Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

2262 lines (1888 sloc) 79.433 kb
from __future__ import division, print_function
"""
A wxPython backend for matplotlib, based (very heavily) on
backend_template.py and backend_gtk.py
Author: Jeremy O'Donoghue (jeremy@o-donoghue.com)
Derived from original copyright work by John Hunter
(jdhunter@ace.bsd.uchicago.edu)
Copyright (C) Jeremy O'Donoghue & John Hunter, 2003-4
License: This work is licensed under a PSF compatible license. A copy
should be included with this source code.
"""
import sys
import os
import os.path
import math
import StringIO
import weakref
import warnings
import numpy as np
# Debugging settings here...
# Debug level set here. If the debug level is less than 5, information
# messages (progressively more info for lower value) are printed. In addition,
# traceback is performed, and pdb activated, for all uncaught exceptions in
# this case
_DEBUG = 5
if _DEBUG < 5:
import traceback, pdb
_DEBUG_lvls = {1 : 'Low ', 2 : 'Med ', 3 : 'High', 4 : 'Error' }
if sys.version_info[0] >= 3:
warnings.warn(
"The wx and wxagg backends have not been tested with Python 3.x",
ImportWarning)
missingwx = "Matplotlib backend_wx and backend_wxagg require wxPython >=2.8"
missingwxversion = ("Matplotlib backend_wx and backend_wxagg "
"require wxversion, which was not found.")
if not hasattr(sys, 'frozen'): # i.e., not py2exe
try:
import wxversion
except ImportError:
raise ImportError(missingwxversion)
# Some early versions of wxversion lack AlreadyImportedError.
# It was added around 2.8.4?
try:
_wx_ensure_failed = wxversion.AlreadyImportedError
except AttributeError:
_wx_ensure_failed = wxversion.VersionError
try:
wxversion.ensureMinimal('2.8')
except _wx_ensure_failed:
pass
# We don't really want to pass in case of VersionError, but when
# AlreadyImportedError is not available, we have to.
try:
import wx
backend_version = wx.VERSION_STRING
except ImportError:
raise ImportError(missingwx)
# Extra version check in case wxversion lacks AlreadyImportedError;
# then VersionError might have been raised and ignored when
# there really *is* a problem with the version.
major, minor = [int(n) for n in backend_version.split('.')[:2]]
if major < 2 or (major < 3 and minor < 8):
print(" wxPython version %s was imported." % backend_version)
raise ImportError(missingwx)
#!!! this is the call that is causing the exception swallowing !!!
#wx.InitAllImageHandlers()
def DEBUG_MSG(string, lvl=3, o=None):
if lvl >= _DEBUG:
cls = o.__class__
# Jeremy, often times the commented line won't print but the
# one below does. I think WX is redefining stderr, damned
# beast
#print >>sys.stderr, "%s- %s in %s" % (_DEBUG_lvls[lvl], string, cls)
print("%s- %s in %s" % (_DEBUG_lvls[lvl], string, cls))
def debug_on_error(type, value, tb):
"""Code due to Thomas Heller - published in Python Cookbook (O'Reilley)"""
traceback.print_exc(type, value, tb)
print()
pdb.pm() # jdh uncomment
class fake_stderr:
"""Wx does strange things with stderr, as it makes the assumption that there
is probably no console. This redirects stderr to the console, since we know
that there is one!"""
def write(self, msg):
print("Stderr: %s\n\r" % msg)
#if _DEBUG < 5:
# sys.excepthook = debug_on_error
# WxLogger =wx.LogStderr()
# sys.stderr = fake_stderr
# Event binding code changed after version 2.5
if wx.VERSION_STRING >= '2.5':
def bind(actor,event,action,**kw):
actor.Bind(event,action,**kw)
else:
def bind(actor,event,action,id=None):
if id is not None:
event(actor, id, action)
else:
event(actor,action)
import matplotlib
from matplotlib import verbose
from matplotlib.backend_bases import RendererBase, GraphicsContextBase,\
FigureCanvasBase, FigureManagerBase, NavigationToolbar2, \
cursors, TimerBase
from matplotlib.backend_bases import ShowBase
from matplotlib._pylab_helpers import Gcf
from matplotlib.artist import Artist
from matplotlib.cbook import exception_to_str, is_string_like, is_writable_file_like
from matplotlib.figure import Figure
from matplotlib.path import Path
from matplotlib.text import _process_text_args, Text
from matplotlib.transforms import Affine2D
from matplotlib.widgets import SubplotTool
from matplotlib import rcParams
# the True dots per inch on the screen; should be display dependent
# see http://groups.google.com/groups?q=screen+dpi+x11&hl=en&lr=&ie=UTF-8&oe=UTF-8&safe=off&selm=7077.26e81ad5%40swift.cs.tcd.ie&rnum=5 for some info about screen dpi
PIXELS_PER_INCH = 75
# Delay time for idle checks
IDLE_DELAY = 5
def error_msg_wx(msg, parent=None):
"""
Signal an error condition -- in a GUI, popup a error dialog
"""
dialog =wx.MessageDialog(parent = parent,
message = msg,
caption = 'Matplotlib backend_wx error',
style=wx.OK | wx.CENTRE)
dialog.ShowModal()
dialog.Destroy()
return None
def raise_msg_to_str(msg):
"""msg is a return arg from a raise. Join with new lines"""
if not is_string_like(msg):
msg = '\n'.join(map(str, msg))
return msg
class TimerWx(TimerBase):
'''
Subclass of :class:`backend_bases.TimerBase` that uses WxTimer events.
Attributes:
* interval: The time between timer events in milliseconds. Default
is 1000 ms.
* single_shot: Boolean flag indicating whether this timer should
operate as single shot (run once and then stop). Defaults to False.
* callbacks: Stores list of (func, args) tuples that will be called
upon timer events. This list can be manipulated directly, or the
functions add_callback and remove_callback can be used.
'''
def __init__(self, parent, *args, **kwargs):
TimerBase.__init__(self, *args, **kwargs)
# Create a new timer and connect the timer event to our handler.
# For WX, the events have to use a widget for binding.
self.parent = parent
self._timer = wx.Timer(self.parent, wx.NewId())
self.parent.Bind(wx.EVT_TIMER, self._on_timer, self._timer)
# Unbinding causes Wx to stop for some reason. Disabling for now.
# def __del__(self):
# TimerBase.__del__(self)
# self.parent.Bind(wx.EVT_TIMER, None, self._timer)
def _timer_start(self):
self._timer.Start(self._interval, self._single)
def _timer_stop(self):
self._timer.Stop()
def _timer_set_interval(self):
self._timer_start()
def _timer_set_single_shot(self):
self._timer.start()
def _on_timer(self, *args):
TimerBase._on_timer(self)
class RendererWx(RendererBase):
"""
The renderer handles all the drawing primitives using a graphics
context instance that controls the colors/styles. It acts as the
'renderer' instance used by many classes in the hierarchy.
"""
#In wxPython, drawing is performed on a wxDC instance, which will
#generally be mapped to the client aread of the window displaying
#the plot. Under wxPython, the wxDC instance has a wx.Pen which
#describes the colour and weight of any lines drawn, and a wxBrush
#which describes the fill colour of any closed polygon.
fontweights = {
100 : wx.LIGHT,
200 : wx.LIGHT,
300 : wx.LIGHT,
400 : wx.NORMAL,
500 : wx.NORMAL,
600 : wx.NORMAL,
700 : wx.BOLD,
800 : wx.BOLD,
900 : wx.BOLD,
'ultralight' : wx.LIGHT,
'light' : wx.LIGHT,
'normal' : wx.NORMAL,
'medium' : wx.NORMAL,
'semibold' : wx.NORMAL,
'bold' : wx.BOLD,
'heavy' : wx.BOLD,
'ultrabold' : wx.BOLD,
'black' : wx.BOLD
}
fontangles = {
'italic' : wx.ITALIC,
'normal' : wx.NORMAL,
'oblique' : wx.SLANT }
# wxPython allows for portable font styles, choosing them appropriately
# for the target platform. Map some standard font names to the portable
# styles
# QUESTION: Is it be wise to agree standard fontnames across all backends?
fontnames = { 'Sans' : wx.SWISS,
'Roman' : wx.ROMAN,
'Script' : wx.SCRIPT,
'Decorative' : wx.DECORATIVE,
'Modern' : wx.MODERN,
'Courier' : wx.MODERN,
'courier' : wx.MODERN }
def __init__(self, bitmap, dpi):
"""
Initialise a wxWindows renderer instance.
"""
DEBUG_MSG("__init__()", 1, self)
if wx.VERSION_STRING < "2.8":
raise RuntimeError("matplotlib no longer supports wxPython < 2.8 for the Wx backend.\nYou may, however, use the WxAgg backend.")
self.width = bitmap.GetWidth()
self.height = bitmap.GetHeight()
self.bitmap = bitmap
self.fontd = {}
self.dpi = dpi
self.gc = None
def flipy(self):
return True
def offset_text_height(self):
return True
def get_text_width_height_descent(self, s, prop, ismath):
"""
get the width and height in display coords of the string s
with FontPropertry prop
"""
#return 1, 1
if ismath: s = self.strip_math(s)
if self.gc is None:
gc = self.new_gc()
else:
gc = self.gc
gfx_ctx = gc.gfx_ctx
font = self.get_wx_font(s, prop)
gfx_ctx.SetFont(font, wx.BLACK)
w, h, descent, leading = gfx_ctx.GetFullTextExtent(s)
return w, h, descent
def get_canvas_width_height(self):
'return the canvas width and height in display coords'
return self.width, self.height
def handle_clip_rectangle(self, gc):
new_bounds = gc.get_clip_rectangle()
if new_bounds is not None:
new_bounds = new_bounds.bounds
gfx_ctx = gc.gfx_ctx
if gfx_ctx._lastcliprect != new_bounds:
gfx_ctx._lastcliprect = new_bounds
if new_bounds is None:
gfx_ctx.ResetClip()
else:
gfx_ctx.Clip(new_bounds[0], self.height - new_bounds[1] - new_bounds[3],
new_bounds[2], new_bounds[3])
@staticmethod
def convert_path(gfx_ctx, path, transform):
wxpath = gfx_ctx.CreatePath()
for points, code in path.iter_segments(transform):
if code == Path.MOVETO:
wxpath.MoveToPoint(*points)
elif code == Path.LINETO:
wxpath.AddLineToPoint(*points)
elif code == Path.CURVE3:
wxpath.AddQuadCurveToPoint(*points)
elif code == Path.CURVE4:
wxpath.AddCurveToPoint(*points)
elif code == Path.CLOSEPOLY:
wxpath.CloseSubpath()
return wxpath
def draw_path(self, gc, path, transform, rgbFace=None):
gc.select()
self.handle_clip_rectangle(gc)
gfx_ctx = gc.gfx_ctx
transform = transform + Affine2D().scale(1.0, -1.0).translate(0.0, self.height)
wxpath = self.convert_path(gfx_ctx, path, transform)
if rgbFace is not None:
gfx_ctx.SetBrush(wx.Brush(gc.get_wxcolour(rgbFace)))
gfx_ctx.DrawPath(wxpath)
else:
gfx_ctx.StrokePath(wxpath)
gc.unselect()
def draw_image(self, gc, x, y, im):
bbox = gc.get_clip_rectangle()
if bbox != None:
l,b,w,h = bbox.bounds
else:
l=0
b=0,
w=self.width
h=self.height
rows, cols, image_str = im.as_rgba_str()
image_array = np.fromstring(image_str, np.uint8)
image_array.shape = rows, cols, 4
bitmap = wx.BitmapFromBufferRGBA(cols,rows,image_array)
gc = self.get_gc()
gc.select()
gc.gfx_ctx.DrawBitmap(bitmap,int(l),int(self.height-b),int(w),int(-h))
gc.unselect()
def draw_text(self, gc, x, y, s, prop, angle, ismath):
"""
Render the matplotlib.text.Text instance
None)
"""
if ismath: s = self.strip_math(s)
DEBUG_MSG("draw_text()", 1, self)
gc.select()
self.handle_clip_rectangle(gc)
gfx_ctx = gc.gfx_ctx
font = self.get_wx_font(s, prop)
color = gc.get_wxcolour(gc.get_rgb())
gfx_ctx.SetFont(font, color)
w, h, d = self.get_text_width_height_descent(s, prop, ismath)
x = int(x)
y = int(y-h)
if angle == 0.0:
gfx_ctx.DrawText(s, x, y)
else:
rads = angle / 180.0 * math.pi
xo = h * math.sin(rads)
yo = h * math.cos(rads)
gfx_ctx.DrawRotatedText(s, x - xo, y - yo, rads)
gc.unselect()
def new_gc(self):
"""
Return an instance of a GraphicsContextWx, and sets the current gc copy
"""
DEBUG_MSG('new_gc()', 2, self)
self.gc = GraphicsContextWx(self.bitmap, self)
self.gc.select()
self.gc.unselect()
return self.gc
def get_gc(self):
"""
Fetch the locally cached gc.
"""
# This is a dirty hack to allow anything with access to a renderer to
# access the current graphics context
assert self.gc != None, "gc must be defined"
return self.gc
def get_wx_font(self, s, prop):
"""
Return a wx font. Cache instances in a font dictionary for
efficiency
"""
DEBUG_MSG("get_wx_font()", 1, self)
key = hash(prop)
fontprop = prop
fontname = fontprop.get_name()
font = self.fontd.get(key)
if font is not None:
return font
# Allow use of platform independent and dependent font names
wxFontname = self.fontnames.get(fontname, wx.ROMAN)
wxFacename = '' # Empty => wxPython chooses based on wx_fontname
# Font colour is determined by the active wx.Pen
# TODO: It may be wise to cache font information
size = self.points_to_pixels(fontprop.get_size_in_points())
font =wx.Font(int(size+0.5), # Size
wxFontname, # 'Generic' name
self.fontangles[fontprop.get_style()], # Angle
self.fontweights[fontprop.get_weight()], # Weight
False, # Underline
wxFacename) # Platform font name
# cache the font and gc and return it
self.fontd[key] = font
return font
def points_to_pixels(self, points):
"""
convert point measures to pixes using dpi and the pixels per
inch of the display
"""
return points*(PIXELS_PER_INCH/72.0*self.dpi/72.0)
class GraphicsContextWx(GraphicsContextBase):
"""
The graphics context provides the color, line styles, etc...
This class stores a reference to a wxMemoryDC, and a
wxGraphicsContext that draws to it. Creating a wxGraphicsContext
seems to be fairly heavy, so these objects are cached based on the
bitmap object that is passed in.
The base GraphicsContext stores colors as a RGB tuple on the unit
interval, eg, (0.5, 0.0, 1.0). wxPython uses an int interval, but
since wxPython colour management is rather simple, I have not chosen
to implement a separate colour manager class.
"""
_capd = { 'butt': wx.CAP_BUTT,
'projecting': wx.CAP_PROJECTING,
'round': wx.CAP_ROUND }
_joind = { 'bevel': wx.JOIN_BEVEL,
'miter': wx.JOIN_MITER,
'round': wx.JOIN_ROUND }
_dashd_wx = { 'solid': wx.SOLID,
'dashed': wx.SHORT_DASH,
'dashdot': wx.DOT_DASH,
'dotted': wx.DOT }
_cache = weakref.WeakKeyDictionary()
def __init__(self, bitmap, renderer):
GraphicsContextBase.__init__(self)
#assert self.Ok(), "wxMemoryDC not OK to use"
DEBUG_MSG("__init__()", 1, self)
dc, gfx_ctx = self._cache.get(bitmap, (None, None))
if dc is None:
dc = wx.MemoryDC()
dc.SelectObject(bitmap)
gfx_ctx = wx.GraphicsContext.Create(dc)
gfx_ctx._lastcliprect = None
self._cache[bitmap] = dc, gfx_ctx
self.bitmap = bitmap
self.dc = dc
self.gfx_ctx = gfx_ctx
self._pen = wx.Pen('BLACK', 1, wx.SOLID)
gfx_ctx.SetPen(self._pen)
self._style = wx.SOLID
self.renderer = renderer
def select(self):
"""
Select the current bitmap into this wxDC instance
"""
if sys.platform=='win32':
self.dc.SelectObject(self.bitmap)
self.IsSelected = True
def unselect(self):
"""
Select a Null bitmasp into this wxDC instance
"""
if sys.platform=='win32':
self.dc.SelectObject(wx.NullBitmap)
self.IsSelected = False
def set_foreground(self, fg, isRGB=None):
"""
Set the foreground color. fg can be a matlab format string, a
html hex color string, an rgb unit tuple, or a float between 0
and 1. In the latter case, grayscale is used.
"""
# Implementation note: wxPython has a separate concept of pen and
# brush - the brush fills any outline trace left by the pen.
# Here we set both to the same colour - if a figure is not to be
# filled, the renderer will set the brush to be transparent
# Same goes for text foreground...
DEBUG_MSG("set_foreground()", 1, self)
self.select()
GraphicsContextBase.set_foreground(self, fg, isRGB)
self._pen.SetColour(self.get_wxcolour(self.get_rgb()))
self.gfx_ctx.SetPen(self._pen)
self.unselect()
def set_graylevel(self, frac):
"""
Set the foreground color. fg can be a matlab format string, a
html hex color string, an rgb unit tuple, or a float between 0
and 1. In the latter case, grayscale is used.
"""
DEBUG_MSG("set_graylevel()", 1, self)
self.select()
GraphicsContextBase.set_graylevel(self, frac)
self._pen.SetColour(self.get_wxcolour(self.get_rgb()))
self.gfx_ctx.SetPen(self._pen)
self.unselect()
def set_linewidth(self, w):
"""
Set the line width.
"""
DEBUG_MSG("set_linewidth()", 1, self)
self.select()
if w>0 and w<1: w = 1
GraphicsContextBase.set_linewidth(self, w)
lw = int(self.renderer.points_to_pixels(self._linewidth))
if lw==0: lw = 1
self._pen.SetWidth(lw)
self.gfx_ctx.SetPen(self._pen)
self.unselect()
def set_capstyle(self, cs):
"""
Set the capstyle as a string in ('butt', 'round', 'projecting')
"""
DEBUG_MSG("set_capstyle()", 1, self)
self.select()
GraphicsContextBase.set_capstyle(self, cs)
self._pen.SetCap(GraphicsContextWx._capd[self._capstyle])
self.gfx_ctx.SetPen(self._pen)
self.unselect()
def set_joinstyle(self, js):
"""
Set the join style to be one of ('miter', 'round', 'bevel')
"""
DEBUG_MSG("set_joinstyle()", 1, self)
self.select()
GraphicsContextBase.set_joinstyle(self, js)
self._pen.SetJoin(GraphicsContextWx._joind[self._joinstyle])
self.gfx_ctx.SetPen(self._pen)
self.unselect()
def set_linestyle(self, ls):
"""
Set the line style to be one of
"""
DEBUG_MSG("set_linestyle()", 1, self)
self.select()
GraphicsContextBase.set_linestyle(self, ls)
try:
self._style = GraphicsContextWx._dashd_wx[ls]
except KeyError:
self._style = wx.LONG_DASH# Style not used elsewhere...
# On MS Windows platform, only line width of 1 allowed for dash lines
if wx.Platform == '__WXMSW__':
self.set_linewidth(1)
self._pen.SetStyle(self._style)
self.gfx_ctx.SetPen(self._pen)
self.unselect()
def get_wxcolour(self, color):
"""return a wx.Colour from RGB format"""
DEBUG_MSG("get_wx_color()", 1, self)
if len(color) == 3:
r, g, b = color
r *= 255
g *= 255
b *= 255
return wx.Colour(red=int(r), green=int(g), blue=int(b))
else:
r, g, b, a = color
r *= 255
g *= 255
b *= 255
a *= 255
return wx.Colour(red=int(r), green=int(g), blue=int(b), alpha=int(a))
class FigureCanvasWx(FigureCanvasBase, wx.Panel):
"""
The FigureCanvas contains the figure and does event handling.
In the wxPython backend, it is derived from wxPanel, and (usually) lives
inside a frame instantiated by a FigureManagerWx. The parent window probably
implements a wx.Sizer to control the displayed control size - but we give a
hint as to our preferred minimum size.
"""
keyvald = {
wx.WXK_CONTROL : 'control',
wx.WXK_SHIFT : 'shift',
wx.WXK_ALT : 'alt',
wx.WXK_LEFT : 'left',
wx.WXK_UP : 'up',
wx.WXK_RIGHT : 'right',
wx.WXK_DOWN : 'down',
wx.WXK_ESCAPE : 'escape',
wx.WXK_F1 : 'f1',
wx.WXK_F2 : 'f2',
wx.WXK_F3 : 'f3',
wx.WXK_F4 : 'f4',
wx.WXK_F5 : 'f5',
wx.WXK_F6 : 'f6',
wx.WXK_F7 : 'f7',
wx.WXK_F8 : 'f8',
wx.WXK_F9 : 'f9',
wx.WXK_F10 : 'f10',
wx.WXK_F11 : 'f11',
wx.WXK_F12 : 'f12',
wx.WXK_SCROLL : 'scroll_lock',
wx.WXK_PAUSE : 'break',
wx.WXK_BACK : 'backspace',
wx.WXK_RETURN : 'enter',
wx.WXK_INSERT : 'insert',
wx.WXK_DELETE : 'delete',
wx.WXK_HOME : 'home',
wx.WXK_END : 'end',
wx.WXK_PRIOR : 'pageup',
wx.WXK_NEXT : 'pagedown',
wx.WXK_PAGEUP : 'pageup',
wx.WXK_PAGEDOWN : 'pagedown',
wx.WXK_NUMPAD0 : '0',
wx.WXK_NUMPAD1 : '1',
wx.WXK_NUMPAD2 : '2',
wx.WXK_NUMPAD3 : '3',
wx.WXK_NUMPAD4 : '4',
wx.WXK_NUMPAD5 : '5',
wx.WXK_NUMPAD6 : '6',
wx.WXK_NUMPAD7 : '7',
wx.WXK_NUMPAD8 : '8',
wx.WXK_NUMPAD9 : '9',
wx.WXK_NUMPAD_ADD : '+',
wx.WXK_NUMPAD_SUBTRACT : '-',
wx.WXK_NUMPAD_MULTIPLY : '*',
wx.WXK_NUMPAD_DIVIDE : '/',
wx.WXK_NUMPAD_DECIMAL : 'dec',
wx.WXK_NUMPAD_ENTER : 'enter',
wx.WXK_NUMPAD_UP : 'up',
wx.WXK_NUMPAD_RIGHT : 'right',
wx.WXK_NUMPAD_DOWN : 'down',
wx.WXK_NUMPAD_LEFT : 'left',
wx.WXK_NUMPAD_PRIOR : 'pageup',
wx.WXK_NUMPAD_NEXT : 'pagedown',
wx.WXK_NUMPAD_PAGEUP : 'pageup',
wx.WXK_NUMPAD_PAGEDOWN : 'pagedown',
wx.WXK_NUMPAD_HOME : 'home',
wx.WXK_NUMPAD_END : 'end',
wx.WXK_NUMPAD_INSERT : 'insert',
wx.WXK_NUMPAD_DELETE : 'delete',
}
def __init__(self, parent, id, figure):
"""
Initialise a FigureWx instance.
- Initialise the FigureCanvasBase and wxPanel parents.
- Set event handlers for:
EVT_SIZE (Resize event)
EVT_PAINT (Paint event)
"""
FigureCanvasBase.__init__(self, figure)
# Set preferred window size hint - helps the sizer (if one is
# connected)
l,b,w,h = figure.bbox.bounds
w = int(math.ceil(w))
h = int(math.ceil(h))
wx.Panel.__init__(self, parent, id, size=wx.Size(w, h))
def do_nothing(*args, **kwargs):
warnings.warn('could not find a setinitialsize function for backend_wx; please report your wxpython version=%s to the matplotlib developers list'%backend_version)
pass
# try to find the set size func across wx versions
try:
getattr(self, 'SetInitialSize')
except AttributeError:
self.SetInitialSize = getattr(self, 'SetBestFittingSize', do_nothing)
if not hasattr(self,'IsShownOnScreen'):
self.IsShownOnScreen = getattr(self, 'IsVisible', lambda *args: True)
# Create the drawing bitmap
self.bitmap =wx.EmptyBitmap(w, h)
DEBUG_MSG("__init__() - bitmap w:%d h:%d" % (w,h), 2, self)
# TODO: Add support for 'point' inspection and plot navigation.
self._isDrawn = False
bind(self, wx.EVT_SIZE, self._onSize)
bind(self, wx.EVT_PAINT, self._onPaint)
bind(self, wx.EVT_ERASE_BACKGROUND, self._onEraseBackground)
bind(self, wx.EVT_KEY_DOWN, self._onKeyDown)
bind(self, wx.EVT_KEY_UP, self._onKeyUp)
bind(self, wx.EVT_RIGHT_DOWN, self._onRightButtonDown)
bind(self, wx.EVT_RIGHT_DCLICK, self._onRightButtonDClick)
bind(self, wx.EVT_RIGHT_UP, self._onRightButtonUp)
bind(self, wx.EVT_MOUSEWHEEL, self._onMouseWheel)
bind(self, wx.EVT_LEFT_DOWN, self._onLeftButtonDown)
bind(self, wx.EVT_LEFT_DCLICK, self._onLeftButtonDClick)
bind(self, wx.EVT_LEFT_UP, self._onLeftButtonUp)
bind(self, wx.EVT_MOTION, self._onMotion)
bind(self, wx.EVT_LEAVE_WINDOW, self._onLeave)
bind(self, wx.EVT_ENTER_WINDOW, self._onEnter)
bind(self, wx.EVT_IDLE, self._onIdle)
#Add middle button events
bind(self, wx.EVT_MIDDLE_DOWN, self._onMiddleButtonDown)
bind(self, wx.EVT_MIDDLE_DCLICK, self._onMiddleButtonDClick)
bind(self, wx.EVT_MIDDLE_UP, self._onMiddleButtonUp)
self.SetBackgroundStyle(wx.BG_STYLE_CUSTOM)
self.macros = {} # dict from wx id to seq of macros
# printer attributes and methods deprecated, 2010/06/19
self._printerData = None
self._printerPageData = None
self.printer_width = 5.5
self.printer_margin = 0.5
def Destroy(self, *args, **kwargs):
wx.Panel.Destroy(self, *args, **kwargs)
def Copy_to_Clipboard(self, event=None):
"copy bitmap of canvas to system clipboard"
bmp_obj = wx.BitmapDataObject()
bmp_obj.SetBitmap(self.bitmap)
if not wx.TheClipboard.IsOpened():
open_success = wx.TheClipboard.Open()
if open_success:
wx.TheClipboard.SetData(bmp_obj)
wx.TheClipboard.Close()
wx.TheClipboard.Flush()
def Printer_Init(self):
"""
initialize printer settings using wx methods
Deprecated.
"""
warnings.warn("Printer* methods will be removed", DeprecationWarning)
self.printerData = wx.PrintData()
self.printerData.SetPaperId(wx.PAPER_LETTER)
self.printerData.SetPrintMode(wx.PRINT_MODE_PRINTER)
self.printerPageData= wx.PageSetupDialogData()
self.printerPageData.SetMarginBottomRight((25,25))
self.printerPageData.SetMarginTopLeft((25,25))
self.printerPageData.SetPrintData(self.printerData)
self.printer_width = 5.5
self.printer_margin= 0.5
def _get_printerData(self):
if self._printerData is None:
warnings.warn("Printer* methods will be removed", DeprecationWarning)
self._printerData = wx.PrintData()
self._printerData.SetPaperId(wx.PAPER_LETTER)
self._printerData.SetPrintMode(wx.PRINT_MODE_PRINTER)
return self._printerData
printerData = property(_get_printerData)
def _get_printerPageData(self):
if self._printerPageData is None:
warnings.warn("Printer* methods will be removed", DeprecationWarning)
self._printerPageData= wx.PageSetupDialogData()
self._printerPageData.SetMarginBottomRight((25,25))
self._printerPageData.SetMarginTopLeft((25,25))
self._printerPageData.SetPrintData(self.printerData)
return self._printerPageData
printerPageData = property(_get_printerPageData)
def Printer_Setup(self, event=None):
"""
set up figure for printing. The standard wx Printer
Setup Dialog seems to die easily. Therefore, this setup
simply asks for image width and margin for printing.
Deprecated.
"""
dmsg = """Width of output figure in inches.
The current aspect ratio will be kept."""
warnings.warn("Printer* methods will be removed", DeprecationWarning)
dlg = wx.Dialog(self, -1, 'Page Setup for Printing' , (-1,-1))
df = dlg.GetFont()
df.SetWeight(wx.NORMAL)
df.SetPointSize(11)
dlg.SetFont(df)
x_wid = wx.TextCtrl(dlg,-1,value="%.2f" % self.printer_width, size=(70,-1))
x_mrg = wx.TextCtrl(dlg,-1,value="%.2f" % self.printer_margin,size=(70,-1))
sizerAll = wx.BoxSizer(wx.VERTICAL)
sizerAll.Add(wx.StaticText(dlg,-1,dmsg),
0, wx.ALL | wx.EXPAND, 5)
sizer = wx.FlexGridSizer(0,3)
sizerAll.Add(sizer, 0, wx.ALL | wx.EXPAND, 5)
sizer.Add(wx.StaticText(dlg,-1,'Figure Width'),
1, wx.ALIGN_LEFT|wx.ALL, 2)
sizer.Add(x_wid,
1, wx.ALIGN_LEFT|wx.ALL, 2)
sizer.Add(wx.StaticText(dlg,-1,'in'),
1, wx.ALIGN_LEFT|wx.ALL, 2)
sizer.Add(wx.StaticText(dlg,-1,'Margin'),
1, wx.ALIGN_LEFT|wx.ALL, 2)
sizer.Add(x_mrg,
1, wx.ALIGN_LEFT|wx.ALL, 2)
sizer.Add(wx.StaticText(dlg,-1,'in'),
1, wx.ALIGN_LEFT|wx.ALL, 2)
btn = wx.Button(dlg,wx.ID_OK, " OK ")
btn.SetDefault()
sizer.Add(btn, 1, wx.ALIGN_LEFT, 5)
btn = wx.Button(dlg,wx.ID_CANCEL, " CANCEL ")
sizer.Add(btn, 1, wx.ALIGN_LEFT, 5)
dlg.SetSizer(sizerAll)
dlg.SetAutoLayout(True)
sizerAll.Fit(dlg)
if dlg.ShowModal() == wx.ID_OK:
try:
self.printer_width = float(x_wid.GetValue())
self.printer_margin = float(x_mrg.GetValue())
except:
pass
if ((self.printer_width + self.printer_margin) > 7.5):
self.printerData.SetOrientation(wx.LANDSCAPE)
else:
self.printerData.SetOrientation(wx.PORTRAIT)
dlg.Destroy()
return
def Printer_Setup2(self, event=None):
"""
set up figure for printing. Using the standard wx Printer
Setup Dialog.
Deprecated.
"""
warnings.warn("Printer* methods will be removed", DeprecationWarning)
if hasattr(self, 'printerData'):
data = wx.PageSetupDialogData()
data.SetPrintData(self.printerData)
else:
data = wx.PageSetupDialogData()
data.SetMarginTopLeft( (15, 15) )
data.SetMarginBottomRight( (15, 15) )
dlg = wx.PageSetupDialog(self, data)
if dlg.ShowModal() == wx.ID_OK:
data = dlg.GetPageSetupData()
tl = data.GetMarginTopLeft()
br = data.GetMarginBottomRight()
self.printerData = wx.PrintData(data.GetPrintData())
dlg.Destroy()
def Printer_Preview(self, event=None):
"""
generate Print Preview with wx Print mechanism
Deprecated.
"""
warnings.warn("Printer* methods will be removed", DeprecationWarning)
po1 = PrintoutWx(self, width=self.printer_width,
margin=self.printer_margin)
po2 = PrintoutWx(self, width=self.printer_width,
margin=self.printer_margin)
self.preview = wx.PrintPreview(po1,po2,self.printerData)
if not self.preview.Ok(): print("error with preview")
self.preview.SetZoom(50)
frameInst= self
while not isinstance(frameInst, wx.Frame):
frameInst= frameInst.GetParent()
frame = wx.PreviewFrame(self.preview, frameInst, "Preview")
frame.Initialize()
frame.SetPosition(self.GetPosition())
frame.SetSize((850,650))
frame.Centre(wx.BOTH)
frame.Show(True)
self.gui_repaint()
def Printer_Print(self, event=None):
"""
Print figure using wx Print mechanism
Deprecated.
"""
warnings.warn("Printer* methods will be removed", DeprecationWarning)
pdd = wx.PrintDialogData()
# SetPrintData for 2.4 combatibility
pdd.SetPrintData(self.printerData)
pdd.SetToPage(1)
printer = wx.Printer(pdd)
printout = PrintoutWx(self, width=int(self.printer_width),
margin=int(self.printer_margin))
print_ok = printer.Print(self, printout, True)
if wx.VERSION_STRING >= '2.5':
if not print_ok and not printer.GetLastError() == wx.PRINTER_CANCELLED:
wx.MessageBox("""There was a problem printing.
Perhaps your current printer is not set correctly?""",
"Printing", wx.OK)
else:
if not print_ok:
wx.MessageBox("""There was a problem printing.
Perhaps your current printer is not set correctly?""",
"Printing", wx.OK)
printout.Destroy()
self.gui_repaint()
def draw_idle(self):
"""
Delay rendering until the GUI is idle.
"""
DEBUG_MSG("draw_idle()", 1, self)
self._isDrawn = False # Force redraw
# Create a timer for handling draw_idle requests
# If there are events pending when the timer is
# complete, reset the timer and continue. The
# alternative approach, binding to wx.EVT_IDLE,
# doesn't behave as nicely.
if hasattr(self,'_idletimer'):
self._idletimer.Restart(IDLE_DELAY)
else:
self._idletimer = wx.FutureCall(IDLE_DELAY,self._onDrawIdle)
# FutureCall is a backwards-compatible alias;
# CallLater became available in 2.7.1.1.
def _onDrawIdle(self, *args, **kwargs):
if wx.GetApp().Pending():
self._idletimer.Restart(IDLE_DELAY, *args, **kwargs)
else:
del self._idletimer
# GUI event or explicit draw call may already
# have caused the draw to take place
if not self._isDrawn:
self.draw(*args, **kwargs)
def draw(self, drawDC=None):
"""
Render the figure using RendererWx instance renderer, or using a
previously defined renderer if none is specified.
"""
DEBUG_MSG("draw()", 1, self)
self.renderer = RendererWx(self.bitmap, self.figure.dpi)
self.figure.draw(self.renderer)
self._isDrawn = True
self.gui_repaint(drawDC=drawDC)
def new_timer(self, *args, **kwargs):
"""
Creates a new backend-specific subclass of :class:`backend_bases.Timer`.
This is useful for getting periodic events through the backend's native
event loop. Implemented only for backends with GUIs.
optional arguments:
*interval*
Timer interval in milliseconds
*callbacks*
Sequence of (func, args, kwargs) where func(*args, **kwargs) will
be executed by the timer every *interval*.
"""
return TimerWx(self, *args, **kwargs)
def flush_events(self):
wx.Yield()
def start_event_loop(self, timeout=0):
"""
Start an event loop. This is used to start a blocking event
loop so that interactive functions, such as ginput and
waitforbuttonpress, can wait for events. This should not be
confused with the main GUI event loop, which is always running
and has nothing to do with this.
Call signature::
start_event_loop(self,timeout=0)
This call blocks until a callback function triggers
stop_event_loop() or *timeout* is reached. If *timeout* is
<=0, never timeout.
Raises RuntimeError if event loop is already running.
"""
if hasattr(self, '_event_loop'):
raise RuntimeError("Event loop already running")
id = wx.NewId()
timer = wx.Timer(self, id=id)
if timeout > 0:
timer.Start(timeout*1000, oneShot=True)
bind(self, wx.EVT_TIMER, self.stop_event_loop, id=id)
# Event loop handler for start/stop event loop
self._event_loop = wx.EventLoop()
self._event_loop.Run()
timer.Stop()
def stop_event_loop(self, event=None):
"""
Stop an event loop. This is used to stop a blocking event
loop so that interactive functions, such as ginput and
waitforbuttonpress, can wait for events.
Call signature::
stop_event_loop_default(self)
"""
if hasattr(self,'_event_loop'):
if self._event_loop.IsRunning():
self._event_loop.Exit()
del self._event_loop
def _get_imagesave_wildcards(self):
'return the wildcard string for the filesave dialog'
default_filetype = self.get_default_filetype()
filetypes = self.get_supported_filetypes_grouped()
sorted_filetypes = filetypes.items()
sorted_filetypes.sort()
wildcards = []
extensions = []
filter_index = 0
for i, (name, exts) in enumerate(sorted_filetypes):
ext_list = ';'.join(['*.%s' % ext for ext in exts])
extensions.append(exts[0])
wildcard = '%s (%s)|%s' % (name, ext_list, ext_list)
if default_filetype in exts:
filter_index = i
wildcards.append(wildcard)
wildcards = '|'.join(wildcards)
return wildcards, extensions, filter_index
def gui_repaint(self, drawDC=None):
"""
Performs update of the displayed image on the GUI canvas, using the
supplied device context. If drawDC is None, a ClientDC will be used to
redraw the image.
"""
DEBUG_MSG("gui_repaint()", 1, self)
if self.IsShownOnScreen():
if drawDC is None:
drawDC=wx.ClientDC(self)
drawDC.BeginDrawing()
drawDC.DrawBitmap(self.bitmap, 0, 0)
drawDC.EndDrawing()
#wx.GetApp().Yield()
else:
pass
filetypes = FigureCanvasBase.filetypes.copy()
filetypes['bmp'] = 'Windows bitmap'
filetypes['jpeg'] = 'JPEG'
filetypes['jpg'] = 'JPEG'
filetypes['pcx'] = 'PCX'
filetypes['png'] = 'Portable Network Graphics'
filetypes['tif'] = 'Tagged Image Format File'
filetypes['tiff'] = 'Tagged Image Format File'
filetypes['xpm'] = 'X pixmap'
def print_figure(self, filename, *args, **kwargs):
# Use pure Agg renderer to draw
FigureCanvasBase.print_figure(self, filename, *args, **kwargs)
# Restore the current view; this is needed because the
# artist contains methods rely on particular attributes
# of the rendered figure for determining things like
# bounding boxes.
if self._isDrawn:
self.draw()
def print_bmp(self, filename, *args, **kwargs):
return self._print_image(filename, wx.BITMAP_TYPE_BMP, *args, **kwargs)
def print_jpeg(self, filename, *args, **kwargs):
return self._print_image(filename, wx.BITMAP_TYPE_JPEG, *args, **kwargs)
print_jpg = print_jpeg
def print_pcx(self, filename, *args, **kwargs):
return self._print_image(filename, wx.BITMAP_TYPE_PCX, *args, **kwargs)
def print_png(self, filename, *args, **kwargs):
return self._print_image(filename, wx.BITMAP_TYPE_PNG, *args, **kwargs)
def print_tiff(self, filename, *args, **kwargs):
return self._print_image(filename, wx.BITMAP_TYPE_TIF, *args, **kwargs)
print_tif = print_tiff
def print_xpm(self, filename, *args, **kwargs):
return self._print_image(filename, wx.BITMAP_TYPE_XPM, *args, **kwargs)
def _print_image(self, filename, filetype, *args, **kwargs):
origBitmap = self.bitmap
l,b,width,height = self.figure.bbox.bounds
width = int(math.ceil(width))
height = int(math.ceil(height))
self.bitmap = wx.EmptyBitmap(width, height)
renderer = RendererWx(self.bitmap, self.figure.dpi)
gc = renderer.new_gc()
self.figure.draw(renderer)
# Now that we have rendered into the bitmap, save it
# to the appropriate file type and clean up
if is_string_like(filename):
if not self.bitmap.SaveFile(filename, filetype):
DEBUG_MSG('print_figure() file save error', 4, self)
raise RuntimeError('Could not save figure to %s\n' % (filename))
elif is_writable_file_like(filename):
if not self.bitmap.ConvertToImage().SaveStream(filename, filetype):
DEBUG_MSG('print_figure() file save error', 4, self)
raise RuntimeError('Could not save figure to %s\n' % (filename))
# Restore everything to normal
self.bitmap = origBitmap
# Note: draw is required here since bits of state about the
# last renderer are strewn about the artist draw methods. Do
# not remove the draw without first verifying that these have
# been cleaned up. The artist contains() methods will fail
# otherwise.
if self._isDrawn:
self.draw()
self.Refresh()
def _onPaint(self, evt):
"""
Called when wxPaintEvt is generated
"""
DEBUG_MSG("_onPaint()", 1, self)
drawDC = wx.PaintDC(self)
if not self._isDrawn:
self.draw(drawDC=drawDC)
else:
self.gui_repaint(drawDC=drawDC)
evt.Skip()
def _onEraseBackground(self, evt):
"""
Called when window is redrawn; since we are blitting the entire
image, we can leave this blank to suppress flicker.
"""
pass
def _onSize(self, evt):
"""
Called when wxEventSize is generated.
In this application we attempt to resize to fit the window, so it
is better to take the performance hit and redraw the whole window.
"""
DEBUG_MSG("_onSize()", 2, self)
# Create a new, correctly sized bitmap
self._width, self._height = self.GetClientSize()
self.bitmap =wx.EmptyBitmap(self._width, self._height)
self._isDrawn = False
if self._width <= 1 or self._height <= 1: return # Empty figure
dpival = self.figure.dpi
winch = self._width/dpival
hinch = self._height/dpival
self.figure.set_size_inches(winch, hinch)
# Rendering will happen on the associated paint event
# so no need to do anything here except to make sure
# the whole background is repainted.
self.Refresh(eraseBackground=False)
FigureCanvasBase.resize_event(self)
def _get_key(self, evt):
keyval = evt.m_keyCode
if keyval in self.keyvald:
key = self.keyvald[keyval]
elif keyval < 256:
key = chr(keyval)
# wx always returns an uppercase, so make it lowercase if the shift
# key is not depressed (NOTE: this will not handle Caps Lock)
if not evt.ShiftDown():
key = key.lower()
else:
key = None
for meth, prefix in (
[evt.AltDown, 'alt'],
[evt.ControlDown, 'ctrl'], ):
if meth():
key = '{}+{}'.format(prefix, key)
return key
def _onIdle(self, evt):
'a GUI idle event'
evt.Skip()
FigureCanvasBase.idle_event(self, guiEvent=evt)
def _onKeyDown(self, evt):
"""Capture key press."""
key = self._get_key(evt)
evt.Skip()
FigureCanvasBase.key_press_event(self, key, guiEvent=evt)
def _onKeyUp(self, evt):
"""Release key."""
key = self._get_key(evt)
#print 'release key', key
evt.Skip()
FigureCanvasBase.key_release_event(self, key, guiEvent=evt)
def _onRightButtonDown(self, evt):
"""Start measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
evt.Skip()
self.CaptureMouse()
FigureCanvasBase.button_press_event(self, x, y, 3, guiEvent=evt)
def _onRightButtonDClick(self, evt):
"""Start measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
evt.Skip()
self.CaptureMouse()
FigureCanvasBase.button_press_event(self, x, y, 3, dblclick=True,guiEvent=evt)
def _onRightButtonUp(self, evt):
"""End measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
evt.Skip()
if self.HasCapture(): self.ReleaseMouse()
FigureCanvasBase.button_release_event(self, x, y, 3, guiEvent=evt)
def _onLeftButtonDown(self, evt):
"""Start measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
evt.Skip()
self.CaptureMouse()
FigureCanvasBase.button_press_event(self, x, y, 1, guiEvent=evt)
def _onLeftButtonDClick(self, evt):
"""Start measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
evt.Skip()
self.CaptureMouse()
FigureCanvasBase.button_press_event(self, x, y, 1, dblclick=True, guiEvent=evt)
def _onLeftButtonUp(self, evt):
"""End measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
#print 'release button', 1
evt.Skip()
if self.HasCapture(): self.ReleaseMouse()
FigureCanvasBase.button_release_event(self, x, y, 1, guiEvent=evt)
#Add middle button events
def _onMiddleButtonDown(self, evt):
"""Start measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
evt.Skip()
self.CaptureMouse()
FigureCanvasBase.button_press_event(self, x, y, 2, guiEvent=evt)
def _onMiddleButtonDClick(self, evt):
"""Start measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
evt.Skip()
self.CaptureMouse()
FigureCanvasBase.button_press_event(self, x, y, 2, dblclick=True, guiEvent=evt)
def _onMiddleButtonUp(self, evt):
"""End measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
#print 'release button', 1
evt.Skip()
if self.HasCapture(): self.ReleaseMouse()
FigureCanvasBase.button_release_event(self, x, y, 2, guiEvent=evt)
def _onMouseWheel(self, evt):
"""Translate mouse wheel events into matplotlib events"""
# Determine mouse location
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
# Convert delta/rotation/rate into a floating point step size
delta = evt.GetWheelDelta()
rotation = evt.GetWheelRotation()
rate = evt.GetLinesPerAction()
#print "delta,rotation,rate",delta,rotation,rate
step = rate*float(rotation)/delta
# Done handling event
evt.Skip()
# Mac is giving two events for every wheel event
# Need to skip every second one
if wx.Platform == '__WXMAC__':
if not hasattr(self,'_skipwheelevent'):
self._skipwheelevent = True
elif self._skipwheelevent:
self._skipwheelevent = False
return # Return without processing event
else:
self._skipwheelevent = True
# Convert to mpl event
FigureCanvasBase.scroll_event(self, x, y, step, guiEvent=evt)
def _onMotion(self, evt):
"""Start measuring on an axis."""
x = evt.GetX()
y = self.figure.bbox.height - evt.GetY()
evt.Skip()
FigureCanvasBase.motion_notify_event(self, x, y, guiEvent=evt)
def _onLeave(self, evt):
"""Mouse has left the window."""
evt.Skip()
FigureCanvasBase.leave_notify_event(self, guiEvent = evt)
def _onEnter(self, evt):
"""Mouse has entered the window."""
FigureCanvasBase.enter_notify_event(self, guiEvent = evt)
FigureCanvas = FigureCanvasWx
########################################################################
#
# The following functions and classes are for pylab compatibility
# mode (matplotlib.pylab) and implement figure managers, etc...
#
########################################################################
def _create_wx_app():
"""
Creates a wx.PySimpleApp instance if a wx.App has not been created.
"""
wxapp = wx.GetApp()
if wxapp is None:
wxapp = wx.PySimpleApp()
wxapp.SetExitOnFrameDelete(True)
# retain a reference to the app object so it does not get garbage
# collected and cause segmentation faults
_create_wx_app.theWxApp = wxapp
def draw_if_interactive():
"""
This should be overriden in a windowing environment if drawing
should be done in interactive python mode
"""
DEBUG_MSG("draw_if_interactive()", 1, None)
if matplotlib.is_interactive():
figManager = Gcf.get_active()
if figManager is not None:
figManager.canvas.draw_idle()
class Show(ShowBase):
def mainloop(self):
needmain = not wx.App.IsMainLoopRunning()
if needmain:
wxapp = wx.GetApp()
if wxapp is not None:
wxapp.MainLoop()
show = Show()
def new_figure_manager(num, *args, **kwargs):
"""
Create a new figure manager instance
"""
# in order to expose the Figure constructor to the pylab
# interface we need to create the figure here
DEBUG_MSG("new_figure_manager()", 3, None)
_create_wx_app()
FigureClass = kwargs.pop('FigureClass', Figure)
fig = FigureClass(*args, **kwargs)
return new_figure_manager_given_figure(num, fig)
def new_figure_manager_given_figure(num, figure):
"""
Create a new figure manager instance for the given figure.
"""
fig = figure
frame = FigureFrameWx(num, fig)
figmgr = frame.get_figure_manager()
if matplotlib.is_interactive():
figmgr.frame.Show()
return figmgr
class FigureFrameWx(wx.Frame):
def __init__(self, num, fig):
# On non-Windows platform, explicitly set the position - fix
# positioning bug on some Linux platforms
if wx.Platform == '__WXMSW__':
pos = wx.DefaultPosition
else:
pos =wx.Point(20,20)
l,b,w,h = fig.bbox.bounds
wx.Frame.__init__(self, parent=None, id=-1, pos=pos,
title="Figure %d" % num)
# Frame will be sized later by the Fit method
DEBUG_MSG("__init__()", 1, self)
self.num = num
statbar = StatusBarWx(self)
self.SetStatusBar(statbar)
self.canvas = self.get_canvas(fig)
self.canvas.SetInitialSize(wx.Size(fig.bbox.width, fig.bbox.height))
self.canvas.SetFocus()
self.sizer =wx.BoxSizer(wx.VERTICAL)
self.sizer.Add(self.canvas, 1, wx.TOP | wx.LEFT | wx.EXPAND)
# By adding toolbar in sizer, we are able to put it at the bottom
# of the frame - so appearance is closer to GTK version
self.toolbar = self._get_toolbar(statbar)
if self.toolbar is not None:
self.toolbar.Realize()
if wx.Platform == '__WXMAC__':
# Mac platform (OSX 10.3, MacPython) does not seem to cope with
# having a toolbar in a sizer. This work-around gets the buttons
# back, but at the expense of having the toolbar at the top
self.SetToolBar(self.toolbar)
else:
# On Windows platform, default window size is incorrect, so set
# toolbar width to figure width.
tw, th = self.toolbar.GetSizeTuple()
fw, fh = self.canvas.GetSizeTuple()
# By adding toolbar in sizer, we are able to put it at the bottom
# of the frame - so appearance is closer to GTK version.
# As noted above, doesn't work for Mac.
self.toolbar.SetSize(wx.Size(fw, th))
self.sizer.Add(self.toolbar, 0, wx.LEFT | wx.EXPAND)
self.SetSizer(self.sizer)
self.Fit()
self.canvas.SetMinSize((2, 2))
# give the window a matplotlib icon rather than the stock one.
# This is not currently working on Linux and is untested elsewhere.
#icon_path = os.path.join(matplotlib.rcParams['datapath'],
# 'images', 'matplotlib.png')
#icon = wx.IconFromBitmap(wx.Bitmap(icon_path))
# for xpm type icons try:
#icon = wx.Icon(icon_path, wx.BITMAP_TYPE_XPM)
#self.SetIcon(icon)
self.figmgr = FigureManagerWx(self.canvas, num, self)
bind(self, wx.EVT_CLOSE, self._onClose)
def _get_toolbar(self, statbar):
if rcParams['toolbar']=='classic':
toolbar = NavigationToolbarWx(self.canvas, True)
elif rcParams['toolbar']=='toolbar2':
toolbar = NavigationToolbar2Wx(self.canvas)
toolbar.set_status_bar(statbar)
else:
toolbar = None
return toolbar
def get_canvas(self, fig):
return FigureCanvasWx(self, -1, fig)
def get_figure_manager(self):
DEBUG_MSG("get_figure_manager()", 1, self)
return self.figmgr
def _onClose(self, evt):
DEBUG_MSG("onClose()", 1, self)
self.canvas.close_event()
self.canvas.stop_event_loop()
Gcf.destroy(self.num)
#self.Destroy()
def GetToolBar(self):
"""Override wxFrame::GetToolBar as we don't have managed toolbar"""
return self.toolbar
def Destroy(self, *args, **kwargs):
try:
self.canvas.mpl_disconnect(self.toolbar._idDrag)
# Rationale for line above: see issue 2941338.
except AttributeError:
pass # classic toolbar lacks the attribute
wx.Frame.Destroy(self, *args, **kwargs)
if self.toolbar is not None:
self.toolbar.Destroy()
wxapp = wx.GetApp()
if wxapp:
wxapp.Yield()
return True
class FigureManagerWx(FigureManagerBase):
"""
This class contains the FigureCanvas and GUI frame
It is instantiated by GcfWx whenever a new figure is created. GcfWx is
responsible for managing multiple instances of FigureManagerWx.
public attrs
canvas - a FigureCanvasWx(wx.Panel) instance
window - a wxFrame instance - http://www.lpthe.jussieu.fr/~zeitlin/wxWindows/docs/wxwin_wxframe.html#wxframe
"""
def __init__(self, canvas, num, frame):
DEBUG_MSG("__init__()", 1, self)
FigureManagerBase.__init__(self, canvas, num)
self.frame = frame
self.window = frame
self.tb = frame.GetToolBar()
self.toolbar = self.tb # consistent with other backends
def notify_axes_change(fig):
'this will be called whenever the current axes is changed'
if self.tb != None: self.tb.update()
self.canvas.figure.add_axobserver(notify_axes_change)
def showfig(*args):
frame.Show()
# attach a show method to the figure
self.canvas.figure.show = showfig
def show(self):
self.frame.Show()
def destroy(self, *args):
DEBUG_MSG("destroy()", 1, self)
self.frame.Destroy()
#if self.tb is not None: self.tb.Destroy()
#wx.GetApp().ProcessIdle()
wx.WakeUpIdle()
def get_window_title(self):
return self.window.GetTitle()
def set_window_title(self, title):
self.window.SetTitle(title)
def resize(self, width, height):
'Set the canvas size in pixels'
self.canvas.SetInitialSize(wx.Size(width, height))
self.window.GetSizer().Fit(self.window)
# Identifiers for toolbar controls - images_wx contains bitmaps for the images
# used in the controls. wxWindows does not provide any stock images, so I've
# 'stolen' those from GTK2, and transformed them into the appropriate format.
#import images_wx
_NTB_AXISMENU =wx.NewId()
_NTB_AXISMENU_BUTTON =wx.NewId()
_NTB_X_PAN_LEFT =wx.NewId()
_NTB_X_PAN_RIGHT =wx.NewId()
_NTB_X_ZOOMIN =wx.NewId()
_NTB_X_ZOOMOUT =wx.NewId()
_NTB_Y_PAN_UP =wx.NewId()
_NTB_Y_PAN_DOWN =wx.NewId()
_NTB_Y_ZOOMIN =wx.NewId()
_NTB_Y_ZOOMOUT =wx.NewId()
#_NTB_SUBPLOT =wx.NewId()
_NTB_SAVE =wx.NewId()
_NTB_CLOSE =wx.NewId()
def _load_bitmap(filename):
"""
Load a bitmap file from the backends/images subdirectory in which the
matplotlib library is installed. The filename parameter should not
contain any path information as this is determined automatically.
Returns a wx.Bitmap object
"""
basedir = os.path.join(rcParams['datapath'],'images')
bmpFilename = os.path.normpath(os.path.join(basedir, filename))
if not os.path.exists(bmpFilename):
raise IOError('Could not find bitmap file "%s"; dying'%bmpFilename)
bmp = wx.Bitmap(bmpFilename)
return bmp
class MenuButtonWx(wx.Button):
"""
wxPython does not permit a menu to be incorporated directly into a toolbar.
This class simulates the effect by associating a pop-up menu with a button
in the toolbar, and managing this as though it were a menu.
"""
def __init__(self, parent):
wx.Button.__init__(self, parent, _NTB_AXISMENU_BUTTON, "Axes: ",
style=wx.BU_EXACTFIT)
self._toolbar = parent
self._menu =wx.Menu()
self._axisId = []
# First two menu items never change...
self._allId =wx.NewId()
self._invertId =wx.NewId()
self._menu.Append(self._allId, "All", "Select all axes", False)
self._menu.Append(self._invertId, "Invert", "Invert axes selected", False)
self._menu.AppendSeparator()
bind(self, wx.EVT_BUTTON, self._onMenuButton, id=_NTB_AXISMENU_BUTTON)
bind(self, wx.EVT_MENU, self._handleSelectAllAxes, id=self._allId)
bind(self, wx.EVT_MENU, self._handleInvertAxesSelected, id=self._invertId)
def Destroy(self):
self._menu.Destroy()
self.Destroy()
def _onMenuButton(self, evt):
"""Handle menu button pressed."""
x, y = self.GetPositionTuple()
w, h = self.GetSizeTuple()
self.PopupMenuXY(self._menu, x, y+h-4)
# When menu returned, indicate selection in button
evt.Skip()
def _handleSelectAllAxes(self, evt):
"""Called when the 'select all axes' menu item is selected."""
if len(self._axisId) == 0:
return
for i in range(len(self._axisId)):
self._menu.Check(self._axisId[i], True)
self._toolbar.set_active(self.getActiveAxes())
evt.Skip()
def _handleInvertAxesSelected(self, evt):
"""Called when the invert all menu item is selected"""
if len(self._axisId) == 0: return
for i in range(len(self._axisId)):
if self._menu.IsChecked(self._axisId[i]):
self._menu.Check(self._axisId[i], False)
else:
self._menu.Check(self._axisId[i], True)
self._toolbar.set_active(self.getActiveAxes())
evt.Skip()
def _onMenuItemSelected(self, evt):
"""Called whenever one of the specific axis menu items is selected"""
current = self._menu.IsChecked(evt.GetId())
if current:
new = False
else:
new = True
self._menu.Check(evt.GetId(), new)
# Lines above would be deleted based on svn tracker ID 2841525;
# not clear whether this matters or not.
self._toolbar.set_active(self.getActiveAxes())
evt.Skip()
def updateAxes(self, maxAxis):
"""Ensures that there are entries for max_axis axes in the menu
(selected by default)."""
if maxAxis > len(self._axisId):
for i in range(len(self._axisId) + 1, maxAxis + 1, 1):
menuId =wx.NewId()
self._axisId.append(menuId)
self._menu.Append(menuId, "Axis %d" % i, "Select axis %d" % i, True)
self._menu.Check(menuId, True)
bind(self, wx.EVT_MENU, self._onMenuItemSelected, id=menuId)
elif maxAxis < len(self._axisId):
for menuId in self._axisId[maxAxis:]:
self._menu.Delete(menuId)
self._axisId = self._axisId[:maxAxis]
self._toolbar.set_active(range(maxAxis))
def getActiveAxes(self):
"""Return a list of the selected axes."""
active = []
for i in range(len(self._axisId)):
if self._menu.IsChecked(self._axisId[i]):
active.append(i)
return active
def updateButtonText(self, lst):
"""Update the list of selected axes in the menu button"""
axis_txt = ''
for e in lst:
axis_txt += '%d,' % (e+1)
# remove trailing ',' and add to button string
self.SetLabel("Axes: %s" % axis_txt[:-1])
cursord = {
cursors.MOVE : wx.CURSOR_HAND,
cursors.HAND : wx.CURSOR_HAND,
cursors.POINTER : wx.CURSOR_ARROW,
cursors.SELECT_REGION : wx.CURSOR_CROSS,
}
class SubplotToolWX(wx.Frame):
def __init__(self, targetfig):
wx.Frame.__init__(self, None, -1, "Configure subplots")
toolfig = Figure((6,3))
canvas = FigureCanvasWx(self, -1, toolfig)
# Create a figure manager to manage things
figmgr = FigureManager(canvas, 1, self)
# Now put all into a sizer
sizer = wx.BoxSizer(wx.VERTICAL)
# This way of adding to sizer allows resizing
sizer.Add(canvas, 1, wx.LEFT|wx.TOP|wx.GROW)
self.SetSizer(sizer)
self.Fit()
tool = SubplotTool(targetfig, toolfig)
class NavigationToolbar2Wx(NavigationToolbar2, wx.ToolBar):
def __init__(self, canvas):
wx.ToolBar.__init__(self, canvas.GetParent(), -1)
NavigationToolbar2.__init__(self, canvas)
self.canvas = canvas
self._idle = True
self.statbar = None
def get_canvas(self, frame, fig):
return FigureCanvasWx(frame, -1, fig)
def _init_toolbar(self):
DEBUG_MSG("_init_toolbar", 1, self)
self._parent = self.canvas.GetParent()
self.wx_ids = {}
for text, tooltip_text, image_file, callback in self.toolitems:
if text is None:
self.AddSeparator()
continue
self.wx_ids[text] = wx.NewId()
if text in ['Pan', 'Zoom']:
self.AddCheckTool(self.wx_ids[text], _load_bitmap(image_file + '.png'),
shortHelp=text, longHelp=tooltip_text)
else:
self.AddSimpleTool(self.wx_ids[text], _load_bitmap(image_file + '.png'),
text, tooltip_text)
bind(self, wx.EVT_TOOL, getattr(self, callback), id=self.wx_ids[text])
self.Realize()
def zoom(self, *args):
self.ToggleTool(self.wx_ids['Pan'], False)
NavigationToolbar2.zoom(self, *args)
def pan(self, *args):
self.ToggleTool(self.wx_ids['Zoom'], False)
NavigationToolbar2.pan(self, *args)
def configure_subplots(self, evt):
frame = wx.Frame(None, -1, "Configure subplots")
toolfig = Figure((6,3))
canvas = self.get_canvas(frame, toolfig)
# Create a figure manager to manage things
figmgr = FigureManager(canvas, 1, frame)
# Now put all into a sizer
sizer = wx.BoxSizer(wx.VERTICAL)
# This way of adding to sizer allows resizing
sizer.Add(canvas, 1, wx.LEFT|wx.TOP|wx.GROW)
frame.SetSizer(sizer)
frame.Fit()
tool = SubplotTool(self.canvas.figure, toolfig)
frame.Show()
def save_figure(self, *args):
# Fetch the required filename and file type.
filetypes, exts, filter_index = self.canvas._get_imagesave_wildcards()
default_file = self.canvas.get_default_filename()
dlg = wx.FileDialog(self._parent, "Save to file", "", default_file,
filetypes,
wx.SAVE|wx.OVERWRITE_PROMPT)
dlg.SetFilterIndex(filter_index)
if dlg.ShowModal() == wx.ID_OK:
dirname = dlg.GetDirectory()
filename = dlg.GetFilename()
DEBUG_MSG('Save file dir:%s name:%s' % (dirname, filename), 3, self)
format = exts[dlg.GetFilterIndex()]
basename, ext = os.path.splitext(filename)
if ext.startswith('.'):
ext = ext[1:]
if ext in ('svg', 'pdf', 'ps', 'eps', 'png') and format!=ext:
#looks like they forgot to set the image type drop
#down, going with the extension.
warnings.warn('extension %s did not match the selected image type %s; going with %s'%(ext, format, ext), stacklevel=0)
format = ext
try:
self.canvas.print_figure(
os.path.join(dirname, filename), format=format)
except Exception as e:
error_msg_wx(str(e))
def set_cursor(self, cursor):
cursor =wx.StockCursor(cursord[cursor])
self.canvas.SetCursor( cursor )
def release(self, event):
try: del self.lastrect
except AttributeError: pass
def dynamic_update(self):
d = self._idle
self._idle = False
if d:
self.canvas.draw()
self._idle = True
def draw_rubberband(self, event, x0, y0, x1, y1):
'adapted from http://aspn.activestate.com/ASPN/Cookbook/Python/Recipe/189744'
canvas = self.canvas
dc =wx.ClientDC(canvas)
# Set logical function to XOR for rubberbanding
dc.SetLogicalFunction(wx.XOR)
# Set dc brush and pen
# Here I set brush and pen to white and grey respectively
# You can set it to your own choices
# The brush setting is not really needed since we
# dont do any filling of the dc. It is set just for
# the sake of completion.
wbrush =wx.Brush(wx.Colour(255,255,255), wx.TRANSPARENT)
wpen =wx.Pen(wx.Colour(200, 200, 200), 1, wx.SOLID)
dc.SetBrush(wbrush)
dc.SetPen(wpen)
dc.ResetBoundingBox()
dc.BeginDrawing()
height = self.canvas.figure.bbox.height
y1 = height - y1
y0 = height - y0
if y1<y0: y0, y1 = y1, y0
if x1<y0: x0, x1 = x1, x0
w = x1 - x0
h = y1 - y0
rect = int(x0), int(y0), int(w), int(h)
try: lastrect = self.lastrect
except AttributeError: pass
else: dc.DrawRectangle(*lastrect) #erase last
self.lastrect = rect
dc.DrawRectangle(*rect)
dc.EndDrawing()
def set_status_bar(self, statbar):
self.statbar = statbar
def set_message(self, s):
if self.statbar is not None: self.statbar.set_function(s)
def set_history_buttons(self):
can_backward = (self._views._pos > 0)
can_forward = (self._views._pos < len(self._views._elements) - 1)
self.EnableTool(self.wx_ids['Back'], can_backward)
self.EnableTool(self.wx_ids['Forward'], can_forward)
class NavigationToolbarWx(wx.ToolBar):
def __init__(self, canvas, can_kill=False):
wx.ToolBar.__init__(self, canvas.GetParent(), -1)
DEBUG_MSG("__init__()", 1, self)
self.canvas = canvas
self._lastControl = None
self._mouseOnButton = None
self._parent = canvas.GetParent()
self._NTB_BUTTON_HANDLER = {
_NTB_X_PAN_LEFT : self.panx,
_NTB_X_PAN_RIGHT : self.panx,
_NTB_X_ZOOMIN : self.zoomx,
_NTB_X_ZOOMOUT : self.zoomy,
_NTB_Y_PAN_UP : self.pany,
_NTB_Y_PAN_DOWN : self.pany,
_NTB_Y_ZOOMIN : self.zoomy,
_NTB_Y_ZOOMOUT : self.zoomy }
self._create_menu()
self._create_controls(can_kill)
self.Realize()
def _create_menu(self):
"""
Creates the 'menu' - implemented as a button which opens a
pop-up menu since wxPython does not allow a menu as a control
"""
DEBUG_MSG("_create_menu()", 1, self)
self._menu = MenuButtonWx(self)
self.AddControl(self._menu)
self.AddSeparator()
def _create_controls(self, can_kill):
"""
Creates the button controls, and links them to event handlers
"""
DEBUG_MSG("_create_controls()", 1, self)
# Need the following line as Windows toolbars default to 15x16
self.SetToolBitmapSize(wx.Size(16,16))
self.AddSimpleTool(_NTB_X_PAN_LEFT, _load_bitmap('stock_left.xpm'),
'Left', 'Scroll left')
self.AddSimpleTool(_NTB_X_PAN_RIGHT, _load_bitmap('stock_right.xpm'),
'Right', 'Scroll right')
self.AddSimpleTool(_NTB_X_ZOOMIN, _load_bitmap('stock_zoom-in.xpm'),
'Zoom in', 'Increase X axis magnification')
self.AddSimpleTool(_NTB_X_ZOOMOUT, _load_bitmap('stock_zoom-out.xpm'),
'Zoom out', 'Decrease X axis magnification')
self.AddSeparator()
self.AddSimpleTool(_NTB_Y_PAN_UP,_load_bitmap('stock_up.xpm'),
'Up', 'Scroll up')
self.AddSimpleTool(_NTB_Y_PAN_DOWN, _load_bitmap('stock_down.xpm'),
'Down', 'Scroll down')
self.AddSimpleTool(_NTB_Y_ZOOMIN, _load_bitmap('stock_zoom-in.xpm'),
'Zoom in', 'Increase Y axis magnification')
self.AddSimpleTool(_NTB_Y_ZOOMOUT, _load_bitmap('stock_zoom-out.xpm'),
'Zoom out', 'Decrease Y axis magnification')
self.AddSeparator()
self.AddSimpleTool(_NTB_SAVE, _load_bitmap('stock_save_as.xpm'),
'Save', 'Save plot contents as images')
self.AddSeparator()
bind(self, wx.EVT_TOOL, self._onLeftScroll, id=_NTB_X_PAN_LEFT)
bind(self, wx.EVT_TOOL, self._onRightScroll, id=_NTB_X_PAN_RIGHT)
bind(self, wx.EVT_TOOL, self._onXZoomIn, id=_NTB_X_ZOOMIN)
bind(self, wx.EVT_TOOL, self._onXZoomOut, id=_NTB_X_ZOOMOUT)
bind(self, wx.EVT_TOOL, self._onUpScroll, id=_NTB_Y_PAN_UP)
bind(self, wx.EVT_TOOL, self._onDownScroll, id=_NTB_Y_PAN_DOWN)
bind(self, wx.EVT_TOOL, self._onYZoomIn, id=_NTB_Y_ZOOMIN)
bind(self, wx.EVT_TOOL, self._onYZoomOut, id=_NTB_Y_ZOOMOUT)
bind(self, wx.EVT_TOOL, self._onSave, id=_NTB_SAVE)
bind(self, wx.EVT_TOOL_ENTER, self._onEnterTool, id=self.GetId())
if can_kill:
bind(self, wx.EVT_TOOL, self._onClose, id=_NTB_CLOSE)
bind(self, wx.EVT_MOUSEWHEEL, self._onMouseWheel)
def set_active(self, ind):
"""
ind is a list of index numbers for the axes which are to be made active
"""
DEBUG_MSG("set_active()", 1, self)
self._ind = ind
if ind != None:
self._active = [ self._axes[i] for i in self._ind ]
else:
self._active = []
# Now update button text wit active axes
self._menu.updateButtonText(ind)
def get_last_control(self):
"""Returns the identity of the last toolbar button pressed."""
return self._lastControl
def panx(self, direction):
DEBUG_MSG("panx()", 1, self)
for a in self._active:
a.xaxis.pan(direction)
self.canvas.draw()
self.canvas.Refresh(eraseBackground=False)
def pany(self, direction):
DEBUG_MSG("pany()", 1, self)
for a in self._active:
a.yaxis.pan(direction)
self.canvas.draw()
self.canvas.Refresh(eraseBackground=False)
def zoomx(self, in_out):
DEBUG_MSG("zoomx()", 1, self)
for a in self._active:
a.xaxis.zoom(in_out)
self.canvas.draw()
self.canvas.Refresh(eraseBackground=False)
def zoomy(self, in_out):
DEBUG_MSG("zoomy()", 1, self)
for a in self._active:
a.yaxis.zoom(in_out)
self.canvas.draw()
self.canvas.Refresh(eraseBackground=False)
def update(self):
"""
Update the toolbar menu - called when (e.g.) a new subplot
or axes are added
"""
DEBUG_MSG("update()", 1, self)
self._axes = self.canvas.figure.get_axes()
self._menu.updateAxes(len(self._axes))
def _do_nothing(self, d):
"""A NULL event handler - does nothing whatsoever"""
pass
# Local event handlers - mainly supply parameters to pan/scroll functions
def _onEnterTool(self, evt):
toolId = evt.GetSelection()
try:
self.button_fn = self._NTB_BUTTON_HANDLER[toolId]
except KeyError:
self.button_fn = self._do_nothing
evt.Skip()
def _onLeftScroll(self, evt):
self.panx(-1)
evt.Skip()
def _onRightScroll(self, evt):
self.panx(1)
evt.Skip()
def _onXZoomIn(self, evt):
self.zoomx(1)
evt.Skip()
def _onXZoomOut(self, evt):
self.zoomx(-1)
evt.Skip()
def _onUpScroll(self, evt):
self.pany(1)
evt.Skip()
def _onDownScroll(self, evt):
self.pany(-1)
evt.Skip()
def _onYZoomIn(self, evt):
self.zoomy(1)
evt.Skip()
def _onYZoomOut(self, evt):
self.zoomy(-1)
evt.Skip()
def _onMouseEnterButton(self, button):
self._mouseOnButton = button
def _onMouseLeaveButton(self, button):
if self._mouseOnButton == button:
self._mouseOnButton = None
def _onMouseWheel(self, evt):
if evt.GetWheelRotation() > 0:
direction = 1
else:
direction = -1
self.button_fn(direction)
_onSave = NavigationToolbar2Wx.save_figure
def _onClose(self, evt):
self.GetParent().Destroy()
class StatusBarWx(wx.StatusBar):
"""
A status bar is added to _FigureFrame to allow measurements and the
previously selected scroll function to be displayed as a user
convenience.
"""
def __init__(self, parent):
wx.StatusBar.__init__(self, parent, -1)
self.SetFieldsCount(2)
self.SetStatusText("None", 1)
#self.SetStatusText("Measurement: None", 2)
#self.Reposition()
def set_function(self, string):
self.SetStatusText("%s" % string, 1)
#def set_measurement(self, string):
# self.SetStatusText("Measurement: %s" % string, 2)
#< Additions for printing support: Matt Newville
class PrintoutWx(wx.Printout):
"""Simple wrapper around wx Printout class -- all the real work
here is scaling the matplotlib canvas bitmap to the current
printer's definition.
"""
def __init__(self, canvas, width=5.5,margin=0.5, title='matplotlib'):
wx.Printout.__init__(self,title=title)
self.canvas = canvas
# width, in inches of output figure (approximate)
self.width = width
self.margin = margin
def HasPage(self, page):
#current only supports 1 page print
return page == 1
def GetPageInfo(self):
return (1, 1, 1, 1)
def OnPrintPage(self, page):
self.canvas.draw()
dc = self.GetDC()
(ppw,pph) = self.GetPPIPrinter() # printer's pixels per in
(pgw,pgh) = self.GetPageSizePixels() # page size in pixels
(dcw,dch) = dc.GetSize()
(grw,grh) = self.canvas.GetSizeTuple()
# save current figure dpi resolution and bg color,
# so that we can temporarily set them to the dpi of
# the printer, and the bg color to white
bgcolor = self.canvas.figure.get_facecolor()
fig_dpi = self.canvas.figure.dpi
# draw the bitmap, scaled appropriately
vscale = float(ppw) / fig_dpi
# set figure resolution,bg color for printer
self.canvas.figure.dpi = ppw
self.canvas.figure.set_facecolor('#FFFFFF')
renderer = RendererWx(self.canvas.bitmap, self.canvas.figure.dpi)
self.canvas.figure.draw(renderer)
self.canvas.bitmap.SetWidth( int(self.canvas.bitmap.GetWidth() * vscale))
self.canvas.bitmap.SetHeight( int(self.canvas.bitmap.GetHeight()* vscale))
self.canvas.draw()
# page may need additional scaling on preview
page_scale = 1.0
if self.IsPreview(): page_scale = float(dcw)/pgw
# get margin in pixels = (margin in in) * (pixels/in)
top_margin = int(self.margin * pph * page_scale)
left_margin = int(self.margin * ppw * page_scale)
# set scale so that width of output is self.width inches
# (assuming grw is size of graph in inches....)
user_scale = (self.width * fig_dpi * page_scale)/float(grw)
dc.SetDeviceOrigin(left_margin,top_margin)
dc.SetUserScale(user_scale,user_scale)
# this cute little number avoid API inconsistencies in wx
try:
dc.DrawBitmap(self.canvas.bitmap, 0, 0)
except:
try:
dc.DrawBitmap(self.canvas.bitmap, (0, 0))
except:
pass
# restore original figure resolution
self.canvas.figure.set_facecolor(bgcolor)
self.canvas.figure.dpi = fig_dpi
self.canvas.draw()
return True
#>
########################################################################
#
# Now just provide the standard names that backend.__init__ is expecting
#
########################################################################
Toolbar = NavigationToolbarWx
FigureManager = FigureManagerWx
Jump to Line
Something went wrong with that request. Please try again.