Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

esp-idf/components/mbedtls/port/include/mbedtls/esp_config.h

Go to file
 
 
Cannot retrieve contributors at this time
3002 lines (2817 sloc) 85.3 KB
Raw Blame
Open in GitHub Desktop
/**
*
* \brief Default mbedTLS configuration options for ESP-IDF
*
* This set of compile-time options may be used to enable
* or disable features selectively, and reduce the global
* memory footprint.
*/
/*
* Copyright The Mbed TLS Contributors
* SPDX-License-Identifier: Apache-2.0
*
* This set of compile-time options may be used to enable
* or disable features selectively, and reduce the global
* memory footprint.
*
* SPDX-FileCopyrightText: The Mbed TLS Contributors
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef ESP_CONFIG_H
#define ESP_CONFIG_H
#include "sdkconfig.h"
#include "mbedtls/mbedtls_config.h"
#include "soc/soc_caps.h"
/**
* \name SECTION: System support
*
* This section sets system specific settings.
* \{
*/
/**
* \def MBEDTLS_HAVE_TIME
*
* System has time.h and time().
* The time does not need to be correct, only time differences are used,
* by contrast with MBEDTLS_HAVE_TIME_DATE
*
* Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT,
* MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and
* MBEDTLS_PLATFORM_STD_TIME.
*
* Comment if your system does not support time functions.
*
* \note If MBEDTLS_TIMING_C is set - to enable the semi-portable timing
* interface - timing.c will include time.h on suitable platforms
* regardless of the setting of MBEDTLS_HAVE_TIME, unless
* MBEDTLS_TIMING_ALT is used. See timing.c for more information.
*/
#ifdef CONFIG_MBEDTLS_HAVE_TIME
#define MBEDTLS_HAVE_TIME
#else
#undef MBEDTLS_HAVE_TIME
#endif
/**
* \def MBEDTLS_HAVE_TIME_DATE
*
* System has time.h and time(), gmtime() and the clock is correct.
* The time needs to be correct (not necesarily very accurate, but at least
* the date should be correct). This is used to verify the validity period of
* X.509 certificates.
*
* Comment if your system does not have a correct clock.
*/
#ifdef CONFIG_MBEDTLS_HAVE_TIME_DATE
#define MBEDTLS_HAVE_TIME_DATE
#else
#undef MBEDTLS_HAVE_TIME_DATE
#endif
/**
* \def MBEDTLS_PLATFORM_TIME_ALT
*
* mbed TLS will provide a function "mbedtls_platform_set_time()"
* that allows you to set an alternative time function pointer.
*
* All these define require MBEDTLS_PLATFORM_C to be defined!
*
* \warning MBEDTLS_PLATFORM_TIME_ALT cannot be defined at the same time as
* MBEDTLS_PLATFORM_TIME_MACRO!
*
* Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME
*/
#ifdef CONFIG_MBEDTLS_PLATFORM_TIME_ALT
#define MBEDTLS_PLATFORM_TIME_ALT
#else
#undef MBEDTLS_PLATFORM_TIME_ALT
#endif
/**
* \def MBEDTLS_PLATFORM_MEMORY
*
* Enable the memory allocation layer.
*
* By default mbed TLS uses the system-provided calloc() and free().
* This allows different allocators (self-implemented or provided) to be
* provided to the platform abstraction layer.
*
* Enabling MBEDTLS_PLATFORM_MEMORY without the
* MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide
* "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and
* free() function pointer at runtime.
*
* Enabling MBEDTLS_PLATFORM_MEMORY and specifying
* MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the
* alternate function at compile time.
*
* Requires: MBEDTLS_PLATFORM_C
*
* Enable this layer to allow use of alternative memory allocators.
*/
#define MBEDTLS_PLATFORM_MEMORY
/** Override calloc(), free() except for case where memory allocation scheme is not set to custom */
#ifndef CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC
#include "esp_mem.h"
#define MBEDTLS_PLATFORM_STD_CALLOC esp_mbedtls_mem_calloc
#define MBEDTLS_PLATFORM_STD_FREE esp_mbedtls_mem_free
#endif
/* \} name SECTION: System support */
/**
* \name SECTION: mbed TLS feature support
*
* This section sets support for features that are or are not needed
* within the modules that are enabled.
* \{
*/
/* The following units have ESP32 hardware support,
uncommenting each _ALT macro will use the
hardware-accelerated implementation. */
#ifdef CONFIG_MBEDTLS_HARDWARE_AES
#define MBEDTLS_AES_ALT
#else
#undef MBEDTLS_AES_ALT
#endif
#ifdef CONFIG_MBEDTLS_HARDWARE_AES
#define MBEDTLS_GCM_ALT
#endif
/* MBEDTLS_SHAxx_ALT to enable hardware SHA support
with software fallback.
*/
#ifdef CONFIG_MBEDTLS_HARDWARE_SHA
#define MBEDTLS_SHA1_ALT
#define MBEDTLS_SHA256_ALT
#if SOC_SHA_SUPPORT_SHA512
#define MBEDTLS_SHA512_ALT
#else
#undef MBEDTLS_SHA512_ALT
#endif
#else
#undef MBEDTLS_SHA1_ALT
#undef MBEDTLS_SHA256_ALT
#undef MBEDTLS_SHA512_ALT
#endif
/* MBEDTLS_MDx_ALT to enable ROM MD support
with software fallback.
*/
#ifdef CONFIG_MBEDTLS_ROM_MD5
#define MBEDTLS_MD5_ALT
#else
#undef MBEDTLS_MD5_ALT
#endif
/* The following MPI (bignum) functions have hardware support.
* Uncommenting these macros will use the hardware-accelerated
* implementations.
*/
#ifdef CONFIG_MBEDTLS_HARDWARE_MPI
#ifdef CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI
/* Prefer hardware and fallback to software */
#define MBEDTLS_MPI_EXP_MOD_ALT_FALLBACK
#else
/* Hardware only mode */
#define MBEDTLS_MPI_EXP_MOD_ALT
#endif
#define MBEDTLS_MPI_MUL_MPI_ALT
#else
#undef MBEDTLS_MPI_EXP_MOD_ALT_FALLBACK
#undef MBEDTLS_MPI_EXP_MOD_ALT
#undef MBEDTLS_MPI_MUL_MPI_ALT
#endif
#ifdef CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN
#define MBEDTLS_ECDSA_SIGN_ALT
#endif
#ifdef CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY
#define MBEDTLS_ECDSA_VERIFY_ALT
#endif
#ifdef CONFIG_MBEDTLS_HARDWARE_ECC
#ifdef CONFIG_MBEDTLS_ECC_OTHER_CURVES_SOFT_FALLBACK
/* Use hardware accelerator for SECP192R1 and SECP256R1 curves,
* software implementation for rest of the curves
*/
#define MBEDTLS_ECP_MUL_ALT_SOFT_FALLBACK
#define MBEDTLS_ECP_VERIFY_ALT_SOFT_FALLBACK
#else
/* Only hardware accelerator support */
#define MBEDTLS_ECP_MUL_ALT
#define MBEDTLS_ECP_VERIFY_ALT
#endif
#else
#undef MBEDTLS_ECP_MUL_ALT
#undef MBEDTLS_ECP_MUL_ALT_SOFT_FALLBACK
#undef MBEDTLS_ECP_VERIFY_ALT
#undef MBEDTLS_ECP_VERIFY_ALT_SOFT_FALLBACK
#endif
/**
* \def MBEDTLS_ENTROPY_HARDWARE_ALT
*
* Uncomment this macro to let mbed TLS use your own implementation of a
* hardware entropy collector.
*
* Your function must be called \c mbedtls_hardware_poll(), have the same
* prototype as declared in entropy_poll.h, and accept NULL as first argument.
*
* Uncomment to use your own hardware entropy collector.
*/
#define MBEDTLS_ENTROPY_HARDWARE_ALT
/**
* \def MBEDTLS_AES_ROM_TABLES
*
* Store the AES tables in ROM.
*
* Uncomment this macro to store the AES tables in ROM.
*/
#define MBEDTLS_AES_ROM_TABLES
/**
* \def MBEDTLS_CIPHER_MODE_CBC
*
* Enable Cipher Block Chaining mode (CBC) for symmetric ciphers.
*/
#define MBEDTLS_CIPHER_MODE_CBC
/**
* \def MBEDTLS_CIPHER_MODE_CFB
*
* Enable Cipher Feedback mode (CFB) for symmetric ciphers.
*/
#define MBEDTLS_CIPHER_MODE_CFB
/**
* \def MBEDTLS_CIPHER_MODE_CTR
*
* Enable Counter Block Cipher mode (CTR) for symmetric ciphers.
*/
#define MBEDTLS_CIPHER_MODE_CTR
/**
* \def MBEDTLS_CIPHER_MODE_OFB
*
* Enable Output Feedback mode (OFB) for symmetric ciphers.
*/
#define MBEDTLS_CIPHER_MODE_OFB
/**
* \def MBEDTLS_CIPHER_MODE_XTS
*
* Enable Xor-encrypt-xor with ciphertext stealing mode (XTS) for AES.
*/
#define MBEDTLS_CIPHER_MODE_XTS
/**
* \def MBEDTLS_CIPHER_PADDING_PKCS7
*
* MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for
* specific padding modes in the cipher layer with cipher modes that support
* padding (e.g. CBC)
*
* If you disable all padding modes, only full blocks can be used with CBC.
*
* Enable padding modes in the cipher layer.
*/
#define MBEDTLS_CIPHER_PADDING_PKCS7
#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS
#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN
#define MBEDTLS_CIPHER_PADDING_ZEROS
/**
* \def MBEDTLS_ECP_RESTARTABLE
*
* Enable "non-blocking" ECC operations that can return early and be resumed.
*
* This allows various functions to pause by returning
* #MBEDTLS_ERR_ECP_IN_PROGRESS (or, for functions in the SSL module,
* #MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS) and then be called later again in
* order to further progress and eventually complete their operation. This is
* controlled through mbedtls_ecp_set_max_ops() which limits the maximum
* number of ECC operations a function may perform before pausing; see
* mbedtls_ecp_set_max_ops() for more information.
*
* This is useful in non-threaded environments if you want to avoid blocking
* for too long on ECC (and, hence, X.509 or SSL/TLS) operations.
*
* This option:
* - Adds xxx_restartable() variants of existing operations in the
* following modules, with corresponding restart context types:
* - ECP (for Short Weierstrass curves only): scalar multiplication (mul),
* linear combination (muladd);
* - ECDSA: signature generation & verification;
* - PK: signature generation & verification;
* - X509: certificate chain verification.
* - Adds mbedtls_ecdh_enable_restart() in the ECDH module.
* - Changes the behaviour of TLS 1.2 clients (not servers) when using the
* ECDHE-ECDSA key exchange (not other key exchanges) to make all ECC
* computations restartable:
* - ECDH operations from the key exchange, only for Short Weierstrass
* curves, only when MBEDTLS_USE_PSA_CRYPTO is not enabled.
* - verification of the server's key exchange signature;
* - verification of the server's certificate chain;
* - generation of the client's signature if client authentication is used,
* with an ECC key/certificate.
*
* \note In the cases above, the usual SSL/TLS functions, such as
* mbedtls_ssl_handshake(), can now return
* MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS.
*
* \note This option only works with the default software implementation of
* elliptic curve functionality. It is incompatible with
* MBEDTLS_ECP_ALT, MBEDTLS_ECDH_XXX_ALT, MBEDTLS_ECDSA_XXX_ALT.
*
* Requires: MBEDTLS_ECP_C
*
* Uncomment this macro to enable restartable ECC computations.
*/
#ifdef CONFIG_MBEDTLS_ECP_RESTARTABLE
#define MBEDTLS_ECP_RESTARTABLE
#endif
/**
* \def MBEDTLS_ECDH_LEGACY_CONTEXT
*
* Use a backward compatible ECDH context.
*
* Mbed TLS supports two formats for ECDH contexts (#mbedtls_ecdh_context
* defined in `ecdh.h`). For most applications, the choice of format makes
* no difference, since all library functions can work with either format,
* except that the new format is incompatible with MBEDTLS_ECP_RESTARTABLE.
* The new format used when this option is disabled is smaller
* (56 bytes on a 32-bit platform). In future versions of the library, it
* will support alternative implementations of ECDH operations.
* The new format is incompatible with applications that access
* context fields directly and with restartable ECP operations.
*
* Define this macro if you enable MBEDTLS_ECP_RESTARTABLE or if you
* want to access ECDH context fields directly. Otherwise you should
* comment out this macro definition.
*
* This option has no effect if #MBEDTLS_ECDH_C is not enabled.
*
* \note This configuration option is experimental. Future versions of the
* library may modify the way the ECDH context layout is configured
* and may modify the layout of the new context type.
*/
#ifdef CONFIG_MBEDTLS_ECDH_LEGACY_CONTEXT
#define MBEDTLS_ECDH_LEGACY_CONTEXT
#endif
/**
* \def MBEDTLS_CMAC_C
*
* Enable the CMAC (Cipher-based Message Authentication Code) mode for block
* ciphers.
*
* \note When #MBEDTLS_CMAC_ALT is active, meaning that the underlying
* implementation of the CMAC algorithm is provided by an alternate
* implementation, that alternate implementation may opt to not support
* AES-192 or 3DES as underlying block ciphers for the CMAC operation.
*
* Module: library/cmac.c
*
* Requires: MBEDTLS_CIPHER_C, MBEDTLS_AES_C or MBEDTLS_DES_C
*
*/
#ifdef CONFIG_MBEDTLS_CMAC_C
#define MBEDTLS_CMAC_C
#endif
/**
* \def MBEDTLS_ECP_DP_SECP192R1_ENABLED
*
* MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve
* module. By default all supported curves are enabled.
*
* Comment macros to disable the curve and functions for it
*/
/* Short Weierstrass curves (supporting ECP, ECDH, ECDSA) */
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED
#define MBEDTLS_ECP_DP_SECP192R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP192R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED
#define MBEDTLS_ECP_DP_SECP224R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP224R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED
#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP256R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED
#define MBEDTLS_ECP_DP_SECP384R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP384R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED
#define MBEDTLS_ECP_DP_SECP521R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP521R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED
#define MBEDTLS_ECP_DP_SECP192K1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP192K1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED
#define MBEDTLS_ECP_DP_SECP224K1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP224K1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED
#define MBEDTLS_ECP_DP_SECP256K1_ENABLED
#else
#undef MBEDTLS_ECP_DP_SECP256K1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED
#define MBEDTLS_ECP_DP_BP256R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_BP256R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED
#define MBEDTLS_ECP_DP_BP384R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_BP384R1_ENABLED
#endif
#ifdef CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED
#define MBEDTLS_ECP_DP_BP512R1_ENABLED
#else
#undef MBEDTLS_ECP_DP_BP512R1_ENABLED
#endif
/* Montgomery curves (supporting ECP) */
#ifdef CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED
#define MBEDTLS_ECP_DP_CURVE25519_ENABLED
#else
#undef MBEDTLS_ECP_DP_CURVE25519_ENABLED
#endif
#ifdef MBEDTLS_ECP_DP_CURVE448_ENABLED
#undef MBEDTLS_ECP_DP_CURVE448_ENABLED
#endif
/**
* \def MBEDTLS_ECP_NIST_OPTIM
*
* Enable specific 'modulo p' routines for each NIST prime.
* Depending on the prime and architecture, makes operations 4 to 8 times
* faster on the corresponding curve.
*
* Comment this macro to disable NIST curves optimisation.
*/
#ifdef CONFIG_MBEDTLS_ECP_NIST_OPTIM
#define MBEDTLS_ECP_NIST_OPTIM
#else
#undef MBEDTLS_ECP_NIST_OPTIM
#endif
/**
* \def MBEDTLS_ECDSA_DETERMINISTIC
*
* Enable deterministic ECDSA (RFC 6979).
* Standard ECDSA is "fragile" in the sense that lack of entropy when signing
* may result in a compromise of the long-term signing key. This is avoided by
* the deterministic variant.
*
* Requires: MBEDTLS_HMAC_DRBG_C, MBEDTLS_ECDSA_C
*
* Comment this macro to disable deterministic ECDSA.
*/
#ifdef CONFIG_MBEDTLS_ECDSA_DETERMINISTIC
#define MBEDTLS_ECDSA_DETERMINISTIC
#else
#undef MBEDTLS_ECDSA_DETERMINISTIC
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
*
* Enable the PSK based ciphersuite modes in SSL / TLS.
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_PSK
#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
*
* Enable the DHE-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_DHM_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK
#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
*
* Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK
#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
*
* Enable the RSA-PSK based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
* MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK
#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
*
* Enable the RSA-only based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
* MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_RSA
#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
*
* Enable the DHE-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
* MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA
#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
*
* Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15,
* MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA
#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
*
* Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C,
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
*
* Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA
#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
*
* Enable the ECDH-RSA based ciphersuite modes in SSL / TLS.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_X509_CRT_PARSE_C
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA
#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
#endif
/**
* \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
*
* Enable the ECJPAKE based ciphersuite modes in SSL / TLS.
*
* \warning This is currently experimental. EC J-PAKE support is based on the
* Thread v1.0.0 specification; incompatible changes to the specification
* might still happen. For this reason, this is disabled by default.
*
* Requires: MBEDTLS_ECJPAKE_C
* MBEDTLS_SHA256_C
* MBEDTLS_ECP_DP_SECP256R1_ENABLED
*
* This enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8
*/
#ifdef CONFIG_MBEDTLS_KEY_EXCHANGE_ECJPAKE
#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
#else
#undef MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
#endif
/**
* \def MBEDTLS_PK_PARSE_EC_EXTENDED
*
* Enhance support for reading EC keys using variants of SEC1 not allowed by
* RFC 5915 and RFC 5480.
*
* Currently this means parsing the SpecifiedECDomain choice of EC
* parameters (only known groups are supported, not arbitrary domains, to
* avoid validation issues).
*
* Disable if you only need to support RFC 5915 + 5480 key formats.
*/
#define MBEDTLS_PK_PARSE_EC_EXTENDED
/**
* \def MBEDTLS_ERROR_STRERROR_DUMMY
*
* Enable a dummy error function to make use of mbedtls_strerror() in
* third party libraries easier when MBEDTLS_ERROR_C is disabled
* (no effect when MBEDTLS_ERROR_C is enabled).
*
* You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're
* not using mbedtls_strerror() or error_strerror() in your application.
*
* Disable if you run into name conflicts and want to really remove the
* mbedtls_strerror()
*/
#define MBEDTLS_ERROR_STRERROR_DUMMY
/**
* \def MBEDTLS_GENPRIME
*
* Enable the prime-number generation code.
*
* Requires: MBEDTLS_BIGNUM_C
*/
#define MBEDTLS_GENPRIME
/**
* \def MBEDTLS_FS_IO
*
* Enable functions that use the filesystem.
*/
#define MBEDTLS_FS_IO
/**
* \def MBEDTLS_NO_PLATFORM_ENTROPY
*
* Do not use built-in platform entropy functions.
* This is useful if your platform does not support
* standards like the /dev/urandom or Windows CryptoAPI.
*
* Uncomment this macro to disable the built-in platform entropy functions.
*/
#define MBEDTLS_NO_PLATFORM_ENTROPY
/**
* \def MBEDTLS_PK_RSA_ALT_SUPPORT
*
* Support external private RSA keys (eg from a HSM) in the PK layer.
*
* Comment this macro to disable support for external private RSA keys.
*/
#define MBEDTLS_PK_RSA_ALT_SUPPORT
/**
* \def MBEDTLS_PKCS1_V15
*
* Enable support for PKCS#1 v1.5 encoding.
*
* Requires: MBEDTLS_RSA_C
*
* This enables support for PKCS#1 v1.5 operations.
*/
#define MBEDTLS_PKCS1_V15
/**
* \def MBEDTLS_PKCS1_V21
*
* Enable support for PKCS#1 v2.1 encoding.
*
* Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C
*
* This enables support for RSAES-OAEP and RSASSA-PSS operations.
*/
#define MBEDTLS_PKCS1_V21
/**
* \def MBEDTLS_SELF_TEST
*
* Enable the checkup functions (*_self_test).
*/
#define MBEDTLS_SELF_TEST
/**
* \def MBEDTLS_SSL_ALL_ALERT_MESSAGES
*
* Enable sending of alert messages in case of encountered errors as per RFC.
* If you choose not to send the alert messages, mbed TLS can still communicate
* with other servers, only debugging of failures is harder.
*
* The advantage of not sending alert messages, is that no information is given
* about reasons for failures thus preventing adversaries of gaining intel.
*
* Enable sending of all alert messages
*/
#define MBEDTLS_SSL_ALL_ALERT_MESSAGES
/**
* \def MBEDTLS_SSL_DTLS_CONNECTION_ID
*
* Enable support for the DTLS Connection ID (CID) extension,
* which allows to identify DTLS connections across changes
* in the underlying transport. The CID functionality is described
* in RFC 9146.
*
* Setting this option enables the SSL APIs `mbedtls_ssl_set_cid()`,
* mbedtls_ssl_get_own_cid()`, `mbedtls_ssl_get_peer_cid()` and
* `mbedtls_ssl_conf_cid()`. See the corresponding documentation for
* more information.
*
* The maximum lengths of outgoing and incoming CIDs can be configured
* through the options
* - MBEDTLS_SSL_CID_OUT_LEN_MAX
* - MBEDTLS_SSL_CID_IN_LEN_MAX.
*
* Requires: MBEDTLS_SSL_PROTO_DTLS
*
* Uncomment to enable the Connection ID extension.
*/
#ifdef CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_DTLS_CONNECTION_ID
#else
#undef MBEDTLS_SSL_DTLS_CONNECTION_ID
#endif
/**
* \def MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT
*
* Defines whether RFC 9146 (default) or the legacy version
* (version draft-ietf-tls-dtls-connection-id-05,
* https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-05)
* is used.
*
* Set the value to 0 for the standard version, and
* 1 for the legacy draft version.
*
* \deprecated Support for the legacy version of the DTLS
* Connection ID feature is deprecated. Please
* switch to the standardized version defined
* in RFC 9146 enabled by utilizing
* MBEDTLS_SSL_DTLS_CONNECTION_ID without use
* of MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT.
*
* Requires: MBEDTLS_SSL_DTLS_CONNECTION_ID
*/
#undef MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT
/**
* \def MBEDTLS_SSL_CONTEXT_SERIALIZATION
*
* Enable serialization of the TLS context structures, through use of the
* functions mbedtls_ssl_context_save() and mbedtls_ssl_context_load().
*
* This pair of functions allows one side of a connection to serialize the
* context associated with the connection, then free or re-use that context
* while the serialized state is persisted elsewhere, and finally deserialize
* that state to a live context for resuming read/write operations on the
* connection. From a protocol perspective, the state of the connection is
* unaffected, in particular this is entirely transparent to the peer.
*
* Note: this is distinct from TLS session resumption, which is part of the
* protocol and fully visible by the peer. TLS session resumption enables
* establishing new connections associated to a saved session with shorter,
* lighter handshakes, while context serialization is a local optimization in
* handling a single, potentially long-lived connection.
*
* Enabling these APIs makes some SSL structures larger, as 64 extra bytes are
* saved after the handshake to allow for more efficient serialization, so if
* you don't need this feature you'll save RAM by disabling it.
*
* Requires: MBEDTLS_GCM_C or MBEDTLS_CCM_C or MBEDTLS_CHACHAPOLY_C
*
* Comment to disable the context serialization APIs.
*/
#ifdef CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION
#define MBEDTLS_SSL_CONTEXT_SERIALIZATION
#else
#undef MBEDTLS_SSL_CONTEXT_SERIALIZATION
#endif
/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC
*
* Enable support for Encrypt-then-MAC, RFC 7366.
*
* This allows peers that both support it to use a more robust protection for
* ciphersuites using CBC, providing deep resistance against timing attacks
* on the padding or underlying cipher.
*
* This only affects CBC ciphersuites, and is useless if none is defined.
*
* Requires: MBEDTLS_SSL_PROTO_TLS1_2
*
* Comment this macro to disable support for Encrypt-then-MAC
*/
#ifdef CONFIG_MBEDTLS_TLS_ENABLED
#define MBEDTLS_SSL_ENCRYPT_THEN_MAC
#else
#undef MBEDTLS_SSL_ENCRYPT_THEN_MAC
#endif
/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET
*
* Enable support for RFC 7627: Session Hash and Extended Master Secret
* Extension.
*
* This was introduced as "the proper fix" to the Triple Handshake family of
* attacks, but it is recommended to always use it (even if you disable
* renegotiation), since it actually fixes a more fundamental issue in the
* original SSL/TLS design, and has implications beyond Triple Handshake.
*
* Requires: MBEDTLS_SSL_PROTO_TLS1_2
*
* Comment this macro to disable support for Extended Master Secret.
*/
#ifdef CONFIG_MBEDTLS_TLS_ENABLED
#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET
#else
#undef MBEDTLS_SSL_EXTENDED_MASTER_SECRET
#endif
/**
* \def MBEDTLS_SSL_FALLBACK_SCSV
*
* Enable support for RFC 7507: Fallback Signaling Cipher Suite Value (SCSV)
* for Preventing Protocol Downgrade Attacks.
*
* For servers, it is recommended to always enable this, unless you support
* only one version of TLS, or know for sure that none of your clients
* implements a fallback strategy.
*
* For clients, you only need this if you're using a fallback strategy, which
* is not recommended in the first place, unless you absolutely need it to
* interoperate with buggy (version-intolerant) servers.
*
* Comment this macro to disable support for FALLBACK_SCSV
*/
#define MBEDTLS_SSL_FALLBACK_SCSV
/**
* \def MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
*
* This option controls the availability of the API mbedtls_ssl_get_peer_cert()
* giving access to the peer's certificate after completion of the handshake.
*
* Unless you need mbedtls_ssl_peer_cert() in your application, it is
* recommended to disable this option for reduced RAM usage.
*
* \note If this option is disabled, mbedtls_ssl_get_peer_cert() is still
* defined, but always returns \c NULL.
*
* \note This option has no influence on the protection against the
* triple handshake attack. Even if it is disabled, Mbed TLS will
* still ensure that certificates do not change during renegotiation,
* for example by keeping a hash of the peer's certificate.
*
* \note This option is required if MBEDTLS_SSL_PROTO_TLS1_3 is set.
*
* Comment this macro to disable storing the peer's certificate
* after the handshake.
*/
#ifdef CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
#define MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
#else
#undef MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
#endif
/**
* \def MBEDTLS_SSL_CBC_RECORD_SPLITTING
*
* Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0.
*
* This is a countermeasure to the BEAST attack, which also minimizes the risk
* of interoperability issues compared to sending 0-length records.
*
* Comment this macro to disable 1/n-1 record splitting.
*/
#if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1)
#define MBEDTLS_SSL_CBC_RECORD_SPLITTING
#else
#undef MBEDTLS_SSL_CBC_RECORD_SPLITTING
#endif
/**
* \def MBEDTLS_SSL_RENEGOTIATION
*
* Enable support for TLS renegotiation.
*
* The two main uses of renegotiation are (1) refresh keys on long-lived
* connections and (2) client authentication after the initial handshake.
* If you don't need renegotiation, it's probably better to disable it, since
* it has been associated with security issues in the past and is easy to
* misuse/misunderstand.
*
* Comment this to disable support for renegotiation.
*
* \note Even if this option is disabled, both client and server are aware
* of the Renegotiation Indication Extension (RFC 5746) used to
* prevent the SSL renegotiation attack (see RFC 5746 Sect. 1).
* (See \c mbedtls_ssl_conf_legacy_renegotiation for the
* configuration of this extension).
*
*/
#ifdef CONFIG_MBEDTLS_SSL_RENEGOTIATION
#define MBEDTLS_SSL_RENEGOTIATION
#else
#undef MBEDTLS_SSL_RENEGOTIATION
#endif
/**
* \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
*
* Enable support for RFC 6066 max_fragment_length extension in SSL.
*
* Comment this macro to disable support for the max_fragment_length extension
*/
#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
/**
* \def MBEDTLS_SSL_RECORD_SIZE_LIMIT
*
* Enable support for RFC 8449 record_size_limit extension in SSL (TLS 1.3 only).
*
* \warning This extension is currently in development and must NOT be used except
* for testing purposes.
*
* Requires: MBEDTLS_SSL_PROTO_TLS1_3
*
* Uncomment this macro to enable support for the record_size_limit extension
*/
//#define MBEDTLS_SSL_RECORD_SIZE_LIMIT
/**
* \def MBEDTLS_SSL_PROTO_TLS1_2
*
* Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled).
*
* Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C
* (Depends on ciphersuites)
*
* Comment this macro to disable support for TLS 1.2 / DTLS 1.2
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_TLS1_2
#define MBEDTLS_SSL_PROTO_TLS1_2
#else
#undef MBEDTLS_SSL_PROTO_TLS1_2
#endif
/**
* \def MBEDTLS_SSL_PROTO_TLS1_3
*
* Enable support for TLS 1.3.
*
* \note The support for TLS 1.3 is not comprehensive yet, in particular
* pre-shared keys are not supported.
* See docs/architecture/tls13-support.md for a description of the TLS
* 1.3 support that this option enables.
*
* Requires: MBEDTLS_SSL_KEEP_PEER_CERTIFICATE
*
* Uncomment this macro to enable the support for TLS 1.3.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_TLS1_3
#define MBEDTLS_SSL_PROTO_TLS1_3
#else
#undef MBEDTLS_SSL_PROTO_TLS1_3
#endif
/**
* \def MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
*
* Enable TLS 1.3 middlebox compatibility mode.
*
* As specified in Section D.4 of RFC 8446, TLS 1.3 offers a compatibility
* mode to make a TLS 1.3 connection more likely to pass through middle boxes
* expecting TLS 1.2 traffic.
*
* Turning on the compatibility mode comes at the cost of a few added bytes
* on the wire, but it doesn't affect compatibility with TLS 1.3 implementations
* that don't use it. Therefore, unless transmission bandwidth is critical and
* you know that middlebox compatibility issues won't occur, it is therefore
* recommended to set this option.
*
* Comment to disable compatibility mode for TLS 1.3. If
* MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not have any
* effect on the build.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
#define MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
#else
#undef MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE
#endif
/**
* \def MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
*
* Enable TLS 1.3 PSK key exchange mode.
*
* Comment to disable support for the PSK key exchange mode in TLS 1.3. If
* MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not have any
* effect on the build.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_TLS1_3_KEXM_PSK
#define MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
#else
#undef MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED
#endif
/**
* \def MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
*
* Enable TLS 1.3 ephemeral key exchange mode.
*
* Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C, MBEDTLS_ECDSA_C or
* MBEDTLS_PKCS1_V21
*
* Comment to disable support for the ephemeral key exchange mode in TLS 1.3.
* If MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not have any
* effect on the build.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_TLS1_3_KEXM_EPHEMERAL
#define MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
#else
#undef MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
#endif
/**
* \def MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
*
* Enable TLS 1.3 PSK ephemeral key exchange mode.
*
* Requires: MBEDTLS_ECDH_C
*
* Comment to disable support for the PSK ephemeral key exchange mode in
* TLS 1.3. If MBEDTLS_SSL_PROTO_TLS1_3 is not enabled, this option does not
* have any effect on the build.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_TLS1_3_KEXM_PSK_EPHEMERAL
#define MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
#else
#undef MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
#endif
/**
* \def MBEDTLS_SSL_TLS1_3_TICKET_AGE_TOLERANCE
*
* Maximum time difference in milliseconds tolerated between the age of a
* ticket from the server and client point of view.
* From the client point of view, the age of a ticket is the time difference
* between the time when the client proposes to the server to use the ticket
* (time of writing of the Pre-Shared Key Extension including the ticket) and
* the time the client received the ticket from the server.
* From the server point of view, the age of a ticket is the time difference
* between the time when the server receives a proposition from the client
* to use the ticket and the time when the ticket was created by the server.
* The server age is expected to be always greater than the client one and
* MBEDTLS_SSL_TLS1_3_TICKET_AGE_TOLERANCE defines the
* maximum difference tolerated for the server to accept the ticket.
* This is not used in TLS 1.2.
*
*/
#define MBEDTLS_SSL_TLS1_3_TICKET_AGE_TOLERANCE 6000
/**
* \def MBEDTLS_SSL_TLS1_3_TICKET_NONCE_LENGTH
*
* Size in bytes of a ticket nonce. This is not used in TLS 1.2.
*
* This must be less than 256.
*/
#define MBEDTLS_SSL_TLS1_3_TICKET_NONCE_LENGTH 32
/**
* \def MBEDTLS_SSL_TLS1_3_DEFAULT_NEW_SESSION_TICKETS
*
* Default number of NewSessionTicket messages to be sent by a TLS 1.3 server
* after handshake completion. This is not used in TLS 1.2 and relevant only if
* the MBEDTLS_SSL_SESSION_TICKETS option is enabled.
*
*/
#define MBEDTLS_SSL_TLS1_3_DEFAULT_NEW_SESSION_TICKETS 1
/**
* \def MBEDTLS_SSL_EARLY_DATA
*
* Enable support for RFC 8446 TLS 1.3 early data.
*
* Requires: MBEDTLS_SSL_SESSION_TICKETS and either
* MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED or
* MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED
*
* Comment this to disable support for early data. If MBEDTLS_SSL_PROTO_TLS1_3
* is not enabled, this option does not have any effect on the build.
*
* This feature is experimental, not completed and thus not ready for
* production.
*
*/
//#define MBEDTLS_SSL_EARLY_DATA
/**
* \def MBEDTLS_SSL_MAX_EARLY_DATA_SIZE
*
* The default maximum amount of 0-RTT data. See the documentation of
* \c mbedtls_ssl_tls13_conf_max_early_data_size() for more information.
*
* It must be positive and smaller than UINT32_MAX.
*
* If MBEDTLS_SSL_EARLY_DATA is not defined, this default value does not
* have any impact on the build.
*
* This feature is experimental, not completed and thus not ready for
* production.
*
*/
#define MBEDTLS_SSL_MAX_EARLY_DATA_SIZE 1024
/**
* \def MBEDTLS_SSL_PROTO_DTLS
*
* Enable support for DTLS (all available versions).
*
* Enable this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2.
*
* Requires: MBEDTLS_SSL_PROTO_TLS1_2
*
* Comment this macro to disable support for DTLS
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_PROTO_DTLS
#else
#undef MBEDTLS_SSL_PROTO_DTLS
#endif
/**
* \def MBEDTLS_SSL_ALPN
*
* Enable support for RFC 7301 Application Layer Protocol Negotiation.
*
* Comment this macro to disable support for ALPN.
*/
#ifdef CONFIG_MBEDTLS_SSL_ALPN
#define MBEDTLS_SSL_ALPN
#else
#undef MBEDTLS_SSL_ALPN
#endif
/**
* \def MBEDTLS_SSL_DTLS_ANTI_REPLAY
*
* Enable support for the anti-replay mechanism in DTLS.
*
* Requires: MBEDTLS_SSL_TLS_C
* MBEDTLS_SSL_PROTO_DTLS
*
* \warning Disabling this is often a security risk!
* See mbedtls_ssl_conf_dtls_anti_replay() for details.
*
* Comment this to disable anti-replay in DTLS.
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
#else
#undef MBEDTLS_SSL_DTLS_ANTI_REPLAY
#endif
/**
* \def MBEDTLS_SSL_DTLS_HELLO_VERIFY
*
* Enable support for HelloVerifyRequest on DTLS servers.
*
* This feature is highly recommended to prevent DTLS servers being used as
* amplifiers in DoS attacks against other hosts. It should always be enabled
* unless you know for sure amplification cannot be a problem in the
* environment in which your server operates.
*
* \warning Disabling this can ba a security risk! (see above)
*
* Requires: MBEDTLS_SSL_PROTO_DTLS
*
* Comment this to disable support for HelloVerifyRequest.
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
#else
#undef MBEDTLS_SSL_DTLS_HELLO_VERIFY
#endif
/**
* \def MBEDTLS_SSL_DTLS_SRTP
*
* Enable support for negotiation of DTLS-SRTP (RFC 5764)
* through the use_srtp extension.
*
* \note This feature provides the minimum functionality required
* to negotiate the use of DTLS-SRTP and to allow the derivation of
* the associated SRTP packet protection key material.
* In particular, the SRTP packet protection itself, as well as the
* demultiplexing of RTP and DTLS packets at the datagram layer
* (see Section 5 of RFC 5764), are not handled by this feature.
* Instead, after successful completion of a handshake negotiating
* the use of DTLS-SRTP, the extended key exporter API
* mbedtls_ssl_conf_export_keys_ext_cb() should be used to implement
* the key exporter described in Section 4.2 of RFC 5764 and RFC 5705
* (this is implemented in the SSL example programs).
* The resulting key should then be passed to an SRTP stack.
*
* Setting this option enables the runtime API
* mbedtls_ssl_conf_dtls_srtp_protection_profiles()
* through which the supported DTLS-SRTP protection
* profiles can be configured. You must call this API at
* runtime if you wish to negotiate the use of DTLS-SRTP.
*
* Requires: MBEDTLS_SSL_PROTO_DTLS
*
* Uncomment this to enable support for use_srtp extension.
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_SRTP
#else
#undef MBEDTLS_SSL_DTLS_SRTP
#endif
/**
* \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
*
* Enable server-side support for clients that reconnect from the same port.
*
* Some clients unexpectedly close the connection and try to reconnect using the
* same source port. This needs special support from the server to handle the
* new connection securely, as described in section 4.2.8 of RFC 6347. This
* flag enables that support.
*
* Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY
*
* Comment this to disable support for clients reusing the source port.
*/
#ifdef CONFIG_MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
#else
#undef MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
#endif
/**
* \def MBEDTLS_SSL_SESSION_TICKETS
*
* Enable support for RFC 5077 session tickets in SSL.
* Client-side, provides full support for session tickets (maintainance of a
* session store remains the responsibility of the application, though).
* Server-side, you also need to provide callbacks for writing and parsing
* tickets, including authenticated encryption and key management. Example
* callbacks are provided by MBEDTLS_SSL_TICKET_C.
*
* Comment this macro to disable support for SSL session tickets
*/
#ifdef CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS
#define MBEDTLS_SSL_SESSION_TICKETS
#else
#undef MBEDTLS_SSL_SESSION_TICKETS
#endif
/**
* \def MBEDTLS_SSL_EXPORT_KEYS
*
* Enable support for exporting key block and master secret.
* This is required for certain users of TLS, e.g. EAP-TLS.
*
* Comment this macro to disable support for key export
*/
#define MBEDTLS_SSL_EXPORT_KEYS
/**
* \def MBEDTLS_SSL_SERVER_NAME_INDICATION
*
* Enable support for RFC 6066 server name indication (SNI) in SSL.
*
* Requires: MBEDTLS_X509_CRT_PARSE_C
*
* Comment this macro to disable support for server name indication in SSL
*/
#define MBEDTLS_SSL_SERVER_NAME_INDICATION
/**
* \def MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
*
* When this option is enabled, the SSL buffer will be resized automatically
* based on the negotiated maximum fragment length in each direction.
*
* Requires: MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
*/
#ifdef CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
#define MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
#else
#undef MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH
#endif
/**
*
* \def MBEDTLS_VERSION_FEATURES
*
* Allow run-time checking of compile-time enabled features. Thus allowing users
* to check at run-time if the library is for instance compiled with threading
* support via mbedtls_version_check_feature().
*
* Requires: MBEDTLS_VERSION_C
*
* Comment this to disable run-time checking and save ROM space
*/
#define MBEDTLS_VERSION_FEATURES
/**
* \def MBEDTLS_X509_RSASSA_PSS_SUPPORT
*
* Enable parsing and verification of X.509 certificates, CRLs and CSRS
* signed with RSASSA-PSS (aka PKCS#1 v2.1).
*
* Comment this macro to disallow using RSASSA-PSS in certificates.
*/
#define MBEDTLS_X509_RSASSA_PSS_SUPPORT
/* \} name SECTION: mbed TLS feature support */
/**
* \name SECTION: mbed TLS modules
*
* This section enables or disables entire modules in mbed TLS
* \{
*/
/**
* \def MBEDTLS_AESNI_C
*
* Enable AES-NI support on x86-64.
*
* Module: library/aesni.c
* Caller: library/aes.c
*
* Requires: MBEDTLS_HAVE_ASM
*
* This modules adds support for the AES-NI instructions on x86-64
*/
#define MBEDTLS_AESNI_C
/**
* \def MBEDTLS_AES_C
*
* Enable the AES block cipher.
*
* Module: library/aes.c
* Caller: library/ssl_tls.c
* library/pem.c
* library/ctr_drbg.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384
* MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256
* MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA
*
* PEM_PARSE uses AES for decrypting encrypted keys.
*/
#ifdef CONFIG_MBEDTLS_AES_C
#define MBEDTLS_AES_C
#else
#undef MBEDTLS_AES_C
#endif
/**
* \def MBEDTLS_ASN1_PARSE_C
*
* Enable the generic ASN1 parser.
*
* Module: library/asn1.c
* Caller: library/x509.c
* library/dhm.c
* library/pkcs12.c
* library/pkcs5.c
* library/pkparse.c
*/
#define MBEDTLS_ASN1_PARSE_C
/**
* \def MBEDTLS_ASN1_WRITE_C
*
* Enable the generic ASN1 writer.
*
* Module: library/asn1write.c
* Caller: library/ecdsa.c
* library/pkwrite.c
* library/x509_create.c
* library/x509write_crt.c
* library/mbedtls_x509write_csr.c
*/
#define MBEDTLS_ASN1_WRITE_C
/**
* \def MBEDTLS_BASE64_C
*
* Enable the Base64 module.
*
* Module: library/base64.c
* Caller: library/pem.c
*
* This module is required for PEM support (required by X.509).
*/
#define MBEDTLS_BASE64_C
/**
* \def MBEDTLS_BIGNUM_C
*
* Enable the multi-precision integer library.
*
* Module: library/bignum.c
* library/bignum_core.c
* library/bignum_mod.c
* library/bignum_mod_raw.c
* Caller: library/dhm.c
* library/ecp.c
* library/ecdsa.c
* library/rsa.c
* library/rsa_alt_helpers.c
* library/ssl_tls.c
*
* This module is required for RSA, DHM and ECC (ECDH, ECDSA) support.
*/
#define MBEDTLS_BIGNUM_C
/**
* \def MBEDTLS_BLOWFISH_C
*
* Enable the Blowfish block cipher.
*
* Module: library/blowfish.c
*/
#ifdef CONFIG_MBEDTLS_BLOWFISH_C
#define MBEDTLS_BLOWFISH_C
#else
#undef MBEDTLS_BLOWFISH_C
#endif
/**
* \def MBEDTLS_CAMELLIA_C
*
* Enable the Camellia block cipher.
*
* Module: library/camellia.c
* Caller: library/ssl_tls.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256
* MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256
*/
#ifdef CONFIG_MBEDTLS_CAMELLIA_C
#define MBEDTLS_CAMELLIA_C
#else
#undef MBEDTLS_CAMELLIA_C
#endif
/**
* \def MBEDTLS_CCM_C
*
* Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher.
*
* Module: library/ccm.c
*
* Requires: MBEDTLS_CIPHER_C, MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C or
* MBEDTLS_ARIA_C
*
* This module enables the AES-CCM ciphersuites, if other requisites are
* enabled as well.
*/
#ifdef CONFIG_MBEDTLS_CCM_C
#define MBEDTLS_CCM_C
#else
#undef MBEDTLS_CCM_C
#endif
/**
* \def MBEDTLS_CERTS_C
*
* Enable the test certificates.
*
* Module: library/certs.c
* Caller:
*
* This module is used for testing (ssl_client/server).
*/
#define MBEDTLS_CERTS_C
/**
* \def MBEDTLS_CHACHA20_C
*
* Enable the ChaCha20 stream cipher.
*
* Module: library/chacha20.c
*/
#ifdef CONFIG_MBEDTLS_CHACHA20_C
#define MBEDTLS_CHACHA20_C
#else
#undef MBEDTLS_CHACHA20_C
#endif
/**
* \def MBEDTLS_CHACHAPOLY_C
*
* Enable the ChaCha20-Poly1305 AEAD algorithm.
*
* Module: library/chachapoly.c
*
* This module requires: MBEDTLS_CHACHA20_C, MBEDTLS_POLY1305_C
*/
#ifdef CONFIG_MBEDTLS_CHACHAPOLY_C
#define MBEDTLS_CHACHAPOLY_C
#else
#undef MBEDTLS_CHACHAPOLY_C
#endif
/**
* \def MBEDTLS_CIPHER_C
*
* Enable the generic cipher layer.
*
* Module: library/cipher.c
* Caller: library/ccm.c
* library/cmac.c
* library/gcm.c
* library/nist_kw.c
* library/pkcs12.c
* library/pkcs5.c
* library/psa_crypto_aead.c
* library/psa_crypto_mac.c
* library/ssl_ciphersuites.c
* library/ssl_msg.c
* library/ssl_ticket.c (unless MBEDTLS_USE_PSA_CRYPTO is enabled)
*
* Uncomment to enable generic cipher wrappers.
*/
#define MBEDTLS_CIPHER_C
/**
* \def MBEDTLS_CTR_DRBG_C
*
* Enable the CTR_DRBG AES-256-based random generator.
*
* Module: library/ctr_drbg.c
* Caller:
*
* Requires: MBEDTLS_AES_C
*
* This module provides the CTR_DRBG AES-256 random number generator.
*/
#define MBEDTLS_CTR_DRBG_C
/**
* \def MBEDTLS_DEBUG_C
*
* Enable the debug functions.
*
* Module: library/debug.c
* Caller: library/ssl_msg.c
* library/ssl_tls.c
* library/ssl_tls12_*.c
* library/ssl_tls13_*.c
*
* This module provides debugging functions.
*/
#if CONFIG_MBEDTLS_DEBUG
#define MBEDTLS_DEBUG_C
#else
#undef MBEDTLS_DEBUG_C
#endif
/**
* \def MBEDTLS_DES_C
*
* Enable the DES block cipher.
*
* Module: library/des.c
* Caller: library/pem.c
* library/ssl_tls.c
*
* This module enables the following ciphersuites (if other requisites are
* enabled as well):
* MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA
* MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA
*
* PEM_PARSE uses DES/3DES for decrypting encrypted keys.
*/
#ifdef CONFIG_MBEDTLS_DES_C
#define MBEDTLS_DES_C
#else
#undef MBEDTLS_DES_C
#endif
/**
* \def MBEDTLS_DHM_C
*
* Enable the Diffie-Hellman-Merkle module.
*
* Module: library/dhm.c
* Caller: library/ssl_tls.c
* library/ssl*_client.c
* library/ssl*_server.c
*
* This module is used by the following key exchanges:
* DHE-RSA, DHE-PSK
*/
#ifdef CONFIG_MBEDTLS_DHM_C
#define MBEDTLS_DHM_C
#else
#undef MBEDTLS_DHM_C
#endif
/**
* \def MBEDTLS_ECDH_C
*
* Enable the elliptic curve Diffie-Hellman library.
*
* Module: library/ecdh.c
* Caller: library/psa_crypto.c
* library/ssl_tls.c
* library/ssl*_client.c
* library/ssl*_server.c
*
* This module is used by the following key exchanges:
* ECDHE-ECDSA, ECDHE-RSA, DHE-PSK
*
* Requires: MBEDTLS_ECP_C
*/
#ifdef CONFIG_MBEDTLS_ECDH_C
#define MBEDTLS_ECDH_C
#else
#undef MBEDTLS_ECDH_C
#endif
/**
* \def MBEDTLS_ECDSA_C
*
* Enable the elliptic curve DSA library.
*
* Module: library/ecdsa.c
* Caller:
*
* This module is used by the following key exchanges:
* ECDHE-ECDSA
*
* Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C,
* and at least one MBEDTLS_ECP_DP_XXX_ENABLED for a
* short Weierstrass curve.
*/
#ifdef CONFIG_MBEDTLS_ECDSA_C
#define MBEDTLS_ECDSA_C
#else
#undef MBEDTLS_ECDSA_C
#endif
/**
* \def MBEDTLS_ECJPAKE_C
*
* Enable the elliptic curve J-PAKE library.
*
* \warning This is currently experimental. EC J-PAKE support is based on the
* Thread v1.0.0 specification; incompatible changes to the specification
* might still happen. For this reason, this is disabled by default.
*
* Module: library/ecjpake.c
* Caller:
*
* This module is used by the following key exchanges:
* ECJPAKE
*
* Requires: MBEDTLS_ECP_C and MBEDTLS_MD_C
*
*/
#ifdef CONFIG_MBEDTLS_ECJPAKE_C
#define MBEDTLS_ECJPAKE_C
#else
#undef MBEDTLS_ECJPAKE_C
#endif
/**
* \def MBEDTLS_ECP_C
*
* Enable the elliptic curve over GF(p) library.
*
* Module: library/ecp.c
* Caller: library/ecdh.c
* library/ecdsa.c
* library/ecjpake.c
*
* Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED
*/
#ifdef CONFIG_MBEDTLS_ECP_C
#define MBEDTLS_ECP_C
#else
#undef MBEDTLS_ECP_C
#endif
/**
* \def MBEDTLS_ENTROPY_C
*
* Enable the platform-specific entropy code.
*
* Module: library/entropy.c
* Caller:
*
* Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C
*
* This module provides a generic entropy pool
*/
#define MBEDTLS_ENTROPY_C
/**
* \def MBEDTLS_ERROR_C
*
* Enable error code to error string conversion.
*
* Module: library/error.c
* Caller:
*
* This module enables mbedtls_strerror().
*/
#define MBEDTLS_ERROR_C
/**
* \def MBEDTLS_GCM_C
*
* Enable the Galois/Counter Mode (GCM).
*
* Module: library/gcm.c
*
* Requires: MBEDTLS_CIPHER_C, MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C or
* MBEDTLS_ARIA_C
*
* This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other
* requisites are enabled as well.
*/
#ifdef CONFIG_MBEDTLS_GCM_C
#define MBEDTLS_GCM_C
#else
#undef MBEDTLS_GCM_C
#endif
/**
* \def MBEDTLS_HKDF_C
*
* Enable the HKDF algorithm (RFC 5869).
*
* Module: library/hkdf.c
* Caller:
*
* Requires: MBEDTLS_MD_C
*
* This module enables support for the Hashed Message Authentication Code
* (HMAC)-based key derivation function (HKDF).
*/
#ifdef CONFIG_MBEDTLS_HKDF_C
#define MBEDTLS_HKDF_C
#else
#undef MBEDTLS_HKDF_C
#endif
/**
* \def MBEDTLS_HMAC_DRBG_C
*
* Enable the HMAC_DRBG random generator.
*
* Module: library/hmac_drbg.c
* Caller:
*
* Requires: MBEDTLS_MD_C
*
* Uncomment to enable the HMAC_DRBG random number geerator.
*/
#define MBEDTLS_HMAC_DRBG_C
/**
* \def MBEDTLS_MD_C
*
* Enable the generic message digest layer.
*
* Requires: one of: MBEDTLS_MD5_C, MBEDTLS_RIPEMD160_C, MBEDTLS_SHA1_C,
* MBEDTLS_SHA224_C, MBEDTLS_SHA256_C, MBEDTLS_SHA384_C,
* MBEDTLS_SHA512_C.
*
* Module: library/md.c
* Caller: library/constant_time.c
* library/ecdsa.c
* library/ecjpake.c
* library/hkdf.c
* library/hmac_drbg.c
* library/pk.c
* library/pkcs5.c
* library/pkcs12.c
* library/psa_crypto_ecp.c
* library/psa_crypto_rsa.c
* library/rsa.c
* library/ssl_cookie.c
* library/ssl_msg.c
* library/ssl_tls.c
* library/x509.c
* library/x509_crt.c
* library/x509write_crt.c
* library/x509write_csr.c
*
* Uncomment to enable generic message digest wrappers.
*/
#define MBEDTLS_MD_C
/**
* \def MBEDTLS_MD5_C
*
* Enable the MD5 hash algorithm.
*
* Module: library/mbedtls_md5.c
* Caller: library/mbedtls_md.c
* library/pem.c
* library/ssl_tls.c
*
* This module is required for SSL/TLS and X.509.
* PEM_PARSE uses MD5 for decrypting encrypted keys.
*/
#define MBEDTLS_MD5_C
/**
* \def MBEDTLS_NET_C
*
* Enable the TCP and UDP over IPv6/IPv4 networking routines.
*
* \note This module only works on POSIX/Unix (including Linux, BSD and OS X)
* and Windows. For other platforms, you'll want to disable it, and write your
* own networking callbacks to be passed to \c mbedtls_ssl_set_bio().
*
* \note See also our Knowledge Base article about porting to a new
* environment:
* https://mbed-tls.readthedocs.io/en/latest/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
*
* Module: library/net_sockets.c
*
* This module provides networking routines.
*/
#ifdef MBEDTLS_NET_C
#undef MBEDTLS_NET_C
#endif
/**
* \def MBEDTLS_OID_C
*
* Enable the OID database.
*
* Module: library/oid.c
* Caller: library/asn1write.c
* library/pkcs5.c
* library/pkparse.c
* library/pkwrite.c
* library/rsa.c
* library/x509.c
* library/x509_create.c
* library/mbedtls_x509_crl.c
* library/mbedtls_x509_crt.c
* library/mbedtls_x509_csr.c
* library/x509write_crt.c
* library/mbedtls_x509write_csr.c
*
* This modules translates between OIDs and internal values.
*/
#define MBEDTLS_OID_C
/**
* \def MBEDTLS_PADLOCK_C
*
* Enable VIA Padlock support on x86.
*
* Module: library/padlock.c
* Caller: library/aes.c
*
* Requires: MBEDTLS_HAVE_ASM
*
* This modules adds support for the VIA PadLock on x86.
*/
#define MBEDTLS_PADLOCK_C
/**
* \def MBEDTLS_PEM_PARSE_C
*
* Enable PEM decoding / parsing.
*
* Module: library/pem.c
* Caller: library/dhm.c
* library/pkparse.c
* library/mbedtls_x509_crl.c
* library/mbedtls_x509_crt.c
* library/mbedtls_x509_csr.c
*
* Requires: MBEDTLS_BASE64_C
*
* This modules adds support for decoding / parsing PEM files.
*/
#ifdef CONFIG_MBEDTLS_PEM_PARSE_C
#define MBEDTLS_PEM_PARSE_C
#else
#undef MBEDTLS_PEM_PARSE_C
#endif
/**
* \def MBEDTLS_PEM_WRITE_C
*
* Enable PEM encoding / writing.
*
* Module: library/pem.c
* Caller: library/pkwrite.c
* library/x509write_crt.c
* library/mbedtls_x509write_csr.c
*
* Requires: MBEDTLS_BASE64_C
*
* This modules adds support for encoding / writing PEM files.
*/
#ifdef CONFIG_MBEDTLS_PEM_WRITE_C
#define MBEDTLS_PEM_WRITE_C
#else
#undef MBEDTLS_PEM_WRITE_C
#endif
/**
* \def MBEDTLS_PK_C
*
* Enable the generic public (asymmetric) key layer.
*
* Module: library/pk.c
* Caller: library/psa_crypto_rsa.c
* library/ssl_tls.c
* library/ssl*_client.c
* library/ssl*_server.c
* library/x509.c
*
* Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C or MBEDTLS_ECP_C
*
* Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C
*
* Uncomment to enable generic public key wrappers.
*/
#define MBEDTLS_PK_C
/**
* \def MBEDTLS_PK_PARSE_C
*
* Enable the generic public (asymmetric) key parser.
*
* Module: library/pkparse.c
* Caller: library/mbedtls_x509_crt.c
* library/mbedtls_x509_csr.c
*
* Requires: MBEDTLS_PK_C
*
* Uncomment to enable generic public key parse functions.
*/
#define MBEDTLS_PK_PARSE_C
/**
* \def MBEDTLS_PK_WRITE_C
*
* Enable the generic public (asymmetric) key writer.
*
* Module: library/pkwrite.c
* Caller: library/x509write.c
*
* Requires: MBEDTLS_PK_C
*
* Uncomment to enable generic public key write functions.
*/
#define MBEDTLS_PK_WRITE_C
/**
* \def MBEDTLS_PKCS5_C
*
* Enable PKCS#5 functions.
*
* Module: library/pkcs5.c
*
* Requires: MBEDTLS_CIPHER_C and MBEDTLS_MD_C
*
* This module adds support for the PKCS#5 functions.
*/
#define MBEDTLS_PKCS5_C
/**
* \def MBEDTLS_PKCS7_C
*
* This feature is a work in progress and not ready for production. Testing and
* validation is incomplete, and handling of malformed inputs may not be robust.
* The API may change.
*
* Enable PKCS7 core for using PKCS7 formatted signatures.
* RFC Link - https://tools.ietf.org/html/rfc2315
*
* Module: library/pkcs7.c
*
* Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_OID_C, MBEDTLS_PK_PARSE_C,
* MBEDTLS_X509_CRT_PARSE_C MBEDTLS_X509_CRL_PARSE_C,
* MBEDTLS_BIGNUM_C, MBEDTLS_MD_C
*
* This module is required for the PKCS #7 parsing modules.
*/
#ifdef CONFIG_MBEDTLS_PKCS7_C
#define MBEDTLS_PKCS7_C
#else
#undef MBEDTLS_PKCS7_C
#endif
/**
* \def MBEDTLS_PKCS12_C
*
* Enable PKCS#12 PBE functions.
* Adds algorithms for parsing PKCS#8 encrypted private keys
*
* Module: library/pkcs12.c
* Caller: library/pkparse.c
*
* Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C
*
* This module enables PKCS#12 functions.
*/
#define MBEDTLS_PKCS12_C
/**
* \def MBEDTLS_PLATFORM_C
*
* Enable the platform abstraction layer that allows you to re-assign
* functions like calloc(), free(), snprintf(), printf(), fprintf(), exit().
*
* Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT
* or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned
* above to be specified at runtime or compile time respectively.
*
* \note This abstraction layer must be enabled on Windows (including MSYS2)
* as other modules rely on it for a fixed snprintf implementation.
*
* Module: library/platform.c
* Caller: Most other .c files
*
* This module enables abstraction of common (libc) functions.
*/
#define MBEDTLS_PLATFORM_C
/**
* \def MBEDTLS_POLY1305_C
*
* Enable the Poly1305 MAC algorithm.
*
* Module: library/poly1305.c
* Caller: library/chachapoly.c
*/
#ifdef CONFIG_MBEDTLS_POLY1305_C
#define MBEDTLS_POLY1305_C
#else
#undef MBEDTLS_POLY1305_C
#endif
/**
* \def MBEDTLS_RIPEMD160_C
*
* Enable the RIPEMD-160 hash algorithm.
*
* Module: library/mbedtls_ripemd160.c
* Caller: library/mbedtls_md.c
*
*/
#ifdef CONFIG_MBEDTLS_RIPEMD160_C
#define MBEDTLS_RIPEMD160_C
#else
#undef MBEDTLS_RIPEMD160_C
#endif
/**
* \def MBEDTLS_RSA_C
*
* Enable the RSA public-key cryptosystem.
*
* Module: library/rsa.c
* library/rsa_alt_helpers.c
* Caller: library/pk.c
* library/psa_crypto.c
* library/ssl_tls.c
* library/ssl*_client.c
* library/ssl*_server.c
*
* This module is used by the following key exchanges:
* RSA, DHE-RSA, ECDHE-RSA, RSA-PSK
*
* Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C
*/
#define MBEDTLS_RSA_C
/**
* \def MBEDTLS_SHA1_C
*
* Enable the SHA1 cryptographic hash algorithm.
*
* Module: library/sha1.c
* Caller: library/md.c
* library/psa_crypto_hash.c
*
* This module is required for TLS 1.2 depending on the handshake parameters,
* and for SHA1-signed certificates.
*
* \warning SHA-1 is considered a weak message digest and its use constitutes
* a security risk. If possible, we recommend avoiding dependencies
* on it, and considering stronger message digests instead.
*
*/
#define MBEDTLS_SHA1_C
/**
* \def MBEDTLS_SHA224_C
*
* Enable the SHA-224 cryptographic hash algorithm.
*
* Requires: MBEDTLS_SHA256_C. The library does not currently support enabling
* SHA-224 without SHA-256.
*
* Module: library/sha256.c
* Caller: library/md.c
* library/ssl_cookie.c
*
* This module adds support for SHA-224.
*/
#define MBEDTLS_SHA224_C
/**
* \def MBEDTLS_SHA256_C
*
* Enable the SHA-224 and SHA-256 cryptographic hash algorithms.
*
* Module: library/mbedtls_sha256.c
* Caller: library/entropy.c
* library/mbedtls_md.c
* library/ssl_tls.c
* library/ssl*_client.c
* library/ssl*_server.c=
*
* This module adds support for SHA-224 and SHA-256.
* This module is required for the SSL/TLS 1.2 PRF function.
*/
#define MBEDTLS_SHA256_C
/**
* \def MBEDTLS_SHA512_C
*
* Enable the SHA-384 and SHA-512 cryptographic hash algorithms.
*
* Module: library/sha512.c
* Caller: library/entropy.c
* library/md.c
* library/ssl_tls.c
* library/ssl_cookie.c
*
* This module adds support for SHA-384 and SHA-512.
*/
#ifdef CONFIG_MBEDTLS_SHA512_C
#define MBEDTLS_SHA384_C
#define MBEDTLS_SHA512_C
#else
#undef MBEDTLS_SHA384_C
#undef MBEDTLS_SHA512_C
#endif
/**
* \def MBEDTLS_SSL_CACHE_C
*
* Enable simple SSL cache implementation.
*
* Module: library/ssl_cache.c
* Caller:
*
* Requires: MBEDTLS_SSL_CACHE_C
*/
#define MBEDTLS_SSL_CACHE_C
/**
* \def MBEDTLS_SSL_COOKIE_C
*
* Enable basic implementation of DTLS cookies for hello verification.
*
* Module: library/ssl_cookie.c
* Caller:
*/
#define MBEDTLS_SSL_COOKIE_C
/**
* \def MBEDTLS_SSL_TICKET_C
*
* Enable an implementation of TLS server-side callbacks for session tickets.
*
* Module: library/ssl_ticket.c
* Caller:
*
* Requires: (MBEDTLS_CIPHER_C) &&
* (MBEDTLS_GCM_C || MBEDTLS_CCM_C || MBEDTLS_CHACHAPOLY_C)
*/
#ifdef CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS
#define MBEDTLS_SSL_TICKET_C
#else
#undef MBEDTLS_SSL_TICKET_C
#endif
/**
* \def MBEDTLS_SSL_CLI_C
*
* Enable the SSL/TLS client code.
*
* Module: library/ssl*_client.c
* Caller:
*
* Requires: MBEDTLS_SSL_TLS_C
*
* This module is required for SSL/TLS client support.
*/
#ifdef CONFIG_MBEDTLS_TLS_CLIENT
#define MBEDTLS_SSL_CLI_C
#else
#undef MBEDTLS_SSL_CLI_C
#endif
/**
* \def MBEDTLS_SSL_SRV_C
*
* Enable the SSL/TLS server code.
*
* Module: library/ssl_srv.c
* Caller:
*
* Requires: MBEDTLS_SSL_TLS_C
*
* This module is required for SSL/TLS server support.
*/
#ifdef CONFIG_MBEDTLS_TLS_SERVER
#define MBEDTLS_SSL_SRV_C
#else
#undef MBEDTLS_SSL_SRV_C
#endif
/**
* \def MBEDTLS_SSL_TLS_C
*
* Enable the generic SSL/TLS code.
*
* Module: library/ssl_tls.c
* Caller: library/ssl*_client.c
* library/ssl*_server.c
*
* Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C
* and at least one of the MBEDTLS_SSL_PROTO_XXX defines
*
* This module is required for SSL/TLS.
*/
#ifdef CONFIG_MBEDTLS_TLS_ENABLED
#define MBEDTLS_SSL_TLS_C
#else
#undef MBEDTLS_SSL_TLS_C
#endif
/**
* \def MBEDTLS_TIMING_C
*
* Enable the semi-portable timing interface.
*
* \note The provided implementation only works on POSIX/Unix (including Linux,
* BSD and OS X) and Windows. On other platforms, you can either disable that
* module and provide your own implementations of the callbacks needed by
* \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide
* your own implementation of the whole module by setting
* \c MBEDTLS_TIMING_ALT in the current file.
*
* \note See also our Knowledge Base article about porting to a new
* environment:
* https://mbed-tls.readthedocs.io/en/latest/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS
*
* Module: library/timing.c
* Caller: library/havege.c
*
* This module is used by the HAVEGE random number generator.
*/
#ifdef MBEDTLS_TIMING_C
#undef MBEDTLS_TIMING_C
#endif
/**
* \def MBEDTLS_VERSION_C
*
* Enable run-time version information.
*
* Module: library/version.c
*
* This module provides run-time version information.
*/
#define MBEDTLS_VERSION_C
/**
* \def MBEDTLS_X509_USE_C
*
* Enable X.509 core for using certificates.
*
* Module: library/x509.c
* Caller: library/mbedtls_x509_crl.c
* library/mbedtls_x509_crt.c
* library/mbedtls_x509_csr.c
*
* Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C,
* MBEDTLS_PK_PARSE_C, MBEDTLS_MD_C
*
* This module is required for the X.509 parsing modules.
*/
#define MBEDTLS_X509_USE_C
/**
* \def MBEDTLS_X509_CRT_PARSE_C
*
* Enable X.509 certificate parsing.
*
* Module: library/mbedtls_x509_crt.c
* Caller: library/ssl_tls.c
* library/ssl*_client.c
* library/ssl*_server.c
*
* Requires: MBEDTLS_X509_USE_C
*
* This module is required for X.509 certificate parsing.
*/
#define MBEDTLS_X509_CRT_PARSE_C
/**
* \def MBEDTLS_X509_CRL_PARSE_C
*
* Enable X.509 CRL parsing.
*
* Module: library/mbedtls_x509_crl.c
* Caller: library/mbedtls_x509_crt.c
*
* Requires: MBEDTLS_X509_USE_C
*
* This module is required for X.509 CRL parsing.
*/
#ifdef CONFIG_MBEDTLS_X509_CRL_PARSE_C
#define MBEDTLS_X509_CRL_PARSE_C
#else
#undef MBEDTLS_X509_CRL_PARSE_C
#endif
/**
* \def MBEDTLS_X509_CSR_PARSE_C
*
* Enable X.509 Certificate Signing Request (CSR) parsing.
*
* Module: library/mbedtls_x509_csr.c
* Caller: library/x509_crt_write.c
*
* Requires: MBEDTLS_X509_USE_C
*
* This module is used for reading X.509 certificate request.
*/
#ifdef CONFIG_MBEDTLS_X509_CSR_PARSE_C
#define MBEDTLS_X509_CSR_PARSE_C
#else
#undef MBEDTLS_X509_CSR_PARSE_C
#endif
/**
* \def MBEDTLS_X509_CREATE_C
*
* Enable X.509 core for creating certificates.
*
* Module: library/x509_create.c
*
* Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C,
* MBEDTLS_MD_C
*
* This module is the basis for creating X.509 certificates and CSRs.
*/
#define MBEDTLS_X509_CREATE_C
/**
* \def MBEDTLS_X509_CRT_WRITE_C
*
* Enable creating X.509 certificates.
*
* Module: library/x509_crt_write.c
*
* Requires: MBEDTLS_X509_CREATE_C
*
* This module is required for X.509 certificate creation.
*/
#define MBEDTLS_X509_CRT_WRITE_C
/**
* \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
*
* Alow the X509 parser to not break-off when parsing an X509 certificate
* and encountering an unknown critical extension.
*
* Module: library/x509_crt.c
*
* Requires: MBEDTLS_X509_CRT_PARSE_C
*
* This module is supports loading of certificates with extensions that
* may not be supported by mbedtls.
*/
#ifdef CONFIG_MBEDTLS_ALLOW_UNSUPPORTED_CRITICAL_EXT
#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
#else
#undef MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
#endif
/**
* \def MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
*
* If set, this enables the X.509 API `mbedtls_x509_crt_verify_with_ca_cb()`
* and the SSL API `mbedtls_ssl_conf_ca_cb()` which allow users to configure
* the set of trusted certificates through a callback instead of a linked
* list.
*
* This is useful for example in environments where a large number of trusted
* certificates is present and storing them in a linked list isn't efficient
* enough, or when the set of trusted certificates changes frequently.
*
* See the documentation of `mbedtls_x509_crt_verify_with_ca_cb()` and
* `mbedtls_ssl_conf_ca_cb()` for more information.
*
* Uncomment to enable trusted certificate callbacks.
*/
#ifdef CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK
#define MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
#else
#undef MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK
#endif
/**
* \def MBEDTLS_X509_CSR_WRITE_C
*
* Enable creating X.509 Certificate Signing Requests (CSR).
*
* Module: library/x509_csr_write.c
*
* Requires: MBEDTLS_X509_CREATE_C
*
* This module is required for X.509 certificate request writing.
*/
#define MBEDTLS_X509_CSR_WRITE_C
/**
* \def MBEDTLS_XTEA_C
*
* Enable the XTEA block cipher.
*
* Module: library/xtea.c
* Caller:
*/
#ifdef CONFIG_MBEDTLS_XTEA_C
#define MBEDTLS_XTEA_C
#else
#undef MBEDTLS_XTEA_C
#endif
/* \} name SECTION: mbed TLS modules */
/**
* \name SECTION: Module configuration options
*
* This section allows for the setting of module specific sizes and
* configuration options. The default values are already present in the
* relevant header files and should suffice for the regular use cases.
*
* Our advice is to enable options and change their values here
* only if you have a good reason and know the consequences.
*
* Please check the respective header file for documentation on these
* parameters (to prevent duplicate documentation).
* \{
*/
/* SSL options */
#ifndef CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN
#define MBEDTLS_SSL_MAX_CONTENT_LEN CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN /**< Maxium fragment length in bytes, determines the size of each of the two internal I/O buffers */
#else
/** \def MBEDTLS_SSL_IN_CONTENT_LEN
*
* Maximum incoming fragment length in bytes.
*
* Uncomment to set the size of the inward TLS buffer independently of the
* outward buffer.
*/
#define MBEDTLS_SSL_IN_CONTENT_LEN CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN
/** \def MBEDTLS_SSL_CID_IN_LEN_MAX
*
* The maximum length of CIDs used for incoming DTLS messages.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_CID_IN_LEN_MAX CONFIG_MBEDTLS_SSL_CID_IN_LEN_MAX
#else
#undef MBEDTLS_SSL_CID_IN_LEN_MAX
#endif
/** \def MBEDTLS_SSL_CID_OUT_LEN_MAX
*
* The maximum length of CIDs used for outgoing DTLS messages.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_CID_OUT_LEN_MAX CONFIG_MBEDTLS_SSL_CID_OUT_LEN_MAX
#else
#undef MBEDTLS_SSL_CID_OUT_LEN_MAX
#endif
/** \def MBEDTLS_SSL_CID_PADDING_GRANULARITY
*
* This option controls the use of record plaintext padding
* when using the Connection ID extension in DTLS 1.2.
*
* The padding will always be chosen so that the length of the
* padded plaintext is a multiple of the value of this option.
*
* Note: A value of \c 1 means that no padding will be used
* for outgoing records.
*
* Note: On systems lacking division instructions,
* a power of two should be preferred.
*
*/
#ifdef CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID
#define MBEDTLS_SSL_CID_PADDING_GRANULARITY CONFIG_MBEDTLS_SSL_CID_PADDING_GRANULARITY
#else
#undef MBEDTLS_SSL_CID_PADDING_GRANULARITY
#endif
/** \def MBEDTLS_SSL_OUT_CONTENT_LEN
*
* Maximum outgoing fragment length in bytes.
*
* Uncomment to set the size of the outward TLS buffer independently of the
* inward buffer.
*
* It is possible to save RAM by setting a smaller outward buffer, while keeping
* the default inward 16384 byte buffer to conform to the TLS specification.
*
* The minimum required outward buffer size is determined by the handshake
* protocol's usage. Handshaking will fail if the outward buffer is too small.
* The specific size requirement depends on the configured ciphers and any
* certificate data which is sent during the handshake.
*
* For absolute minimum RAM usage, it's best to enable
* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH and reduce MBEDTLS_SSL_MAX_CONTENT_LEN. This
* reduces both incoming and outgoing buffer sizes. However this is only
* guaranteed if the other end of the connection also supports the TLS
* max_fragment_len extension. Otherwise the connection may fail.
*/
#define MBEDTLS_SSL_OUT_CONTENT_LEN CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN
#endif /* !CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN */
/**
* Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake
* signature and ciphersuite selection. Without this build-time option, SHA-1
* support must be activated explicitly through mbedtls_ssl_conf_sig_hashes.
* The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by
* default. At the time of writing, there is no practical attack on the use
* of SHA-1 in handshake signatures, hence this option is turned on by default
* for compatibility with existing peers.
*
* \warning SHA-1 is considered a weak message digest and its use constitutes
* a security risk. If possible, we recommend avoiding dependencies
* on it, and considering stronger message digests instead.
*/
#define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE
/**
* \def MBEDTLS_THREADING_C
*
* Enable the threading abstraction layer.
* By default mbed TLS assumes it is used in a non-threaded environment or that
* contexts are not shared between threads. If you do intend to use contexts
* between threads, you will need to enable this layer to prevent race
* conditions. See also our Knowledge Base article about threading:
* https://mbed-tls.readthedocs.io/en/latest/kb/development/thread-safety-and-multi-threading
*
* Module: library/threading.c
*
* This allows different threading implementations (self-implemented or
* provided).
*
* You will have to enable either MBEDTLS_THREADING_ALT or
* MBEDTLS_THREADING_PTHREAD.
*
* Enable this layer to allow use of mutexes within mbed TLS
*/
#ifdef CONFIG_MBEDTLS_THREADING_C
#define MBEDTLS_THREADING_C
#else
#undef MBEDTLS_THREADING_C
#endif
/**
* \def MBEDTLS_THREADING_ALT
*
* Provide your own alternate threading implementation.
*
* Requires: MBEDTLS_THREADING_C
*
* Uncomment this to allow your own alternate threading implementation.
*/
#ifdef CONFIG_MBEDTLS_THREADING_ALT
#define MBEDTLS_THREADING_ALT
#else
#undef MBEDTLS_THREADING_ALT
#endif
/**
* \def MBEDTLS_THREADING_PTHREAD
*
* Enable the pthread wrapper layer for the threading layer.
*
* Requires: MBEDTLS_THREADING_C
*
* Uncomment this to enable pthread mutexes.
*/
#ifdef CONFIG_MBEDTLS_THREADING_PTHREAD
#define MBEDTLS_THREADING_PTHREAD
#else
#undef MBEDTLS_THREADING_PTHREAD
#endif
/**
* \def MBEDTLS_NIST_KW_C
*
* Enable AES key wrapping as per NIST
*
* Requires: MBEDTLS_AES_C
*
* Uncomment this to enable aes key wrap.
*/
#ifdef CONFIG_MBEDTLS_NIST_KW_C
#define MBEDTLS_NIST_KW_C
#else
#undef MBEDTLS_NIST_KW_C
#endif
/* \} name SECTION: Module configuration options */
#if defined(TARGET_LIKE_MBED)
#include "mbedtls/target_config.h"
#endif
/*
* Allow user to override any previous default.
*
* Use two macro names for that, as:
* - with yotta the prefix YOTTA_CFG_ is forced
* - without yotta is looks weird to have a YOTTA prefix.
*/
#if defined(YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE)
#include YOTTA_CFG_MBEDTLS_USER_CONFIG_FILE
#elif defined(MBEDTLS_USER_CONFIG_FILE)
#include MBEDTLS_USER_CONFIG_FILE
#endif
/* This flag makes sure that we are not using
* any function that is deprecated by mbedtls */
#define MBEDTLS_DEPRECATED_REMOVED
#endif /* ESP_CONFIG_H */