Skip to content

1.6
Compare
Choose a tag to compare
@prasimix prasimix released this 16 Feb 09:04
· 568 commits to master since this release
1.6
14cdfee

Important: This firmware version supports two revisions of the MCU module (task #94). For this reason, on first start after downloading, you can expect a selection like the one below to appear. If you got BB3 through a Crowd Supply crowdfunding campaign and the color of the PCB is green, choose r2B4 (the newer version of r3B3 has a PCB in blue).

mcu selection

If you accidentally select the wrong revision of the MCU module, you can correct it later on the System information page.

MCU selection

List of changes:

  • #35 Power channel coupling issues
  • #59 Module header background colors
  • #71 Improve text string editing
  • #75 Module labeling
  • #78 Bargraphs scaling
  • #92 Insecure functions should not be used
  • #94 Add support for MCU module r3B3
  • #115 MCU Failed message on power up is confusing
  • #116 SCPI DLOG settings change back to default after each trigger
  • #117 DLOG configuration menu & corresponding SCPI settings do not match
  • #118 Log configuration GUI
  • #120 Selected encoder step value is not remembered correctly
  • #123 Low current values presentation in DLOG viewer
  • #127 Negative number input problem (in DLOG offset)
  • #129 On time counter increment error
  • #130 Diode tester script stop issue
  • #131 Dout2 PWM settings are not saved in user profile
  • #134 Static IP address not using netmask, gateway, DNS
  • #135 Record info about module firmware update in event log
  • #136 Auto-recall mismatch on power up is not functional
  • #137 Keyboard Shift/Symbol Order
  • #140 Micropython NameError
  • #141 Some ramp & delay settings cause a reboot
  • #142 Op-amp calculator uses wrong values for calculating inverting configuration
  • #143 Ramp doesn't work on power up
  • #145 With Rprog in DCP405 Power limit should be inactive in display and OPP setting
  • #146 Change Protection ("shield") icon to channel settings icon on power modules
  • #147 Output coupling limitations in tracking mode
  • #148 DCM220 doesn't round off low power values
  • #149 Clear protection not always shown in red (follow up on #146)
  • #150 OVP changes in RProg mode
  • #158 DCM220 low value indication (<) doesn't fit in all screens
  • #160 Step settings in channel trigger display not updated from changes ramp & delay overview
  • #163 MQTT event error
Assets 4
Loading