C Standard ML Perl Shell Python OCaml
Fetching latest commit…
Cannot retrieve the latest commit at this time.
|Failed to load latest commit information.|
========================================= Building, Intalling, and Testing the PADSC Compiler and Library ========================================= Note: these instructions use GNU make (often called gmake or make). Be sure that the make program you are using is GNU make before proceeding. All of the gmake commands below are issued from directory $PADS_HOME. Once you have done the first two steps below, all the build steps can be done with one command. * NB: Make sure you do *not* have an 'nmake' program in your path. If you do, you should temporarily modify your PATH environment variable to remove the dir(s) that have nmake. After performing an initial gmake you can restore your PATH to its previous setting. > gmake and all of the test steps can be done with one command, > gmake regress The detailed build and test instructions (steps 3-7) show you how to to build and test the library and compiler separately. STEP 1: ENVIRONMENT SETUP Suppose you checked out the pads module in /home/fred/pads. You must arrange to have env variable PADS_HOME set to this location before doing other steps. Once PADS_HOME is set, you can source a DO_SETENV script that will set the other env variables that you will need (INSTALLROOT, PATH, LD_LIBRARY_PATH, etc.). DO_SETENV will also make your installation directories (rooted at INSTALLROOT) if they do not exist yet. To control the C-compiler used, do > setenv CC path-to-desired-compiler Below are instructions for different kinds of shells. You could do the following by hand, or add them to your shell init script. Note: Use DO_SETENV rather than Q_DO_SETENV when running from the command line to see how the env variables that are set up. Example for csh/tcsh users: setenv PADS_HOME /home/fred/pads source $PADS_HOME/scripts/Q_DO_SETENV.tcsh Example for sh/ksh/bash users: export PADS_HOME=/home/fred/pads . $PADS_HOME/scripts/Q_DO_SETENV.sh [OPTIONAL]: For the PADS-Galax project only, you may wish to set the following env variables to override their default values. Example for csh/tcsh users: setenv GALAX_HOME /home/fred/Galax setenv PADSGLX_HOME /home/fred/pads-glx/api setenv OCAML_LIB_DIR /home/fred/ocaml setenv PCRE_LIB_DIR <location of libpcre.so version 4.5> setenv USE_GALAX 1 Example for sh/ksh/bash users: export GALAX_HOME=/home/fred/Galax export PADSGLX_HOME=/home/fred/pads-glx/api export OCAML_LIB_DIR=/home/fred/ocaml export PCRE_LIB_DIR=<location of libpcre.so version 4.5> export USE_GALAX=1 STEP 2: INSTALL SML / SML RUNTIME To build the padsc compile, you need the Standard ML of NJ compiler (sml), version 110.59 or later. One the padsc compiler is built, you only require the SML runtime to execute padsc. (a) Install SML The sml compiler and directions on how to install it are available from the SMLNJ installation notes page: http://smlnj.sourceforge.net/install/index.html. The SMLNJ home page may be found at: http://smlnj.sourceforge.net/index.html. The simplest thing to do is to install the entire SML. (Advanced users may decide to only install the runtime and the sml startup script once padsc has been built.) (b) Put the sml startup script in your path, or set the environment variable SML to the location of this script. Example for csh/tcsh users: setenv SML /usr/common/sml/bin/sml Example for sh/ksh/bash users: export SML=/usr/common/sml/bin/sml STEP 3: BUILD AND INSTALL libast.a Folks at AT&T Labs Research collect many useful C routines in a single library called libast. PADS uses this library. IMPORTANT: BEFORE you issue the gmake command for libast you must: * Make sure INSTALLROOT has been set -- see step 1 above. * Make sure you do *not* have an 'nmake' program in your path. If you do, you should temporarily modify your PATH environment variable to remove the dir(s) that have nmake. After performing this step, restore your PATH to its previous setting. Now issue the following gmake command: > gmake ast_lib If everything goes as planned, the following file will be installed: $PADS_HOME/ast-ast/arch/$AST_ARCH/lib/libast.a (or the equivalent library name for your architecture). STEP 4: BUILD AND INSTALL THE PADSC LIBRARY > gmake padsc_lib STEP 4B [OPTIONAL]: BUILD AND INSTALL THE PGLX LIBRARY For the PADS-Galax project only, you need to do: > gmake USE_GALAX=1 pglx_lib STEP 5: TEST THE PADSC LIBRARY > gmake test_libpads This causes a set of regression tests for the library to be built and run. If you see a message of the form test_foo DIFFERS then there is a problem with the test_foo test. STEP 6: BUILD THE COMPILER > gmake padsc_comp STEP 7: TEST THE COMPILER > gmake test_comp This causes a set of regression tests for the compiler/library to be built and run. If you see a message of the form test_foo DIFFERS then there is a problem with the test_foo test. ========================================= Rebuilding the Compiler and Libraries ========================================= As mentioned at the start, all of the build steps can be done together using: > gmake and all of the test steps can be done together using: > gmake regress [OPTIONAL]: Or, for the PADS-Galax project only, use > gmake USE_GALAX=1 If you install a major upgrade to the source, you may need to do: > gmake veryclean before you do a new build. ========================================= Using the PADSC Compiler and Library ========================================= The padsc script is in $PADS_HOME/scripts. The compiler regression is a good place to look for simple examples.