Skip to content
Permalink
042dbffdd5
Switch branches/tags
Go to file
 
 
Cannot retrieve contributors at this time
executable file 231 lines (222 sloc) 9.21 KB
#!/bin/bash
# This file is part of Espruino, a JavaScript interpreter for Microcontrollers
#
# Copyright (C) 2017 Gordon Williams <gw@pur3.co.uk>
# wilberforce (Rhys Williams)
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
#
# -----------------------------------------------------------------------------
# Setup toolchain and libraries for build targets, installs if missing
# set env vars for builds
# For use in:
# Travis
# Firmware builds
# Docker
#
# -----------------------------------------------------------------------------
if [ $# -eq 0 ]
then
echo "USAGE:"
echo " source scripts/provision.sh {BOARD}"
echo " source scripts/provision.sh ALL"
return 1
fi
# set the current board
BOARDNAME=$1
if [ "$BOARDNAME" = "ALL" ]; then
echo "Installing dev tools for all boards"
PROVISION_ESP32=1
PROVISION_ESP8266=1
PROVISION_LINUX=1
PROVISION_NRF52=1
PROVISION_NRF51=1
PROVISION_NRF_SDK15=1
PROVISION_STM32F1=1
PROVISION_STM32F4=1
PROVISION_STM32L4=1
PROVISION_RASPBERRYPI=1
else
FAMILY=`scripts/get_board_info.py $BOARDNAME 'board.chip["family"]'`
if [ "$FAMILY" = "" ]; then
echo "UNKNOWN BOARD ($BOARDNAME)"
return 1
fi
export PROVISION_$FAMILY=1
export PROVISION_$BOARDNAME=1
if python scripts/get_makefile_decls.py $BOARDNAME | grep NRF_SDK15; then
PROVISION_NRF_SDK15=1
fi
fi
echo Provision BOARDNAME = $BOARDNAME
echo Provision FAMILY = $FAMILY
if [ "$PROVISION_ESP32" = "1" ]; then
echo ===== ESP32
# needed for esptool for merging binaries
if pip --version 2>/dev/null; then
echo python/pip installed
else
echo Installing python/pip pyserial
sudo DEBIAN_FRONTEND=noninteractive apt-get install -qq -y python python-pip
fi
if pip list 2>/dev/null | grep pyserial >/dev/null; then
echo pyserial installed;
else
echo Installing pyserial
sudo pip -q install pyserial
fi
# SDK
if [ ! -d "app" ]; then
echo installing app folder
curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/master/esp32/deploy/app.tgz | tar xfz - --no-same-owner
#curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/ESP32-V3.1/esp32/deploy/app.tgz | tar xfz - --no-same-owner
fi
if [ ! -d "esp-idf" ]; then
echo installing esp-idf folder
curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/master/esp32/deploy/esp-idf.tgz | tar xfz - --no-same-owner
#curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/ESP32-V3.1/esp32/deploy/esp-idf.tgz | tar xfz - --no-same-owner
fi
if ! type xtensa-esp32-elf-gcc 2> /dev/null > /dev/null; then
echo installing xtensa-esp32-elf-gcc
if [ ! -d "xtensa-esp32-elf" ]; then
#curl -Ls https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-80-g6c4433a-5.2.0.tar.gz | tar xfz - --no-same-owner
curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/master/esp32/xtensa-esp32-elf-linux64-1.22.0-80-g6c4433a-5.2.0.tar.gz | tar xfz - --no-same-owner
else
echo "Folder found"
fi
fi
export ESP_IDF_PATH=`pwd`/esp-idf
export ESP_APP_TEMPLATE_PATH=`pwd`/app
export PATH=$PATH:`pwd`/xtensa-esp32-elf/bin/
echo GCC is $(which xtensa-esp32-elf-gcc)
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_ESP8266" = "1" ]; then
echo ===== ESP8266
if [ ! -d "ESP8266_NONOS_SDK-2.2.1" ]; then
echo ESP8266_NONOS_SDK-2.2.1
curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/master/esp8266/ESP8266_NONOS_SDK-2.2.1.tar.gz | tar xfz - --no-same-owner
fi
if ! type xtensa-lx106-elf-gcc 2> /dev/null > /dev/null; then
echo installing xtensa-lx106-elf-gcc
if [ ! -d "xtensa-lx106-elf" ]; then
curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/master/esp8266/xtensa-lx106-elf-20160330.tgx | tar Jxf - --no-same-owner
else
echo "Folder found"
fi
fi
export ESP8266_SDK_ROOT=`pwd`/ESP8266_NONOS_SDK-2.2.1
export PATH=$PATH:`pwd`/xtensa-lx106-elf/bin/
echo GCC is $(which xtensa-lx106-elf-gcc)
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_LINUX" = "1" ]; then
echo ===== LINUX
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_RASPBERRYPI" = "1" ]; then
echo ===== RASPBERRYPI
if [ ! -d "targetlibs/raspberrypi" ]; then
echo Installing Raspberry pi tools
mkdir targetlibs/raspberrypi
cd targetlibs/raspberrypi
git clone --depth=1 https://github.com/raspberrypi/tools
# wiringpi?
cd ../..
fi
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_NRF52" = "1" ]; then
echo ===== NRF52
if ! type pip 2> /dev/null > /dev/null; then
echo Installing python and pip
sudo DEBIAN_FRONTEND=noninteractive apt-get install -qq -y python python-pip
fi
if ! type nrfutil 2> /dev/null > /dev/null; then
echo Installing nrfutil
sudo pip install --ignore-installed nrfutil protobuf==3.17.3
# --ignore-installed is used because pip 10 fails because PyYAML was already installed by the system
# protobuf-3.17.3 is required because it seems protobuf-3.18 which auto-installs as of ~15 sept 2021 is incompatible with Python 2.7
# -q can be used to silence the above
fi
ARM=1
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_NRF51" = "1" ]; then
ARM=1
fi
if [ "$PROVISION_NRF_SDK15" = "1" ]; then
if [ ! -d "targetlibs/nrf5x_15/components" ]; then
echo Installing NRF SDK 15.0 to targetlibs/nrf5x_15/components
# curl https://developer.nordicsemi.com/nRF5_SDK/nRF5_SDK_v15.x.x/nRF5_SDK_15.0.0_a53641a.zip -o nRF5_SDK_15.0.0_a53641a.zip
curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/master/nrf52/nRF5_SDK_15.0.0_a53641a_no_docs_unix.zip -o nRF5_SDK_15.0.0_a53641a.zip
# This is nRF5_SDK_15.0.0_a53641a.zip without the docs/examples folder, and with line endings converted to unix (for patch)
unzip -q -o nRF5_SDK_15.0.0_a53641a.zip
mv nRF5_SDK_15.0.0_a53641a/* targetlibs/nrf5x_15
mv nRF5_SDK_15.0.0_a53641a/external/* targetlibs/nrf5x_15/external
rm -rf nRF5_SDK_15.0.0_a53641a.zip nRF5_SDK_15.0.0_a53641a
echo ======================================================
echo "FIXME - SDK15 NFC patches don't apply cleanly"
echo ======================================================
cat targetlibs/nrf5x_15/patches/* | patch -p1
fi
fi
if [ "$PROVISION_NRF_SDK17" = "1" ]; then
if [ ! -d "targetlibs/nrf5x_17/components" ]; then
echo Installing NRF SDK 17.0 to targetlibs/nrf5x_17/components
curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/master/nrf52/nRF5SDK1702d674dde.zip -o nRF5_SDK_17.zip
# This is nRF5_SDK_15.0.0_a53641a.zip without the docs/examples folder, and with line endings converted to unix (for patch)
unzip -q -o nRF5_SDK_17.zip
mv nRF5_SDK_17.0.2_d674dde/* targetlibs/nrf5x_17
mv nRF5_SDK_17.0.2_d674dde/external/* targetlibs/nrf5x_17/external
rm -rf nRF5_SDK_17.zip nRF5_SDK_17.0.2_d674dde
echo ======================================================
cat targetlibs/nrf5x_17/patches/* | patch -p1
fi
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_STM32F1" = "1" ]; then
ARM=1
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_STM32F3" = "1" ]; then
ARM=1
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_STM32F4" = "1" ]; then
ARM=1
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_STM32L4" = "1" ]; then
ARM=1
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_EFM32GG" = "1" ]; then
ARM=1
fi
#--------------------------------------------------------------------------------
if [ "$PROVISION_SAMD" = "1" ]; then
ARM=1
fi
#--------------------------------------------------------------------------------
if [ "$ARM" = "1" ]; then
# defaulting to ARM
echo ===== ARM
if type arm-none-eabi-gcc 2> /dev/null > /dev/null; then
echo arm-none-eabi-gcc installed
else
echo installing gcc-arm-embedded
#sudo add-apt-repository -y ppa:team-gcc-arm-embedded/ppa
#sudo apt-get update
#sudo DEBIAN_FRONTEND=noninteractive apt-get --force-yes --yes install libsdl1.2-dev gcc-arm-embedded
# Unpack - newer, and much faster
if [ ! -d "gcc-arm-none-eabi-8-2018-q4-major" ]; then
curl -Ls https://github.com/espruino/EspruinoBuildTools/raw/master/arm/gcc-arm-none-eabi-8-2018-q4-major-linux.tar.bz2 | tar xfj - --no-same-owner
else
echo "Folder found"
fi
export PATH=$PATH:`pwd`/gcc-arm-none-eabi-8-2018-q4-major/bin
fi
fi