diff --git a/otp_build b/otp_build index 165f9dc66d41..ad9d38ebca5e 100755 --- a/otp_build +++ b/otp_build @@ -40,7 +40,7 @@ bootstrap_apps="erts lib/asn1 lib/compiler lib/hipe lib/ic lib/kernel lib/parset # We will quote a bit more than needed, but the important thing is that # all that needs quoting will be quoted... -DONT_QUOTE="A-Za-z0-9/=_+-" +DONT_QUOTE="A-Za-z0-9~/=_+-" # Utility functions usage () @@ -433,7 +433,11 @@ try_cross_configure () --build=*) build_value=`echo $x | sed "s|^--build=\(.*\)|\1|"`;; --xcomp-conf=*) - xcomp_conf=`echo "X$arg" | sed "s|^X--xcomp-conf=\(.*\)\$|\1|g"` + # tilde expansion is not handled by the `configure' script, + # but we do it for this argument. This argument is however not + # a `configure' argument. + xcomp_conf=`echo "X$arg" | sed "s|^X--xcomp-conf=\(.*\)\$|\1|g;s|\([^$DONT_QUOTE]\)|\\\\\\\\\1|g"` + eval "xcomp_conf=$xcomp_conf" test "X$xcomp_conf" != "X" || { echo "$0: Missing xcomp-conf file name" exit 1 @@ -444,7 +448,7 @@ try_cross_configure () } . "$xcomp_conf" test $? -eq 0 || { - echo "$0: Failed to read xcomp-conf file: $conf" + echo "$0: Failed to read xcomp-conf file: $xcomp_conf" exit 1 } test "X$erl_xcomp_build" = "X" || build_value="$erl_xcomp_build" diff --git a/xcomp/README b/xcomp/README deleted file mode 100644 index f4285cd16f82..000000000000 --- a/xcomp/README +++ /dev/null @@ -1,449 +0,0 @@ -=============================================================================== - Cross Compiling Erlang/OTP -=============================================================================== - -%CopyrightBegin% - -Copyright Ericsson AB 2009-2010. All Rights Reserved. - -The contents of this file are subject to the Erlang Public License, -Version 1.1, (the "License"); you may not use this file except in -compliance with the License. You should have received a copy of the -Erlang Public License along with this software. If not, it can be -retrieved online at http://www.erlang.org/. - -Software distributed under the License is distributed on an "AS IS" -basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -the License for the specific language governing rights and limitations -under the License. - -%CopyrightEnd% - -=============================================================================== - -This document describes how to cross compile Erlang/OTP. Note that the support -for cross compiling Erlang/OTP is in its early stage of development, and -should be considered as experimental. You are encouraged to read the whole -document before attempting to cross compile Erlang/OTP. - -Building Erlang/OTP can be done either by using the `$ERL_TOP/otp_build' -script, or by invoking `configure' and `make' directly. The -`erl-xcomp.conf.template' file contains all available configuration variables -and can be used as a template when creating a configuration. See -`erl-xcomp-TileraMDE2.0-tilepro.conf` and `erl-xcomp-x86_64-saf-linux-gnu.conf' -for examples of working configurations. - -The configuration files can be passed to `$ERL_TOP/otp_build configure' using -the `--xcomp-conf' command line argument. Note that `configure' doesn't accept -this command line argument. When using the `configure' script directly, pass -the configuration variables as arguments to `configure' (or exported in the -environment). If the default behavior of a variable is satisfactory, the -variable doesn't need to be set. However, the `configure' script will issue a -warning when a default value is used. When a variable has been set, no warning -will be issued. - -All Erlang/OTP applications except the `wx' application can be cross compiled. -The build of the `wx' driver will currently be automatically disabled when -cross compiling. - -Note, that `$ERL_TOP/otp_build configure' will produce a default configuration -that differs from what `$ERL_TOP/configure' will produce by default. For -example, currently `--disable-dynamic-ssl-lib' is added to the -`$ERL_TOP/configure' command line arguments unless `--enable-dynamic-ssl-lib' -has been explicitly passed. The defaults used by `$ERL_TOP/otp_build configure' -may change at any time without prior notice. - -The build system, including cross compilation configuration variables used, -may be subject to non backward compatible changes without prior notice. -Current cross build system has been tested when cross compiling some Linux/GNU -systems, but has only been partly tested for more esoteric platforms. The -VxWorks example file is highly dependent on our environment and is here more -or less only for internal use. - -Please submit any patches for cross compiling in a way consistent with this -system. All input is welcome as we have a very limited set of cross compiling -environments to test with. If a new configuration variable is needed, add it -to `$ERL_TOP/xcomp/erl-xcomp.conf.template', and use it in `configure.in'. -Other files that might need to be updated are: -- `$ERL_TOP/xcomp/erl-xcomp-vars.sh' -- `$ERL_TOP/erl-build-tool-vars.sh' -- `$ERL_TOP/erts/aclocal.m4' -- `$ERL_TOP/xcomp/README' -- `$ERL_TOP/xcomp/erl-xcomp-*.conf' -Note that this might be an incomplete list of files that need to be updated. - -General information on how to submit patches can be found at: - http://wiki.github.com/erlang/otp/submitting-patches - -======= Build and Install ===================================================== - - [1] - -Change directory into the top directory of the Erlang/OTP source tree. - - $ cd $ERL_TOP - -------- Build ----------------------------------------------------------------- - -In order to compile Erlang code, a small Erlang bootstrap system has to be -built, or an Erlang/OTP system of the same release as the one being built -has to be provided in the `$PATH'. The Erlang/OTP for the target system will -be built using this Erlang system, together with the cross compilation tools -provided. - -If you want to build using a compatible Erlang/OTP system in the `$PATH', -jump to [3]. - --- Building a bootstrap system -- - - [2] - - $ ./configure --enable-bootstrap-only - $ make - -The `--enable-bootstrap-only' argument to `configure' isn't strictly necessary, -but will speed things up. It will only run `configure' in applications -necessary for the bootstrap, and will disable a lot of things not needed by -the bootstrap system. If you run `configure' without `--enable-boostrap-only' -you also have to run make as `make bootstrap'; otherwise, the whole system will -be built. - --- Cross building the system -- - - [3] - - $ ./configure --build= --host= [Other Configure Args] - $ make - - should equal the CPU-VENDOR-OS triplet of the system that you build -on. If you execute `$ERL_TOP/erts/autoconf/config.guess', it will in most -cases print the triplet you want to use for this. - - is the system that you build for. It does not have to be a full -CPU-VENDOR-OS triplet, but can be. The full CPU-VENDOR-OS triplet will be -created by executing `$ERL_TOP/erts/autoconf/config.sub '. If -`config.sub' fails, you need to be more specific. - -Pass the cross compilation variables as command line arguments to `configure' -using a `=' syntax (or export them in the environment). Note that -you can *not* pass a configuration file using `--xcomp-conf=' when you -invoke `configure' directly. The `--xcomp-conf=' argument can only -be passed to `$ERL_TOP/otp_build configure'. - -`make' will verify that the Erlang/OTP system used when building is of the -same release as the system being built, and will fail if this is not the case. -It is possible, however not recommended, to force the cross compilation even -though the wrong Erlang/OTP system is used. This by invoking `make' like this: -`make ERL_XCOMP_FORCE_DIFFERENT_OTP=yes'. Note that this build might fail, -silently produce suboptimal code, or silently produce erroneous code. - --- Installing -- - -You can either install using the installation paths determined by `configure' -[4], or install manually using [5]. - - [4] - - $ make install DESTDIR= - -`make install' will install at a location specified when doing `configure'. -`configure' arguments specifying where the installation should reside are for -example: `--prefix', `--exec-prefix', `--libdir', `--bindir', etc. By default -it will install under `/usr/local'. You typically do not want to install your -cross build under `/usr/local' on your build machine. Using `DESTDIR' will -cause the installation paths to be prefixed by `$DESTDIR'. This makes it -possible to install and package the installation on the build machine without -having to place the installation in the same directory on the build machine as -it should be executed from on the target machine. - -When `make install' has finished, change directory into `$DESTDIR', package -the system, move it to the target machine, and unpack it. Note that the -installation will only be working on the target machine at the location -determined by `configure'. - -Installing manually: - - [5] - - $ make release RELEASE_ROOT= - -`make release' will copy what you have built for the target machine to -`'. The `Install' script will not be run. The content of -`' is what by default ends up in `/usr/local/lib/erlang'. - -The `Install' script used when installing Erlang/OTP requires common Unix -tools such as `sed' to be present in your `$PATH'. If your target system -does not have such tools, you need to run the `Install' script on your -build machine before packaging Erlang/OTP. The `Install' script should -currently be invoked as follows in the directory where it resides -(the top directory): - `./Install [-cross] [-minimal|-sasl] ' - where: - -minimal - Creates an installation that starts up a minimal amount - of applications, i.e., only `kernel' and `stdlib' are - started. The minimal system is normally enough. - -sasl - Creates an installation that also starts up the `sasl' - application. - -cross - For cross compilation. Informs the install script that it - is run on the build machine. - - The absolute path to the Erlang installation to use at run - time. This is often the same as the current working - directory, but does not have to be. It can follow any other - path through the file system to the same directory. -If neither `-minimal', nor `-sasl' is passed as argument you will be -prompted. - -You can now either: - - [6] - -* Decide where the installation should be located on the target machine, run - the `Install' script on the build machine, and package the installed - installation. The installation just need to be unpacked at the right - location on the target machine: - - $ cd - $ ./Install -cross [-minimal|-sasl] - - [7] - -* Package the installation in , place it wherever you want on - your target machine, and run the `Install' script on your target machine: - - $ cd - $ ./Install [-minimal|-sasl] - --- Building with the `otp_build' script -- - - [8] - - $ cd $ERL_TOP - - [9] - - $ ./otp_build configure [--build=] [--host=] \ - [--with-xcomp-conf=] [Other Configure Args] - -If you have your cross compilation configuration in a file, pass it using the -`--xcomp-conf=' command line argument. If not, pass the configuration -variables on the command line using a `=' syntax (or in the -environment). - -`--build=', and `--host=' are the same as described at [3]. -The `--xcomp-conf=' argument causes `otp_build' to read the cross -compilation configuration from `'. All of these arguments are in this -case optional, but `', and `' must be given either by passing -`--build=' and `--host=' on the command line, or by setting -`erl_xcomp_build=', and `erl_xcomp_host=' in `' and -passing the `--xcomp-conf=' argument. - -`otp_build configure' will configure both for the boostrap system on the -build machine and the cross host system. - - [10] - - $ ./otp_build boot -a - -`otp_build boot -a' will first build a bootstrap system for the build machine -and then do the cross build of the system. - - [11] - - $ ./otp_build release -a - -`otp_build release -a' will do the same as [5], and you will after this have -to do a manual install either by doing [6], or [7]. - -======== Currently used configuration variables =============================== - -Note that you cannot define arbitrary variables in a cross compilation -configuration file. Only the ones listed below will be guaranteed to be -visible throughout the whole execution of all `configure' scripts. Other -variables needs to be defined as arguments to `configure' or exported in -the environment. - --------- `otp_build' only variables ------------------------------------------- - -Variables in this section are only used, when configuring Erlang/OTP for -cross compilation using `$ERL_TOP/otp_build configure'. - -NOTE! These variables currently have *no* effect if you configure using the -`configure' script directly. - -* erl_xcomp_build - Build system. - This value will be passed as `--build=$erl_xcomp_build' argument to the - `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, - but can be. The full CPU-VENDOR-OS triplet will be created by: - `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build' - If `erl_xcomp_build=guess', the build system will be guessed using: - `$ERL_TOP/erts/autoconf/config.guess'. - -* erl_xcomp_host - Cross host system. - This value will be passed as `--host=$erl_xcomp_host' argument to the - `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, - but can be. The full CPU-VENDOR-OS triplet will be created by: - `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host' - -* erl_xcomp_configure_flags - Extra configure flags. - Extra flags to pass to the `configure' script. - --------- Cross compiler and other tools to use -------------------------------- - -If the cross compilation tools are prefixed by `-' you probably do -not need to set these variables (where `' is what has been passed as -`--host=' argument to `configure'). - -* CC - C compiler. - -* CFLAGS - C compiler flags. - -* STATIC_CFLAGS - Static C compiler flags. - -* CFLAG_RUNTIME_LIBRARY_PATH - C compiler runtime library path flag. - This flag should set a specific runtime library path for the shared - library at link time. Note that this is actually a linker flag, but it - needs to be passed via the compiler. - -* CPP - C pre-processor. - -* CPPFLAGS - C pre-processor flags. - -* CXX - C++ compiler. - -* CXXFLAGS - C++ compiler flags. - -* LD - Linker. - -* LDFLAGS - Linker flags. - -* LIBS - Libraries. - --- Dynamic Erlang Driver linker flags -- - -NOTE! Either set all or non of the DED_LD* variables. - -* DED_LD - Linker. - -* DED_LDFLAGS - Linker flags. - -* DED_LD_FLAG_RUNTIME_LIBRARY_PATH - Linker runtime library path flag. - This flag should set a specific runtime library path for the shared - library at link time. - --- Large file support -- - -NOTE! Either set all or non of the LFS_* variables. - -* LFS_CFLAGS - Large file support C compiler flags. - -* LFS_LDFLAGS - Large file support linker flags. - -* LFS_LIBS - Large file support libraries. - --- Other tools -- - -* RANLIB - `ranlib' archive index tool. - -* AR - `ar' archiving tool. - -* GETCONF - `getconf' system configuration inspection tool. - --------- Cross System Root Locations ------------------------------------------ - -* erl_xcomp_sysroot - Absolute cross system root path. - The absolute path to the system root of the cross compilation - environment. Currently, the `crypto', `odbc', `ssh' and `ssl' - applications need the system root. These applications will be skipped - if the system root has not been set. The system root might be needed - for other things too. If this is the case and the system root has not - been set, `configure' will fail and request you to set it. - -* erl_xcomp_isysroot - Absolute cross include system root path. - The absolute path to the system root for includes of the cross - compilation environment. If not set, this value defaults to - `$erl_xcomp_sysroot', i.e., only set this value if the include system - root path is not the same as the system root path. - --------- Optional feature, or bug tests --------------------------------------- - -These tests cannot (always) be done automatically when cross compiling. You -usually does not need to set these variables. Only set these if you really -know what you are doing. - -Note that some of these values will override results of tests performed -by `configure', and some will not be used until `configure' is sure that -it cannot figure the result out. - -The `configure' script will issue a warning when a default value is used. -When a variable has been set, no warning will be issued. - -* erl_xcomp_bigendian - yes|no - If `yes', the target system must be big endian. If `no', little endian. - This can often be automatically detected, but not always. If not - automatically detected, `configure' will fail unless this variable is - set. No default value is used, i.e., `configure' will try to figure - this out automatically. - -* erl_xcomp_linux_clock_gettime_correction - yes|no (defaults to `yes' on - Linux; otherwise, `no') - If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on the target system must - work. This variable is recommended to be set to `no' on Linux systems - with kernel versions less than 2.6. - -* erl_xcomp_linux_nptl - yes|no (defaults to `yes' on Linux; otherwise, `no') - If `yes', the target system must have NPTL (Native POSIX Thread Library). - Older Linux systems have LinuxThreads instead of NPTL (Linux kernel - versions typically less than 2.6). - -* erl_xcomp_linux_usable_sigusrx - yes|no (defaults to `yes') - If `yes', the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. - Old LinuxThreads thread libraries (Linux kernel versions less than 2.2) - used these signals and made them unusable by the ERTS. - -* erl_xcomp_linux_usable_sigaltstack - yes|no (defaults to `yes' on Linux; - otherwise, `no') - If `yes', `sigaltstack()' must be usable on the target system. - `sigaltstack()' on Linux kernel versions less than 2.4 are broken. - -* erl_xcomp_poll - yes|no (defaults to `no' on Darwin/MacOSX; otherwise, `yes') - If `yes', the target system must have a working `poll()' implementation - that also can handle devices. If `no', `select()' will be used instead of - `poll()'. - -* erl_xcomp_kqueue - yes|no (defaults to `no') - If `yes', the target system must have a working `kqueue()' implementation - that returns a file descriptor which can be used by `poll()' and/or - `select()'. If `no' and the target system has not got `epoll()' or - `/dev/poll', the kernel-poll feature will be disabled. - -* erl_xcomp_putenv_copy - yes|no (defaults to `no') - If `yes', the target system must have a `putenv()' implementation that - stores a copy of the key/value pair. - -* erl_xcomp_reliable_fpe - yes|no (defaults to `no') - If `yes', the target system must have reliable floating point exceptions. - -* erl_xcomp_getaddrinfo - yes|no (defaults to `no') - If `yes', the target system must have a working `getaddrinfo()' - implementation that can handle both IPv4 and IPv6. - -* erl_xcomp_gethrvtime_procfs_ioctl - yes|no (defaults to `no') - If `yes', the target system must have a working `gethrvtime()' - implementation and is used with procfs `ioctl()'. - -* erl_xcomp_clock_gettime_cpu_time - yes|no (defaults to `no') - If `yes', the target system must have a working `clock_gettime()' - implementation that can be used for retrieving process CPU time. - -* erl_xcomp_after_morecore_hook - yes|no (defaults to `no') - If `yes', the target system must have a working `__after_morecore_hook' - that can be used for tracking used `malloc()' implementations core memory - usage. - -* erl_xcomp_dlsym_brk_wrappers - yes|no (defaults to `no') - If `yes', the target system must have a working `dlsym(RTLD_NEXT, )' - implementation that can be used on `brk' and `sbrk' symbols used by the - `malloc()' implementation in use, and by this track the `malloc()' - implementations core memory usage. - -=============================================================================== diff --git a/xcomp/README.md b/xcomp/README.md new file mode 100644 index 000000000000..e97b26e605bf --- /dev/null +++ b/xcomp/README.md @@ -0,0 +1,485 @@ +Cross Compiling Erlang/OTP +========================== + +This document describes how to cross compile Erlang/OTP. Note that the support +for cross compiling Erlang/OTP is in its early stage of development, and +should be considered as experimental. You are encouraged to read the whole +document before attempting to cross compile Erlang/OTP. + +Building Erlang/OTP can be done either by using the `$ERL_TOP/otp_build` +script, or by invoking `$ERL_TOP/configure` and `make` directly (where +`$ERL_TOP` is the top directory in the source tree). Building using `otp_build` +is easier since it involves fewer steps, but the `otp_build` build procedure +is not as flexible as the `configure`/`make` build procedure. The binary +releases that we deliver are built using `otp_build`. Also note that +`otp_build configure` will produce a default configuration that differs from +what `configure` will produce by default. For example, currently +`--disable-dynamic-ssl-lib` is added to the `configure` command line arguments +unless `--enable-dynamic-ssl-lib` has been explicitly passed. The defaults +used by `otp_build configure` may change at any time without prior notice. + +The `$ERL_TOP/xcomp/erl-xcomp.conf.template` file contains all available cross +configuration variables and can be used as a template when creating a cross +compilation configuration. For examples of working cross configurations see +the `$ERL_TOP/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf` file and the +`$ERL_TOP/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf` file. If the default +behavior of a variable is satisfactory, the variable does not need to be set. +However, the `configure` script will issue a warning when a default value is +used. When a variable has been set, no warning will be issued. + +A cross configuration file can be passed to `otp_build configure` using the +`--xcomp-conf` command line argument. Note that `configure` does not accept +this command line argument. When using the `configure` script directly, pass +the configuration variables as arguments to `configure` using a +`=` syntax. Variables can also be passed as environment +variables to `configure`. However, if you pass the configuration in the +environment, make sure to unset all of these environment variables before +invoking `make`; otherwise, the environment variables might set make variables +in some applications, or parts of some applications, and you may end up with +an erroneously configured build. + +All Erlang/OTP applications except the `wx` application can be cross compiled. +The build of the `wx` driver will currently be automatically disabled when +cross compiling. + +The build system, including cross compilation configuration variables used, +may be subject to non backward compatible changes without prior notice. +Current cross build system has been tested when cross compiling some Linux/GNU +systems, but has only been partly tested for more esoteric platforms. The +VxWorks example file is highly dependent on our environment and is here more +or less only for internal use. + +Please submit any patches for cross compiling in a way consistent with this +system. All input is welcome as we have a very limited set of cross compiling +environments to test with. If a new configuration variable is needed, add it +to `$ERL_TOP/xcomp/erl-xcomp.conf.template`, and use it in `configure.in`. +Other files that might need to be updated are: + +- `$ERL_TOP/xcomp/erl-xcomp-vars.sh` +- `$ERL_TOP/erl-build-tool-vars.sh` +- `$ERL_TOP/erts/aclocal.m4` +- `$ERL_TOP/xcomp/README` +- `$ERL_TOP/xcomp/erl-xcomp-*.conf` + +Note that this might be an incomplete list of files that need to be updated. + +General information on how to submit patches can be found at: + + +If you are building in a `git` working directory, the `configure` scripts need +to be generated before you can start building. This is done by invoking +`./otp_build autoconf` in the `$ERL_TOP` directory. The `configure` scripts +also have to be regenerated when a `configure.in` or `aclocal.m4` file is +modified. Note that this is *not* needed when building an unmodified version +of the released source. + +Build and Install +----------------- + + [1] + +Change directory into the top directory of the Erlang/OTP source tree. + + $ cd $ERL_TOP + +### Build ### + +In order to compile Erlang code, a small Erlang bootstrap system has to be +built, or an Erlang/OTP system of the same release as the one being built +has to be provided in the `$PATH`. The Erlang/OTP for the target system will +be built using this Erlang system, together with the cross compilation tools +provided. + +If you want to build using a compatible Erlang/OTP system in the `$PATH`, +jump to [3]. + +#### Building a Bootstrap System #### + + [2] + + $ ./configure --enable-bootstrap-only + $ make + +The `--enable-bootstrap-only` argument to `configure` isn't strictly necessary, +but will speed things up. It will only run `configure` in applications +necessary for the bootstrap, and will disable a lot of things not needed by +the bootstrap system. If you run `configure` without `--enable-boostrap-only` +you also have to run make as `make bootstrap`; otherwise, the whole system will +be built. + +#### Cross Building the System #### + + [3] + + $ ./configure --host= --build= [Other Config Args] + $ make + +`` is the host/target system that you build for. It does not have to be +a full `CPU-VENDOR-OS` triplet, but can be. The full `CPU-VENDOR-OS` triplet +will be created by executing `$ERL_TOP/erts/autoconf/config.sub `. If +`config.sub` fails, you need to be more specific. + +`` should equal the `CPU-VENDOR-OS` triplet of the system that you +build on. If you execute `$ERL_TOP/erts/autoconf/config.guess`, it will in +most cases print the triplet you want to use for this. + +Pass the cross compilation variables as command line arguments to `configure` +using a `=` syntax. Note that you can *not* pass a +configuration file using `--xcomp-conf=` when you invoke `configure` +directly. The `--xcomp-conf=` argument can only be passed to +`otp_build configure`. + +`make` will verify that the Erlang/OTP system used when building is of the +same release as the system being built, and will fail if this is not the case. +It is possible, however not recommended, to force the cross compilation even +though the wrong Erlang/OTP system is used. This by invoking `make` like this: +`make ERL_XCOMP_FORCE_DIFFERENT_OTP=yes`. Note that this build might fail, +silently produce suboptimal code, or silently produce erroneous code. + +#### Installing #### + +You can either install using the installation paths determined by `configure` +[4], or install manually using [5]. + + [4] + + $ make install DESTDIR= + +`make install` will install at a location specified when doing `configure`. +`configure` arguments specifying where the installation should reside are for +example: `--prefix`, `--exec-prefix`, `--libdir`, `--bindir`, etc. By default +it will install under `/usr/local`. You typically do not want to install your +cross build under `/usr/local` on your build machine. Using `DESTDIR` will +cause the installation paths to be prefixed by `$DESTDIR`. This makes it +possible to install and package the installation on the build machine without +having to place the installation in the same directory on the build machine as +it should be executed from on the target machine. + +When `make install` has finished, change directory into `$DESTDIR`, package +the system, move it to the target machine, and unpack it. Note that the +installation will only be working on the target machine at the location +determined by `configure`. + +Installing manually: + + [5] + + $ make release RELEASE_ROOT= + +`make release` will copy what you have built for the target machine to +``. The `Install` script will not be run. The content of +`` is what by default ends up in `/usr/local/lib/erlang`. + +The `Install` script used when installing Erlang/OTP requires common Unix +tools such as `sed` to be present in your `$PATH`. If your target system +does not have such tools, you need to run the `Install` script on your +build machine before packaging Erlang/OTP. The `Install` script should +currently be invoked as follows in the directory where it resides +(the top directory): + + $ ./Install [-cross] [-minimal|-sasl] + +where: + + * `-minimal` - Creates an installation that starts up a minimal + amount of applications, i.e., only `kernel` and + `stdlib` are started. The minimal system is normally + enough, and is what `make install` uses. + * `-sasl` - Creates an installation that also starts up the + `sasl` application. + * `-cross` - For cross compilation. Informs the install script + that it is run on the build machine. + * `` - The absolute path to the Erlang installation to use + at run time. This is often the same as the current + working directory, but does not have to be. It can + follow any other path through the file system to the + same directory. + +If neither `-minimal`, nor `-sasl` is passed as argument you will be +prompted. + +You can now either do [6] or [7]: + + [6] + +Decide where the installation should be located on the target machine, run +the `Install` script on the build machine, and package the installed +installation. The installation just need to be unpacked at the right location +on the target machine: + + $ cd + $ ./Install -cross [-minimal|-sasl] + + [7] + +Package the installation in , place it wherever you want on your +target machine, and run the `Install` script on your target machine: + + $ cd + $ ./Install [-minimal|-sasl] + +#### Building With the `otp_build` Script #### + + [8] + + $ cd $ERL_TOP + + [9] + + $ ./otp_build configure --xcomp-conf= [Other Config Args] + +alternatively: + + $ ./otp_build configure --host= --build= [Other Config Args] + +If you have your cross compilation configuration in a file, pass it using the +`--xcomp-conf=` command line argument. If not, pass `--host=`, +`--build=`, and the configuration variables using a `=` +syntax on the command line (same as in [3]). Note that `` and `` +have to be passed one way or the other; either by using `erl_xcomp_host=` +and `erl_xcomp_build=` in the configuration file, or by using the +`--host=`, and `--build=` command line arguments. + +`otp_build configure` will configure both for the boostrap system on the +build machine and the cross host system. + + [10] + + $ ./otp_build boot -a + +`otp_build boot -a` will first build a bootstrap system for the build machine +and then do the cross build of the system. + + [11] + + $ ./otp_build release -a + +`otp_build release -a` will do the same as [5], and you will after this have +to do a manual install either by doing [6], or [7]. + +Currently Used Configuration Variables +-------------------------------------- + +Note that you cannot define arbitrary variables in a cross compilation +configuration file. Only the ones listed below will be guaranteed to be +visible throughout the whole execution of all `configure` scripts. Other +variables needs to be defined as arguments to `configure` or exported in +the environment. + +### Variables for `otp_build` Only ### + +Variables in this section are only used, when configuring Erlang/OTP for +cross compilation using `$ERL_TOP/otp_build configure`. + +*NOTE*! These variables currently have *no* effect if you configure using +the `configure` script directly. + +* `erl_xcomp_build` - The build system used. This value will be passed as + `--build=$erl_xcomp_build` argument to the `configure` script. It does + not have to be a full `CPU-VENDOR-OS` triplet, but can be. The full + `CPU-VENDOR-OS` triplet will be created by + `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build`. + If set to `guess`, the build system will be guessed using + `$ERL_TOP/erts/autoconf/config.guess`. + +* `erl_xcomp_host` - Cross host/target system to build for. This value will + be passed as `--host=$erl_xcomp_host` argument to the `configure` script. + It does not have to be a full `CPU-VENDOR-OS` triplet, but can be. The + full `CPU-VENDOR-OS` triplet will be created by: + `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host` + +* `erl_xcomp_configure_flags` - Extra configure flags to pass to the + `configure` script. + +### Cross Compiler and Other Tools ### + +If the cross compilation tools are prefixed by `-` you probably do +not need to set these variables (where `` is what has been passed as +`--host=` argument to `configure`). + +All variables in this section can also be used when native compiling. + +* `CC` - C compiler. + +* `CFLAGS` - C compiler flags. + +* `STATIC_CFLAGS` - Static C compiler flags. + +* `CFLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library + search path for the shared libraries. Note that this actually is a + linker flag, but it needs to be passed via the compiler. + +* `CPP` - C pre-processor. + +* `CPPFLAGS` - C pre-processor flags. + +* `CXX` - C++ compiler. + +* `CXXFLAGS` - C++ compiler flags. + +* `LD` - Linker. + +* `LDFLAGS` - Linker flags. + +* `LIBS` - Libraries. + +#### *D*ynamic *E*rlang *D*river Linking #### + +*NOTE*! Either set all or none of the `DED_LD*` variables. + +* `DED_LD` - Linker for Dynamically loaded Erlang Drivers. + +* `DED_LDFLAGS` - Linker flags to use with `DED_LD`. + +* `DED_LD_FLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library + search path for shared libraries when linking with `DED_LD`. + +#### Large File Support #### + +*NOTE*! Either set all or none of the `LFS_*` variables. + +* `LFS_CFLAGS` - Large file support C compiler flags. + +* `LFS_LDFLAGS` - Large file support linker flags. + +* `LFS_LIBS` - Large file support libraries. + +#### Other Tools #### + +* `RANLIB` - `ranlib` archive index tool. + +* `AR` - `ar` archiving tool. + +* `GETCONF` - `getconf` system configuration inspection tool. `getconf` is + currently used for finding out large file support flags to use, and + on Linux systems for finding out if we have an NPTL thread library or + not. + +### Cross System Root Locations ### + +* `erl_xcomp_sysroot` - The absolute path to the system root of the cross + compilation environment. Currently, the `crypto`, `odbc`, `ssh` and + `ssl` applications need the system root. These applications will be + skipped if the system root has not been set. The system root might be + needed for other things too. If this is the case and the system root + has not been set, `configure` will fail and request you to set it. + +* `erl_xcomp_isysroot` - The absolute path to the system root for includes + of the cross compilation environment. If not set, this value defaults + to `$erl_xcomp_sysroot`, i.e., only set this value if the include system + root path is not the same as the system root path. + +### Optional Feature, and Bug Tests ### + +These tests cannot (always) be done automatically when cross compiling. You +usually do not need to set these variables. Only set these if you really +know what you are doing. + +Note that some of these values will override results of tests performed +by `configure`, and some will not be used until `configure` is sure that +it cannot figure the result out. + +The `configure` script will issue a warning when a default value is used. +When a variable has been set, no warning will be issued. + +* `erl_xcomp_after_morecore_hook` - `yes|no`. Defaults to `no`. If `yes`, the + target system must have a working `__after_morecore_hook` that can be + used for tracking used `malloc()` implementations core memory usage. + This is currently only used by unsupported features. + +* `erl_xcomp_bigendian` - `yes|no`. No default. If `yes`, the target system + must be big endian. If `no`, little endian. This can often be + automatically detected, but not always. If not automatically detected, + `configure` will fail unless this variable is set. Since no default + value is used, `configure` will try to figure this out automatically. + +* `erl_xcomp_clock_gettime_cpu_time` - `yes|no`. Defaults to `no`. If `yes`, + the target system must have a working `clock_gettime()` implementation + that can be used for retrieving process CPU time. + +* `erl_xcomp_getaddrinfo` - `yes|no`. Defaults to `no`. If `yes`, the target + system must have a working `getaddrinfo()` implementation that can + handle both IPv4 and IPv6. + +* `erl_xcomp_gethrvtime_procfs_ioctl` - `yes|no`. Defaults to `no`. If `yes`, + the target system must have a working `gethrvtime()` implementation and + is used with procfs `ioctl()`. + +* `erl_xcomp_dlsym_brk_wrappers` - `yes|no`. Defaults to `no`. If `yes`, the + target system must have a working `dlsym(RTLD_NEXT, )` implementation + that can be used on `brk` and `sbrk` symbols used by the `malloc()` + implementation in use, and by this track the `malloc()` implementations + core memory usage. This is currently only used by unsupported features. + +* `erl_xcomp_kqueue` - `yes|no`. Defaults to `no`. If `yes`, the target system + must have a working `kqueue()` implementation that returns a file + descriptor which can be used by `poll()` and/or `select()`. If `no` and + the target system has not got `epoll()` or `/dev/poll`, the kernel-poll + feature will be disabled. + +* `erl_xcomp_linux_clock_gettime_correction` - `yes|no`. Defaults to `yes` on + Linux; otherwise, `no`. If `yes`, `clock_gettime(CLOCK_MONOTONIC, _)` on + the target system must work. This variable is recommended to be set to + `no` on Linux systems with kernel versions less than 2.6. + +* `erl_xcomp_linux_nptl` - `yes|no`. Defaults to `yes` on Linux; otherwise, + `no`. If `yes`, the target system must have NPTL (Native POSIX Thread + Library). Older Linux systems have LinuxThreads instead of NPTL (Linux + kernel versions typically less than 2.6). + +* `erl_xcomp_linux_usable_sigaltstack` - `yes|no`. Defaults to `yes` on Linux; + otherwise, `no`. If `yes`, `sigaltstack()` must be usable on the target + system. `sigaltstack()` on Linux kernel versions less than 2.4 are + broken. + +* `erl_xcomp_linux_usable_sigusrx` - `yes|no`. Defaults to `yes`. If `yes`, + the `SIGUSR1` and `SIGUSR2` signals must be usable by the ERTS. Old + LinuxThreads thread libraries (Linux kernel versions typically less than + 2.2) used these signals and made them unusable by the ERTS. + +* `erl_xcomp_poll` - `yes|no`. Defaults to `no` on Darwin/MacOSX; otherwise, + `yes`. If `yes`, the target system must have a working `poll()` + implementation that also can handle devices. If `no`, `select()` will be + used instead of `poll()`. + +* `erl_xcomp_putenv_copy` - `yes|no`. Defaults to `no`. If `yes`, the target + system must have a `putenv()` implementation that stores a copy of the + key/value pair. + +* `erl_xcomp_reliable_fpe` - `yes|no`. Defaults to `no`. If `yes`, the target + system must have reliable floating point exceptions. + +Copyright and License +--------------------- + +> %CopyrightBegin% +> +> Copyright Ericsson AB 2009-2010. All Rights Reserved. +> +> The contents of this file are subject to the Erlang Public License, +> Version 1.1, (the "License"); you may not use this file except in +> compliance with the License. You should have received a copy of the +> Erlang Public License along with this software. If not, it can be +> retrieved online at http://www.erlang.org/. +> +> Software distributed under the License is distributed on an "AS IS" +> basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +> the License for the specific language governing rights and limitations +> under the License. +> +> %CopyrightEnd% + + + + diff --git a/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf b/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf index 5ceb4ec145f5..937973974443 100644 --- a/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf +++ b/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf @@ -21,239 +21,238 @@ #### Author: Rickard Green #### #### -------------------------------------------------------------------------- -#### When cross compiling Erlang/OTP using `otp_build', copy this file and set +#### When cross compiling Erlang/OTP using `otp_build`, copy this file and set #### the variables needed below. Then pass the path to the copy of this file as -#### an argument to `otp_build' in the configure stage: -#### `otp_build configure --xcomp-conf=' +#### an argument to `otp_build` in the configure stage: +#### `otp_build configure --xcomp-conf=` #### -------------------------------------------------------------------------- ### Note that you cannot define arbitrary variables in a cross compilation ### configuration file. Only the ones listed below will be guaranteed to be -### visible throughout the whole execution of all `configure' scripts. Other -### variables needs to be defined as arguments to `configure' or exported in +### visible throughout the whole execution of all `configure` scripts. Other +### variables needs to be defined as arguments to `configure` or exported in ### the environment. -### ---- `otp_build' only variables ------------------------------------------- +### ### Variables for `otp_build` Only ### ### Variables in this section are only used, when configuring Erlang/OTP for -### cross compilation using `$ERL_TOP/otp_build configure'. - -### NOTE! These variables currently have *no* effect if you configure using the -### `configure' script directly. - -## erl_xcomp_build - Build system. -## This value will be passed as `--build=$erl_xcomp_build' argument to the -## `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, -## but can be. The full CPU-VENDOR-OS triplet will be created by: -## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build' -## If `erl_xcomp_build=guess', the build system will be guessed using: -## `$ERL_TOP/erts/autoconf/config.guess'. +### cross compilation using `$ERL_TOP/otp_build configure`. + +### *NOTE*! These variables currently have *no* effect if you configure using +### the `configure` script directly. + +## `erl_xcomp_build` - The build system used. This value will be passed as +## `--build=$erl_xcomp_build` argument to the `configure` script. It does +## not have to be a full `CPU-VENDOR-OS` triplet, but can be. The full +## `CPU-VENDOR-OS` triplet will be created by +## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build`. +## If set to `guess`, the build system will be guessed using +## `$ERL_TOP/erts/autoconf/config.guess`. erl_xcomp_build=guess -## erl_xcomp_host - Cross host system. -## This value will be passed as `--host=$erl_xcomp_host' argument to the -## `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, -## but can be. The full CPU-VENDOR-OS triplet will be created by: -## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host' +## `erl_xcomp_host` - Cross host/target system to build for. This value will +## be passed as `--host=$erl_xcomp_host` argument to the `configure` script. +## It does not have to be a full `CPU-VENDOR-OS` triplet, but can be. The +## full `CPU-VENDOR-OS` triplet will be created by: +## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host` erl_xcomp_host=tile -## erl_xcomp_configure_flags - Extra configure flags. -## Extra flags to pass to the `configure' script. +## `erl_xcomp_configure_flags` - Extra configure flags to pass to the +## `configure` script. erl_xcomp_configure_flags="--without-termcap" -### ---- Cross compiler and other tools to use -------------------------------- +### ### Cross Compiler and Other Tools ### -### If the cross compilation tools are prefixed by `-' you probably do -### not need to set these variables (where `' is what has been passed as -### `--host=' argument to `configure'). +### If the cross compilation tools are prefixed by `-` you probably do +### not need to set these variables (where `` is what has been passed as +### `--host=` argument to `configure`). -## CC - C compiler. +### All variables in this section can also be used when native compiling. + +## `CC` - C compiler. #CC= -## CFLAGS - C compiler flags. +## `CFLAGS` - C compiler flags. #CFLAGS= -## STATIC_CFLAGS - Static C compiler flags. +## `STATIC_CFLAGS` - Static C compiler flags. #STATIC_CFLAGS= -## CFLAG_RUNTIME_LIBRARY_PATH - C compiler runtime library path flag. -## This flag should set a specific runtime library path for the shared -## library at link time. Note that this is actually a linker flag, but it -## needs to be passed via the compiler. +## `CFLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library +## search path for the shared libraries. Note that this actually is a +## linker flag, but it needs to be passed via the compiler. #CFLAG_RUNTIME_LIBRARY_PATH= -## CPP - C pre-processor. +## `CPP` - C pre-processor. #CPP= -## CPPFLAGS - C pre-processor flags. +## `CPPFLAGS` - C pre-processor flags. #CPPFLAGS= -## CXX - C++ compiler. +## `CXX` - C++ compiler. #CXX= -## CXXFLAGS - C++ compiler flags. +## `CXXFLAGS` - C++ compiler flags. #CXXFLAGS= -## LD - Linker. +## `LD` - Linker. #LD= -## LDFLAGS - Linker flags. +## `LDFLAGS` - Linker flags. #LDFLAGS= -## LIBS - Libraries. +## `LIBS` - Libraries. #LIBS= -### -- Dynamic Erlang Driver linker flags -- +### #### *D*ynamic *E*rlang *D*river Linking #### -### NOTE! Either set all or non of the DED_LD* variables. +### *NOTE*! Either set all or none of the `DED_LD*` variables. -## DED_LD - Linker. +## `DED_LD` - Linker for Dynamically loaded Erlang Drivers. #DED_LD= -## DED_LDFLAGS - Linker flags. +## `DED_LDFLAGS` - Linker flags to use with `DED_LD`. #DED_LDFLAGS= -## DED_LD_FLAG_RUNTIME_LIBRARY_PATH - Linker runtime library path flag. -## This flag should set a specific runtime library path for the shared -## library at link time. +## `DED_LD_FLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library +## search path for shared libraries when linking with `DED_LD`. #DED_LD_FLAG_RUNTIME_LIBRARY_PATH= -### -- Large file support -- +### #### Large File Support #### -### NOTE! Either set all or non of the LFS_* variables. +### *NOTE*! Either set all or none of the `LFS_*` variables. -## LFS_CFLAGS - Large file support C compiler flags. +## `LFS_CFLAGS` - Large file support C compiler flags. #LFS_CFLAGS= -## LFS_LDFLAGS - Large file support linker flags. +## `LFS_LDFLAGS` - Large file support linker flags. #LFS_LDFLAGS= -## LFS_LIBS - Large file support libraries. +## `LFS_LIBS` - Large file support libraries. #LFS_LIBS= -### -- Other tools -- +### #### Other Tools #### -## RANLIB - `ranlib' archive index tool. +## `RANLIB` - `ranlib` archive index tool. #RANLIB= -## AR - `ar' archiving tool. +## `AR` - `ar` archiving tool. #AR= -## GETCONF - `getconf' system configuration inspection tool. +## `GETCONF` - `getconf` system configuration inspection tool. `getconf` is +## currently used for finding out large file support flags to use, and +## on Linux systems for finding out if we have an NPTL thread library or +## not. #GETCONF= -### ---- Cross System Root Locations ------------------------------------------ +### ### Cross System Root Locations ### -## erl_xcomp_sysroot - Absolute cross system root path. -## The absolute path to the system root of the cross compilation -## environment. Currently, the `crypto', `odbc', `ssh' and `ssl' -## applications need the system root. These applications will be skipped -## if the system root has not been set. The system root might be needed -## for other things too. If this is the case and the system root has not -## been set, `configure' will fail and request you to set it. +## `erl_xcomp_sysroot` - The absolute path to the system root of the cross +## compilation environment. Currently, the `crypto`, `odbc`, `ssh` and +## `ssl` applications need the system root. These applications will be +## skipped if the system root has not been set. The system root might be +## needed for other things too. If this is the case and the system root +## has not been set, `configure` will fail and request you to set it. erl_xcomp_sysroot="$TILERA_ROOT/tile" -## erl_xcomp_isysroot - Absolute cross include system root path. -## The absolute path to the system root for includes of the cross -## compilation environment. If not set, this value defaults to -## `$erl_xcomp_sysroot', i.e., only set this value if the include system +## `erl_xcomp_isysroot` - The absolute path to the system root for includes +## of the cross compilation environment. If not set, this value defaults +## to `$erl_xcomp_sysroot`, i.e., only set this value if the include system ## root path is not the same as the system root path. #erl_xcomp_isysroot= -### ---- Optional feature, or bug tests --------------------------------------- +### ### Optional Feature, and Bug Tests ### ### These tests cannot (always) be done automatically when cross compiling. You -### usually does not need to set these variables. Only set these if you really +### usually do not need to set these variables. Only set these if you really ### know what you are doing. ### Note that some of these values will override results of tests performed -### by `configure', and some will not be used until `configure' is sure that +### by `configure`, and some will not be used until `configure` is sure that ### it cannot figure the result out. -### The `configure' script will issue a warning when a default value is used. +### The `configure` script will issue a warning when a default value is used. ### When a variable has been set, no warning will be issued. -## erl_xcomp_bigendian - yes|no -## If `yes', the target system must be big endian. If `no', little endian. -## This can often be automatically detected, but not always. If not -## automatically detected, `configure' will fail unless this variable is -## set. No default value is used, i.e., `configure' will try to figure -## this out automatically. -#erl_xcomp_bigendian= +## `erl_xcomp_after_morecore_hook` - `yes|no`. Defaults to `no`. If `yes`, the +## target system must have a working `__after_morecore_hook` that can be +## used for tracking used `malloc()` implementations core memory usage. +## This is currently only used by unsupported features. +#erl_xcomp_after_morecore_hook= -## erl_xcomp_linux_clock_gettime_correction - yes|no (defaults to `yes' on -## Linux; otherwise, `no') -## If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on the target system must -## work. This variable is recommended to be set to `no' on Linux systems -## with kernel versions less than 2.6. -#erl_xcomp_linux_clock_gettime_correction= +## `erl_xcomp_bigendian` - `yes|no`. No default. If `yes`, the target system +## must be big endian. If `no`, little endian. This can often be +## automatically detected, but not always. If not automatically detected, +## `configure` will fail unless this variable is set. Since no default +## value is used, `configure` will try to figure this out automatically. +#erl_xcomp_bigendian= -## erl_xcomp_linux_nptl - yes|no (defaults to `yes' on Linux; otherwise, `no') -## If `yes', the target system must have NPTL (Native POSIX Thread Library). -## Older Linux systems have LinuxThreads instead of NPTL (Linux kernel -## versions typically less than 2.6). -#erl_xcomp_linux_nptl= +## `erl_xcomp_clock_gettime_cpu_time` - `yes|no`. Defaults to `no`. If `yes`, +## the target system must have a working `clock_gettime()` implementation +## that can be used for retrieving process CPU time. +#erl_xcomp_clock_gettime_cpu_time= -## erl_xcomp_linux_usable_sigusrx - yes|no (defaults to `yes') -## If `yes', the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. -## Old LinuxThreads thread libraries (Linux kernel versions less than 2.2) -## used these signals and made them unusable by the ERTS. -#erl_xcomp_linux_usable_sigusrx= +## `erl_xcomp_getaddrinfo` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have a working `getaddrinfo()` implementation that can +## handle both IPv4 and IPv6. +erl_xcomp_getaddrinfo=yes -## erl_xcomp_linux_usable_sigaltstack - yes|no (defaults to `yes' on Linux; -## otherwise, `no') -## If `yes', `sigaltstack()' must be usable on the target system. -## `sigaltstack()' on Linux kernel versions less than 2.4 are broken. -#erl_xcomp_linux_usable_sigaltstack= +## `erl_xcomp_gethrvtime_procfs_ioctl` - `yes|no`. Defaults to `no`. If `yes`, +## the target system must have a working `gethrvtime()` implementation and +## is used with procfs `ioctl()`. +#erl_xcomp_gethrvtime_procfs_ioctl= -## erl_xcomp_poll - yes|no (defaults to `no' on Darwin/MacOSX; otherwise, `yes') -## If `yes', the target system must have a working `poll()' implementation -## that also can handle devices. If `no', `select()' will be used instead of -## `poll()'. -#erl_xcomp_poll= +## `erl_xcomp_dlsym_brk_wrappers` - `yes|no`. Defaults to `no`. If `yes`, the +## target system must have a working `dlsym(RTLD_NEXT, )` implementation +## that can be used on `brk` and `sbrk` symbols used by the `malloc()` +## implementation in use, and by this track the `malloc()` implementations +## core memory usage. This is currently only used by unsupported features. +#erl_xcomp_dlsym_brk_wrappers= -## erl_xcomp_kqueue - yes|no (defaults to `no') -## If `yes', the target system must have a working `kqueue()' implementation -## that returns a file descriptor which can be used by `poll()' and/or -## `select()'. If `no' and the target system has not got `epoll()' or -## `/dev/poll', the kernel-poll feature will be disabled. +## `erl_xcomp_kqueue` - `yes|no`. Defaults to `no`. If `yes`, the target system +## must have a working `kqueue()` implementation that returns a file +## descriptor which can be used by `poll()` and/or `select()`. If `no` and +## the target system has not got `epoll()` or `/dev/poll`, the kernel-poll +## feature will be disabled. #erl_xcomp_kqueue= -## erl_xcomp_putenv_copy - yes|no (defaults to `no') -## If `yes', the target system must have a `putenv()' implementation that -## stores a copy of the key/value pair. -#erl_xcomp_putenv_copy= +## `erl_xcomp_linux_clock_gettime_correction` - `yes|no`. Defaults to `yes` on +## Linux; otherwise, `no`. If `yes`, `clock_gettime(CLOCK_MONOTONIC, _)` on +## the target system must work. This variable is recommended to be set to +## `no` on Linux systems with kernel versions less than 2.6. +#erl_xcomp_linux_clock_gettime_correction= -## erl_xcomp_reliable_fpe - yes|no (defaults to `no') -## If `yes', the target system must have reliable floating point exceptions. -#erl_xcomp_reliable_fpe= +## `erl_xcomp_linux_nptl` - `yes|no`. Defaults to `yes` on Linux; otherwise, +## `no`. If `yes`, the target system must have NPTL (Native POSIX Thread +## Library). Older Linux systems have LinuxThreads instead of NPTL (Linux +## kernel versions typically less than 2.6). +#erl_xcomp_linux_nptl= -## erl_xcomp_getaddrinfo - yes|no (defaults to `no') -## If `yes', the target system must have a working `getaddrinfo()' -## implementation that can handle both IPv4 and IPv6. -erl_xcomp_getaddrinfo=yes +## `erl_xcomp_linux_usable_sigaltstack` - `yes|no`. Defaults to `yes` on Linux; +## otherwise, `no`. If `yes`, `sigaltstack()` must be usable on the target +## system. `sigaltstack()` on Linux kernel versions less than 2.4 are +## broken. +#erl_xcomp_linux_usable_sigaltstack= -## erl_xcomp_gethrvtime_procfs_ioctl - yes|no (defaults to `no') -## If `yes', the target system must have a working `gethrvtime()' -## implementation and is used with procfs `ioctl()'. -#erl_xcomp_gethrvtime_procfs_ioctl= +## `erl_xcomp_linux_usable_sigusrx` - `yes|no`. Defaults to `yes`. If `yes`, +## the `SIGUSR1` and `SIGUSR2` signals must be usable by the ERTS. Old +## LinuxThreads thread libraries (Linux kernel versions typically less than +## 2.2) used these signals and made them unusable by the ERTS. +#erl_xcomp_linux_usable_sigusrx= -## erl_xcomp_clock_gettime_cpu_time - yes|no (defaults to `no') -## If `yes', the target system must have a working `clock_gettime()' -## implementation that can be used for retrieving process CPU time. -#erl_xcomp_clock_gettime_cpu_time= +## `erl_xcomp_poll` - `yes|no`. Defaults to `no` on Darwin/MacOSX; otherwise, +## `yes`. If `yes`, the target system must have a working `poll()` +## implementation that also can handle devices. If `no`, `select()` will be +## used instead of `poll()`. +#erl_xcomp_poll= -## erl_xcomp_after_morecore_hook - yes|no (defaults to `no') -## If `yes', the target system must have a working `__after_morecore_hook' -## that can be used for tracking used `malloc()' implementations core memory -## usage. -#erl_xcomp_after_morecore_hook= +## `erl_xcomp_putenv_copy` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have a `putenv()` implementation that stores a copy of the +## key/value pair. +#erl_xcomp_putenv_copy= -## erl_xcomp_dlsym_brk_wrappers - yes|no (defaults to `no') -## If `yes', the target system must have a working `dlsym(RTLD_NEXT, )' -## implementation that can be used on `brk' and `sbrk' symbols used by the -## `malloc()' implementation in use, and by this track the `malloc()' -## implementations core memory usage. -#erl_xcomp_dlsym_brk_wrappers= +## `erl_xcomp_reliable_fpe` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have reliable floating point exceptions. +#erl_xcomp_reliable_fpe= -#### -------------------------------------------------------------------------- +#### diff --git a/xcomp/erl-xcomp-vxworks_ppc32.conf b/xcomp/erl-xcomp-vxworks_ppc32.conf index aa7c652d80d1..b75c7444bbce 100644 --- a/xcomp/erl-xcomp-vxworks_ppc32.conf +++ b/xcomp/erl-xcomp-vxworks_ppc32.conf @@ -21,239 +21,238 @@ #### Author: Rickard Green/Patrik Nyblom #### #### -------------------------------------------------------------------------- -#### When cross compiling Erlang/OTP using `otp_build', copy this file and set +#### When cross compiling Erlang/OTP using `otp_build`, copy this file and set #### the variables needed below. Then pass the path to the copy of this file as -#### an argument to `otp_build' in the configure stage: -#### `otp_build configure --xcomp-conf=' +#### an argument to `otp_build` in the configure stage: +#### `otp_build configure --xcomp-conf=` #### -------------------------------------------------------------------------- ### Note that you cannot define arbitrary variables in a cross compilation ### configuration file. Only the ones listed below will be guaranteed to be -### visible throughout the whole execution of all `configure' scripts. Other -### variables needs to be defined as arguments to `configure' or exported in +### visible throughout the whole execution of all `configure` scripts. Other +### variables needs to be defined as arguments to `configure` or exported in ### the environment. -### ---- `otp_build' only variables ------------------------------------------- +### ### Variables for `otp_build` Only ### ### Variables in this section are only used, when configuring Erlang/OTP for -### cross compilation using `$ERL_TOP/otp_build configure'. - -### NOTE! These variables currently have *no* effect if you configure using the -### `configure' script directly. - -## erl_xcomp_build - Build system. -## This value will be passed as `--build=$erl_xcomp_build' argument to the -## `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, -## but can be. The full CPU-VENDOR-OS triplet will be created by: -## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build' -## If `erl_xcomp_build=guess', the build system will be guessed using: -## `$ERL_TOP/erts/autoconf/config.guess'. +### cross compilation using `$ERL_TOP/otp_build configure`. + +### *NOTE*! These variables currently have *no* effect if you configure using +### the `configure` script directly. + +## `erl_xcomp_build` - The build system used. This value will be passed as +## `--build=$erl_xcomp_build` argument to the `configure` script. It does +## not have to be a full `CPU-VENDOR-OS` triplet, but can be. The full +## `CPU-VENDOR-OS` triplet will be created by +## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build`. +## If set to `guess`, the build system will be guessed using +## `$ERL_TOP/erts/autoconf/config.guess`. erl_xcomp_build=guess -## erl_xcomp_host - Cross host system. -## This value will be passed as `--host=$erl_xcomp_host' argument to the -## `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, -## but can be. The full CPU-VENDOR-OS triplet will be created by: -## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host' +## `erl_xcomp_host` - Cross host/target system to build for. This value will +## be passed as `--host=$erl_xcomp_host` argument to the `configure` script. +## It does not have to be a full `CPU-VENDOR-OS` triplet, but can be. The +## full `CPU-VENDOR-OS` triplet will be created by: +## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host` erl_xcomp_host=powerpc-wrs-vxworks -## erl_xcomp_configure_flags - Extra configure flags. -## Extra flags to pass to the `configure' script. +## `erl_xcomp_configure_flags` - Extra configure flags to pass to the +## `configure` script. erl_xcomp_configure_flags="--disable-threads --without-termcap" -### ---- Cross compiler and other tools to use -------------------------------- +### ### Cross Compiler and Other Tools ### -### If the cross compilation tools are prefixed by `-' you probably do -### not need to set these variables (where `' is what has been passed as -### `--host=' argument to `configure'). +### If the cross compilation tools are prefixed by `-` you probably do +### not need to set these variables (where `` is what has been passed as +### `--host=` argument to `configure`). -## CC - C compiler. +### All variables in this section can also be used when native compiling. + +## `CC` - C compiler. CC="$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/bin/ccppc" -## CFLAGS - C compiler flags. +## `CFLAGS` - C compiler flags. CFLAGS="-DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -DWANT_NONBLOCKING -DHAVE_SENS -DHAVE_MEMMOVE -DVXWORKS -I$WIND_BASE/vxworks-6.3/target/h -I$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/lib/gcc/powerpc-wrs-vxworks/3.4.4/include -I$WIND_BASE/vxworks-6.3/target/h/wrn/coreip -I$WIND_BASE/vxworks-6.3/target/h -mstrict-align -fvolatile -fno-builtin -mlongcall" -## STATIC_CFLAGS - Static C compiler flags. +## `STATIC_CFLAGS` - Static C compiler flags. #STATIC_CFLAGS= -## CFLAG_RUNTIME_LIBRARY_PATH - C compiler runtime library path flag. -## This flag should set a specific runtime library path for the shared -## library at link time. Note that this is actually a linker flag, but it -## needs to be passed via the compiler. +## `CFLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library +## search path for the shared libraries. Note that this actually is a +## linker flag, but it needs to be passed via the compiler. #CFLAG_RUNTIME_LIBRARY_PATH= -## CPP - C pre-processor. +## `CPP` - C pre-processor. CPP="$CC $CFLAGS -E" -## CPPFLAGS - C pre-processor flags. +## `CPPFLAGS` - C pre-processor flags. #CPPFLAGS= -## CXX - C++ compiler. +## `CXX` - C++ compiler. #CXX= -## CXXFLAGS - C++ compiler flags. +## `CXXFLAGS` - C++ compiler flags. #CXXFLAGS= -## LD - Linker. +## `LD` - Linker. LD="$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/bin/ldppc" -## LDFLAGS - Linker flags. +## `LDFLAGS` - Linker flags. LDFLAGS="-mlongcall" -## LIBS - Libraries. +## `LIBS` - Libraries. #LIBS= -### -- Dynamic Erlang Driver linker flags -- +### #### *D*ynamic *E*rlang *D*river Linking #### -### NOTE! Either set all or non of the DED_LD* variables. +### *NOTE*! Either set all or none of the `DED_LD*` variables. -## DED_LD - Linker. +## `DED_LD` - Linker for Dynamically loaded Erlang Drivers. #DED_LD= -## DED_LDFLAGS - Linker flags. +## `DED_LDFLAGS` - Linker flags to use with `DED_LD`. #DED_LDFLAGS= -## DED_LD_FLAG_RUNTIME_LIBRARY_PATH - Linker runtime library path flag. -## This flag should set a specific runtime library path for the shared -## library at link time. +## `DED_LD_FLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library +## search path for shared libraries when linking with `DED_LD`. #DED_LD_FLAG_RUNTIME_LIBRARY_PATH= -### -- Large file support -- +### #### Large File Support #### -### NOTE! Either set all or non of the LFS_* variables. +### *NOTE*! Either set all or none of the `LFS_*` variables. -## LFS_CFLAGS - Large file support C compiler flags. +## `LFS_CFLAGS` - Large file support C compiler flags. #LFS_CFLAGS= -## LFS_LDFLAGS - Large file support linker flags. +## `LFS_LDFLAGS` - Large file support linker flags. #LFS_LDFLAGS= -## LFS_LIBS - Large file support libraries. +## `LFS_LIBS` - Large file support libraries. #LFS_LIBS= -### -- Other tools -- +### #### Other Tools #### -## RANLIB - `ranlib' archive index tool. +## `RANLIB` - `ranlib` archive index tool. RANLIB="$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/bin/ranlibppc" -## AR - `ar' archiving tool. +## `AR` - `ar` archiving tool. AR="$WIND_BASE/gnu/3.4.4-vxworks-6.3/$WIND_HOST_TYPE/bin/arppc" -## GETCONF - `getconf' system configuration inspection tool. +## `GETCONF` - `getconf` system configuration inspection tool. `getconf` is +## currently used for finding out large file support flags to use, and +## on Linux systems for finding out if we have an NPTL thread library or +## not. #GETCONF= -### ---- Cross System Root Locations ------------------------------------------ +### ### Cross System Root Locations ### -## erl_xcomp_sysroot - Absolute cross system root path. -## The absolute path to the system root of the cross compilation -## environment. Currently, the `crypto', `odbc', `ssh' and `ssl' -## applications need the system root. These applications will be skipped -## if the system root has not been set. The system root might be needed -## for other things too. If this is the case and the system root has not -## been set, `configure' will fail and request you to set it. +## `erl_xcomp_sysroot` - The absolute path to the system root of the cross +## compilation environment. Currently, the `crypto`, `odbc`, `ssh` and +## `ssl` applications need the system root. These applications will be +## skipped if the system root has not been set. The system root might be +## needed for other things too. If this is the case and the system root +## has not been set, `configure` will fail and request you to set it. #erl_xcomp_sysroot= -## erl_xcomp_isysroot - Absolute cross include system root path. -## The absolute path to the system root for includes of the cross -## compilation environment. If not set, this value defaults to -## `$erl_xcomp_sysroot', i.e., only set this value if the include system +## `erl_xcomp_isysroot` - The absolute path to the system root for includes +## of the cross compilation environment. If not set, this value defaults +## to `$erl_xcomp_sysroot`, i.e., only set this value if the include system ## root path is not the same as the system root path. #erl_xcomp_isysroot= -### ---- Optional feature, or bug tests --------------------------------------- +### ### Optional Feature, and Bug Tests ### ### These tests cannot (always) be done automatically when cross compiling. You -### usually does not need to set these variables. Only set these if you really +### usually do not need to set these variables. Only set these if you really ### know what you are doing. ### Note that some of these values will override results of tests performed -### by `configure', and some will not be used until `configure' is sure that +### by `configure`, and some will not be used until `configure` is sure that ### it cannot figure the result out. -### The `configure' script will issue a warning when a default value is used. +### The `configure` script will issue a warning when a default value is used. ### When a variable has been set, no warning will be issued. -## erl_xcomp_bigendian - yes|no -## If `yes', the target system must be big endian. If `no', little endian. -## This can often be automatically detected, but not always. If not -## automatically detected, `configure' will fail unless this variable is -## set. No default value is used, i.e., `configure' will try to figure -## this out automatically. -erl_xcomp_bigendian=yes +## `erl_xcomp_after_morecore_hook` - `yes|no`. Defaults to `no`. If `yes`, the +## target system must have a working `__after_morecore_hook` that can be +## used for tracking used `malloc()` implementations core memory usage. +## This is currently only used by unsupported features. +#erl_xcomp_after_morecore_hook= -## erl_xcomp_linux_clock_gettime_correction - yes|no (defaults to `yes' on -## Linux; otherwise, `no') -## If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on the target system must -## work. This variable is recommended to be set to `no' on Linux systems -## with kernel versions less than 2.6. -#erl_xcomp_linux_clock_gettime_correction= +## `erl_xcomp_bigendian` - `yes|no`. No default. If `yes`, the target system +## must be big endian. If `no`, little endian. This can often be +## automatically detected, but not always. If not automatically detected, +## `configure` will fail unless this variable is set. Since no default +## value is used, `configure` will try to figure this out automatically. +erl_xcomp_bigendian=yes -## erl_xcomp_linux_nptl - yes|no (defaults to `yes' on Linux; otherwise, `no') -## If `yes', the target system must have NPTL (Native POSIX Thread Library). -## Older Linux systems have LinuxThreads instead of NPTL (Linux kernel -## versions typically less than 2.6). -#erl_xcomp_linux_nptl= +## `erl_xcomp_clock_gettime_cpu_time` - `yes|no`. Defaults to `no`. If `yes`, +## the target system must have a working `clock_gettime()` implementation +## that can be used for retrieving process CPU time. +#erl_xcomp_clock_gettime_cpu_time= -## erl_xcomp_linux_usable_sigusrx - yes|no (defaults to `yes') -## If `yes', the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. -## Old LinuxThreads thread libraries (Linux kernel versions less than 2.2) -## used these signals and made them unusable by the ERTS. -#erl_xcomp_linux_usable_sigusrx= +## `erl_xcomp_getaddrinfo` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have a working `getaddrinfo()` implementation that can +## handle both IPv4 and IPv6. +#erl_xcomp_getaddrinfo= -## erl_xcomp_linux_usable_sigaltstack - yes|no (defaults to `yes' on Linux; -## otherwise, `no') -## If `yes', `sigaltstack()' must be usable on the target system. -## `sigaltstack()' on Linux kernel versions less than 2.4 are broken. -#erl_xcomp_linux_usable_sigaltstack= +## `erl_xcomp_gethrvtime_procfs_ioctl` - `yes|no`. Defaults to `no`. If `yes`, +## the target system must have a working `gethrvtime()` implementation and +## is used with procfs `ioctl()`. +#erl_xcomp_gethrvtime_procfs_ioctl= -## erl_xcomp_poll - yes|no (defaults to `no' on Darwin/MacOSX; otherwise, `yes') -## If `yes', the target system must have a working `poll()' implementation -## that also can handle devices. If `no', `select()' will be used instead of -## `poll()'. -#erl_xcomp_poll= +## `erl_xcomp_dlsym_brk_wrappers` - `yes|no`. Defaults to `no`. If `yes`, the +## target system must have a working `dlsym(RTLD_NEXT, )` implementation +## that can be used on `brk` and `sbrk` symbols used by the `malloc()` +## implementation in use, and by this track the `malloc()` implementations +## core memory usage. This is currently only used by unsupported features. +#erl_xcomp_dlsym_brk_wrappers= -## erl_xcomp_kqueue - yes|no (defaults to `no') -## If `yes', the target system must have a working `kqueue()' implementation -## that returns a file descriptor which can be used by `poll()' and/or -## `select()'. If `no' and the target system has not got `epoll()' or -## `/dev/poll', the kernel-poll feature will be disabled. +## `erl_xcomp_kqueue` - `yes|no`. Defaults to `no`. If `yes`, the target system +## must have a working `kqueue()` implementation that returns a file +## descriptor which can be used by `poll()` and/or `select()`. If `no` and +## the target system has not got `epoll()` or `/dev/poll`, the kernel-poll +## feature will be disabled. #erl_xcomp_kqueue= -## erl_xcomp_putenv_copy - yes|no (defaults to `no') -## If `yes', the target system must have a `putenv()' implementation that -## stores a copy of the key/value pair. -#erl_xcomp_putenv_copy= +## `erl_xcomp_linux_clock_gettime_correction` - `yes|no`. Defaults to `yes` on +## Linux; otherwise, `no`. If `yes`, `clock_gettime(CLOCK_MONOTONIC, _)` on +## the target system must work. This variable is recommended to be set to +## `no` on Linux systems with kernel versions less than 2.6. +#erl_xcomp_linux_clock_gettime_correction= -## erl_xcomp_reliable_fpe - yes|no (defaults to `no') -## If `yes', the target system must have reliable floating point exceptions. -#erl_xcomp_reliable_fpe= +## `erl_xcomp_linux_nptl` - `yes|no`. Defaults to `yes` on Linux; otherwise, +## `no`. If `yes`, the target system must have NPTL (Native POSIX Thread +## Library). Older Linux systems have LinuxThreads instead of NPTL (Linux +## kernel versions typically less than 2.6). +#erl_xcomp_linux_nptl= -## erl_xcomp_getaddrinfo - yes|no (defaults to `no') -## If `yes', the target system must have a working `getaddrinfo()' -## implementation that can handle both IPv4 and IPv6. -#erl_xcomp_getaddrinfo= +## `erl_xcomp_linux_usable_sigaltstack` - `yes|no`. Defaults to `yes` on Linux; +## otherwise, `no`. If `yes`, `sigaltstack()` must be usable on the target +## system. `sigaltstack()` on Linux kernel versions less than 2.4 are +## broken. +#erl_xcomp_linux_usable_sigaltstack= -## erl_xcomp_gethrvtime_procfs_ioctl - yes|no (defaults to `no') -## If `yes', the target system must have a working `gethrvtime()' -## implementation and is used with procfs `ioctl()'. -#erl_xcomp_gethrvtime_procfs_ioctl= +## `erl_xcomp_linux_usable_sigusrx` - `yes|no`. Defaults to `yes`. If `yes`, +## the `SIGUSR1` and `SIGUSR2` signals must be usable by the ERTS. Old +## LinuxThreads thread libraries (Linux kernel versions typically less than +## 2.2) used these signals and made them unusable by the ERTS. +#erl_xcomp_linux_usable_sigusrx= -## erl_xcomp_clock_gettime_cpu_time - yes|no (defaults to `no') -## If `yes', the target system must have a working `clock_gettime()' -## implementation that can be used for retrieving process CPU time. -#erl_xcomp_clock_gettime_cpu_time= +## `erl_xcomp_poll` - `yes|no`. Defaults to `no` on Darwin/MacOSX; otherwise, +## `yes`. If `yes`, the target system must have a working `poll()` +## implementation that also can handle devices. If `no`, `select()` will be +## used instead of `poll()`. +#erl_xcomp_poll= -## erl_xcomp_after_morecore_hook - yes|no (defaults to `no') -## If `yes', the target system must have a working `__after_morecore_hook' -## that can be used for tracking used `malloc()' implementations core memory -## usage. -#erl_xcomp_after_morecore_hook= +## `erl_xcomp_putenv_copy` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have a `putenv()` implementation that stores a copy of the +## key/value pair. +#erl_xcomp_putenv_copy= -## erl_xcomp_dlsym_brk_wrappers - yes|no (defaults to `no') -## If `yes', the target system must have a working `dlsym(RTLD_NEXT, )' -## implementation that can be used on `brk' and `sbrk' symbols used by the -## `malloc()' implementation in use, and by this track the `malloc()' -## implementations core memory usage. -#erl_xcomp_dlsym_brk_wrappers= +## `erl_xcomp_reliable_fpe` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have reliable floating point exceptions. +#erl_xcomp_reliable_fpe= -#### -------------------------------------------------------------------------- +#### diff --git a/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf b/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf index 1d578761727f..a0dd7c911529 100644 --- a/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf +++ b/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf @@ -21,239 +21,238 @@ #### Author: Rickard Green #### #### -------------------------------------------------------------------------- -#### When cross compiling Erlang/OTP using `otp_build', copy this file and set +#### When cross compiling Erlang/OTP using `otp_build`, copy this file and set #### the variables needed below. Then pass the path to the copy of this file as -#### an argument to `otp_build' in the configure stage: -#### `otp_build configure --xcomp-conf=' +#### an argument to `otp_build` in the configure stage: +#### `otp_build configure --xcomp-conf=` #### -------------------------------------------------------------------------- ### Note that you cannot define arbitrary variables in a cross compilation ### configuration file. Only the ones listed below will be guaranteed to be -### visible throughout the whole execution of all `configure' scripts. Other -### variables needs to be defined as arguments to `configure' or exported in +### visible throughout the whole execution of all `configure` scripts. Other +### variables needs to be defined as arguments to `configure` or exported in ### the environment. -### ---- `otp_build' only variables ------------------------------------------- +### ### Variables for `otp_build` Only ### ### Variables in this section are only used, when configuring Erlang/OTP for -### cross compilation using `$ERL_TOP/otp_build configure'. - -### NOTE! These variables currently have *no* effect if you configure using the -### `configure' script directly. - -## erl_xcomp_build - Build system. -## This value will be passed as `--build=$erl_xcomp_build' argument to the -## `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, -## but can be. The full CPU-VENDOR-OS triplet will be created by: -## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build' -## If `erl_xcomp_build=guess', the build system will be guessed using: -## `$ERL_TOP/erts/autoconf/config.guess'. +### cross compilation using `$ERL_TOP/otp_build configure`. + +### *NOTE*! These variables currently have *no* effect if you configure using +### the `configure` script directly. + +## `erl_xcomp_build` - The build system used. This value will be passed as +## `--build=$erl_xcomp_build` argument to the `configure` script. It does +## not have to be a full `CPU-VENDOR-OS` triplet, but can be. The full +## `CPU-VENDOR-OS` triplet will be created by +## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build`. +## If set to `guess`, the build system will be guessed using +## `$ERL_TOP/erts/autoconf/config.guess`. erl_xcomp_build=guess -## erl_xcomp_host - Cross host system. -## This value will be passed as `--host=$erl_xcomp_host' argument to the -## `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, -## but can be. The full CPU-VENDOR-OS triplet will be created by: -## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host' +## `erl_xcomp_host` - Cross host/target system to build for. This value will +## be passed as `--host=$erl_xcomp_host` argument to the `configure` script. +## It does not have to be a full `CPU-VENDOR-OS` triplet, but can be. The +## full `CPU-VENDOR-OS` triplet will be created by: +## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host` erl_xcomp_host=x86_64-saf-linux-gnu -## erl_xcomp_configure_flags - Extra configure flags. -## Extra flags to pass to the `configure' script. +## `erl_xcomp_configure_flags` - Extra configure flags to pass to the +## `configure` script. #erl_xcomp_configure_flags= -### ---- Cross compiler and other tools to use -------------------------------- +### ### Cross Compiler and Other Tools ### -### If the cross compilation tools are prefixed by `-' you probably do -### not need to set these variables (where `' is what has been passed as -### `--host=' argument to `configure'). +### If the cross compilation tools are prefixed by `-` you probably do +### not need to set these variables (where `` is what has been passed as +### `--host=` argument to `configure`). -## CC - C compiler. +### All variables in this section can also be used when native compiling. + +## `CC` - C compiler. CC=x86_64-saf-gcc -## CFLAGS - C compiler flags. +## `CFLAGS` - C compiler flags. #CFLAGS= -## STATIC_CFLAGS - Static C compiler flags. +## `STATIC_CFLAGS` - Static C compiler flags. #STATIC_CFLAGS= -## CFLAG_RUNTIME_LIBRARY_PATH - C compiler runtime library path flag. -## This flag should set a specific runtime library path for the shared -## library at link time. Note that this is actually a linker flag, but it -## needs to be passed via the compiler. +## `CFLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library +## search path for the shared libraries. Note that this actually is a +## linker flag, but it needs to be passed via the compiler. #CFLAG_RUNTIME_LIBRARY_PATH= -## CPP - C pre-processor. +## `CPP` - C pre-processor. #CPP= -## CPPFLAGS - C pre-processor flags. +## `CPPFLAGS` - C pre-processor flags. #CPPFLAGS= -## CXX - C++ compiler. +## `CXX` - C++ compiler. CXX=x86_64-saf-g++ -## CXXFLAGS - C++ compiler flags. +## `CXXFLAGS` - C++ compiler flags. #CXXFLAGS= -## LD - Linker. +## `LD` - Linker. LD=x86_64-saf-ld -## LDFLAGS - Linker flags. +## `LDFLAGS` - Linker flags. #LDFLAGS= -## LIBS - Libraries. +## `LIBS` - Libraries. #LIBS= -### -- Dynamic Erlang Driver linker flags -- +### #### *D*ynamic *E*rlang *D*river Linking #### -### NOTE! Either set all or non of the DED_LD* variables. +### *NOTE*! Either set all or none of the `DED_LD*` variables. -## DED_LD - Linker. +## `DED_LD` - Linker for Dynamically loaded Erlang Drivers. #DED_LD= -## DED_LDFLAGS - Linker flags. +## `DED_LDFLAGS` - Linker flags to use with `DED_LD`. #DED_LDFLAGS= -## DED_LD_FLAG_RUNTIME_LIBRARY_PATH - Linker runtime library path flag. -## This flag should set a specific runtime library path for the shared -## library at link time. +## `DED_LD_FLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library +## search path for shared libraries when linking with `DED_LD`. #DED_LD_FLAG_RUNTIME_LIBRARY_PATH= -### -- Large file support -- +### #### Large File Support #### -### NOTE! Either set all or non of the LFS_* variables. +### *NOTE*! Either set all or none of the `LFS_*` variables. -## LFS_CFLAGS - Large file support C compiler flags. +## `LFS_CFLAGS` - Large file support C compiler flags. #LFS_CFLAGS= -## LFS_LDFLAGS - Large file support linker flags. +## `LFS_LDFLAGS` - Large file support linker flags. #LFS_LDFLAGS= -## LFS_LIBS - Large file support libraries. +## `LFS_LIBS` - Large file support libraries. #LFS_LIBS= -### -- Other tools -- +### #### Other Tools #### -## RANLIB - `ranlib' archive index tool. +## `RANLIB` - `ranlib` archive index tool. RANLIB=x86_64-saf-ranlib -## AR - `ar' archiving tool. +## `AR` - `ar` archiving tool. AR=x86_64-saf-ar -## GETCONF - `getconf' system configuration inspection tool. +## `GETCONF` - `getconf` system configuration inspection tool. `getconf` is +## currently used for finding out large file support flags to use, and +## on Linux systems for finding out if we have an NPTL thread library or +## not. #GETCONF= -### ---- Cross System Root Locations ------------------------------------------ +### ### Cross System Root Locations ### -## erl_xcomp_sysroot - Absolute cross system root path. -## The absolute path to the system root of the cross compilation -## environment. Currently, the `crypto', `odbc', `ssh' and `ssl' -## applications need the system root. These applications will be skipped -## if the system root has not been set. The system root might be needed -## for other things too. If this is the case and the system root has not -## been set, `configure' will fail and request you to set it. +## `erl_xcomp_sysroot` - The absolute path to the system root of the cross +## compilation environment. Currently, the `crypto`, `odbc`, `ssh` and +## `ssl` applications need the system root. These applications will be +## skipped if the system root has not been set. The system root might be +## needed for other things too. If this is the case and the system root +## has not been set, `configure` will fail and request you to set it. erl_xcomp_sysroot="$SAF_SYSROOT_X86_64" -## erl_xcomp_isysroot - Absolute cross include system root path. -## The absolute path to the system root for includes of the cross -## compilation environment. If not set, this value defaults to -## `$erl_xcomp_sysroot', i.e., only set this value if the include system +## `erl_xcomp_isysroot` - The absolute path to the system root for includes +## of the cross compilation environment. If not set, this value defaults +## to `$erl_xcomp_sysroot`, i.e., only set this value if the include system ## root path is not the same as the system root path. #erl_xcomp_isysroot= -### ---- Optional feature, or bug tests --------------------------------------- +### ### Optional Feature, and Bug Tests ### ### These tests cannot (always) be done automatically when cross compiling. You -### usually does not need to set these variables. Only set these if you really +### usually do not need to set these variables. Only set these if you really ### know what you are doing. ### Note that some of these values will override results of tests performed -### by `configure', and some will not be used until `configure' is sure that +### by `configure`, and some will not be used until `configure` is sure that ### it cannot figure the result out. -### The `configure' script will issue a warning when a default value is used. +### The `configure` script will issue a warning when a default value is used. ### When a variable has been set, no warning will be issued. -## erl_xcomp_bigendian - yes|no -## If `yes', the target system must be big endian. If `no', little endian. -## This can often be automatically detected, but not always. If not -## automatically detected, `configure' will fail unless this variable is -## set. No default value is used, i.e., `configure' will try to figure -## this out automatically. -#erl_xcomp_bigendian= +## `erl_xcomp_after_morecore_hook` - `yes|no`. Defaults to `no`. If `yes`, the +## target system must have a working `__after_morecore_hook` that can be +## used for tracking used `malloc()` implementations core memory usage. +## This is currently only used by unsupported features. +erl_xcomp_after_morecore_hook=yes -## erl_xcomp_linux_clock_gettime_correction - yes|no (defaults to `yes' on -## Linux; otherwise, `no') -## If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on the target system must -## work. This variable is recommended to be set to `no' on Linux systems -## with kernel versions less than 2.6. -#erl_xcomp_linux_clock_gettime_correction= +## `erl_xcomp_bigendian` - `yes|no`. No default. If `yes`, the target system +## must be big endian. If `no`, little endian. This can often be +## automatically detected, but not always. If not automatically detected, +## `configure` will fail unless this variable is set. Since no default +## value is used, `configure` will try to figure this out automatically. +#erl_xcomp_bigendian= -## erl_xcomp_linux_nptl - yes|no (defaults to `yes' on Linux; otherwise, `no') -## If `yes', the target system must have NPTL (Native POSIX Thread Library). -## Older Linux systems have LinuxThreads instead of NPTL (Linux kernel -## versions typically less than 2.6). -#erl_xcomp_linux_nptl= +## `erl_xcomp_clock_gettime_cpu_time` - `yes|no`. Defaults to `no`. If `yes`, +## the target system must have a working `clock_gettime()` implementation +## that can be used for retrieving process CPU time. +#erl_xcomp_clock_gettime_cpu_time= -## erl_xcomp_linux_usable_sigusrx - yes|no (defaults to `yes') -## If `yes', the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. -## Old LinuxThreads thread libraries (Linux kernel versions less than 2.2) -## used these signals and made them unusable by the ERTS. -#erl_xcomp_linux_usable_sigusrx= +## `erl_xcomp_getaddrinfo` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have a working `getaddrinfo()` implementation that can +## handle both IPv4 and IPv6. +erl_xcomp_getaddrinfo=yes -## erl_xcomp_linux_usable_sigaltstack - yes|no (defaults to `yes' on Linux; -## otherwise, `no') -## If `yes', `sigaltstack()' must be usable on the target system. -## `sigaltstack()' on Linux kernel versions less than 2.4 are broken. -#erl_xcomp_linux_usable_sigaltstack= +## `erl_xcomp_gethrvtime_procfs_ioctl` - `yes|no`. Defaults to `no`. If `yes`, +## the target system must have a working `gethrvtime()` implementation and +## is used with procfs `ioctl()`. +#erl_xcomp_gethrvtime_procfs_ioctl= -## erl_xcomp_poll - yes|no (defaults to `no' on Darwin/MacOSX; otherwise, `yes') -## If `yes', the target system must have a working `poll()' implementation -## that also can handle devices. If `no', `select()' will be used instead of -## `poll()'. -#erl_xcomp_poll= +## `erl_xcomp_dlsym_brk_wrappers` - `yes|no`. Defaults to `no`. If `yes`, the +## target system must have a working `dlsym(RTLD_NEXT, )` implementation +## that can be used on `brk` and `sbrk` symbols used by the `malloc()` +## implementation in use, and by this track the `malloc()` implementations +## core memory usage. This is currently only used by unsupported features. +#erl_xcomp_dlsym_brk_wrappers= -## erl_xcomp_kqueue - yes|no (defaults to `no') -## If `yes', the target system must have a working `kqueue()' implementation -## that returns a file descriptor which can be used by `poll()' and/or -## `select()'. If `no' and the target system has not got `epoll()' or -## `/dev/poll', the kernel-poll feature will be disabled. +## `erl_xcomp_kqueue` - `yes|no`. Defaults to `no`. If `yes`, the target system +## must have a working `kqueue()` implementation that returns a file +## descriptor which can be used by `poll()` and/or `select()`. If `no` and +## the target system has not got `epoll()` or `/dev/poll`, the kernel-poll +## feature will be disabled. #erl_xcomp_kqueue= -## erl_xcomp_putenv_copy - yes|no (defaults to `no') -## If `yes', the target system must have a `putenv()' implementation that -## stores a copy of the key/value pair. -#erl_xcomp_putenv_copy= +## `erl_xcomp_linux_clock_gettime_correction` - `yes|no`. Defaults to `yes` on +## Linux; otherwise, `no`. If `yes`, `clock_gettime(CLOCK_MONOTONIC, _)` on +## the target system must work. This variable is recommended to be set to +## `no` on Linux systems with kernel versions less than 2.6. +#erl_xcomp_linux_clock_gettime_correction= -## erl_xcomp_reliable_fpe - yes|no (defaults to `no') -## If `yes', the target system must have reliable floating point exceptions. -#erl_xcomp_reliable_fpe= +## `erl_xcomp_linux_nptl` - `yes|no`. Defaults to `yes` on Linux; otherwise, +## `no`. If `yes`, the target system must have NPTL (Native POSIX Thread +## Library). Older Linux systems have LinuxThreads instead of NPTL (Linux +## kernel versions typically less than 2.6). +#erl_xcomp_linux_nptl= -## erl_xcomp_getaddrinfo - yes|no (defaults to `no') -## If `yes', the target system must have a working `getaddrinfo()' -## implementation that can handle both IPv4 and IPv6. -erl_xcomp_getaddrinfo=yes +## `erl_xcomp_linux_usable_sigaltstack` - `yes|no`. Defaults to `yes` on Linux; +## otherwise, `no`. If `yes`, `sigaltstack()` must be usable on the target +## system. `sigaltstack()` on Linux kernel versions less than 2.4 are +## broken. +#erl_xcomp_linux_usable_sigaltstack= -## erl_xcomp_gethrvtime_procfs_ioctl - yes|no (defaults to `no') -## If `yes', the target system must have a working `gethrvtime()' -## implementation and is used with procfs `ioctl()'. -#erl_xcomp_gethrvtime_procfs_ioctl= +## `erl_xcomp_linux_usable_sigusrx` - `yes|no`. Defaults to `yes`. If `yes`, +## the `SIGUSR1` and `SIGUSR2` signals must be usable by the ERTS. Old +## LinuxThreads thread libraries (Linux kernel versions typically less than +## 2.2) used these signals and made them unusable by the ERTS. +#erl_xcomp_linux_usable_sigusrx= -## erl_xcomp_clock_gettime_cpu_time - yes|no (defaults to `no') -## If `yes', the target system must have a working `clock_gettime()' -## implementation that can be used for retrieving process CPU time. -#erl_xcomp_clock_gettime_cpu_time= +## `erl_xcomp_poll` - `yes|no`. Defaults to `no` on Darwin/MacOSX; otherwise, +## `yes`. If `yes`, the target system must have a working `poll()` +## implementation that also can handle devices. If `no`, `select()` will be +## used instead of `poll()`. +#erl_xcomp_poll= -## erl_xcomp_after_morecore_hook - yes|no (defaults to `no') -## If `yes', the target system must have a working `__after_morecore_hook' -## that can be used for tracking used `malloc()' implementations core memory -## usage. -erl_xcomp_after_morecore_hook=yes +## `erl_xcomp_putenv_copy` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have a `putenv()` implementation that stores a copy of the +## key/value pair. +#erl_xcomp_putenv_copy= -## erl_xcomp_dlsym_brk_wrappers - yes|no (defaults to `no') -## If `yes', the target system must have a working `dlsym(RTLD_NEXT, )' -## implementation that can be used on `brk' and `sbrk' symbols used by the -## `malloc()' implementation in use, and by this track the `malloc()' -## implementations core memory usage. -#erl_xcomp_dlsym_brk_wrappers= +## `erl_xcomp_reliable_fpe` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have reliable floating point exceptions. +#erl_xcomp_reliable_fpe= -#### -------------------------------------------------------------------------- +#### diff --git a/xcomp/erl-xcomp.conf.template b/xcomp/erl-xcomp.conf.template index afbef66af1ca..090f92c15fc5 100644 --- a/xcomp/erl-xcomp.conf.template +++ b/xcomp/erl-xcomp.conf.template @@ -21,239 +21,238 @@ #### Author: Rickard Green #### #### -------------------------------------------------------------------------- -#### When cross compiling Erlang/OTP using `otp_build', copy this file and set +#### When cross compiling Erlang/OTP using `otp_build`, copy this file and set #### the variables needed below. Then pass the path to the copy of this file as -#### an argument to `otp_build' in the configure stage: -#### `otp_build configure --xcomp-conf=' +#### an argument to `otp_build` in the configure stage: +#### `otp_build configure --xcomp-conf=` #### -------------------------------------------------------------------------- ### Note that you cannot define arbitrary variables in a cross compilation ### configuration file. Only the ones listed below will be guaranteed to be -### visible throughout the whole execution of all `configure' scripts. Other -### variables needs to be defined as arguments to `configure' or exported in +### visible throughout the whole execution of all `configure` scripts. Other +### variables needs to be defined as arguments to `configure` or exported in ### the environment. -### ---- `otp_build' only variables ------------------------------------------- +### ### Variables for `otp_build` Only ### ### Variables in this section are only used, when configuring Erlang/OTP for -### cross compilation using `$ERL_TOP/otp_build configure'. - -### NOTE! These variables currently have *no* effect if you configure using the -### `configure' script directly. - -## erl_xcomp_build - Build system. -## This value will be passed as `--build=$erl_xcomp_build' argument to the -## `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, -## but can be. The full CPU-VENDOR-OS triplet will be created by: -## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build' -## If `erl_xcomp_build=guess', the build system will be guessed using: -## `$ERL_TOP/erts/autoconf/config.guess'. +### cross compilation using `$ERL_TOP/otp_build configure`. + +### *NOTE*! These variables currently have *no* effect if you configure using +### the `configure` script directly. + +## `erl_xcomp_build` - The build system used. This value will be passed as +## `--build=$erl_xcomp_build` argument to the `configure` script. It does +## not have to be a full `CPU-VENDOR-OS` triplet, but can be. The full +## `CPU-VENDOR-OS` triplet will be created by +## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build`. +## If set to `guess`, the build system will be guessed using +## `$ERL_TOP/erts/autoconf/config.guess`. #erl_xcomp_build= -## erl_xcomp_host - Cross host system. -## This value will be passed as `--host=$erl_xcomp_host' argument to the -## `configure' script. It does not have to be a full CPU-VENDOR-OS triplet, -## but can be. The full CPU-VENDOR-OS triplet will be created by: -## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host' +## `erl_xcomp_host` - Cross host/target system to build for. This value will +## be passed as `--host=$erl_xcomp_host` argument to the `configure` script. +## It does not have to be a full `CPU-VENDOR-OS` triplet, but can be. The +## full `CPU-VENDOR-OS` triplet will be created by: +## `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host` #erl_xcomp_host= -## erl_xcomp_configure_flags - Extra configure flags. -## Extra flags to pass to the `configure' script. +## `erl_xcomp_configure_flags` - Extra configure flags to pass to the +## `configure` script. #erl_xcomp_configure_flags= -### ---- Cross compiler and other tools to use -------------------------------- +### ### Cross Compiler and Other Tools ### -### If the cross compilation tools are prefixed by `-' you probably do -### not need to set these variables (where `' is what has been passed as -### `--host=' argument to `configure'). +### If the cross compilation tools are prefixed by `-` you probably do +### not need to set these variables (where `` is what has been passed as +### `--host=` argument to `configure`). -## CC - C compiler. +### All variables in this section can also be used when native compiling. + +## `CC` - C compiler. #CC= -## CFLAGS - C compiler flags. +## `CFLAGS` - C compiler flags. #CFLAGS= -## STATIC_CFLAGS - Static C compiler flags. +## `STATIC_CFLAGS` - Static C compiler flags. #STATIC_CFLAGS= -## CFLAG_RUNTIME_LIBRARY_PATH - C compiler runtime library path flag. -## This flag should set a specific runtime library path for the shared -## library at link time. Note that this is actually a linker flag, but it -## needs to be passed via the compiler. +## `CFLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library +## search path for the shared libraries. Note that this actually is a +## linker flag, but it needs to be passed via the compiler. #CFLAG_RUNTIME_LIBRARY_PATH= -## CPP - C pre-processor. +## `CPP` - C pre-processor. #CPP= -## CPPFLAGS - C pre-processor flags. +## `CPPFLAGS` - C pre-processor flags. #CPPFLAGS= -## CXX - C++ compiler. +## `CXX` - C++ compiler. #CXX= -## CXXFLAGS - C++ compiler flags. +## `CXXFLAGS` - C++ compiler flags. #CXXFLAGS= -## LD - Linker. +## `LD` - Linker. #LD= -## LDFLAGS - Linker flags. +## `LDFLAGS` - Linker flags. #LDFLAGS= -## LIBS - Libraries. +## `LIBS` - Libraries. #LIBS= -### -- Dynamic Erlang Driver linker flags -- +### #### *D*ynamic *E*rlang *D*river Linking #### -### NOTE! Either set all or non of the DED_LD* variables. +### *NOTE*! Either set all or none of the `DED_LD*` variables. -## DED_LD - Linker. +## `DED_LD` - Linker for Dynamically loaded Erlang Drivers. #DED_LD= -## DED_LDFLAGS - Linker flags. +## `DED_LDFLAGS` - Linker flags to use with `DED_LD`. #DED_LDFLAGS= -## DED_LD_FLAG_RUNTIME_LIBRARY_PATH - Linker runtime library path flag. -## This flag should set a specific runtime library path for the shared -## library at link time. +## `DED_LD_FLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library +## search path for shared libraries when linking with `DED_LD`. #DED_LD_FLAG_RUNTIME_LIBRARY_PATH= -### -- Large file support -- +### #### Large File Support #### -### NOTE! Either set all or non of the LFS_* variables. +### *NOTE*! Either set all or none of the `LFS_*` variables. -## LFS_CFLAGS - Large file support C compiler flags. +## `LFS_CFLAGS` - Large file support C compiler flags. #LFS_CFLAGS= -## LFS_LDFLAGS - Large file support linker flags. +## `LFS_LDFLAGS` - Large file support linker flags. #LFS_LDFLAGS= -## LFS_LIBS - Large file support libraries. +## `LFS_LIBS` - Large file support libraries. #LFS_LIBS= -### -- Other tools -- +### #### Other Tools #### -## RANLIB - `ranlib' archive index tool. +## `RANLIB` - `ranlib` archive index tool. #RANLIB= -## AR - `ar' archiving tool. +## `AR` - `ar` archiving tool. #AR= -## GETCONF - `getconf' system configuration inspection tool. +## `GETCONF` - `getconf` system configuration inspection tool. `getconf` is +## currently used for finding out large file support flags to use, and +## on Linux systems for finding out if we have an NPTL thread library or +## not. #GETCONF= -### ---- Cross System Root Locations ------------------------------------------ +### ### Cross System Root Locations ### -## erl_xcomp_sysroot - Absolute cross system root path. -## The absolute path to the system root of the cross compilation -## environment. Currently, the `crypto', `odbc', `ssh' and `ssl' -## applications need the system root. These applications will be skipped -## if the system root has not been set. The system root might be needed -## for other things too. If this is the case and the system root has not -## been set, `configure' will fail and request you to set it. +## `erl_xcomp_sysroot` - The absolute path to the system root of the cross +## compilation environment. Currently, the `crypto`, `odbc`, `ssh` and +## `ssl` applications need the system root. These applications will be +## skipped if the system root has not been set. The system root might be +## needed for other things too. If this is the case and the system root +## has not been set, `configure` will fail and request you to set it. #erl_xcomp_sysroot= -## erl_xcomp_isysroot - Absolute cross include system root path. -## The absolute path to the system root for includes of the cross -## compilation environment. If not set, this value defaults to -## `$erl_xcomp_sysroot', i.e., only set this value if the include system +## `erl_xcomp_isysroot` - The absolute path to the system root for includes +## of the cross compilation environment. If not set, this value defaults +## to `$erl_xcomp_sysroot`, i.e., only set this value if the include system ## root path is not the same as the system root path. #erl_xcomp_isysroot= -### ---- Optional feature, or bug tests --------------------------------------- +### ### Optional Feature, and Bug Tests ### ### These tests cannot (always) be done automatically when cross compiling. You -### usually does not need to set these variables. Only set these if you really +### usually do not need to set these variables. Only set these if you really ### know what you are doing. ### Note that some of these values will override results of tests performed -### by `configure', and some will not be used until `configure' is sure that +### by `configure`, and some will not be used until `configure` is sure that ### it cannot figure the result out. -### The `configure' script will issue a warning when a default value is used. +### The `configure` script will issue a warning when a default value is used. ### When a variable has been set, no warning will be issued. -## erl_xcomp_bigendian - yes|no -## If `yes', the target system must be big endian. If `no', little endian. -## This can often be automatically detected, but not always. If not -## automatically detected, `configure' will fail unless this variable is -## set. No default value is used, i.e., `configure' will try to figure -## this out automatically. -#erl_xcomp_bigendian= +## `erl_xcomp_after_morecore_hook` - `yes|no`. Defaults to `no`. If `yes`, the +## target system must have a working `__after_morecore_hook` that can be +## used for tracking used `malloc()` implementations core memory usage. +## This is currently only used by unsupported features. +#erl_xcomp_after_morecore_hook= -## erl_xcomp_linux_clock_gettime_correction - yes|no (defaults to `yes' on -## Linux; otherwise, `no') -## If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on the target system must -## work. This variable is recommended to be set to `no' on Linux systems -## with kernel versions less than 2.6. -#erl_xcomp_linux_clock_gettime_correction= +## `erl_xcomp_bigendian` - `yes|no`. No default. If `yes`, the target system +## must be big endian. If `no`, little endian. This can often be +## automatically detected, but not always. If not automatically detected, +## `configure` will fail unless this variable is set. Since no default +## value is used, `configure` will try to figure this out automatically. +#erl_xcomp_bigendian= -## erl_xcomp_linux_nptl - yes|no (defaults to `yes' on Linux; otherwise, `no') -## If `yes', the target system must have NPTL (Native POSIX Thread Library). -## Older Linux systems have LinuxThreads instead of NPTL (Linux kernel -## versions typically less than 2.6). -#erl_xcomp_linux_nptl= +## `erl_xcomp_clock_gettime_cpu_time` - `yes|no`. Defaults to `no`. If `yes`, +## the target system must have a working `clock_gettime()` implementation +## that can be used for retrieving process CPU time. +#erl_xcomp_clock_gettime_cpu_time= -## erl_xcomp_linux_usable_sigusrx - yes|no (defaults to `yes') -## If `yes', the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. -## Old LinuxThreads thread libraries (Linux kernel versions less than 2.2) -## used these signals and made them unusable by the ERTS. -#erl_xcomp_linux_usable_sigusrx= +## `erl_xcomp_getaddrinfo` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have a working `getaddrinfo()` implementation that can +## handle both IPv4 and IPv6. +#erl_xcomp_getaddrinfo= -## erl_xcomp_linux_usable_sigaltstack - yes|no (defaults to `yes' on Linux; -## otherwise, `no') -## If `yes', `sigaltstack()' must be usable on the target system. -## `sigaltstack()' on Linux kernel versions less than 2.4 are broken. -#erl_xcomp_linux_usable_sigaltstack= +## `erl_xcomp_gethrvtime_procfs_ioctl` - `yes|no`. Defaults to `no`. If `yes`, +## the target system must have a working `gethrvtime()` implementation and +## is used with procfs `ioctl()`. +#erl_xcomp_gethrvtime_procfs_ioctl= -## erl_xcomp_poll - yes|no (defaults to `no' on Darwin/MacOSX; otherwise, `yes') -## If `yes', the target system must have a working `poll()' implementation -## that also can handle devices. If `no', `select()' will be used instead of -## `poll()'. -#erl_xcomp_poll= +## `erl_xcomp_dlsym_brk_wrappers` - `yes|no`. Defaults to `no`. If `yes`, the +## target system must have a working `dlsym(RTLD_NEXT, )` implementation +## that can be used on `brk` and `sbrk` symbols used by the `malloc()` +## implementation in use, and by this track the `malloc()` implementations +## core memory usage. This is currently only used by unsupported features. +#erl_xcomp_dlsym_brk_wrappers= -## erl_xcomp_kqueue - yes|no (defaults to `no') -## If `yes', the target system must have a working `kqueue()' implementation -## that returns a file descriptor which can be used by `poll()' and/or -## `select()'. If `no' and the target system has not got `epoll()' or -## `/dev/poll', the kernel-poll feature will be disabled. +## `erl_xcomp_kqueue` - `yes|no`. Defaults to `no`. If `yes`, the target system +## must have a working `kqueue()` implementation that returns a file +## descriptor which can be used by `poll()` and/or `select()`. If `no` and +## the target system has not got `epoll()` or `/dev/poll`, the kernel-poll +## feature will be disabled. #erl_xcomp_kqueue= -## erl_xcomp_putenv_copy - yes|no (defaults to `no') -## If `yes', the target system must have a `putenv()' implementation that -## stores a copy of the key/value pair. -#erl_xcomp_putenv_copy= +## `erl_xcomp_linux_clock_gettime_correction` - `yes|no`. Defaults to `yes` on +## Linux; otherwise, `no`. If `yes`, `clock_gettime(CLOCK_MONOTONIC, _)` on +## the target system must work. This variable is recommended to be set to +## `no` on Linux systems with kernel versions less than 2.6. +#erl_xcomp_linux_clock_gettime_correction= -## erl_xcomp_reliable_fpe - yes|no (defaults to `no') -## If `yes', the target system must have reliable floating point exceptions. -#erl_xcomp_reliable_fpe= +## `erl_xcomp_linux_nptl` - `yes|no`. Defaults to `yes` on Linux; otherwise, +## `no`. If `yes`, the target system must have NPTL (Native POSIX Thread +## Library). Older Linux systems have LinuxThreads instead of NPTL (Linux +## kernel versions typically less than 2.6). +#erl_xcomp_linux_nptl= -## erl_xcomp_getaddrinfo - yes|no (defaults to `no') -## If `yes', the target system must have a working `getaddrinfo()' -## implementation that can handle both IPv4 and IPv6. -#erl_xcomp_getaddrinfo= +## `erl_xcomp_linux_usable_sigaltstack` - `yes|no`. Defaults to `yes` on Linux; +## otherwise, `no`. If `yes`, `sigaltstack()` must be usable on the target +## system. `sigaltstack()` on Linux kernel versions less than 2.4 are +## broken. +#erl_xcomp_linux_usable_sigaltstack= -## erl_xcomp_gethrvtime_procfs_ioctl - yes|no (defaults to `no') -## If `yes', the target system must have a working `gethrvtime()' -## implementation and is used with procfs `ioctl()'. -#erl_xcomp_gethrvtime_procfs_ioctl= +## `erl_xcomp_linux_usable_sigusrx` - `yes|no`. Defaults to `yes`. If `yes`, +## the `SIGUSR1` and `SIGUSR2` signals must be usable by the ERTS. Old +## LinuxThreads thread libraries (Linux kernel versions typically less than +## 2.2) used these signals and made them unusable by the ERTS. +#erl_xcomp_linux_usable_sigusrx= -## erl_xcomp_clock_gettime_cpu_time - yes|no (defaults to `no') -## If `yes', the target system must have a working `clock_gettime()' -## implementation that can be used for retrieving process CPU time. -#erl_xcomp_clock_gettime_cpu_time= +## `erl_xcomp_poll` - `yes|no`. Defaults to `no` on Darwin/MacOSX; otherwise, +## `yes`. If `yes`, the target system must have a working `poll()` +## implementation that also can handle devices. If `no`, `select()` will be +## used instead of `poll()`. +#erl_xcomp_poll= -## erl_xcomp_after_morecore_hook - yes|no (defaults to `no') -## If `yes', the target system must have a working `__after_morecore_hook' -## that can be used for tracking used `malloc()' implementations core memory -## usage. -#erl_xcomp_after_morecore_hook= +## `erl_xcomp_putenv_copy` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have a `putenv()` implementation that stores a copy of the +## key/value pair. +#erl_xcomp_putenv_copy= -## erl_xcomp_dlsym_brk_wrappers - yes|no (defaults to `no') -## If `yes', the target system must have a working `dlsym(RTLD_NEXT, )' -## implementation that can be used on `brk' and `sbrk' symbols used by the -## `malloc()' implementation in use, and by this track the `malloc()' -## implementations core memory usage. -#erl_xcomp_dlsym_brk_wrappers= +## `erl_xcomp_reliable_fpe` - `yes|no`. Defaults to `no`. If `yes`, the target +## system must have reliable floating point exceptions. +#erl_xcomp_reliable_fpe= -#### -------------------------------------------------------------------------- +####