Skip to content
Branch: master
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
..
Failed to load latest commit information.
Makefile
README
memmap
uart02.bin
uart02.c
uart02.clang.bc
uart02.clang.bin
uart02.clang.hex
uart02.clang.opt.bc
uart02.clang.opt.elf
uart02.clang.opt.list
uart02.clang.opt.o
uart02.clang.opt.s
uart02.elf
uart02.hex
uart02.list
uart02.o
vectors.o
vectors.s

README

See the top level README for information on where to find the
schematic and programmers reference manual for the ARM processor
on the raspberry pi.  Also find information on how to load and run
these programs.

Based on uart01, this one enables the uart rxd1 receiver (gpio15).
It starts by printing 12345678 then whatever you type on the terminal
is echoed back.

See the top level README file for information on how to connect the
raspi uart to your host computer.

Using a dumb terminal (minicom) 115200 board No parity 8 bits 1 stop
bit, no flow control (might have to exit minicom and start again for
the flow control setting to take).  What you type on the dumb terminal
comes back.
You can’t perform that action at this time.