Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

executable file 1227 lines (1103 sloc) 32.874 kb
#! /bin/sh
#
# %CopyrightBegin%
#
# Copyright Ericsson AB 2002-2011. All Rights Reserved.
#
# The contents of this file are subject to the Erlang Public License,
# Version 1.1, (the "License"); you may not use this file except in
# compliance with the License. You should have received a copy of the
# Erlang Public License along with this software. If not, it can be
# retrieved online at http://www.erlang.org/.
#
# Software distributed under the License is distributed on an "AS IS"
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
# the License for the specific language governing rights and limitations
# under the License.
#
# %CopyrightEnd%
#
# Expected autoconf version
EXPECTED_AUTOCONF_VERSION=2.59
# Global configuration variables
#
# NOTE: lazy_configure depends on '.' always being last directory
if [ -z "$ONLY_ERTS" ]; then
AUTOCONF_SUBDIRS="lib lib/* lib/test_server/src"
fi
AUTOCONF_SUBDIRS="$AUTOCONF_SUBDIRS erts ."
# `bootstrap_apps' should include application that are built, or
# partly built in one of the bootstrap phases. Applications that
# only get some static includes copied into the bootstrap directory
# should not be included.
bootstrap_apps="erts lib/asn1 lib/compiler lib/hipe lib/ic lib/kernel lib/parsetools lib/sasl lib/snmp lib/stdlib lib/syntax_tools"
# We will quote a bit more than needed, but the important thing is that
# all that needs quoting will be quoted...
DONT_QUOTE="A-Za-z0-9~/=_+-"
# Utility functions
usage ()
{
echo "Available options (-a switch select all applications):"
echo " setup [-a] [<configure parameters>] - does autoconf, configure and boot."
echo " all [-a] <dir> - does autoconf, configure, boot, release"
echo " autoconf - (re)build the configure scripts"
echo " configure [<configure parameters>] - does the actual configuration"
echo " boot [-a] - bootstraps and builds the system (after configure)"
echo " release <target_dir> - creates a small release to <target_dir>"
echo " release [-a] <target_dir> - creates full release to <target_dir>"
echo " smp [-a] - build an Erlang system, smp flavor only"
echo " hybrid [-a] - build an Erlang system, hybrid flavor only"
echo " tests <dir> - Build testsuites to <dir>"
echo ""
echo "These are for cleaning up an open source distribution"
echo "with prebuilt files, so that it resembles the clean developers"
echo "codebase:"
echo " remove_prebuilt_files - create a minimal source tree"
echo " save_bootstrap - recreate primary bootstrap"
echo ""
echo "Special targets for Windows(tm) build:"
echo " debuginfo_win32 <dir> - adds debug emulator and pdb files to <dir>"
echo " installer_win32 <dir> - creates a windows installer from <dir>"
echo ""
echo "Before trying to build on windows, consider the following option"
echo " env_win32 - echo environment settings for win32 with visual C++, use with eval"
echo " env_mingw32 - echo environment settings for win32 with MinGW, use with eval"
echo ""
echo "Before trying to build for vxworks, consider the following option"
echo " env_vxworks <cpu> - echo environment settings for vxworks, use with eval"
echo ""
case $version_controller in
none)
;;
git)
echo ""
echo "update_primary - build and commit a new primary bootstrap"
;;
esac
case $version_controller in
none)
;;
git)
echo ""
echo "update_preloaded - build and commit the preloaded modules"
;;
esac
}
git_required ()
{
echo "This operation must be run in a git repository."
exit 1
}
hide_vars ()
{
script=
for var in "$@"; do
if [ "X$var" != "X" ]; then
script="$script test \"X\$$var\" = \"X\" || hidden_$var=\$$var; unset $var;"
fi
done
if [ "X$script" != "X" ]; then
eval "$script"
fi
unset script
}
restore_vars ()
{
script=
for var in "$@"; do
if [ "X$var" != "X" ]; then
script="$script unset $var; test \"X\$hidden_$var\" = \"X\" || { $var=\$hidden_$var; export $var; } ; unset hidden_$var;"
fi
done
if [ "X$script" != "X" ]; then
eval "$script"
fi
unset script
}
check_erltop ()
{
ERLTOP_FORCED=false
if [ "X$ERL_TOP" = "X" ]; then
if [ -f ./otp_build -a -f ./erts/autoconf/config.guess ]; then
ERLTOP_FORCED=true
ERL_TOP=`/bin/pwd`
export ERL_TOP
else
echo "The environment variable ERL_TOP must be set." >&2
exit 1
fi
fi
}
target_contains ()
{
Y=`echo $TARGET | sed "s,$1,,g"`
[ X"$Y" != X"$TARGET" ]
return $?
}
determine_version_controller ()
{
version_controller=none
# The current directory is now $ERL_TOP. Find out whether
# this directory is a git repository.
if { git rev-parse --git-dir; } 2>/dev/null >/dev/null; then
version_controller=git
fi
}
# Execution of the different options
# Special static config flags for certain platforms are set here
set_config_flags ()
{
# * Extra flags to pass to configure are placed in `CONFIG_FLAGS'.
# * The command line is no longer added to `CONFIG_FLAGS' by
# `set_config_flags'. It is instead passed directly to
# `run_configure', or added to `CONFIG_FLAGS' at some other
# place.
# * `CONFIG_FLAGS' may contain flags when `set_config_flags' is
# called. These flags should survive the call to `set_config_flags'
# (in the cross compilation case the whole command line as well as
# the cross configuration have been moved here).
if target_contains linux; then
XX=`echo $* | grep -v able-hipe`
if [ "$*" = "$XX" ]; then
CONFIG_FLAGS="$CONFIG_FLAGS --disable-hipe"
fi
fi
if target_contains "univel-sysv4"; then
CONFIG_FLAGS="$CONFIG_FLAGS --x-libraries=/usr/lib/X11"
fi
if target_contains free_source; then
CONFIG_FLAGS="$CONFIG_FLAGS --host=$TARGET"
fi
# Link SSL static for all binary distributions if not overridden
# Even for win32 starting with R14B03
XX=`echo $* | grep -v dynamic-ssl-lib`
if [ "$*" = "$XX" ]; then
CONFIG_FLAGS="--disable-dynamic-ssl-lib $CONFIG_FLAGS"
fi
if target_contains win32; then
CONFIG_FLAGS="--build=$BUILDSYS build_alias=win32 --host=win32 --target=win32 $CONFIG_FLAGS"
fi
if [ "x$OVERRIDE_CONFIG_CACHE" = "x" ]; then
CONFIG_FLAGS="$CONFIG_FLAGS --cache-file=/dev/null"
else
CONFIG_FLAGS="$CONFIG_FLAGS --cache-file=$OVERRIDE_CONFIG_CACHE"
fi
env_to_config_flags $erl_build_tool_vars
export CONFIG_FLAGS;
}
NL="\
"
create_lib_configure_in()
{
cd $ERL_TOP
# Multiple versions of autoconf generates code that
# don't work on all platforms (e.g. SunOS 5.8) if
# sub directories are soft links. Internally at Ericsson
# some OTP application directories are soft links.
# An added "/." solves this problem.
sdirs=
for lib_app in $bootstrap_apps; do
case $lib_app in
lib/*)
if [ -f "$lib_app/configure.in" ]; then
app=`echo "$lib_app" | sed "s|lib/\(.*\)|\1|"`
sdirs="${sdirs}test ! -f $app/configure || AC_CONFIG_SUBDIRS($app/.)${NL}"
fi;;
*)
;;
esac
done
sed_bootstrap="s%@BOOTSTRAP_CONFIGURE_APPS@%$sdirs%g"
sdirs=
for lib_app in lib/*; do
is_bapp=false
for bapp in $bootstrap_apps; do
test $bapp != $lib_app || { is_bapp=true; break; }
done
if [ $is_bapp = false ] && [ -f "$lib_app/configure.in" ]; then
app=`echo "$lib_app" | sed "s|lib/\(.*\)|\1|"`
sdirs="${sdirs} test ! -f $app/configure || AC_CONFIG_SUBDIRS($app/.)${NL}"
fi
done
sed_non_bootstrap="s%@NON_BOOTSTRAP_CONFIGURE_APPS@%$sdirs%g"
rm -f lib/configure.in
sed "$sed_bootstrap;$sed_non_bootstrap" > lib/configure.in < lib/configure.in.src || {
echo "Failed to create lib/configure.in"
exit 1
}
}
do_autoconf ()
{
create_lib_configure_in
if target_contains win32; then
# Select the correct autoconf on cygwin
save_want_autoconf_ver=$WANT_AUTOCONF_VER
WANT_AUTOCONF_VER=$EXPECTED_AUTOCONF_VERSION
export WANT_AUTOCONF_VER
fi
exp_ac_vsn=$EXPECTED_AUTOCONF_VERSION
ac_vsn_blob=`autoconf --version`
ac_vsn=`echo x$ac_vsn_blob | sed "s|[^0-9]*\([0-9][^ \t\n]*\).*|\1|"`
case "$ac_vsn" in
$exp_ac_vsn)
;;
*)
echo "***************************************************" 1>&2
echo "***************************************************" 1>&2
echo "*** WARNING: System might fail to configure or" 1>&2
echo "*** might be erroneously configured" 1>&2
echo "*** since autoconf version $ac_vsn is used" 1>&2
echo "*** instead of version $exp_ac_vsn!" 1>&2
echo "***************************************************" 1>&2
echo "***************************************************" 1>&2
;;
esac
if [ ! -z "$OVERRIDE_CONFIGURE" ]; then
echo "Autoconf disabled on target $TARGET, but is performed on host" >&2
# We still use erts configure for erl_interface and VxWorks
case "$TARGET" in
*vxworks*)
AUTOCONF_SUBDIRS=`echo $AUTOCONF_SUBDIRS | \
sed -e 's,lib/erl_interface,,' \
-e 's,lib/gs,,' \
-e 's,lib/megaco,,'`
;;
esac
fi
hide_vars OVERRIDE_TARGET TARGET
TARGET=$BUILDSYS
export TARGET
for d in $AUTOCONF_SUBDIRS; do
file="$d/configure.in"
[ -f "$file" ] || continue
echo ""
[ ! -d "$d/autom4te.cache" ] || {
echo "=== cleaning $d/autom4te.cache"
rm -f "$d"/autom4te.cache/*
}
echo "=== running autoconf in $d"
( cd "$d" && autoconf ) || exit 1
chdr=`cat "$file" | sed -n "s|.*\(AC_CONFIG_HEADER\).*|\1|p"`
[ "$chdr" = "AC_CONFIG_HEADER" ] || continue
echo "=== running autoheader in $d"
( cd "$d" && autoheader ) || exit 1
done
restore_vars OVERRIDE_TARGET TARGET
if target_contains win32; then
WANT_AUTOCONF_VER=$save_want_autoconf_ver
export WANT_AUTOCONF_VER
fi
}
mk_targetdir ()
{
if [ ! -d $ERL_TOP/$TARGET ]; then
echo "creating $ERL_TOP/$TARGET"
mkdir $ERL_TOP/$TARGET
else
echo "existing $ERL_TOP/$TARGET is used"
fi
}
run_configure ()
{
cdir="$ERL_TOP"
[ -z "$ONLY_ERTS" ] || {
cdir="$ERL_TOP/erts"
CONFIG_FLAGS="$CONFIG_FLAGS --no-recursion"
}
echo "$cdir/configure $CONFIG_FLAGS" ${1+"$@"}
(cd "$cdir" && $config_eval ./configure $CONFIG_FLAGS ${1+"$@"}) || exit 1
}
env_to_config_flags ()
{
for env_var in "$@"; do
script="echo $env_var=\$$env_var; unset $env_var >/dev/null 2>&1"
env_arg=`eval $script`
case $env_arg in
"$env_var=")
;;
*[!$DONT_QUOTE]*)
config_eval=eval
new_arg=`echo "X$env_arg" | sed "s|^X||;s|\([^$DONT_QUOTE]\)|\\\\\\\\\1|g"`
CONFIG_FLAGS="$CONFIG_FLAGS $new_arg";;
*)
CONFIG_FLAGS="$CONFIG_FLAGS $env_arg";;
esac
eval unset $env_var
done
}
try_cross_configure ()
{
cross_configure=no
host_value=
build_value=
# Get `erl_xcomp_vars'
. "$ERL_TOP/xcomp/erl-xcomp-vars.sh" || exit 1
for arg in ${1+"$@"}; do
case "$arg" in
--host=*)
host_value=`echo $x | sed "s|^--host=\(.*\)|\1|"`;;
--build=*)
build_value=`echo $x | sed "s|^--build=\(.*\)|\1|"`;;
--xcomp-conf=*)
cross_configure=yes;;
*)
;;
esac
done
test $cross_configure = yes || {
test "X$host_value" = "X" || {
test "X$build_value" != "X" || build_value="$BUILDSYS"
build_sys=`$ERL_TOP/erts/autoconf/config.sub "$build_value"` || exit 1
host_sys=`$ERL_TOP/erts/autoconf/config.sub "$host_value"` || exit 1
test "$host_sys" = "$build_sys" || cross_configure=yes
}
}
test $cross_configure = yes || return 1
# cross configure...
CONFIG_FLAGS=
env_to_config_flags $erl_build_tool_vars $erl_xcomp_vars
for arg in ${1+"$@"}; do
case "$arg" in
--host=*)
host_value=`echo $x | sed "s|^--host=\(.*\)|\1|"`;;
--build=*)
build_value=`echo $x | sed "s|^--build=\(.*\)|\1|"`;;
--xcomp-conf=*)
# tilde expansion is not handled by the `configure' script,
# but we do it for this argument. This argument is however not
# a `configure' argument.
xcomp_conf=`echo "X$arg" | sed "s|^X--xcomp-conf=\(.*\)\$|\1|g;s|\([^$DONT_QUOTE]\)|\\\\\\\\\1|g"`
eval "xcomp_conf=$xcomp_conf"
test "X$xcomp_conf" != "X" || {
echo "$0: Missing xcomp-conf file name"
exit 1
}
test -f "$xcomp_conf" || {
echo "$0: Missing xcomp-conf file: $xcomp_conf"
exit 1
}
. "$xcomp_conf"
test $? -eq 0 || {
echo "$0: Failed to read xcomp-conf file: $xcomp_conf"
exit 1
}
test "X$erl_xcomp_build" = "X" || build_value="$erl_xcomp_build"
test "X$erl_xcomp_host" = "X" || host_value="$erl_xcomp_host"
unset erl_xcomp_build
unset erl_xcomp_host
CONFIG_FLAGS="$CONFIG_FLAGS $erl_xcomp_configure_flags"
unset erl_xcomp_configure_flags
env_to_config_flags $erl_build_tool_vars $erl_xcomp_vars;;
*[!$DONT_QUOTE]*)
config_eval=eval
new_arg=`echo "X$arg" | sed "s|^X||;s|\([^$DONT_QUOTE]\)|\\\\\\\\\1|g"`
CONFIG_FLAGS="$CONFIG_FLAGS $new_arg";;
*)
CONFIG_FLAGS="$CONFIG_FLAGS $arg";;
esac
done
CONFIG_FLAGS="--host=$host_value $CONFIG_FLAGS"
test "X$build_value" != "Xguess" || build_value="$BUILDSYS"
test "X$build_value" = "X" || CONFIG_FLAGS="--build=$build_value $CONFIG_FLAGS"
# Configure build system for boot strap
cat <<EOF
*
* Configuring the bootstrap build system...
*
EOF
# hide build tools environment which is for the cross configure
set_config_flags $CONFIG_FLAGS
hide_vars CONFIG_FLAGS
set_config_flags
run_configure --enable-bootstrap-only
# restore the hidden build tools environment for the cross configure
restore_vars CONFIG_FLAGS
COMPFIX=""
cat <<EOF
*
* Configuring the cross host system ($host_value)...
*
EOF
# We don't pass the command line here since we already have moved it
# into CONFIG_FLAGS
run_configure
return 0
}
maybe_copy_static_cache ()
{
if [ '!' -z "$OVERRIDE_CONFIG_CACHE_STATIC" ]; then
if [ '!' -z "$OVERRIDE_CONFIG_CACHE" ]; then
cp -f "$OVERRIDE_CONFIG_CACHE_STATIC" "$OVERRIDE_CONFIG_CACHE"
fi
fi
}
do_configure ()
{
setup_make
mk_targetdir
# Get `erl_build_tool_vars'
. "$ERL_TOP/erl-build-tool-vars.sh" || exit 1
if [ ! -z "$OVERRIDE_CONFIGURE" ]; then
case $TARGET in
vxworks_*)
( cd erts/autoconf && \
$ERL_TOP/erts/autoconf/configure.vxworks $TARGET )
echo "Configuring for build system too..." >&2
hide_vars OVERRIDE_TARGET TARGET
TARGET=$BUILDSYS
export TARGET
mk_targetdir
set_config_flags "$@"
run_configure "$@"
restore_vars OVERRIDE_TARGET TARGET;;
*)
echo "Unexpected target when ordinary configure is" \
"overridden" >&2
echo 'check if $OVERRIDE_CONFIGURE and $OVERRIDE_TAGET' \
'environments are correct.' >&2
exit 1;;
esac
else
maybe_copy_static_cache
try_cross_configure "$@"
if [ $cross_configure = no ]; then
CONFIG_FLAGS=
set_config_flags "$@"
run_configure "$@"
fi
fi
}
do_lazy_configure ()
{
setup_make
if [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then
echo "Not supported for cross compilation" >&2
exit 1
fi
maybe_copy_static_cache
CONFIG_FLAGS=
set_config_flags "$@"
CONFIGURE_FLAGS="$@"
[ "$CONFIG_FLAGS" = "" ] || CONFIGURE_FLAGS="$CONFIG_FLAGS $CONFIGURE_FLAGS"
for c_dir in $AUTOCONF_SUBDIRS; do
if test -f $ERL_TOP/$c_dir/configure.in; then
dir=$ERL_TOP/$c_dir
echo ""
echo "=== Begin configuring $dir"
xc_dep= ;
xcs_dep= ;
test -d $dir/$TARGET || mkdir $dir/$TARGET
test -f $dir/aclocal.m4 && xc_dep="$xcs_dep $dir/aclocal.m4"
test -f $dir/acsite.m4 && xc_dep="$xcs_dep $dir/acsite.m4"
test x$c_dir = x"erts" && xcs_dep="$xcs_dep $dir/config.h.in"
$MAKE -f $ERL_TOP/make/lazy_configure.mk \
MAKE="$MAKE" TARGET=$TARGET \
ERL_TOP=$ERL_TOP \
CONFIGURE_FLAGS="$CONFIGURE_FLAGS" \
CONFIGURE_DIR=$dir \
EXTRA_CONFIGURE_DEPENDENCIES=$xc_dep \
EXTRA_CONFIG_STATUS_DEPENDENCIES=$xcs_dep \
EXPECTED_AUTOCONF_VERSION=$EXPECTED_AUTOCONF_VERSION \
lazy_configure
echo "=== Done configuring $dir"
echo ""
fi
done
}
do_lazy_configure_clean ()
{
setup_make
if [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then
echo "Not supported for cross compilation" >&2
exit 1
fi
for c_dir in $AUTOCONF_SUBDIRS; do
if test -f $ERL_TOP/$c_dir/configure.in; then
dir=$ERL_TOP/$c_dir
echo ""
echo "=== Begin cleaning configure in $dir"
xc_dep= ;
xcs_dep= ;
test -d $dir/$TARGET || mkdir $dir/$TARGET
test -f $dir/aclocal.m4 && xc_dep="$xcs_dep $dir/aclocal.m4"
test -f $dir/acsite.m4 && xc_dep="$xcs_dep $dir/acsite.m4"
test x$c_dir = x"erts" && xcs_dep="$xcs_dep $dir/config.h.in"
$MAKE -f $ERL_TOP/make/lazy_configure.mk \
MAKE="$MAKE" TARGET=$TARGET \
ERL_TOP=$ERL_TOP \
CONFIGURE_DIR=$dir \
EXPECTED_AUTOCONF_VERSION=$EXPECTED_AUTOCONF_VERSION \
lazy_configure_clean
echo "=== Done cleaning configure in $dir"
echo ""
fi
done
}
do_lazy_configure_target_clean ()
{
setup_make
if [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then
echo "Not supported for cross compilation" >&2
exit 1
fi
for c_dir in $AUTOCONF_SUBDIRS; do
if test -f $ERL_TOP/$c_dir/configure.in; then
dir=$ERL_TOP/$c_dir
echo ""
echo "=== Begin target cleaning configure in $dir"
xc_dep= ;
xcs_dep= ;
test -d $dir/$TARGET || mkdir $dir/$TARGET
test -f $dir/aclocal.m4 && xc_dep="$xcs_dep $dir/aclocal.m4"
test -f $dir/acsite.m4 && xc_dep="$xcs_dep $dir/acsite.m4"
test x$c_dir = x"erts" && xcs_dep="$xcs_dep $dir/config.h.in"
$MAKE -f $ERL_TOP/make/lazy_configure.mk \
MAKE="$MAKE" TARGET=$TARGET \
ERL_TOP=$ERL_TOP \
CONFIGURE_DIR=$dir \
EXPECTED_AUTOCONF_VERSION=$EXPECTED_AUTOCONF_VERSION \
lazy_configure_target_clean
echo "=== Done target cleaning configure in $dir"
echo ""
fi
done
}
echo_setenv ()
{
case "$DAILY_BUILD_SCRIPT$SHELL" in
true*)
echo "$1=$2";;
*ash|*ksh|*/sh|*zsh|*ash)
echo "$1=\"$2\";export $1$3";;
*csh)
echo "setenv $1 \"$2\"$3";;
esac
}
echo_env_bootstrap ()
{
boot_bin=$BOOTSTRAP_ROOT/bootstrap/bin
echo_setenv PATH $boot_bin:$PATH
}
echo_env_erltop ()
{
if [ X"$ERL_TOP" = X"" -o "$ERLTOP_FORCED" = "true" ]; then
if [ -f ./otp_build ]; then
# Seems to be current directory...
echo_setenv ERL_TOP `/bin/pwd` ';'
else
echo "You need to either set ERL_TOP first or stand in the same" \
"directory as this script resides in." >&2
exit 1
fi
fi
}
echo_envinfo ()
{
case "$SHELL" in
*csh)
return 0
;;
*)
;;
esac
if [ X"$DAILY_BUILD_SCRIPT" = X"true" ]; then
echo '# Output generated for daily build script only '\
'($DAILY_BUILD_SCRIPT=true)'
else
echo '# Please note:'
echo '# The command you are running is supposed to be run'\
'using the shells'
echo '# "eval" builtin, like in:'
echo '# $ eval `./otp_build env_<something>`'
echo '# If you see this comment, you probably haven'"'"'t done that.'
fi
}
echo_env_vxworks ()
{
if [ -z "$1" ]; then
echo "env_vxworks requires CPU architecture as parameter (ppc603, ppc860 etc)." >&2
exit 1
fi
echo_env_erltop
echo_setenv OVERRIDE_CONFIGURE true ';'
echo_setenv OVERRIDE_TARGET vxworks_$1
echo_envinfo
}
echo_env_win32 ()
{
#echo_envinfo
if [ X"$SHELL" = X"" ]; then
echo "You need to export the shell variable first," \
"for bourne-like shells, type:" >&2
echo 'export SHELL' >&2
echo "and for csh-like shells, type:" >&2
echo 'setenv SHELL $SHELL' >&2
echo " - then try again." >&2
exit 1
fi
echo_env_erltop
# Try to cope with paths containing unexpected things like stray
# mixed paths (c:/something/bin) and quotes. Only C and D drive
# handled.
CCYGPATH=`cygpath c:\\`
DCYGPATH=`cygpath d:\\`
P2=`echo :$PATH | \
sed "s,\",,g;s,:[cC]:,:$CCYGPATH,g;s,:[dD]:,:$DCYGPATH,g;s,^:,,"`
P3=""
save_ifs=$IFS
IFS=:
for p in $P2; do
if [ -d "$p" ]; then
C1="`(cygpath -d $p 2>/dev/null || cygpath -w $p)`" 2> /dev/null
C2=`cygpath "$C1" 2> /dev/null` 2> /dev/null
else
C2=""
fi
if [ ! -z "$C2" ]; then
if [ -z "$P3" ];then
P3="$C2"
else
P3="$P3:$C2"
fi
fi
done
IFS=$save_ifs
echo_setenv OVERRIDE_TARGET win32 ';'
echo_setenv CC cc.sh ';'
echo_setenv CXX cc.sh ';'
echo_setenv AR ar.sh ';'
echo_setenv RANLIB true ';'
if [ -f "$ERL_TOP/erts/autoconf/win32.config.cache.static" ]; then
echo_setenv OVERRIDE_CONFIG_CACHE_STATIC "$ERL_TOP/erts/autoconf/win32.config.cache.static" ';'
fi
echo_setenv OVERRIDE_CONFIG_CACHE "$ERL_TOP/erts/autoconf/win32.config.cache" ';'
echo_setenv PATH "$ERL_TOP/erts/etc/win32/cygwin_tools/vc:$ERL_TOP/erts/etc/win32/cygwin_tools:$P3" ';'
echo_envinfo
}
echo_env_mingw32 ()
{
#echo_envinfo
if [ X"$SHELL" = X"" ]; then
echo "You need to export the shell variable first," \
"for bourne-like shells, type:" >&2
echo 'export SHELL' >&2
echo "and for csh-like shells, type:" >&2
echo 'setenv SHELL $SHELL' >&2
echo " - then try again." >&2
exit 1
fi
echo_env_erltop
CCYGPATH=`cygpath c:\\`
DCYGPATH=`cygpath d:\\`
P2=`echo :$PATH | \
sed "s,\",,g;s,:[cC]:,:$CCYGPATH,g;s,:[dD]:,:$DCYGPATH,g;s,^:,,"`
P3=""
save_ifs=$IFS
IFS=:
for p in $P2; do
if [ -d "$p" ]; then
C1="`(cygpath -d $p 2>/dev/null || cygpath -w $p)`" 2> /dev/null
C2=`cygpath "$C1" 2> /dev/null` 2> /dev/null
else
C2=""
fi
if [ ! -z "$C2" ]; then
if [ -z "$P3" ];then
P3="$C2"
else
P3="$P3:$C2"
fi
fi
done
found=false
for p in $P3; do
if [ -f "$p/mingw32-gcc.exe" ]; then
found=$p
fi
done
found2=false
for p in $P3; do
if [ -f "$p/wmc.exe" ]; then
found2=$p
fi
done
IFS=$save_ifs
if [ X"$found" = X"false" ]; then
echo "Could not find mingw32-gcc in PATH, build with mingw not possible!" >&2
return
fi
if [ X"$found2" = X"false" ]; then
echo "Could not find wmc.exe in PATH, part of wine for windows, " >&2
echo "needed for message file compilation: http://wine.sourceforge.net!!" >&2
return
fi
echo_setenv OVERRIDE_TARGET win32 ';'
echo_setenv MINGW_EXE_PATH $found ';'
echo_setenv WINE_EXE_PATH $found2 ';'
echo_setenv CC cc.sh ';'
echo_setenv CXX cc.sh ';'
echo_setenv AR ar.sh ';'
echo_setenv RANLIB true ';'
echo_setenv PATH "$ERL_TOP/erts/etc/win32/cygwin_tools/mingw:$ERL_TOP/erts/etc/win32/cygwin_tools:$P3"
echo_envinfo
}
lookup_prog_in_path ()
{
PROG=$1
save_ifs=$IFS
IFS=:
for p in $PATH; do
# In cygwin the programs are not always executable and have .exe suffix...
if [ "X$TARGET" = "Xwin32" ]; then
if [ -f $p/$PROG.exe ]; then
echo $p/$PROG
break;
fi
else
if [ -x $p/$PROG ]; then
echo $p/$PROG
break;
fi
fi
done
IFS=$save_ifs
}
setup_make ()
{
if [ -z "$MAKE" ]; then
case $TARGET in
win32)
MAKE=make;;
*)
if [ -n "`lookup_prog_in_path gmake`" ]; then
MAKE=gmake
else
MAKE=make
fi;;
esac
fi
export MAKE
}
do_primary_git ()
{
setup_make
if [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then
do_primary_cross
else
$MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET primary_bootstrap || exit 1;
fi
git add -A bootstrap/lib/kernel \
bootstrap/lib/stdlib \
bootstrap/lib/compiler \
bootstrap/lib/orber/include \
bootstrap/bin
find bootstrap -name egen -o -name '*.script' -o \
-name '*.app' -o -name '*.appup' |
xargs git reset HEAD
git commit --no-verify -m 'Update primary bootstrap'
}
do_update_prel_git ()
{
setup_make
(cd $ERL_TOP/erts/preloaded/src && $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET clean)
$MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET preloaded || exit 1
(cd $ERL_TOP/erts/preloaded/src && $MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET copy)
git add -A $ERL_TOP/erts/preloaded/ebin/*.beam
git commit -m 'Update preloaded modules'
}
do_boot ()
{
setup_make
# Bootstrap if we are cross compiling
if [ X`$MAKE is_cross_configured` = Xyes ]; then
TARGET=$BUILDSYS
$MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT CROSS_COMPILING=no TARGET=$TARGET bootstrap || exit 1
TARGET=`$MAKE target_configured`
elif [ "x$OVERRIDE_TARGET" != "x" -a "x$OVERRIDE_TARGET" != "xwin32" ]; then
hide_vars OVERRIDE_TARGET TARGET
TARGET=$BUILDSYS
$MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET bootstrap || exit 1
restore_vars OVERRIDE_TARGET TARGET
fi
# Build it (including bootstrap if not cross compiling)
$MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET all || exit 1
}
do_boot_emu ()
{
setup_make
if [ X`$MAKE is_cross_configured` = Xyes ]; then
TARGET=`$MAKE target_configured`
fi
$MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET emulator || exit 1
}
do_release ()
{
setup_make
if [ X`$MAKE is_cross_configured` = Xyes ]; then
TARGET=`$MAKE target_configured`
fi
$MAKE MAKE="$MAKE" BOOTSTRAP_ROOT=$BOOTSTRAP_ROOT TARGET=$TARGET \
RELEASE_ROOT=$1 OTP_STRICT_INSTALL=$OTP_STRICT_INSTALL \
release || exit 1
}
do_tests ()
{
setup_make
if [ X`$MAKE is_cross_configured` = Xyes ]; then
TARGET=`$MAKE target_configured`
fi
if [ X"$1" = X"" ]; then
$MAKE MAKE="$MAKE" TARGET=$TARGET release_tests || exit 1
else
$MAKE MAKE="$MAKE" TARGET=$TARGET TESTSUITE_ROOT=$1 release_tests || exit 1
fi
}
do_debuginfo_win32 ()
{
setup_make
(cd erts/emulator && $MAKE MAKE="$MAKE" TARGET=$TARGET FLAVOR=smp debug &&\
$MAKE MAKE="$MAKE" TARGET=$TARGET FLAVOR=plain debug) || exit 1
if [ -z "$1" ]; then
RELDIR=$ERL_TOP/release/$TARGET
else
RELDIR="$1"
fi
BINDIR=$ERL_TOP/bin/$TARGET
EVSN=`grep '^VSN' erts/vsn.mk | sed 's,^VSN.*=[^0-9]*\([0-9].*\)$,@\1,g;s,^[^@].*,,g;s,^@,,g'`
for f in beam.debug.dll beam.debug.smp.dll beam.pdb beam.smp.pdb erl.pdb werl.pdb erlexec.pdb; do
if [ -f $BINDIR/$f ]; then
rm -f $RELDIR/erts-$EVSN/bin/$f
cp $BINDIR/$f $RELDIR/erts-$EVSN/bin/$f
fi
done
}
do_installer_win32 ()
{
setup_make
installer_dir=$ERL_TOP/erts/etc/win32/nsis
(cd $installer_dir; $MAKE MAKE="$MAKE" TARGET=$TARGET TESTROOT=$1 release) || exit 1
}
do_copy_primary_bootstrap ()
{
if [ "x$1" = "x" ]; then
echo "Missing bootstrap source top" 1>&2
exit 1
fi
if [ ! -d $1 ]; then
echo "Invalid bootstrap source top" 1>&2
exit 1
fi
if [ "x$2" = "x" ]; then
echo "Missing bootstrap root" 1>&2
exit 1
fi
if [ ! -d $2 ]; then
echo "Invalid bootstrap root" 1>&2
exit 1
fi
bootstrap=$2/bootstrap
bootstrap_src_top=$1
lib_src=$bootstrap_src_top/lib
# kernel
test -d $bootstrap/lib/kernel/ebin || mkdir -p $bootstrap/lib/kernel/ebin
test -d $bootstrap/lib/kernel/include || mkdir -p $bootstrap/lib/kernel/include
cp -f $lib_src/kernel/ebin/*.beam $bootstrap/lib/kernel/ebin
cp -f $lib_src/kernel/include/*.hrl $bootstrap/lib/kernel/include
# stdlib
test -d $bootstrap/lib/stdlib/ebin || mkdir -p $bootstrap/lib/stdlib/ebin
test -d $bootstrap/lib/stdlib/include || mkdir -p $bootstrap/lib/stdlib/include
cp -f $lib_src/stdlib/ebin/*.beam $bootstrap/lib/stdlib/ebin
cp -f $lib_src/stdlib/include/*.hrl $bootstrap/lib/stdlib/include
# compiler
test -d $bootstrap/lib/compiler/ebin || mkdir -p $bootstrap/lib/compiler/ebin
cp -f $lib_src/compiler/ebin/*.beam $bootstrap/lib/compiler/ebin
# orber include
test -d $bootstrap/lib/orber/include || mkdir -p $bootstrap/lib/orber/include
cp -f $lib_src/orber/include/* $bootstrap/lib/orber/include
# bootstrap bin
if [ $bootstrap_src_top != $ERL_TOP ]; then
test -d $bootstrap/bin || mkdir -p $bootstrap/bin
cp -f $bootstrap_src_top/bin/* $bootstrap/bin
fi
}
do_save_bootstrap ()
{
if [ ! -f $ERL_TOP/prebuilt.files ]; then
echo "This is not a pre-built source distribution" 1>&2
exit 1
fi
if [ -d $ERL_TOP/bootstrap/lib ]; then
echo "Bootstrap already exist" 1>&2
exit 1
fi
do_copy_primary_bootstrap $ERL_TOP $ERL_TOP
}
do_remove_prebuilt_files ()
{
do_save_bootstrap
for file in $ERL_TOP/`cat $ERL_TOP/prebuilt.files` ; do
rm -f $file
done
}
# main
check_erltop
cd $ERL_TOP
determine_version_controller
# Unset ERL_FLAGS and ERL_<Release>_FLAGS to prevent, for instance,
# a value of "-hybrid" to run the hybrid emulator during bootstrap.
sys_vsn=`awk '/SYSTEM_VSN = / {print $3}' < erts/vsn.mk`
sys_erl_flags="ERL_${sys_vsn}_FLAGS"
unset ERL_FLAGS
unset ${sys_erl_flags}
# Target first guess, won't necessarily hold, may be changed for
# certain parameters.
if [ X"$TARGET" = X"" ]; then
TARGET=`$ERL_TOP/erts/autoconf/config.guess`
fi
BUILDSYS=$TARGET
case $TARGET in
*-cygwin)
if [ X"$BUILD_FOR_CYGWIN" = X"" ]; then
if [ X"$OVERRIDE_TARGET" = X"" -a X"$1" != X"env_win32" -a X"$1" != X"env_mingw32" ];then
echo "Building for windows, you should do the " \
"following first:" >&2
echo 'eval `./otp_build env_win32`' >&2
echo 'please note that there are backticks (``) in' \
'the command'
exit 1
fi
fi;;
*)
;;
esac
if [ ! -z "$OVERRIDE_TARGET" ]; then
TARGET="$OVERRIDE_TARGET"
fi
# Setting a bootstrap root is inherently very dangerous now that the bootstrap
# is prebuilt, avoid it if not forced by setting FORCE_BOOTSTRAP_ROOT=true!
if [ X"$FORCE_BOOTSTRAP_ROOT" != X"true" ]; then
BOOTSTRAP_ROOT="$ERL_TOP"
else
if [ -z "$BOOTSTRAP_ROOT" ]; then
BOOTSTRAP_ROOT="$ERL_TOP"
fi
fi
if [ X"$1" = X"" ]; then
usage
exit 1
fi
if [ X"$2" = X"-a" ]; then
minus_a_flag=true
OTP_SMALL_BUILD=
else
OTP_SMALL_BUILD=true
minus_a_flag=false
fi
export OTP_SMALL_BUILD
TYPE=
case "$1" in
all)
do_autoconf;
do_configure;
do_boot;
if [ $minus_a_flag = true ]; then
shift
fi;
do_release "$2";;
setup)
shift;
if [ $minus_a_flag = true ]; then
shift
fi;
do_autoconf;
do_configure "$@";
do_boot;;
lazy_setup)
shift;
if [ $minus_a_flag = true ]; then
shift
fi;
do_lazy_configure "$@";
do_boot;;
autoconf)
do_autoconf;;
configure)
shift;
do_configure "$@";;
lazy_configure)
shift;
do_lazy_configure "$@";;
lazy_configure_clean)
shift;
do_lazy_configure_clean;;
lazy_configure_target_clean)
shift;
do_lazy_configure_target_clean;;
opt)
do_boot;;
plain|smp|hybrid)
if [ $minus_a_flag = false ]; then
TYPE=opt
fi;
FLAVOR=$1
if [ $FLAVOR = opt ]; then
FLAVOR=plain
fi
do_boot;;
update_primary)
case $version_controller in
git) do_primary_git ;;
none) git_required ;;
esac ;;
update_preloaded)
case $version_controller in
git) do_update_prel_git ;;
none) git_required ;;
esac ;;
primary)
echo "Primary bootstrap is under version control since R13";
echo "Use update_primary if you really are";
echo "updating the primary bootstrap...";;
boot)
do_boot;;
emulator)
do_boot_emu;;
release)
if [ $minus_a_flag = true ]; then
shift
fi;
do_release "$2";;
tests)
if [ $minus_a_flag = true ]; then
shift
fi;
do_tests "$2";;
remove_prebuilt_files)
do_remove_prebuilt_files;;
save_bootstrap)
do_save_bootstrap;;
copy_primary_bootstrap)
do_copy_primary_bootstrap $2 $3;;
installer_win32)
if [ $minus_a_flag = true ]; then
shift
fi;
do_installer_win32 "$2";;
debuginfo_win32)
if [ $minus_a_flag = true ]; then
shift
fi;
do_debuginfo_win32 "$2";;
env_win32)
echo_env_win32;;
env_mingw32)
echo_env_mingw32;;
env_vxworks)
echo_env_vxworks "$2";;
env_cross)
echo_env_cross "$2";;
env_bootstrap)
echo_env_bootstrap;;
*)
usage;;
esac
Jump to Line
Something went wrong with that request. Please try again.