diff --git a/docs/src/conf.py b/docs/src/conf.py
index a67b471..910104e 100644
--- a/docs/src/conf.py
+++ b/docs/src/conf.py
@@ -20,7 +20,7 @@
 # -- Project information -----------------------------------------------------
 
 project = 'elba'
-copyright = '2018, David Cao'
+copyright = '2019, David Cao'
 author = 'David Cao'
 
 # The short X.Y version
diff --git a/docs/src/index.rst b/docs/src/index.rst
index 1eb25c1..aabf8e4 100644
--- a/docs/src/index.rst
+++ b/docs/src/index.rst
@@ -9,6 +9,7 @@ to be a mostly comprehensive guide on actually using it.
    :caption: Usage
              
    usage/quick_start
+   usage/binaries_and_tests
    usage/installing
    usage/custom_subcommands
    usage/publishing
diff --git a/docs/src/reference/manifest.rst b/docs/src/reference/manifest.rst
index 5101eec..37bf059 100644
--- a/docs/src/reference/manifest.rst
+++ b/docs/src/reference/manifest.rst
@@ -181,7 +181,6 @@ three types of targets which elba can build:
       # this corresponds to the first of the following files which exists:
       # - bin/Whatever/Module.idr
       # - bin/Whatever/Module.lidr
-      # - src/bin/Whatever/Module.idr (because of the default `path` value)
 
       # Example 2: main uses dots instead of slashes to separate folders, and
       # includes an idr extension
@@ -200,8 +199,6 @@ three types of targets which elba can build:
       # corresponds to the first of the following files which exists:
       # - bin/Whatever/Module.idr
       # - bin/Whatever/Module.lidr
-      # - src/bin/Whatever/Module.idr (due to the default `path` value)
-      # - src/bin/Whatever/Module.lidr
       # in both cases, this file should have a function `Module.custom : IO ()`,
       # which will be used as the main function
 
diff --git a/docs/src/usage/binaries_and_tests.rst b/docs/src/usage/binaries_and_tests.rst
new file mode 100644
index 0000000..658671a
--- /dev/null
+++ b/docs/src/usage/binaries_and_tests.rst
@@ -0,0 +1,203 @@
+Binaries and Tests
+==================
+
+Although specifying a library target is pretty straightforward, trying
+to get a binary or a test target working can involve a lot more
+finagling; elba supports multiple syntaxes and ways to specify a
+binary target (and by extension, a test target, since test targets are
+just spruced-up binary targets under-the-hood) in order to ensure
+maximum flexibility and compatibility with the existing Idris code out
+in the wild. Although there is information about these kinds of targets
+:doc:`in the reference <../reference/manifest>`__, this section will
+help you build some intuition as to the building blocks of the binary
+target specification system, and will provide a "cookbook" of common
+usecases to follow.
+
+Terminology
+-----------
+
+There are a few terms you should know as a prerequisite:
+
+-  A **subpath** is a subdirectory of the project's root folder. By
+   definition, subpaths cannot refer to parent or absolute directories.
+   Examples include ``bin/``, ``bin/Whatever/Module``, ``Lightyear.idr``,
+   etc.
+
+-  A **module path** is the ``A.B.C`` name associated with a given Idris
+   file ("module"). Names in the module path are separated with periods,
+   and their precise location is determined by other config keys in the
+   manifest. Examples include ``Lightyear.Core``,
+   ``Control.Monad.Tardis``, etc.
+
+Subpaths and module paths can actually be combined into a **mixed path**,
+like in ``src/Lightyear.Core`` or ``tests/one/Tests.Unit.API``. The
+parts which are separated with slashes are considered the subpath
+portion (``src``, ``tests/one``), while the parts separated with periods
+are the module portion (``Lightyear.Core``, ``Tests.Unit.API**). When
+mixed, subpaths always precede module paths. These types of strings--
+subpaths, module paths, or mixed paths--will be referred to as
+**target strings** or **target specifiers**.
+
+In order to account for main functions which aren't named ``Main.main``,
+elba allows for generation of a main file which points to a function
+in another module. This will be referred to as "generating a main file"
+for another function.
+
+Resolution Rules
+----------------
+
+There are multiple components to any binary or test target; for our
+purposes, the relevant parts are the ``path`` and ``main`` specifiers.
+``main`` is required and refers to a target string, while ``path``
+refers to a parent directory in which the target string should be
+searched for. ``path`` can be omitted: its default value is ``src/``
+for binary targets and ``tests/`` for test targets.
+
+Given the following binary target:
+
+.. code-block:: toml
+
+   [[bin]]
+   path = "$p"
+   main = "a/.../pqr.xyz.ext"
+
+elba will go through the following rules to resolve a target specifier
+(the first search which works is used):
+
+1. Attempt to interpret as a subpath: filename ``pqr.xyz``, extension ``ext``
+   1. If there's no file extension or ``ext`` == ``idr`` or ``lidr``:
+      1. Search for ``a/.../xyz.idr``
+      2. Search for ``a/.../xyz.lidr``
+   2. Otherwise:
+      1. Search for ``a/.../xyz.idr``, generate main for fn ``ext``
+      2. Search for ``a/.../xyz.lidr``, generate main for fn ``ext``
+   3. If either branch failed, continue to next
+2. Otherwise, interpret as a mixed or module path:
+   1. Search for ``$p/a/.../pqr/xyz/ext.idr``
+   2. Search for ``$p/a/.../pqr/xyz/ext.lidr``
+   3. Search for ``$p/a/.../pqr/xyz.idr``, generate main for fn ``ext``
+      (except if ``ext`` == ``idr`` or ``lidr``)
+   4. Search for ``$p/a/.../pqr/xyz.lidr``, generate main for fn ``ext``
+      (except if ``ext`` == ``idr`` or ``lidr``)
+
+These rules make more sense in practice.
+
+Source & Target Paths
+---------------------
+
+Internally, elba splits a path into two parts: a **source path** and a
+**target path**. Any file which is located in the source path will be
+included in the Idris build invocation with the ``--include`` flag (i.e.
+your source files *will not* be available unless they are located under
+the source path). To determine where to divide the source and target
+paths, elba uses the following rules:
+
+1. The source path of a subpath is its immediate parent.
+2. The source path of a mixed or module path is the value of the
+   ``path`` specifier.
+
+In Practice
+-----------
+
+This section contains a few handy examples of common patterns for
+target specifiers.
+
+Files in src/ directory
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Let's say your project has a file ``src/Main.idr``, with a function
+``Main.main``. You could generate a binary for it in the following
+ways (don't use all the ``[[bin]]`` blocks at once!)
+
+.. code-block:: toml
+
+   [[bin]]
+   path = "src" # also specified by default
+   main = "Main.idr"
+
+.. code-block:: toml
+
+   [[bin]]
+   # this is a subpath, so path will be ignored:
+   main = "src/Main.idr"
+
+src/ directory, custom main
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Now, let's say you decide to move your main file to somewhere more
+exotic, like ``src/bin/App/Cli.idr``, with a main function
+``App.Cli.run``. Which bin target you use depends on which files your
+binary will need to import to work:
+
+.. code-block:: toml
+
+   [[bin]]
+   # This binary needs files from the `src` directory
+   # This line is the default, so it isn't necessary
+   path = "src/"
+   main = "bin/App.Cli.run"
+   # this works as long as the file "bin/App.Cli.idr" doesn't exist
+   # also works: main = "bin/App/Cli.run", so long as
+   # "bin/App/Cli/run.idr" doesn't exist
+
+.. code-block:: toml
+
+   [[bin]]
+   # We only need files from src/bin
+   path = "src/bin"
+   main = "App.Cli.run"
+   # or main = "App/Cli.run"
+
+.. code-block:: toml
+
+   [[bin]]
+   # We only need files from src/bin/App
+   path = "src/bin/App"
+   main = "Cli.run"
+
+.. code-block:: toml
+
+   [[bin]]
+   # Equivalent to above
+   # Whatever we set path to is irrelevant; elba will resolve main as a
+   # subpath first
+   main = "src/bin/App/Cli.run"
+
+Adding a test
+~~~~~~~~~~~~~
+
+Because tests and binaries are represented the same way to elba, the
+same rules and processes apply here too. Let's add a test function
+``runTests`` in the file ``tests/Tests.idr``:
+
+.. code-block:: toml
+
+   [[test]]
+   path = "tests"
+   main = "Tests.runTests"
+
+``.idr`` and ``.lidr``
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+elba has special cases for target specifiers that end in ``idr`` or
+``lidr``. If you add a test target like so:
+
+.. code-block:: toml
+
+   [[test]]
+   path = "tests"
+   main = "Tests.idr"
+
+elba will look for:
+
+1. ``Tests.idr``
+2. ``tests/Tests/idr.idr``
+3. ``tests/Tests/idr.lidr``
+4. ``tests/Tests.idr``
+5. ``tests/Tests.lidr``
+
+elba will never try to generate anything if the target specifier ends
+with ``.idr`` or ``.lidr``.
+
+More examples of these are available in :doc:`the reference
+<../reference/manifest>`__.
diff --git a/docs/src/usage/publishing.rst b/docs/src/usage/publishing.rst
index d00d833..d4353ed 100644
--- a/docs/src/usage/publishing.rst
+++ b/docs/src/usage/publishing.rst
@@ -37,6 +37,7 @@ have multiple indices specified in your configuration, you can specify
 the index to use with the ``--index`` flag. For example:
 
 .. code-block:: console
+
    $ elba login a67fc893bccfea2141 --index index+git+https://github.com/elba/index
 
 Otherwise, elba will use the default index (the first index specified in
@@ -80,6 +81,7 @@ your project, under the ``package.ignore`` key.
 .gitignore files as list elements. An example is provided below:
 
 .. code-block:: toml
+
    [package]
    # snip: other package metadata
    # ignoring files that end with .out or .dev
diff --git a/src/lib/package/manifest.rs b/src/lib/package/manifest.rs
index 74cc646..89e9294 100644
--- a/src/lib/package/manifest.rs
+++ b/src/lib/package/manifest.rs
@@ -369,6 +369,9 @@ impl BinTarget {
                 // part exists, we assume that the last part refers to a function which
                 // should be treated as the main function.
                 Some((src_path, target_path.with_extension(after)))
+            } else if src_path.join(&target_path).with_extension("lidr").exists() {
+                // Same, but for literate file
+                Some((src_path, target_path.with_extension(after)))
             } else {
                 None
             }