Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

1169 lines (976 sloc) 33.836 kB
# -*-makefile-*-
# @configure_input@
#
################################################################################
#
# config.mk.in
#
# This file supplies defaults for many tweakable build configuration
# options. Some of the defaults are filled in by the autoconf-generated
# configure script.
#
# DO NOT EDIT THIS FILE!
#
# - config.mk is auto-generated from config.mk.in by configure.
# This may be triggered automatically by the build system (say
# if config.mk.in has changed more recently than config.mk),
# so if you edit config.mk your changes will be spammed.
#
# - Settings in this file may be overriden by giving replacement
# definitions in build.mk. See build.mk.sample for a good
# starting point for a build.mk file.
#
# If you don't have a build.mk file then you get defaults for everything.
# The defaults should provide a reasonable vanilla build.
#
# This is one of only two files that configure generates (the other is config.h)
#
# There is a section below for each project within the fptools suite
#
# PLUS
#
# a section corresponding to each of the main .mk files
# included by boilerplate.mk (see boilerplate.mk for a list).
ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
$(error GNU make version 3.79.1 or later is required.)
endif
endif
################################################################################
#
# Project-wide platform variables
#
################################################################################
# A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
# specifier. E.g. sparc-sun-solaris2
#
# Build platform: the platform on which we are doing this build
# Host platform: the platform on which these binaries will run
# Target platform: the platform for which this compiler will generate code
#
# We don't support build & host being different, because the build
# process creates binaries that are run during the build, and also
# installed.
#
# If host & target are different, then we are building a compiler
# which will generate intermediate .hc files to port to the target
# architecture for bootstrapping. The libraries and stage 2 compiler
# will be built as HC files for the target system, and likely won't
# build on this host platform.
#
# An important invariant is that for any piece of source code, the
# platform on which the code is going to run is the HOST platform,
# and the platform on which we are building is the BUILD platform.
# Additionally for the compiler, the platform this compiler will
# generate code for is the TARGET. TARGET is not meaningful outside
# the compiler sources.
#
# Guidelines for when to use HOST vs. TARGET:
#
# - In the build system (Makefile, foo.mk), normally we should test
# $(HOSTPLATFORM). There are some cases (eg. installation), where
# we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
# doesn't matter which is used.
#
# - In the compiler itself, we should test HOST or TARGET depending
# on whether the conditional relates to the code being generated, or
# the platform on which the compiler is running. See the section
# on "Coding Style" in the commentary for more details.
#
# - In all other code, we should be testing HOST only.
#
# NOTE: cross-compiling is not well supported by the build system.
# You have to do a lot of work by hand to cross compile: see the
# section on "Porting GHC" in the Building Guide.
HOSTPLATFORM = @HostPlatform@
TARGETPLATFORM = @TargetPlatform@
BUILDPLATFORM = @BuildPlatform@
# Hack alert:
# in one or two places, we need to get at the OS version (major and
# perhaps even minor), HostOS_Full is the OS name reported by
# AC_CANONICAL_SYSTEM.
#
HostPlatform_CPP = @HostPlatform_CPP@
HostArch_CPP = @HostArch_CPP@
HostOS_CPP = @HostOS_CPP@
HostOS_Full = @HostOS_Full@
HostVendor_CPP = @HostVendor_CPP@
TargetPlatform_CPP = @TargetPlatform_CPP@
TargetArch_CPP = @TargetArch_CPP@
TargetOS_CPP = @TargetOS_CPP@
TargetVendor_CPP = @TargetVendor_CPP@
BuildPlatform_CPP = @BuildPlatform_CPP@
BuildArch_CPP = @BuildArch_CPP@
BuildOS_CPP = @BuildOS_CPP@
BuildVendor_CPP = @BuildVendor_CPP@
@HostPlatform_CPP@_HOST = 1
@TargetPlatform_CPP@_TARGET = 1
@BuildPlatform_CPP@_BUILD = 1
@HostArch_CPP@_HOST_ARCH = 1
@TargetArch_CPP@_TARGET_ARCH = 1
@BuildArch_CPP@_BUILD_ARCH = 1
@HostOS_CPP@_HOST_OS = 1
@TargetOS_CPP@_TARGET_OS = 1
@BuildOS_CPP@_BUILD_OS = 1
@HostVendor_CPP@_HOST_VENDOR = 1
@TargetVendor_CPP@_TARGET_VENDOR = 1
@BuildVendor_CPP@_BUILD_VENDOR = 1
# Leading underscores on symbol names in object files
# Valid options: YES/NO
#
LeadingUnderscore=@LeadingUnderscore@
# Pin a suffix on executables? If so, what (Windows only).
exeext=@exeext@
# Windows=YES if on a Windows platform
ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
Windows=YES
else
Windows=NO
endif
################################################################################
#
# project-wide flags
#
# Set of options applicable to all fptools projects
#
################################################################################
# BootingFromHc - build GHC and the libraries from .hc files?
BootingFromHc = @BootingFromHc@
# BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
# rather than registerised code, i.e., disable the mangler?
BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
# Build Order: we build Happy, Haddock and Alex before GHC if they are
# in this source tree, just in case our GHC build depends on these
# local builds rather than installed versions of the tools.
#
# Build the libs first if we're bootstrapping from .hc files.
ifeq "$(BootingFromHc)" "YES"
AllProjects = glafp-utils happy alex haddock libraries hslibs ghc greencard hdirect hood nofib docs
else
AllProjects = glafp-utils happy alex haddock ghc libraries hslibs greencard hdirect hood nofib docs
endif
#
# (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
# list is empty, then all projects present in the source tree will be built.
#
ProjectsToBuild =
#
# set ProjectsDontInstall to a list of projects which are normally built but
# not installed.
#
ProjectsDontInstall = glafp-utils nofib
#
# Should the various project tests directories be built?
#
IncludeTestDirsInBuild=NO
#
# Should the various project example directories be built?
#
IncludeExampleDirsInBuild=NO
#
# Which ways should DocBook XML documents be built?
# options are: dvi ps pdf html chm HxS
#
XMLDocWays=
################################################################################
#
# GHC project
#
# Set of (configurable) options needed by the ghc tree
# plus their default options (if any).
#
################################################################################
#---------------------------------------------------------------
#
# Variables that control how the compiler itself is built
#
#---------------------------------------------------------------
# The compiler used to build GHC is $(GHC). To change the actual compiler
# used, re-configure with --with-ghc=<path-to-ghc>.
# Extra ways in which to build the compiler (for example, you might want to
# build a profiled compiler so you can see where it spends its time)
GhcCompilerWays=
# Extra option flags to pass to the compiler that compiles the compiler
# (Ones that are essential are wired into ghc/compiler/Makefile)
# Typical options to use here:
#
# -DDEBUG include debugging code and assertions (will make the
# compiler slower and produce debugging output, but useful
# for development)
#
# -dcore-lint check the types after every pass of the compiler;
# a pretty strong internal check of the compiler being
# used to compile GHC. Useful when bootstrapping.
GhcHcOpts=-Rghc-timing
# Extra options added to specific stages of the compiler bootstrap.
# These are placed later on the command line, and may therefore
# override options from $(GhcHcOpts).
GhcStage1HcOpts=
GhcStage2HcOpts=
GhcStage3HcOpts=
# Build a compiler that will build *unregisterised* libraries and
# binaries by default. Unregisterised code is supposed to compile and
# run without any support for architecture-specific assembly mangling,
# register assignment or tail-calls, and is therefore a good way to get
# started when porting GHC to new architectures.
#
# If this is set to NO, you can still use the unregisterised way
# (way 'u') to get unregisterised code, but the default way will be
# registerised.
#
# NOTE: the stage1 compiler will be a registerised binary (assuming
# the compiler you build with is generating registerised binaries), but
# the stage2 compiler will be an unregisterised binary.
#
GhcUnregisterised=NO
# Build a compiler with a native code generator backend
# (as well as a C backend)
#
# Target platforms supported:
# i386, powerpc
# sparc has bitrotted
# AIX is not supported
ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
ifeq "$(OsSupportsNCG)$(ArchSupportsNCG)" "YESYES"
GhcWithNativeCodeGen=YES
else
GhcWithNativeCodeGen=NO
endif
# Include support for generating Java
GhcWithJavaGen=NO
HaveLibDL = @HaveLibDL@
# Whether to include GHCi in the compiler. Depends on whether the RTS linker
# has support for this OS/ARCH combination.
OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc powerpc64 sparc sparc64)))
ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
GhcWithInterpreter=YES
else
GhcWithInterpreter=NO
endif
#
# Building various ways?
# (right now, empty if not).
BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
#------------------------------------------------------------------------------
# Options for Libraries
# What extra ways to build the libraries in
# In addition to the normal sequential way, the default is to also build
# profiled prelude libraries.
# When booting from .hc files, turn this off.
ifeq "$(BootingFromHc)" "YES"
GhcLibWays=
else
GhcLibWays=p
endif
# In addition, the RTS is built in some further variations. Ways that
# make sense here:
#
# thr : threaded
# thr_p : threaded profiled
# debug : debugging (compile with -g for the C compiler, and -DDEBUG)
# debug_p : debugging profiled
# debug_u : debugging unregisterised
# thr_debug : debugging threaded
# thr_debug_p : debugging threaded profiled
#
ifeq "$(BootingFromHc)" "YES"
GhcRTSWays=
else
GhcRTSWays=thr thr_p debug thr_debug
endif
# Option flags to pass to GHC when it's compiling modules in
# fptools/libraries. Typically these are things like -O or
# -dcore-lint or -H32m. The ones that are *essential* are wired into
# the build system.
#
# -O is pretty desirable, otherwise no inlining of prelude
# things (incl "+") happens when compiling with this compiler
#
# -fgenerics switches on generation of support code for
# derivable type classes. This is now off by default,
# but we switch it on for the libraries so that we generate
# the code in case someone importing wants it
GhcLibHcOpts=-O -Rghc-timing -fgenerics
# Win32 only: Enable the RTS and libraries to be built as DLLs
DLLized=@EnableWin32DLLs@
# Strip local symbols from libraries? This can make the libraries smaller,
# but makes debugging somewhat more difficult. Doesn't work with all ld's.
#
StripLibraries=NO
# ----------------------------------------------------------------------------
# Object-file splitting
#
# Set SplitObjs=YES or NO in your build.mk
#
# Don't use -split-objs in in GhcLibHcOpts, because the build
# system needs to do other special magic if you are
# doing object-file splitting
ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" ""
SplitObjs=YES
else
SplitObjs=NO
endif
# Don't split object files for libs if we're building DLLs, or booting from
# .hc files.
ifeq "$(DLLized)" "YES"
SplitObjs=NO
endif
ifeq "$(BootingFromHc)" "YES"
SplitObjs=NO
endif
ifeq "$(GhcUnregisterised)" "YES"
SplitObjs=NO
endif
ifeq "$(TargetArch_CPP)" "ia64"
SplitObjs=NO
endif
# ----------------------------------------------------------------------------
# Options for GHC's RTS
# For an optimised RTS (you probably don't want to change these; we build
# a debugging RTS by default now. Use -debug to get it).
GhcRtsHcOpts=-optc-O2
GhcRtsCcOpts=-fomit-frame-pointer
# Include the front panel code? Needs GTK+.
GhcRtsWithFrontPanel = NO
################################################################################
#
# libraries project
#
################################################################################
# Build the Haskell Readline bindings?
#
GhcLibsWithReadline=@GhcLibsWithReadline@
# Libraries needed for linking with readline
LibsReadline=@LibsReadline@
# Include path to readline.h
# (no path == in standard include path)
#
ReadlineIncludePath=
# Math library
LIBM=@LIBM@
# Build the ObjectIO ?
#
GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
# .NET interop support?
#
DotnetSupport=@DotnetSupport@
# Build unix package?
#
GhcLibsWithUnix=@GhcLibsWithUnix@
################################################################################
#
# happy project
#
# Happy specific options
#
################################################################################
# The compiler you'd like to use to compile Happy
WithHappyHc = @WithHc@
# HappyHcOpts gives the flags to pass to the Haskell compiler used
# to compile the Happy sources with.
#
HappyHcOpts = -O
################################################################################
#
# haggis project
#
# Haggis specific options
#
################################################################################
################################################################################
#
# greencard project
#
# GreenCard specific options
#
################################################################################
################################################################################
#
# nofib project
#
# nofib specific options
#
################################################################################
WithNofibHc = $(GHC_INPLACE)
# NoFibSubDirs controls which set of tests should be run
# You can run one or more of
# imaginary
# spectral
# real
# parallel
# PRIVATE
# PENDING
# UNUSED
NoFibSubDirs = imaginary spectral real
# The different ways to build nofib. Default is just to mirror
# what is done for the ghc prelude libraries.
#
NoFibWays = $(GhcLibWays)
# Haskell compiler options for nofib
NoFibHcOpts = -O
# Number of times to run each program
NoFibRuns = 5
# ==============================================================================
#
# END OF PROJECT-SPECIFIC STUFF
#
# Now come the generic configuration options
#
# ==============================================================================
################################################################################
#
# Paths (see paths.mk)
#
################################################################################
# Directory used by GHC (and possibly other tools) for storing
# temporary files. If your TMPDIR isn't big enough, either override
# this in build.mk or set your environment variable "TMPDIR" to point
# to somewhere with more space. (TMPDIR=. is a good choice).
# DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
# override an environment variable with the value of the make variable
# of the same name (if it exists) when executing sub-processes, so
# setting the TMPDIR env var would have no effect in the build tree.
DEFAULT_TMPDIR = /tmp
ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
DEFAULT_TMPDIR = C:/TEMP
endif
ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
DEFAULT_TMPDIR = C:/TEMP
endif
# FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
FPTOOLS_TOP_ABS = @hardtop@
# The platform specific version of 'hardtop'.
FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
#
# Installation directories, we don't use half of these,
# but since the configure script has them on offer while
# passing through, we might as well set them.
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
datadir0 = @datadir@
libdir0 = @libdir@
includedir = @includedir@
oldincludedir = @oldincludedir@
mandir = @mandir@
ifeq "$(Windows)" "YES"
ifeq "$(strip $(prefix))" ""
prefix = c:/ghc
endif
# Hack: our directory layouts tend to be different on Windows, so
# hack around configure's bogus assumptions here.
datadir = $(prefix)
libdir = $(prefix)
else
#
# Unix: override libdir and datadir to put project-specific stuff in
# a subdirectory with the version number included.
#
libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0))
datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0))
endif # Windows
# Default place for putting interface files is $(libdir)
# (overriden for packages in package.mk)
ifacedir = $(libdir)
#
# Default values for most of the above are only set if
# they weren't configured to anything in particular
# via the configure script. (i.e., we make no assumption
# that the autoconf-generated script will assign defaults
# to all of the above).
#
ifeq "$(strip $(exec_prefix))" ""
exec_prefix = $(prefix)
endif
ifeq "$(strip $(bindir))" ""
bindir = $(exec_prefix)/bin
endif
#
# NOTE: by intention, libexecdir and libdir point to
# the same place.
# => Only way to override this is to set libexecdir= on the command line.
# (NOTE: configure script setting is ignored).
libexecdir = $(libdir)
ifeq "$(strip $(datadir))" ""
datadir = $(prefix)/share
endif
ifeq "$(strip $(libdir))" ""
libdir = $(exec_prefix)/lib
endif
ifeq "$(strip $(includedir))" ""
includedir = $(prefix)/include
endif
ifeq "$(strip $(oldincludedir))" ""
oldincludedir = /usr/include
endif
ifeq "$(strip $(mandir))" ""
mandir = $(prefix)/man
endif
#-----------------------------------------------------------------------------
# install configuration
#
# Set this to have files installed with a specific owner
#
INSTALL_OWNER =
#
# Set this to have files installed with a specific group
#
INSTALL_GROUP =
#
# Invocations of `install' for the four different classes
# of targets:
#
INSTALL_PROGRAM = $(INSTALL) -m 755
INSTALL_SCRIPT = $(INSTALL) -m 755
INSTALL_SHLIB = $(INSTALL) -m 755
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_DIR = $(MKDIRHIER)
# -----------------------------------------------------------------------------
# Utilities programs: flags
# If you want to give any standard flags to pretty much any utility
# (see utils.mk for a complete list), by adding a line here
#
# SRC_P_OPTS += ...
#
# where P is the utility. For example, to add -O to all Haskell
# compilations,
#
# SRC_HC_OPTS += -O
SRC_HC_OPTS += -H16m -O
# These flags make flex 8-bit
SRC_FLEX_OPTS += -8
SRC_INSTALL_BIN_OPTS += -s
# lint gets all CPP's flags too
SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
# Default fptools options for dllwrap.
SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
# Flags for CPP when running GreenCard on .pgc files
GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
################################################################################
#
# Utilities programs: where to find them
#
################################################################################
#-----------------------------------------------------------------------------
# FPtools Utility locations
# By default, the various utils needed to be build ghc and chums
# is set up to point to the utils/ directory. Define here the
# path prefix for the utilities. Notice that it's a prefix with
# a trailing slash, so that it can be concatenated directly on
# front of a program name; if it's not set then we just look
# along the shell's $(PATH)
#
# If instead you want to use installed or your own versions of these,
# override the various *_PREFIX in build.mk, i.e., having the following
# in build.mk:
#
# MKDEPENDC_PREFIX=
#
# will force `make' to rummage around in your PATH to find `mkdependC' (not
# sure it would need it in the first place, but still).
#
GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
LTX_PREFIX = $(GLAFP_UTILS)/ltx/
RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
HADDOCK_PREFIX = $(FPTOOLS_TOP)/haddock/
LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hasktags/
HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
#-----------------------------------------------------------------------------
# Haskell compilers and mkdependHS
# $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
# compilers, if available.
#
# $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
# $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
#
# NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
# (because the version numbers have to be calculated).
GHC = @WithGhc@
GhcDir = $(dir $(GHC))
GhcVersion = @GhcVersion@
GhcMajVersion = @GhcMajVersion@
GhcMinVersion = @GhcMinVersion@
GhcPatchLevel = @GhcPatchLevel@
# Canonicalised ghc version number, used for easy (integer) version
# comparisons. We must expand $(GhcMinVersion) to two digits by
# adding a leading zero if necessary:
ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
else
GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
endif
HBC = @HBC@
NHC = @NHC@
HC = @WithHc@
MKDEPENDHS = $(GHC)
# Sometimes we want to invoke ghc from the build tree in different
# projects (eg. it's handy to have a nofib & a ghc build in the same
# tree). We can refer to "this ghc" as $(GHC_INPLACE):
GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
GHC_STAGE1 = $(FPTOOLS_TOP)/ghc/compiler/stage1/ghc-inplace
GHC_STAGE2 = $(FPTOOLS_TOP)/ghc/compiler/stage2/ghc-inplace
GHC_STAGE3 = $(FPTOOLS_TOP)/ghc/compiler/stage3/ghc-inplace
#-----------------------------------------------------------------------------
# C compiler
#
# NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
# the flag --with-gcc=<blah> instead. The reason is that the configure script
# needs to know which gcc you're using in order to perform its tests.
HaveGcc = @HaveGcc@
UseGcc = YES
WhatGccIsCalled = @WhatGccIsCalled@
GccVersion = @GccVersion@
ifeq "$(strip $(HaveGcc))" "YES"
ifneq "$(strip $(UseGcc))" "YES"
CC = cc
else
CC = $(WhatGccIsCalled)
GccDir = $(dir $(WhatGccIsCalled))
endif
endif
# default C compiler flags
SRC_CC_OPTS = @SRC_CC_OPTS@
ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
SRC_CC_OPTS += -G0
endif
#-----------------------------------------------------------------------------
# GMP Library (version 2.0.x or above)
#
HaveLibGmp = @HaveLibGmp@
LibGmp = @LibGmp@
#-----------------------------------------------------------------------------
# GMP framework (Mac OS X)
#
HaveFrameworkGMP = @HaveFrameworkGMP@
#-----------------------------------------------------------------------------
# Mingwex Library
#
HaveLibMingwEx = @HaveLibMingwEx@
#-----------------------------------------------------------------------------
# Flex (currently unused, could be moved to glafp-utils)
# FLEX = @LEX@
# Don't bother with -lfl, we define our own yywrap()s anyway.
# FLEX_LIB =
#WAS:FLEX_LIB = @LEXLIB@
#-----------------------------------------------------------------------------
# Other standard (ha!) Unix utilities
AR = @ArCmd@
ArSupportsInput = @ArSupportsInput@
# Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
BASH = /usr/local/bin/bash
CONTEXT_DIFF = @ContextDiffCmd@
CP = cp
CPP = @CPP@ @CPPFLAGS@
CTAGS = $(ETAGS)
#
# RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
# behave plausibly on Haskell sources.
#
RAWCPP_FLAGS = -undef -traditional
FIND = @FindCmd@
SORT = @SortCmd@
INSTALL = @INSTALL@
#
# Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
# install-sh script (if chosen). This not terribly useful to us, so we convert
# it into an abs. path.
#
INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
LATEX = latex
HEVEA = hevea
HACHA = hacha
LN_S = @LN_S@
MANMACROS = -man
MSMACROS = -ms
MV = mv
NROFF = nroff
PERL = @PerlCmd@
PYTHON = @PythonCmd@
PIC = pic
PREPROCESSCMD = $(CC) -E
RANLIB = @RANLIB@
RM = rm -f
SED = @SedCmd@
SHELL = /bin/sh
LD = @LdCmd@
# Some ld's support the -x flag and some don't, so the configure
# script detects which we have and sets LdXFlag to "-x" or ""
# respectively.
LD_X = @LdXFlag@
# GNU ld supports input via a linker script, which is useful to avoid
# overflowing command-line length limits.
LdIsGNULd = @LdIsGNULd@
#
# In emergency situations, REAL_SHELL is used to perform shell commands
# from within the ghc driver script, by scribbling the command line to
# a temp file and then having $(REAL_SHELL) execute it.
#
# The reason for having to do this is that overly long command lines
# cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
# 2.5.1), which is why this backdoor is provided. The situation of overly
# long command lines is either encountered while doing `make boot' in ghc/compiler,
# or when linking the compiler binary (`hsc').
#
# We do not use SHELL to execute long commands, as `make' will more than likely
# override whatever setting you have in your environment while executing.
# By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
# as it is SHELL that will show up the bogosity in the first place, but setting
# it to anything else isn't really portable.
#
# ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
# with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
# command shell.
#
REAL_SHELL=$(SHELL)
SIZE = size
STRIP = strip
TAR = @TarCmd@
ZIP = zip
#
# This is special to literate/, ToDo: add literate-specific
# configure setup to literate/.
#
TBL = tbl
TEX = tex
TGRIND = tgrind
TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
TIB = tib
TIME = @TimeCmd@
TROFF = troff
UNAME = uname
#-----------------------------------------------------------------------------
# DocBook XML stuff
XSLTPROC = @XsltprocCmd@
XMLLINT = @XmllintCmd@
FOP = @FopCmd@
XMLTEX = @XmltexCmd@
PDFXMLTEX = @PdfxmltexCmd@
DVIPS = @DvipsCmd@
DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
--stringparam section.autolabel 1 \
--stringparam section.label.includes.component.label 1
#-----------------------------------------------------------------------------
# FPtools support software
# Stuff from fptools/glafp-utils
MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
LTX = $(LTX_PREFIX)ltx
MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
LNDIR = $(LNDIR_PREFIX)lndir
ETAGS = $(ETAGS_PREFIX)etags
VERBATIM = $(VERBATIM_PREFIX)verbatim
SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
RUNTEST = $(RUNTEST_PREFIX)runstdtest
BLD_DLL = dllwrap
#
# .NET support software
#
ILX2IL = ilx2il
ILASM = ilasm
#
# ghc-pkg
#
GHC_PKG = @GhcPkgCmd@
#
# GreenCard
#
GREENCARD = @GreenCardCmd@
GREENCARD_VERSION = @GreenCardVersion@
#
# Happy
#
HAPPY = @HappyCmd@
HAPPY_VERSION = @HappyVersion@
#
# Options to pass to Happy when we're going to compile the output with GHC
#
GHC_HAPPY_OPTS = -agc
# Temp. to work around performance problems in the HEAD around 8/12/2003,
# A Happy compiled with this compiler needs more stack.
SRC_HAPPY_OPTS = +RTS -K2m -RTS
#
# Alex
#
ALEX = @AlexCmd@
ALEX_VERSION = @AlexVersion@
#
# Options to pass to Happy when we're going to compile the output with GHC
#
GHC_ALEX_OPTS = -g
#
# Haddock
#
HADDOCK = @HaddockCmd@
HADDOCK_INPLACE = $(HADDOCK_PREFIX)/src/haddock-inplace
#
# Stuff from fptools/literate
#
LIT2PGM = $(LITERATE_PREFIX)lit2pgm
LIT2HTML = $(LITERATE_PREFIX)lit2html
LIT2LATEX = $(LITERATE_PREFIX)lit2latex
MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
LIT2TEXT = $(LITERATE_PREFIX)lit2text
#
# Stuff from fptools/ghc/utils
#
UNLIT = $(UNLIT_PREFIX)unlit$(exeext)
HP2PS = $(HP2PS_PREFIX)hp2ps$(exeext)
HSTAGS = $(HSTAGS_PREFIX)hasktags
HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
#
# Options for the compiling different `ways'. Various projects within
# the glorious fptools tree support building in various user-configured
# ways. For instance, you could set up one `way' such that the prelude
# libraries all were built with the option -ffoldr-build-on.
#
# To configure up your own way, have a look at some of the standard ways
# such as profiling, and create your own set of WAY_*_OPTS defs below.
# After having done that, add your way string to WAYS, and after having
# run the configure script, the different projects will add the new way
# to the list of ways they support.
#
#
# IMPORTANT! The WAYS variable configures the different `ways'
# you want to build a project (or maybe just parts of it, as is
# the case for ghc/). This variable is intended set inside the
# project mk setup, enforcing a global fptools WAYS is a bit too
# much (do you *really* want to build glafp-utils the profiled-concurrent
# way?)
#
#
# Definitions of the different ways:
#
# * their name:
# - tag, e.g., p
# - description, e.g., profiling
# * what they mean to the driver:
# - WAY_p_HC_OPTS gives the list of command-line options
# to the driver.
#
#
# The ways currently defined.
#
ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
USER_WAYS=a b c d e f g h j k l m n o A B
#
# The following ways currently have treated specially, p u t mg,
# as the driver script treats these guys specially and needs to carefully be told
# about the options for these. Hence, we hide the required command line options
# for these in the ghc/driver, as this is the only place they are needed.
#
# If you want to add to these default options, fill in the variables below:
# Way 'i':
WAY_i_NAME=ILX
WAY_i_HC_OPTS= -filx -fruntime-types
# Way 'p':
WAY_p_NAME=profiling
WAY_p_HC_OPTS= -prof
# Way 't':
WAY_t_NAME=ticky-ticky profiling
WAY_t_HC_OPTS= -ticky
# Way `u':
WAY_u_NAME=unregisterized (using portable C only)
WAY_u_HC_OPTS=-unreg
# Way `s':
WAY_s_NAME=threads (for SMP)
WAY_s_HC_OPTS=-smp -optc-DTHREADED_RTS
# Way `mp':
WAY_mp_NAME=parallel
WAY_mp_HC_OPTS=-parallel
# Way `mg':
WAY_mg_NAME=GranSim
WAY_mg_HC_OPTS=-gransim
#
# These ways apply to the RTS only:
#
# Way 'thr':
WAY_thr_NAME=threaded
WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
# Way 'thr_p':
WAY_thr_p_NAME=threaded profiled
WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
# Way 'debug':
WAY_debug_NAME=debug
WAY_debug_HC_OPTS=-optc-DDEBUG
# Way 'debug_p':
WAY_debug_p_NAME=debug profiled
WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
# Way 'debug_u':
WAY_debug_u_NAME=debug unregisterised
WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
# Way 'debug_s':
WAY_debug_s_NAME=debug SMP
WAY_debug_s_HC_OPTS=-optc-DDEBUG -optc-DTHREADED_RTS -smp
# Way 'thr_debug':
WAY_thr_debug_NAME=threaded
WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
# Way 'thr_debug_p':
WAY_thr_debug_p_NAME=threaded
WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
#
# Add user-way configurations here:
#
WAY_A_NAME=
WAY_A_HC_OPTS=
WAY_B_NAME=
WAY_B_HC_OPTS=
WAY_a_NAME=
WAY_a_HC_OPTS=
WAY_b_NAME=
WAY_b_HC_OPTS=
WAY_c_NAME=
WAY_c_HC_OPTS=
WAY_d_NAME=
WAY_d_HC_OPTS=
WAY_e_NAME=
WAY_e_HC_OPTS=
WAY_f_NAME=
WAY_f_HC_OPTS=
WAY_g_NAME=
WAY_g_HC_OPTS=
WAY_h_NAME=
WAY_h_HC_OPTS=
WAY_j_NAME=
WAY_j_HC_OPTS=
WAY_k_NAME=
WAY_k_HC_OPTS=
WAY_l_NAME=
WAY_l_HC_OPTS=
WAY_m_NAME=
WAY_m_HC_OPTS=
WAY_n_NAME=
WAY_n_HC_OPTS=
WAY_o_NAME=
WAY_o_HC_OPTS=
################################################################################
#
# 31-bit-Int Core files
#
################################################################################
#
# It is possible to configure the compiler and prelude to support 31-bit
# integers, suitable for a back-end and RTS using a tag bit on a 32-bit
# architecture. Currently the only useful output from this option is external Core
# files. The following additions to your build.mk will produce the
# 31-bit core output. Note that this is *not* just a library "way"; the
# compiler must be built a special way too.
# GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
# GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
# GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
# SplitObjs=NO
Jump to Line
Something went wrong with that request. Please try again.