diff --git a/MK2/Slic3r/Pretty PLA V3.ini b/MK2/Slic3r/Pretty PLA V3.ini new file mode 100644 index 0000000..c993dad --- /dev/null +++ b/MK2/Slic3r/Pretty PLA V3.ini @@ -0,0 +1,215 @@ +# generated by Slic3r Prusa Edition 1.41.0-beta+ on 2018-08-16 at 11:52:06 +avoid_crossing_perimeters = 0 +bed_shape = 0x0,250x0,250x210,0x210 +bed_temperature = 65 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n\n\n\n\n +between_objects_gcode = +bottom_solid_layers = 3 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 0.95 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4"; +complete_objects = 0 +cooling = 1 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_acceleration = 1000 +default_filament_profile = "Prusa PLA" +default_print_profile = 0.15mm OPTIMAL MK3 +deretract_speed = 0 +disable_fan_first_layers = 1 +dont_support_bridges = 0 +duplicate_distance = 6 +elefant_foot_compensation = 0 +end_filament_gcode = "; Filament-specific end gcode" +end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 F1000.0 ; set feed rate\nG1 E-3 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X20 Y200; home X axis\n\nM84 ; disable motors\n\n\n +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.42 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_loading_move = -2 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extruder_colour = #00FFFF +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 0.95 +extrusion_width = 0.42 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_max_volumetric_speed = 15 +filament_minimal_purge_on_wipe_tower = 5 +filament_notes = "List of materials tested with standard PLA print settings for MK3:\n\n\nEsun PLA\nPush PLastic PLA\nInland PLA\n3DXTech PLA" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "Chris Pretty PLA" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +fill_angle = 45 +fill_density = 5% +fill_pattern = rectilinear +first_layer_acceleration = 1000 +first_layer_bed_temperature = 65 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 20 +first_layer_temperature = 215 +gap_fill_speed = 50 +gcode_comments = 0 +gcode_flavor = marlin +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.42 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 20% +infill_speed = 100 +inherits_cummulative = "0.20mm FAST MK3";;"Original Prusa i3 MK3" +interface_shells = 0 +layer_gcode = ;AFTER_LAYER_CHANGE\n +layer_height = 0.2 +machine_max_acceleration_e = 1000,5000 +machine_max_acceleration_extruding = 1500,1250 +machine_max_acceleration_retracting = 1200,1250 +machine_max_acceleration_x = 4000,1000 +machine_max_acceleration_y = 4000,1000 +machine_max_acceleration_z = 400,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 500,200 +machine_max_feedrate_y = 500,200 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 1,2.5 +machine_max_jerk_x = 6,10 +machine_max_jerk_y = 6,10 +machine_max_jerk_z = 0.4,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_fan_speed = 100 +max_layer_height = 0 +max_print_height = 210 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_fan_speed = 100 +min_layer_height = 0 +min_print_speed = 20 +min_skirt_length = 4 +notes = +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_cafile = +octoprint_host = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = MK3_PLA [input_filename_base].gcode +overhangs = 1 +parking_pos_retraction = 92 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.42 +perimeter_speed = 80 +perimeters = 3 +post_process = +print_settings_id = MK3 Pretty PLA +printer_model = MK3 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +printer_settings_id = MK3 Pretty PLA V2 +printer_variant = 0.4 +printer_vendor = +raft_layers = 0 +remaining_times = 1 +resolution = 0 +retract_before_travel = 2 +retract_before_wipe = 10% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 4 +retract_lift = 0.4 +retract_lift_above = 0 +retract_lift_below = 209 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +seam_position = aligned +serial_port = +serial_speed = 250000 +silent_mode = 1 +single_extruder_multi_material = 0 +single_extruder_multi_material_priming = 1 +skirt_distance = 2 +skirt_height = 1 +skirts = 1 +slowdown_below_layer_time = 10 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.42 +solid_infill_speed = 80 +spiral_vase = 0 +standby_temperature_delta = -5 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +start_gcode = M83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; Set extruder temp before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 E8 ; Purge Bubble\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\n +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.42 +support_material_interface_contact_loops = 1 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +temperature = 210 +thin_walls = 1 +threads = 8 +toolchange_gcode = +top_infill_extrusion_width = 0.42 +top_solid_infill_speed = 30 +top_solid_layers = 6 +travel_speed = 120 +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +wipe_into_infill = 0 +wipe_into_objects = 0 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +wiping_volumes_extruders = 70,70 +wiping_volumes_matrix = 0 +xy_size_compensation = 0 +z_offset = 0 diff --git a/MK2/Slic3r/README.md b/MK2/Slic3r/README.md index c969435..1004f2a 100644 --- a/MK2/Slic3r/README.md +++ b/MK2/Slic3r/README.md @@ -20,4 +20,9 @@ Slic3r 1.40.0 Beta profile and above. ### Pretty PETG V3 Profile by Chris Warkocki -Pretty PETG V3. Just fixed a couple things with bridging I didn't like in the V2. Will work on the MK2, MK2s, and the MK3 for certain. \ No newline at end of file +Pretty PETG V3. Just fixed a couple things with bridging I didn't like in the V2. Will work on the MK2, MK2s, and the MK3 for certain. + +### Pretty PLA V3 +Profile by Chris Warkocki + +Profiles time! I fixed the missing z hop necessary in the Pretty PLA profile so enjoy the refined and fixed version right here right now. It will work for certain on the MK2, MK2s, and the MK3. Nothing crazy in there and is just a nice simple profile with many many refinements. \ No newline at end of file diff --git a/MK3/Slic3r/Pretty PLA V3.ini b/MK3/Slic3r/Pretty PLA V3.ini new file mode 100644 index 0000000..c993dad --- /dev/null +++ b/MK3/Slic3r/Pretty PLA V3.ini @@ -0,0 +1,215 @@ +# generated by Slic3r Prusa Edition 1.41.0-beta+ on 2018-08-16 at 11:52:06 +avoid_crossing_perimeters = 0 +bed_shape = 0x0,250x0,250x210,0x210 +bed_temperature = 65 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n\n\n\n\n +between_objects_gcode = +bottom_solid_layers = 3 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 0.95 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4"; +complete_objects = 0 +cooling = 1 +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_acceleration = 1000 +default_filament_profile = "Prusa PLA" +default_print_profile = 0.15mm OPTIMAL MK3 +deretract_speed = 0 +disable_fan_first_layers = 1 +dont_support_bridges = 0 +duplicate_distance = 6 +elefant_foot_compensation = 0 +end_filament_gcode = "; Filament-specific end gcode" +end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 F1000.0 ; set feed rate\nG1 E-3 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X20 Y200; home X axis\n\nM84 ; disable motors\n\n\n +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.42 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_loading_move = -2 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extruder_colour = #00FFFF +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 0.95 +extrusion_width = 0.42 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cooling_final_speed = 3.4 +filament_cooling_initial_speed = 2.2 +filament_cooling_moves = 4 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_load_time = 0 +filament_loading_speed = 28 +filament_max_volumetric_speed = 15 +filament_minimal_purge_on_wipe_tower = 5 +filament_notes = "List of materials tested with standard PLA print settings for MK3:\n\n\nEsun PLA\nPush PLastic PLA\nInland PLA\n3DXTech PLA" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "Chris Pretty PLA" +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PLA +filament_unload_time = 0 +filament_unloading_speed = 90 +fill_angle = 45 +fill_density = 5% +fill_pattern = rectilinear +first_layer_acceleration = 1000 +first_layer_bed_temperature = 65 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 20 +first_layer_temperature = 215 +gap_fill_speed = 50 +gcode_comments = 0 +gcode_flavor = marlin +infill_acceleration = 1500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.42 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 20% +infill_speed = 100 +inherits_cummulative = "0.20mm FAST MK3";;"Original Prusa i3 MK3" +interface_shells = 0 +layer_gcode = ;AFTER_LAYER_CHANGE\n +layer_height = 0.2 +machine_max_acceleration_e = 1000,5000 +machine_max_acceleration_extruding = 1500,1250 +machine_max_acceleration_retracting = 1200,1250 +machine_max_acceleration_x = 4000,1000 +machine_max_acceleration_y = 4000,1000 +machine_max_acceleration_z = 400,200 +machine_max_feedrate_e = 120,120 +machine_max_feedrate_x = 500,200 +machine_max_feedrate_y = 500,200 +machine_max_feedrate_z = 12,12 +machine_max_jerk_e = 1,2.5 +machine_max_jerk_x = 6,10 +machine_max_jerk_y = 6,10 +machine_max_jerk_z = 0.4,0.4 +machine_min_extruding_rate = 0,0 +machine_min_travel_rate = 0,0 +max_fan_speed = 100 +max_layer_height = 0 +max_print_height = 210 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_fan_speed = 100 +min_layer_height = 0 +min_print_speed = 20 +min_skirt_length = 4 +notes = +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_cafile = +octoprint_host = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = MK3_PLA [input_filename_base].gcode +overhangs = 1 +parking_pos_retraction = 92 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.42 +perimeter_speed = 80 +perimeters = 3 +post_process = +print_settings_id = MK3 Pretty PLA +printer_model = MK3 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +printer_settings_id = MK3 Pretty PLA V2 +printer_variant = 0.4 +printer_vendor = +raft_layers = 0 +remaining_times = 1 +resolution = 0 +retract_before_travel = 2 +retract_before_wipe = 10% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 4 +retract_lift = 0.4 +retract_lift_above = 0 +retract_lift_below = 209 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +seam_position = aligned +serial_port = +serial_speed = 250000 +silent_mode = 1 +single_extruder_multi_material = 0 +single_extruder_multi_material_priming = 1 +skirt_distance = 2 +skirt_height = 1 +skirts = 1 +slowdown_below_layer_time = 10 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.42 +solid_infill_speed = 80 +spiral_vase = 0 +standby_temperature_delta = -5 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +start_gcode = M83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; Set extruder temp before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 E8 ; Purge Bubble\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\n +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.42 +support_material_interface_contact_loops = 1 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +temperature = 210 +thin_walls = 1 +threads = 8 +toolchange_gcode = +top_infill_extrusion_width = 0.42 +top_solid_infill_speed = 30 +top_solid_layers = 6 +travel_speed = 120 +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +wipe_into_infill = 0 +wipe_into_objects = 0 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +wiping_volumes_extruders = 70,70 +wiping_volumes_matrix = 0 +xy_size_compensation = 0 +z_offset = 0 diff --git a/MK3/Slic3r/README.md b/MK3/Slic3r/README.md index 53652dd..632aaa7 100644 --- a/MK3/Slic3r/README.md +++ b/MK3/Slic3r/README.md @@ -1,24 +1,5 @@ # Slic3r profiles for Prusa i3 MK3 -### MK3 Pretty PETG Profile -Profile by Chris Warkocki - -Even though I'm swamped with work I've had to reprint some parts lately and put together a nice PETG profile for parts that doubles as a nice pretty PETG profile. - -Feel free to adjust the infill as I'm having a kick using gyroid but all in all this is just a nice simple PETG profile that should give you good results fo general prints and parts for upgrades. - -Created in and for Slic3r 1.40.0 Beta for the MK3 but this will work just fine on a MK2.5 and MK2s. -### MK3 Pretty PLA Profile -Profile by Chris Warkocki - -The best things comes in threes. So we have a nice new PETG profile for slic3r, a speed PLA profile, but it's time to take everything I learned from my last profile that I did wrong and redo it and finalize it a bit. - -I got some great feedback and went back to the drawing board and viola we have a preset made for pretty prints using PLA. This will work on the MK3 only. - -I've zoned the speeds as best as possible to reduce motor resonance as well as other printing artifacts. - -Enjoy and don't forget to keep on printing. - ### MK3 Speed PLA Profile Profile by Chris Warkocki @@ -28,11 +9,6 @@ These speeds are more in the MK3 realm so I wouldn't use this for the MK2s or MK Best with Slic3r 1.40.0 beta and above. -### Chris MK3 PLA V3 -Profile by Chris Warkocki - -I'm way slower than normal but it's time for an official update to the Slic3r 1.40 alpha 1 profile from me. This is very specific and targeted directly at those with issues of uneven extrusion on the MK3. After 3 weeks and lots of brainstorming I've taken a lot of input from smart people and tweaked the living poop out of it. I'm happy to say that initial prints on various MK3's show improvement to the extrusion issue. - ### pp_tpu_config Profile by Paul Park @@ -62,18 +38,6 @@ Getting it water tight is another story but I promise it shouldn't leak out the Make sure you adjust the layer height based on the intricacies of the model. at the stock 0.30mm layer height objects like the Easter Island head will have gaps so make sure to spend time looking at the layer visualizer as well making sure you don't print over a 45 degree angle. Single walls are near impossible to get harsh angles. -### MK3 Pretty PETG V2 -Profile by Chris Warkocki - -I couldn't just post post a PLA profile so here is the update PETG profile. This one is a little faster than the last one but still gives really nice results. Again, no ooze while mesh leveling and the special purge bubble in the beginning to prime the nozzle just right for PETG. Happy printing! - -### MK3 Pretty PLA V2 -Profile by Chris Warkocki - -The latest and greatest release of Slic3r PE has finally hit. I've been waiting for a couple bug fixes before launching an all new profile and it just dropped an hour ago. Welcome to Slic3r PE 1.41.0 BETA. - -A few refinements and adjustments based on the all new jerk and acceleration menu as well as refinements to the start and end gcode. Goodbye blobs on the bed. Have fun and happy printing. - ### NylonX NylonX Slic3r profile by Evan Lloyd @@ -85,4 +49,9 @@ Here are my profiles for water-tight vases. I started with Chris Warkocki Pretty ### Pretty PETG V3 Profile by Chris Warkocki -Pretty PETG V3. Just fixed a couple things with bridging I didn't like in the V2. Will work on the MK2, MK2s, and the MK3 for certain. \ No newline at end of file +Pretty PETG V3. Just fixed a couple things with bridging I didn't like in the V2. Will work on the MK2, MK2s, and the MK3 for certain. + +### Pretty PLA V3 +Profile by Chris Warkocki + +Profiles time! I fixed the missing z hop necessary in the Pretty PLA profile so enjoy the refined and fixed version right here right now. It will work for certain on the MK2, MK2s, and the MK3. Nothing crazy in there and is just a nice simple profile with many many refinements. \ No newline at end of file diff --git a/MK3/Slic3r/Chris MK3 PLA V3.ini b/MK3/Slic3r/archive/Chris MK3 PLA V3.ini similarity index 100% rename from MK3/Slic3r/Chris MK3 PLA V3.ini rename to MK3/Slic3r/archive/Chris MK3 PLA V3.ini diff --git a/MK3/Slic3r/MK3 Pretty PETG Profile.ini b/MK3/Slic3r/archive/MK3 Pretty PETG Profile.ini similarity index 100% rename from MK3/Slic3r/MK3 Pretty PETG Profile.ini rename to MK3/Slic3r/archive/MK3 Pretty PETG Profile.ini diff --git a/MK3/Slic3r/MK3 Pretty PETG V2.ini b/MK3/Slic3r/archive/MK3 Pretty PETG V2.ini similarity index 100% rename from MK3/Slic3r/MK3 Pretty PETG V2.ini rename to MK3/Slic3r/archive/MK3 Pretty PETG V2.ini diff --git a/MK3/Slic3r/MK3 Pretty PLA Profile.ini b/MK3/Slic3r/archive/MK3 Pretty PLA Profile.ini similarity index 100% rename from MK3/Slic3r/MK3 Pretty PLA Profile.ini rename to MK3/Slic3r/archive/MK3 Pretty PLA Profile.ini diff --git a/MK3/Slic3r/MK3 Pretty PLA V2.ini b/MK3/Slic3r/archive/MK3 Pretty PLA V2.ini similarity index 100% rename from MK3/Slic3r/MK3 Pretty PLA V2.ini rename to MK3/Slic3r/archive/MK3 Pretty PLA V2.ini diff --git a/MK3/Slic3r/archive/README.md b/MK3/Slic3r/archive/README.md new file mode 100644 index 0000000..25b09a2 --- /dev/null +++ b/MK3/Slic3r/archive/README.md @@ -0,0 +1,44 @@ +# Profile archives + +The profiles here have been updated, but I am keeping them in case there are some compatibility issues with the older software. + +### MK3 Pretty PETG Profile +Profile by Chris Warkocki + +Even though I'm swamped with work I've had to reprint some parts lately and put together a nice PETG profile for parts that doubles as a nice pretty PETG profile. + +Feel free to adjust the infill as I'm having a kick using gyroid but all in all this is just a nice simple PETG profile that should give you good results fo general prints and parts for upgrades. + +Created in and for Slic3r 1.40.0 Beta for the MK3 but this will work just fine on a MK2.5 and MK2s. + +### MK3 Pretty PLA Profile +Profile by Chris Warkocki + +The best things comes in threes. So we have a nice new PETG profile for slic3r, a speed PLA profile, but it's time to take everything I learned from my last profile that I did wrong and redo it and finalize it a bit. + +I got some great feedback and went back to the drawing board and viola we have a preset made for pretty prints using PLA. This will work on the MK3 only. + +I've zoned the speeds as best as possible to reduce motor resonance as well as other printing artifacts. + +Enjoy and don't forget to keep on printing. + + +Best with Slic3r 1.40.0 beta and above. + +### Chris MK3 PLA V3 +Profile by Chris Warkocki + +I'm way slower than normal but it's time for an official update to the Slic3r 1.40 alpha 1 profile from me. This is very specific and targeted directly at those with issues of uneven extrusion on the MK3. After 3 weeks and lots of brainstorming I've taken a lot of input from smart people and tweaked the living poop out of it. I'm happy to say that initial prints on various MK3's show improvement to the extrusion issue. + + +### MK3 Pretty PETG V2 +Profile by Chris Warkocki + +I couldn't just post post a PLA profile so here is the update PETG profile. This one is a little faster than the last one but still gives really nice results. Again, no ooze while mesh leveling and the special purge bubble in the beginning to prime the nozzle just right for PETG. Happy printing! + +### MK3 Pretty PLA V2 +Profile by Chris Warkocki + +The latest and greatest release of Slic3r PE has finally hit. I've been waiting for a couple bug fixes before launching an all new profile and it just dropped an hour ago. Welcome to Slic3r PE 1.41.0 BETA. + +A few refinements and adjustments based on the all new jerk and acceleration menu as well as refinements to the start and end gcode. Goodbye blobs on the bed. Have fun and happy printing.