Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP

Comparing changes

Choose two branches to see what's changed or to start a new pull request. If you need to, you can also compare across forks.

Open a pull request

Create a new pull request by comparing changes across two branches. If you need to, you can also compare across forks.
base: efcebbedfe
...
compare: 7d990ca435
Checking mergeability… Don't worry, you can still create the pull request.
Commits on Feb 20, 2014
luka imx6: drop upstream rejected patch
http://article.gmane.org/gmane.linux.drivers.i2c/17891

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39639 3c298f89-4303-0410-b956-a3cf2f4a3e73
f11b93c
juhosg kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP c…
…ases

This is a backport of code to improve the quality of fq_codel
hashing for 3.10 for some encapsulated protocols.

Not needed in 3.11 and later.

Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4902/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39640 3c298f89-4303-0410-b956-a3cf2f4a3e73
696cc8a
juhosg ar71xx: Add support for MikroTik RB951Ui-2HnD
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/
for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been
abandoned because it wasn't generated and sent to the mailing list
correctly and doesn't apply as a result.  I have cleaned up this patch.

When testing this on real hardware, I also noticed that wireless didn't
work, so this patch fixes that as well.

This patch applies cleanly to SVN 39392.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Patchwork: http://patchwork.openwrt.org/patch/4773/
[juhosg:
  - drop the 'rb951ui_wlan_init' function and rework the code to
    use the recently introduced rb95x_wlan_init function instead,
  - fix GPIO number of the port5 LED,
  - rename LEDs according to the standard LED naming conventions,
    and use 'rb' prefix in the names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39641 3c298f89-4303-0410-b956-a3cf2f4a3e73
8547839
juhosg ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet loss
When the RB91x device uses a GbE link the connection
suffers from packet loss:

  root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q
  PING 192.168.1.254 (192.168.1.254): 65507 data bytes

  --- 192.168.1.254 ping statistics ---
  20 packets transmitted, 9 packets received, 55% packet loss
  round-trip min/avg/max = 4.570/4.815/4.999 ms

Using a different PLL value fixes the issue.

  root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q
  PING 192.168.1.254 (192.168.1.254): 65507 data bytes

  --- 192.168.1.254 ping statistics ---
  100 packets transmitted, 100 packets received, 0% packet loss
  round-trip min/avg/max = 4.449/5.413/13.870 ms

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39642 3c298f89-4303-0410-b956-a3cf2f4a3e73
4baabda
luka imx6: enable IMX6 watchdog
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39643 3c298f89-4303-0410-b956-a3cf2f4a3e73
9a6b84a
luka imx6: update Ventana dts
Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39644 3c298f89-4303-0410-b956-a3cf2f4a3e73
53204c8
cyrus 6in4: add support for he.net updatekey
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39646 3c298f89-4303-0410-b956-a3cf2f4a3e73
3b49253
jow firewall: fix several ipset integration issues (#15016)
	- Do not consider bitmap storage for IPv6 family sets
	- Move ipset family parameter before any additional option
	- Only emit family parameter for hash sets
	- Do not allow IPv6 iprange for IPv4 sets and vice versa

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39647 3c298f89-4303-0410-b956-a3cf2f4a3e73
bdd8712
Commits on Feb 21, 2014
jow netifd: fix validation constraints
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39648 3c298f89-4303-0410-b956-a3cf2f4a3e73
f58f612
jow firewall: fix validation constraints
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39649 3c298f89-4303-0410-b956-a3cf2f4a3e73
442609d
kaloz [base-files]: the root password should be empty for real, like before
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39650 3c298f89-4303-0410-b956-a3cf2f4a3e73
21ac6c3
cyrus odhcpd: fix wrong address pool being advertised
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39651 3c298f89-4303-0410-b956-a3cf2f4a3e73
93d3a56
hauke kexec-tools: disable lzma support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39652 3c298f89-4303-0410-b956-a3cf2f4a3e73
7ef9661
hauke kernel: add missing depends on kmod-mii
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39670 3c298f89-4303-0410-b956-a3cf2f4a3e73
22d1904
Commits on Feb 22, 2014
jogo brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
router.
It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
modem equipped with 64 MiB RAM and 8 MiB flash.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4266/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39671 3c298f89-4303-0410-b956-a3cf2f4a3e73
5b7ec56
jogo brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL router
This adds userspace support for Sagemcom F@st 2704 router.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4215/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39672 3c298f89-4303-0410-b956-a3cf2f4a3e73
64fe18d
jogo brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL ro…
…uter

This adds profile and build image for Sagemcom F@st2704, using b43
driver.
For WiFi to work properly BCMA fallback SPROM support patch must
be applied (http://git.io/z1Ki8A).

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4212/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39673 3c298f89-4303-0410-b956-a3cf2f4a3e73
adee60a
jogo brcm63xx: add support for Asmax AR 1004g router
Support for Asmax AR 1004g router

Signed-off-by: Adrian Feliks <mexit@o2.pl>
Patchwork: http://patchwork.openwrt.org/patch/4464/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39674 3c298f89-4303-0410-b956-a3cf2f4a3e73
254b719
jogo brcm63xx: F@ST2504n board support
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4729/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39675 3c298f89-4303-0410-b956-a3cf2f4a3e73
3f1bf69
jogo brcm63xx: F@ST2504n board support (image, base-files)
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4730/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39676 3c298f89-4303-0410-b956-a3cf2f4a3e73
fadadda
jogo brcm63xx: fix number of switch ports for BCM63168/63268
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268
has two additional RGMII ports, making it 8.
Fix this by checking the chip variant and applying an appropriate
limit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39677 3c298f89-4303-0410-b956-a3cf2f4a3e73
6f3f938
jogo brcm63xx: add VW6339GU support
Completely untested except for booting from network; wan port
only works in 10/HD, lan1 only in 100/FD.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39678 3c298f89-4303-0410-b956-a3cf2f4a3e73
7850bcd
jogo brcm63xx: add initial support for BCM963268BU_P300 reference board
Only netboot tested, so no images or now.
GbE ports are only working in FE mode, and leds do not work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39679 3c298f89-4303-0410-b956-a3cf2f4a3e73
1d074ae
jogo brcm63xx: fix number of usb ports for HW556 variants
Don't only fix up the fallback board, but also all three variants.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39680 3c298f89-4303-0410-b956-a3cf2f4a3e73
ddd35f4
jogo brcm63xx: fix RG100A/DB120 usb port number
Set usbh ports to 2 to fix #15007.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39681 3c298f89-4303-0410-b956-a3cf2f4a3e73
1d07782
jogo b53: Add BCM53128 switch support
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4867/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39682 3c298f89-4303-0410-b956-a3cf2f4a3e73
86ef9ff
jogo b53: Make b53_switch_init static
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4869/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39683 3c298f89-4303-0410-b956-a3cf2f4a3e73
cb422cc
nbd ath9k: add a tx locking fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39684 3c298f89-4303-0410-b956-a3cf2f4a3e73
2a4a4cb
nbd ath9k: enable u-apsd support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39685 3c298f89-4303-0410-b956-a3cf2f4a3e73
1f7410e
nbd mac80211: merge some upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39686 3c298f89-4303-0410-b956-a3cf2f4a3e73
83f3a17
nbd ath9k: show more reset causes in debugfs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39687 3c298f89-4303-0410-b956-a3cf2f4a3e73
17ff2c8
nbd ath9k: fix issues that have been plaguing some powersave clients sinc…
…e the tx queueing rework (#14092)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39688 3c298f89-4303-0410-b956-a3cf2f4a3e73
4a926c7
nbd ath9k: fix issues with 5/10 mhz channel bandwidth (#14916)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39689 3c298f89-4303-0410-b956-a3cf2f4a3e73
e0f9ca4
nbd ath9k: reduce unnecessary logspam (#14940)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39690 3c298f89-4303-0410-b956-a3cf2f4a3e73
65c7813
nbd ath5k: mark the current survey channel as being used
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39691 3c298f89-4303-0410-b956-a3cf2f4a3e73
b9e524f
nbd gianfar: Fix reported number of sent bytes to BQL
This is a backported patch for the gianfar ethernet driver
used in TPLink 4900 v1. It is supposed to fix the error which
show up in dmesg with:
NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out
Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39692 3c298f89-4303-0410-b956-a3cf2f4a3e73
d1d6cb4
nico target/sunxi: add dependency on sunxi to kmod-wdt-sunxi
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39693 3c298f89-4303-0410-b956-a3cf2f4a3e73
fda43b1
juhosg ar71xx: refresh unaligned access hacks patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39694 3c298f89-4303-0410-b956-a3cf2f4a3e73
4303fc1
juhosg ar71xx: spi-ath79: fix initial GPIO CS line setup
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39695 3c298f89-4303-0410-b956-a3cf2f4a3e73
6478f0e
juhosg ar71xx/mikrotik: enable small sector erase in the m25p80 driver
The serial flash devices used on the ROuterBOARDs are
supporting 4KiB erase blocks. Enable the small sector
erase option in the m25p80 driver to avoid superfluous
erase/write of adjacent blocks.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39696 3c298f89-4303-0410-b956-a3cf2f4a3e73
d3c1bbb
juhosg ar71xx: add a generic GPIO latch driver
It will be used for the Mikrotik boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39697 3c298f89-4303-0410-b956-a3cf2f4a3e73
a9548e5
juhosg ar71xx/mikrotik: enable the GPIO latch driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39698 3c298f89-4303-0410-b956-a3cf2f4a3e73
74dc6ae
juhosg ar71xx: rb91x: register a gpio-latch platform device
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39699 3c298f89-4303-0410-b956-a3cf2f4a3e73
6a76415
Dave Taht Merge branch 'master' of /build/cero2/src/openwrt
Dealt with stuff pushed upstream.

Conflicts:
	package/network/services/odhcpd/Makefile
	target/linux/generic/patches-3.10/686-flow_dissector-clean-up-IPIP-case.patch
	target/linux/generic/patches-3.10/687-flow_dissector-add-support-for-IPPROTO_IPV6.patch
	target/linux/generic/patches-3.10/688-net-flow_dissector-add-802.1ad-support.patch
f027429
Dave Taht Merge branch 'master' of /build/cero2/src/openwrt 82aa066
Dave Taht Add support for obsoleting resolv.conf 7d990ca