Skip to content
This repository

A benchmark suite for Haskell

tree: cd9ae25043

Fetching latest commit…

Cannot retrieve the latest commit at this time

README.md

Fibon in a Flash

$ git clone git://github.com/dmpots/fibon.git
$ cd fibon
$ git submodule update --init benchmarks
$ cabal configure && cabal build
$ ./dist/build/fibon-run/fibon-run

Introduction

Fibon is a set of tools for running and analyzing benchmark programs in Haskell. Most importantly, it includes an optional set of new benchmarks including many programs taken from the Hackage open source repository.

Fibon is a pure Haskell framework for running and analyzing benchmarks. Cabal is used for building the benchmarks, and the benchmark harness, configuration files, and benchmark descriptions are all written in Haskell. The benchmark descriptions and run configurations are all statically compiled into the benchmark runner to ensure that configuration errors are found at compile time.

The Fibon tools are not tied to any compiler infrastructure and can build benchmarks using any compiler supported by cabal. However, there are some extra features available when using GHC to build the benchmarks:

  • Support in config files for inplace GHC HEAD builds
  • Support in fibon-run for collecting GC stats from GHC compiled programs
  • Support in fibon-analyse for reading GC stats from Fibon result files

Benchmarks

Fibon makes it easy to use either the Fibon benchmarks or your own set of benchmarks. Benchmarks are stored in the benchmarks/Fibon/Benchmarks directory. This directory is setup as a git submodule which means you can easily grab the standard suite or use a suite kept under your own source control.

The default suite of benchmarks is stored in the fibon-benchmarks repository on github.

Benchmark Groups

Benchmarks are named and organized into groups based on the filesystem organization. For example, a benchmark in the directory benchmarks/Fibon/Benchmarks/Hackage/Agum will have the name Agum an be in the benchmark group Hackage.

Executables

The fibon package builds three tools:

  1. fibon-run - runs the benchmarks
  2. fibon-analyze - analyzes the results of a run
  3. fibon-init - utility used when adding new benchmarks

Size and Tune

Fibon benchmarks can be run with two different input sizes: Test and Ref. The Test size is useful to make sure that a benchmark can run successfully, but will not give meaningful timings. The Ref size should be used when reporting results.

Fibon benchmarks can be run under two different tune settings (e.g. compiler optimization settings). The Base and Peak settings can be configured anyway you want to make the desired comparison.

Directory Structure

Source directories

./benchmarks -- benchmark code
./config     -- config files
./lib        -- common files used by several executables
./tools      -- source code for executables

Working directories

./log        -- logging output from benchmark runs
./run        -- working directory for benchmark runs

Getting the Benchmarks

The benchmarks are kept in a separate repository as a git submodule. You can get the Fibon benchmarks by updating the submodule from within your Fibon working directory

$ git submodule update --init benchmarks

This will checkout the benchmarks from the fibon-benchmarks repository and place them in your working copy.

Running Benchmarks

The available benchmarks and configurations are discovered when the Fibon package is configured. Benchmarks are searched for in the benchmarks/Fibon/Benchmarks directory and configuration files are searched for in the config directory. If a configuration file or benchmark is added, you will need to re-run cabal configure to make them available to the fibon-run tool.

Configuration

Fibon comes with a default configuration. The default configuration will run all benchmarks with the Base setting of -O0 and a Peak setting of -O2 on the Ref size. A configuration file can be used to specify more complicated configurations.

You can get some example configuration by doing $ git submodule update --init config

This will checkout a repository of config files. Note that currently these files contain some user and machine-specific configurations, but should be a useful starting point.

You can also command line options to selectively run benchmarks, groups, sizes, and tune settings as described below.

Running

Benchmarks are run with the fibon-run tool. Running fibon-run with no arguments will use the default config file. An alternate config file can be specified with the -c flag. Also, you can give a list of benchmarks or groups to run on the command line. Use --help to see a full list of options.

Running the benchmarks will produce some logging to standard out and create four output files in the log directory.

  1. *.LOG - the full log of the run
  2. *.SUMMARY - the mean runtimes of each benchmark
  3. *.RESULTS - the full results in binary format (pass to fibon-analyse)
  4. *.RESULTS.SHOW - the full results in text format (pass to fibon-analyse)

Analyzing Benchmark Results

Benchmarks can be analyzed by the fibon-analyse tool.

$ fibon-analyse log/000.default.RESULTS

or

$ fibon-analyse log/000.default.RESULTS.SHOW

The binary results (.RESULT) file is much faster to parse. It contains a serialization of a list of FibonResult structures. The .SHOW file contains a FibonResult on each line which can be parsed by using the read function.

Adding New Benchmarks

New benchmarks are added by putting the appropriate files in the benchmarks/Fibon/Benchmarks directory. Each folder in this directory represents a benchmark group. The benchmarks and groups are found at configuration time (i.e. when running cabal configure for the fibon package). You can exclude a benchmark or a group by prefixing the name with and underscore (_).

To add a new benchmark create a new folder in a benchmark group. If the benchmark program has been cabalized, you can typically just do a cabal unpack of the benchmark. The benchmark folder must contain:

  1. A cabal file describing how to build the benchmark
  2. A benchmark description for Fibon stored in Fibon/Instance.hs

The fibon-init tool will read a cabal file from the current directory and generate the Fibon subfolder and a stub Instance.hs file.

The Fibon subfolder of a benchmark contains all of the data that Fibon needs to build and execute the benchmark. The benchmark instance file describes any requried build flags, inputs, and outputs for the benchmark. It is a standard Haskell module that must export the mkInstance function. The mkInstance function takes a benchmark size and returns a BenchmarkInstance structure. An example instance file is show below.

module Fibon.Benchmarks.Hackage.Bzlib.Fibon.Instance(
  mkInstance
)
where
import Fibon.BenchmarkInstance

sharedConfig = BenchmarkInstance {
    flagConfig = FlagConfig {
        configureFlags = []
      , buildFlags     = []
      , runFlags       = []
      }
    , stdinInput     = Nothing
    , output         = []
    , exeName        = "hsbzip"
  }
flgCfg = flagConfig sharedConfig

mkInstance Test = sharedConfig {
      flagConfig = flgCfg {
          runFlags = ["bzlib.cabal.bz2"]
      }
      , output    = [(OutputFile "bzlib.cabal.bz2.roundtrip",
                      Diff       "bzlib.cabal.bz2")]
    }
mkInstance Ref  = sharedConfig {
      flagConfig = flgCfg {
          runFlags = ["mito.aa.bz2"]
      }
      , output   = [(OutputFile "mito.aa.bz2.roundtrip",
                     Diff       "mito.aa.bz2")]
    }

The input and expected output data should also be stored in the Fibon subdirectory of the benchmark. When the benchmark is run, the contents of the input and output directories for the benchmark size will be copied to the working directory where the benchmark is run. There can also be an all directory which whose data will be copied for all input sizes. None of the data directories are required, but if they exist they must be organized like this:

    data/all/input
    data/all/output
    data/ref/input
    data/ref/output
    data/test/input
    data/test/output

Benchmark Notes

Ghc612 The Repa and Dph groups will not work properly.

Ghc610 The Repa and Dph groups will not work properly.

ChameneosRedux Does not work with -O0. Gets "thread blocked indefinitely" exception

Mandelbrot The Test size gives different result, but the Ref size is ok. Think it is just some kind of floating point wibbles.

Something went wrong with that request. Please try again.