Skip to content
Permalink
v4.2.0
Switch branches/tags
Go to file
 
 
Cannot retrieve contributors at this time

News

User-visible changes worth mentioning.

master

4.2.0

  • Security fix: Address CVE-2016-6582, implement token revocation according to spec (tokens might not be revoked if client follows the spec).
  • [#873] Add hooks to Doorkeeper::ApplicationMetalController
  • [#871] Allow downstream users to better utilize doorkeeper spec factories by eliminating name conflict on :user factory.

4.1.0

  • [#845] Allow customising the Doorkeeper::ApplicationController base controller

4.0.0

  • [#834] Fix AssetNotPrecompiled error with Sprockets 4
  • [#843] Revert "Fix validation error messages"
  • [#847] Specify Null option to timestamps

4.0.0.rc4

  • [#777] Add support for public client in password grant flow
  • [#823] Make configuration and specs ORM independent
  • [#745] Add created_at timestamp to token generation options
  • [#838] Drop Application#scopes generator and warning, introduced for upgrading doorkeeper from v2 to v3.
  • [#801] Fix Rails 5 warning messages
  • Test against Rails 5 RC1

4.0.0.rc3

  • [#769] Revoke refresh token on access token use. To make use of the new config add previous_refresh_token column to oauth_access_tokens:

    rails generate doorkeeper:previous_refresh_token
    
  • [#811] Toughen parameters filter with exact match

  • [#813] Applications admin bugfix

  • [#799] Fix Ruby Warnings

  • Drop attr_accessible from models

Backward incompatible changes

  • [#730] Force all timezones to use UTC to prevent comparison issues.
  • [#802] Remove config.i18n.fallbacks from engine

4.0.0.rc2

  • Fix optional belongs_to for Rails 5
  • Fix Ruby warnings

4.0.0.rc1

Backward incompatible changes

  • Drops support for Rails 4.1 and earlier
  • Drops support for Ruby 2.0
  • [#778] Bug fix: use the remaining time that a token is still valid when building the redirect URI for the implicit grant flow

Other changes

  • [#771] Validation error messages fixes
  • Adds foreign key constraints in generated migrations between tokens and grants, and applications
  • Support Rails 5

3.1.0

  • [#736] Existing valid tokens are now reused in client_credentials flow
  • [#749] Allow user to raise authorization error with custom messages. Under resource_owner_authenticator block a user can raise Doorkeeper::Errors::DoorkeeperError.new('custom_message')
  • [#762] Check doesn’t abort the actual migration, so it runs
  • [#722] doorkeeper_forbidden_render_options now supports returning a 404 by specifying respond_not_found_when_forbidden: true in the doorkeeper_forbidden_render_options method.
  • [#734] Simplify and remove duplication in request strategy classes

3.0.1

  • [#712] Wrap exchange of grant token for access token and access token refresh in transactions
  • [#704] Allow applications scopes to be mass assigned
  • [#707] Fixed order of Mixin inclusion and table_name configuration in models
  • [#712] Wrap access token and refresh grants in transactions
  • Adds JRuby support
  • Specs, views and documentation adjustments

3.0.0

Other changes

  • [#693] Updates en.yml.

3.0.0 (rc2)

Backward incompatible changes

  • [#678] Change application-specific scopes to take precedence over server-wide scopes. This removes the previous behavior where the intersection between application and server scopes was used.

Other changes

  • [#671] Fixes NoMethodError - undefined method 'getlocal' when calling the /oauth/token path. Switch from using a DateTime object to update AR to using a Time object. (Issue #668)
  • [#677] Support editing application-specific scopes via the standard forms
  • [#682] Pass error hash to Grape error!
  • [#683] Generate application secret/UID if fields are blank strings

3.0.0 (rc1)

Backward incompatible changes

  • [#648] Extracts mongodb ORMs to https://github.com/doorkeeper-gem/doorkeeper-mongodb. If you use ActiveRecord you don’t need to do any change, otherwise you will need to install the new plugin.
  • [#665] doorkeeper_unauthorized_render_options(error:) and doorkeeper_forbidden_render_options(error:) now accept error keyword argument.

Removed deprecations

  • Removes doorkeeper_for deprecation notice.
  • Remove applications.scopes upgrade notice.

2.2.2

  • [#541] Fixed undefined method attr_accessible problem on Rails 4 (happens only when ProtectedAttributes gem is used) in #599

2.2.1

  • [#636] custom_access_token_expires_in bugfixes
  • [#641] syntax error fix (Issue #612)
  • [#633] Send extra details to Custom Token Generator
  • [#628] Refactor: improve orm adapters to ease extension
  • [#637] Upgrade to rspec to 3.2

2.2.0 - 2015-04-19

  • [#611] Allow custom access token generators to be used
  • [#632] Properly fallback to default_scopes when no scope is specified
  • [#622] Clarify that there is a logical OR between scopes for authorizing
  • [#635] Upgrade to rspec 3
  • [#627] i18n fallbacks to english
  • Moved CHANGELOG to NEWS.md

2.1.4 - 2015-03-27

  • [#595] HTTP spec: Add scope for refresh token scope param
  • [#596] Limit scopes in app scopes for client credentials
  • [#567] Add Grape helpers for easier integration with Grape framework
  • [#606] Add custom access token expiration support for Client Credentials flow

2.1.3 - 2015-03-01

  • [#588] Fixes scopes_match? bug that skipped authorization form in some cases

2.1.2 - 2015-02-25

  • [#574] Remove unused update authorization route.
  • [#576] Filter out sensitive parameters from logs.
  • [#582] The Authorization HTTP header fields are now case insensitive.
  • [#583] Database connection bugfix in certain scenarios.
  • Testing improvements

2.1.1 - 2015-02-06

  • Remove wildcard_redirect_url option
  • [#481] Customize token flow OAuth expirations with a config lambda
  • [#568] TokensController: Memoize strategy.authorize_response result to enable subclasses to use the response object.
  • [#571] Fix database initialization issues in some configurations.
  • Documentation improvements

2.1.0 - 2015-01-13

  • [#540] Include created_at in response.
  • [#538] Check application-level scopes in client_credentials and password flow.
  • [5596227] Check application scopes in AccessToken when present. Fixes a bug in doorkeeper 2.0.0 and 2.0.1 referring to application specific scopes.
  • [#534] Internationalizes doorkeeper views.
  • [#545] Ensure there is a connection to the database before checking for missing columns
  • [#546] Use Doorkeeper:: prefix when referencing Application to avoid possible application model name conflict.
  • [#538] Test with Rails ~> 4.2.

Potentially backward incompatible changes

  • Enable by default authorization_code and client_credentials grant flows. Disables implicit and password grant flows by default.
  • [#510, #544, 722113f] Revoked refresh token response bugfix.

2.0.1 - 2014-12-17

  • [#525, #526, #527] Fix ActiveRecord::NoDatabaseError on gem load.

2.0.0 - 2014-12-16

Backward incompatible changes

  • [#448] Removes doorkeeper_for helper. Now we use before_action :doorkeeper_authorize!.

  • [#469] Allow client applications to restrict the set of allowable scopes. Fixes #317. oauth_applications relation needs a new scopes string column, non nullable, which defaults to an empty string. To add the column run:

    rails generate doorkeeper:application_scopes
    

    If you’d rather do it by hand, your ActiveRecord migration should contain:

    add_column :oauth_applications, :scopes, :string, null: false, default: ‘’

Removed deprecations

  • Removes test_redirect_uri option. It is now called native_redirect_uri.
  • [#446] Removes mount Doorkeeper::Engine. Now we use use_doorkeeper.

Others

  • [#484] Performance improvement - avoid performing order_by when not required.
  • [#450] When password is invalid in Password Credentials Grant, Doorkeeper returned 'invalid_resource_owner' instead of 'invalid_grant', as the spec declares. Fixes #444.
  • [#452] Allows revoked_at to be set in the future, for future expiry. Rationale: https://github.com/doorkeeper-gem/doorkeeper/pull/452#issuecomment-51431459
  • [#480] For Implicit grant flow, access tokens can now be reused. Fixes #421.
  • [#491] Reworks of @jasl's #454 and #478. ORM refactor that allows doorkeeper to be extended more easily with unsupported ORMs. It also marks the boundaries between shared model code and ORM specifics inside of the gem.
  • [#496] Tests with Rails 4.2.
  • [#489] Adds force_ssl_in_redirect_uri to force the usage of the HTTPS protocol in non-native redirect uris.
  • [#516] SECURITY: Adds protect_from_forgery to Doorkeeper::ApplicationController
  • [#518] Fix random failures in mongodb.

1.4.2 - 2015-03-02

  • [#576] Filter out sensitive parameters from logs

1.4.1 - 2014-12-17

  • [#516] SECURITY: Adds protect_from_forgery to Doorkeeper::ApplicationController

1.4.0 - 2014-07-31

  • internals
    • [#427] Adds specs expectations.
    • [#428] Error response refactor.
    • [#417] Moves token validation into Access Token class.
    • [#439] Removes redundant module includes.
    • [#443] TokensController and TokenInfoController inherit from ActionController::Metal
  • bug
    • [#418] fixes #243, requests with insufficient scope now respond 403 instead of 401. (API change)
    • [#438] fixes #398, native redirect for implicit token grant bug.
    • [#440] namespace fixes
  • enhancements
    • [#432] Keeps query parameters

1.3.1 - 2014-07-06

  • enhancements
    • [#405] Adds facade to more easily get the token from a request in a route constraint.
    • [#415] Extend Doorkeeper TokenResponse with an after_successful_response callback that allows handling of response object.
  • internals
    • [#409] Deprecates test_redirect_uri in favor of native_redirect_uri. See discussion in: [#351].
    • [#411] Clean rspec deprecations. General test improvements.
    • [#412] rspec line width can go longer than 80 (hound CI config).
  • bug
    • [#413] fixes #340, routing scope is now taken into account in redirect.
    • [#401] and [#425] application is not required any longer for access_token.

1.3.0 - 2014-05-23

  • enhancements
    • [#387] Adds reuse_access_token configuration option.

1.2.0 - 2014-05-02

  • enhancements
    • [#376] Allow users to enable basic header authorization for access tokens.
    • [#374] Token revocation implementation [RFC 7009]
    • [#295] Only enable specific grant flows.
  • internals
    • [#381] Locale source fix.
    • [#380] Renames errors_for to doorkeeper_errors_for.
    • [#390] Style adjustments in accordance with Ruby Style Guide form Thoughtbot.

1.1.0 - 2014-03-29

  • enhancements
    • [#336] mongoid4 support.
    • [#372] Allow users to set ActiveRecord table_name_prefix/suffix options
  • internals
    • [#343] separate OAuth's admin and user end-point to different layouts, upgrade theme to Bootstrap 3.1.
    • [#348] Move render_options in filter after @error has been set

1.0.0 - 2014-01-13

  • bug (spec)
    • [#228] token response expires_in value is now in seconds, relative to request time
    • [#296] client is optional for password grant type.
    • [#319] If client credentials are present on password grant type they are validated
    • [#326] If client credentials are present in refresh token they are validated
    • [#326] If authenticated client does not match original client that obtained a refresh token it responds invalid_grant instead of invalid_client. Previous usage was invalid according to Section 5.2 of the spec.
    • [#329] access tokens' scopes string wa being compared against default_scopes symbols, always unauthorizing.
    • [#318] Include "WWW-Authenticate" header with Unauthorized responses
  • enhancements
    • [#293] Adds ActionController::Instrumentation in TokensController
    • [#298] Support for multiple redirect_uris added.
    • [#313] AccessToken.revoke_all_for actually revokes all non-revoked tokens for an application/owner instead of deleting them.
    • [#333] Rails 4.1 support
  • internals
    • Removes jQuery dependency [fixes #300] [PR #312 is related]
    • [#294] Client uid and secret will be generated only if not present.
    • [#316] Test warnings addressed.
    • [#338] Rspec 3 syntax.

0.7.4 - 2013-12-01

  • bug
    • Symbols instead of strings for user input.

0.7.3 - 2013-10-04

  • enhancements
    • [#204] Allow to overwrite scope in routes
  • internals
  • bug
    • [#290] Support for Rails 4 when 'protected_attributes' gem is present.

0.7.2 - 2013-09-11

  • enhancements
    • [#272] Allow issuing multiple access_tokens for one user/application for multiple devices
    • [#170] Increase length of allowed redirect URIs
    • [#239] Do not try to load unavailable Request class for the current phase.
    • [#273] Relax jquery-rails gem dependency

0.7.1 - 2013-08-30

  • bug
    • [#269] Rails 3.2 raised ActiveModel::MassAssignmentSecurity::Error.

0.7.0 - 2013-08-21

  • enhancements
    • [#229] Rails 4!
  • internals
    • [#203] Changing table name to be specific in column_names_with_table
    • [#215] README update
    • [#227] Use Rails.config.paths["config/routes"] instead of assuming "config/routes.rb" exists
    • [#262] Add jquery as gem dependency
    • [#263] Add a configuration for ActiveRecord.establish_connection
    • Deprecation and Ruby warnings (PRs merged outside of GitHub).

0.6.7 - 2013-01-13

  • internals
    • [#188] Add IDs to the show views for integration testing @egtann

0.6.6 - 2013-01-04

  • enhancements
    • [#187] Raise error if configuration is not set

0.6.5 - 2012-12-26

  • enhancements

0.6.4 - 2012-12-15

  • bug
    • [#180] Add localization to authorized_applications destroy notice @aalvarado

0.6.3 - 2012-12-07

  • bugfixes
    • [#163] Error response content-type header should be application/json @ggayan
    • [#175] Make token.expires_in_seconds return nil when expires_in is nil @miyagawa
  • enhancements
    • [#166, #172, #174] Behavior to automatically authorize based on a configured proc
  • internals
    • [#168] Using expectation syntax for controller specs @rdsoze

0.6.2 - 2012-11-10

  • bugfixes
    • [#162] Remove ownership columns from base migration template @rdsoze

0.6.1 - 2012-11-07

  • bugfixes
    • [#160] Removed |routes| argument from initializer authenticator blocks
  • documentation
    • [#160] Fixed description of context of authenticator blocks

0.6.0 - 2012-11-05

  • enhancements
    • Mongoid orm configuration accepts only :mongoid2 or :mongoid3
    • Authorization endpoint does not redirect in #new action anymore. It wasn't specified by OAuth spec
    • TokensController now inherits from ActionController::Metal. There might be performance upgrades
    • Add link to authorization in Applications scaffold
    • [#116] MongoMapper support @carols10cents
    • [#122] Mongoid3 support @petergoldstein
    • [#150] Introduce test redirect uri for applications
  • bugfixes
    • [#157] Response token status should be :ok, not :success @theycallmeswift
    • [#159] Remove ActionView::Base.field_error_proc override (fixes #145)
  • internals
    • Update development dependencies
    • Several refactorings
    • Rails/ORM are easily swichable with env vars (rails and orm)
    • Travis now tests against Mongoid v2

0.5.0 - 2012-10-20

Official support for rubinius was removed.

  • enhancements
    • Configure the way access token is retrieved from request (default to bearer header)
    • Authorization Code expiration time is now configurable
    • Add support for mongoid
    • [#78, #128, #137, #138] Application Ownership
    • [#92] Allow users to skip controllers
    • [#99] Remove deprecated warnings for data-* attributes @towerhe
    • [#101] Return existing access_token for PasswordAccessTokenRequest @benoist
    • [#104] Changed access token scopes example code to default_scopes and optional_scopes @amkirwan
    • [#107] Fix typos in initializer
    • [#123] i18n for validator, flash messages @petergoldstein
    • [#140] ActiveRecord is the default value for the ORM @petergoldstein
  • internals
    • [#112, #120] Replacing update_attribute with update_column to eliminate deprecation warnings @rmoriz, @petergoldstein
    • [#121] Updating all development dependencies to recent versions. @petergoldstein
    • [#144] Adding MongoDB dependency to .travis.yml @petergoldstein
    • [#143] Displays errors for unconfigured error messages @timgaleckas
  • bugfixes
    • [#102] Not returning 401 when access token generation fails @cslew
    • [#125] Doorkeeper is using ActiveRecord version of as_json in ORM agnostic code @petergoldstein
    • [#142] Prevent double submission of password based authentication @bdurand
  • documentation
    • [#141] Add rack-cors middleware to readme @gottfrois

0.4.2 - 2012-06-05

  • bugfixes:
    • [#94] Uninitialized Constant in Password Flow

0.4.1 - 2012-06-02

  • enhancements:
    • Backport: Move doorkeeper_for extension to Filter helper

0.4.0 - 2012-05-26

  • deprecation
    • Deprecate authorization_scopes
  • database changes
    • AccessToken#resource_owner_id is not nullable
  • enhancements
    • [#83] Add Resource Owner Password Credentials flow @jaimeiniesta
    • [#76] Allow token expiration to be disabled @mattgreen
    • [#89] Configure the way client credentials are retrieved from request
    • [#b6470a] Add Client Credentials flow
  • internals
    • [#2ece8d, #f93778] Introduce Client and ErrorResponse classes

0.3.4 - 2012-05-24

  • Fix attr_accessible for rails 3.2.x

0.3.3 - 2012-05-07

  • [#86] shrink gem package size

0.3.2 - 2012-04-29

  • enhancements
  • internals
    • [#49] Add Gemnasium status image to README @laserlemon
    • [#50] Fix typos @tomekw
    • [#51] Updated the factory_girl_rails dependency, fix expires_in response which returned a float number instead of integer @antekpiechnik
    • [#62] Typos, .gitignore @jaimeiniesta
    • [#65] Change _path redirections to _url redirections @jaimeiniesta
    • [#75] Fix unknown method #authenticate_admin! @mattgreen
    • Remove application link in authorized app view

0.3.1 - 2012-02-17

  • enhancements
    • [#48] Add if, else options to doorkeeper_for
    • Add views generator
  • internals
    • Namespace models

0.3.0 - 2012-02-11

  • enhancements
    • [#17, #31] Add support for client credentials in basic auth header @GoldsteinTechPartners
    • [#28] Add indices to migration @GoldsteinTechPartners
    • [#29] Allow doorkeeper to run with rails 3.2 @john-griffin
    • [#30] Improve client's redirect uri validation @GoldsteinTechPartners
    • [#32] Add token (implicit grant) flow @GoldsteinTechPartners
    • [#34] Add support for custom unathorized responses @GoldsteinTechPartners
    • [#36] Remove repetitions from the Authorised Applications view @carvil
    • When user revoke an application, all tokens for that application are revoked
    • Error messages now can be translated
    • Install generator copies the error messages localization file
  • internals
    • Fix deprecation warnings in ActiveSupport::Base64
    • Remove deprecation in doorkeeper_for that handles hash arguments
    • Depends on railties instead of whole rails framework
    • CI now integrates with rails 3.1 and 3.2

0.2.0 - 2011-12-17

  • enhancements
    • [#4] Add authorized applications endpoint
    • [#5, #11] Add access token scopes
    • [#10] Add access token expiration by default
    • [#9, #12] Add refresh token flow
  • internals
    • [#7] Improve configuration options with :default
    • Improve configuration options with :builder
    • Refactor config class
    • Improve coverage of authorization request integration
  • bug fixes
    • [#6, #20] Fix access token response headers
    • Fix issue with state parameter
  • deprecation
    • deprecate :only and :except options in doorkeeper_for

0.1.1 - 2011-11-30

  • enhancements
    • [#3] Authorization code must be short lived and single use
    • [#2] Improve views provided by doorkeeper
    • [#1] Skips authorization form if the client has been authorized by the resource owner
    • Improve readme
  • bugfixes
    • Fix issue when creating the access token (wrong client id)

0.1.0 - 2011-11-25

  • Authorization Code flow
  • OAuth applications endpoint