPI_SCK (13) - -static const uint8_t SS = PIN_SPI_SS; -static const uint8_t MOSI = PIN_SPI_MOSI; -static const uint8_t MISO = PIN_SPI_MISO; -static const uint8_t SCK = PIN_SPI_SCK; - -#define PIN_WIRE_SDA (18) -#define PIN_WIRE_SCL (19) - -static const uint8_t SDA = PIN_WIRE_SDA; -static const uint8_t SCL = PIN_WIRE_SCL; - -#define LED_BUILTIN 9 - -#define PIN_A0 (14) -#define PIN_A1 (15) -#define PIN_A2 (16) -#define PIN_A3 (17) -#define PIN_A4 (18) -#define PIN_A5 (19) -#define PIN_A6 (20) -#define PIN_A7 (21) - -static const uint8_t A0 = PIN_A0; -static const uint8_t A1 = PIN_A1; -static const uint8_t A2 = PIN_A2; -static const uint8_t A3 = PIN_A3; -static const uint8_t A4 = PIN_A4; -static const uint8_t A5 = PIN_A5; -static const uint8_t A6 = PIN_A6; -static const uint8_t A7 = PIN_A7; - -#define digitalPinToPCICR(p) (((p) >= 0 && (p) <= 21) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) (((p) <= 7) ? 2 : (((p) <= 13) ? 0 : 1)) -#define digitalPinToPCMSK(p) (((p) <= 7) ? (&PCMSK2) : (((p) <= 13) ? (&PCMSK0) : (((p) <= 21) ? (&PCMSK1) : ((uint8_t *)0)))) -#define digitalPinToPCMSKbit(p) (((p) <= 7) ? (p) : (((p) <= 13) ? ((p) - 8) : ((p) - 14))) - -#define digitalPinToInterrupt(p) ((p) == 2 ? 0 : ((p) == 3 ? 1 : NOT_AN_INTERRUPT)) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA8 & 168 / ARDUINO -// -// +-\/-+ -// PC6 1| |28 PC5 (AI 5) -// (D 0) PD0 2| |27 PC4 (AI 4) -// (D 1) PD1 3| |26 PC3 (AI 3) -// (D 2) PD2 4| |25 PC2 (AI 2) -// PWM+ (D 3) PD3 5| |24 PC1 (AI 1) -// (D 4) PD4 6| |23 PC0 (AI 0) -// VCC 7| |22 GND -// GND 8| |21 AREF -// PB6 9| |20 AVCC -// PB7 10| |19 PB5 (D 13) -// PWM+ (D 5) PD5 11| |18 PB4 (D 12) -// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM -// (D 7) PD7 13| |16 PB2 (D 10) PWM -// (D 8) PB0 14| |15 PB1 (D 9) PWM -// +----+ -// -// (PWM+ indicates the additional PWM pins on the ATmega168.) - -// ATMEL ATMEGA1280 / ARDUINO -// -// 0-7 PE0-PE7 works -// 8-13 PB0-PB5 works -// 14-21 PA0-PA7 works -// 22-29 PH0-PH7 works -// 30-35 PG5-PG0 works -// 36-43 PC7-PC0 works -// 44-51 PJ7-PJ0 works -// 52-59 PL7-PL0 works -// 60-67 PD7-PD0 works -// A0-A7 PF0-PF7 -// A8-A15 PK0-PK7 - - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, /* 0 */ - PD, - PD, - PD, - PD, - PD, - PD, - PD, - PB, /* 8 */ - PB, - PB, - PB, - PB, - PB, - PC, /* 14 */ - PC, - PC, - PC, - PC, - PC, -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(0), /* 0, port D */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), - _BV(6), - _BV(7), - _BV(0), /* 8, port B */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), - _BV(0), /* 14, port C */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, /* 0 - port D */ - NOT_ON_TIMER, - NOT_ON_TIMER, - // on the ATmega168, digital pin 3 has hardware pwm -#if defined(__AVR_ATmega8__) - NOT_ON_TIMER, -#else - TIMER2B, -#endif - NOT_ON_TIMER, - // on the ATmega168, digital pins 5 and 6 have hardware pwm -#if defined(__AVR_ATmega8__) - NOT_ON_TIMER, - NOT_ON_TIMER, -#else - TIMER0B, - TIMER0A, -#endif - NOT_ON_TIMER, - NOT_ON_TIMER, /* 8 - port B */ - TIMER1A, - TIMER1B, -#if defined(__AVR_ATmega8__) - TIMER2, -#else - TIMER2A, -#endif - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, /* 14 - port C */ - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -#endif - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_HARDWARE Serial -#define SERIAL_PORT_HARDWARE_OPEN Serial - -#endif diff --git a/variants/gemma/pins_arduino.h b/variants/gemma/pins_arduino.h deleted file mode 100644 index e0ec217a..00000000 --- a/variants/gemma/pins_arduino.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - pins_arduino.c - pin definitions for the Arduino board - Part of Arduino / Wiring Lite - - Copyright (c) 2005 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - Modified 28-08-2009 for attiny84 R.Wiersma - Modified 09-10-2009 for attiny45 A.Saporetti -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include - -// Defines to make D4 support PWM -// See for more info: http://forums.adafruit.com/viewtopic.php?f=52&t=43951 -//#define TCCR1A GTCCR -//#define WGM10 PWM1B - -// ATMEL ATTINY45 / ARDUINO -// -// +-\/-+ -// Ain0 (D 5) PB5 1| |8 Vcc -// Ain3 (D 3) PB3 2| |7 PB2 (D 2) Ain1 -// Ain2 (D 4) PB4 3| |6 PB1 (D 1) pwm1 -// GND 4| |5 PB0 (D 0) pwm0 -// +----+ - -#define NUM_DIGITAL_PINS 3 -#define NUM_ANALOG_INPUTS 1 -#define LED_BUILTIN 1 - -#define PIN_A0 (6) -#define PIN_A1 (7) -#define PIN_A2 (8) -#define PIN_A3 (9) - -static const uint8_t A0 = PIN_A0; -static const uint8_t A1 = PIN_A1; -static const uint8_t A2 = PIN_A2; -static const uint8_t A3 = PIN_A3; - -#define digitalPinToPCICR(p) ( ((p) >= 0 && (p) <= 4) ? (&GIMSK) : ((uint8_t *)0) ) -#define digitalPinToPCICRbit(p) ( PCIE ) -#define digitalPinToPCMSK(p) ( ((p) <= 4) ? (&PCMSK) : ((uint8_t *)0) ) -#define digitalPinToPCMSKbit(p) ( (p) ) - -#define digitalPinToInterrupt(p) ((p) == 2 ? 0 : NOT_AN_INTERRUPT) - -#define analogPinToChannel(p) ( (p) < 6 ? (p) : (p) - 6 ) - -#define TCCR1A GTCCR - -#ifdef ARDUINO_MAIN - -void initVariant() -{ - GTCCR |= (1 << PWM1B); -} - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) tiny45 only port B -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PIN, - NOT_A_PIN, - (uint16_t) &PINB, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PB, /* 0 */ - PB, - PB, - PB, - PB, - PB, // 5 - PB, // A0 - PB, - PB, - PB, // A4 - -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(0), /* 0, port B */ - _BV(1), - _BV(2), - _BV(3), /* 3 port B */ - _BV(4), - _BV(5), - _BV(5), - _BV(2), - _BV(4), - _BV(3), -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - TIMER0A, /* OC0A */ - TIMER0B, - NOT_ON_TIMER, - NOT_ON_TIMER, - TIMER1B, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -#endif - -#endif diff --git a/variants/mega/pins_arduino.h b/variants/mega/pins_arduino.h deleted file mode 100644 index 5115c044..00000000 --- a/variants/mega/pins_arduino.h +++ /dev/null @@ -1,413 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include - -#define NUM_DIGITAL_PINS 70 -#define NUM_ANALOG_INPUTS 16 -#define analogInputToDigitalPin(p) ((p < 16) ? (p) + 54 : -1) -#define digitalPinHasPWM(p) (((p) >= 2 && (p) <= 13) || ((p) >= 44 && (p)<= 46)) - -#define PIN_SPI_SS (53) -#define PIN_SPI_MOSI (51) -#define PIN_SPI_MISO (50) -#define PIN_SPI_SCK (52) - -static const uint8_t SS = PIN_SPI_SS; -static const uint8_t MOSI = PIN_SPI_MOSI; -static const uint8_t MISO = PIN_SPI_MISO; -static const uint8_t SCK = PIN_SPI_SCK; - -#define PIN_WIRE_SDA (20) -#define PIN_WIRE_SCL (21) - -static const uint8_t SDA = PIN_WIRE_SDA; -static const uint8_t SCL = PIN_WIRE_SCL; - -#define LED_BUILTIN 13 - -#define PIN_A0 (54) -#define PIN_A1 (55) -#define PIN_A2 (56) -#define PIN_A3 (57) -#define PIN_A4 (58) -#define PIN_A5 (59) -#define PIN_A6 (60) -#define PIN_A7 (61) -#define PIN_A8 (62) -#define PIN_A9 (63) -#define PIN_A10 (64) -#define PIN_A11 (65) -#define PIN_A12 (66) -#define PIN_A13 (67) -#define PIN_A14 (68) -#define PIN_A15 (69) - -static const uint8_t A0 = PIN_A0; -static const uint8_t A1 = PIN_A1; -static const uint8_t A2 = PIN_A2; -static const uint8_t A3 = PIN_A3; -static const uint8_t A4 = PIN_A4; -static const uint8_t A5 = PIN_A5; -static const uint8_t A6 = PIN_A6; -static const uint8_t A7 = PIN_A7; -static const uint8_t A8 = PIN_A8; -static const uint8_t A9 = PIN_A9; -static const uint8_t A10 = PIN_A10; -static const uint8_t A11 = PIN_A11; -static const uint8_t A12 = PIN_A12; -static const uint8_t A13 = PIN_A13; -static const uint8_t A14 = PIN_A14; -static const uint8_t A15 = PIN_A15; - -// A majority of the pins are NOT PCINTs, SO BE WARNED (i.e. you cannot use them as receive pins) -// Only pins available for RECEIVE (TRANSMIT can be on any pin): -// (I've deliberately left out pin mapping to the Hardware USARTs - seems senseless to me) -// Pins: 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 - -#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 13)) || \ - (((p) >= 50) && ((p) <= 53)) || \ - (((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) ) - -#define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \ - ( (((p) >= 62) && ((p) <= 69)) ? 2 : \ - 0 ) ) - -#define digitalPinToPCMSK(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \ - ( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \ - ((uint8_t *)0) ) ) - -#define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \ - ( ((p) == 50) ? 3 : \ - ( ((p) == 51) ? 2 : \ - ( ((p) == 52) ? 1 : \ - ( ((p) == 53) ? 0 : \ - ( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \ - 0 ) ) ) ) ) ) - -#define digitalPinToInterrupt(p) ((p) == 2 ? 0 : ((p) == 3 ? 1 : ((p) >= 18 && (p) <= 21 ? 23 - (p) : NOT_AN_INTERRUPT))) - -#ifdef ARDUINO_MAIN - -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - (uint16_t) &DDRA, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, - (uint16_t) &DDRE, - (uint16_t) &DDRF, - (uint16_t) &DDRG, - (uint16_t) &DDRH, - NOT_A_PORT, - (uint16_t) &DDRJ, - (uint16_t) &DDRK, - (uint16_t) &DDRL, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - (uint16_t) &PORTA, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, - (uint16_t) &PORTE, - (uint16_t) &PORTF, - (uint16_t) &PORTG, - (uint16_t) &PORTH, - NOT_A_PORT, - (uint16_t) &PORTJ, - (uint16_t) &PORTK, - (uint16_t) &PORTL, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PIN, - (uint16_t) &PINA, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, - (uint16_t) &PINE, - (uint16_t) &PINF, - (uint16_t) &PING, - (uint16_t) &PINH, - NOT_A_PIN, - (uint16_t) &PINJ, - (uint16_t) &PINK, - (uint16_t) &PINL, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - // PORTLIST - // ------------------------------------------- - PE , // PE 0 ** 0 ** USART0_RX - PE , // PE 1 ** 1 ** USART0_TX - PE , // PE 4 ** 2 ** PWM2 - PE , // PE 5 ** 3 ** PWM3 - PG , // PG 5 ** 4 ** PWM4 - PE , // PE 3 ** 5 ** PWM5 - PH , // PH 3 ** 6 ** PWM6 - PH , // PH 4 ** 7 ** PWM7 - PH , // PH 5 ** 8 ** PWM8 - PH , // PH 6 ** 9 ** PWM9 - PB , // PB 4 ** 10 ** PWM10 - PB , // PB 5 ** 11 ** PWM11 - PB , // PB 6 ** 12 ** PWM12 - PB , // PB 7 ** 13 ** PWM13 - PJ , // PJ 1 ** 14 ** USART3_TX - PJ , // PJ 0 ** 15 ** USART3_RX - PH , // PH 1 ** 16 ** USART2_TX - PH , // PH 0 ** 17 ** USART2_RX - PD , // PD 3 ** 18 ** USART1_TX - PD , // PD 2 ** 19 ** USART1_RX - PD , // PD 1 ** 20 ** I2C_SDA - PD , // PD 0 ** 21 ** I2C_SCL - PA , // PA 0 ** 22 ** D22 - PA , // PA 1 ** 23 ** D23 - PA , // PA 2 ** 24 ** D24 - PA , // PA 3 ** 25 ** D25 - PA , // PA 4 ** 26 ** D26 - PA , // PA 5 ** 27 ** D27 - PA , // PA 6 ** 28 ** D28 - PA , // PA 7 ** 29 ** D29 - PC , // PC 7 ** 30 ** D30 - PC , // PC 6 ** 31 ** D31 - PC , // PC 5 ** 32 ** D32 - PC , // PC 4 ** 33 ** D33 - PC , // PC 3 ** 34 ** D34 - PC , // PC 2 ** 35 ** D35 - PC , // PC 1 ** 36 ** D36 - PC , // PC 0 ** 37 ** D37 - PD , // PD 7 ** 38 ** D38 - PG , // PG 2 ** 39 ** D39 - PG , // PG 1 ** 40 ** D40 - PG , // PG 0 ** 41 ** D41 - PL , // PL 7 ** 42 ** D42 - PL , // PL 6 ** 43 ** D43 - PL , // PL 5 ** 44 ** D44 - PL , // PL 4 ** 45 ** D45 - PL , // PL 3 ** 46 ** D46 - PL , // PL 2 ** 47 ** D47 - PL , // PL 1 ** 48 ** D48 - PL , // PL 0 ** 49 ** D49 - PB , // PB 3 ** 50 ** SPI_MISO - PB , // PB 2 ** 51 ** SPI_MOSI - PB , // PB 1 ** 52 ** SPI_SCK - PB , // PB 0 ** 53 ** SPI_SS - PF , // PF 0 ** 54 ** A0 - PF , // PF 1 ** 55 ** A1 - PF , // PF 2 ** 56 ** A2 - PF , // PF 3 ** 57 ** A3 - PF , // PF 4 ** 58 ** A4 - PF , // PF 5 ** 59 ** A5 - PF , // PF 6 ** 60 ** A6 - PF , // PF 7 ** 61 ** A7 - PK , // PK 0 ** 62 ** A8 - PK , // PK 1 ** 63 ** A9 - PK , // PK 2 ** 64 ** A10 - PK , // PK 3 ** 65 ** A11 - PK , // PK 4 ** 66 ** A12 - PK , // PK 5 ** 67 ** A13 - PK , // PK 6 ** 68 ** A14 - PK , // PK 7 ** 69 ** A15 -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - // PIN IN PORT - // ------------------------------------------- - _BV( 0 ) , // PE 0 ** 0 ** USART0_RX - _BV( 1 ) , // PE 1 ** 1 ** USART0_TX - _BV( 4 ) , // PE 4 ** 2 ** PWM2 - _BV( 5 ) , // PE 5 ** 3 ** PWM3 - _BV( 5 ) , // PG 5 ** 4 ** PWM4 - _BV( 3 ) , // PE 3 ** 5 ** PWM5 - _BV( 3 ) , // PH 3 ** 6 ** PWM6 - _BV( 4 ) , // PH 4 ** 7 ** PWM7 - _BV( 5 ) , // PH 5 ** 8 ** PWM8 - _BV( 6 ) , // PH 6 ** 9 ** PWM9 - _BV( 4 ) , // PB 4 ** 10 ** PWM10 - _BV( 5 ) , // PB 5 ** 11 ** PWM11 - _BV( 6 ) , // PB 6 ** 12 ** PWM12 - _BV( 7 ) , // PB 7 ** 13 ** PWM13 - _BV( 1 ) , // PJ 1 ** 14 ** USART3_TX - _BV( 0 ) , // PJ 0 ** 15 ** USART3_RX - _BV( 1 ) , // PH 1 ** 16 ** USART2_TX - _BV( 0 ) , // PH 0 ** 17 ** USART2_RX - _BV( 3 ) , // PD 3 ** 18 ** USART1_TX - _BV( 2 ) , // PD 2 ** 19 ** USART1_RX - _BV( 1 ) , // PD 1 ** 20 ** I2C_SDA - _BV( 0 ) , // PD 0 ** 21 ** I2C_SCL - _BV( 0 ) , // PA 0 ** 22 ** D22 - _BV( 1 ) , // PA 1 ** 23 ** D23 - _BV( 2 ) , // PA 2 ** 24 ** D24 - _BV( 3 ) , // PA 3 ** 25 ** D25 - _BV( 4 ) , // PA 4 ** 26 ** D26 - _BV( 5 ) , // PA 5 ** 27 ** D27 - _BV( 6 ) , // PA 6 ** 28 ** D28 - _BV( 7 ) , // PA 7 ** 29 ** D29 - _BV( 7 ) , // PC 7 ** 30 ** D30 - _BV( 6 ) , // PC 6 ** 31 ** D31 - _BV( 5 ) , // PC 5 ** 32 ** D32 - _BV( 4 ) , // PC 4 ** 33 ** D33 - _BV( 3 ) , // PC 3 ** 34 ** D34 - _BV( 2 ) , // PC 2 ** 35 ** D35 - _BV( 1 ) , // PC 1 ** 36 ** D36 - _BV( 0 ) , // PC 0 ** 37 ** D37 - _BV( 7 ) , // PD 7 ** 38 ** D38 - _BV( 2 ) , // PG 2 ** 39 ** D39 - _BV( 1 ) , // PG 1 ** 40 ** D40 - _BV( 0 ) , // PG 0 ** 41 ** D41 - _BV( 7 ) , // PL 7 ** 42 ** D42 - _BV( 6 ) , // PL 6 ** 43 ** D43 - _BV( 5 ) , // PL 5 ** 44 ** D44 - _BV( 4 ) , // PL 4 ** 45 ** D45 - _BV( 3 ) , // PL 3 ** 46 ** D46 - _BV( 2 ) , // PL 2 ** 47 ** D47 - _BV( 1 ) , // PL 1 ** 48 ** D48 - _BV( 0 ) , // PL 0 ** 49 ** D49 - _BV( 3 ) , // PB 3 ** 50 ** SPI_MISO - _BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI - _BV( 1 ) , // PB 1 ** 52 ** SPI_SCK - _BV( 0 ) , // PB 0 ** 53 ** SPI_SS - _BV( 0 ) , // PF 0 ** 54 ** A0 - _BV( 1 ) , // PF 1 ** 55 ** A1 - _BV( 2 ) , // PF 2 ** 56 ** A2 - _BV( 3 ) , // PF 3 ** 57 ** A3 - _BV( 4 ) , // PF 4 ** 58 ** A4 - _BV( 5 ) , // PF 5 ** 59 ** A5 - _BV( 6 ) , // PF 6 ** 60 ** A6 - _BV( 7 ) , // PF 7 ** 61 ** A7 - _BV( 0 ) , // PK 0 ** 62 ** A8 - _BV( 1 ) , // PK 1 ** 63 ** A9 - _BV( 2 ) , // PK 2 ** 64 ** A10 - _BV( 3 ) , // PK 3 ** 65 ** A11 - _BV( 4 ) , // PK 4 ** 66 ** A12 - _BV( 5 ) , // PK 5 ** 67 ** A13 - _BV( 6 ) , // PK 6 ** 68 ** A14 - _BV( 7 ) , // PK 7 ** 69 ** A15 -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - // TIMERS - // ------------------------------------------- - NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX - NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX - TIMER3B , // PE 4 ** 2 ** PWM2 - TIMER3C , // PE 5 ** 3 ** PWM3 - TIMER0B , // PG 5 ** 4 ** PWM4 - TIMER3A , // PE 3 ** 5 ** PWM5 - TIMER4A , // PH 3 ** 6 ** PWM6 - TIMER4B , // PH 4 ** 7 ** PWM7 - TIMER4C , // PH 5 ** 8 ** PWM8 - TIMER2B , // PH 6 ** 9 ** PWM9 - TIMER2A , // PB 4 ** 10 ** PWM10 - TIMER1A , // PB 5 ** 11 ** PWM11 - TIMER1B , // PB 6 ** 12 ** PWM12 - TIMER0A , // PB 7 ** 13 ** PWM13 - NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX - NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX - NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX - NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX - NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX - NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX - NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA - NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL - NOT_ON_TIMER , // PA 0 ** 22 ** D22 - NOT_ON_TIMER , // PA 1 ** 23 ** D23 - NOT_ON_TIMER , // PA 2 ** 24 ** D24 - NOT_ON_TIMER , // PA 3 ** 25 ** D25 - NOT_ON_TIMER , // PA 4 ** 26 ** D26 - NOT_ON_TIMER , // PA 5 ** 27 ** D27 - NOT_ON_TIMER , // PA 6 ** 28 ** D28 - NOT_ON_TIMER , // PA 7 ** 29 ** D29 - NOT_ON_TIMER , // PC 7 ** 30 ** D30 - NOT_ON_TIMER , // PC 6 ** 31 ** D31 - NOT_ON_TIMER , // PC 5 ** 32 ** D32 - NOT_ON_TIMER , // PC 4 ** 33 ** D33 - NOT_ON_TIMER , // PC 3 ** 34 ** D34 - NOT_ON_TIMER , // PC 2 ** 35 ** D35 - NOT_ON_TIMER , // PC 1 ** 36 ** D36 - NOT_ON_TIMER , // PC 0 ** 37 ** D37 - NOT_ON_TIMER , // PD 7 ** 38 ** D38 - NOT_ON_TIMER , // PG 2 ** 39 ** D39 - NOT_ON_TIMER , // PG 1 ** 40 ** D40 - NOT_ON_TIMER , // PG 0 ** 41 ** D41 - NOT_ON_TIMER , // PL 7 ** 42 ** D42 - NOT_ON_TIMER , // PL 6 ** 43 ** D43 - TIMER5C , // PL 5 ** 44 ** D44 - TIMER5B , // PL 4 ** 45 ** D45 - TIMER5A , // PL 3 ** 46 ** D46 - NOT_ON_TIMER , // PL 2 ** 47 ** D47 - NOT_ON_TIMER , // PL 1 ** 48 ** D48 - NOT_ON_TIMER , // PL 0 ** 49 ** D49 - NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO - NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI - NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK - NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS - NOT_ON_TIMER , // PF 0 ** 54 ** A0 - NOT_ON_TIMER , // PF 1 ** 55 ** A1 - NOT_ON_TIMER , // PF 2 ** 56 ** A2 - NOT_ON_TIMER , // PF 3 ** 57 ** A3 - NOT_ON_TIMER , // PF 4 ** 58 ** A4 - NOT_ON_TIMER , // PF 5 ** 59 ** A5 - NOT_ON_TIMER , // PF 6 ** 60 ** A6 - NOT_ON_TIMER , // PF 7 ** 61 ** A7 - NOT_ON_TIMER , // PK 0 ** 62 ** A8 - NOT_ON_TIMER , // PK 1 ** 63 ** A9 - NOT_ON_TIMER , // PK 2 ** 64 ** A10 - NOT_ON_TIMER , // PK 3 ** 65 ** A11 - NOT_ON_TIMER , // PK 4 ** 66 ** A12 - NOT_ON_TIMER , // PK 5 ** 67 ** A13 - NOT_ON_TIMER , // PK 6 ** 68 ** A14 - NOT_ON_TIMER , // PK 7 ** 69 ** A15 -}; - -#endif - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_HARDWARE Serial -#define SERIAL_PORT_HARDWARE1 Serial1 -#define SERIAL_PORT_HARDWARE2 Serial2 -#define SERIAL_PORT_HARDWARE3 Serial3 -#define SERIAL_PORT_HARDWARE_OPEN Serial1 -#define SERIAL_PORT_HARDWARE_OPEN1 Serial2 -#define SERIAL_PORT_HARDWARE_OPEN2 Serial3 - -#endif diff --git a/variants/standard/pins_arduino.h b/variants/standard/pins_arduino.h deleted file mode 100644 index 2ea01905..00000000 --- a/variants/standard/pins_arduino.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include - -#define NUM_DIGITAL_PINS 20 -#define NUM_ANALOG_INPUTS 6 -#define analogInputToDigitalPin(p) ((p < 6) ? (p) + 14 : -1) - -#if defined(__AVR_ATmega8__) -#define digitalPinHasPWM(p) ((p) == 9 || (p) == 10 || (p) == 11) -#else -#define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11) -#endif - -#define PIN_SPI_SS (10) -#define PIN_SPI_MOSI (11) -#define PIN_SPI_MISO (12) -#define PIN_SPI_SCK (13) - -static const uint8_t SS = PIN_SPI_SS; -static const uint8_t MOSI = PIN_SPI_MOSI; -static const uint8_t MISO = PIN_SPI_MISO; -static const uint8_t SCK = PIN_SPI_SCK; - -#define PIN_WIRE_SDA (18) -#define PIN_WIRE_SCL (19) - -static const uint8_t SDA = PIN_WIRE_SDA; -static const uint8_t SCL = PIN_WIRE_SCL; - -#define LED_BUILTIN 13 - -#define PIN_A0 (14) -#define PIN_A1 (15) -#define PIN_A2 (16) -#define PIN_A3 (17) -#define PIN_A4 (18) -#define PIN_A5 (19) -#define PIN_A6 (20) -#define PIN_A7 (21) - -static const uint8_t A0 = PIN_A0; -static const uint8_t A1 = PIN_A1; -static const uint8_t A2 = PIN_A2; -static const uint8_t A3 = PIN_A3; -static const uint8_t A4 = PIN_A4; -static const uint8_t A5 = PIN_A5; -static const uint8_t A6 = PIN_A6; -static const uint8_t A7 = PIN_A7; - -#define digitalPinToPCICR(p) (((p) >= 0 && (p) <= 21) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) (((p) <= 7) ? 2 : (((p) <= 13) ? 0 : 1)) -#define digitalPinToPCMSK(p) (((p) <= 7) ? (&PCMSK2) : (((p) <= 13) ? (&PCMSK0) : (((p) <= 21) ? (&PCMSK1) : ((uint8_t *)0)))) -#define digitalPinToPCMSKbit(p) (((p) <= 7) ? (p) : (((p) <= 13) ? ((p) - 8) : ((p) - 14))) - -#define digitalPinToInterrupt(p) ((p) == 2 ? 0 : ((p) == 3 ? 1 : NOT_AN_INTERRUPT)) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA8 & 168 / ARDUINO -// -// +-\/-+ -// PC6 1| |28 PC5 (AI 5) -// (D 0) PD0 2| |27 PC4 (AI 4) -// (D 1) PD1 3| |26 PC3 (AI 3) -// (D 2) PD2 4| |25 PC2 (AI 2) -// PWM+ (D 3) PD3 5| |24 PC1 (AI 1) -// (D 4) PD4 6| |23 PC0 (AI 0) -// VCC 7| |22 GND -// GND 8| |21 AREF -// PB6 9| |20 AVCC -// PB7 10| |19 PB5 (D 13) -// PWM+ (D 5) PD5 11| |18 PB4 (D 12) -// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM -// (D 7) PD7 13| |16 PB2 (D 10) PWM -// (D 8) PB0 14| |15 PB1 (D 9) PWM -// +----+ -// -// (PWM+ indicates the additional PWM pins on the ATmega168.) - -// ATMEL ATMEGA1280 / ARDUINO -// -// 0-7 PE0-PE7 works -// 8-13 PB0-PB5 works -// 14-21 PA0-PA7 works -// 22-29 PH0-PH7 works -// 30-35 PG5-PG0 works -// 36-43 PC7-PC0 works -// 44-51 PJ7-PJ0 works -// 52-59 PL7-PL0 works -// 60-67 PD7-PD0 works -// A0-A7 PF0-PF7 -// A8-A15 PK0-PK7 - - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, /* 0 */ - PD, - PD, - PD, - PD, - PD, - PD, - PD, - PB, /* 8 */ - PB, - PB, - PB, - PB, - PB, - PC, /* 14 */ - PC, - PC, - PC, - PC, - PC, -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(0), /* 0, port D */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), - _BV(6), - _BV(7), - _BV(0), /* 8, port B */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), - _BV(0), /* 14, port C */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, /* 0 - port D */ - NOT_ON_TIMER, - NOT_ON_TIMER, - // on the ATmega168, digital pin 3 has hardware pwm -#if defined(__AVR_ATmega8__) - NOT_ON_TIMER, -#else - TIMER2B, -#endif - NOT_ON_TIMER, - // on the ATmega168, digital pins 5 and 6 have hardware pwm -#if defined(__AVR_ATmega8__) - NOT_ON_TIMER, - NOT_ON_TIMER, -#else - TIMER0B, - TIMER0A, -#endif - NOT_ON_TIMER, - NOT_ON_TIMER, /* 8 - port B */ - TIMER1A, - TIMER1B, -#if defined(__AVR_ATmega8__) - TIMER2, -#else - TIMER2A, -#endif - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, /* 14 - port C */ - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -#endif - -// These serial port names are intended to allow libraries and architecture-neutral -// sketches to automatically default to the correct port name for a particular type -// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, -// the first hardware serial port whose RX/TX pins are not dedicated to another use. -// -// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor -// -// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial -// -// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library -// -// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. -// -// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX -// pins are NOT connected to anything by default. -#define SERIAL_PORT_MONITOR Serial -#define SERIAL_PORT_HARDWARE Serial - -#endif