Skip to content
Branch: master
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
..
Failed to load latest commit information.
OS
images
soft
src
readme.md
viewme.png

readme.md

Module

Name

MDL-redpitaya

Title

RedPitaya board

Author

About

RedPitaya is a commercial board that is not a daugter board for our system but bring together different modules we have not develop yet (MDL-Ramp, MDL-ADC, MDL-WIFI).

For informations about this board one can look at their website, and the wiki.

Uses

Input

Output

Functions

Scheme

Schematic of the connectors E1 and E2 can be found on RedPitaya website:

Remarks

###General RedPitaya board need a 5V, 2A supply for the RedPitya.

Before turning on the RedPitaya, please copy the old OS server files (./OS/server/) into a blank micro-SD card. We use the old RedPitaya OS (0.92) because we have found a bug with the trigger C function with the new OS.

You must also plug a WIFI dongle (such as edimax EW_7811Un dongle). With the files you have copy into the SD card, the RedPitaya act as an access point, the WIFI name is redpitaya and the pass is also redpitaya. It's IP adress is 192.168.128.3 and pass and ID are both root. So to access the RedPitaya via ssh one must enter the folowing command lines:
ssh root@192.168.128.3
root

ITF-E_signal_envelope is plugged on IN1, ITF-D_amplified_filtered_signal is pluged on IN2, you must put the jumper on high voltage mode (full scale +/- 20V):

ITF-K_pulse_redpitaya is connect to PIN 3 (DIO0_P) of E1 connector.

Results

Pros/Cons/Constraint:

Pros: NA

Cons: expansive

Constraint: need 5V, 2A supply

You can’t perform that action at this time.