689 Externals/mbedtls/include/mbedtls/aes.h
View file

Large diffs are not rendered by default.

53 Externals/mbedtls/include/mbedtls/aesni.h
View file
@@ -3,6 +3,10 @@
*
* \brief AES-NI for hardware AES acceleration on some Intel processors
*
* \warning These functions are only for internal use by other library
* functions; you must not call them directly.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -23,6 +27,12 @@
#ifndef MBEDTLS_AESNI_H
#define MBEDTLS_AESNI_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include "aes.h"

#define MBEDTLS_AESNI_AES 0x02000000u
@@ -41,7 +51,10 @@ extern "C" {
#endif

/**
* \brief AES-NI features detection routine
* \brief Internal function to detect the AES-NI feature in CPUs.
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param what The feature to detect
* (MBEDTLS_AESNI_AES or MBEDTLS_AESNI_CLMUL)
@@ -51,7 +64,10 @@ extern "C" {
int mbedtls_aesni_has_support( unsigned int what );

/**
* \brief AES-NI AES-ECB block en(de)cryption
* \brief Internal AES-NI AES-ECB block encryption and decryption
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
@@ -61,12 +77,15 @@ int mbedtls_aesni_has_support( unsigned int what );
* \return 0 on success (cannot fail)
*/
int mbedtls_aesni_crypt_ecb( mbedtls_aes_context *ctx,
int mode,
const unsigned char input[16],
unsigned char output[16] );
int mode,
const unsigned char input[16],
unsigned char output[16] );

/**
* \brief GCM multiplication: c = a * b in GF(2^128)
* \brief Internal GCM multiplication: c = a * b in GF(2^128)
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param c Result
* \param a First operand
@@ -76,21 +95,29 @@ int mbedtls_aesni_crypt_ecb( mbedtls_aes_context *ctx,
* elements of GF(2^128) as per the GCM spec.
*/
void mbedtls_aesni_gcm_mult( unsigned char c[16],
const unsigned char a[16],
const unsigned char b[16] );
const unsigned char a[16],
const unsigned char b[16] );

/**
* \brief Compute decryption round keys from encryption round keys
* \brief Internal round key inversion. This function computes
* decryption round keys from the encryption round keys.
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param invkey Round keys for the equivalent inverse cipher
* \param fwdkey Original round keys (for encryption)
* \param nr Number of rounds (that is, number of round keys minus one)
*/
void mbedtls_aesni_inverse_key( unsigned char *invkey,
const unsigned char *fwdkey, int nr );
const unsigned char *fwdkey,
int nr );

/**
* \brief Perform key expansion (for encryption)
* \brief Internal key expansion for encryption
*
* \note This function is only for internal use by other library
* functions; you must not call it directly.
*
* \param rk Destination buffer where the round keys are written
* \param key Encryption key
@@ -99,8 +126,8 @@ void mbedtls_aesni_inverse_key( unsigned char *invkey,
* \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH
*/
int mbedtls_aesni_setkey_enc( unsigned char *rk,
const unsigned char *key,
size_t bits );
const unsigned char *key,
size_t bits );

#ifdef __cplusplus
}
65 Externals/mbedtls/include/mbedtls/arc4.h
View file
@@ -3,6 +3,10 @@
*
* \brief The ARCFOUR stream cipher
*
* \warning ARC4 is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers instead.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -19,6 +23,7 @@
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*
*/
#ifndef MBEDTLS_ARC4_H
#define MBEDTLS_ARC4_H
@@ -31,36 +36,57 @@

#include <stddef.h>

#if !defined(MBEDTLS_ARC4_ALT)
// Regular implementation
//
/* MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED -0x0019 /**< ARC4 hardware accelerator failed. */

#ifdef __cplusplus
extern "C" {
#endif

#if !defined(MBEDTLS_ARC4_ALT)
// Regular implementation
//

/**
* \brief ARC4 context structure
* \brief ARC4 context structure
*
* \warning ARC4 is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers instead.
*
*/
typedef struct
typedef struct mbedtls_arc4_context
{
int x; /*!< permutation index */
int y; /*!< permutation index */
unsigned char m[256]; /*!< permutation table */
}
mbedtls_arc4_context;

#else /* MBEDTLS_ARC4_ALT */
#include "arc4_alt.h"
#endif /* MBEDTLS_ARC4_ALT */

/**
* \brief Initialize ARC4 context
*
* \param ctx ARC4 context to be initialized
*
* \warning ARC4 is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*
*/
void mbedtls_arc4_init( mbedtls_arc4_context *ctx );

/**
* \brief Clear ARC4 context
*
* \param ctx ARC4 context to be cleared
*
* \warning ARC4 is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*
*/
void mbedtls_arc4_free( mbedtls_arc4_context *ctx );

@@ -70,6 +96,11 @@ void mbedtls_arc4_free( mbedtls_arc4_context *ctx );
* \param ctx ARC4 context to be setup
* \param key the secret key
* \param keylen length of the key, in bytes
*
* \warning ARC4 is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*
*/
void mbedtls_arc4_setup( mbedtls_arc4_context *ctx, const unsigned char *key,
unsigned int keylen );
@@ -83,29 +114,31 @@ void mbedtls_arc4_setup( mbedtls_arc4_context *ctx, const unsigned char *key,
* \param output buffer for the output data
*
* \return 0 if successful
*
* \warning ARC4 is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*
*/
int mbedtls_arc4_crypt( mbedtls_arc4_context *ctx, size_t length, const unsigned char *input,
unsigned char *output );

#ifdef __cplusplus
}
#endif

#else /* MBEDTLS_ARC4_ALT */
#include "arc4_alt.h"
#endif /* MBEDTLS_ARC4_ALT */

#ifdef __cplusplus
extern "C" {
#endif
#if defined(MBEDTLS_SELF_TEST)

/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*
* \warning ARC4 is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*
*/
int mbedtls_arc4_self_test( int verbose );

#endif /* MBEDTLS_SELF_TEST */

#ifdef __cplusplus
}
#endif
370 Externals/mbedtls/include/mbedtls/aria.h
View file

Large diffs are not rendered by default.

20 Externals/mbedtls/include/mbedtls/asn1.h
View file
@@ -2,7 +2,8 @@
* \file asn1.h
*
* \brief Generic ASN.1 parsing
*
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -59,7 +60,7 @@

/**
* \name DER constants
* These constants comply with DER encoded the ANS1 type tags.
* These constants comply with the DER encoded ASN.1 type tags.
* DER encoding uses hexadecimal representation.
* An example DER sequence is:\n
* - 0x02 -- tag indicating INTEGER
@@ -87,6 +88,21 @@
#define MBEDTLS_ASN1_PRIMITIVE 0x00
#define MBEDTLS_ASN1_CONSTRUCTED 0x20
#define MBEDTLS_ASN1_CONTEXT_SPECIFIC 0x80

/*
* Bit masks for each of the components of an ASN.1 tag as specified in
* ITU X.690 (08/2015), section 8.1 "General rules for encoding",
* paragraph 8.1.2.2:
*
* Bit 8 7 6 5 1
* +-------+-----+------------+
* | Class | P/C | Tag number |
* +-------+-----+------------+
*/
#define MBEDTLS_ASN1_TAG_CLASS_MASK 0xC0
#define MBEDTLS_ASN1_TAG_PC_MASK 0x20
#define MBEDTLS_ASN1_TAG_VALUE_MASK 0x1F

/* \} name */
/* \} addtogroup asn1_module */

319 Externals/mbedtls/include/mbedtls/asn1write.h
View file

Large diffs are not rendered by default.

12 Externals/mbedtls/include/mbedtls/base64.h
View file
@@ -2,7 +2,8 @@
* \file base64.h
*
* \brief RFC 1521 base64 encoding/decoding
*
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -23,6 +24,12 @@
#ifndef MBEDTLS_BASE64_H
#define MBEDTLS_BASE64_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include <stddef.h>

#define MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL -0x002A /**< Output buffer too small. */
@@ -74,13 +81,16 @@ int mbedtls_base64_encode( unsigned char *dst, size_t dlen, size_t *olen,
int mbedtls_base64_decode( unsigned char *dst, size_t dlen, size_t *olen,
const unsigned char *src, size_t slen );

#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_base64_self_test( int verbose );

#endif /* MBEDTLS_SELF_TEST */

#ifdef __cplusplus
}
#endif
920 Externals/mbedtls/include/mbedtls/bignum.h
View file

Large diffs are not rendered by default.

202 Externals/mbedtls/include/mbedtls/blowfish.h
View file
@@ -2,7 +2,8 @@
* \file blowfish.h
*
* \brief Blowfish block cipher
*
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -32,69 +33,96 @@
#include <stddef.h>
#include <stdint.h>

#include "platform_util.h"

#define MBEDTLS_BLOWFISH_ENCRYPT 1
#define MBEDTLS_BLOWFISH_DECRYPT 0
#define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448
#define MBEDTLS_BLOWFISH_MIN_KEY_BITS 32
#define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */
#define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */

#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH -0x0016 /**< Invalid key length. */
#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */
#if !defined(MBEDTLS_DEPRECATED_REMOVED)
#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0016 )
#endif /* !MBEDTLS_DEPRECATED_REMOVED */
#define MBEDTLS_ERR_BLOWFISH_BAD_INPUT_DATA -0x0016 /**< Bad input data. */

#if !defined(MBEDTLS_BLOWFISH_ALT)
// Regular implementation
//
#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */

/* MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED -0x0017 /**< Blowfish hardware accelerator failed. */

#ifdef __cplusplus
extern "C" {
#endif

#if !defined(MBEDTLS_BLOWFISH_ALT)
// Regular implementation
//

/**
* \brief Blowfish context structure
*/
typedef struct
typedef struct mbedtls_blowfish_context
{
uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2]; /*!< Blowfish round keys */
uint32_t S[4][256]; /*!< key dependent S-boxes */
}
mbedtls_blowfish_context;

#else /* MBEDTLS_BLOWFISH_ALT */
#include "blowfish_alt.h"
#endif /* MBEDTLS_BLOWFISH_ALT */

/**
* \brief Initialize Blowfish context
* \brief Initialize a Blowfish context.
*
* \param ctx Blowfish context to be initialized
* \param ctx The Blowfish context to be initialized.
* This must not be \c NULL.
*/
void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx );

/**
* \brief Clear Blowfish context
* \brief Clear a Blowfish context.
*
* \param ctx Blowfish context to be cleared
* \param ctx The Blowfish context to be cleared.
* This may be \c NULL, in which case this function
* returns immediately. If it is not \c NULL, it must
* point to an initialized Blowfish context.
*/
void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx );

/**
* \brief Blowfish key schedule
* \brief Perform a Blowfish key schedule operation.
*
* \param ctx Blowfish context to be initialized
* \param key encryption key
* \param keybits must be between 32 and 448 bits
* \param ctx The Blowfish context to perform the key schedule on.
* \param key The encryption key. This must be a readable buffer of
* length \p keybits Bits.
* \param keybits The length of \p key in Bits. This must be between
* \c 32 and \c 448 and a multiple of \c 8.
*
* \return 0 if successful, or MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key,
unsigned int keybits );

/**
* \brief Blowfish-ECB block encryption/decryption
* \brief Perform a Blowfish-ECB block encryption/decryption operation.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param input 8-byte input block
* \param output 8-byte output block
* \param ctx The Blowfish context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. Possible values are
* #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
* #MBEDTLS_BLOWFISH_DECRYPT for decryption.
* \param input The input block. This must be a readable buffer
* of size \c 8 Bytes.
* \param output The output block. This must be a writable buffer
* of size \c 8 Bytes.
*
* \return 0 if successful
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
int mode,
@@ -103,9 +131,7 @@ int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,

#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief Blowfish-CBC buffer encryption/decryption
* Length should be a multiple of the block
* size (8 bytes)
* \brief Perform a Blowfish-CBC buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -115,15 +141,22 @@ int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
* \param ctx The Blowfish context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. Possible values are
* #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
* #MBEDTLS_BLOWFISH_DECRYPT for decryption.
* \param length The length of the input data in Bytes. This must be
* multiple of \c 8.
* \param iv The initialization vector. This must be a read/write buffer
* of length \c 8 Bytes. It is updated by this function.
* \param input The input data. This must be a readable buffer of length
* \p length Bytes.
* \param output The output data. This must be a writable buffer of length
* \p length Bytes.
*
* \return 0 if successful, or
* MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
int mode,
@@ -135,7 +168,7 @@ int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,

#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
* \brief Blowfish CFB buffer encryption/decryption.
* \brief Perform a Blowfish CFB buffer encryption/decryption operation.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
@@ -145,15 +178,25 @@ int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param length length of the input data
* \param iv_off offset in IV (updated after use)
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
* \param ctx The Blowfish context to use. This must be initialized
* and bound to a key.
* \param mode The mode of operation. Possible values are
* #MBEDTLS_BLOWFISH_ENCRYPT for encryption, or
* #MBEDTLS_BLOWFISH_DECRYPT for decryption.
* \param length The length of the input data in Bytes.
* \param iv_off The offset in the initialiation vector.
* The value pointed to must be smaller than \c 8 Bytes.
* It is updated by this function to support the aforementioned
* streaming usage.
* \param iv The initialization vector. This must be a read/write buffer
* of size \c 8 Bytes. It is updated after use.
* \param input The input data. This must be a readable buffer of length
* \p length Bytes.
* \param output The output data. This must be a writable buffer of length
* \p length Bytes.
*
* \return 0 if successful
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
int mode,
@@ -166,22 +209,67 @@ int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,

#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
* \brief Blowfish-CTR buffer encryption/decryption
* \brief Perform a Blowfish-CTR buffer encryption/decryption operation.
*
* \warning You must never reuse a nonce value with the same key. Doing so
* would void the encryption for the two messages encrypted with
* the same nonce and key.
*
* There are two common strategies for managing nonces with CTR:
*
* 1. You can handle everything as a single message processed over
* successive calls to this function. In that case, you want to
* set \p nonce_counter and \p nc_off to 0 for the first call, and
* then preserve the values of \p nonce_counter, \p nc_off and \p
* stream_block across calls to this function as they will be
* updated by this function.
*
* With this strategy, you must not encrypt more than 2**64
* blocks of data with the same key.
*
* 2. You can encrypt separate messages by dividing the \p
* nonce_counter buffer in two areas: the first one used for a
* per-message nonce, handled by yourself, and the second one
* updated by this function internally.
*
* For example, you might reserve the first 4 bytes for the
* per-message nonce, and the last 4 bytes for internal use. In that
* case, before calling this function on a new message you need to
* set the first 4 bytes of \p nonce_counter to your chosen nonce
* value, the last 4 to 0, and \p nc_off to 0 (which will cause \p
* stream_block to be ignored). That way, you can encrypt at most
* 2**32 messages of up to 2**32 blocks each with the same key.
*
* Warning: You have to keep the maximum use of your counter in mind!
* The per-message nonce (or information sufficient to reconstruct
* it) needs to be communicated with the ciphertext and must be unique.
* The recommended way to ensure uniqueness is to use a message
* counter.
*
* \param ctx Blowfish context
* \param length The length of the data
* Note that for both stategies, sizes are measured in blocks and
* that a Blowfish block is 8 bytes.
*
* \warning Upon return, \p stream_block contains sensitive data. Its
* content must not be written to insecure storage and should be
* securely discarded as soon as it's no longer needed.
*
* \param ctx The Blowfish context to use. This must be initialized
* and bound to a key.
* \param length The length of the input data in Bytes.
* \param nc_off The offset in the current stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be 0 at the start of a stream.
* \param nonce_counter The 64-bit nonce and counter.
* \param stream_block The saved stream-block for resuming. Is overwritten
* by the function.
* \param input The input data stream
* \param output The output data stream
*
* \return 0 if successful
* within current cipher stream). The offset pointer
* should be \c 0 at the start of a stream and must be
* smaller than \c 8. It is updated by this function.
* \param nonce_counter The 64-bit nonce and counter. This must point to a
* read/write buffer of length \c 8 Bytes.
* \param stream_block The saved stream-block for resuming. This must point to
* a read/write buffer of length \c 8 Bytes.
* \param input The input data. This must be a readable buffer of
* length \p length Bytes.
* \param output The output data. This must be a writable buffer of
* length \p length Bytes.
*
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx,
size_t length,
@@ -196,8 +284,4 @@ int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx,
}
#endif

#else /* MBEDTLS_BLOWFISH_ALT */
#include "blowfish_alt.h"
#endif /* MBEDTLS_BLOWFISH_ALT */

#endif /* blowfish.h */
72 Externals/mbedtls/include/mbedtls/bn_mul.h
View file
@@ -1,8 +1,9 @@
/**
* \file bn_mul.h
*
* \brief Multi-precision integer library
*
* \brief Multi-precision integer library
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -37,6 +38,12 @@
#ifndef MBEDTLS_BN_MUL_H
#define MBEDTLS_BN_MUL_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include "bignum.h"

#if defined(MBEDTLS_HAVE_ASM)
@@ -48,7 +55,14 @@
/* armcc5 --gnu defines __GNUC__ but doesn't support GNU's extended asm */
#if defined(__GNUC__) && \
( !defined(__ARMCC_VERSION) || __ARMCC_VERSION >= 6000000 )
#if defined(__i386__)

/*
* Disable use of the i386 assembly code below if option -O0, to disable all
* compiler optimisations, is passed, detected with __OPTIMIZE__
* This is done as the number of registers used in the assembly code doesn't
* work with the -O0 option.
*/
#if defined(__i386__) && defined(__OPTIMIZE__)

#define MULADDC_INIT \
asm( \
@@ -141,7 +155,7 @@
"movl %%esi, %3 \n\t" \
: "=m" (t), "=m" (c), "=m" (d), "=m" (s) \
: "m" (t), "m" (s), "m" (d), "m" (c), "m" (b) \
: "eax", "ecx", "edx", "esi", "edi" \
: "eax", "ebx", "ecx", "edx", "esi", "edi" \
);

#else
@@ -153,7 +167,7 @@
"movl %%esi, %3 \n\t" \
: "=m" (t), "=m" (c), "=m" (d), "=m" (s) \
: "m" (t), "m" (s), "m" (d), "m" (c), "m" (b) \
: "eax", "ecx", "edx", "esi", "edi" \
: "eax", "ebx", "ecx", "edx", "esi", "edi" \
);
#endif /* SSE2 */
#endif /* i386 */
@@ -162,19 +176,19 @@

#define MULADDC_INIT \
asm( \
"xorq %%r8, %%r8 \n\t"
"xorq %%r8, %%r8\n"

#define MULADDC_CORE \
"movq (%%rsi), %%rax \n\t" \
"mulq %%rbx \n\t" \
"addq $8, %%rsi \n\t" \
"addq %%rcx, %%rax \n\t" \
"movq %%r8, %%rcx \n\t" \
"adcq $0, %%rdx \n\t" \
"nop \n\t" \
"addq %%rax, (%%rdi) \n\t" \
"adcq %%rdx, %%rcx \n\t" \
"addq $8, %%rdi \n\t"
"movq (%%rsi), %%rax\n" \
"mulq %%rbx\n" \
"addq $8, %%rsi\n" \
"addq %%rcx, %%rax\n" \
"movq %%r8, %%rcx\n" \
"adcq $0, %%rdx\n" \
"nop \n" \
"addq %%rax, (%%rdi)\n" \
"adcq %%rdx, %%rcx\n" \
"addq $8, %%rdi\n"

#define MULADDC_STOP \
: "+c" (c), "+D" (d), "+S" (s) \
@@ -520,7 +534,7 @@
"swi r3, %2 \n\t" \
: "=m" (c), "=m" (d), "=m" (s) \
: "m" (s), "m" (d), "m" (c), "m" (b) \
: "r3", "r4" "r5", "r6", "r7", "r8", \
: "r3", "r4", "r5", "r6", "r7", "r8", \
"r9", "r10", "r11", "r12", "r13" \
);

@@ -557,9 +571,8 @@
#endif /* TriCore */

/*
* gcc -O0 by default uses r7 for the frame pointer, so it complains about our
* use of r7 below, unless -fomit-frame-pointer is passed. Unfortunately,
* passing that option is not easy when building with yotta.
* Note, gcc -O0 by default uses r7 for the frame pointer, so it complains about
* our use of r7 below, unless -fomit-frame-pointer is passed.
*
* On the other hand, -fomit-frame-pointer is implied by any -Ox options with
* x !=0, which we can detect using __OPTIMIZE__ (which is also defined by
@@ -629,6 +642,23 @@
"r6", "r7", "r8", "r9", "cc" \
);

#elif defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)

#define MULADDC_INIT \
asm(

#define MULADDC_CORE \
"ldr r0, [%0], #4 \n\t" \
"ldr r1, [%1] \n\t" \
"umaal r1, %2, %3, r0 \n\t" \
"str r1, [%1], #4 \n\t"

#define MULADDC_STOP \
: "=r" (s), "=r" (d), "=r" (c) \
: "r" (b), "0" (s), "1" (d), "2" (c) \
: "r0", "r1", "memory" \
);

#else

#define MULADDC_INIT \
@@ -726,7 +756,7 @@
"sw $10, %2 \n\t" \
: "=m" (c), "=m" (d), "=m" (s) \
: "m" (s), "m" (d), "m" (c), "m" (b) \
: "$9", "$10", "$11", "$12", "$13", "$14", "$15" \
: "$9", "$10", "$11", "$12", "$13", "$14", "$15", "lo", "hi" \
);

#endif /* MIPS */
255 Externals/mbedtls/include/mbedtls/camellia.h
View file

Large diffs are not rendered by default.

289 Externals/mbedtls/include/mbedtls/ccm.h
View file

Large diffs are not rendered by default.

9 Externals/mbedtls/include/mbedtls/certs.h
View file
@@ -2,7 +2,8 @@
* \file certs.h
*
* \brief Sample certificates and DHM parameters for testing
*
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -23,6 +24,12 @@
#ifndef MBEDTLS_CERTS_H
#define MBEDTLS_CERTS_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include <stddef.h>

#ifdef __cplusplus
226 Externals/mbedtls/include/mbedtls/chacha20.h
View file
@@ -0,0 +1,226 @@
/**
* \file chacha20.h
*
* \brief This file contains ChaCha20 definitions and functions.
*
* ChaCha20 is a stream cipher that can encrypt and decrypt
* information. ChaCha was created by Daniel Bernstein as a variant of
* its Salsa cipher https://cr.yp.to/chacha/chacha-20080128.pdf
* ChaCha20 is the variant with 20 rounds, that was also standardized
* in RFC 7539.
*
* \author Daniel King <damaki.gh@gmail.com>
*/

/* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved.
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of Mbed TLS (https://tls.mbed.org)
*/

#ifndef MBEDTLS_CHACHA20_H
#define MBEDTLS_CHACHA20_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include <stdint.h>
#include <stddef.h>

#define MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA -0x0051 /**< Invalid input parameter(s). */

/* MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE is deprecated and should not be
* used. */
#define MBEDTLS_ERR_CHACHA20_FEATURE_UNAVAILABLE -0x0053 /**< Feature not available. For example, s part of the API is not implemented. */

/* MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED is deprecated and should not be used.
*/
#define MBEDTLS_ERR_CHACHA20_HW_ACCEL_FAILED -0x0055 /**< Chacha20 hardware accelerator failed. */

#ifdef __cplusplus
extern "C" {
#endif

#if !defined(MBEDTLS_CHACHA20_ALT)

typedef struct mbedtls_chacha20_context
{
uint32_t state[16]; /*! The state (before round operations). */
uint8_t keystream8[64]; /*! Leftover keystream bytes. */
size_t keystream_bytes_used; /*! Number of keystream bytes already used. */
}
mbedtls_chacha20_context;

#else /* MBEDTLS_CHACHA20_ALT */
#include "chacha20_alt.h"
#endif /* MBEDTLS_CHACHA20_ALT */

/**
* \brief This function initializes the specified ChaCha20 context.
*
* It must be the first API called before using
* the context.
*
* It is usually followed by calls to
* \c mbedtls_chacha20_setkey() and
* \c mbedtls_chacha20_starts(), then one or more calls to
* to \c mbedtls_chacha20_update(), and finally to
* \c mbedtls_chacha20_free().
*
* \param ctx The ChaCha20 context to initialize.
* This must not be \c NULL.
*/
void mbedtls_chacha20_init( mbedtls_chacha20_context *ctx );

/**
* \brief This function releases and clears the specified
* ChaCha20 context.
*
* \param ctx The ChaCha20 context to clear. This may be \c NULL,
* in which case this function is a no-op. If it is not
* \c NULL, it must point to an initialized context.
*
*/
void mbedtls_chacha20_free( mbedtls_chacha20_context *ctx );

/**
* \brief This function sets the encryption/decryption key.
*
* \note After using this function, you must also call
* \c mbedtls_chacha20_starts() to set a nonce before you
* start encrypting/decrypting data with
* \c mbedtls_chacha_update().
*
* \param ctx The ChaCha20 context to which the key should be bound.
* It must be initialized.
* \param key The encryption/decryption key. This must be \c 32 Bytes
* in length.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or key is NULL.
*/
int mbedtls_chacha20_setkey( mbedtls_chacha20_context *ctx,
const unsigned char key[32] );

/**
* \brief This function sets the nonce and initial counter value.
*
* \note A ChaCha20 context can be re-used with the same key by
* calling this function to change the nonce.
*
* \warning You must never use the same nonce twice with the same key.
* This would void any confidentiality guarantees for the
* messages encrypted with the same nonce and key.
*
* \param ctx The ChaCha20 context to which the nonce should be bound.
* It must be initialized and bound to a key.
* \param nonce The nonce. This must be \c 12 Bytes in size.
* \param counter The initial counter value. This is usually \c 0.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_CHACHA20_BAD_INPUT_DATA if ctx or nonce is
* NULL.
*/
int mbedtls_chacha20_starts( mbedtls_chacha20_context* ctx,
const unsigned char nonce[12],
uint32_t counter );

/**
* \brief This function encrypts or decrypts data.
*
* Since ChaCha20 is a stream cipher, the same operation is
* used for encrypting and decrypting data.
*
* \note The \p input and \p output pointers must either be equal or
* point to non-overlapping buffers.
*
* \note \c mbedtls_chacha20_setkey() and
* \c mbedtls_chacha20_starts() must be called at least once
* to setup the context before this function can be called.
*
* \note This function can be called multiple times in a row in
* order to encrypt of decrypt data piecewise with the same
* key and nonce.
*
* \param ctx The ChaCha20 context to use for encryption or decryption.
* It must be initialized and bound to a key and nonce.
* \param size The length of the input data in Bytes.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `size == 0`.
* \param output The buffer holding the output data.
* This must be able to hold \p size Bytes.
* This pointer can be \c NULL if `size == 0`.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_chacha20_update( mbedtls_chacha20_context *ctx,
size_t size,
const unsigned char *input,
unsigned char *output );

/**
* \brief This function encrypts or decrypts data with ChaCha20 and
* the given key and nonce.
*
* Since ChaCha20 is a stream cipher, the same operation is
* used for encrypting and decrypting data.
*
* \warning You must never use the same (key, nonce) pair more than
* once. This would void any confidentiality guarantees for
* the messages encrypted with the same nonce and key.
*
* \note The \p input and \p output pointers must either be equal or
* point to non-overlapping buffers.
*
* \param key The encryption/decryption key.
* This must be \c 32 Bytes in length.
* \param nonce The nonce. This must be \c 12 Bytes in size.
* \param counter The initial counter value. This is usually \c 0.
* \param size The length of the input data in Bytes.
* \param input The buffer holding the input data.
* This pointer can be \c NULL if `size == 0`.
* \param output The buffer holding the output data.
* This must be able to hold \p size Bytes.
* This pointer can be \c NULL if `size == 0`.
*
* \return \c 0 on success.
* \return A negative error code on failure.
*/
int mbedtls_chacha20_crypt( const unsigned char key[32],
const unsigned char nonce[12],
uint32_t counter,
size_t size,
const unsigned char* input,
unsigned char* output );

#if defined(MBEDTLS_SELF_TEST)
/**
* \brief The ChaCha20 checkup routine.
*
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_chacha20_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST */

#ifdef __cplusplus
}
#endif

#endif /* MBEDTLS_CHACHA20_H */
358 Externals/mbedtls/include/mbedtls/chachapoly.h
View file

Large diffs are not rendered by default.

74 Externals/mbedtls/include/mbedtls/check_config.h
View file
@@ -2,8 +2,9 @@
* \file check_config.h
*
* \brief Consistency checks for configuration options
*
* Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
*/
/*
* Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -77,11 +78,20 @@
#error "MBEDTLS_DHM_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT) && !defined(MBEDTLS_SSL_TRUNCATED_HMAC)
#error "MBEDTLS_SSL_TRUNCATED_HMAC_COMPAT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_CMAC_C) && \
!defined(MBEDTLS_AES_C) && !defined(MBEDTLS_DES_C)
#error "MBEDTLS_CMAC_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_NIST_KW_C) && \
( !defined(MBEDTLS_AES_C) || !defined(MBEDTLS_CIPHER_C) )
#error "MBEDTLS_NIST_KW_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECDH_C) && !defined(MBEDTLS_ECP_C)
#error "MBEDTLS_ECDH_C defined, but not all prerequisites"
#endif
@@ -98,6 +108,17 @@
#error "MBEDTLS_ECJPAKE_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_RESTARTABLE) && \
( defined(MBEDTLS_ECDH_COMPUTE_SHARED_ALT) || \
defined(MBEDTLS_ECDH_GEN_PUBLIC_ALT) || \
defined(MBEDTLS_ECDSA_SIGN_ALT) || \
defined(MBEDTLS_ECDSA_VERIFY_ALT) || \
defined(MBEDTLS_ECDSA_GENKEY_ALT) || \
defined(MBEDTLS_ECP_INTERNAL_ALT) || \
defined(MBEDTLS_ECP_ALT) )
#error "MBEDTLS_ECP_RESTARTABLE defined, but it cannot coexist with an alternative ECP implementation"
#endif

#if defined(MBEDTLS_ECDSA_DETERMINISTIC) && !defined(MBEDTLS_HMAC_DRBG_C)
#error "MBEDTLS_ECDSA_DETERMINISTIC defined, but not all prerequisites"
#endif
@@ -117,6 +138,10 @@
#error "MBEDTLS_ECP_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_PK_PARSE_C) && !defined(MBEDTLS_ASN1_PARSE_C)
#error "MBEDTLS_PK_PARSE_C defined, but not all prerequesites"
#endif

#if defined(MBEDTLS_ENTROPY_C) && (!defined(MBEDTLS_SHA512_C) && \
!defined(MBEDTLS_SHA256_C))
#error "MBEDTLS_ENTROPY_C defined, but not all prerequisites"
@@ -150,10 +175,46 @@
#error "MBEDTLS_GCM_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_RANDOMIZE_JAC_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT)
#error "MBEDTLS_ECP_RANDOMIZE_JAC_ALT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_ADD_MIXED_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT)
#error "MBEDTLS_ECP_ADD_MIXED_ALT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_DOUBLE_JAC_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT)
#error "MBEDTLS_ECP_DOUBLE_JAC_ALT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT)
#error "MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_NORMALIZE_JAC_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT)
#error "MBEDTLS_ECP_NORMALIZE_JAC_ALT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT)
#error "MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_RANDOMIZE_MXZ_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT)
#error "MBEDTLS_ECP_RANDOMIZE_MXZ_ALT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_ECP_NORMALIZE_MXZ_ALT) && !defined(MBEDTLS_ECP_INTERNAL_ALT)
#error "MBEDTLS_ECP_NORMALIZE_MXZ_ALT defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_HAVEGE_C) && !defined(MBEDTLS_TIMING_C)
#error "MBEDTLS_HAVEGE_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_HKDF_C) && !defined(MBEDTLS_MD_C)
#error "MBEDTLS_HKDF_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_HMAC_DRBG_C) && !defined(MBEDTLS_MD_C)
#error "MBEDTLS_HMAC_DRBG_C defined, but not all prerequisites"
#endif
@@ -618,6 +679,15 @@
#error "MBEDTLS_X509_CSR_WRITE_C defined, but not all prerequisites"
#endif

#if defined(MBEDTLS_HAVE_INT32) && defined(MBEDTLS_HAVE_INT64)
#error "MBEDTLS_HAVE_INT32 and MBEDTLS_HAVE_INT64 cannot be defined simultaneously"
#endif /* MBEDTLS_HAVE_INT32 && MBEDTLS_HAVE_INT64 */

#if ( defined(MBEDTLS_HAVE_INT32) || defined(MBEDTLS_HAVE_INT64) ) && \
defined(MBEDTLS_HAVE_ASM)
#error "MBEDTLS_HAVE_INT32/MBEDTLS_HAVE_INT64 and MBEDTLS_HAVE_ASM cannot be defined simultaneously"
#endif /* (MBEDTLS_HAVE_INT32 || MBEDTLS_HAVE_INT64) && MBEDTLS_HAVE_ASM */

/*
* Avoid warning from -pedantic. This is a convenient place for this
* workaround since this is included by every single file before the
929 Externals/mbedtls/include/mbedtls/cipher.h
View file

Large diffs are not rendered by default.

18 Externals/mbedtls/include/mbedtls/cipher_internal.h
View file
@@ -4,7 +4,8 @@
* \brief Cipher wrappers.
*
* \author Adriaan de Jong <dejong@fox-it.com>
*
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -63,13 +64,28 @@ struct mbedtls_cipher_base_t
unsigned char *output );
#endif

#if defined(MBEDTLS_CIPHER_MODE_OFB)
/** Encrypt using OFB (Full length) */
int (*ofb_func)( void *ctx, size_t length, size_t *iv_off,
unsigned char *iv,
const unsigned char *input,
unsigned char *output );
#endif

#if defined(MBEDTLS_CIPHER_MODE_CTR)
/** Encrypt using CTR */
int (*ctr_func)( void *ctx, size_t length, size_t *nc_off,
unsigned char *nonce_counter, unsigned char *stream_block,
const unsigned char *input, unsigned char *output );
#endif

#if defined(MBEDTLS_CIPHER_MODE_XTS)
/** Encrypt or decrypt using XTS. */
int (*xts_func)( void *ctx, mbedtls_operation_t mode, size_t length,
const unsigned char data_unit[16],
const unsigned char *input, unsigned char *output );
#endif

#if defined(MBEDTLS_CIPHER_MODE_STREAM)
/** Encrypt using STREAM */
int (*stream_func)( void *ctx, size_t length,
183 Externals/mbedtls/include/mbedtls/cmac.h
View file
@@ -1,10 +1,13 @@
/**
* \file cmac.h
*
* \brief Cipher-based Message Authentication Code (CMAC) Mode for
* Authentication
* \brief This file contains CMAC definitions and functions.
*
* Copyright (C) 2015-2016, ARM Limited, All Rights Reserved
* The Cipher-based Message Authentication Code (CMAC) Mode for
* Authentication is defined in <em>RFC-4493: The AES-CMAC Algorithm</em>.
*/
/*
* Copyright (C) 2015-2018, Arm Limited (or its affiliates), All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -19,113 +22,151 @@
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
* This file is part of Mbed TLS (https://tls.mbed.org)
*/

#ifndef MBEDTLS_CMAC_H
#define MBEDTLS_CMAC_H

#include "mbedtls/cipher.h"
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include "cipher.h"

#ifdef __cplusplus
extern "C" {
#endif

/* MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED -0x007A /**< CMAC hardware accelerator failed. */

#define MBEDTLS_AES_BLOCK_SIZE 16
#define MBEDTLS_DES3_BLOCK_SIZE 8

#if defined(MBEDTLS_AES_C)
#define MBEDTLS_CIPHER_BLKSIZE_MAX 16 /* longest used by CMAC is AES */
#define MBEDTLS_CIPHER_BLKSIZE_MAX 16 /**< The longest block used by CMAC is that of AES. */
#else
#define MBEDTLS_CIPHER_BLKSIZE_MAX 8 /* longest used by CMAC is 3DES */
#define MBEDTLS_CIPHER_BLKSIZE_MAX 8 /**< The longest block used by CMAC is that of 3DES. */
#endif

#if !defined(MBEDTLS_CMAC_ALT)

/**
* CMAC context structure - Contains internal state information only
* The CMAC context structure.
*/
struct mbedtls_cmac_context_t
{
/** Internal state of the CMAC algorithm */
/** The internal state of the CMAC algorithm. */
unsigned char state[MBEDTLS_CIPHER_BLKSIZE_MAX];

/** Unprocessed data - either data that was not block aligned and is still
* pending to be processed, or the final block */
* pending processing, or the final block. */
unsigned char unprocessed_block[MBEDTLS_CIPHER_BLKSIZE_MAX];

/** Length of data pending to be processed */
/** The length of data pending processing. */
size_t unprocessed_len;
};

#else /* !MBEDTLS_CMAC_ALT */
#include "cmac_alt.h"
#endif /* !MBEDTLS_CMAC_ALT */

/**
* \brief Set the CMAC key and prepare to authenticate the input
* data.
* Should be called with an initialised cipher context.
*
* \param ctx Cipher context
* \param key CMAC key
* \param keybits length of the CMAC key in bits
* (must be acceptable by the cipher)
*
* \return 0 if successful, or a cipher specific error code
* \brief This function sets the CMAC key, and prepares to authenticate
* the input data.
* Must be called with an initialized cipher context.
*
* \param ctx The cipher context used for the CMAC operation, initialized
* as one of the following types: MBEDTLS_CIPHER_AES_128_ECB,
* MBEDTLS_CIPHER_AES_192_ECB, MBEDTLS_CIPHER_AES_256_ECB,
* or MBEDTLS_CIPHER_DES_EDE3_ECB.
* \param key The CMAC key.
* \param keybits The length of the CMAC key in bits.
* Must be supported by the cipher.
*
* \return \c 0 on success.
* \return A cipher-specific error code on failure.
*/
int mbedtls_cipher_cmac_starts( mbedtls_cipher_context_t *ctx,
const unsigned char *key, size_t keybits );

/**
* \brief Generic CMAC process buffer.
* Called between mbedtls_cipher_cmac_starts() or
* mbedtls_cipher_cmac_reset() and
* mbedtls_cipher_cmac_finish().
* May be called repeatedly.
*
* \param ctx CMAC context
* \param input buffer holding the data
* \param ilen length of the input data
*
* \returns 0 on success, MBEDTLS_ERR_MD_BAD_INPUT_DATA if parameter
* verification fails.
* \brief This function feeds an input buffer into an ongoing CMAC
* computation.
*
* It is called between mbedtls_cipher_cmac_starts() or
* mbedtls_cipher_cmac_reset(), and mbedtls_cipher_cmac_finish().
* Can be called repeatedly.
*
* \param ctx The cipher context used for the CMAC operation.
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA
* if parameter verification fails.
*/
int mbedtls_cipher_cmac_update( mbedtls_cipher_context_t *ctx,
const unsigned char *input, size_t ilen );

/**
* \brief Output CMAC.
* Called after mbedtls_cipher_cmac_update().
* Usually followed by mbedtls_cipher_cmac_reset(), then
* mbedtls_cipher_cmac_starts(), or mbedtls_cipher_free().
* \brief This function finishes the CMAC operation, and writes
* the result to the output buffer.
*
* \param ctx CMAC context
* \param output Generic CMAC checksum result
* It is called after mbedtls_cipher_cmac_update().
* It can be followed by mbedtls_cipher_cmac_reset() and
* mbedtls_cipher_cmac_update(), or mbedtls_cipher_free().
*
* \returns 0 on success, MBEDTLS_ERR_MD_BAD_INPUT_DATA if parameter
* verification fails.
* \param ctx The cipher context used for the CMAC operation.
* \param output The output buffer for the CMAC checksum result.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA
* if parameter verification fails.
*/
int mbedtls_cipher_cmac_finish( mbedtls_cipher_context_t *ctx,
unsigned char *output );

/**
* \brief Prepare to authenticate a new message with the same key.
* Called after mbedtls_cipher_cmac_finish() and before
* mbedtls_cipher_cmac_update().
* \brief This function prepares the authentication of another
* message with the same key as the previous CMAC
* operation.
*
* It is called after mbedtls_cipher_cmac_finish()
* and before mbedtls_cipher_cmac_update().
*
* \param ctx CMAC context to be reset
* \param ctx The cipher context used for the CMAC operation.
*
* \returns 0 on success, MBEDTLS_ERR_MD_BAD_INPUT_DATA if parameter
* verification fails.
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA
* if parameter verification fails.
*/
int mbedtls_cipher_cmac_reset( mbedtls_cipher_context_t *ctx );

/**
* \brief Output = Generic_CMAC( hmac key, input buffer )
* \brief This function calculates the full generic CMAC
* on the input buffer with the provided key.
*
* \param cipher_info message digest info
* \param key CMAC key
* \param keylen length of the CMAC key in bits
* \param input buffer holding the data
* \param ilen length of the input data
* \param output Generic CMAC-result
* The function allocates the context, performs the
* calculation, and frees the context.
*
* \returns 0 on success, MBEDTLS_ERR_MD_BAD_INPUT_DATA if parameter
* verification fails.
* The CMAC result is calculated as
* output = generic CMAC(cmac key, input buffer).
*
*
* \param cipher_info The cipher information.
* \param key The CMAC key.
* \param keylen The length of the CMAC key in bits.
* \param input The buffer holding the input data.
* \param ilen The length of the input data.
* \param output The buffer for the generic CMAC result.
*
* \return \c 0 on success.
* \return #MBEDTLS_ERR_MD_BAD_INPUT_DATA
* if parameter verification fails.
*/
int mbedtls_cipher_cmac( const mbedtls_cipher_info_t *cipher_info,
const unsigned char *key, size_t keylen,
@@ -134,16 +175,21 @@ int mbedtls_cipher_cmac( const mbedtls_cipher_info_t *cipher_info,

#if defined(MBEDTLS_AES_C)
/**
* \brief AES-CMAC-128-PRF
* Implementation of (AES-CMAC-PRF-128), as defined in RFC 4615
*
* \param key PRF key
* \param key_len PRF key length in bytes
* \param input buffer holding the input data
* \param in_len length of the input data in bytes
* \param output buffer holding the generated pseudorandom output (16 bytes)
*
* \return 0 if successful
* \brief This function implements the AES-CMAC-PRF-128 pseudorandom
* function, as defined in
* <em>RFC-4615: The Advanced Encryption Standard-Cipher-based
* Message Authentication Code-Pseudo-Random Function-128
* (AES-CMAC-PRF-128) Algorithm for the Internet Key
* Exchange Protocol (IKE).</em>
*
* \param key The key to use.
* \param key_len The key length in Bytes.
* \param input The buffer holding the input data.
* \param in_len The length of the input data in Bytes.
* \param output The buffer holding the generated 16 Bytes of
* pseudorandom output.
*
* \return \c 0 on success.
*/
int mbedtls_aes_cmac_prf_128( const unsigned char *key, size_t key_len,
const unsigned char *input, size_t in_len,
@@ -152,9 +198,10 @@ int mbedtls_aes_cmac_prf_128( const unsigned char *key, size_t key_len,

#if defined(MBEDTLS_SELF_TEST) && ( defined(MBEDTLS_AES_C) || defined(MBEDTLS_DES_C) )
/**
* \brief Checkup routine
* \brief The CMAC checkup routine.
*
* \return 0 if successful, or 1 if the test failed
* \return \c 0 on success.
* \return \c 1 on failure.
*/
int mbedtls_cmac_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST && ( MBEDTLS_AES_C || MBEDTLS_DES_C ) */
125 Externals/mbedtls/include/mbedtls/compat-1.3.h
View file

Large diffs are not rendered by default.

836 Externals/mbedtls/include/mbedtls/config.h
View file

Large diffs are not rendered by default.

324 Externals/mbedtls/include/mbedtls/ctr_drbg.h
View file

Large diffs are not rendered by default.

39 Externals/mbedtls/include/mbedtls/debug.h
View file
@@ -2,7 +2,8 @@
* \file debug.h
*
* \brief Functions for controlling and providing debug output from the library.
*
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -64,6 +65,11 @@
mbedtls_debug_print_crt( ssl, level, __FILE__, __LINE__, text, crt )
#endif

#if defined(MBEDTLS_ECDH_C)
#define MBEDTLS_SSL_DEBUG_ECDH( level, ecdh, attr ) \
mbedtls_debug_printf_ecdh( ssl, level, __FILE__, __LINE__, ecdh, attr )
#endif

#else /* MBEDTLS_DEBUG_C */

#define MBEDTLS_SSL_DEBUG_MSG( level, args ) do { } while( 0 )
@@ -72,6 +78,7 @@
#define MBEDTLS_SSL_DEBUG_MPI( level, text, X ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_ECP( level, text, X ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_CRT( level, text, crt ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_ECDH( level, ecdh, attr ) do { } while( 0 )

#endif /* MBEDTLS_DEBUG_C */

@@ -220,6 +227,36 @@ void mbedtls_debug_print_crt( const mbedtls_ssl_context *ssl, int level,
const char *text, const mbedtls_x509_crt *crt );
#endif

#if defined(MBEDTLS_ECDH_C)
typedef enum
{
MBEDTLS_DEBUG_ECDH_Q,
MBEDTLS_DEBUG_ECDH_QP,
MBEDTLS_DEBUG_ECDH_Z,
} mbedtls_debug_ecdh_attr;

/**
* \brief Print a field of the ECDH structure in the SSL context to the debug
* output. This function is always used through the
* MBEDTLS_SSL_DEBUG_ECDH() macro, which supplies the ssl context, file
* and line number parameters.
*
* \param ssl SSL context
* \param level error level of the debug message
* \param file file the error has occurred in
* \param line line number the error has occurred in
* \param ecdh the ECDH context
* \param attr the identifier of the attribute being output
*
* \attention This function is intended for INTERNAL usage within the
* library only.
*/
void mbedtls_debug_printf_ecdh( const mbedtls_ssl_context *ssl, int level,
const char *file, int line,
const mbedtls_ecdh_context *ecdh,
mbedtls_debug_ecdh_attr attr );
#endif

#ifdef __cplusplus
}
#endif
82 Externals/mbedtls/include/mbedtls/des.h
View file
@@ -3,6 +3,11 @@
*
* \brief DES block cipher
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -19,6 +24,7 @@
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*
*/
#ifndef MBEDTLS_DES_H
#define MBEDTLS_DES_H
@@ -37,20 +43,27 @@

#define MBEDTLS_ERR_DES_INVALID_INPUT_LENGTH -0x0032 /**< The data input has an invalid length. */

#define MBEDTLS_DES_KEY_SIZE 8
/* MBEDTLS_ERR_DES_HW_ACCEL_FAILED is deprecated and should not be used. */
#define MBEDTLS_ERR_DES_HW_ACCEL_FAILED -0x0033 /**< DES hardware accelerator failed. */

#if !defined(MBEDTLS_DES_ALT)
// Regular implementation
//
#define MBEDTLS_DES_KEY_SIZE 8

#ifdef __cplusplus
extern "C" {
#endif

#if !defined(MBEDTLS_DES_ALT)
// Regular implementation
//

/**
* \brief DES context structure
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
typedef struct
typedef struct mbedtls_des_context
{
uint32_t sk[32]; /*!< DES subkeys */
}
@@ -59,23 +72,35 @@ mbedtls_des_context;
/**
* \brief Triple-DES context structure
*/
typedef struct
typedef struct mbedtls_des3_context
{
uint32_t sk[96]; /*!< 3DES subkeys */
}
mbedtls_des3_context;

#else /* MBEDTLS_DES_ALT */
#include "des_alt.h"
#endif /* MBEDTLS_DES_ALT */

/**
* \brief Initialize DES context
*
* \param ctx DES context to be initialized
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
void mbedtls_des_init( mbedtls_des_context *ctx );

/**
* \brief Clear DES context
*
* \param ctx DES context to be cleared
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
void mbedtls_des_free( mbedtls_des_context *ctx );

@@ -100,6 +125,10 @@ void mbedtls_des3_free( mbedtls_des3_context *ctx );
* a parity bit to allow verification.
*
* \param key 8-byte secret key
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
void mbedtls_des_key_set_parity( unsigned char key[MBEDTLS_DES_KEY_SIZE] );

@@ -112,6 +141,10 @@ void mbedtls_des_key_set_parity( unsigned char key[MBEDTLS_DES_KEY_SIZE] );
* \param key 8-byte secret key
*
* \return 0 is parity was ok, 1 if parity was not correct.
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
int mbedtls_des_key_check_key_parity( const unsigned char key[MBEDTLS_DES_KEY_SIZE] );

@@ -121,6 +154,10 @@ int mbedtls_des_key_check_key_parity( const unsigned char key[MBEDTLS_DES_KEY_SI
* \param key 8-byte secret key
*
* \return 0 if no weak key was found, 1 if a weak key was identified.
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
int mbedtls_des_key_check_weak( const unsigned char key[MBEDTLS_DES_KEY_SIZE] );

@@ -131,6 +168,10 @@ int mbedtls_des_key_check_weak( const unsigned char key[MBEDTLS_DES_KEY_SIZE] );
* \param key 8-byte secret key
*
* \return 0
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
int mbedtls_des_setkey_enc( mbedtls_des_context *ctx, const unsigned char key[MBEDTLS_DES_KEY_SIZE] );

@@ -141,6 +182,10 @@ int mbedtls_des_setkey_enc( mbedtls_des_context *ctx, const unsigned char key[MB
* \param key 8-byte secret key
*
* \return 0
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
int mbedtls_des_setkey_dec( mbedtls_des_context *ctx, const unsigned char key[MBEDTLS_DES_KEY_SIZE] );

@@ -196,6 +241,10 @@ int mbedtls_des3_set3key_dec( mbedtls_des3_context *ctx,
* \param output 64-bit output block
*
* \return 0 if successful
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
int mbedtls_des_crypt_ecb( mbedtls_des_context *ctx,
const unsigned char input[8],
@@ -219,6 +268,10 @@ int mbedtls_des_crypt_ecb( mbedtls_des_context *ctx,
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
int mbedtls_des_crypt_cbc( mbedtls_des_context *ctx,
int mode,
@@ -277,20 +330,15 @@ int mbedtls_des3_crypt_cbc( mbedtls_des3_context *ctx,
*
* \param SK Round keys
* \param key Base key
*
* \warning DES is considered a weak cipher and its use constitutes a
* security risk. We recommend considering stronger ciphers
* instead.
*/
void mbedtls_des_setkey( uint32_t SK[32],
const unsigned char key[MBEDTLS_DES_KEY_SIZE] );
#ifdef __cplusplus
}
#endif

#else /* MBEDTLS_DES_ALT */
#include "des_alt.h"
#endif /* MBEDTLS_DES_ALT */

#ifdef __cplusplus
extern "C" {
#endif
#if defined(MBEDTLS_SELF_TEST)

/**
* \brief Checkup routine
@@ -299,6 +347,8 @@ extern "C" {
*/
int mbedtls_des_self_test( int verbose );

#endif /* MBEDTLS_SELF_TEST */

#ifdef __cplusplus
}
#endif
1,155 Externals/mbedtls/include/mbedtls/dhm.h
View file

Large diffs are not rendered by default.

418 Externals/mbedtls/include/mbedtls/ecdh.h
View file

Large diffs are not rendered by default.

517 Externals/mbedtls/include/mbedtls/ecdsa.h
View file

Large diffs are not rendered by default.

163 Externals/mbedtls/include/mbedtls/ecjpake.h
View file
@@ -2,7 +2,8 @@
* \file ecjpake.h
*
* \brief Elliptic curve J-PAKE
*
*/
/*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -39,6 +40,11 @@
* The payloads are serialized in a way suitable for use in TLS, but could
* also be use outside TLS.
*/
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include "ecp.h"
#include "md.h"
@@ -55,6 +61,7 @@ typedef enum {
MBEDTLS_ECJPAKE_SERVER, /**< Server */
} mbedtls_ecjpake_role;

#if !defined(MBEDTLS_ECJPAKE_ALT)
/**
* EC J-PAKE context structure.
*
@@ -66,7 +73,7 @@ typedef enum {
* convetion from the Thread v1.0 spec. Correspondance is indicated in the
* description as a pair C: client name, S: server name
*/
typedef struct
typedef struct mbedtls_ecjpake_context
{
const mbedtls_md_info_t *md_info; /**< Hash to use */
mbedtls_ecp_group grp; /**< Elliptic curve */
@@ -85,29 +92,38 @@ typedef struct
mbedtls_mpi s; /**< Pre-shared secret (passphrase) */
} mbedtls_ecjpake_context;

#else /* MBEDTLS_ECJPAKE_ALT */
#include "ecjpake_alt.h"
#endif /* MBEDTLS_ECJPAKE_ALT */

/**
* \brief Initialize a context
* (just makes it ready for setup() or free()).
* \brief Initialize an ECJPAKE context.
*
* \param ctx context to initialize
* \param ctx The ECJPAKE context to initialize.
* This must not be \c NULL.
*/
void mbedtls_ecjpake_init( mbedtls_ecjpake_context *ctx );

/**
* \brief Set up a context for use
* \brief Set up an ECJPAKE context for use.
*
* \note Currently the only values for hash/curve allowed by the
* standard are MBEDTLS_MD_SHA256/MBEDTLS_ECP_DP_SECP256R1.
* standard are #MBEDTLS_MD_SHA256/#MBEDTLS_ECP_DP_SECP256R1.
*
* \param ctx context to set up
* \param role Our role: client or server
* \param hash hash function to use (MBEDTLS_MD_XXX)
* \param curve elliptic curve identifier (MBEDTLS_ECP_DP_XXX)
* \param secret pre-shared secret (passphrase)
* \param len length of the shared secret
* \param ctx The ECJPAKE context to set up. This must be initialized.
* \param role The role of the caller. This must be either
* #MBEDTLS_ECJPAKE_CLIENT or #MBEDTLS_ECJPAKE_SERVER.
* \param hash The identifier of the hash function to use,
* for example #MBEDTLS_MD_SHA256.
* \param curve The identifier of the elliptic curve to use,
* for example #MBEDTLS_ECP_DP_SECP256R1.
* \param secret The pre-shared secret (passphrase). This must be
* a readable buffer of length \p len Bytes. It need
* only be valid for the duration of this call.
* \param len The length of the pre-shared secret \p secret.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_setup( mbedtls_ecjpake_context *ctx,
mbedtls_ecjpake_role role,
@@ -116,30 +132,35 @@ int mbedtls_ecjpake_setup( mbedtls_ecjpake_context *ctx,
const unsigned char *secret,
size_t len );

/*
* \brief Check if a context is ready for use
/**
* \brief Check if an ECJPAKE context is ready for use.
*
* \param ctx Context to check
* \param ctx The ECJPAKE context to check. This must be
* initialized.
*
* \return 0 if the context is ready for use,
* MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise
* \return \c 0 if the context is ready for use.
* \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise.
*/
int mbedtls_ecjpake_check( const mbedtls_ecjpake_context *ctx );

/**
* \brief Generate and write the first round message
* (TLS: contents of the Client/ServerHello extension,
* excluding extension type and length bytes)
* excluding extension type and length bytes).
*
* \param ctx Context to use
* \param buf Buffer to write the contents to
* \param len Buffer size
* \param olen Will be updated with the number of bytes written
* \param f_rng RNG function
* \param p_rng RNG parameter
* \param ctx The ECJPAKE context to use. This must be
* initialized and set up.
* \param buf The buffer to write the contents to. This must be a
* writable buffer of length \p len Bytes.
* \param len The length of \p buf in Bytes.
* \param olen The address at which to store the total number
* of Bytes written to \p buf. This must not be \c NULL.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG parameter to be passed to \p f_rng. This
* may be \c NULL if \p f_rng doesn't use a context.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_write_round_one( mbedtls_ecjpake_context *ctx,
unsigned char *buf, size_t len, size_t *olen,
@@ -149,32 +170,38 @@ int mbedtls_ecjpake_write_round_one( mbedtls_ecjpake_context *ctx,
/**
* \brief Read and process the first round message
* (TLS: contents of the Client/ServerHello extension,
* excluding extension type and length bytes)
* excluding extension type and length bytes).
*
* \param ctx Context to use
* \param buf Pointer to extension contents
* \param len Extension length
* \param ctx The ECJPAKE context to use. This must be initialized
* and set up.
* \param buf The buffer holding the first round message. This must
* be a readable buffer of length \p len Bytes.
* \param len The length in Bytes of \p buf.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_read_round_one( mbedtls_ecjpake_context *ctx,
const unsigned char *buf,
size_t len );

/**
* \brief Generate and write the second round message
* (TLS: contents of the Client/ServerKeyExchange)
* (TLS: contents of the Client/ServerKeyExchange).
*
* \param ctx Context to use
* \param buf Buffer to write the contents to
* \param len Buffer size
* \param olen Will be updated with the number of bytes written
* \param f_rng RNG function
* \param p_rng RNG parameter
* \param ctx The ECJPAKE context to use. This must be initialized,
* set up, and already have performed round one.
* \param buf The buffer to write the round two contents to.
* This must be a writable buffer of length \p len Bytes.
* \param len The size of \p buf in Bytes.
* \param olen The address at which to store the total number of Bytes
* written to \p buf. This must not be \c NULL.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG parameter to be passed to \p f_rng. This
* may be \c NULL if \p f_rng doesn't use a context.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_write_round_two( mbedtls_ecjpake_context *ctx,
unsigned char *buf, size_t len, size_t *olen,
@@ -183,56 +210,68 @@ int mbedtls_ecjpake_write_round_two( mbedtls_ecjpake_context *ctx,

/**
* \brief Read and process the second round message
* (TLS: contents of the Client/ServerKeyExchange)
* (TLS: contents of the Client/ServerKeyExchange).
*
* \param ctx Context to use
* \param buf Pointer to the message
* \param len Message length
* \param ctx The ECJPAKE context to use. This must be initialized
* and set up and already have performed round one.
* \param buf The buffer holding the second round message. This must
* be a readable buffer of length \p len Bytes.
* \param len The length in Bytes of \p buf.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_read_round_two( mbedtls_ecjpake_context *ctx,
const unsigned char *buf,
size_t len );

/**
* \brief Derive the shared secret
* (TLS: Pre-Master Secret)
* (TLS: Pre-Master Secret).
*
* \param ctx Context to use
* \param buf Buffer to write the contents to
* \param len Buffer size
* \param olen Will be updated with the number of bytes written
* \param f_rng RNG function
* \param p_rng RNG parameter
* \param ctx The ECJPAKE context to use. This must be initialized,
* set up and have performed both round one and two.
* \param buf The buffer to write the derived secret to. This must
* be a writable buffer of length \p len Bytes.
* \param len The length of \p buf in Bytes.
* \param olen The address at which to store the total number of Bytes
* written to \p buf. This must not be \c NULL.
* \param f_rng The RNG function to use. This must not be \c NULL.
* \param p_rng The RNG parameter to be passed to \p f_rng. This
* may be \c NULL if \p f_rng doesn't use a context.
*
* \return 0 if successfull,
* a negative error code otherwise
* \return \c 0 if successful.
* \return A negative error code on failure.
*/
int mbedtls_ecjpake_derive_secret( mbedtls_ecjpake_context *ctx,
unsigned char *buf, size_t len, size_t *olen,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );

/**
* \brief Free a context's content
* \brief This clears an ECJPAKE context and frees any
* embedded data structure.
*
* \param ctx context to free
* \param ctx The ECJPAKE context to free. This may be \c NULL,
* in which case this function does nothing. If it is not
* \c NULL, it must point to an initialized ECJPAKE context.
*/
void mbedtls_ecjpake_free( mbedtls_ecjpake_context *ctx );

#if defined(MBEDTLS_SELF_TEST)

/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if a test failed
*/
int mbedtls_ecjpake_self_test( int verbose );
#endif

#endif /* MBEDTLS_SELF_TEST */

#ifdef __cplusplus
}
#endif


#endif /* ecjpake.h */
1,191 Externals/mbedtls/include/mbedtls/ecp.h
View file

Large diffs are not rendered by default.

299 Externals/mbedtls/include/mbedtls/ecp_internal.h
View file
@@ -0,0 +1,299 @@
/**
* \file ecp_internal.h
*
* \brief Function declarations for alternative implementation of elliptic curve
* point arithmetic.
*/
/*
* Copyright (C) 2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/

/*
* References:
*
* [1] BERNSTEIN, Daniel J. Curve25519: new Diffie-Hellman speed records.
* <http://cr.yp.to/ecdh/curve25519-20060209.pdf>
*
* [2] CORON, Jean-S'ebastien. Resistance against differential power analysis
* for elliptic curve cryptosystems. In : Cryptographic Hardware and
* Embedded Systems. Springer Berlin Heidelberg, 1999. p. 292-302.
* <http://link.springer.com/chapter/10.1007/3-540-48059-5_25>
*
* [3] HEDABOU, Mustapha, PINEL, Pierre, et B'EN'ETEAU, Lucien. A comb method to
* render ECC resistant against Side Channel Attacks. IACR Cryptology
* ePrint Archive, 2004, vol. 2004, p. 342.
* <http://eprint.iacr.org/2004/342.pdf>
*
* [4] Certicom Research. SEC 2: Recommended Elliptic Curve Domain Parameters.
* <http://www.secg.org/sec2-v2.pdf>
*
* [5] HANKERSON, Darrel, MENEZES, Alfred J., VANSTONE, Scott. Guide to Elliptic
* Curve Cryptography.
*
* [6] Digital Signature Standard (DSS), FIPS 186-4.
* <http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-4.pdf>
*
* [7] Elliptic Curve Cryptography (ECC) Cipher Suites for Transport Layer
* Security (TLS), RFC 4492.
* <https://tools.ietf.org/search/rfc4492>
*
* [8] <http://www.hyperelliptic.org/EFD/g1p/auto-shortw-jacobian.html>
*
* [9] COHEN, Henri. A Course in Computational Algebraic Number Theory.
* Springer Science & Business Media, 1 Aug 2000
*/

#ifndef MBEDTLS_ECP_INTERNAL_H
#define MBEDTLS_ECP_INTERNAL_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#if defined(MBEDTLS_ECP_INTERNAL_ALT)

/**
* \brief Indicate if the Elliptic Curve Point module extension can
* handle the group.
*
* \param grp The pointer to the elliptic curve group that will be the
* basis of the cryptographic computations.
*
* \return Non-zero if successful.
*/
unsigned char mbedtls_internal_ecp_grp_capable( const mbedtls_ecp_group *grp );

/**
* \brief Initialise the Elliptic Curve Point module extension.
*
* If mbedtls_internal_ecp_grp_capable returns true for a
* group, this function has to be able to initialise the
* module for it.
*
* This module can be a driver to a crypto hardware
* accelerator, for which this could be an initialise function.
*
* \param grp The pointer to the group the module needs to be
* initialised for.
*
* \return 0 if successful.
*/
int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp );

/**
* \brief Frees and deallocates the Elliptic Curve Point module
* extension.
*
* \param grp The pointer to the group the module was initialised for.
*/
void mbedtls_internal_ecp_free( const mbedtls_ecp_group *grp );

#if defined(ECP_SHORTWEIERSTRASS)

#if defined(MBEDTLS_ECP_RANDOMIZE_JAC_ALT)
/**
* \brief Randomize jacobian coordinates:
* (X, Y, Z) -> (l^2 X, l^3 Y, l Z) for random l.
*
* \param grp Pointer to the group representing the curve.
*
* \param pt The point on the curve to be randomised, given with Jacobian
* coordinates.
*
* \param f_rng A function pointer to the random number generator.
*
* \param p_rng A pointer to the random number generator state.
*
* \return 0 if successful.
*/
int mbedtls_internal_ecp_randomize_jac( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *pt, int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#endif

#if defined(MBEDTLS_ECP_ADD_MIXED_ALT)
/**
* \brief Addition: R = P + Q, mixed affine-Jacobian coordinates.
*
* The coordinates of Q must be normalized (= affine),
* but those of P don't need to. R is not normalized.
*
* This function is used only as a subrutine of
* ecp_mul_comb().
*
* Special cases: (1) P or Q is zero, (2) R is zero,
* (3) P == Q.
* None of these cases can happen as intermediate step in
* ecp_mul_comb():
* - at each step, P, Q and R are multiples of the base
* point, the factor being less than its order, so none of
* them is zero;
* - Q is an odd multiple of the base point, P an even
* multiple, due to the choice of precomputed points in the
* modified comb method.
* So branches for these cases do not leak secret information.
*
* We accept Q->Z being unset (saving memory in tables) as
* meaning 1.
*
* Cost in field operations if done by [5] 3.22:
* 1A := 8M + 3S
*
* \param grp Pointer to the group representing the curve.
*
* \param R Pointer to a point structure to hold the result.
*
* \param P Pointer to the first summand, given with Jacobian
* coordinates
*
* \param Q Pointer to the second summand, given with affine
* coordinates.
*
* \return 0 if successful.
*/
int mbedtls_internal_ecp_add_mixed( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *R, const mbedtls_ecp_point *P,
const mbedtls_ecp_point *Q );
#endif

/**
* \brief Point doubling R = 2 P, Jacobian coordinates.
*
* Cost: 1D := 3M + 4S (A == 0)
* 4M + 4S (A == -3)
* 3M + 6S + 1a otherwise
* when the implementation is based on the "dbl-1998-cmo-2"
* doubling formulas in [8] and standard optimizations are
* applied when curve parameter A is one of { 0, -3 }.
*
* \param grp Pointer to the group representing the curve.
*
* \param R Pointer to a point structure to hold the result.
*
* \param P Pointer to the point that has to be doubled, given with
* Jacobian coordinates.
*
* \return 0 if successful.
*/
#if defined(MBEDTLS_ECP_DOUBLE_JAC_ALT)
int mbedtls_internal_ecp_double_jac( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *R, const mbedtls_ecp_point *P );
#endif

/**
* \brief Normalize jacobian coordinates of an array of (pointers to)
* points.
*
* Using Montgomery's trick to perform only one inversion mod P
* the cost is:
* 1N(t) := 1I + (6t - 3)M + 1S
* (See for example Algorithm 10.3.4. in [9])
*
* This function is used only as a subrutine of
* ecp_mul_comb().
*
* Warning: fails (returning an error) if one of the points is
* zero!
* This should never happen, see choice of w in ecp_mul_comb().
*
* \param grp Pointer to the group representing the curve.
*
* \param T Array of pointers to the points to normalise.
*
* \param t_len Number of elements in the array.
*
* \return 0 if successful,
* an error if one of the points is zero.
*/
#if defined(MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT)
int mbedtls_internal_ecp_normalize_jac_many( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *T[], size_t t_len );
#endif

/**
* \brief Normalize jacobian coordinates so that Z == 0 || Z == 1.
*
* Cost in field operations if done by [5] 3.2.1:
* 1N := 1I + 3M + 1S
*
* \param grp Pointer to the group representing the curve.
*
* \param pt pointer to the point to be normalised. This is an
* input/output parameter.
*
* \return 0 if successful.
*/
#if defined(MBEDTLS_ECP_NORMALIZE_JAC_ALT)
int mbedtls_internal_ecp_normalize_jac( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *pt );
#endif

#endif /* ECP_SHORTWEIERSTRASS */

#if defined(ECP_MONTGOMERY)

#if defined(MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT)
int mbedtls_internal_ecp_double_add_mxz( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *R, mbedtls_ecp_point *S, const mbedtls_ecp_point *P,
const mbedtls_ecp_point *Q, const mbedtls_mpi *d );
#endif

/**
* \brief Randomize projective x/z coordinates:
* (X, Z) -> (l X, l Z) for random l
*
* \param grp pointer to the group representing the curve
*
* \param P the point on the curve to be randomised given with
* projective coordinates. This is an input/output parameter.
*
* \param f_rng a function pointer to the random number generator
*
* \param p_rng a pointer to the random number generator state
*
* \return 0 if successful
*/
#if defined(MBEDTLS_ECP_RANDOMIZE_MXZ_ALT)
int mbedtls_internal_ecp_randomize_mxz( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *P, int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#endif

/**
* \brief Normalize Montgomery x/z coordinates: X = X/Z, Z = 1.
*
* \param grp pointer to the group representing the curve
*
* \param P pointer to the point to be normalised. This is an
* input/output parameter.
*
* \return 0 if successful
*/
#if defined(MBEDTLS_ECP_NORMALIZE_MXZ_ALT)
int mbedtls_internal_ecp_normalize_mxz( const mbedtls_ecp_group *grp,
mbedtls_ecp_point *P );
#endif

#endif /* ECP_MONTGOMERY */

#endif /* MBEDTLS_ECP_INTERNAL_ALT */

#endif /* ecp_internal.h */

10 Externals/mbedtls/include/mbedtls/entropy.h
View file
@@ -2,7 +2,8 @@
* \file entropy.h
*
* \brief Entropy accumulator implementation
*
*/
/*
* Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
@@ -106,7 +107,7 @@ typedef int (*mbedtls_entropy_f_source_ptr)(void *data, unsigned char *output, s
/**
* \brief Entropy source state
*/
typedef struct
typedef struct mbedtls_entropy_source_state
{
mbedtls_entropy_f_source_ptr f_source; /**< The entropy source callback */
void * p_source; /**< The callback data pointer */
@@ -119,8 +120,9 @@ mbedtls_entropy_source_state;
/**
* \brief Entropy context structure
*/
typedef struct
typedef struct mbedtls_entropy_context
{
int accumulator_started;
#if defined(MBEDTLS_ENTROPY_SHA512_ACCUMULATOR)
mbedtls_sha512_context accumulator;
#else
@@ -164,7 +166,7 @@ void mbedtls_entropy_free( mbedtls_entropy_context *ctx );
* \param threshold Minimum required from source before entropy is released
* ( with mbedtls_entropy_func() ) (in bytes)
* \param strong MBEDTLS_ENTROPY_SOURCE_STRONG or
* MBEDTSL_ENTROPY_SOURCE_WEAK.
* MBEDTLS_ENTROPY_SOURCE_WEAK.
* At least one strong source needs to be added.
* Weaker sources (such as the cycle counter) can be used as
* a complement.
3 Externals/mbedtls/include/mbedtls/entropy_poll.h
View file
@@ -2,7 +2,8 @@
* \file entropy_poll.h
*
* \brief Platform-specific and custom entropy polling functions
*
*/
/*
* Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
62 Externals/mbedtls/include/mbedtls/error.h
View file
@@ -2,8 +2,9 @@
* \file error.h
*
* \brief Error to string translation
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
*/
/*
* Copyright (C) 2006-2018, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
@@ -23,6 +24,12 @@
#ifndef MBEDTLS_ERROR_H
#define MBEDTLS_ERROR_H

#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif

#include <stddef.h>

/**
@@ -49,38 +56,53 @@
*
* Module Nr Codes assigned
* MPI 7 0x0002-0x0010
* GCM 2 0x0012-0x0014
* BLOWFISH 2 0x0016-0x0018
* GCM 3 0x0012-0x0014 0x0013-0x0013
* BLOWFISH 3 0x0016-0x0018 0x0017-0x0017
* THREADING 3 0x001A-0x001E
* AES 2 0x0020-0x0022
* CAMELLIA 2 0x0024-0x0026
* XTEA 1 0x0028-0x0028
* AES 5 0x0020-0x0022 0x0021-0x0025
* CAMELLIA 3 0x0024-0x0026 0x0027-0x0027
* XTEA 2 0x0028-0x0028 0x0029-0x0029
* BASE64 2 0x002A-0x002C
* OID 1 0x002E-0x002E 0x000B-0x000B
* PADLOCK 1 0x0030-0x0030
* DES 1 0x0032-0x0032
* DES 2 0x0032-0x0032 0x0033-0x0033
* CTR_DBRG 4 0x0034-0x003A
* ENTROPY 3 0x003C-0x0040 0x003D-0x003F
* NET 11 0x0042-0x0052 0x0043-0x0045
* NET 13 0x0042-0x0052 0x0043-0x0049
* ARIA 4 0x0058-0x005E
* ASN1 7 0x0060-0x006C
* CMAC 1 0x007A-0x007A
* PBKDF2 1 0x007C-0x007C
* HMAC_DRBG 4 0x0003-0x0009
* CCM 2 0x000D-0x000F
* HMAC_DRBG 4 0x0003-0x0009
* CCM 3 0x000D-0x0011
* ARC4 1 0x0019-0x0019
* MD2 1 0x002B-0x002B
* MD4 1 0x002D-0x002D
* MD5 1 0x002F-0x002F
* RIPEMD160 1 0x0031-0x0031
* SHA1 1 0x0035-0x0035 0x0073-0x0073
* SHA256 1 0x0037-0x0037 0x0074-0x0074
* SHA512 1 0x0039-0x0039 0x0075-0x0075
* CHACHA20 3 0x0051-0x0055
* POLY1305 3 0x0057-0x005B
* CHACHAPOLY 2 0x0054-0x0056
* PLATFORM 1 0x0070-0x0072
*
* High-level module nr (3 bits - 0x0...-0x7...)
* Name ID Nr of Errors
* PEM 1 9
* PKCS#12 1 4 (Started from top)
* X509 2 19
* X509 2 20
* PKCS5 2 4 (Started from top)
* DHM 3 9
* PK 3 14 (Started from top)
* RSA 4 9
* ECP 4 8 (Started from top)
* MD 5 4
* CIPHER 6 6
* SSL 6 17 (Started from top)
* SSL 7 31
* DHM 3 11
* PK 3 15 (Started from top)
* RSA 4 11
* ECP 4 10 (Started from top)
* MD 5 5
* HKDF 5 1 (Started from top)
* CIPHER 6 8
* SSL 6 23 (Started from top)
* SSL 7 32
*
* Module dependent error code (5 bits 0x.00.-0x.F8.)
*/