LL10G_Cyclone10GX_1

Test of 10 Gb ethernet output from Cyclone 10 GX dev kit

All switches up (OFF, 1) except S3_2 (and S2_1) For FMC JTAG not in use, set S5_1 to 0

Quartus Pro 18.1

Program with .sof (via .cdf to open programmer)
Runs for unlimited time, but can't program permanently
See heartbeat LED
Reset Arduino with soft_i2c_cyclone10gx to program SFP outputs (level shifted to 1.8 V)
See red, then green, SFP LEDs
Open system console

cd hwtesting\system_console

source main.tcl

SEND 0 10G 80

SENDAGAIN

Set reset pulse duration with (ex: 8) : PULSES_pos1dur

Set write pulse duration with (ex: 7) : PULSES_pos2dur

Set read pulse duration with (ex: 30) : PULSES_pos3dur

https://en.wikipedia.org/wiki/Ethernet_frame
https://en.wikipedia.org/wiki/Internet_Protocol_version_4
https://en.wikipedia.org/wiki/User_Datagram_Protocol

mac64b_clk; // 156.25 MHz via pll
6.4ns per tick

C10GX kit download: https://www.dropbox.com/s/qehok7muoahcpib/cyclone-10-gx-kit-collateral.zip?dl=0
Board test system: https://www.dropbox.com/sh/13s1js1465clt0y/AADcKpqSJ-fH7NIdkqhGLnxYa?dl=0
Factory recovery: https://www.dropbox.com/sh/fvxx9ef50a99x4v/AAATVMVC8e21aiI6xPSL01WCa?dl=0

Simulation of amps: https://tinyurl.com/297t5xo8

Simulation of pulse generators: https://tinyurl.com/27l9ev2u