Skip to content
Go to file
Cannot retrieve contributors at this time
26 lines (23 sloc) 997 Bytes
For latest version, go to
How to use:
1) Manufacture the HDMI receiver board that can be found in
the 'board' directory (CADSoft Eagle format).
2) Open the 'fpga/hdmilight.xise' project in Xilinx ISE and
generate a bit file.
3) Edit the files under the config directory to configure
the LEDs.
4) Edit 'Makefile' in the top level directory and set
the DATA2MEM path for the Xilinx data2mem tool location
on your system.
5) Run 'make' in the top level directory, which will build
'tools/makemem', then the firmware image, then the config
files, before merging the firmware and config into the
final bitfile.
The final result should be hdmilight.bit in the top
level directory.
6) Upload hdmilight.bit to a Papilio Pro FPGA board
7) Install the HDMI receiver board on to the Papilio board.
8) Connect LED strips to output pins
9) Open a serial terminal to the Papilio
10) Connect HDMI source to receiver board
11) It should now be working.
You can’t perform that action at this time.