Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

1226 lines (1029 sloc) 37.668 kb
# -*-makefile-*-
# @configure_input@
#
################################################################################
#
# config.mk.in
#
# This file supplies defaults for many tweakable build configuration
# options. Some of the defaults are filled in by the autoconf-generated
# configure script.
#
# DO NOT EDIT THIS FILE!
#
# - config.mk is auto-generated from config.mk.in by configure.
# This may be triggered automatically by the build system (say
# if config.mk.in has changed more recently than config.mk),
# so if you edit config.mk your changes will be spammed.
#
# - Settings in this file may be overriden by giving replacement
# definitions in build.mk. See build.mk.sample for a good
# starting point for a build.mk file.
#
# If you don't have a build.mk file then you get defaults for everything.
# The defaults should provide a reasonable vanilla build.
#
# This is one of only two files that configure generates (the other is config.h)
#
ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
$(error GNU make version 3.79.1 or later is required.)
endif
endif
################################################################################
#
# GHC Version
#
# ProjectVersion is treated as a *string*
# ProjectVersionInt is treated as an *integer* (for cpp defines)
# Versioning scheme: A.B.C
# A: major version, decimal, any number of digits
# B: minor version, decimal, any number of digits
# C: patchlevel, one digit, omitted if zero.
#
# ProjectVersionInt does *not* contain the patchlevel (rationale: this
# figure is used for conditional compilations, and library interfaces
# etc. are not supposed to change between patchlevels).
#
# The ProjectVersionInt is included in interface files, and GHC
# checks that it's reading interface generated by the same ProjectVersion
# as itself. It does this even though interface file syntax may not
# change between versions. Rationale: calling conventions or other
# random .o-file stuff might change even if the .hi syntax doesn't
ProjectName = @ProjectName@
ProjectVersion = @ProjectVersion@
ProjectVersionInt = @ProjectVersionInt@
ProjectPatchLevel = @ProjectPatchLevel@
################################################################################
#
# Platform variables
#
################################################################################
# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
# specifier. E.g. sparc-sun-solaris2
#
# Build platform: the platform on which we are doing this build
# Host platform: the platform on which these binaries will run
# Target platform: the platform for which this compiler will generate code
#
# We don't support build & host being different, because the build
# process creates binaries that are run during the build, and also
# installed.
#
# If host & target are different, then we are building a compiler
# which will generate intermediate .hc files to port to the target
# architecture for bootstrapping. The libraries and stage 2 compiler
# will be built as HC files for the target system, and likely won't
# build on this host platform.
#
# An important invariant is that for any piece of source code, the
# platform on which the code is going to run is the HOST platform,
# and the platform on which we are building is the BUILD platform.
# Additionally for the compiler, the platform this compiler will
# generate code for is the TARGET. TARGET is not meaningful outside
# the compiler sources.
#
# Guidelines for when to use HOST vs. TARGET:
#
# - In the build system (Makefile, foo.mk), normally we should test
# $(HOSTPLATFORM). There are some cases (eg. installation), where
# we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
# doesn't matter which is used.
#
# - In the compiler itself, we should test HOST or TARGET depending
# on whether the conditional relates to the code being generated, or
# the platform on which the compiler is running. See the section
# on "Coding Style" in the commentary for more details.
#
# - In all other code, we should be testing HOST only.
#
# NOTE: cross-compiling is not well supported by the build system.
# You have to do a lot of work by hand to cross compile: see the
# section on "Porting GHC" in the Building Guide.
HOSTPLATFORM = @HostPlatform@
TARGETPLATFORM = @TargetPlatform@
BUILDPLATFORM = @BuildPlatform@
# Hack alert:
# in one or two places, we need to get at the OS version (major and
# perhaps even minor), HostOS_Full is the OS name reported by
# AC_CANONICAL_SYSTEM.
#
HostPlatform_CPP = @HostPlatform_CPP@
HostArch_CPP = @HostArch_CPP@
HostOS_CPP = @HostOS_CPP@
HostOS_Full = @HostOS_Full@
HostVendor_CPP = @HostVendor_CPP@
TargetPlatform_CPP = @TargetPlatform_CPP@
TargetArch_CPP = @TargetArch_CPP@
TargetOS_CPP = @TargetOS_CPP@
TargetVendor_CPP = @TargetVendor_CPP@
BuildPlatform_CPP = @BuildPlatform_CPP@
BuildArch_CPP = @BuildArch_CPP@
BuildOS_CPP = @BuildOS_CPP@
BuildVendor_CPP = @BuildVendor_CPP@
@HostPlatform_CPP@_HOST = 1
@TargetPlatform_CPP@_TARGET = 1
@BuildPlatform_CPP@_BUILD = 1
@HostArch_CPP@_HOST_ARCH = 1
@TargetArch_CPP@_TARGET_ARCH = 1
@BuildArch_CPP@_BUILD_ARCH = 1
@HostOS_CPP@_HOST_OS = 1
@TargetOS_CPP@_TARGET_OS = 1
@BuildOS_CPP@_BUILD_OS = 1
@HostVendor_CPP@_HOST_VENDOR = 1
@TargetVendor_CPP@_TARGET_VENDOR = 1
@BuildVendor_CPP@_BUILD_VENDOR = 1
################################################################################
#
# Global configuration options
#
################################################################################
# Leading underscores on symbol names in object files
# Valid options: YES/NO
#
LeadingUnderscore=@LeadingUnderscore@
# Pin a suffix on executables? If so, what (Windows only).
exeext=@exeext@
# Windows=YES if on a Windows platform
ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
Windows=YES
else
Windows=NO
endif
# BootingFromHc - build GHC and the libraries from .hc files?
BootingFromHc = @BootingFromHc@
# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
# rather than registerised code, i.e., disable the mangler?
BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
#
# Which ways should DocBook XML documents be built?
# options are: dvi ps pdf html chm HxS
#
XMLDocWays=
################################################################################
#
# Variables that control how the compiler itself is built
#
################################################################################
# The compiler used to build GHC is $(GHC). To change the actual compiler
# used, re-configure with --with-ghc=<path-to-ghc>.
# Extra ways in which to build the compiler (for example, you might want to
# build a profiled compiler so you can see where it spends its time)
GhcCompilerWays=
# Extra option flags to pass to the compiler that compiles the compiler
# (Ones that are essential are wired into compiler/Makefile)
# Typical options to use here:
#
# -DDEBUG include debugging code and assertions (will make the
# compiler slower and produce debugging output, but useful
# for development)
#
# -dcore-lint check the types after every pass of the compiler;
# a pretty strong internal check of the compiler being
# used to compile GHC. Useful when bootstrapping.
GhcHcOpts=-Rghc-timing
# Extra options added to specific stages of the compiler bootstrap.
# These are placed later on the command line, and may therefore
# override options from $(GhcHcOpts).
GhcStage1HcOpts=
GhcStage2HcOpts=
GhcStage3HcOpts=
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
# run without any support for architecture-specific assembly mangling,
# register assignment or tail-calls, and is therefore a good way to get
# started when porting GHC to new architectures.
#
# If this is set to NO, you can still use the unregisterised way
# (way 'u') to get unregisterised code, but the default way will be
# registerised.
#
# NOTE: the stage1 compiler will be a registerised binary (assuming
# the compiler you build with is generating registerised binaries), but
# the stage2 compiler will be an unregisterised binary.
#
ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
GhcUnregisterised=YES
else
GhcUnregisterised=NO
endif
# Build a compiler with a native code generator backend
# (as well as a C backend)
#
# Target platforms supported:
# i386, powerpc
# sparc has bitrotted
# AIX is not supported
ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
ifeq "$(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)" "YESYESNO"
GhcWithNativeCodeGen=YES
else
GhcWithNativeCodeGen=NO
endif
# Include support for generating Java
GhcWithJavaGen=NO
HaveLibDL = @HaveLibDL@
# ArchSupportsSMP should be set iff there is support for that arch in
# includes/SMP.h
ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
ifeq "$(ArchSupportsSMP)$(GhcUnregisterised)" "YESNO"
GhcWithSMP=YES
else
GhcWithSMP=NO
endif
# Whether to include GHCi in the compiler. Depends on whether the RTS linker
# has support for this OS/ARCH combination.
OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
GhcWithInterpreter=YES
else
GhcWithInterpreter=NO
endif
# GhcEnableTablesNextToCode tells us whether the target architecture
# supports placing info tables directly before the entry code
# (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
# TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
# code or not, which may be decided by options to the compiler later.
ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
GhcEnableTablesNextToCode=NO
else
GhcEnableTablesNextToCode=YES
endif
#
# Building various ways?
# (right now, empty if not).
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
# Interface file version (hi-boot files only)
#
# A GHC built with HscIfaceFileVersion=n will look for
# M.hi-boot-n, and only then for
# M.hi-boot.
# (It'll be happy with the latter if the former doesn't exist.)
#
#
# This variable is used ONLY for hi-boot files. Its only purpose is
# to allow you to have a single directory with multiple .hi-boot files
# for the same module, each corresponding to a different version of
# GHC.
#
# HscIfaceFileVersion is propagated to hsc via
# compiler/main/Config.hs, which is automatically generated by
# compiler/Makefile.
HscIfaceFileVersion=6
#------------------------------------------------------------------------------
# Options for Libraries
# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries.
# When booting from .hc files, turn this off.
ifeq "$(BootingFromHc)" "YES"
GhcLibWays=
else
GhcLibWays=p
endif
# In addition, the RTS is built in some further variations. Ways that
# make sense here:
#
# thr : threaded
# thr_p : threaded profiled
# debug : debugging (compile with -g for the C compiler, and -DDEBUG)
# debug_p : debugging profiled
# debug_u : debugging unregisterised
# thr_debug : debugging threaded
# thr_debug_p : debugging threaded profiled
#
ifeq "$(BootingFromHc)" "YES"
GhcRTSWays=
else
GhcRTSWays=thr thr_p debug thr_debug
endif
# Option flags to pass to GHC when it's compiling modules in
# fptools/libraries. Typically these are things like -O or
# -dcore-lint or -H32m. The ones that are *essential* are wired into
# the build system.
#
# -O is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
#
# -fgenerics switches on generation of support code for
# derivable type classes. This is now off by default,
# but we switch it on for the libraries so that we generate
# the code in case someone importing wants it
GhcLibHcOpts=-O -Rghc-timing -fgenerics
# Win32 only: Enable the RTS and libraries to be built as DLLs
DLLized=@EnableWin32DLLs@
# Strip local symbols from libraries? This can make the libraries smaller,
# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
StripLibraries=NO
# These are the URL patterns that Haddock uses to generate the "Source
# File" links on each page.
CorePackageSourceURL = http://darcs.haskell.org/ghc-6.6/packages/$(PACKAGE)/%{FILE}
ExtraPackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
# These are the packages required to be present in order to bootstrap GHC
# NB. must be synced with libraries/core-packages
CorePackages = base Cabal haskell98 readline regex-base regex-compat \
regex-posix parsec stm template-haskell unix Win32
# ----------------------------------------------------------------------------
# Object-file splitting
#
# Set SplitObjs=YES or NO in your build.mk
#
# Don't use -split-objs in in GhcLibHcOpts, because the build
# system needs to do other special magic if you are
# doing object-file splitting
ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" ""
SplitObjs=YES
else
SplitObjs=NO
endif
# Don't split object files for libs if we're building DLLs, or booting from
# .hc files.
ifeq "$(DLLized)" "YES"
SplitObjs=NO
endif
ifeq "$(BootingFromHc)" "YES"
SplitObjs=NO
endif
ifeq "$(GhcUnregisterised)" "YES"
SplitObjs=NO
endif
ifeq "$(TargetArch_CPP)" "ia64"
SplitObjs=NO
endif
# Math library
LIBM=@LIBM@
# Build the ObjectIO ?
#
GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
# .NET interop support?
#
DotnetSupport=@DotnetSupport@
# Build unix package?
#
GhcLibsWithUnix=@GhcLibsWithUnix@
# ----------------------------------------------------------------------------
# Options for GHC's RTS
# For an optimised RTS (you probably don't want to change these; we build
# a debugging RTS by default now. Use -debug to get it).
GhcRtsHcOpts=-optc-O2
GhcRtsCcOpts=-fomit-frame-pointer
# Include the front panel code? Needs GTK+.
GhcRtsWithFrontPanel = NO
# Include support for CPU performance counters via the PAPI library in the RTS?
# (PAPI: http://icl.cs.utk.edu/papi/)
GhcRtsWithPapi = NO
HavePapi = @HavePapi@
################################################################################
#
# nofib
#
# nofib specific options
#
################################################################################
WithNofibHc = $(GHC_INPLACE)
# NoFibSubDirs controls which set of tests should be run
# You can run one or more of
# imaginary
# spectral
# real
# parallel
# PRIVATE
# PENDING
# UNUSED
NoFibSubDirs = imaginary spectral real
# The different ways to build nofib. Default is just to mirror
# what is done for the ghc prelude libraries.
#
NoFibWays = $(GhcLibWays)
# Haskell compiler options for nofib
NoFibHcOpts = -O
# Number of times to run each program
NoFibRuns = 5
################################################################################
#
# Paths (see paths.mk)
#
################################################################################
# Directory used by GHC (and possibly other tools) for storing
# temporary files. If your TMPDIR isn't big enough, either override
# this in build.mk or set your environment variable "TMPDIR" to point
# to somewhere with more space. (TMPDIR=. is a good choice).
# DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
# override an environment variable with the value of the make variable
# of the same name (if it exists) when executing sub-processes, so
# setting the TMPDIR env var would have no effect in the build tree.
DEFAULT_TMPDIR = /tmp
ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
DEFAULT_TMPDIR = /C/TEMP
endif
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
DEFAULT_TMPDIR = /C/TEMP
endif
# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
FPTOOLS_TOP_ABS = @hardtop@
# The platform specific version of 'hardtop'.
FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
#
# Installation directories, we don't use half of these,
# but since the configure script has them on offer while
# passing through, we might as well set them.
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
datadir0 = @datadir@
libdir0 = @libdir@
includedir = @includedir@
oldincludedir = @oldincludedir@
mandir = @mandir@
ifeq "$(Windows)" "YES"
ifeq "$(strip $(prefix))" ""
prefix = /c/ghc
endif
# Hack: our directory layouts tend to be different on Windows, so
# hack around configure's bogus assumptions here.
datadir = $(prefix)
libdir = $(prefix)
else
#
# Unix: override libdir and datadir to put ghc-specific stuff in
# a subdirectory with the version number included.
#
libdir = $(libdir0)/ghc-$(ProjectVersion)
datadir = $(datadir0)/ghc-$(ProjectVersion)
endif # Windows
# Default place for putting interface files is $(libdir)
# (overriden for packages in package.mk)
ifacedir = $(libdir)
#
# Default values for most of the above are only set if
# they weren't configured to anything in particular
# via the configure script. (i.e., we make no assumption
# that the autoconf-generated script will assign defaults
# to all of the above).
#
ifeq "$(strip $(exec_prefix))" ""
exec_prefix = $(prefix)
endif
ifeq "$(strip $(bindir))" ""
bindir = $(exec_prefix)/bin
endif
#
# NOTE: by intention, libexecdir and libdir point to
# the same place.
# => Only way to override this is to set libexecdir= on the command line.
# (NOTE: configure script setting is ignored).
libexecdir = $(libdir)
ifeq "$(strip $(datadir))" ""
datadir = $(prefix)/share
endif
ifeq "$(strip $(libdir))" ""
libdir = $(exec_prefix)/lib
endif
ifeq "$(strip $(includedir))" ""
includedir = $(prefix)/include
endif
ifeq "$(strip $(oldincludedir))" ""
oldincludedir = /usr/include
endif
ifeq "$(strip $(mandir))" ""
mandir = $(prefix)/man
endif
#-----------------------------------------------------------------------------
# install configuration
#
# Set this to have files installed with a specific owner
#
INSTALL_OWNER =
#
# Set this to have files installed with a specific group
#
INSTALL_GROUP =
#
# Invocations of `install' for the four different classes
# of targets:
#
INSTALL_PROGRAM = $(INSTALL) -m 755
INSTALL_SCRIPT = $(INSTALL) -m 755
INSTALL_SHLIB = $(INSTALL) -m 755
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_MAN = $(INSTALL) -m 644
INSTALL_DIR = $(MKDIRHIER)
# -----------------------------------------------------------------------------
# Utilities programs: flags
# If you want to give any standard flags to pretty much any utility
# (see utils.mk for a complete list), by adding a line here
#
# SRC_P_OPTS += ...
#
# where P is the utility. For example, to add -O to all Haskell
# compilations,
#
# SRC_HC_OPTS += -O
SRC_HC_OPTS += -H16m -O
# These flags make flex 8-bit
SRC_FLEX_OPTS += -8
SRC_INSTALL_BIN_OPTS += -s
# lint gets all CPP's flags too
SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
# Default fptools options for dllwrap.
SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
# Flags for CPP when running GreenCard on .pgc files
GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
################################################################################
#
# Layout of the source tree
#
################################################################################
# Here we provide defines for the various directories in the source tree,
# so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
# indicates a directory relative to the top of the source tree, whereas
# $(GHC_FOO_DIR) is a directory relative to the current directory.
# $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
GHC_UTILS_DIR_REL = utils
GHC_INCLUDE_DIR_REL = includes
GHC_COMPILER_DIR_REL = compiler
GHC_RTS_DIR_REL = rts
GHC_UTILS_DIR_REL = utils
GHC_DRIVER_DIR_REL = driver
GHC_COMPAT_DIR_REL = compat
GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
GHC_HSC2HS_DIR = $(FPTOOLS_TOP)/$(GHC_HSC2HS_DIR_REL)
GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
# -----------------------------------------------------------------------------
# Names of programs in the GHC tree
#
# xxx_PGM the name of an executable, without the path
# xxx the executable relative to the current dir
GHC_UNLIT_PGM = unlit$(exeext)
GHC_HP2PS_PGM = hp2ps
GHC_HSTAGS_PGM = hasktags
GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace
GHC_TOUCHY_PGM = touchy$(exeext)
GHC_MANGLER_PGM = ghc-asm
GHC_SPLIT_PGM = ghc-split
GHC_SYSMAN_PGM = SysMan
GHC_PKG_INPLACE_PGM = ghc-pkg-inplace
GHC_GENPRIMOP_PGM = genprimopcode
GHC_GENAPPLY_PGM = genapply
GHC_MKDEPENDC_PGM = mkdependC
GHC_LTX_PGM = ltx
GHC_MKDIRHIER_PGM = mkdirhier
GHC_LNDIR_PGM = lndir
GHC_RUNTEST_PGM = runstdtest
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
GHC_CP = "xcopy /y"
GHC_PERL = perl
else
GHC_CP = $(CP)
GHC_PERL = $(PERL)
endif
UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM)
MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
GHC_PKG_INPLACE = $(GHC_PKG_DIR)/$(GHC_PKG_INPLACE_PGM)
GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
#-----------------------------------------------------------------------------
# Haskell compilers and mkdependHS
# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
# compilers, if available.
#
# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
#
# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
# (because the version numbers have to be calculated).
GHC = @WithGhc@
GhcDir = $(dir $(GHC))
# Set to YES if $(GHC) has the readline package installed
GhcHasReadline = @GhcHasReadline@
HBC = @HBC@
NHC = @NHC@
# Sometimes we want to invoke ghc from the build tree in different
# places (eg. it's handy to have a nofib & a ghc build in the same
# tree). We can refer to "this ghc" as $(GHC_INPLACE):
GHC_INPLACE = $(GHC_COMPILER_DIR)/ghc-inplace
GHC_STAGE1 = $(GHC_COMPILER_DIR)/stage1/ghc-inplace
GHC_STAGE2 = $(GHC_COMPILER_DIR)/stage2/ghc-inplace
GHC_STAGE3 = $(GHC_COMPILER_DIR)/stage3/ghc-inplace
ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
# We are using the stage1 compiler to compile Haskell code, set up
# some variables appropriately:
HC =$(GHC_STAGE1)
MKDEPENDHS =$(GHC_STAGE1)
GhcVersion = @ProjectVersion@
GhcPatchLevel = @ProjectPatchLevel@
# oops, these are wrong:
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
ghc_ge_504 = YES
ghc_ge_601 = YES
ghc_ge_602 = YES
ghc_ge_603 = YES
ghc_ge_605 = YES
else # not UseStage1 or BootingFromHc
HC = @WithHc@
MKDEPENDHS = $(GHC)
GhcVersion = @GhcVersion@
GhcPatchLevel = @GhcPatchLevel@
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
# Some useful GHC version predicates:
ghc_ge_504 = $(shell if (test $(GhcCanonVersion) -ge 504); then echo YES; else echo NO; fi)
ghc_ge_601 = $(shell if (test $(GhcCanonVersion) -ge 601); then echo YES; else echo NO; fi)
ghc_ge_602 = $(shell if (test $(GhcCanonVersion) -ge 602); then echo YES; else echo NO; fi)
ghc_ge_603 = $(shell if (test $(GhcCanonVersion) -ge 603); then echo YES; else echo NO; fi)
ghc_ge_605 = $(shell if (test $(GhcCanonVersion) -ge 605); then echo YES; else echo NO; fi)
endif
# Canonicalised ghc version number, used for easy (integer) version
# comparisons. We must expand $(GhcMinVersion) to two digits by
# adding a leading zero if necessary:
ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
else
GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
endif
#-----------------------------------------------------------------------------
# C compiler
#
# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
# the flag --with-gcc=<blah> instead. The reason is that the configure script
# needs to know which gcc you're using in order to perform its tests.
HaveGcc = @HaveGcc@
UseGcc = YES
WhatGccIsCalled = @WhatGccIsCalled@
GccVersion = @GccVersion@
ifeq "$(strip $(HaveGcc))" "YES"
ifneq "$(strip $(UseGcc))" "YES"
CC = cc
else
CC = $(WhatGccIsCalled)
GccDir = $(dir $(WhatGccIsCalled))
endif
endif
# default C compiler flags
SRC_CC_OPTS = @SRC_CC_OPTS@
ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
SRC_CC_OPTS += -G0
endif
#-----------------------------------------------------------------------------
# GMP Library (version 2.0.x or above)
#
HaveLibGmp = @HaveLibGmp@
LibGmp = @LibGmp@
#-----------------------------------------------------------------------------
# GMP framework (Mac OS X)
#
HaveFrameworkGMP = @HaveFrameworkGMP@
#-----------------------------------------------------------------------------
# Mingwex Library
#
HaveLibMingwEx = @HaveLibMingwEx@
#-----------------------------------------------------------------------------
# Flex (currently unused, could be moved to glafp-utils)
# FLEX = @LEX@
# Don't bother with -lfl, we define our own yywrap()s anyway.
# FLEX_LIB =
#WAS:FLEX_LIB = @LEXLIB@
#-----------------------------------------------------------------------------
# Other standard (ha!) Unix utilities
AR = @ArCmd@
ArSupportsInput = @ArSupportsInput@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
CONTEXT_DIFF = @ContextDiffCmd@
CP = cp
CPP = @CPP@ @CPPFLAGS@
CTAGS = $(ETAGS)
#
# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
# behave plausibly on Haskell sources.
#
RAWCPP_FLAGS = -undef -traditional
FIND = @FindCmd@
SORT = @SortCmd@
INSTALL = @INSTALL@
#
# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
# install-sh script (if chosen). This not terribly useful to us, so we convert
# it into an abs. path.
#
INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
LATEX = latex
HEVEA = hevea
HACHA = hacha
LN_S = @LN_S@
MANMACROS = -man
MSMACROS = -ms
MV = mv
NROFF = nroff
PERL = @PerlCmd@
PYTHON = @PythonCmd@
PIC = pic
PREPROCESSCMD = $(CC) -E
RANLIB = @RANLIB@
RM = rm -f
SED = @SedCmd@
SHELL = /bin/sh
LD = @LdCmd@
# Some ld's support the -x flag and some don't, so the configure
# script detects which we have and sets LdXFlag to "-x" or ""
# respectively.
LD_X = @LdXFlag@
# GNU ld supports input via a linker script, which is useful to avoid
# overflowing command-line length limits.
LdIsGNULd = @LdIsGNULd@
#
# In emergency situations, REAL_SHELL is used to perform shell commands
# from within the ghc driver script, by scribbling the command line to
# a temp file and then having $(REAL_SHELL) execute it.
#
# The reason for having to do this is that overly long command lines
# cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
# 2.5.1), which is why this backdoor is provided. The situation of overly
# long command lines is either encountered while doing `make boot' in compiler/,
# or when linking the compiler binary (`hsc').
#
# We do not use SHELL to execute long commands, as `make' will more than likely
# override whatever setting you have in your environment while executing.
# By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
# as it is SHELL that will show up the bogosity in the first place, but setting
# it to anything else isn't really portable.
#
# ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
# with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
# command shell.
#
REAL_SHELL=$(SHELL)
SIZE = size
STRIP = strip
TAR = @TarCmd@
ZIP = zip
#
# This is special to literate/, ToDo: add literate-specific
# configure setup to literate/.
#
TBL = tbl
TEX = tex
TGRIND = tgrind
TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
TIB = tib
TIME = @TimeCmd@
TROFF = troff
UNAME = uname
# GTK+
GTK_CONFIG = @GTK_CONFIG@
#-----------------------------------------------------------------------------
# DocBook XML stuff
XSLTPROC = @XsltprocCmd@
XMLLINT = @XmllintCmd@
FOP = @FopCmd@
XMLTEX = @XmltexCmd@
PDFXMLTEX = @PdfxmltexCmd@
DVIPS = @DvipsCmd@
DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
--stringparam section.autolabel 1 \
--stringparam section.label.includes.component.label 1
#-----------------------------------------------------------------------------
# FPtools support software
BLD_DLL = dllwrap
#
# .NET support software
#
ILX2IL = ilx2il
ILASM = ilasm
#
# ghc-pkg
#
GHC_PKG = @GhcPkgCmd@
#
# GreenCard
#
GREENCARD = @GreenCardCmd@
GREENCARD_VERSION = @GreenCardVersion@
#
# Happy
#
HAPPY = @HappyCmd@
HAPPY_VERSION = @HappyVersion@
#
# Options to pass to Happy when we're going to compile the output with GHC
#
GHC_HAPPY_OPTS = -agc
# Temp. to work around performance problems in the HEAD around 8/12/2003,
# A Happy compiled with this compiler needs more stack.
SRC_HAPPY_OPTS = +RTS -K2m -RTS
#
# Alex
#
ALEX = @AlexCmd@
ALEX_VERSION = @AlexVersion@
#
# Options to pass to Happy when we're going to compile the output with GHC
#
GHC_ALEX_OPTS = -g
#
# Haddock
#
HADDOCK = @HaddockCmd@
#
# Options for compiling in different `ways'.
#
# To configure up your own way, have a look at some of the standard ways
# such as profiling, and create your own set of WAY_*_OPTS defs below.
# After having done that, add your way string to WAYS, and after having
# run the configure script, the different projects will add the new way
# to the list of ways they support.
#
#
# Definitions of the different ways:
#
# * their name:
# - tag, e.g., p
# - description, e.g., profiling
# * what they mean to the driver:
# - WAY_p_HC_OPTS gives the list of command-line options
# to the driver.
#
#
# The ways currently defined.
#
ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
USER_WAYS=a b c d e f g h j k l m n o A B
#
# The following ways currently have treated specially, p u t mg,
# as the driver script treats these guys specially and needs to carefully be told
# about the options for these. Hence, we hide the required command line options
# for these in the driver, as this is the only place they are needed.
#
# If you want to add to these default options, fill in the variables below:
# Way 'i':
WAY_i_NAME=ILX
WAY_i_HC_OPTS= -filx -fruntime-types
# Way 'p':
WAY_p_NAME=profiling
WAY_p_HC_OPTS= -prof
# Way 't':
WAY_t_NAME=ticky-ticky profiling
WAY_t_HC_OPTS= -ticky
# Way `u':
WAY_u_NAME=unregisterized (using portable C only)
WAY_u_HC_OPTS=-unreg
# Way `mp':
WAY_mp_NAME=parallel
WAY_mp_HC_OPTS=-parallel
# Way `mg':
WAY_mg_NAME=GranSim
WAY_mg_HC_OPTS=-gransim
#
# These ways apply to the RTS only:
#
# Way 'thr':
WAY_thr_NAME=threaded
WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
# Way 'thr_p':
WAY_thr_p_NAME=threaded profiled
WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
# Way 'debug':
WAY_debug_NAME=debug
WAY_debug_HC_OPTS=-optc-DDEBUG
# Way 'debug_p':
WAY_debug_p_NAME=debug profiled
WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
# Way 'debug_u':
WAY_debug_u_NAME=debug unregisterised
WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
# Way 'thr_debug':
WAY_thr_debug_NAME=threaded
WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
# Way 'thr_debug_p':
WAY_thr_debug_p_NAME=threaded
WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
#
# Add user-way configurations here:
#
WAY_A_NAME=
WAY_A_HC_OPTS=
WAY_B_NAME=
WAY_B_HC_OPTS=
WAY_a_NAME=
WAY_a_HC_OPTS=
WAY_b_NAME=
WAY_b_HC_OPTS=
WAY_c_NAME=
WAY_c_HC_OPTS=
WAY_d_NAME=
WAY_d_HC_OPTS=
WAY_e_NAME=
WAY_e_HC_OPTS=
WAY_f_NAME=
WAY_f_HC_OPTS=
WAY_g_NAME=
WAY_g_HC_OPTS=
WAY_h_NAME=
WAY_h_HC_OPTS=
WAY_j_NAME=
WAY_j_HC_OPTS=
WAY_k_NAME=
WAY_k_HC_OPTS=
WAY_l_NAME=
WAY_l_HC_OPTS=
WAY_m_NAME=
WAY_m_HC_OPTS=
WAY_n_NAME=
WAY_n_HC_OPTS=
WAY_o_NAME=
WAY_o_HC_OPTS=
################################################################################
#
# 31-bit-Int Core files
#
################################################################################
#
# It is possible to configure the compiler and prelude to support 31-bit
# integers, suitable for a back-end and RTS using a tag bit on a 32-bit
# architecture. Currently the only useful output from this option is external Core
# files. The following additions to your build.mk will produce the
# 31-bit core output. Note that this is *not* just a library "way"; the
# compiler must be built a special way too.
# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
# SplitObjs=NO
Jump to Line
Something went wrong with that request. Please try again.